Heavy equipment mechanical engineer Jobs

<p>Liaise with the HSE Supervisor on safety related matters. Act as a safety leader. Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement. Assist functional supervisor in reviewing and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs. Supervise all EPIC contractor's Static &amp; Rotating equipment inspection &amp; installation activities are based on approved engineering documentation and project schedule during the execution of construction activities. Attend Requests for Inspections (RFIs) as per approved ITPs including Material Receiving Inspections in coordination with Lead Construction Supervisor and sign off relevant inspection and test reports / RFIs. Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification. Lead the construction contractor(s) on all mechanical aspects of the Static and Rotating Equipment installation works. Supervise with EPIC contractor during execution of the Static (including internals) and Rotating Equipment installation, FAT, alignment Inspection, Punch Clearing, pressure testing, pre-commissioning and Re-instatement at site. Manage and lead final mechanical completion inspections and punch closing. Supervisor the Pre-Com activities to ensure safety and the quality of the completed work. Lead the inspection activity with Vendor/Supplier at Site whenever required. Participate in PSSR and provide support to Operations pre &amp; start up activity where instructed. Co-ordinate mobilization of contractors on site. Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications. Good knowledge in reading and understanding P&amp;ID, GA, Associate structural drawings, Equipment Layout &amp; mechanical drawings and Manufacturer manual/Recommendations. Maintain a daily record of progress (daily diary) noting special comments. Reports to Snr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Participate in development of as-built drawings/documentation. Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing safety standards on the work site. Liaise and report with the QA/QC Inspector on quality related matters.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate Must possess a Degree or Diploma in Mechanical Engineering from an internationally recognized University. Preferably having formal training in QA/QC functional aspects. Candidate should have a minimum of 10 years overall experience in static and rotating equipment installation, including inspection coordination experience in the construction of midstream / downstream Oil &amp; Gas facilities. Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred. Current experience in State of Qatar industrial cities and/or other GCC countries is required. Extensive knowledge of international and industry specific codes &amp; standards, including ASME, ANSI, ISO, API, NFPA, SHELL DEP's, etc. Mechanical inspector certificates (API 510 &amp; API 653) would be an advantage. Extensive experience in coating systems and procedures, incl painting, galvanizing, wrapping, insulation, Refractory Lining etc. BGAS / API certification would be an advantage. Extensive experience in Static and Rotating Equipment Installation, FAT, Alignment, Inspection, punch list clearing, pressure testing, pre-commissioning and mechanical completion inspections, etc. Tie-in to live facilities, including testing and integration to existing systems, Stage Inspection and Testing of Construction activities as per approved ITPs</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Additional Qualifications:</strong></p><ul><li><strong>Safety Observation</strong><br>Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong><br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong><br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong><br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong><br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong><br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong><br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong><br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong><br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong><br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong><br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong><br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong><br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong><br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong><br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong><br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong><br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>The job requires Male applicants.</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor<br><br>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation</p><p>Raise SO in CMMS when found during shift.</p><p>Security Rounds:</p><p>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:</p><p>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response</p><p>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System</p><p>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO</p><p>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:</p><p>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:</p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:</p><p>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:</p><p>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis</p><p>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:</p><p>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization</p><p>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:</p><p>Respond to any alarms or alerts and take necessary corrective actions.</p><p>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management</p><p>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems</p><p>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras</p><p>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</p><p>Occasionally attend site visits by visitors or contractors.</p><p>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Mechanical Technician<br><br><b>Mechanical Technician</b>CTEC07 - Maintenance Technician<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><b>Responsibilities:</b><ul><li><p>Mechanical maintenance and Troubleshooting activities in the continuous operation plants.</p><br><br></li><li><p>Installation, removal and fixing back of Pumps &amp; Blowers, maintenance of all types of Valves, Vessels, Columns, Exchangers, Pipes, and other static equipment.</p><br><br></li><li><p>Carry out maintenance activity independently as necessary. Handling different type of tools used for maintenance activities and work in high elevation with adequate safety protective equipment.</p><br><br></li><li><p>Rotating equipment maintenance <span>activities.</span></p><br><br></li><li><p>Check work quality and take corrective action to rectify the detected faults through the work examination methods and standards.</p><br><br></li><li><p>Thorough understanding of the Isometrics, mechanicals drawings and <span>datasheets.</span></p><br><br></li><li><p>Cleaning, preserving &amp; maintaining the removed parts of the <span>equipment.</span></p><br><br></li><li><p>Good HSEQ record in his past <span>working.</span></p><br><br></li><li><p>Read, understand, and execute the jobs as per standard operating procedure/ work <span>instruction.</span></p><br><br></li></ul><br><b>Qualifications:</b><ul><li><p><span>TechnicalDiplomainrespectivetrade(12+3<span>years)</span></span></p><br><br></li><li><p><span>05yearsrelevantandhands-onexperienceinrespectivetrade,inOil&amp; Gas/Petrochemical/Fertilizer industry and competency</span></p><br><br></li></ul><br><span><b>Belong. Connect. Grow. with KBR! </b></span><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Mechanical Technician<br><br><b>Mechanical Technician</b>CTEC07 - Maintenance Technician<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><b>Responsibilities:</b><ul><li><p>Mechanical maintenance and Troubleshooting activities in the continuous operation plants.</p><br><br></li><li><p>Installation, removal and fixing back of Pumps &amp; Blowers, maintenance of all types of Valves, Vessels, Columns, Exchangers, Pipes, and other static equipment.</p><br><br></li><li><p>Carry out maintenance activity independently as necessary. Handling different type of tools used for maintenance activities and work in high elevation with adequate safety protective equipment.</p><br><br></li><li><p>Rotating equipment maintenance <span>activities.</span></p><br><br></li><li><p>Check work quality and take corrective action to rectify the detected faults through the work examination methods and standards.</p><br><br></li><li><p>Thorough understanding of the Isometrics, mechanicals drawings and <span>datasheets.</span></p><br><br></li><li><p>Cleaning, preserving &amp; maintaining the removed parts of the <span>equipment.</span></p><br><br></li><li><p>Good HSEQ record in his past <span>working.</span></p><br><br></li><li><p>Read, understand, and execute the jobs as per standard operating procedure/ work <span>instruction.</span></p><br><br></li></ul><br><b>Qualifications:</b><ul><li><p><span>TechnicalDiplomainrespectivetrade(12+3<span>years)</span></span></p><br><br></li><li><p><span>05yearsrelevantandhands-onexperienceinrespectivetrade,inOil&amp; Gas/Petrochemical/Fertilizer industry and competency</span></p><br><br></li></ul><br><span><b>Belong. Connect. Grow. with KBR! </b></span><br><br><br><br><br> </div>

General Information<br><br><strong>Ref #</strong> MRO_LAE_B2_L<br><br><strong>Location:</strong> Qatar-Doha<br><br><strong>Job family:</strong> Engineering<br><br><strong>Closing Date:</strong> 2026-10-31<br><br><strong>Description<br><br></strong><strong>About the role:<br><br></strong>We are currently recruiting for <strong>Licensed Aircraft Engineer</strong> <strong>(B2)</strong> under Light Maintenance – Technical Engineering in Doha.<br><br>As Licensed Aircraft Engineer Level, you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation.<br><br><strong>Specific Responsibilities Within The Role Includes<br><br></strong><strong>Operational <br><br></strong><ul><li>Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures.</li><li>Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective.</li><li>Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects.</li><li>Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures.</li><li>Provide satisfactory support to internal and external customers.</li><li>Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements.<br><br></li></ul><strong>Management &amp; Leadership<br><br></strong><ul><li>Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives.</li><li>Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position.</li><li>Establish the teams objectives and priorities to align with and support business objectives.</li><li>Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed.</li><li>Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,</li><li>Customer procedures and other publications. </li><li>Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities.</li><li>When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br><br></li></ul><strong>Be Part Of An Extraordinary Story<br><br></strong>Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br><br>Join us as we dare to achieve what’s never been done before.<br><br>Qualification<br><br><strong>About You<br><br></strong>To be successful in the role, you must have the following qualification and skills:<br><br><ul><li>Bachelor’s Degree or Equivalent with Minimum 4 years of job- related experience</li><li>Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B.Eng., BSc) or equivalent in aircraft engineering.</li><li>Holds a minimum 1 full Qatar Airways main fleet ICAO/QCAA, is must.</li><li>For Internal applicant: minimum of 1 year job related aircraft certifying experience as EN.01<br><br></li></ul><strong>Job Specific Skills<br><br></strong><ul><li>Sound knowledge of air legislation.</li><li>Determining the kind of tools and equipment needed to do a job.</li><li>Using mathematics to solve problems.</li><li>Controlling operations of equipment or systems.</li><li>Managerial skills – Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate’s skills. Ability to foster teamwork among team members.<br><br></li></ul><strong>About Qatar Airways Group<br><br></strong>Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.<br><br>Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.<br><br><strong>How To Apply<br><br></strong>If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.<br><br>https://aa115.taleo.net/careersection/QA_External_CS/jobapply.ftl?lang=en&amp;job=MRO_LAE_B2_L

The Journeyman Electrician performs organization, intermediate, direct support level electrical, maintenance/modification and repairs on military equipment as prescribed in the equipment Technical Manuals and U. S. Air Force standards<br><br>Key Responsibilities<br><br>Perform a variety of electrical trade functions such as the installation, maintenance or repair of equipment for the generation, distribution or utilization of electric energy. Assist team members in solving maintenance problems by analysis and troubleshooting. Maintains appropriate government required paperwork and the files (Job Packets) necessary for the maintenance and repair of the equipment. Test, repair, overhaul, modify and maintain electrical equipment of a specialized nature such as automatic alternator synchronizing equipment, amplifying control units, voltage regulating equipment, generators, switching and control panels and junction boxes. Working from blueprints, drawings, layouts or other specifications,Locating and diagnosing trouble in the electrical system or equipment,Working standard computations relating to load requirements of wiring or electrical equipment Using a variety of electrician's hand tools and measuring and testing instruments. Research and requisition materials and prepare necessary documents and reports. Maintain and repairs all aspects of buildings and industrial electrical distribution systems. Diagnose system malfunctions, isolate causes, and correct deficiencies. Dismantles and reassembles equipment, using Technical Manuals and/or Electronic Technical Manuals.<br><br>Education & Experience<br><br>High School Diploma or GED certificate with five (5) years of experience related to the maintenance, repair and testing of electrical systems. Journeymen level license for an Electrician. Must be able to read and interpret building diagrams and technical manuals. Must have experience with and knowledge of NEC and NFPA-40Familiarity with the British Electrical Code (BEC), desirable <br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa for host nation. Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<p>Job Purpose:</p> <p>Plan, organize and control the development of centralized governance for creating and maintaining the Material and Service Master through the implementation of appropriate process control to ensure technical data integrity as well as supervising technical evaluations, Materials Inspections and Materials Discrepancy Reports, Data Captures reviews, Digital Images taken of Materials.</p> <p>Minimum Qualification:</p> <ul> <li>Bachelor Degree in any relevant discipline or a high national diploma.</li> <li>Certificates in ERP SAP is an advantage.</li> </ul> <p>Minimum Experience:</p> <ul> <li>5 - 7 Years of experience in materials item identification, codification, standardization.</li> <li>Experience in inspection at Oil &amp; Gas Sector or Energy Sector.</li> <li>Knowledge of materials specifications and ability to interpret material test certificates.</li> </ul> <p>Job Specific Skills:</p> <ul> <li>Materials management and reporting systems.</li> <li>Extensive experience in dealing with vendors, suppliers and contractors in the Oil and Gas Sector.</li> <li>Computer literacy, good knowledge of Microsoft packages (Word, Excel, PowerPoint etc.), materials management and reporting systems software.</li> <li>Knowledge/Certificates of SAP is an advantage.</li> <li>Good written and oral English skills.</li> <li>Business acumen</li> <li>Knowledge of SAP</li> <li>Inventory / supply chain management.</li> <li>Communication skills</li> <li>Details orientation</li> <li>Commitment to Safety</li> <li>Communication, Innovation, Initiative, Driving results, Customer focus, Flexibility, Teamwork, Influence and People Development.</li> </ul> <p> </p> <p>Accountabilities:-</p> <p>Master Data Maintenance:</p> <ul> <li>Maintain centrally the Materials Master Database and associated views (Purchasing, MRP, Warehouse, Quality, Financial) in SAP for discipline related company materials after analysis and checking for possible duplicate availability.</li> <li>Optimally control the integrity of Material and Service Masters as the central source for all material specific data and ensure that the Material and Service Masters are at all times aligned with the standard unified cataloguing system by ensuring the correct item identification, codification, and qualitative data.</li> <li>Supervise and uphold technical data accuracy and standardize buying description and technical specifications for the procurement of materials and equipment.</li> <li>Monitor and control the appropriateness of stock / nonstock materials coding through conducting a due diligent Quality Assurance process to safeguard ORYX GTL assets and end users requirements.</li> <li>Oversee the adequacy of the master data maintenance to ensure that the integrity of materials used is in line with the internal customer s requirements.</li> <li>Take part in Vendor Evaluation system by monitoring the historical data of Quality Module.</li> <li>Ensure that the recommendations on proposed specifications during Procurement of Spares are carried out with due diligence to safeguard the maintainability of Oryx GTL assets.</li> </ul> <p>Supply Contracts:</p> <ul> <li>Perform Vendor based analyses with regards to commodities to determine potential Materials which can be realized through call off agreements or merging the duplicate items.<br>Supervise, all such technical evaluation, and management of all material related contracts.</li> </ul> <p>NDT equipment certifications:</p> <ul> <li>Ensure all related certifications on Oryx GTL s tools are valid as per Oryx GTL s standards in order to ensure the integrity and reliability of equipment.</li> </ul> <p>Material Classification:</p> <ul> <li>Develop and maintain material classification system by implementing the Material Classification per established standards to identify and eliminate commonalities and duplicates.<br>Service Master Maintenance</li> <li>Control the creation &amp; maintenance of the company s Service Master Data in ERP system (SAP) by ensuring integrity and standardized abbreviations and qualitative description.</li> </ul> <p>Valuation Classes:</p> <ul> <li>Supervise the maintenance of accurate Valuation Class in SAP, refurbishment, and serialization of data.</li> </ul> <p>Data Cleansing</p> <ul> <li>Validate item identification and codification of all materials (Mechanical, Electrical, and Instrumentation spares for Statutory and Non-Statutory equipment, Chemicals, Catalyst, generic maintenance spares and Consumables) registered in the SAP Materials Master Database.</li> <li>Administer, monitor, and support the Material Master Database (purchasing description, warehouse views, refurbishments, serialization, batch management, Quality, and financial views) through effective coordination with the assigned departmental focal points and Internal Customers to maintain the workflows.</li> <li>Flag specific items subject to shelf life in SAP as per user demand and/or manufacturer requirement.</li> <li>Is responsible for maintaining standard hierarchy for Materials/Services database in SAP for all company s Materials/Services after analysis and assessment of potential duplicates.</li> <li>Administer, monitor, and support Service Master Database maintenance workflows through effective coordination with owner of Service.</li> <li>Review Service Master for any duplications.</li> </ul> <p>Technical Evaluations:</p> <ul> <li>Supervise technical evaluations performed by Materials Integrity Controller.</li> </ul> <p>Material Discrepancy Reports (MDR):</p> <ul> <li>Supervise MDR review performed, and notifications created by. consolidating reviews of Vendors to establish Vendor Evaluation.</li> </ul> <p>Warehousing Support:</p> <ul> <li>Provide input and play proactive role in development and implementation of material preservation plan by ensuring items stored in the company s warehouses are preserved in accordance with manufacturer recommendations and/or company s procedures as well as ensuring that resources and material (spare parts) are readily available and properly maintained to mitigate the risk of operational interruption or delays.</li> </ul> <p>Quality Inspection and Standardization:</p> <ul> <li>Maintain high reliability of Quality of Materials via overseeing the conduct of material inspections and item identifications on goods received to ensure correctness and integrity of materials in a manner that safeguards ORYX GTL assets.</li> <li>Ensure standardization and classification of materials is performed on an on-going basis to rationalize inventory compliment.<br>Coordinate inspection hold points during RTS.</li> </ul> <p>Materials Systems (ERP):</p> <ul> <li><br></li></ul><ul> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p><strong>Rixos Premium Qetaifan Island North</strong></p><br><p>Rixos Premium Qetaifan Island North offers guests a luxurious breakaway to an island packed with entertainment and adventure. With five acres of fun-filled attractions, including a sensational waterpark, private beach, retail area, a beach club, and numerous fine dining and casual restaurants, Rixos Premium Qetaifan Island North is the ultimate multi-inclusive vacation destination.</p><br><br>Job Description<br><br><p><strong>Public Area Attendant</strong></p><br><p>The Public Area Attendant is responsible for maintaining the cleanliness and appearance of all public areas in the hotel, including lobbies, restrooms, hallways, elevators, and other guest and employee areas.</p><br><p><strong>What you will be doing:</strong></p><br><ul><li>Clean and sanitize all assigned public areas including restrooms, lobbies, hallways, elevators, stairwells, and back-of-house spaces.</li><li>Vacuum carpets, dust surfaces, polish furniture, and clean windows, mirrors, and glass doors.</li><li>Replenish supplies in public restrooms and ensure they are consistently clean and stocked.</li><li>Report maintenance issues or safety hazards to the supervisor promptly.</li><li>Empty trash and recycling bins in public and service areas.</li><li>Ensure cleanliness and presentation of entrances, guest areas, and exterior walkways.</li><li>Follow safety, security, and health procedures at all times.</li><li>Respond to guest requests courteously and promptly or refer them to the appropriate department.</li><li>Use cleaning chemicals and equipment safely and according to procedures.</li></ul><br>Qualifications<br><br><ul><li>Previous experience in housekeeping or a similar role.</li><li>Strong attention to detail and cleanliness.</li><li>Good communication and teamwork skills.</li><li>Ability to lift and carry heavy items, including linens and cleaning equipment.</li><li>Willingness to work flexible hours, including weekends and holidays.</li><li>Basic knowledge of housekeeping procedures and safety standards (preferred).</li></ul><br>Additional Information<br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b><span>Responsibilities</span></b><br></span><ul><li><p><span><b><span>Equipment Installation</span></b><span>: </span><span>Install, </span><span>assemble, </span><span>and </span><span>commission </span><span>mechanical, </span><span>electrical, </span><span>and </span><span>plumbing </span><span>systems </span><span>as </span><span>per </span><span>project </span><span>requirements.</span></span><br></p><br></li><li><p><span><b><span>Corrective Maintenance</span></b><span>: </span><span>Diagnose </span><span>faults </span><span>and </span><span>perform </span><span>repair </span><span>works </span><span>on </span><span>industrial </span><span>machinery, </span><span>electrical </span><span>panels, </span><span>and </span><span>piping </span><span>systems.</span></span><br></p><br></li><li><p><span><b><span>Preventive Maintenance</span></b><span>: </span><span>Carry </span><span>out </span><span>scheduled </span><span>servicing, </span><span>lubrication, </span><span>calibration, </span><span>and </span><span>inspections </span><span>to </span><span>minimize </span><span>downtime.</span></span><br></p><br></li><li><p><span><b><span>Workshop Practices</span></b><span>: </span><span>Perform </span><span>drilling, </span><span>threading, </span><span>tapping, </span><span>grinding, </span><span>welding, </span><span>and </span><span>fitting </span><span>tasks </span><span>with </span><span>precision.</span></span><br></p><br></li><li><p><span><b><span>Safety Compliance</span></b><span>: </span><span>Adhere </span><span>to </span><span>HSE </span><span>protocols, </span><span>permit‑to‑work </span><span>systems, </span><span>and </span><span>safe </span><span>handling </span><span>of </span><span>tools </span><span>and </span><span>equipment.</span></span><br></p><br></li><li><p><span><b><span>Documentation</span></b><span>: </span><span>Maintain </span><span>service </span><span>logs, </span><span>inspection </span><span>reports, </span><span>and </span><span>compliance </span><span>records.</span></span><br></p><br></li><li><p><span><span><b><span>Team Support</span></b>: Assist engineers and supervisors in site coordination, training junior staff, and ensuring smooth workflow.</span></span><br></p><br></li></ul><br><span>Requirements<b>Qualifications</b><br></span><ul><li><p><span>Diploma / ITI in Mechanical, Electrical, or relevant technical discipline.</span><br></p><br></li><li><p><span>Minimum <b>3–5 years of hands‑on experience</b> in industrial projects.</span><br></p><br></li></ul><b>Skills &amp; Competencies</b><br><ul><li><p><span>Strong knowledge of <b>mechanical, electrical, and plumbing systems</b>.</span><br></p><br></li><li><p><span>Proficiency in using hand tools, measuring instruments, and diagnostic equipment.</span><br></p><br></li><li><p><span>Ability to read technical drawings and follow work instructions.</span><br></p><br></li><li><p><span>Effective communication and teamwork skills.</span><br></p><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br>Planning and supervising all Project (Site) related activities including corrective and preventive maintenance of machines, tools and equipment, as well as providing technical support to maintain machinery related to construction operations such as scaffolding, excavation, cranes and tower cranes etc.<br><br><u><b>Job Responsibilities 1</b></u> <br>Planning and executing of preventive maintenance of all vehicles and heavy equipment's.Maintaining the records of all maintenance.Monitoring the maintenance in all sites for all machines at regular intervals.Follow-up and coordinates with our site supervisors for all site breakdowns<br><br><u><b>Job Responsibilities 2</b></u> <br>NOTABLE WORKING CONDITIONS : Physical ability to lift and carry items , climb and work from ladders if required, bend, stoop and work around wood dust and fumes and in inclement weather.<br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br></span><p>• Knowledge of business and management principles involved in planning, resource allocation and coordination of people and resources</p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br>4 years,2 years,1 years<br><br><u><b>Competencies</b></u> <br>Resilience<br>Agility<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br><br><br> </div>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred). Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</p><p>Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>Manage and guide the contractor during engineering, review, comment and approve contractor's construction engineering documents in PDMS. Attend engineering workshops such as Constructability review, SIMOPS, Schedule Risk Analysis, 3D Model Reviews, HAZOP, Lifting Plan reviews and provide inputs to ensure that contractor conducts these workshops complying to Company requirements. Participate in all engineering workshops during FEED and EPIC. Ensure Contractor execute offshore installation in accordance with Company standards, specifications, and approved drawings. Monitor, control and report Contractor's performance, man-power deployment, plant and equipment's movements, construction slippages etc. Act as the construction Risk Management representative to identify Construction Risk events, the effects &amp; consequences, propose mitigation measures and take ownership to ensure mitigation measures have been implemented at site. Liaise with senior discipline engineers throughout all phases of the project for all construction related matters including inputs during the detailed engineering and procurement stages. Review contractors' construction plans, schedules, method statements, procedures including offshore logistics. Maintain a daily record of progress noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Monitor and control of Company work permits to ensure that contractor compliance with conditions fixed on consolidated work permits. Coordinate mobilization and demobilization of contractors, sub-contractors and vendors to offshore sites following the contract award. Interact and interface with other contractors, projects, departments regularly to identify and resolve all construction related matters especially liaison with Production and Maintenance departments. Support Company in development of new standards, specification, guidelines etc., and support enhancement of existing corporate documents.</p><p><strong>Desired Candidate Profile</strong></p><p>Sc. in an Engineering discipline from a recognized University or Diploma in Mechanical (or) Petroleum Engineering discipline or equivalent plus relevant courses in Safety, Quality Control and Construction. Candidate should have a minimum of 12 years overall experience in supervising offshore installation of EPIC projects such as Oil and Gas Production / wellhead platforms, Jacket structures, subsea installation such as Riser, J-Tube, pipelines, umbilical etc. including construction work and material inspection, review and approval of construction method statements, load-out activities. Computer literate. Good communication and writing skills. Candidate must have robust experience in FEED and EPIC projects with strong capability to review / approve contractor deliverables. Excellent command of English Language (oral and written) Excellent knowledge of industry engineering standards, quality control, safety and environmental awareness. Excellent ability to interpret and review method statements, inspection and test plans, construction schedules and drawings. Ability to highlight potential bottlenecks/problems and ability to suggest solutions. Ability to supervise a multi-national and multi-cultural contractor workforce.</p>

We are seeking experienced Rolling Stock Overhaul Technicians to perform overhaul, repair, inspection, and maintenance activities on rolling stock components including bogies, couplers, gangways, doors, HVAC systems, wheelsets, and other associated equipment. The successful candidates will ensure all overhaul work is completed safely, efficiently, and in accordance with approved maintenance procedures, railway standards, and HSE requirements while supporting the daily production plan and maintaining high standards of quality and reliability.<br>Qualifications & Experience Diploma, ITI, Trade Certificate, or equivalent qualification in Mechanical, Electrical, Railway Engineering, or a related technical discipline. Minimum 3 years of experience in rolling stock maintenance, overhaul, railway, metro, light rail, or a similar mechanical/electrical industrial environment. Experience in mechanical and electrical fault finding and component overhaul. Ability to read and interpret engineering drawings, technical manuals, and maintenance instructions. Experience using hand tools, power tools, measuring instruments, and workshop equipment. Ability to prepare accurate maintenance records and technical reports. Good understanding of Health, Safety & Environmental (HSE) requirements, including safe systems of work, PPE, manual handling, and COSHH. Basic computer skills and familiarity with maintenance documentation.<br>Preferred Knowledge of TACT, Equinox, or CORMAP maintenance systems. Experience working with OEM maintenance procedures and railway maintenance standards. Knowledge of Continuous Improvement and 5S principles.

We are seeking experienced Rolling Stock Overhaul Technicians to perform overhaul, repair, inspection, and maintenance activities on rolling stock components including bogies, couplers, gangways, doors, HVAC systems, wheelsets, and other associated equipment. The successful candidates will ensure all overhaul work is completed safely, efficiently, and in accordance with approved maintenance procedures, railway standards, and HSE requirements while supporting the daily production plan and maintaining high standards of quality and reliability.<br>Qualifications & Experience Diploma, ITI, Trade Certificate, or equivalent qualification in Mechanical, Electrical, Railway Engineering, or a related technical discipline. Minimum 3 years of experience in rolling stock maintenance, overhaul, railway, metro, light rail, or a similar mechanical/electrical industrial environment. Experience in mechanical and electrical fault finding and component overhaul. Ability to read and interpret engineering drawings, technical manuals, and maintenance instructions. Experience using hand tools, power tools, measuring instruments, and workshop equipment. Ability to prepare accurate maintenance records and technical reports. Good understanding of Health, Safety & Environmental (HSE) requirements, including safe systems of work, PPE, manual handling, and COSHH. Basic computer skills and familiarity with maintenance documentation.<br>Preferred Knowledge of TACT, Equinox, or CORMAP maintenance systems. Experience working with OEM maintenance procedures and railway maintenance standards. Knowledge of Continuous Improvement and 5S principles.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform QA/QC inspections for mechanical installation, fabrication, piping, structural, and equipment works.</p></li><li><p>Verify materials, dimensions, and workmanship against approved drawings, specifications, and Inspection &amp; Test Plans (ITPs).</p></li><li><p>Conduct inspections during installation, hydrotesting, pressure testing, alignment, and mechanical completion activities.</p></li><li><p>Witness and document inspection and testing activities.</p></li><li><p>Prepare inspection reports, punch lists, NCRs, and quality documentation.</p></li><li><p>Ensure compliance with project quality procedures, client specifications, and international standards.</p></li><li><p>Coordinate with construction teams, supervisors, and client inspectors for inspection activities.</p></li><li><p>Monitor corrective actions and verify closure of quality issues.</p></li><li><p>Maintain QA/QC records and support project documentation for handover.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Degree/Diploma/ITI in Mechanical Engineering or related discipline.</p></li><li><p>Minimum <strong>3 years of QA/QC Mechanical Inspection experience</strong> in Oil &amp; Gas projects.</p></li><li><p>Experience in piping, structural, pressure vessels, rotating/static equipment, or mechanical installation is preferred.</p></li><li><p>Good knowledge of ASME, API, ISO, and relevant international codes and standards.</p></li><li><p>Ability to read and interpret engineering drawings, P&amp;IDs, isometrics, and technical specifications.</p></li><li><p>Familiarity with Inspection Test Plans (ITPs), Method Statements, and QA/QC documentation.</p></li><li><p>CSWIP 3.1 / BGAS / API / NACE (added advantage)</p></li></ul><br><p>Contract - 4 months &amp; extendable</p><p></p></section>

<p>Mechanical Technician</p><ul><li><p>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.</p></li><li><p>Carry out maintenance and overhaul of gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</p></li><li><p>Diagnose equipment issues and perform corrective repairs.</p></li><li><p>Conduct dimensional inspections using precision measuring instruments.</p></li><li><p>Interpret engineering drawings and technical documentation.</p></li><li><p>Support reverse engineering and component refurbishment activities.</p></li><li><p>Prepare inspection reports and maintenance records.</p></li><li><p>Ensure compliance with quality, safety, and workshop standards.</p></li></ul><p>Machinist</p><ul><li><p>Operate conventional horizontal lathes, boring machines, and milling machines.</p></li><li><p>Machine, repair, and refurbish components for rotating equipment.</p></li><li><p>Perform precision machining in accordance with engineering drawings and specifications.</p></li><li><p>Conduct dimensional inspections and maintain machining tolerances.</p></li><li><p>Support reverse engineering of worn or damaged components.</p></li><li><p>Prepare machining and inspection reports.</p></li><li><p>Maintain workshop equipment and ensure safe working practices.</p></li><li><p>CNC operation and programming experience will be an added advantage.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</p></li><li><p>Minimum <strong>10 years of relevant experience</strong> in rotating equipment repair, maintenance, or precision machining.</p></li><li><p>Hands-on experience with <strong>gas turbines, steam turbines, turbo compressors, and reciprocating compressors</strong>.</p></li><li><p>Strong experience operating <strong>conventional horizontal lathes, boring machines, and milling machines</strong>.</p></li><li><p>Good understanding of mechanical fitting, overhaul, precision machining, and inspection techniques.</p></li><li><p>Ability to read and interpret engineering drawings and technical documentation.</p></li><li><p>Proficient in using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.</p></li><li><p>Knowledge of reverse engineering techniques; CAD software knowledge (AutoCAD, SolidWorks, Inventor, etc.) is an advantage.</p></li><li><p>Strong commitment to safety, quality, teamwork, and continuous improvement.</p></li><li><p>Good communication, analytical, and problem-solving skills.</p></li></ol>

<strong>Job Location:<br><br></strong>Banana Island Resort Doha By Anantara<br><br>Anantara Hotels &amp; Resorts is a global luxury hotel and resort brand rooted in Thai culture, with an intrinsic sense of authentic hospitality. Inspired by the Sanskrit word meaning ‘without end’, our spirit embodies freedom, movement, and harmony. We believe every journey should leave a lasting impression — for our guests and for our people.<br><br>Founded in 2001 in Thailand, we have since expanded across the world, welcoming guests in some of the world’s most captivating locales — from pristine beaches and private islands to ancient sites and vibrant metropolises. If you are driven by a passion for generosity, warmth and heartfelt hospitality, Anantara offers a career without limits.<br><br>The Marine Electrical Engineer is responsible for the installation, operation, maintenance, troubleshooting, and repair of electrical and electronic systems onboard vessels or within marine facilities. The role ensures that all electrical equipment operates safely, efficiently, and in compliance with maritime regulations and company standards.<br><br>Key Responsibilities<br><br><ul><li>Install, inspect, maintain, and repair marine electrical and electronic systems.</li><li>Perform preventive and corrective maintenance on electrical equipment, including generators, motors, switchboards, transformers, and distribution systems.</li><li>Troubleshoot electrical faults and implement effective solutions to minimize downtime.</li><li>Maintain and repair navigation, communication, automation, alarm, and monitoring systems.</li><li>Conduct testing, calibration, and commissioning of electrical equipment and control systems.</li><li>Read and interpret electrical drawings, wiring diagrams, and technical manuals.</li><li>Monitor the performance and reliability of onboard electrical systems.</li><li>Ensure compliance with international maritime regulations, classification society requirements, and company safety standards.</li><li>Coordinate with engineering, operations, and maintenance teams during repairs, dry dockings, and vessel upgrades.</li><li>Maintain accurate maintenance records, inspection reports, and equipment documentation.</li><li>Assist in planning maintenance schedules, spare parts inventory, and equipment procurement.</li><li>Supervise contractors and technicians during electrical installation and repair work when required.</li><li>Ensure adherence to Lockout/Tagout (LOTO), electrical safety procedures, and permit-to-work systems.</li><li>Respond to emergency breakdowns and support troubleshooting during vessel operations.<br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Bachelor's Degree or Diploma in Electrical Engineering, Marine Electrical Engineering, Marine Engineering, or a related discipline.</li><li>Professional certifications in marine electrical systems or electrical safety are an advantage.</li><li>Valid STCW certification (for onboard positions), if applicable.<br><br></li></ul><strong>Experience<br><br></strong><ul><li>Minimum 3–5 years of experience in marine electrical engineering, ship maintenance, offshore operations, or shipbuilding.</li><li>Experience working on commercial vessels, offshore support vessels, yachts, passenger ships, or marine facilities is preferred.</li><li>Experience with marine automation and control systems is an advantage.<br><br></li></ul>Not the right fit? Set up email alerts as new job postings become available that meet your interest!