Heavy equipment mechanical engineer Jobs

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Under general supervision, the Timekeeper is responsible for maintaining accurate daily records of contractor manpower and equipment at project sites. The role includes conducting regular site visits to verify attendance, monitor deployed resources, and prepare detailed daily and weekly reports using standard templates and Excel sheets. The position supports the supervision consultant team by ensuring that manpower and equipment data are properly collected, verified, and reported for management and client review.</p><p><strong>SPECIFIC RESPONSIBILITIES:</strong></p><ul><li>Conducts daily site visits to record and verify contractor manpower and equipment in operation as per the approved schedules.</li><li>Maintains detailed daily logs of labor attendance and equipment utilization at each site.</li><li>Prepares daily, weekly, and monthly manpower and equipment reports in Excel and other prescribed formats.</li><li>Coordinates with site engineers, contractor representatives, and supervision staff to confirm daily records.</li><li>Reviews and validates contractor-submitted time sheets and equipment logs to ensure accuracy.</li><li>Identifies and reports discrepancies or shortfalls in manpower or equipment deployment to the supervision team.</li><li>Maintains organized filing systems for attendance sheets, equipment records, and related documentation (both digital and hard copies).</li><li>Prepares summary charts, graphs, and performance indicators showing trends in manpower and equipment utilization.</li><li>Supports the supervision team in monitoring resource productivity and site progress based on verified data.</li><li>Performs other related duties as required to assist project supervision and reporting activities.</li></ul><p><strong>KEY RELATIONSHIPS:</strong></p><p><strong>Supervision Received:</strong> Site Engineer / Construction Manager / Project Controls Engineer</p><p><strong>Supervision Given:</strong> None</p><p><strong>Internal Contacts:</strong> Project supervision staff, administrative personnel, document controllers</p><p><strong>External Contacts:</strong> Contractor timekeepers, site supervisors, and equipment coordinators</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required; additional training or diploma in administration, construction management, or related field is preferred.</li><li>Typically 1-2 years of relevant experience in timekeeping, manpower tracking, or similar field within a construction or consultancy environment.</li><li>Proficiency in Microsoft Excel, Word, and PowerPoint.</li><li>Strong numerical and analytical skills with attention to detail and accuracy.</li><li>Good understanding of construction site activities and resource tracking procedures.</li><li>Excellent organizational and time management abilities.</li><li>Strong verbal and written communication skills.</li><li>Ability to work efficiently in both office and site environments.</li><li>Dedicated to maintaining accuracy, transparency, and timely reporting.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>• 5+ years of experience as a </span><b><span>Millwright / Mechanical Maintenance Technician</span></b><br><br><span>• Experience in </span><b><span>Direct Reduction (DR) plants / Steel / Heavy Industrial</span></b><span> environments preferred</span><br><br><span>• Skilled in </span><b><span>installation, alignment, maintenance &amp; repair of mechanical equipment</span></b><br><br><span>• Experience with </span><b><span>rotating equipment, gearboxes, pumps, conveyors &amp; mechanical systems</span></b><br><br><span>• Knowledge of </span><b><span>bearing replacement, shaft alignment, lubrication &amp; mechanical troubleshooting</span></b><br><br><span>• Ability to read </span><b><span>mechanical drawings, equipment manuals &amp; maintenance procedures</span></b><br><br><span>• Experience in </span><b><span>preventive and corrective maintenance</span></b><span> activities</span><br><br><span>• Knowledge of </span><b><span>hydraulic and pneumatic systems</span></b><span> preferred</span><br><br></span><br> </div>

<p><strong>Company Description</strong> is a diversified organization operating in Qatar, with a focus on delivering reliable services across industrial and infrastructure sectors. The company supports projects that rely on heavy equipment and vehicle fleets, emphasizing safety, efficiency, and operational excellence. Ahdaaf Holding values technical expertise, continuous improvement, and adherence to industry best practices. Team members are encouraged to contribute to a collaborative work environment and support the long-term growth of the company.</p><p><strong>Role Description</strong> The Heavy Equipment i</p><p> Mechanic is a full-time, on-site role based in Qatar, responsible for maintaining and repairing a variety of heavy equipment and vehicles used in operations. Day-to-day tasks include performing routine inspections, diagnosing mechanical, hydraulic, and electrical issues, carrying out preventive and corrective maintenance, and completing repairs to </p><p>ensure equipment reliability and safety. The role involves documenting work performed, following maintenance schedules, and coordinating with supervisors and operators to minimize downtime. The mechanic is expected to adhere to safety standards, use appropriate tools and diagnostic equipment, and support continuous improvement of maintenance processes.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Candidates should possess strong skills in Equipment Maintenance and Vehicle Maintenance.</li><li>Candidates should possess practical experience working with Heavy Equipment and related systems.</li><li>Candidates should possess proven abilities in Equipment Repair and Troubleshooting.</li><li>Relevant technical certification or diploma in mechanics, automotive, or heavy equipment technology is preferred.</li><li>Experience in industrial, construction, or fleet maintenance environments is beneficial.</li><li>Ability to read and interpret technical manuals, schematics, and maintenance documentation.</li><li>Commitment to workplace safety, use of PPE, and adherence to company policies and procedures.</li><li>Strong communication skills and ability to work collaboratively with diverse teams.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Storekeeper Assistant is responsible to support efficient inventory management by assisting with the receipt, storage, and issuance of goods. They aid in maintaining accurate records, organizing stock, and ensuring timely fulfillment of orders, contributing to the smooth operation of warehouse activities. Additionally, Storekeeper Assistants assist in maintaining cleanliness and safety standards within the warehouse environment. </p><br> <br><br><u><b>Job Roles &amp; Responsibilities</b></u> <br><p>Assist in receiving incoming shipments and verifying their contents against purchase orders or packing lists.</p><br> <p>Aid in organizing and storing goods in designated warehouse locations, ensuring efficient space utilization.</p><br> <p>Assist in picking and packing orders accurately and timely for shipment or delivery.</p><br> <p>Help in conducting regular inventory counts and reconciling discrepancies between physical stock and system records.</p><br> <p>Support in maintaining cleanliness and organization within the warehouse, including sweeping floors and organizing storage areas.</p><br> <p>Assist in loading and unloading trucks or containers using appropriate equipment or manual labor.</p><br> <p>Aid in preparing and labeling goods for shipment or storage according to established procedures.</p><br> <p>Assist in conducting routine maintenance checks on warehouse equipment and reporting any issues or malfunctions.</p><br> <p>Follow safety protocols and guidelines to ensure a safe working environment for yourself and others.</p><br> <p>Collaborate with warehouse staff and supervisors to ensure smooth operations and timely completion of tasks.</p><br> <p>Assist in performing other duties or tasks assigned by warehouse management to support overall warehouse operations.</p><br> <br><br><u><b>Additional Job Roles &amp; Responsibilities</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge</b></u> <br><p>Understanding of inventory management principles and practices, including receiving, storing, and issuing goods, as well as conducting regular stock counts and reconciliations.</p><br> <p>Ability to accurately record and verify incoming shipments, maintain organized storage areas, and pick and pack orders with precision to minimize errors and discrepancies.</p><br> <p>Knowledge of warehouse operations, including familiarity with storage equipment, safety procedures, and inventory control systems to contribute effectively to daily activities.</p><br> <p>Effective communication skills to interact with warehouse staff, suppliers, and delivery personnel, conveying information clearly and professionally to ensure efficient workflow and teamwork.</p><br> <p>Physical stamina and manual dexterity to perform tasks such as lifting, carrying, and moving heavy objects, as well as operating warehouse equipment safely and effectively.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 3 year(s) working experience, 2 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Safety Procedures and Compliance L1<br>AI Fluency<br>Inventory and Supplies Audits L1<br>Inventory Control L1<br>Shipping &amp; Receiving Operations L1<br>Agility<br>Warehousing Operations L1<br>Resilience<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br>High School Diploma<br><br><br><br> </div>

Company Description Al Habari Group is one of Qatar’s longest-standing business groups, contributing to the country’s growth since 1982. The group operates across multiple sectors, including real estate, engineering and EPC, scrap and demolition, transport and auto services, as well as retail and trading. Al Habari Group is ISO-certified (9001, 14001, 45001), reflecting a strong commitment to quality, safety, and environmental standards. Based in Al Khor and serving clients across Qatar, the group provides commercial and office spaces, villas, warehouses, heavy equipment rentals, tools, materials, food products, and more. Applicants joining Al Habari Group will be part of a diversified organization with a solid reputation and long-term stability. Role Description The Senior Human Resources Generalist is a full-time, on-site role based in Al Khor , Qatar. This role is responsible for managing day-to-day HR operations, including employee relations, performance management support, and HR policy implementation. The Senior HR Generalist will oversee benefits administration, onboarding and offboarding processes, and ensure compliance with local labor laws and company standards. Daily tasks include supporting managers with HR guidance, handling employee inquiries, maintaining HR records and systems, and contributing to continuous improvement of HR processes. The role also involves partnering with leadership on workforce planning, supporting recruitment activities, and promoting a fair, inclusive, and safe work environment. Qualifications Candidates should possess strong Human Resources (HR) and HR Management skills, with experience in generalist or similar HR roles. Candidates should possess the ability to develop, interpret, and implement HR Policies aligned with organizational and legal requirements. Candidates should possess expertise in Employee Benefits and Benefits Administration, including enrollment, communication, and issue resolution. Candidates should possess solid knowledge of local labor laws, regulatory compliance, and best practices in workplace ethics and diversity. Relevant qualifications such as a bachelor’s degree in Human Resources, Business Administration, or a related field; professional HR certifications are an advantage. Strong communication, problem-solving, and conflict-resolution skills, with the ability to work collaboratively across diverse teams. Experience using HRIS and MS Office tools, and the ability to manage confidential information with discretion. Prior HR experience within diversified business sectors, Oil & Energy sector or similar regional markets is preferred. Candidate must have experience in working with than 2000 Employees

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>MECHANICAL SUPERVISOR</b></p><p><br></p><p>Position: Mechanical Supervisor</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p><b><i>Key Responsibilities:</i></b></p><ul><li>Supervise and coordinate mechanical maintenance, installation, and troubleshooting activities in industrial facilities.</li><li>Lead technicians and subcontractors to ensure safe and efficient execution of work.</li><li>Plan preventive and corrective maintenance activities for rotating and static equipment.</li><li>Ensure compliance with HSE regulations, company procedures, and quality standards.</li><li>Prepare maintenance reports, work schedules, and technical documentation.</li><li>Coordinate with operations and engineering teams to minimize downtime.</li></ul><p><br></p><p><b><i>Requirements:</i></b></p><ul><li>Diploma or Bachelor's degree in Mechanical Engineering or related field.</li><li>Minimum 5 years of experience in industrial plants, utilities, manufacturing, oil &amp; gas, or infrastructure projects.</li><li>Strong knowledge of pumps, compressors, conveyors, hydraulic and pneumatic systems.</li><li>Experience in preventive and corrective maintenance programs.</li><li>Good leadership and communication skills.</li><li>Valid Qatar driving license is preferred.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul><p><br></p><p><br></p><p><b>MECHANICAL ENGINEER</b></p><p><br></p><p>Position: Mechanical Engineer</p><p>Location: Qatar</p><p>Employment Type: Full-Time</p><p><br></p><p><b><i>Key Responsibilities:</i></b></p><ul><li>Design, monitor, and optimize mechanical systems and equipment within industrial facilities.</li><li>Prepare technical specifications, maintenance plans, and engineering reports.</li><li>Analyze equipment performance and implement improvement initiatives.</li><li>Support installation, commissioning, and troubleshooting activities.</li><li>Coordinate with multidisciplinary teams to ensure project and operational requirements are met.</li><li>Ensure compliance with industry standards and safety regulations.</li></ul><p><br></p><p><b><i>Requirements:</i></b></p><ul><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum 5 years of industrial experience in utilities, manufacturing, infrastructure, or oil &amp; gas sectors.</li><li>Strong knowledge of pumps, compressors, conveyors, HVAC, hydraulic, and pneumatic systems.</li><li>Experience with maintenance management systems and technical documentation.</li><li>Excellent analytical and problem-solving skills.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul><p><br></p><p><b><i>What We Offer:</i></b></p><ul><li>Competitive salary based on experience</li><li>Opportunity to work on international-standard projects</li><li>Career growth into Senior position roles</li><li>Hands-on training with advanced automated waste collection system technologies</li><li>Supportive engineering team environment</li></ul><p><br></p><p><b><i>About the Company:</i></b></p><p>Envac is a global, innovative leader in the automated waste collection industry, recognised as the true inventor of the pneumatic waste collection system. Through a commitment to innovation and ingenuity, Envac excels in designing and implementing advanced, resource-efficient waste management solutions. Our vision is to create smarter cities, improve the quality of life today, and help secure a greener planet for future generations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of pumps, compressors, conveyors, HVAC, hydraulic, and pneumatic systems.</li><li>Experience with maintenance management systems and technical documentation.</li><li>Excellent analytical and problem-solving skills.</li><li>Must be locally available in Qatar with transferable visa and NOC.</li></ul></div>

<strong>Building on our past. Ready for the future<br><br></strong>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br><strong>Responsibilities<br><br></strong><ul><li>Supports the standardization of equipment specifications, drawings, and document templates. </li><li>Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. </li><li>Uses local/global standards to support technical excellence. </li><li>Supports document checking and design verification tasks for compliance to company and project specifications. </li><li>Technical supervision of project designated mechanical designers and draftsmen in the execution of their duty. </li><li>Prepare of specifications, data sheets and other information covering Rotating equipment and system packages. </li><li>Performance of bid evaluation and vendor document review and approval </li><li>Technical writing activities, in particular, production of technical reports and operating manuals. </li><li>Manage studies and mechanical-rotating-orientated projects as assigned. </li><li>Preparation of technical requisition, stipulation of inspection and testing requirement and documentation </li><li>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. </li><li>Supports Lead Engineer in monitoring quality activities and takes action where required. </li><li>Assist Project Team in project documentation such as proposals, estimates, budgets and schedules </li><li>Prepare and participate in weekly mechanical discipline meetings, prepare progress reports and follow required checking procedures. </li><li>Review and approve all related technical documents and coordinate with the Lead Engineer. </li><li>Management, technical execution and completion of engineering assigned tasks in the specific mechanical-rotating discipline area Provide rotating equipment engineering input to conceptual studies, front end engineering and detailed engineering design for petrochemical, refineries and oil &amp; gas facilities including the associated utilities. </li><li>Quality Assurance: Accountable for working within the provisions and guidelines of Quality Assurance systems.</li><li>Safety: Accountable for personal safety safe, safe working practices. Working knowledge and follow OH &amp; S procedures promoting health, safety and environmental awareness.</li><li>HSE Capability:</li><ul><li>Maintain HSE focus with the team to ensure OHSE requirements.</li><li>Demonstrate business practices commensurate with a culture of world’s best health, safety and environmental performance.</li><li>Demonstrate a visible and engaged reliability to:</li><li>personal well-being;</li><li>healthy and safe workplaces and activities; and</li><li>Continuously improve Worley health, safety and environmental performance.</li><li>Identify and report work hazards and incidents. <br></li></ul></ul><strong>Education – Qualifications, Accreditation, Training<br><br></strong><ul><li>Full-Time Bachelor’s Degree in Mechanical Engineering from an accredited university. </li><li>MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. </li><li>Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br></li></ul><strong>Industry Experience<br><br></strong><ul><li>Candidate shall have vast experience in Oil &amp; Gas sector in GCC </li><li>Candidate must have experience in Detailed Design, FEED in Mechanical Engineering </li><li>Candidate shall have Mechanical engineering knowledge and familiar with Standards/Codes, QP specs.</li><li>Past experience as a Rotating Engineer for Upstream &amp; Midstream Gas Turbines will be an advantage </li><li>Must have good experience with compressors &amp; Pumps <br><br></li></ul><strong>Moving forward together<br><br></strong>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>To operate radiology equipment including but not limited to Xray, CT, Dexa, Mammogram, Fluoroscopy, MRI, interventional as applicable equipment including CT for diagnostic purposes. To prepare and assist patients during radiological exams and testing. To prepare and maintain radiographic records.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Collects key information from the patient, family, provider, and nurses that are specific to the exam being performed to assist the provider in the proper diagnosis.&nbsp;</p><br> <p>Educates patient, family, or provider as to the extent and detail of each procedure, may including informed consent as well as pre- and- post- procedure instructions.&nbsp;</p><br> <p>Ensures the proper exam is being administered to the patient. </p><br> <p>Consults provider as needed.&nbsp;</p><br> <p>Maintains accurate inventory levels of all supplies as required.&nbsp;</p><br> <p>Performs daily equipment inspections.&nbsp;</p><br> <p>Participates in on-call rotation as needed.&nbsp;</p><br> <p>Practises guidelines specific to ALARA policy (As Low as Reasonably Achievable).&nbsp;</p><br> <p>Assists the daily patients in the general x-ray Services in liaison with the Technologist II and Supervisor to ensure that the department runs efficiently.&nbsp;</p><br> <p>Helps in implementing all policies and procedures relating specifically to general x-rays.&nbsp;</p><br> <p>Keeps up to date with general x-rays development.&nbsp;</p><br> <p>Performs high quality examinations as required by referring Physicians according to the departmental policies and procedures. </p><br> <p>Ensures that all patients being investigated receive a high standard of care. </p><br> <p>Trains and works in other areas of the department considered appropriate.&nbsp;</p><br> <p>Performs other duties and responsibilities as assigned.&nbsp;</p><br> <p>Accurate informs patients where and when their results will be available and who will give the results to them. </p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Works accurately to maintain a high standard of imaging and keep patient waiting time to a minimum to comply with standards of quality.&nbsp;</p><br> <p>Ensures that monitoring standards provide a high-quality service for patient care, technical performance, and reporting.&nbsp;</p><br> <p>Participates in a Quality Assurance programme for equipment and Radiation Protection, maintaining accurate records and reporting problems to the Manager.&nbsp;</p><br> <p>Reports all equipment fault to the RSO, Manager and biomedical department as required by Policy.&nbsp;</p><br> <p>Creates and maintains good working relationships with all members of the Medical Imaging Department and works positively to develop a cohesive team.&nbsp;</p><br> <p>Liaises with the radiologists.&nbsp;</p><br> <p>Promotes good relations with referring clinicians, other hospital departments and outside organizations to ensure that the reputation of the Medical Imaging department and Elegancia Healthcare group is upheld.&nbsp;</p><br> <p>To be fully conversant with the Radiology Management System, and the computerized method of patient and examination documentation.&nbsp;</p><br> <p>Ensures that effective booking, information, reporting and filing systems are maintained and developed.&nbsp;</p><br> <p>Undertake to do any tasks as designated by the Manager/Supervisor in Medical Imaging department.&nbsp;</p><br> <p>Ensures that patient confidentiality is not breached.&nbsp;</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Excellent communication, interpersonal, and patient service skills.&nbsp;</p><br> <p>Ability to operate and understand radiographic technology and equipment.&nbsp;</p><br> <p>Physical stamina to stand for long periods and operate heavy machinery without assistance.&nbsp;</p><br> <p>Flexibility to work shifts, weekends, nights, and holidays.&nbsp;</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 2 years of Radiology experience (required).</p><br> <p>Minimum 1 year in GCC (preferred).</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Healthcare Regulations and Compliance L2<br>Patient Communication and Customer Service L2<br>Anatomy and Physiology L2<br>Patient Positioning and Radiation Protection L2<br>Radiation Safety and Protection L2<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in any related field<br><br><br><br> </div>

QA<br><br>Job Summary<br><br>The Maintenance Manager oversees and manages that all facilities, machinery, equipment are in good running condition at all times , Expert in electrical , HVAC and mechanical machine’s engineering matters within the corporation and provide technical leadership of the maintenance team, in delivering a high-level performance of machines in the restaurant advisory service related to all aspects of related issues. Controls and operates the preventive maintenance of firefighting system in the restaurant/outlets.<br><br>Job Responsibilities 1<br><br>Develop and implement maintenance strategies, plans, and schedules to ensure the efficient operation of facilities, equipment, and systems. Oversee a team of maintenance technicians, assigning tasks, providing guidance, and monitoring performance to ensure timely and effective completion of work. Conduct regular inspections of facilities, equipment, and infrastructure to identify maintenance needs, safety hazards, and opportunities for improvement. Coordinate with other departments, vendors, and contractors to schedule repairs, installations, and upgrades, minimizing downtime and disruptions to operations. Manage the maintenance budget, expenses, and resources effectively, optimizing costs while maintaining high standards of quality and safety. Ensure compliance with regulatory requirements, industry standards, and Company policies related to maintenance activities, safety protocols, and environmental regulations. Develop and implement preventive maintenance programs to prolong the lifespan of equipment and reduce the risk of unexpected failures or breakdowns. Maintain accurate records of maintenance activities, including work orders, inspections, repairs, and inventory, using maintenance management software or other tools. Train and mentor maintenance staff on proper procedures, techniques, and safety protocols, fostering a culture of continuous learning and improvement. Collaborate with senior management to develop long-term maintenance plans, capital improvement projects, and strategic initiatives to support organizational goals and objectives. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies<br><br>Job Knowledge & Skills<br><br>In-Depth knowledge of Facilities and Maintenance activities and equipment. Knowledge of Electricalprinciples. Know how to diagnose cause of electrical or mechanical malfunction/ failure of operational equipmentand performs preventive and corrective maintenance. Knowledge to modify electrical prototypes to correctfunctional deviations. Know how to read, interpret, develop wiring diagrams, layout drawings, and engineeringspecification for system or equipment modifications or expansion and directs personnel performing routineinstallation and maintenance duties. Knowledge of plans, directs and records periodical electrical testing andrecommends or initiates modification or replacement of equipment which fails to meet acceptable operatingstandards. Sound knowledge of MEP activities and equipment. ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.<br><br>Job Experience<br><br>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Supply &amp; Services Manager, the Driver Operator Lead supervises and leads a team responsible for loading and unloading, transporting, receiving, storing, and inventory control of materials and merchandise, ensuring safe, efficient, and timely operations. Responsible for the safe and efficient operation of Medium-Duty Trucks (5–13 tons), as well as vans, pickup trucks, and forklifts, in support of operational activities in Qatar. Responsibilities + Lead a team to accomplish provided tasks to standard. + Load, transport and offload furniture, materials and equipment. + Receive and maintain items in the Warehouse + Restock custodial and furnishing items + Manual labor as required (packing, unpacking, shelving) + Receive, store, and sort unserviceable equipment and supplies for disposal. + Move or transports materiel or supplies to other departments, using Pallet Jack, Forklift or industrial truck + Performs other duties and assignments as required. Qualifications + Minimum Qualifications + Must hold a Qatar-issued driving license (Minimum: Medium Truck) + Education/Certifications: + High School Diploma required + Must have and maintain a local driver’s license for all required vehicles and equipment. + Has two (2) years’ experience as a Medium or Heavy truck driver. + Program Specific Requirements: + Read, write and understand English + Assist customer Logistic Specialist with inventory management reconciliation + Experience: + 5 years' experience operating vehicles and forklifts in an industrial or commercial environment + Skills: + Must be highly proficient and licensed + Must be able to read, write and speak English clearly + Working Environment: + The worker is subject to both environmental conditions. Activities occur inside and outside. + The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

Additional Information<br><br>Job Number 26119894<br><br>Job Category Engineering & Facilities<br><br>Location Ras Abu Abboud Street, Doha, Qatar, Qatar, 26662VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>Бренд The Ritz-Carlton – это более 100 расположенных по всему миру отелей, получивших всеобщее признание. Мы обслуживаем гостей наших отелей на таком высоком уровне, что они остаются под впечатлением еще долгое время после отъезда. У нас работают лучшие в мире специалисты гостиничной отрасли, которые делают все, чтобы гости получали максимум удовольствия от пребывания у нас. Мы считаем, что в нашем бизнесе успех сопутствует тому, кто может проявлять свои творческие способности, вдумчиво работать и быть отзывчивым.<br><br>Каждый день мы задаем стандарты качества уникальных услуг для всего мира и по праву гордимся тем, что можем обеспечить для наших гостей услуги и удобства высочайшего уровня.<br><br>Вы должны будете проявлять все свое внимание, чтобы обеспечивать повседневное соблюдение «Золотых стандартов» The Ritz-Carlton. Золотые стандарты – это основа деятельности The Ritz-Carlton и то, что помогает нам становиться лучше с каждым днем. Эти стандарты укрепляют нашу веру в то, что культура бренда лежит в основе успеха, который помог The Ritz-Carlton стать мировым лидером среди сетей элитных отелей. Став членом нашего коллектива, вы освоите и будете демонстрировать на самом высоком уровне такие «Золотые стандарты», как «Обязательства сотрудников», «Кредо» и «Ценности обслуживания». А мы обязуемся дать вам возможность гордиться работой, которую вы будете выполнять, и людьми, с которыми вы будете работать.<br><br>Выбрав работу в The Ritz-Carlton, вы станете частью коллектива одного из брендов Marriott International. Делайте то, что у вас получается лучше всего, начните движение к своей цели, присоединитесь к удивительной глобальной команде и измените свою жизнь к лучшему.

Additional Information<br><br>Job Number 26119894<br><br>Job Category Engineering & Facilities<br><br>Location Ras Abu Abboud Street, Doha, Qatar, Qatar, 26662VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br><br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br><br>Preferred Qualifications<br><br>Education: High school diploma or G. E. D equivalent.<br><br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br><br>Experience in hotel engineering or maintenance a plus.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: Driver’s License<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>Com mais de 100 hotéis premiados pelo mundo, o Ritz-Carlton Ladies and Gentlemen cria experiências excepcionais que acompanham os hóspedes muito após a estadia. Atraindo os melhores profissionais de hotelaria do mundo, que selecionam memórias duradouras, acreditamos que todo mundo alcança o sucesso quando tem a possibilidade de exercer criatividade, gentileza e compaixão.<br><br>Todos os dias, estabelecemos o padrão para um serviço de luxo especial prestado em todo o mundo, nos orgulhando de proporcionar excelência nos cuidados e no conforto de nossos hóspedes.<br><br>Seu papel será o de assegurar que os “padrões ouro” do The Ritz-Carlton sejam atendidos com a maior elegância e cuidado todos os dias. Estes padrões são a base do The Ritz-Carlton e nos orientam a melhorar a cada dia. Eles servem como fundação, e nossa crença na cultura interna que leva ao sucesso que rendeu a reputação do The Ritz Carlton como líder global em hotelaria de luxo. Como parte do nosso time, você aprenderá e demonstrará estes padrões ouro, que incluem nossa promessa para com os funcionários, nossa crença fundamental e nosso valores de atendimento. Nossa promessa para você é que oferecemos a chance de ter orgulho do seu trabalho e de quem trabalha com você.<br><br>Ao entrar para o The Ritz-Carlton, você se junta a um portfólio de marcas da Marriott International. Esteja onde pode realizar seu melhor trabalho, agir conforme seu propósito, fazer parte de uma incrível equipe global e se tornar a melhor versão de quem você é.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-43835&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Senior Static Equipment Engineer M/F</p><br><br> Contract type <p>Temporary work contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>60 months</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy, Qatar for a</p><br><br><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Senior Static Equipment Engineer</p><br><br><br><p>The Senior Static Equipment Engineer leads static equipment engineering for capital projects across the Ammonia and Urea Complex, including pressure vessels, heat exchangers, reformer furnace and tubes, and high-pressure urea/carbamate equipment, from concept and feasibility through FEED, detailed design, and procurement of new equipment. The role-holder is required to promote, follow, and ensure fulfillment of the relevant requirements of the Company's Occupational Health &amp; Safety, Environment, Quality, Process Safety, and Information Security standards throughout all project phases to guarantee the technical integrity, long-term asset reliability, and safe execution of QAFCO's capital developments</p><br><br><p><strong>Key Responsibilities</strong></p><br><br><p><strong>Project Development &amp; Concept Design</strong></p><br><br><ul><li>Lead static equipment sizing and selection studies during concept and feasibility phases.<br>• Develop static equipment design philosophy for new units and modification projects, ensuring all designs comply with international codes, process requirements, and QAFCO engineering standards.<br>• Promote innovative solutions in static equipment specifications to corporate sustainability goals.<br>• Provide advanced technical expertise and problem-solving support during equipment fabrication, inspection, testing and commissioning to resolve structural or material anomalies and prevent future operational defects.</li></ul><p><strong>FEED Development</strong></p><br><br><p>• Develop static equipment lists, design basis, and preliminary datasheets during FEED.<br>• Review licensor and contractor static equipment design packages for technical compliance.</p><br><br><p><strong>Detailed Engineering &amp; Execution Support</strong></p><br><br><p>Review detailed static equipment design, calculations, and drawings during EPC execution.<br>• Resolve technical queries related to static equipment design, materials, and fabrication.<br>• Review vendor design calculations, material certificates, and inspection/test plans during fabrication.<br>• Participate actively in cross-functional project safety reviews, including HAZOP, SIL, and Process Safety Management (PSM) assessments, to identify, mitigate, and eliminate potential design hazards related to static equipment.</p><br><br><p><strong>Procurement Support &amp; Technical Bid Evaluation</strong></p><br><br><p>Prepare and review static equipment technical specifications, datasheets and requisition package for pressure vessels, tanks, heat exchangers, columns, reactors, filters, and any pressure equipment.<br>• Manage the technical evaluation of vendor bids and clarify complex engineering queries during the procurement phase to ensure only technically qualified suppliers are selected verifying compliance with ASME/API codes and Company specifications</p><br><br> <br> Profile <br><p>Bachelor’s degree in mechanical engineering or equivalent. 8-12 years of static equipment engineering, preferably in ammonia and urea projects, including new equipment specification, technical bid evaluation, and vendor design review. API 510/570/653 certification is preferred. Strong knowledge of ASME Section VIII and project procurement processes and familiarity with engineering software (e.g., AutoCAD, PV Elite, CAESAR II)</p><br><br><p>SME-level expertise in static equipment reliability, inspection, and integrity management</p><br><br><p>You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office</p><br><br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities</p><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> Messaid , Qatar <br>Candidate criteria Minimum level of experience required <p>10 years or more</p><br><br> Required authorisations <br><p>Mechanical Engineer under QAFCO Ops Tier-1 Manpower Contract (REQ-016)</p><br><br> <br> Languages <p>English (C-Professional working proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities</p><br><br> <br> <br><br> </div>

Job Summary<br><br>We are looking for an experienced Workshop Manager to oversee the day-to-day operations of an industrial workshop, ensuring efficient production, maintenance, manpower utilization, quality, safety, and timely completion of workshop activities. The ideal candidate should have a strong background in fabrication, mechanical works, piping, equipment maintenance, and workshop management, preferably within the Oil & Gas, EPC, or industrial sector.<br><br>Key Responsibilities<br><br>Manage and supervise all daily workshop activities, including fabrication, Mechanical, piping, welding, assembly, and repair works. Plan and allocate manpower, equipment, tools, and materials according to project requirements. Monitor workshop production schedules and ensure timely completion of assigned works. Coordinate with Project Managers, Engineers, Supervisors, QA/QC, HSE, Procurement, and Stores teams. Review drawings, specifications, work orders, and project requirements before commencing workshop activities. Ensure proper utilization and maintenance of workshop machinery, equipment, tools, and facilities. Monitor fabrication and assembly activities to ensure compliance with approved drawings and specifications. Ensure all workshop activities are carried out in accordance with approved procedures, quality standards, and project specifications. Coordinate with QA/QC teams for inspections, testing, documentation, and final acceptance. Ensure strict compliance with company HSE policies and applicable Oil & Gas safety standards. Conduct toolbox meetings and ensure workers follow safe working practices and PPE requirements. Monitor productivity, manpower performance, material consumption, and workshop costs. Identify operational issues and implement corrective actions to improve productivity and efficiency. Coordinate material requirements with the Stores and Procurement departments. Maintain proper records of production, manpower, equipment utilization, material usage, and workshop progress. Prepare regular progress reports and provide updates to management. Supervise and develop workshop supervisors, foremen, technicians, welders, fabricators, fitters, and other personnel. Ensure preventive maintenance of workshop machinery and equipment is carried out as scheduled. Support project execution teams during mobilization, fabrication, installation, shutdown, and maintenance activities as required. Ensure compliance with applicable ASME, API, AWS, ISO, and client/project standards, where applicable.<br><br>Required Qualifications<br><br>Bachelor’s Degree or Diploma in Mechanical Engineering. Minimum 10 years of relevant workshop experience. Previous GCC experience is mandatory, preferably in Qatar. Strong knowledge of workshop planning, fabrication processes, manpower management, and equipment utilization. Good understanding of QA/QC and HSE requirements in industrial and Oil & Gas environments. Ability to read and understand engineering drawings, fabrication drawings, specifications, and project documents. Strong leadership, communication, coordination, and problem-solving skills. Proficiency in MS Office and relevant workshop/project management systems. Ability to manage multiple activities and meet strict project deadlines.

<p>Educational Qualifications:</p><ul><li><p>Bachelor’s Degree in Mechanical Engineering from a recognized university.</p></li></ul><p>Registrations / Certifications:</p><ul><li><p>UPDA/MMUP Certified Mechanical Engineer Grade A (Mandatory)</p></li><li><p>QCDD Approved</p></li><li><p>Other certification like NFPA, ASHRAE, LEED/ESTIDAMA</p></li></ul><p>Experience:</p><ul><li><p>10 to 15 years of experience in mechanical system design for High rise commercial,</p></li></ul><p>residential & hospitality building.</p><ul><li><p>Minimum 8-10 years of GCC experience.</p></li><li><p>Strong technical background in HVAC, plumbing, drainage, and firefighting system</p></li></ul><p>design in accordance with international and local authority standards (QCDD &</p><p>Kahramaa, etc.).</p><p>Computer Software Proficiency:</p><ul><li><p>Proficient in AutoCAD, Revit MEP, and Microsoft Office.</p></li><li><p>Knowledge of design software such as HAP, Elite,</p></li><li><p>Familiar with BIM coordination tools</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Duties & Responsibilities:</p><ul><li><p>Develop mechanical designs including HVAC, plumbing, drainage, and firefighting</p></li></ul><p>systems based on project specifications and applicable codes.</p><ul><li><p>Perform load calculations using design software (HAP or equivalent) and determine</p></li></ul><p>equipment capacities and duct/piping sizes.</p><ul><li><p>Identify design and constructability issues and raise RFIs.</p></li><li><p>Prepare design drawings, schematics, and single-line diagrams for all mechanical</p></li></ul><p>systems in coordination with architectural and structural layouts.</p><ul><li><p>Review design drawings and specifications to ensure compliance with project and</p></li></ul><p>authority standards (ASHRAE, SMACNA, NFPA, CIBSE).</p><ul><li><p>Select and specify HVAC and plumbing equipment including chillers, FAHUs, AHUs,</p></li></ul><p>FCUs, pumps, valves, and control devices.</p><ul><li><p>Prepare BOQs, technical specifications, and design reports.</p></li><li><p>Coordinate with consultants, clients, and other disciplines (electrical, civil, architectural)</p></li></ul><p>to resolve technical issues and ensure proper integration of services.</p><ul><li><p>Prepare shop drawings to ensure compliance with approved design intent and authority</p></li></ul><p>requirements.</p><ul><li><p>Liaise with local authorities (QCDD & Kahramaa, etc.) for design approvals, NOCs,</p></li></ul><p>and compliance verification.</p><ul><li><p>Able to identify the Value Engineering & cost saving opportunities.</p></li><li><p>Participate in BIM coordination meetings and ensure mechanical services are properly</p></li></ul><p>routed and clash-free.</p><p>DESIGN ENGINEER MECHANICAL</p><ul><li><p>Support the QA/QC team in reviewing inspection and testing procedures from a design</p></li></ul><p>compliance perspective.</p><ul><li><p>Ensure all designs are properly documented, updated, and controlled according to ISO</p></li></ul><p>quality procedures.</p><ul><li><p>Prepare as-built documentation and final design reports for project handover.</p></li><li><p>Assist in commissioning plan preparation and system performance validation as per</p></li></ul><p>design criteria.</p><ul><li><p>Maintain up-to-date knowledge of authority regulations, energy efficiency requirements,</p></li></ul><p>and new design technologies.</p><p>Availability to Join:</p><ul><li><p>Immediate or within 30 days.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Additional Qualifications:</p><p>&nbsp; Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS’s and PDN’s.</p><p>&nbsp; Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>&nbsp; Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>&nbsp; Provide tuning for controls and equipment.</p><p>&nbsp; Test equipment and controls after maintenance has been done.</p><p>&nbsp; Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>&nbsp; Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>&nbsp; Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool’s standards.</p><p>&nbsp; May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

Job Description: HSE Officer – Road/Highway Projects Salary - 3500/- 5000/- Riyal Location - Doha Duration - permanent job Industry: Road Construction / Highway Infrastructure Experience: 3–5 years in HSE, preferably in road/highway construction projects Qualification: Diploma/Degree in Engineering, Safety, Environmental Science, or related field Certification: NEBOSH IGC required; IOSH/OSHA or equivalent certification will be an advantage<br>Key Responsibilities:Implement and monitor HSE policies, procedures, and safety standards at road/highway project sites. Conduct daily site inspections, toolbox talks, safety briefings, and risk assessments. Monitor traffic management, road diversions, barricading, signage, and work-zone safety. Ensure safe working practices for excavation, earthwork, asphalt/paving, equipment operation, lifting, and other construction activities. Identify hazards and implement appropriate control measures. Investigate accidents, near misses, and unsafe conditions and prepare reports. Ensure compliance with applicable HSE regulations, client requirements, and project safety procedures. Monitor PPE compliance and safe use of construction machinery and vehicles. Coordinate emergency response drills and maintain emergency preparedness. Maintain HSE records, inspection reports, incident statistics, permits, and training documentation. Conduct regular safety training and induction programs for workers and subcontractors. Stop unsafe work where there is an immediate risk to personnel, equipment, or the public. Assist management in achieving project HSE targets and maintaining a strong safety culture. Required Skills Good knowledge of road/highway construction safety practices. Strong understanding of risk assessment and hazard identification. Knowledge of traffic management and work-zone safety. Good communication and reporting skills. Ability to work independently at a construction site. Proficiency in MS Office and preparation of HSE reports. Strong knowledge of PPE, permit-to-work systems, emergency procedures, and incidentinvestigation.<br>Preferred Profile NEBOSH IGC certification is mandatory/preferred.3–5 years of relevant HSE experience, with significant exposure to road/highway projects. Experience with contractors, subcontractors, heavy equipment, and workforce safety. Candidates with experience on major infrastructure/highway projects will be preferred.