Heavy equipment mechanical engineer Jobs

<p>JOB PURPOSE / OBJECTIVE Overall responsibility to ensure Heat Ventilation and Air Conditioning (HVAC) and lighting systems are maintained and upgraded as required for Mesaieed.? Responsible to initiate and follow up on the necessary improvement HVAC and Lighting Projects.?? KEY ACCOUNTABILITIES Routine Duties Ensure Preventive Maintenance of all HVAC / Lighting equipment is performed and report issues to the superintendent Carry out all assessment of job plan including JSA, review and acknowledge drawings, understands recommendations, review spares. Implement routine and unplanned maintenance activities in compliance with Life Critical Procedures, Tenets of Operations, plant policies and procedures, Standard Maintenance Procedures (SMPs) and Job Safety Analyses (JSAs). Ensure that equipment maintenance / overhauling of specific equipment are in accordance with all relevant standard maintenance procedure, Original Equipment Manufacture (OEM) manual to facilitate maximum reliability, availability and safety of the equipment. Ensure that the spares parts used are maintained and available.? Coordinate with ERG, production, safety, technical departments from reliability, QA /QC point of view related to mechanical. Act as the Designated Site Representative (DSR) for applicable contractors to ensure the safety of the contractor on site. Takes initiative to identify and implement areas for improvement in HVAC & Lighting. Support emergency planned SD’s and TA related maintenance activities. Lead troubleshooting efforts and recommend solutions and efforts to identify and resolve the root cause of failures /incidents.? Review preventive / Corrective maintenance (PM/CM) checklists as required. Implement and complete follow up action items from Action tracker/ Reliability improvement team recommendations / QSAFE action items in timely manner. Identify spare parts requirements / material required for equipment overhauling / repairs. Use SAP functionality to plan and execute the scheduled jobs. Take part in Internal/External & field audits as assigned and to complete audit action items before due dates. Inspect incoming equipment spares / material in material warehouse by using of relevant technical document like OEM manual/drawing etc. Support project teams on reviewing HVAC and light projects designs / drawings.?? Act as DSR and/or Project Owner for these projects as required. Conduct daily toolbox meetings as required.? ? 4.2 KEY ACCOUNTABILITIES Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of Maintenance Department’s systems, policies, processes, and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/services. Share the safety aspects of the organization like safety alerts, circulars, policy changes and medical circulars. Adhere to and follow all company safety policies, procedures, and Tenets of Operation. Understand the concept of Proactive safety and take personal responsibility to eliminate at risk behaviours and conditions in order to positively contribute to overall goal of zero incidents. Understand the Q-Safe process and actively participates in accordance with expectations. Actively Participate toolbox meetings and MSCM meetings as required. Reporting Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Follow up metrics for employee safety performance and to achieve departmental KPI. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education Required: 2 years Diploma of relevant field. Preferred: Bachelor’s degree in Engineering or relevant Technical degree. Experience Required: 3-5 years of experience in HVAC. Preferred: Experience in Petrochemicals Industry Languages Required: English- proficient. Preferred?:Arabic- working knowledge WORKING RELATIONSHIPS Internal Production Department, Technical Department, Facilities Management, ERG, Projects, HSE Departments, Materials Department, Commercial Group External Vendors, Contractors, and Subcontractors</p>

<ol><li><p>Develop, review, and approve lifting plans, rigging studies, load calculations, crane selection, and lifting methodologies.</p></li><li><p>Coordinate and supervise routine, critical, and complex lifting operations.</p></li><li><p>Conduct lifting risk assessments, Job Safety Analyses (JSAs), and lifting studies.</p></li><li><p>Ensure compliance with QELNG requirements, statutory regulations, and applicable standards, including LOLER, BS 7121, and ASME B30.</p></li><li><p>Verify the certification, inspection, suitability, and safe use of cranes, lifting accessories, and rigging equipment.</p></li><li><p>Ensure crane operators, riggers, banksmen, and lifting supervisors are appropriately qualified, competent, and authorised.</p></li><li><p>Conduct pre-lift inspections, field audits, and compliance checks.</p></li><li><p>Coordinate lifting activities with Project Management, Engineering, HSE, QA/QC, site teams, subcontractors, and client representatives.</p></li><li><p>Maintain lifting documentation, equipment registers, inspection records, risk assessments, and lift plans.</p></li><li><p>Investigate lifting incidents and near misses, implement corrective actions, and promote a Zero Harm culture.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Degree or relevant qualification in Mechanical Engineering or a related engineering discipline.</p></li><li><p>Proven experience as a Lifting Appointed Person, Rigging Engineer, or in a similar lifting and rigging role within the Oil & Gas industry.</p></li><li><p>Experience in catalyst replacement, mechanical maintenance, shutdown, and turnaround projects is highly desirable.</p></li><li><p>Strong knowledge of lifting plans, crane operations, rigging arrangements, and critical lifting activities.</p></li><li><p>Familiarity with LOLER, BS 7121, ASME B30, and relevant client lifting requirements.</p></li><li><p>Valid and recognised Lifting Appointed Person certification, as required by the client.</p></li><li><p>Strong leadership, planning, coordination, and problem-solving skills.</p></li><li><p>Commitment to safety, quality, and operational excellence.</p></li></ol>

<p>* Witness contractors' scope of work and progress in accordance with project requirements.* Follow-up construction activities and progress during pre-shutdown and shutdown of the Brownfield WHPs &amp; RTs. * Oversee Brownfield offshore Pre-Commissioning &amp; Commissioning execution activities and ensure their safety and compliant.* Follow-up punch list creation, categorization and clearance via weekly meeting with Contractor. * Verify the completeness of CONTRACTOR's completion dossiers for mechanical completion, pre-commissioning, and commissioning through to handover to permanent asset.* Monitor and verify Contractor's preservation activities and ensure it meets project requirements. * Coordinate, capture, and share SC Lessons Learned (LL) for inclusion in the project lessons learned register.* Monitor progress and status of subsystems using the completion management system and ensure timely handovers. * Oversee and control all mechanical completion (MC), pre-commissioning (CSA), and commissioning documentation (RFSU).</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors Degree in Applied Sciences or Engineering 8 years experience with large-project commissioning in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Strong knowledge and understanding of Completion certificate types Strong decision making and prioritization skills under pressure technical, analytical, and interface skills. Strong knowledge and understanding of punch list categorization Experience using Completion Management Systems (CMS) data base such as PIMS, WinPCS, ICAPS, Hexagon or similar. Familiarity with construction, QA/QC, and Operations interfaces. Excellent organizational, reporting, and communication skills. Strong understanding of HSE standards and safe system handover practices. A strong commitment to safety protocols and procedures of offshore site environment. Effective coordination with all parties involved and reporting skills. Strong organizational and technical judgment skills Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities Excellent communication skills to read, write, and speak fluent English Have pre-commissioning, commissioning and start-up experience as a commissioning performer on major Oil &amp; Gas projects.</p>

<p>Witness contractors' scope of work and validate test and check sheets in accordance with project requirements. Follow-up construction activities and progress during pre-shutdown and shutdown of the Brownfield WHPs &amp; RTs. Oversee Brownfield offshore Pre-Commissioning &amp; Commissioning execution activities and ensure their safety and compliant. Follow-up punch list creation, categorization and clearance via weekly meeting with Contractor. Verify the completeness of CONTRACTOR's completion dossiers for mechanical completion, pre-commissioning, and commissioning through to handover to permanent asset. Monitor and verify Contractor's preservation activities and ensure it meets project requirements. Coordinate, capture, and share SC Lessons Learned (LL) for inclusion in the project lessons learned register. Monitor progress and status of subsystems using the completion management system and ensure timely handovers. Oversee and control all mechanical completion (MC), pre-commissioning (CSA), and commissioning documentation (RFSU).</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Bachelors Degree in Applied Sciences or Engineering 8 years experience with large-project commissioning in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Strong knowledge and understanding of Completion certificate types Strong decision making and prioritization skills under pressure technical, analytical, and interface skills. Strong knowledge and understanding of punch list categorization Experience using Completion Management Systems (CMS) data base such as PIMS, WinPCS, ICAPS, Hexagon or similar. Familiarity with construction, QA/QC, and Operations interfaces. Excellent organizational, reporting, and communication skills. Strong understanding of HSE standards and safe system handover practices. A strong commitment to safety protocols and procedures of offshore site environment. Effective coordination with all parties involved and reporting skills. Strong organizational and technical judgment skills Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities Excellent communication skills to read, write, and speak fluent English Have pre-commissioning, commissioning and start-up experience as a commissioning performer on major Oil &amp; Gas projects.</p>

<p>* Witness contractors' scope of work and validate test and check sheets in accordance with project requirements.* Follow-up construction activities and progress during pre-shutdown and shutdown of the Brownfield WHPs &amp; RTs. * Oversee Brownfield offshore Pre-Commissioning &amp; Commissioning execution activities and ensure their safety and compliant.* Follow-up punch list creation, categorization and clearance via weekly meeting with Contractor. * Verify the completeness of CONTRACTOR's completion dossiers for mechanical completion, pre-commissioning, and commissioning through to handover to permanent asset.* Monitor and verify Contractor's preservation activities and ensure it meets project requirements. * Coordinate, capture, and share SC Lessons Learned (LL) for inclusion in the project lessons learned register.* Monitor progress and status of subsystems using the completion management system and ensure timely handovers. * Oversee and control all mechanical completion (MC), pre-commissioning (CSA), and commissioning documentation (RFSU). * Have pre-commissioning, commissioning and start-up experience as a commissioning performer on major Oil &amp; Gas projects.</p><p><strong>Desired Candidate Profile</strong></p><p>* Bachelors Degree in Applied Sciences or Engineering* 8 years' experience with large-project commissioning in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. * Strong knowledge and understanding of Completion certificate types* Strong decision making and prioritization skills under pressure technical, analytical, and interface skills. * Strong knowledge and understanding of punch list categorization* Experience using Completion Management Systems (CMS) data base such as PIMS, WinPCS, ICAPS, Hexagon or similar. * Familiarity with construction, QA/QC, and Operations interfaces.* Excellent organizational, reporting, and communication skills. * Strong understanding of HSE standards and safe system handover practices.* A strong commitment to safety protocols and procedures of offshore site environment. * Effective coordination with all parties involved and reporting skills.* Strong organizational and technical judgment skills * Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities* Excellent communication skills to read, write, and speak fluent English</p>

<br><ul><li><p>Lead and manage Electrical Engineering projects from concept through detailed engineering and project execution.</p></li><li><p>Manage multidisciplinary engineering teams and coordinate with clients, vendors, and project stakeholders.</p></li><li><p>Plan, monitor, and control engineering deliverables, schedules, budgets, and quality.</p></li><li><p>Review and approve engineering documents, design calculations, specifications, and drawings.</p></li><li><p>Ensure compliance with client standards, IEC, IEEE, NFPA, QatarEnergy, Saudi Aramco, and international engineering standards.</p></li><li><p>Interface with procurement, construction, commissioning, and operations teams.</p></li><li><p>Lead technical discussions, design reviews, HAZOP, constructability reviews, and client meetings.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Technical Expertise</strong></p><p>Hands-on experience in:</p><ul><li><p>HV & LV Power Distribution Systems</p></li><li><p>Power System Studies (ETAP)</p></li><li><p>Load Flow, Short Circuit & Protection Coordination</p></li><li><p>Electrical System Design</p></li><li><p>Electrical Equipment Sizing & Selection</p></li><li><p>Substations & Switchgear</p></li><li><p>UPS, Battery Charger & DC Systems</p></li><li><p>Earthing & Lightning Protection</p></li><li><p>Hazardous Area Classification</p></li><li><p>Cable Engineering</p></li><li><p>Lighting & Small Power</p></li><li><p>Electrical Heat Tracing</p></li><li><p>Motor Control Centres (MCC)</p></li><li><p>Variable Frequency Drives (VFD)</p></li><li><p>Power Management Systems (PMS)</p></li><li><p>Emergency Power Systems</p></li><li><p>Electrical Design Calculations</p></li><li><p>Electrical Material Specifications</p></li><li><p>Vendor Document Reviews</p></li></ul><p><strong>Preferred Skills</strong></p><ul><li><p>Excellent leadership and communication skills.</p></li><li><p>Client-facing experience with major Oil & Gas operators.</p></li><li><p>Experience managing multidisciplinary engineering teams.</p></li><li><p>GCC experience preferred.</p></li><li><p>PMP certification is an added advantage.</p><br></li></ul><p><strong>Preferred Client Experience</strong></p><p>Candidates with experience executing FEED/detailed engineering projects for major Oil & Gas operators such as:</p><ul><li><p><strong>QatarEnergy (Former Qatar Petroleum)</strong></p></li><li><p>Saudi Aramco</p></li><li><p>ADNOC</p></li><li><p>PDO</p></li><li><p>Kuwait Oil Company (KOC)</p></li><li><p>Oman LNG</p></li><li><p>Qatargas / RasGas</p></li><li><p>Shell</p></li><li><p>ExxonMobil</p></li><li><p>TotalEnergies</p></li><li><p>Chevron</p></li><li><p>BP</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Kitchen Steward is responsible for maintaining high standards of cleanliness, hygiene, and sanitation across kitchen and back-of-house areas. The role supports smooth kitchen operations by ensuring utensils, equipment, and work areas are properly cleaned and sanitized while following food safety and chemical-handling procedures.<br><br></span><br><span>RequirementsMinimum <b>6 months</b> of Kitchen Stewarding experience, preferably in a 4 or 5 star hotel.<br><b>Valid Food Handling Certificate is mandatory.</b><br>Valid Qatar ID required.<br>Clean and sanitize kitchen equipment, utensils, crockery, cutlery, and work areas.<br>Maintain cleanliness of floors, walls, drains, storage, and dish washing areas.<br>Follow food safety, hygiene, sanitation, and health &amp; safety standards.<br>Handle and store cleaning chemicals safely according to procedures.<br>Segregate and dispose of kitchen waste correctly.<br>Ensure clean utensils and equipment are available for kitchen operations.<br>Knowledge of <b>chemical handling</b> and food safety practices.<br><b>Good grooming and personal hygiene.</b><br>Physically fit and capable of carrying heavy loads.<br>Ability to work shifts, weekends, and public holidays as required.<br></span><br> </div>

<p><strong>We're Hiring QA/QC Engineers - Mechanical</strong></p><p><br></p><p><strong>Location:</strong> Qatar</p><p><strong>Contract:</strong> 6 Months (Extendable to 1 Year)</p><p><strong>Availability:</strong> Immediate</p><p><br></p><p><strong>About the Role</strong> We are seeking an experienced Mechanical QA/QC Engineer for an initial 6-month contract in Qatar, extendable to 1 year. The candidate will oversee quality assurance and control for mechanical installations and equipment, with a strong focus on proactive identification and liquidation of all outstanding quality items to drive project closeout.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Conduct site inspections on mechanical works including piping, HVAC, equipment installation and</p><p> prepare detailed Site Inspection Reports</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Raise, track, and close out Non-Conformance Reports (NCRs)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Monitor compliance with project quality plans, specifications, and applicable codes/standards (ASME,</p><p> API, NFPA, etc.)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Manage and facilitate QCDD approval procedures and submissions for mechanical systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Develop, update, and maintain QA/QC dashboards for management reporting</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Identify all pending and outstanding quality items; assess actions required to close each item and</p><p> develop a structured liquidation plan to proactively resolve and clear them within defined timelines</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Witness and verify pressure testing, hydrostatic testing, and pre-commissioning activities</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Liaise with site teams, contractors, and consultants to ensure timely resolution of quality issues</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support internal and external audits and quality reviews</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Maintain accurate quality documentation and records</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Provide regular quality performance reports to project management</p><p><br></p><p><strong>Qualification &amp; Experience</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Bachelor’s Degree in Mechanical Engineering (mandatory)</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Minimum 8 years of QA/QC experience in mechanical works within construction/infrastructure projects</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Hands-on knowledge of QCDD approval procedures for mechanical systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Demonstrated experience in backlog identification, punch list management, and proactive closeout of</p><p> quality items</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Familiarity with ASME, API, ISO, and other relevant mechanical codes and standards</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ISO 9001 Lead Auditor certification preferred</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong knowledge of NCR management, site inspections, and quality dashboards</p><p><br></p><p><strong>Other Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Currently based in Qatar | Transferable visa | NOC from current employer</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Excellent reporting, documentation, and communication skills</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Immediate availability preferred</p><p><br></p>

<p>Senior Shops Technician Job Purpose We are looking for an experienced Senior Shops Technician to lead day-to-day workshop operations and support maintenance activities in a petrochemical/oil & gas environment. The role is responsible for supervising workshop technicians, carrying out Pressure Relief Valve (PRV) overhauling and testing, hydrostatic and pneumatic pressure testing, fabrication support, and ensuring all work is completed safely, efficiently, and in compliance with company and industry standards. Key Responsibilities Supervise and support workshop technicians and contractors to ensure safe, high-quality, and timely execution of work. Perform and oversee PRV overhauling, inspection, testing, calibration, and certification. Carry out hydrostatic and pneumatic pressure testing and maintain accurate testing documentation. Review work orders, engineering drawings, and Job Safety Analyses (JSA) before starting work. Ensure the correct use of spare parts, tools, testing equipment, and workshop resources. Maintain workshop equipment, lapping machines, testing devices, and ensure excellent housekeeping standards. Support fabrication, welding, piping, machine shop, tool crib, shutdown, turnaround, and emergency maintenance activities. Coordinate with Maintenance, Production, QA/QC, Engineering, and HSE teams to ensure efficient workshop operations. Participate in audits, prepare technical reports, update maintenance records, and use SAP PM to execute work orders. Promote a strong safety culture and identify opportunities for continuous improvement. Qualifications & Experience Diploma in Mechanical Engineering or a related discipline (Bachelor's degree preferred). Minimum 5–7 years of experience in petrochemical, oil & gas, or heavy industrial maintenance. Hands-on experience with PRV maintenance, pressure testing, fabrication, piping, and welding. Ability to read P&IDs and isometric drawings. Working knowledge of SAP PM and Permit-to-Work systems is an advantage. Strong leadership, troubleshooting, communication, and problem-solving skills. Welding certifications (ASME/API/BS) are preferred.</p><p>Senior Shops Technician (Valve Shop) Job Purpose We are looking for an experienced Senior Shops Technician to lead day-to-day workshop operations and support maintenance activities in a petrochemical/oil & gas environment. The role is responsible for supervising workshop technicians, carrying out Pressure Relief Valve (PRV) overhauling and testing, hydrostatic and pneumatic pressure testing, fabrication support, and ensuring all work is completed safely, efficiently, and in compliance with company and industry standards. Key Responsibilities Supervise and support workshop technicians and contractors to ensure safe, high-quality, and timely execution of work. Perform and oversee PRV overhauling, inspection, testing, calibration, and certification. Carry out hydrostatic and pneumatic pressure testing and maintain accurate testing documentation. Review work orders, engineering drawings, and Job Safety Analyses (JSA) before starting work. Ensure the correct use of spare parts, tools, testing equipment, and workshop resources. Maintain workshop equipment, lapping machines, testing devices, and ensure excellent housekeeping standards. Support fabrication, welding, piping, machine shop, tool crib, shutdown, turnaround, and emergency maintenance activities. Coordinate with Maintenance, Production, QA/QC, Engineering, and HSE teams to ensure efficient workshop operations. Participate in audits, prepare technical reports, update maintenance records, and use SAP PM to execute work orders. Promote a strong safety culture and identify opportunities for continuous improvement. Qualifications & Experience Diploma in Mechanical Engineering or a related discipline (Bachelor's degree preferred). Minimum 5–7 years of experience in petrochemical, oil & gas, or heavy industrial maintenance. Hands-on experience with PRV maintenance, pressure testing, fabrication, piping, and welding. Ability to read P&IDs and isometric drawings. Working knowledge of SAP PM and Permit-to-Work systems is an advantage. Strong leadership, troubleshooting, communication, and problem-solving skills. Welding certifications (ASME/API/BS) are preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Operates assigned vehicle in safe and courteous manner.</li> <li>Keeps the assigned vehicle clean inside and outside.</li> <li>Immediately reports any accident or incident to the management. &nbsp;</li> <li>Liaises with the Fleet Administrator and Fleet Technical to schedule major and minor periodic maintenance.</li> <li>Responsible for ensuring 100% loading of the dedicated stocks</li> <li>Ensures accurate and timely delivery of picked orders</li> <li>Jointly with the Delivery Assistant:</li> <li>Plans the efficient delivery sequence for the consigned load</li> <li>Ensures all supporting delivery documentations are accurately processed and handled.</li> <li>Ensures adherence to health &amp; safety procedures</li> <li>May be required to liaise with representatives from Sales Division &nbsp;</li> <li>May be required to liaise with the Document Controllers within Logistics</li> <li>Interfaces with Warehouse and Distribution staff</li> <li>On a daily basis acts as interface with the customer at the point of delivery</li> <li>Through positive interaction and responsiveness, ensures customer satisfaction</li> <li>Jointly with the Delivery Assistant, is responsible for the daily supervision of supply laborers &nbsp;</li> <li>Identifies needs and improvement opportunity for efficient and maximized cube fill utilization, trips and drops output and provides information to next level in order to facilitate change or improvement</li> <li>Mentor new drivers and delivery assistants whenever required.&nbsp;</li> </ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul> <li>Minimum 3 years driving experience of Medium Trucks with minimum 2 years driving experience of delivery experience for a FMCG company is a must.</li> <li>Must have a valid Qatar driving license; qualified in medium driving category. Having also heavy (Trailer) driving category is a plus.</li> <li>Vehicle basic maintenance and troubleshooting knowledge is a plus.</li> <li>At least High school level</li> <li>No health issues related to blood sugar, cholesterols, back pains health issues that will affect driving and the labor intensive part of the delivery.</li> <li>Can read, write, speak and understand basic Basic English.</li> <li>Can mentally calculate using basic arithmetic.</li> <li>Physically fit to lift and move heavy load (i.e. 20 kilos upstairs back and forth from 1st floor to second floor)</li> <li>Flexible in working either in morning or evening work shift.</li> <li>Willing to occasionally work on straight shifts.</li> <li>Willing to work on designated off days or holidays whenever deliveries are required.</li> <li>Willing to work outdoors in a very demanding environment. &nbsp;<br>&nbsp; &nbsp;&nbsp;</li> </ul></div>

Job Purpose<br><br>The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements.<br><br>Key Responsibilities<br><br>Supervise and coordinate all offshore instrument commissioning activities.<br><br>Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities.<br><br>Review and implement approved commissioning procedures, method statements, test packs, and project specifications.<br><br>Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning.<br><br>Coordinate Commissioning Activities For<br><br>DCS, ESD, PLC, and SCADA systems<br><br>Fire & Gas (F&G) systems<br><br>Control valves and shutdown valves<br><br>Pressure, temperature, flow, and level instruments<br><br>Analyzers and metering systems<br><br>Package equipment instrumentation<br><br>Lead Cause & Effect testing and functional verification.<br><br>Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors.<br><br>Conduct system walkdowns and coordinate punch-list clearance.<br><br>Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams.<br><br>Monitor daily progress and provide regular reports to the Commissioning Manager.<br><br>Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly.<br><br>Support offshore start-up and operational readiness activities.<br><br>Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements.<br><br>Conduct toolbox talks and pre-job safety meetings.<br><br>Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel.<br><br>Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule.<br><br>Minimum Qualifications<br><br>Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline.<br><br>Relevant technical certification in Instrumentation and Control Systems.<br><br>Valid offshore safety certification such as BOSIET/FOET.<br><br>Valid offshore medical fitness certificate.<br><br>H2S certification, where required by the project.<br><br>Experience Requirements<br><br>Minimum 10 years of experience in Instrumentation and Control Systems.<br><br>Minimum 5 years of experience in commissioning and start-up activities.<br><br>Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer.<br><br>Previous experience in offshore Oil & Gas projects is highly preferred.

Job Purpose<br><br>The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements.<br><br>Key Responsibilities<br><br>Supervise and coordinate all offshore instrument commissioning activities.<br><br>Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities.<br><br>Review and implement approved commissioning procedures, method statements, test packs, and project specifications.<br><br>Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning.<br><br>Coordinate Commissioning Activities For<br><br>DCS, ESD, PLC, and SCADA systems<br><br>Fire & Gas (F&G) systems<br><br>Control valves and shutdown valves<br><br>Pressure, temperature, flow, and level instruments<br><br>Analyzers and metering systems<br><br>Package equipment instrumentation<br><br>Lead Cause & Effect testing and functional verification.<br><br>Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors.<br><br>Conduct system walkdowns and coordinate punch-list clearance.<br><br>Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams.<br><br>Monitor daily progress and provide regular reports to the Commissioning Manager.<br><br>Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly.<br><br>Support offshore start-up and operational readiness activities.<br><br>Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements.<br><br>Conduct toolbox talks and pre-job safety meetings.<br><br>Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel.<br><br>Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule.<br><br>Minimum Qualifications<br><br>Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline.<br><br>Relevant technical certification in Instrumentation and Control Systems.<br><br>Valid offshore safety certification such as BOSIET/FOET.<br><br>Valid offshore medical fitness certificate.<br><br>H2S certification, where required by the project.<br><br>Experience Requirements<br><br>Minimum 10 years of experience in Instrumentation and Control Systems.<br><br>Minimum 5 years of experience in commissioning and start-up activities.<br><br>Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer.<br><br>Previous experience in offshore Oil & Gas projects is highly preferred.

<ol><li><p>Coordinate with section engineers in reviewing CMMS project deliverables.</p></li><li><p>Assist section engineers in SAP PM Master Data IDB review and completion.</p></li><li><p>Coordinate with CMMS Contractors on the project progress reports and Transmittals Log.</p></li><li><p>Work with section engineers to fully capture the asset integrity relevant master data through</p></li></ol><p>CMMS works.</p><ol><li><p>Collect data & populate Interim Data Base (IDB) for small sized in-house CMMS projects.</p></li><li><p>Perform necessary site validation for M.O assets as part of SAP Master Data updates in</p></li></ol><p>Master Data audits.</p><ol><li><p>Update Functional Location Data, Equipment Data, Maintenance Planning Data, Bill of</p></li></ol><p>Material Data and other related PM Master Data in SAP that are requested through e-SUR.</p><ol><li><p>Collect and Review Maintenance transactional data and historical data, which are relevant,</p></li></ol><p>significant to Mesaieed operations Maintenance Optimization activity.</p><ol><li><p>Verify that Equipment breakdown status & equipment history are properly populated in</p></li></ol><p>SAP.</p><p>10.Assist the Optimization engineers in carrying out optimization studies including</p><p>Maintenance Strategy optimization, FMEA/ACA in APMS tool.</p><p>11.Liaise with reliability section to assure that correct failure codes are assigned to M2</p><p>notifications.</p><p>12.Assist in preparing presentations, databases using MS access, and other computerized</p><p>formats and the like for system improvements and business improvements.</p><p>13.Assist the section engineer in preparation of business-related presentations and reports</p><p><strong>Desired Candidate Profile</strong></p><p>Asset Integrity Optimization Engineer – CMMS & Master Data Esmera Global Solutions is looking for an experienced CMMS / SAP PM / Asset Master Data professional for an Oil & Gas opportunity in Qatar. Priority: candidates currently in Qatar with a valid QID / immediate availability. Requirements: Bachelor’s degree in Mechanical, Electrical, Instrumentation or Industrial Engineering Minimum 8 years of plant maintenance experience in Oil & Gas Minimum 8 years of experience preparing CMMS data for SAP R/3 Strong knowledge of SAP PM Master Data Hands-on experience with Functional Locations, Equipment Master Data, Maintenance Planning Data and BOM Experience with SAP notifications, work orders and confirmations Experience in site asset verification and interpretation of engineering drawings Experience with SPIR/SPF and maintenance spare planning Good knowledge of Reliability Engineering and Maintenance Optimization Experience with APMS asset strategies Participation in FMEA / ACA / RSA studies and workshops Knowledge of Defect Elimination, Bad Actor Management and Safety Critical Elements Exposure to Risk-Based Work Selection and maintenance prioritization Strong data management, MS Access and MS Office skills</p>

<p>Job Description Degree in Mechanical, Electrical Engineering or similar With 5+ years overall experience with3 years experience of managing comparable operation(s) in GCC region Good working knowledge of mechanical &amp; electrical systems (HVAC systems &amp; applications and ELV systems) (electrical, control, ELV, BMS etc.) applicable to Schools or similar Certified QCDD Engineer preferred Grade B classified preferred approved from KAHRAMA/ relevant authorities Full compliance with international standards and standards applicable in the state of Qatar related to building maintenance Good knowledge of quality, health, safety and environmental management systems and regulations Strong analytical skills and problem-solving skills Good level of interpersonal and communication skills. Good language ability in both spoken and written English and Arabic Highly self-motivated and able to work under own initiative Ability to plan and organise and supervise teams and be decisive when required Responsibilities Conduct regular inspections of facilities and equipment to identify maintenance and repair needs Preparing the necessary reports to be shared with Clients Decision maker skills require Full experience in SLA and priorities Able to understand the Drawings and SLD, Riser etc. (CAD drawings) Full knowledge about the SOP &amp; O&amp;M , Standards (IEEE, ASHREA , ETC.) Experience in Escalation procedures. Full Knowledge about the Electrical, Mechanical, HVAC, Plumbing, chilled water system, Lead a supervisors &amp; Technicians to perform the required work as per schedule and PPM Prepare all necessary materials required for the required maintenance systems Experience in CAFM Systems for CM, PPM, Job Plan, checklist, Tools. Coordinate and oversee maintenance and repair activities, including routine maintenance, repairs, and upgrades Develop and implement preventive maintenance programs to ensure the ongoing reliability and safety of our facilities Create and maintain accurate records of maintenance and repair activities Ensure compliance with safety regulations and industry standards Identify opportunities for cost savings and efficiency improvements in facility operations Collaborate with internal teams, contractors, and vendors to coordinate facility-related projects Respond to facility emergencies and resolve issues in a timely manner</p><p><strong>Desired Candidate Profile</strong></p><p>Degree in Mechanical, Electrical Engineering or similar With 5+ years overall experience with 3 years experience of managing comparable operation(s) in GCC region Good working knowledge of mechanical &amp; electrical systems (HVAC systems &amp; applications and ELV systems) (electrical, control, ELV, BMS etc.) applicable to Schools or similar Certified QCDD Engineer preferred Grade B classified preferred approved from KAHRAMA/ relevant authorities Full compliance with international standards and standards applicable in the state of Qatar related to building maintenance Good knowledge of quality, health, safety and environmental management systems and regulations Strong analytical skills and problem-solving skills Good level of interpersonal and communication skills. Good language ability in both spoken and written English and Arabic Highly self-motivated and able to work under own initiative Ability to plan and organise and supervise teams and be decisive when required Requirements Bachelor s degree in mechanical engineering, Electrical Engineering, or a related field Minimum of 4 years of experience in facility management or a similar role Knowledge of building systems and maintenance best practices Strong problem-solving and analytical skills Ability to work independently and prioritize tasks effectively Excellent communication and interpersonal skills Fluent in speaking Arabic and English Proficiency in computer applications related to facility management Knowledge of safety regulations and compliance standards</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><h3>Job Description:</h3><p>Parsons is looking for an amazingly talented Senior Instrumentation Engineer to join our team in Qatar! In this role, you will lead the supervision of instrumentation, control and automation works on a major roads, infrastructure and drainage programme. The works include surface-water and foul-sewer pump stations, attenuation tanks, rising mains, drainage networks and associated PLC, SCADA, HMI, monitoring, protection and control systems.</p><h3>What You'll Be Doing:</h3><ul><li>Lead the consultant-side supervision of instrumentation, control and automation works across both work packages, with particular responsibility for pumping-station systems.</li><li>Review the Contractor s instrumentation and control shop drawings, calculations, material submittals, method statements, Inspection and Test Plans, control philosophies, cause-and-effect documents and technical submissions.</li><li>Supervise the installation, interfacing, testing and commissioning of field instruments on pump inlets, outlets, rising mains, tanks, chambers and associated infrastructure.</li><li>Verify the installation and operation of level, flow, pressure, vibration, conductivity and other monitoring and protection devices required by the approved design.</li><li>Review PLC, SCADA and HMI architecture, panel arrangements, input and output schedules, communications, alarms, interlocks, data logging and reporting requirements.</li><li>Verify that hardwired and software interlocks provide the required pump protection and safe operation, including low-level, no-flow, high-pressure and flood-alarm functions.</li><li>Review interfaces between field instrumentation, VFD or soft-starter panels, main PLCs, local SCADA, remote systems and associated electrical and mechanical equipment.</li><li>Coordinate instrumentation requirements with the mechanical, electrical, civil, structural, process, SCADA, communications and commissioning teams.</li><li>Witness factory inspections, Factory Acceptance Tests, Site Acceptance Tests, loop checks, calibration, point-to-point testing, functional testing and integrated system testing.</li><li>Review the Contractor s testing and commissioning procedures, schedules, readiness documentation and system integration plans.</li><li>Monitor installation quality, cable termination, tagging, calibration, configuration, preservation and protection of instrumentation and control equipment.</li><li>Review technical queries, proposed substitutions, software or configuration changes and site constraints, and provide recommendations to the Resident Engineer and supervision team.</li><li>Raise and track site observations and Non-Conformance Reports, review corrective actions and verify satisfactory close-out.</li><li>Review operation and maintenance manuals, training materials, spare-parts schedules, special tools, software, asset data, as-built drawings and handover dossiers.</li><li>Support performance demonstrations, operator training, final handover and inspections during the maintenance period.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Instrumentation Engineering, Control and Automation Engineering, Electrical Engineering, Electronics Engineering or an equivalent relevant discipline.</li><li>More than 14 years of post-graduate professional experience, including at least 10 years of experience in a similar senior instrumentation, control or automation role.</li><li>Professional experience in the Middle East is required.</li><li>Substantial experience working for an engineering consultant or Engineer s Representative on major infrastructure, drainage or pumping-station construction-supervision assignments.</li><li>Demonstrable experience supervising instrumentation, control and automation systems for surface-water, stormwater, wastewater or foul-sewer pumping stations.</li><li>Experience with PLC, SCADA, HMI, industrial communications, field instrumentation, alarms, interlocks, data logging and automated pump-station operation.</li><li>Experience with level, flow, pressure, vibration, conductivity and other process-monitoring and protection instruments.</li><li>Experience reviewing shop drawings, instrument schedules, input and output lists, control philosophies, cause-and-effect documents, material submittals, method statements and Inspection and Test Plans.</li><li>Practical experience witnessing Factory Acceptance Tests, Site Acceptance Tests, calibration, loop checks, point-to-point tests, functional tests and integrated system testing.</li><li>Experience coordinating instrumentation interfaces with mechanical, electrical, SCADA, communications and control systems.</li><li>Thorough knowledge of applicable Qatar Construction Specifications, Authority ICA requirements, contract requirements and relevant international instrumentation and control standards.</li><li>Ability to manage and coordinate a specialised instrumentation function and independently perform complex professional assignments requiring the application of specialist principles.</li><li>Professional registration or chartered status is preferred.</li><li>MME engineering certification is required for personnel deployed under the contract. An overseas recruit who does not hold the certification at mobilisation must obtain it within the period permitted by the contract.</li><li>Fluent written and spoken English, with strong technical reporting, correspondence, presentation and stakeholder-communication skills.</li><li>Full computer literacy and the ability to use relevant engineering, configuration, reporting, document-control and project-information systems.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Our Habitas is a global home for a global community of like-minded people seeking connection, inspiration and a better future together. Their experience is powered by music, wellness, art, adventure, food, learning and giving back. Through these pillars, they craft magical worlds of wonder in which strangers become friends and friends become family. This is what Our Habitas call luxury for the soul. Some experiences at Our Habitas have been so impactful that they have made them ritualistic, existing at each of their homes around the world in their own unique way. From the Welcome Ceremony to Family Dinner through to Storytelling and Sunday Sunset Sessions, Our Habitas seek to provide a new kind of hospitality where they bridge the gap between old-world luxury and experiential-first travel.</p><br><br>Job Description<br><br><p>The Assistant Engineering Manager supports the overall management of the Engineering Department, ensuring that the resort’s facilities, equipment, guest villas, public areas, Heart of House areas, and technical systems are maintained to the highest standards of safety, functionality, efficiency, and guest experience.</p><br><p>The role supports the Director of Engineering/Chief Engineer in leading the Engineering team, implementing preventive maintenance programs, responding to operational requirements, managing contractors and suppliers, controlling costs, and ensuring compliance with all applicable health, safety, environmental, and statutory requirements.</p><br><p>As part of Our Habitas Ras Abrouq, the Assistant Engineering Manager is expected to combine strong technical expertise with a hands-on, solutions-focused leadership approach, ensuring that engineering operations contribute positively to both the guest and associate experience.</p><br><p><strong>DUTIES &amp; RESPONSIBILITIES</strong></p><br><p><strong>Engineering Operations &amp; Maintenance</strong></p><br><ul><li>Support the day-to-day operation of the Engineering Department and ensure the smooth functioning of all resort facilities and equipment.</li><li>Conduct regular inspections of guest villas, public areas, F&amp;B outlets, kitchens, offices, associate areas, and other facilities to identify maintenance requirements.</li><li>Ensure all mechanical, electrical, plumbing, HVAC, refrigeration, water, drainage, and other building systems are maintained in safe and efficient operating condition.</li><li>Respond promptly to engineering-related guest and operational requests, prioritizing issues according to urgency and potential impact.</li><li>Troubleshoot technical problems and provide practical solutions to minimize operational disruption.</li><li>Coordinate repairs and maintenance activities with other departments to minimize inconvenience to guests.</li><li>Ensure engineering workshops, plant rooms, storage areas, and technical spaces are maintained in a safe, clean, and organized condition.</li></ul><p><strong>Preventive Maintenance &amp; Asset Management</strong></p><br><ul><li>Support the implementation and monitoring of the resort's preventive maintenance program.</li><li>Ensure preventive maintenance schedules are completed on time and accurately documented.</li><li>Maintain appropriate records for equipment servicing, repairs, inspections, warranties, and maintenance history.</li><li>Identify recurring defects and conduct root-cause analysis to reduce repeat breakdowns.</li><li>Monitor the condition and performance of resort assets and recommend repair, replacement, or improvement where required.</li><li>Ensure critical spare parts and engineering supplies are maintained at appropriate levels, particularly considering the resort's remote location.</li></ul><p><strong>Guest Experience</strong></p><br><ul><li>Ensure all engineering concerns affecting guests are addressed with urgency, professionalism, and sensitivity.</li><li>Work closely with Front Office, Housekeeping, F&amp;B, Spa, Security, and other departments to resolve maintenance-related guest concerns.</li><li>Personally follow up on significant or recurring technical issues affecting the guest experience.</li><li>Ensure Engineering associates demonstrate appropriate grooming, communication, and service standards when working in guest-facing areas or occupied villas.</li><li>Promote a preventive approach to maintenance to minimize technical issues before they impact guests.</li></ul><p><strong>Team Leadership</strong></p><br><ul><li>Assist in leading, supervising, scheduling, and developing the Engineering team.</li><li>Allocate daily assignments and ensure appropriate follow-up and completion of work orders.</li><li>Conduct daily briefings and ensure effective communication and handover between shifts.</li><li>Monitor team performance and provide regular coaching, feedback, and technical guidance.</li><li>Support the training and development of Engineering associates to improve technical capability and operational effectiveness.</li><li>Promote teamwork, accountability, ownership, and a positive working environment.</li><li>Support the Director of Engineering/Chief Engineer in managing performance and addressing conduct or performance concerns in coordination with People &amp; Culture.</li><li>Assume responsibility for the Engineering Department in the absence of the Director of Engineering/Chief Engineer when required.</li></ul><p><strong>Health, Safety &amp; Compliance</strong></p><br><ul><li>Ensure engineering activities comply with all applicable health, safety, fire and life safety, environmental, and statutory requirements.</li><li>Ensure team members follow appropriate safety procedures, including the correct use of PPE, tools, equipment, and chemicals.</li><li>Participate in fire and life safety inspections, emergency preparedness, drills, and testing of critical systems.</li><li>Identify and immediately report potential hazards and take appropriate corrective action.</li><li>Ensure contractors comply with the resort's safety and security requirements while working on property.</li><li>Maintain accurate inspection, testing, maintenance, and compliance records.</li></ul><p><strong>Energy &amp; Sustainability</strong></p><br><ul><li>Monitor energy and water consumption and identify opportunities to improve efficiency.</li><li>Support initiatives to reduce energy consumption, water usage, waste, and the resort's environmental impact.</li><li>Promote environmentally responsible engineering practices aligned with the sustainability philosophy of Our Habitas.</li><li>Recommend technical improvements that contribute to both operational efficiency and sustainability.</li></ul><p><strong>Financial &amp; Inventory Management</strong></p><br><ul><li>Support the Director of Engineering/Chief Engineer in preparing and managing the department's operating and capital expenditure requirements.</li><li>Monitor engineering expenses and identify opportunities for cost efficiency without compromising safety, asset condition, or guest experience.</li><li>Maintain appropriate inventory levels of spare parts, tools, and engineering supplies.</li><li>Assist with sourcing quotations and coordinating with approved suppliers and contractors.</li><li>Monitor contractor performance and ensure services are delivered according to agreed standards.</li><li>Support annual budgeting and capital expenditure planning as required.</li></ul><p><strong>Administration &amp; Reporting</strong></p><br><ul><li>Maintain accurate records of work orders, preventive maintenance, equipment history, inspections, and repairs.</li><li>Prepare engineering reports and operational updates as required.</li><li>Monitor outstanding work orders and ensure appropriate escalation and closure.</li><li>Assist in maintaining equipment manuals, drawings, warranties, contracts, certificates, and other technical documentation.</li><li>Participate in departmental and operational meetings and provide relevant engineering updates.</li></ul><br>Qualifications<br><br><ul><li>Diploma or degree in Electrical, Mechanical, Building Services Engineering, Facilities Management, or a related technical discipline.</li></ul><p><strong>Experience</strong></p><br><ul><li>Previous engineering experience within a hotel, resort, or hospitality environment is strongly preferred.</li><li>Minimum 3–5 years of progressive engineering/maintenance experience, including supervisory or team leadership exposure.</li><li>Luxury hotel or resort experience is an advantage.</li><li>Strong working knowledge of HVAC, electrical, plumbing, mechanical, refrigeration, water systems, pumps, generators, and general building maintenance.</li><li>Good understanding of preventive maintenance systems and asset management.</li><li>Knowledge of fire and life safety systems, occupational health and safety requirements, and safe working practices.</li><li>Experience working with contractors, suppliers, inventories, and engineering documentation.</li><li>Previous experience in a remote resort environment is an advantage.</li></ul><br>Additional Information<br><br><p><strong>What's in it for you...</strong></p><br><ul><li>The opportunity to join an innovative, fast-growing, international group that’s committed to not just building new hotels but building a global brand.</li><li>The chance to challenge the norm and work in an environment that is both creative and rewarding.</li><li>Become part of a team that’s very passionate about creating great hospitality experiences and exploring new locations at every opportunity.</li><li>A competitive package and plenty of opportunity for development.</li><li>Excellent discounts across the entire Ennismore family of brands.</li></ul><p><em>Working at&nbsp;<strong>Our Habitas</strong>&nbsp;means being part of a purpose-driven movement. You will help shape stories that go beyond rooms and amenities, creating emotional experiences and connecting people through shared rituals, culture, and a sense of belonging.</em></p><br><p><em>If you believe in&nbsp;<strong>luxury that speaks to the soul</strong>, and want to build something meaningful in two of Middle East's most extraordinary destinations, we’d love to meet you.</em></p><br> </div>

Additional Information<br><br>Job Number 26109938<br><br>Job Category Engineering & Facilities<br><br>Location Building No. 3, Street No. 353, Lusail, Qatar, Qatar, 4010VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>오토그래프 컬렉션은 여행객들에게 각자의 스타일과 여행 취향에 맞는 다양하고 독특한 경험을 제공합니다. 퀄리티와 독창성, 그리고 대담한 개성을 갖춘 4:5성급의 호텔로 구성된 오토그래프 컬렉션은 브랜드의 대상 고객인 '개인의 가치를 중시하는 여행자'를 모시고자 노력하고 있습니다. 이러한 여행자는 여행을 자신의 개인적인 스토리에 추가할 기회로 삼는 사람입니다. 본질적으로 개인의 가치를 중시하는 성향의 여행자에게 있어서 호텔이란 단순히 휴식을 취하는 그 이상의 의미가 있는 곳이기 때문에 이들은 개인 여행이나 출장 시 호텔을 직접 선택합니다. 여러분이 오토그래프 컬렉션에 입사하면 메리어트 인터내셔널의 브랜드 포트폴리오에 합류하게 됩니다. 최선 을 다해 일하고 , 목표를 향해 달리며, 훌륭한 글로벌 팀의 일원으로 최고의 나를 만들고 싶다면 오토그래프 컬렉션의 문을 두드리세요.

<p>This position is responsible for providing expert quality management leadership and technical guidance across offshore projects, with full accountability for the effective implementation and continual improvement of the Quality Management System (QMS) within the Offshore Projects Department. The role ensures compliance with QatarEnergy standards, Shell DEP requirements, project specifications, and applicable international codes and standards throughout all project phases. The successful candidate will oversee the development, implementation, and monitoring of Project Quality Plans (PQPs) to ensure quality objectives are achieved and regulatory and contractual requirements are consistently met.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 15 years of QA/QC experience in the oil and gas industry, including significant offshore project experience.</li><li>At least 5 years' experience in a similar Senior QA/QC Engineer or equivalent position.</li><li>Qualified ISO 9001 Lead Auditor additional quality-related certifications are preferred.</li><li>Strong knowledge of quality management systems, international codes, standards, and QA/QC best practices.</li><li>Experience across the full project lifecycle, including engineering, procurement, construction, and commissioning.</li><li>Working knowledge of equipment and material inspection, certification processes, and associated QA/QC requirements.</li><li>Sound understanding of offshore construction, welding, and non-destructive examination (NDE) techniques.</li><li>Excellent English communication skills, both written and spoken.</li><li>Bachelor's degree in Engineering from a recognized university, preferably Mechanical Engineering.</li><li>Master's degree in a relevant discipline is preferred.</li><li>Membership of a recognized professional engineering institution is advantageous.</li><li>Chartered Engineer status or equivalent professional accreditation is desirable.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>This position is responsible for providing expert quality management leadership and technical guidance across offshore projects, with full accountability for the effective implementation and continual improvement of the Quality Management System (QMS) within the Offshore Projects Department.</p><br><p>The role ensures compliance with QatarEnergy standards, Shell DEP requirements, project specifications, and applicable international codes and standards throughout all project phases. The successful candidate will oversee the development, implementation, and monitoring of Project Quality Plans (PQPs) to ensure quality objectives are achieved and regulatory and contractual requirements are consistently met.</p><br><br> <br><strong>Required Experience and Skills</strong><br><ul><li>Minimum 15 years of QA/QC experience in the oil and gas industry, including significant offshore project experience.</li><li>At least 5 years' experience in a similar Senior QA/QC Engineer or equivalent position.</li><li>Qualified ISO 9001 Lead Auditor; additional quality-related certifications are preferred.</li><li>Strong knowledge of quality management systems, international codes, standards, and QA/QC best practices.</li><li>Experience across the full project lifecycle, including engineering, procurement, construction, and commissioning.</li><li>Working knowledge of equipment and material inspection, certification processes, and associated QA/QC requirements.</li><li>Sound understanding of offshore construction, welding, and non-destructive examination (NDE) techniques.</li><li>Excellent English communication skills, both written and spoken.</li></ul> <br><strong>Educational Qualifications</strong><br><ul><li>Bachelor's degree in Engineering from a recognized university, preferably Mechanical Engineering.</li><li>Master's degree in a relevant discipline is preferred.</li><li>Membership of a recognized professional engineering institution is advantageous.</li><li>Chartered Engineer status or equivalent professional accreditation is desirable.</li></ul> </div>

<p>As a Kitchen &amp; Laundry Technician , you will be responsible for maintaining and servicing all kitchen and laundry equipment to the highest standards of excellence. Your role is critical to ensuring seamless operations across our culinary and housekeeping departments, directly supporting our commitment to exceptional guest experiences.</p><p>Inspect, maintain, and repair kitchen equipment including ovens, stoves, grills, refrigerators, freezers, dishwashers, and exhaust systems to premium operational standards</p><p>Maintain and service laundry equipment including washers, dryers, steamers, and ironers to ensure consistent quality and efficiency</p><p>Perform preventive maintenance according to established schedules to minimize equipment downtime and ensure uninterrupted service delivery</p><p>Respond promptly to urgent repair requests from kitchen and housekeeping departments to maintain guest satisfaction</p><p>Diagnose faults in electrical and mechanical systems and execute necessary repairs or recommend equipment replacements</p><p>Coordinate with specialized vendors for complex repairs and parts procurement to maintain equipment integrity</p><p>Ensure strict compliance with health, safety, and fire regulations related to all electrical and gas-powered appliances</p><p>Maintain comprehensive documentation of all maintenance activities and equipment service history for audit and compliance purposes</p><p>Assist in the installation and setup of new equipment when required</p><p>Maintain a clean, organized, and safe maintenance workshop and tool inventory</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications</p>