Materials Engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Structural Engineer performs the task of managing the documentation of the structural drawings in coordination with architectural and MEP Works. As well as designing new builds, they have to ensure older structures remain safe, and often design renovation schemes to ensure long life for existing structures.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Responsible to plan and conduct independent work requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria.</p><br> <p>Assists/devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices.</p><br> <p>Analyze and configure the basic structural components of a building or other structure for ensuring the quality of design.</p><br> <p>Ensure to review the design criteria (basic structural components, geotechnical properties, wind loads, seismic loads, loads, fire protection ….) and ensure adequacy of design.</p><br> <p>Ensure to analyze the structural elements to ensure the quality of the design.</p><br> <p>Ensure to analyze and review the loading plan and ensure compliance with codes and the project operational purpose.</p><br> <p>Ensure to determine the pressures that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes.</p><br> <p>Ensure to study the impact of the temporary works (formwork, tower cranes foundations and supports) on the structural elements, provide calculations, details and ensure compliance.</p><br> <p>Liaise with designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction of the proposed project.</p><br> <p>Ensure to provide safe structural solutions to suite the architectural and MEP requirements.</p><br> <p>Prepare shop drawings with all necessary details in accordance to the tender drawings in order to submit to the consultant for the approval.</p><br> <p>Ensure to review the tender DWGs VS IFC DWGs and provide report of changes to the technical manger for the commercial department.</p><br> <p>Ensure to provide material list for all the structural elements in the project as per the time schedule.</p><br> <p>Ensure to timely prepare / contribute in preparation of the technical packages related to the structural scope.</p><br> <p>Ensure to review technically the structural related offers provided by procurements and ensure adherence to codes and project design.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Extensive structural knowledge for Buildings, Heavy Civils and Infrastructure works. Knowledge in preparing</p><br> <p>reports, designs and drawings. Ability to liaise confidently with the client on structural matters. Ability to review a</p><br> <p>structural problem / anomaly, determine its possible causes and make recommendations for rectification.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Cost Management L3<br>Drawings/Specifications L3<br>QA/QC L3<br>Geotechnical Engineering L3<br>Agility<br>HSE L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or Structural Engineering<br>Profesional degree in MMUP Engineer Registration (UPDA)<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>Seeking a Structural Engineer with 10+ years of experience in construction supervision and structural engineering for large-scale, mission-critical developments, including data centers. The role will be responsible for overseeing structural works, ensuring compliance with design requirements, quality standards, and seamless coordination with civil, architectural, and MEP disciplines throughout project delivery.</p><br>Your role<ul><li>Supervise structural construction works to ensure compliance with approved drawings, specifications, and project requirements.</li><li>Inspect reinforced concrete works including foundations, pile caps, slabs, columns, beams, and structural walls.</li><li>Review and monitor structural steel fabrication, erection, welding, and bolting activities.</li><li>Verify installation of equipment plinths, steel platforms, equipment supports, and housekeeping pads for critical data center infrastructure.</li><li>Coordinate structural interfaces with architectural, civil, mechanical, electrical, and specialist systems.</li><li>Review and assess MEP penetrations through structural elements to ensure structural integrity and compliance with approved designs.</li><li>Monitor builders' works associated with cable trays, pipe supports, equipment foundations, and service openings.</li><li>Conduct site inspections, witness testing activities, and maintain QA/QC inspection records.</li><li>Review contractor shop drawings, material submittals, method statements, and inspection requests related to structural works.</li><li>Identify construction defects, non-conformities, and coordinate corrective actions with contractors.</li><li>Ensure all structural works comply with applicable codes, standards, project specifications, and safety requirements.</li><li>Participate in multidisciplinary coordination meetings to resolve technical and interface issues.</li><li>Monitor contractor progress and report on structural work status, risks, and potential delays.</li><li>Support testing, commissioning readiness reviews, snagging inspections, and project handover activities.</li><li>Prepare inspection reports, site observation reports, NCRs, and technical recommendations for project management and clients.</li></ul>About you<ul><li>Bachelor's degree in Civil or Structural Engineering. UPDA/MMUP Grade A</li><li>Data Center Experience [ at least 1 project is delivered in the last 5 years] is preferred.</li><li><span>10+ years of experience.</span></li><li><span>Structural works supervision, concrete/steel inspection, MEP penetrations, equipment plinths, supports, builders' works, structural interfaces and QA/QC inspection records.</span></li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Install, configure, commission, and maintain autonomous mobile robots (AMRs) and robotic solutions.</p></li><li><p>Support Security Patrol and Inspection Robots for surveillance, monitoring, and facility management applications.</p></li><li><p>Deploy and maintain Industrial and Commercial Floor Cleaning Robots.</p></li><li><p>Support Industrial Handling Robots for material transportation and warehouse operations.</p></li><li><p>Implement Production Line Loading and Unloading Robotic Solutions.</p></li><li><p>Perform troubleshooting, diagnostics, preventive maintenance, and corrective maintenance.</p></li><li><p>Configure and replace (if required) sensors, LiDAR, cameras, navigation systems, and other relevant integrated components.</p></li><li><p>Conduct site surveys and prepare deployment plans.</p></li><li><p>Provide technical demonstrations and customer training.</p></li><li><p>Coordinate with manufacturers and technology partners for technical support.</p></li><li><p>Prepare technical reports, documentation, and maintenance records.</p></li><li><p>Ensure robots operate safely and efficiently according to customer requirements.</p></li><li><p>Support pilot projects, and Proof of Concept (POC) deployments.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are looking for experienced Robotics Engineers for our Robotics and A.I lab and service center in Qatar in Qatar. The selected candidates will be responsible for the deployment, integration, testing, maintenance, and technical support of autonomous robots used in security patrol, inspection, customer engagement, industrial handling, cleaning and production line automation applications. The role requires strong technical knowledge of robotics systems, autonomous navigation, sensors, industrial automation, and customer-facing project execution. <strong>Required Qualifications</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bachelor's Degree in Engineering</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Minimum 3 to 5 years of experience in robotics, automation, or autonomous systems.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience working with autonomous mobile robots (AMRs), service robots, or industrial robots.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of robotic navigation, SLAM, LiDAR, sensors, and machine vision systems.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Familiarity with industrial communication protocols and networking.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience in robot deployment, commissioning, and field support.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Strong troubleshooting and problem-solving skills.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ability to work independently and at customer sites.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Good communication and presentation skills.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Valid driving license is preferred.</p><p><strong>Preferred Experience</strong></p><p>Candidates with hands-on operational and trouble-shooting experience in one or more of the following will be highly preferred:</p><ul><li><p>Security Patrol &amp; Inspection Robots</p></li><li><p>Commercial &amp; Industrial Floor Cleaning Robots</p></li><li><p>Warehouse and Material Handling Robots</p></li><li><p>Production Line Automation</p></li><li><p>Loading &amp; Unloading Robotic Systems</p></li><li><p>Autonomous Mobile Robots (AMRs)</p></li><li><p>ROS (Robot Operating System)</p></li><li><p>AI-based Robotics Solutions</p></li></ul><p><strong><br></strong></p><p><strong>&nbsp;</strong></p><p><strong>Technical Skills</strong></p><ul><li><p>Robotics System Integration</p></li><li><p>ROS / ROS2</p></li><li><p>LiDAR and Sensor Integration</p></li><li><p>Autonomous Navigation Systems</p></li><li><p>Computer Vision</p></li><li><p>Linux Environment</p></li><li><p>Networking and Communication Systems</p></li><li><p>PLC Integration (Preferred)</p></li><li><p>Industrial Automation</p></li><li><p>Python / C++ (Preferred)</p></li></ul><br><p><strong>Salary &amp; Benefits</strong></p><ul><li><p>Competitive Salary (Based on Experience)</p></li><li><p>Accommodation Allowance (as per company policy)</p></li><li><p>Transportation Allowance.</p></li><li><p>Medical Insurance.</p></li><li><p>Annual Leave and Air Ticket as per Qatar Labour Law.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44206&nbsp;&nbsp; <br> <br>Position description Job title <p>Material Planning Specialist M/F</p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>3 years</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy, Qatar, for a:</p><br><br><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;<strong>Material Planning Specialist</strong></p><br><br><br><p>Job Purpose:</p><br><br><p>Main actor on the contribution to the development and improvement of sustainable system for material management and Planning<br>The position will be interfacing with other entities within the NOC. He will be the representative on the management and improvement of the work process developed through SAP System, including communication with the Warehouse and others stakeholders within the M&amp;I organization</p><br><br><br><p>Your main duties will be to: -</p><br><br><br><ul><li>Responsible to create processes and procedures to support maintenance material management and drive continuous improvement.</li><li>Drive an Incident Free environment through establishing and maintaining a strong safety culture.<br>• Responsible for ensuring positive HSE performance by personnel, contractors and others working under the influence of the position.<br>• Ensuring compliance with HSE legislation, company standards and procedures under the area of responsibility to ensure employee safety, legislative compliance and responsible environmental attitude.<br>• Identify opportunities to improve efficiency of all Maintenance material management activities, processes and procedures.• Provide first level specialist advice and guidance to onshore and Site / offshore personnel on the management / movement of Maintenance related materials.<br>• Provide administrative support to onshore / Site / offshore personnel on the management / movement of Maintenance related materials.<br>• Act as focal, in liaison with Warehouse personnel, to ensure continuous flow of materials / equipment for repair / refurbishment and return to stock / offshore.<br>• Liaise with Maintenance stakeholders to ensure effective and efficient management of materials.<br>• Interface with the Campaign / Shutdown &amp; Base Operation Material Coordinators to ensure efficient tracking / bagging and tagging of materials.<br>• Interface with Warehouse personnel to ensure robust material management and storage / preservation of Maintenance related materials.<br>• Interface with Warehouse personnel / Contactors to ensure adequate management, refurbishment / replenishment and storage of Special Tooling, Turbine Kits etc.<br>• Support the repair process for Maintenace related equipment, which may include visits to local vendor workshops and warehouses.<br>• Act as focal for QA / QC material status / issues in liaison with the Technical Materials Administrator (TADM).<br>• Participate, as appropriate, in Maintenance material management / Warehouse audits.<br>• Ensure all related certification / documentation is coordinated and managed / stored effectively utilising NOC Document management processes and procedures.</li></ul><br> <br> Profile <br><br><br><p>Bachelor's Degree in Engineering or a related discipline.<br>Extensive experience and strong knowledge of Material Management, Warehouse Operations, Logistics, and associated business processes.<br>Minimum 10 years of experience in the Oil &amp; Gas industry, preferably in a Warehouse, Logistics, or Materials Management environment.<br>Proven experience working with computerized maintenance management systems such as SAP and PALM.<br>Strong proficiency in Microsoft Office Suite, including Word, Excel, Outlook, and other business applications.<br>Good understanding and practical knowledge of Primavera planning and scheduling tools.<br>Sound understanding and application of industry process safety standards, guidelines, and procedures.<br>Strong knowledge of equipment maintenance processes, inventory control, material planning, and warehouse management practices.<br>Excellent command of the English language, with strong written and verbal communication skills.<br>Effective interpersonal, organizational, and coordination skills with the ability to work in a multidisciplinary environment.<br>Strong analytical and problem-solving abilities with a high level of computer literacy.</p><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> Doha, Qatar <br>Candidate criteria Minimum level of experience required <p>6 years or more</p><br><br> Required authorisations <br><p>FTW</p><br><br> <br> Languages <p>English (C-Professional working proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities</p><br><br> <br> <br><br> </div>

Description<br><br>Position at Al Jazeera Media Network<br><br>Senior Fire & Life Safety Engineer (12-Month Contract)<br><br>Contract Type: Freelance (12 Months)<br><br>Location: Doha, Qatar<br><br>Al Jazeera Media Network is seeking an experienced Senior Fire & Life Safety Engineer to oversee fire protection, life safety compliance, and risk mitigation across the Network, technical facilities, studios, and critical infrastructure.<br><br>Key Responsibilities<br><br>Lead fire and life safety inspections, audits, investigations, and compliance reviews across AJMN facilities. Ensure all fire detection, alarm, suppression, and life safety systems are fully operational and compliant with applicable codes and standards. Review and approve fire protection designs, shop drawings, material submissions, and as-built documentation. Monitor contractor and vendor performance, conduct site inspections, and manage punch lists through completion. Support construction, renovation, and expansion projects by providing fire and life safety expertise. Conduct annual facility assessments and recommend corrective actions and risk mitigation measures. Deliver fire safety training and awareness programs. Participate in tender evaluations and technical assessments of contractors and suppliers. Prepare reports, recommendations, and presentations for management and stakeholders.<br><br>Requirements<br><br>Bachelor's Degree in Fire Protection Engineering, Engineering, or a related discipline. Minimum 5 years' experience in Fire & Life Safety, Fire Protection Engineering, or a similar role. Strong knowledge of international fire codes, standards, and compliance requirements. Experience reviewing construction projects, fire systems, and technical infrastructure. Excellent communication, reporting, and stakeholder management skills. Ability to work independently in a complex operational environment.<br><br>Contract Type: Freelance (12 Months)<br><br>Location: Doha, Qatar

Description<br><br>Position at Al Jazeera Media Network<br><br>Senior Fire & Life Safety Engineer (12-Month Contract)<br><br>Contract Type: Freelance (12 Months)<br><br>Location: Doha, Qatar<br><br>Al Jazeera Media Network is seeking an experienced Senior Fire & Life Safety Engineer to oversee fire protection, life safety compliance, and risk mitigation across the Network, technical facilities, studios, and critical infrastructure.<br><br>Key Responsibilities<br><br>Lead fire and life safety inspections, audits, investigations, and compliance reviews across AJMN facilities. Ensure all fire detection, alarm, suppression, and life safety systems are fully operational and compliant with applicable codes and standards. Review and approve fire protection designs, shop drawings, material submissions, and as-built documentation. Monitor contractor and vendor performance, conduct site inspections, and manage punch lists through completion. Support construction, renovation, and expansion projects by providing fire and life safety expertise. Conduct annual facility assessments and recommend corrective actions and risk mitigation measures. Deliver fire safety training and awareness programs. Participate in tender evaluations and technical assessments of contractors and suppliers. Prepare reports, recommendations, and presentations for management and stakeholders.<br><br>Requirements<br><br>Bachelor's Degree in Fire Protection Engineering, Engineering, or a related discipline. Minimum 5 years' experience in Fire & Life Safety, Fire Protection Engineering, or a similar role. Strong knowledge of international fire codes, standards, and compliance requirements. Experience reviewing construction projects, fire systems, and technical infrastructure. Excellent communication, reporting, and stakeholder management skills. Ability to work independently in a complex operational environment.<br><br>Contract Type: Freelance (12 Months)<br><br>Location: Doha, Qatar

Are you a skilled Service Engineer with experience in low-voltage (LV) switchgear systems? Do you enjoy solving technical challenges, working directly with customers, and delivering high-quality after-sales support?<br>Join Jaidah Group and become part of a dynamic team committed to providing exceptional technical service and innovative engineering solutions.<br>Key Responsibilities Install, commission, test, and troubleshoot low-voltage switchgear systems at customer sites. Perform preventive, predictive, and corrective maintenance to ensure equipment reliability and maximum uptime. Diagnose electrical and mechanical faults and implement effective corrective actions. Respond promptly to customer service requests, breakdowns, and emergency callouts. Prepare technical service reports, inspection records, and maintenance recommendations. Ensure all service activities comply with company procedures, safety standards, and industry regulations. Coordinate with customers, sales teams, and technical support departments to resolve technical issues. Conduct equipment condition assessments and recommend repairs, upgrades, retrofits, and spare parts. Deliver operational guidance and maintenance training to customer maintenance teams. Prepare Operation & Maintenance (O&M) manuals, training materials, and project handover documentation. Support factory inspections and audits by providing the required technical documentation.<br>Qualifications & Skills Bachelor's Degree or Diploma in Electrical Engineering or a related discipline. Experience in installation, commissioning, and maintenance of LV Switchgear systems. Strong troubleshooting and fault-finding skills in electrical and mechanical systems. Good knowledge of electrical drawings, technical documentation, and maintenance procedures. Excellent communication and customer service skills. Ability to work independently and manage multiple service assignments. Willingness to travel to customer sites and respond to emergency service requirements.<br>Why Join Jaidah Group? Work with one of Qatar's leading and most respected business groups. Be part of a professional engineering team delivering innovative solutions. Gain exposure to challenging projects and advanced electrical technologies. Enjoy opportunities for continuous learning and career development. Contribute to a company that values safety, quality, teamwork, and customer satisfaction.<br>Ready to take the next step in your engineering career? Apply today and become part of our growing team!

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Description – QA/QC Engineer</strong><br> <strong>Department</strong><br> Operations / Engineering Support / Projects <strong>Job Purpose</strong><br> Provide expertise and support for QA/QC implementation across engineering, design, procurement, construction, and installation activities for new equipment and modifications to onshore/offshore facilities. Ensure compliance with applicable codes, standards, specifications, and company policies. <strong>Reporting &amp; Relationships</strong><ul><li>Reports to: Head of Engineering / Functional Manager</li><li>Internal stakeholders:<ul><li>Operations Team</li><li>Project Management Team</li><li>Engineering &amp; HSE Departments</li></ul></li><li>External stakeholders:<ul><li>EPC contractors</li><li>Vendor &amp; suppliers</li><li>Third-party inspection agencies</li><li>Engineering consultants</li></ul></li></ul><strong>Key Responsibilities</strong><ul><li>Coordinate QA/QC activities of inspectors, engineers, and NDT technicians in line with project and maintenance requirements</li><li>Support procurement activities by reviewing requisitions, specifications, and inspection requirements</li><li>Review and analyse:<ul><li>Welding Procedure Specifications (WPS)</li><li>Procedure Qualification Records (PQR)</li><li>QA/QC reports and inspection records</li></ul></li><li>Ensure material quality from procurement stage through to final receipt</li><li>Conduct metallurgical and failure analysis on equipment and components</li><li>Participate in:<ul><li>Startup readiness activities</li><li>Risk assessments (FRA)</li><li>Management of Change (MOC)</li><li>Root Cause Failure Analysis (RCFA)</li></ul></li><li>Provide QA/QC input into maintenance contracts, scope of work (SOW), and technical bid evaluations</li><li>Conduct and support supplier and contractor audits on quality management systems</li><li>Ensure compliance with QA/QC procedures during repairs, shutdowns, and modifications</li><li>Support inspection and certification activities for equipment such as:<ul><li>Gas cylinders</li><li>Lifting equipment</li><li>Portable tanks</li></ul></li><li>Promote quality awareness through training, knowledge sharing, and procedural guidance</li><li>Assist in development and updates of QA/QC procedures and standards</li></ul><strong>Job Challenges</strong><ul><li>Providing technical judgment on equipment repair, failure, and modifications</li><li>Ensuring quality control across multiple project phases and stakeholders</li><li>Balancing operational urgency with quality and compliance requirements</li></ul><strong>Qualifications</strong><ul><li>Bachelor’s Degree in Engineering</li><li>Certifications in QA/QC, Welding, NDT, Inspection, or Auditing (preferred)</li></ul><strong>Experience</strong><ul><li>Minimum <strong>4+ years</strong> of QA/QC experience in oil &amp; gas, petrochemical, or heavy industrial projects</li><li>Experience across:<ul><li>Engineering and design</li><li>Procurement and vendor inspection</li><li>Fabrication and installation</li><li>Welding and NDT practices</li></ul></li></ul><strong>Technical Skills</strong><ul><li>Strong knowledge of QA/QC standards and codes</li><li>Understanding of welding, metallurgy, and inspection techniques</li><li>Ability to review technical documents and inspection reports</li><li>Data analysis and reporting capability</li><li>Proficiency in MS Office and QA/QC systems</li></ul><strong>Behavioral Competencies</strong><ul><li>Strong communication and interpersonal skills</li><li>Team collaboration and coordination</li><li>Problem-solving and analytical thinking</li><li>Planning and organizational ability</li><li>Commitment to safety, quality, and continuous improvement</li></ul><strong>Compliance &amp; Safety</strong><ul><li>Ensure adherence to Safety, Health, Environment (SHE) policies</li><li>Comply with all applicable legal and regulatory requirements</li><li>Maintain ethical standards and professional integrity</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

We are looking to hire a talented QA/QC Engineer - large-scale building projects, for one of our clients, based in Qatar, Ras Laffan.<br><br>General requirements:<br><br>Have proven experience in large-scale building construction projects, including residential, accommodation, mixed-use, institutional, or similar developments Demonstrate successful delivery of projects of comparable scale and complexity Have previous experience in Qatar; GCC experience may be considered as an alternative Hold relevant academic qualifications in Engineering or related disciplines Possess valid MMUP/UPDA registration (preferred for candidates currently in Qatar and mandatory where applicable) Be capable of communicating fluently in English (written and verbal) Demonstrate strong leadership, coordination, and stakeholder management skills Be familiar with Qatar Energy, major clients, consultants, and local authority requirements (preferred)<br><br><br>Requirements<br><br>Implement quality assurance and quality control requirements and support inspection and testing activities Degree in Engineering Minimum 8-10 years of QA/QC experience Experience in building construction projects Familiarity with ITPs, method statements, inspections, material approvals, and quality documentation Knowledge of ISO 9001 quality management systems MMUP/UPDA certification preferred for candidates currently in Qatar

ISS International Spa is looking for a Piping and Layout Engineer with offshore experience in Doha, Qatar.<br><br>Responsibilities:<br><br>Support Bidding phase / Commercial proposal development on: Bill of material, Plot plan lay out proposal and define man hour and cost estimate Ensure the Piping and Layout engineering support to different projects Analyze technical documents (eg specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks Estimate quantities or validate estimation done by other specialists of the team Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines Monitor and report actual progress including 3D / check for Discipline activities, including control of men-hours and delivered documents Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk<br><br>Other Details:<br><br>Location - Doha Duration - 6 months with possibility of extension

Location: Doha, Qatar Experience Required: 10–15 Years Language Requirement: Fluent English (Speaking and Writing) Job Description We are seeking an experienced and qualified Landscape Engineer with 10–15 years of professional experience in landscape construction, irrigation systems, horticulture, and project management. The ideal candidate will be responsible for planning, supervising, and executing landscaping projects while ensuring quality, safety, and compliance with project specifications. Key Responsibilities Manage and supervise landscape construction and maintenance projects. Review landscape drawings, specifications, and project requirements. Coordinate with clients, consultants, contractors, and project teams. Monitor project progress, quality standards, and deadlines. Supervise installation of softscape, hardscape, and irrigation systems. Prepare project reports, work schedules, and material requirements. Ensure compliance with safety regulations and company policies. Conduct site inspections and resolve technical issues. Manage project budgets and control project costs. Train and supervise site engineers, supervisors, and workers. Requirements Bachelor's Degree in Landscape Engineering, Agricultural Engineering, Civil Engineering, or a related field. 10–15 years of proven experience in landscape engineering and project execution. Strong knowledge of landscape construction, irrigation systems, planting, and maintenance. Experience in GCC countries is preferred. Excellent project management and leadership skills. Ability to read and interpret engineering drawings and specifications. Proficiency in MS Office, Auto CAD, and related engineering software. Fluent English speaking and writing skills are mandatory. Valid driving license is preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Procurement Engineer is responsible for the procurement or purchasing of technical goods and services of operation. Evaluates new and existing suppliers and negotiate purchase agreements with them. This position ensures that purchased goods and services are delivered in a timely manner.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Develop and implement procurement strategies to support project objectives, cost targets, and quality requirements.</p><br> <p>Collaborate with project managers, engineers, and stakeholders to understand project specifications and procurement needs.</p><br> <p>Source and evaluate potential suppliers, conducting market research and supplier assessments to identify qualified vendors.</p><br> <p>Negotiate contracts, terms, and pricing agreements with suppliers to achieve cost savings and ensure delivery of quality materials and equipment.</p><br> <p>Review technical specifications and drawings to ensure alignment with project requirements and engineering standards.</p><br> <p>Manage the procurement process from requisition to delivery, including issuing purchase orders, tracking shipments, and resolving delivery issues.</p><br> <p>Monitor supplier performance, conducting regular audits and evaluations to assess compliance with contract terms and quality standards.</p><br> <p>Identify opportunities for process improvements and cost savings in procurement operations, implementing best practices and efficiency measures.</p><br> <p>Provide guidance and support to junior procurement staff, mentoring them on procurement processes, supplier management, and negotiation tactics.</p><br> <p>Maintain accurate procurement records and documentation, ensuring compliance with organizational policies, procedures, and regulatory requirements.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Proficiency in procurement processes, including sourcing, bidding, and contract negotiation, to effectively manage procurement activities.</p><br> <p>Strong technical knowledge and understanding of engineering principles to assess technical specifications and ensure alignment with project requirements.</p><br> <p>Excellent analytical abilities to evaluate supplier proposals, conduct cost analysis, and identify opportunities for cost savings.</p><br> <p>Negotiation skills to secure favorable terms, pricing, and delivery schedules with suppliers while maintaining quality standards.</p><br> <p>Communication and interpersonal skills to collaborate with cross-functional teams, vendors, and stakeholders and effectively convey technical requirements and project objectives.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Purchasing Procedures L3<br>Materials Management L3<br>Material Forecasting L3<br>E-Procurement Tools L3<br>Agility<br>Purchasing Benchmarking L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering<br>Professional Qualification in Supply Chain/Logistics related course or any Related Technical Certificates<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Site Engineer (MEP) to join our team! In this role, you will oversee and coordinate MEP construction activities on major rail, tram, and infrastructure projects, ensuring works are executed safely, to the required quality, and in accordance with project schedules, designs, and specifications. You will work closely with construction management, design teams, contractors, and stakeholders to support successful project delivery.</p><p>What You ll Be Doing</p><ul><li>Monitoring and coordinating all contractors MEP activities on site.</li><li>Developing discipline-specific construction schedules and monitoring progress, providing schedule and progress appraisal reports to the Construction Manager.</li><li>Monitoring material procurement and deliveries to ensure timely support of construction activities and alignment with the construction schedule.</li><li>Ensuring that materials received meet project specifications and established quality standards.</li><li>Maintaining first-level quality assurance to confirm that the installation of all works within the MEP discipline is in accordance with plans, specifications, and industry standards.</li><li>Supervising MEP construction engineering work and providing technical support and guidance to construction and survey personnel.</li><li>Ensuring that all required tests and inspections are performed, witnessed, and documented in accordance with approved procedures.</li><li>Collaborating with construction management to identify and eliminate hazards that may adversely affect the environment, safety, or health of employees.</li><li>Ensuring that personnel within the assigned team follow safe work practices in compliance with site-specific safety procedures and industry standards.</li><li>Establishing and maintaining liaison with discipline design engineering staff and, where necessary, with third-party retail tenants and leaseholders across Doha Metro and Lusail Tram assets.</li><li>Reviewing and interpreting discipline design drawings and specifications to ensure current revision status and correct technical execution of the works.</li><li>Providing resolutions for technical engineering problems and coordinating the implementation of solutions on site.</li><li>Initiating and maintaining records, back-charge documentation, progress reports, and other project records as required.</li><li>Organizing and compiling data for final project turnover documentation and reports.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>BSc Degree in Mechanical Engineering or a construction-related field.</li><li>At least 10 years of post-graduate experience on major rail, tram, or infrastructure projects, preferably within the GCC.</li><li>Strong track record in managing and coordinating multidisciplinary site teams.</li><li>Solid understanding of MEP construction methods, standards, and quality requirements.</li><li>Demonstrated ability to multitask, effectively problem-solve, and manage multiple work fronts simultaneously.</li><li>Strong interpersonal and communication skills, with the ability to coordinate effectively with contractors, consultants, and stakeholders.</li><li>Must have valid MME registration in Qatar.</li></ul><p>Prior experience on Doha Metro, Lusail Tram, or similar rail/transit systems.</p><p>Familiarity with local authority requirements and standards for MEP installations in Qatar.</p><p>Experience with construction planning, progress tracking, and reporting tools.</p><p>Strong organizational skills and attention to detail in documentation and project close-out activities.</p><p></p></section>

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.