Heavy equipment mechanical engineer Jobs

As the HVAC/ICWS Technician, you will be responsible for the operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning (HVAC), and Industrial Control & Water Systems (ICWS) supporting mission-critical facilities at Al Udeid Air Base. This role ensures reliable environmental control and water system operations in accordance with U. S. military standards, safety regulations, and host-nation requirements.<br><br>Essential Job Functions<br><br>HVAC Systems<br><br>Operate, inspect, maintain, and repair commercial and industrial HVAC systems, including chillers, AHUs, RTUs, split systems, and control systems Diagnose mechanical, electrical, and control-related HVAC faults and perform corrective maintenance Perform preventive maintenance (PM) in accordance with established schedules and technical manuals Monitor system performance and recommend improvements for efficiency and reliability<br><br>ICWS / Water Systems<br><br>Operate and maintain industrial control systems related to potable water, wastewater, and associated pumping and distribution systems Monitor SCADA/BMS interfaces and respond to alarms or system anomalies Conduct inspections, testing, and minor repairs on valves, pumps, sensors, and control components Support water system sampling, flushing, and compliance activities as required<br><br>General Duties<br><br>Maintain accurate maintenance logs, reports, and work orders Comply with all safety, environmental, and force protection requirements Coordinate with engineers, supervisors, and base personnel to support mission needs Respond to emergency calls and perform after-hours or on-call support as required Ensure tools, equipment, and work areas are maintained in safe working condition<br><br>Education & Experience<br><br>High school diploma or equivalent A minimum of five (5) years of experience in maintaining and repairing commercial/industrial HVAC/R systems and Industrial Chilled Water Systems (ICWS) EPA Universal Certification required<br><br>Knowledge & Skills<br><br>Working knowledge of industrial control systems and water system operations Ability to read and interpret technical drawings, schematics, and control diagrams Strong troubleshooting and problem-solving skills<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<ul><li>Diagnose and repair complex electro-mechanical systems, troubleshooting issues ranging from electrical faults to mechanical wear.</li><li>Perform routine preventative maintenance on machinery and equipment to minimize downtime and ensure optimal performance.</li><li>Install, calibrate, and test new electro-mechanical equipment, ensuring it meets all specifications and operational requirements.</li><li>Interpret blueprints, schematics, and technical manuals to understand system designs and repair procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possession of a relevant Associate's degree or technical certification in Electro-Mechanical Technology or a related field.</li><li>A minimum of 3-5 years of hands-on experience troubleshooting and repairing electro-mechanical systems in an industrial setting.</li><li>Proficiency in reading and interpreting complex electrical schematics, mechanical blueprints, and P&IDs.</li><li>Skilled in the use of diagnostic tools such as multimeters, oscilloscopes, and PLC programming software.</li></ul>

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

Primary Purpose Of The Job<br><br>Perform duties as an integral part of a team responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Participate in drills and exercises within the community developing competencies as individual and as a team to the benefit of the community and within a safe working environment.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer Course. Qualified First Aider to first responder (CPR with AED) level Minimum five years as a Fire-Fighter in a commercial or industrial Fire-Fighter environment, civil defence force, or military fire service or successful completion of QP FPP programme (Qatari Nationals) Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly absorb information on arrival at an incident in conditions which may be dangerous and confusing and accordingly follow instructions. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate English Language (QP L3) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p><ul ><li >Candidates must have at least Vocational Diploma / Short Course Certificate</li><li >The job requires Male applicants.</li><li >Minimum of 5 years working experience is required for this position</li><li >Safety Observation<br>Raise SO in CMMS when found during shift.</li><li >Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li >Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li >Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li >PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li >Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li >Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li >Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li >System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li >System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li >Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li >Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li >Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li >Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li >Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li >Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li >Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Overview:</u></b></p><br><br><p>A technical service and application engineer role providing on-site support to customers and partnering with sales staff to deliver solution-driven water treatment services in downstream (petrochemical) facilities.&nbsp;</p><br><br><br><p><b><u>Key Responsibilities:</u></b></p><br><br><p><span>Petrochemical experience is mentioned in the requirements</span></p><br><br><p>Collaborate with District Sales Representatives to launch and support new chemical treatment applications.</p><br><br><p>Perform routine and technical service tasks: system audits, sample testing, data logging, reporting, and inventory management.</p><br><br><p>Install, calibrate, and maintain feed and monitoring equipment.</p><br><br><p>Troubleshoot operational issues, recommend corrective actions, and escalate complex challenges.</p><br><br><p>Build strong working relationships with customer personnel and support best practices implementation.</p><br><br><p>Capture service reports, assist with chemical ordering, and support technical proposals.&nbsp;</p><br><br><br><p><b><u>Qualifications:</u></b></p><br><br><p>Bachelor’s degree in chemical engineering.</p><br><br><p>1–3 years’ experience in water treatment.</p><br><br><p>Valid driver’s license and acceptable driving record.</p><br><br><p>Familiarity with chemical feed systems, monitoring equipment, and basic process instrumentation.&nbsp;</p><br><br><p>Knowledge in Microsoft Office, and strong communication and relationship skills.&nbsp;</p><br><br><br><p><b>Our Commitment to a Culture of Inclusion &amp; Belonging</b><br>Ecolab is committed to fair and equal treatment of associates and applicants and furthering the principles of Equal Opportunity to Employment. We will recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance in all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement. Ecolab will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin,citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, or disability.</p><br><br><br> </div>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards.</p><p>Your role</p><ul><li>Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems</li><li>Perform preventive and corrective maintenance as per schedules.</li><li>Diagnose system faults and troubleshoot mechanical, electrical, and control issues.</li><li>Read and interpret drawings, schematics, and technical manuals.</li><li>Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly.</li><li>Monitor system performance and recommend improvements for efficiency.</li><li>Ensure compliance with HSE standards, local codes, and project quality requirements.</li><li>Maintain service reports, maintenance logs, and records.</li><li>Coordinate with supervisors, engineers, and other trades as required.</li><li>Respond to emergency breakdowns when required.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>About you</h2><h3>Qualifications &amp; Experience</h3><ul><li>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent.</li><li>Minimum 3 7 years of hands-on HVAC experience (project/facilities-based).</li><li>Strong knowledge of HVAC mechanical, electrical, and control systems.</li><li>Experience in GCC/UAE projects preferred.</li><li>Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</li></ul><h3>Skills &amp; Competencies</h3><ul><li>HVAC installation, testing &amp; commissioning.</li><li>Preventive &amp; breakdown maintenance.</li><li>Fault diagnosis &amp; troubleshooting.</li><li>Knowledge of refrigerants and handling procedures.</li><li>Ability to work from drawings and method statements.</li><li>Basic electrical &amp; control panel knowledge.</li><li>Good communication and teamwork skills.</li></ul>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>Safety Observation</p><p><br></p><p>·Raise SO in CMMS when found during shift.</p><p>Security Rounds:</p><p><br></p><p>·&nbsp; &nbsp;Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:</p><p><br></p><p>·&nbsp; &nbsp; Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>·&nbsp; &nbsp; Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response</p><p><br></p><p>·&nbsp; &nbsp; Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System</p><p><br></p><p>·&nbsp; &nbsp; Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO</p><p><br></p><p>·&nbsp; &nbsp; Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:</p><p><br></p><p>·&nbsp; &nbsp; &nbsp;Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>·&nbsp; &nbsp; &nbsp;Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:</p><p><br></p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:</p><p><br></p><p>·&nbsp; &nbsp; Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:</p><p><br></p><p>·&nbsp; &nbsp; If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis</p><p><br></p><p>·&nbsp; &nbsp; Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:</p><p><br></p><p>·&nbsp; &nbsp; Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>·&nbsp; &nbsp; Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization</p><p><br></p><p>·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:</p><p><br></p><p>·&nbsp; &nbsp; &nbsp;Respond to any alarms or alerts and take necessary corrective actions.</p><p>·&nbsp; &nbsp; &nbsp;Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>·&nbsp; &nbsp; &nbsp;Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management</p><p><br></p><p>·&nbsp; Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems</p><p><br></p><p>·&nbsp; &nbsp; Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, assists in performing preventive and corrective maintenance on logging and perforating surface and downhole equipment. Requires knowledge of surface, open and cased hole tools, and lab testing equipment. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills typically acquire through a minimum of 2 years as an Associate Technician-Logging and Perforating or equivalent experience in electronics and successful completion of the Ft Worth electronic maintenance school. Trains directly under Principal or Senior Technician to gain knowledge and experience in maintaining logging equipment and tools.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<p><b>Qualifications:</b></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p><b>Additional Qualifications:</b></p><p>· Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.&nbsp; &nbsp; &nbsp; Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2.&nbsp; &nbsp; &nbsp; Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.&nbsp; &nbsp; &nbsp; Air Compressor</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4.&nbsp; &nbsp; &nbsp; AHU fans and blower</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;5.&nbsp; &nbsp; &nbsp; Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;6.&nbsp; &nbsp; &nbsp; Mechanical forklift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;7.&nbsp; &nbsp; &nbsp; Mechanical manlift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;8.&nbsp; &nbsp; &nbsp; Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</li><li>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>3. Air Compressor</li><li>4. AHU fans and blower</li><li>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>6. Mechanical forklift</li><li>7. Mechanical manlift</li><li>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li><li>Supervise, guide, and monitor work done by external vendors.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours as part of business continuity.</li><li>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</li><li>Where applicable, aid and support to other team members within and across the discipline, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li></ul>

<strong>Mott MacDonald</strong> is a global engineering, management, and development consultancy committed to delivering impactful work that shapes the future.<br><br>We are a team of over 20,000 experts working across the world in more than 50 countries.<br><br>We are proud to be part of an ever-changing global industry, delivering transformative work that’s defining our future. It’s our people who power that performance. As an employee-owned business, we invest in creating a space for everyone to feel safe and valued and empowered with the right tools and support.<br><br>Whether you want to pursue excellence in your specialism or broaden your experience with flexible roles across our business, you’ll be connected to a community of global experts championing you to be your best. Join us and shape your story with Mott MacDonald, where everyone has the opportunity to be <strong>brilliant</strong>.<br><br><strong>About the Role:<br></strong>Mott MacDonald is looking for a <strong>Electrical Inspector</strong> to monitoring and inspecting the electrical works on pumping station and sewage treatment plant projects.<br><br><strong>Key responsibilities and duties</strong> are listed, but not limited to, the below:<br><ul><li>Monitoring and inspecting the electrical works and ensuring compliance with the PPPA, stipulated standards, compliance with QCS and best international standards.</li><li>Attend progress and technical meetings with the Authority and the Project Company.</li><li>Checking electrical equipment and works executed by the Project Company and also assist in the review of the As-built drawings, and for conducting material inspection and site acceptance tests etc. </li><li>Respond to and attend Inspection Requests submitted by the contractor and recommend/take appropriate action where necessary.</li><li>Conduct site inspections when required by the Resident Engineer (RE) and Assistant Resident Engineer (ARE)</li><li>Review submitted shop drawings against contract drawings and specifications; ensure local codes and statutory requirements are adhered to and international best practice is adopted</li><li>Monitor work and assess the HSE and environmental issues, ensuring compliance with contractual specifications and HSE and risk assessments</li><li>Apply and implement quality assurance and quality control procedures for the site</li><li>Maintain reports for all site activities including progress reports, ensuring are readily available for inspection</li><li>Ensure effective co-ordination between various disciplines</li><li>Provide technical assistance to resolve any electrical issues that may arise<br><br></li></ul><strong>Candidate Specification:<br></strong><ul><li>Bachelor’s Degree in Electrical Engineering from an accredited Institution to the approval of the Engineer</li><li>Experience of supervision of electrical works related to similar size pump station and sewage treatment plant projects</li><li>Good knowledge of local materials standards</li><li>Safeguard - To operate ethically and with integrity, while prioritizing safety and security in all that you do</li><li>Know how to prioritize, advocate focus and accountability</li><li>Use clear and frequent communications, drive execution and results.</li><li>Excellent communication skills, both written and oral.<br><br></li></ul><strong>Your benefits </strong><strong>and rewards<br></strong>Our benefits vary by country and are subject to eligibility and local policy:<br><ul><li>Rewards and bonuses: we are owned by our people (no external investors) and through our employee ownership model success is shared through annual bonus opportunities and longer-term participation as your career grows (subject to local plan, eligibility and business performance)</li><li>Medical insurance and life insurance as per local plan (standard and enhanced coverage may vary by country and policy).</li><li>Annual leave in line with local policy (competitive within the market).</li><li>Maternity leave above and beyond local provisions and paternity leave provisions where applicable</li><li>Professional membership/ institution subscription support</li><li>Learning and career development through project variety, technical networks and structured development opportunities.</li><li>An inclusive culture: we’re committed to equality, diversity and inclusion, and creating a workplace where everyone feels valued and supported.<br><br></li></ul>Location(s):<br><br>Al Wakrah, QA<br><br>Contract Type: Permanent<br><br>Work Pattern: Full Time<br><br>Market: Water<br><br>Discipline: Electrical<br><br>Job Ref: 17533<br><br>Recruiter Contact: Yogesh Gosavi

We are looking for an experienced Industrial Hygiene Engineer to lead workplace exposure assessments and industrial hygiene risk management activities for a major Oil &amp; Gas operation. The role will involve both office-based and offshore activities, including visits to production platforms, storage and offloading vessels, drilling rigs and accommodation facilities.<br><br>Position title: Industrial Hygiene Engineer<br>Location: Doha, Qatar<br>Industry: Oil &amp; Gas<br><br>Key Responsibilities<br>Lead and manage Control of Substances Hazardous to Health (COSHH) activities.<br>Plan and execute workplace exposure assessments for chemical, physical, biological and ergonomic hazards.<br>Evaluate the control of hazardous substances and recommend improvements to existing control measures.<br>Conduct hazardous substance monitoring surveys, including BTEX and H2S.<br>Review and update Industrial Hygiene Risk Assessment Files (IHRAF) using qualitative and quantitative monitoring techniques.<br>Conduct noise surveys, noise dosimetry and heat stress prevention assessments.<br>Perform Indoor Air Quality (IAQ) assessments for office and accommodation facilities.<br>Lead vibration risk assessments and recommend appropriate control measures.<br>Develop and deliver awareness campaigns related to hazardous substances and industrial hygiene.<br>Provide guidance and training to Associate/Developing Industrial Hygiene Engineers.<br>Liaise with relevant departments to support the overall Industrial Hygiene risk management strategy.<br>Prepare high-quality technical reports and recommendations based on assessment findings.<br><br>Minimum Requirements<br>Certified Industrial Hygienist (CIH), Engineering Degree or Bachelor's Degree in Science.<br>Minimum 6 years of experience in industrial hygiene risk assessment and management, preferably within the Oil &amp; Gas industry.<br>Good knowledge of industrial hygiene standards and offshore operations.<br>Experience using Photoionization Detectors (PID) and/or gas chromatograph monitoring equipment.<br>Good understanding of gas detection methods, detector limitations and sensor poisoning.<br>Familiarity with Class 1 sound level meters and WBGT meters.<br>Excellent written and spoken English with strong report-writing skills.<br>Strong organisational, communication and interpersonal skills.<br>Ability to work independently and manage offshore activities effectively.<br>Must be fit to work in an offshore environment and high-temperature conditions.<br><br>Interested candidates with relevant Industrial Hygiene and Oil &amp; Gas experience are invited to apply.<br><br><br><strong>People&nbsp;</strong>are our business<strong>&nbsp;worldwide<br></strong>&nbsp;<br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions &amp; Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering &amp; Technical, Office &amp; Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil &amp; Gas, Life Science, Power &amp; Utilities, Constructions &amp; Infrastructure, Manufacturing and Renewables.<br><br><br><br>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The General Foreman is responsible to oversee daily site operations, coordinate with subcontractors and workers, and ensure projects are completed safely, efficiently, and according to specifications. They play a pivotal role in maintaining productivity, enforcing safety protocols, and fostering a collaborative work environment to achieve project goals. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Maintain acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br> <p>Monitor and control the latest valid drawings issued for use.</p><br> <p>Coordinate at various levels to carry out activities as built for major elements of work.</p><br> <p>Perform necessary corrective actions on work requiring rework or remedial actions as instructed and directed by the site engineer.</p><br> <p>Ensure that works are achieved based on the approved Shop Drawings, method statement, and Behavior-Based Safety (BBS) and 100% completed on or before the scheduled date of accomplishment.</p><br> <p>Complete site supervision of work, labor, materials, equipment-movement and proper distribution of such resource to ensure project costs and budgets are adhered to.</p><br> <p>Ensure daily accomplish the site supervision of operational related activities and ensure that the cost of the activities will not exceed.</p><br> <p>Maintains acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br> <p>Ensure accomplishing assigned works on the time frame allotted maintaining the quality according to Company standards and reduce the reworks percentage to 0%.</p><br> <p>Ensure compliance with the safety – Procedures and report if found any risk to the site Engineer to help project team to maintain zero Loss Time Incidents (LTIs).</p><br> <p>Ensure that 100% of workers under the supervision are in compliance with the Company’s safety procedures during work hours on a daily basis.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge in Project construction scope and objectives.</p><br> <p>Knowledge in project safety programs and objectives.</p><br> <p>Knowledge in Company and project safety programs and objectives.</p><br> <p>Knowledge in Occupational health and safety and environmental policies and procedures. </p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Project Management L2<br>Cost Management L2<br>QA/QC L2<br>Design &amp; Construction L2<br>HSE L2<br><br><br><u><b>Education</b></u> <br>High School Diploma in any Related Technical Certificates<br><br><br><br> </div>

<p>We are seeking a skilled and motivated Testing &amp; Commissioning Engineer - Substation Automation Systems (SAS) to support project execution and customer service activities across Qatar. The successful candidate will be responsible for the engineering, configuration, testing, commissioning, troubleshooting, and maintenance of substation control, automation, and monitoring systems, ensuring reliable and efficient operation in accordance with project and customer requirements.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Configure, test, and commission Siemens SICAM PAS and SICAM A8000 automation platforms.</li><li>Perform HMI and SCADA engineering, parameterization, configuration, and WinCC scripting activities.</li><li>Integrate and commission Bay Control Units (BCUs), protection relays, Remote Terminal Units (RTUs), energy meters, and multi-vendor Intelligent Electronic Devices (IEDs).</li><li>Engineer, configure, and troubleshoot communication protocols including IEC 61850, Modbus, and IEC 60870-5-104.</li><li>Execute Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), point-to-point verification, functional testing, interlocking checks, redundancy validation, and end-to-end system testing.</li><li>Configure and troubleshoot industrial communication networks, including managed switches, firewalls, VLANs, routing, and secure remote access solutions.</li><li>Implement and verify industrial cybersecurity measures and system hardening requirements in compliance with project specifications and industry standards.</li><li>Prepare engineering documentation, including point lists, test procedures, commissioning reports, network diagrams, and as-built documents.</li><li>Ensure compliance with Siemens Environmental, Health &amp; Safety (EHS) guidelines and customer-specific technical requirements.</li><li>Support planned shutdowns, energization activities, emergency service interventions, and commissioning works across customer sites throughout Qatar.</li><li>Collaborate effectively with project teams, customers, and stakeholders while contributing to technical knowledge sharing and continuous improvement initiatives.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering, Electronics Engineering, Communication Engineering, Control Systems Engineering, or a related discipline.</li><li>Minimum of 4 years of hands-on experience in Substation Automation Systems (SAS), SCADA, or protection and control system commissioning.</li><li>Proven experience with Siemens SICAM PAS, SICAM A8000, and WinCC platforms.</li><li>Strong technical knowledge of IEC 61850, Modbus, and IEC 60870-5-104 communication protocols.</li><li>Experience in the integration and commissioning of protection relays, IEDs, RTUs, and automation equipment from multiple vendors.</li><li>Sound understanding of industrial networks, OT infrastructure, and cybersecurity concepts.</li><li>Knowledge of SIMARIS Control will be considered an advantage.</li><li>Strong analytical, troubleshooting, technical reporting, and customer communication skills.</li><li>Excellent command of written and spoken English.</li><li>Previous GCC experience is preferred.</li><li>Relevant certifications in SAS, SCADA, networking, or cybersecurity are considered advantageous.</li><li>Valid Qatar driving license, or eligibility to obtain one, is preferred.</li></ul><p>Additional Requirements</p><ul><li>Willingness to travel and work at substations, control centers, industrial facilities, and customer sites across Qatar.</li><li>Ability to work during planned shutdowns, extended commissioning activities, and emergency support situations when required.</li><li>Commitment to maintaining the highest standards of safety, quality, and customer satisfaction.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>We are seeking a highly analytical and experienced <strong>Optimization Engineer</strong> to join our offshore project team. In this role, you will be responsible for <strong>maximizing drilling efficiency, reducing operational costs, and minimizing Non-Productive Time (NPT)</strong> across our offshore drilling campaigns. By leveraging real-time data analytics, advanced drilling software, and automation technologies, </li> </ul><br><ul> <li><strong>Real-Time Data Analysis:</strong> Monitor and analyze real-time surface and downhole drilling data (e.g., MSE, torque and drag, vibration, hydraulics, ROP) to identify inefficiencies and structural constraints.</li> <li><strong>Parameter Optimization:</strong> Provide data-driven technical recommendations to the offshore rig team regarding optimal drilling parameters (e.g., Weight on Bit, RPM, flow rates) to enhance ROP and extend bit/BHA life.</li> <li><strong>Performance Benchmarking:</strong> Develop, track, and present <strong>Key Performance Indicators (KPIs)</strong> and technical reports to benchmark performance across different rigs and drilling campaigns.</li> <li><strong>NPT &amp; Risk Mitigation:</strong> Investigate and diagnose drilling anomalies or dysfunctions (e.g., stick-slip, pack-offs, lost circulation) to mitigate risks and eliminate NPT.</li> <li><strong>Digital &amp; Automation Integration:</strong> Partner with major service providers like Baker Hughes or Pason Systems to deploy digital twins, autonomous directional drilling, and automated mud management applications.</li> <li><strong>Cross-Functional Collaboration:</strong> Coordinate between subsurface geologists, reservoir engineers, and the offshore operations crew to align technical targets with optimal well engineering designs.</li> <li><strong>Lessons Learned:</strong> Author comprehensive "End of Well" reports and capture lessons learned to drive continuous engineering improvement in future offshore campaigns.</li> </ul><br><ul> <li><strong>Education:</strong> Bachelor's degree in <strong>Petroleum, Mechanical, or Chemical Engineering</strong> (or related technical discipline).</li> <li><strong>Experience:</strong> Minimum of <strong>5+ years of experience</strong> in offshore drilling operations or drilling optimization roles.</li> <li><strong>Technical Skills:</strong> Proficiency in industry-standard drilling engineering and simulation software (e.g., OpenWells, WellPlan, Compass, or platform analytics like Corva).</li> <li><strong>Domain Knowledge:</strong> Advanced understanding of drilling mechanics, bit design, hydraulics, drilling fluids (mud systems), and directional drilling principles.</li> <li><strong>Certifications:</strong> Valid BOSIET / HUET (Offshore Survival) certification and IWCF Well Control certification (preferred). </li> <li>Strong critical thinking and the ability to process high-velocity data under pressure.</li> <li>Excellent communication skills to effectively translate complex data insights into clear operational instructions for offshore rig crews.</li> <li>A collaborative mindset with a proactive approach to safety and environmental standards.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance </li> </ul></li> <li><strong>Location:</strong><ul> <li>Qatar</li> </ul></li> <li><strong>Duration:</strong><ul> <li>24 months (Renewable)</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>08 Hours / 5 Days</li> </ul></li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Overview of the role</b></p><p>We are currently looking to recruit a Linde Material Handling Equipment Technician to join our Domasco Commercial Vehicle Division in Qatar. The role is responsible for carrying out mechanical and electrical repairs, troubleshooting, diagnostics, servicing, and maintenance of Linde Material Handling Equipment, including diesel and electric forklifts, in line with dealer/distributor standards and within agreed timelines. The successful candidate will play a key role in ensuring equipment reliability, safety, customer satisfaction, and first-time repair quality.</p><p><br></p><p><b>What you will do</b></p><p>•&nbsp;&nbsp;Carry out mechanical and electrical repairs, troubleshooting, diagnostics, servicing, and maintenance on Linde Material Handling Equipment.</p><p>•&nbsp;&nbsp;Diagnose faults accurately and recommend effective repair solutions to ensure issues are resolved correctly the first time.</p><p>•&nbsp;&nbsp;Use Linde diagnostic software, special tools, workshop equipment, service manuals, technical bulletins, and service checklists effectively.</p><p>•&nbsp;&nbsp;Read and interpret workshop manuals, schematic drawings, electrical circuits, hydraulic diagrams, and service instructions.</p><p>•&nbsp;&nbsp;Perform service and repair activities in the workshop and at customer sites across Qatar when required.</p><p>•&nbsp;&nbsp;Prepare clear and accurate Field Service Reports after each job and obtain customer acknowledgement where applicable.</p><p>•&nbsp;&nbsp;Maintain high standards of workmanship, safety, housekeeping, and compliance with company procedures and manufacturer standards.</p><p>•&nbsp;&nbsp;Coordinate with the Service Manager, Supervisor, and team members to complete assigned jobs within standard repair times and support workshop productivity.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required skills to be successful</b></p><p>•&nbsp;&nbsp;Diploma or ITI qualification in Electrical, Mechanical, Automotive, or a related technical discipline.</p><p>•&nbsp;&nbsp;Minimum 2 to 3 years of relevant experience in servicing, maintaining, and repairing Linde Material Handling Equipment, preferably including diesel and electric forklifts.</p><p>•&nbsp;&nbsp;Strong knowledge of workshop service manuals, diagnostic software, technical bulletins, and manufacturer repair procedures.</p><p>•&nbsp;&nbsp;Experience working independently in field service and workshop environments.</p><p><br></p><p><b>About the team</b></p><p>You will be part of the Domasco Commercial Vehicle Division in Qatar, working with a dedicated service team focused on delivering reliable, high-quality aftersales support for Linde Material Handling Equipment. The team works collaboratively to maintain strong technical standards, ensure customer satisfaction, and support the performance and safety of equipment used across customer operations in Qatar.</p><p><br></p><p><b>What equips you for the role</b></p><p>•&nbsp;&nbsp;Valid Qatar driving licence is an advantage.</p><p>•&nbsp;&nbsp;A strong team player with a learning mindset, customer-focused approach, and commitment to safe working practices.</p><p>•&nbsp;&nbsp;Strong hands-on mechanical and electrical troubleshooting skills.</p><p>•&nbsp;&nbsp;Ability to independently service, repair, troubleshoot, and overhaul components of Linde Material Handling Equipment.</p><p>•&nbsp;&nbsp;Good understanding of electrical, hydraulic, and mechanical schematics.</p><p>•&nbsp;&nbsp;Ability to use Linde diagnostic tools, workshop service manuals, and special tools effectively.</p><p>•&nbsp;&nbsp;High attention to detail with a strong focus on safety, reliability, and first-time fix quality.</p><p>•&nbsp;&nbsp;Good communication skills in English and the ability to work well with customers, supervisors, and team members.</p><p>•&nbsp;&nbsp;Self-motivated, hardworking, reliable, and able to work under pressure to meet job completion timelines.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Site Inspector-Electrical <p><strong>Part 4. Job Content</strong></p><br> <p><strong>Role Objective: </strong>To provide electrical engineering support for the successful delivery of Design &amp; Build interior fit-out projects by reviewing electrical designs, supervising installation works, coordinating multidisciplinary interfaces, monitoring construction quality, and ensuring all electrical and ELV systems are designed, installed, tested and commissioned in accordance with project specifications, Company standards, requirements and applicable statutory regulations.</p><br> <p><strong>4.1 </strong><strong>Key Accountabilities</strong></p><br> <ul><li>Review electrical design drawings, single-line diagrams (SLDs), load calculations, lighting calculations, shop drawings, material submittals and method statements to ensure compliance with project specifications, Company requirements and applicable codes.</li><li>Supervise and inspect the installation of all electrical systems including power distribution, lighting systems, emergency lighting, small power, distribution boards, cable containment, wiring systems, earthing, lightning protection (where applicable) and associated electrical equipment.</li><li>Review and monitor the installation of ELV systems including structured cabling, data and voice networks, CCTV, access control, public address systems, intercom systems, IPTV, audio-visual systems, BMS interfaces and other low-current systems included within the project scope.</li><li>Coordinate electrical works with architectural, mechanical, fire protection and ICT disciplines to ensure proper integration and compliance with approved designs.</li><li>Review equipment selections and verify compliance with approved schedules, energy efficiency requirements and manufacturer recommendations.</li><li>Monitor construction progress, review inspection requests, identify technical issues, issue observations and non-conformance reports (NCRs), and verify corrective actions.</li><li>Witness testing and commissioning activities including insulation resistance tests, continuity tests, functional testing, emergency lighting testing, ELV system integration, power-on testing and final commissioning.</li><li>Review commissioning procedures, test reports, operation &amp; maintenance manuals and as-built documentation prior to project handover.</li><li>Participate in factory inspections, material inspections, mock-ups, site acceptance tests (SAT), integrated systems testing and final handover inspections.</li><li>Assist in reviewing contractor payment applications, variation proposals and claims related to electrical and ELV works.</li><li>Ensure all electrical and ELV installations comply with Qatar Construction Specifications (QCS), Qatar Civil Defense (QCD), Kahramaa regulations, IEC standards, NFPA requirements and other applicable international standards.</li><li>Maintain accurate project documentation including RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.<ol><li><strong>General Responsibilities in Quality, Environmental &amp; Occupational Health &amp; Safety Management Systems </strong><ol><li>Aware of the QHSE Management System.</li><li>Understand the importance of conformance to the QHSE Policy and procedures and to the requirements of QHSE management system.</li><li>Aware of the Customer Requirements (where relevant).</li><li>Aware of the Significant Environmental Aspects and Occupational Hazards / risk in this area of operation.</li><li>Understand the potential consequences of deviations from approved procedures, specifications and safety requirements.</li><li>Aware of current Objectives and Targets in this area and what is the current status.</li><li>Aware of mergency Preparedness &amp; Response.</li><li>Aware of Security Requirements, sexual exploitation and abuse or gender based violence.</li></ol></li></ol></li></ul> <p><strong>Part 5. Working Conditions &amp; Hazards</strong></p><br> <p><strong>CHOOSE ONE:</strong></p><br> <ul><li> Normal office facilities (own office with desk, access to telephone)</li><li> Some exposure to heat, cold, dirt, noise and rainy weather conditions; some time away from duty station, exposure to</li><li> outdoor conditions</li><li> Some exposure to severe disagreeable conditions noise moisture, dust, excessive temperature, considerable dirt.</li><li><strong>CHOOSE ONE:</strong></li><li> Very slight chance of accident or health hazard, usual office situation</li><li> Exposure to security threats and/or other injury could occur in the course of work. Minor accidents possible.</li><li> Job requires working with moving equipment that could inflict injuries; health hazards due to unsanitary conditions;</li><li> There is exposure to serious injuries through some hazardous circumstances involving handling of equipment; may cause </li><li> illness, incapacity and loss of time.</li><li> There is likelihood of frequent exposure to hazards or conditions may cause total disability or death. Requires constant use of</li></ul> <p> safety equipment.</p><br> <p><strong>Part 6. Job Requirement</strong></p><br> <p><strong>Educational Qualifications</strong></p><br> <ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Professional registration is preferred.</li><li>Certification in Testing &amp; Commissioning or Low Voltage Systems is an advantage.</li></ul> <p><strong>Experience</strong></p><br> <ul><li>Minimum 10 years of professional experience in electrical engineering, construction supervision or project management.</li><li>Minimum 5 years of experience in high-end commercial office fit-out projects.</li><li>Proven experience in Design &amp; Build projects.</li><li>Strong experience in electrical distribution systems, lighting, emergency power, ELV and ICT coordination.</li><li>Experience in testing and commissioning of electrical and low-current systems.</li><li>Experience in Qatar and familiarity with Qatar Construction Specifications (QCS), Kahramaa regulations, Qatar Civil Defense requirements and local authority approval procedures.</li></ul> <p><strong>Behavioral Competencies</strong></p><br> <p><strong>Technical Competencies</strong></p><br> <p>Leadership</p><br> <p>Communication Skills</p><br> <p>Planning and Organizing</p><br> <p>Analytical Thinking</p><br> <p>Problem Solving</p><br> <p>Attention to Detail</p><br> <p>Teamwork</p><br> <p>Decision Making</p><br> <p>Time Management</p><br> <p>Stakeholder Management</p><br> <p>Electrical Power Distribution</p><br> <p>Lighting Systems</p><br> <p>Emergency Lighting</p><br> <p>Small Power Systems</p><br> <p>Distribution Boards</p><br> <p>Cable Containment Systems</p><br> <p>Earthing &amp; Bonding</p><br> <p>Structured Cabling</p><br> <p>ICT Coordination</p><br> <p>CCTV Systems</p><br> <p>Access Control Systems</p><br> <p>Audio-Visual Systems</p><br> <p>Building Management System (BMS) Interfaces</p><br> <p>Fire Alarm System Coordination</p><br> <p>Shop Drawing Review</p><br> <p>Material Submittal Review</p><br> <p>Testing &amp; Commissioning</p><br> <p>QA/QC Procedures</p><br> <p>IEC Standards</p><br> <p>NFPA Standards</p><br> <p>Qatar Construction Specifications (QCS)</p><br> <p>Kahramaa Regulations</p><br> <p>AutoCAD</p><br> <p>Revit / BIM (preferred)</p><br> <p>Microsoft Office Suite</p><br> <br> <br> </div>