Glass Technician Jobs in Qatar

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as: Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc. Maintain preventively all air-conditioning and refrigeration systems within the hotel Check on performance of refrigeration systems and components Verify all door closing systems on walk in coolers / freezer (door gaskets / latches) Check and maintain all defrosting systems and automation of ice makers Work on maintenance requests from all departments Ensure routine cleaning of fan coil units and air-handling unit filters Check on performance of air-conditioning and chill water systems Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up Strict control on venting of CFC’s to atmosphere Overhauling of air-condition / refrigeration equipment and systems Check all refrigeration and oil levels and control of major repairs Cooperate and inform Engineering Storekeeper on purchase of parts Carry out all works as per the country technical regulations and safety standards<br><br>Qualifications<br><br>Must have the appropriate documented training from a technical/vocational institute. One year operating experience in a hotel engineering department. Must be able to read and interpret blueprints and electrical schematics. VRF/VRV system experience is a plus. <br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44400&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Instrumentation Assistant Technician M/F</p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>28 Months</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy Doha&nbsp;for a:</p><br><br><p>Instrumentation Assistant Technician - Male</p><br><br><p>Number of Position: 01</p><br><br><p>Job Purpose:</p><br><br><p>This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with&nbsp; QatarEnergy in which the Project on its tenth year multi&nbsp;discipline tasks in Maintenance and Operation of large Industrial Area</p><br><br><p>Client satisfaction concluded by&nbsp;a new project contract awards with new Positions added.</p><br><br><p>The candidate shall be responsible for:</p><br><br><p>01. Operation and maintenance of complete Instrumentation Systems, which includes supervision, planning and scheduling, inspection.</p><br><br><p>02. Hands-on experience in all type of Instrumentation system equipment, and Control system maintenance.</p><br><br><br><p>03. Maintenance of DCS, burner management system, Smart field transmitters, fields instruments such as flow meters, level transmitters, motorized valves, temperatures transmitters, solenoid valves, PLCs, scada, traffic light system, vibration monitoring system, fire and gas system,</p><br><br><p>06. Maintenance of&nbsp;on-line analysers, salinity, free chlorine, chromophyll and TOC analysers,&nbsp;</p><br><br><p>07.&nbsp;familiarity with various types of detectors and sensors used for fire and gas detection,</p><br><br><p>08. Hands-on experience in working with Work Permit system Oil &amp; Gas Industry.</p><br><br><p>10. Draws attention to his ability to manage a repair department, perform preventative work, and follow safety protocols.</p><br><br><p>11. The candidate concludes with important abilities including Safe work culture and practices.&nbsp;</p><br><br><br> <br> Profile <br><p>Ideally you will have Trade Certificate in Electronics / Instrumentation or higher<br>&nbsp;</p><br><br><p>With a minimum experience of 03 Years in Oil and Gas or petrochemical industry or in similar system / facility&nbsp;or equivalent.</p><br><br><p>Shall be familiar with different Instrumentation systems, equipment and component with its fittings and material specifications.</p><br><br><p>Shall be capable to trouble shoot, maintain, repair the different electrical system, equipment and components</p><br><br><p>&nbsp;Experience required in:</p><br><br><p>DCS, burner management system, Smart field transmitters, fields instruments such as flow meters, level transmitters, motorized valves, temperatures transmitters, solenoid valves, PLCs, scada, traffic light system, vibration monitoring system, fire and gas system, on-line analysers, salinity, free chlorine, chromophyll and TOC analysers,&nbsp;detectors and sensors used for fire and gas detection,</p><br><br><p>&nbsp;Familiar with hand tools, fasteners and other similar equipment.</p><br><br><p>You will have good interpersonal and organizational skills,</p><br><br><p>The candidate starts with general skills like repairing and maintaining equipment, running diagnostics, and identifying problems.</p><br><br><p>The candidate concludes with important abilities including documentation and communication.</p><br><br><p>Written communication,&nbsp;Active listening,&nbsp;Verbal communication, editing.</p><br><br><p>Organization,&nbsp;Time management,&nbsp;Attention to detail,&nbsp;Problem-solving,&nbsp;</p><br><br><p>Computer literacy&nbsp;essential and familiarity with MS Office 2000 packages.</p><br><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> Ras Laffan Industrial City <br>Candidate criteria Minimum level of experience required <p>3 years or more</p><br><br> Required authorisations <br><p>Trade Certificate in Instrumentation / Control / Electronics /&nbsp;Communication or equivalent</p><br><br><p>Maintenance works hands on experience</p><br><br><p>03 years experience, in Oil and Gas or petrochemical industry or marine industry or in similar system / facility</p><br><br> <br> Languages <p>English (D-Full professional proficiency)</p><br><br>Our ambition Combining our differences <br><p>NA</p><br><br> <br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44399&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Instrumentation Technician M/F</p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>28 Months</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy Doha&nbsp;for a:</p><br><br><p>Instrumentation Technician&nbsp;</p><br><br><p>Job Purpose:</p><br><br><p>This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with&nbsp; QatarEnergy in which the Project on its tenth year multi&nbsp;discipline tasks in Maintenance and Operation of large Industrial Area</p><br><br><p>Client satisfaction concluded by&nbsp;a new project contract awards with new Positions added.</p><br><br><p>The candidate shall be responsible for:</p><br><br><p>01. Operation and maintenance of complete Instrumentation Systems, which includes supervision, planning and scheduling, inspection.</p><br><br><p>02. Hands-on experience in all type of Instrumentation system equipment, and Control system maintenance.</p><br><br><p>&nbsp;03. Maintenance of DCS, burner management system, Smart field transmitters, fields instruments such as flow meters, level transmitters, motorized valves, temperatures transmitters, solenoid valves, PLCs, scada, traffic light system, vibration monitoring system, fire and gas system,</p><br><br><p>06. Maintenance of&nbsp;on-line analysers, salinity, free chlorine, chromophyll and TOC analysers,&nbsp;</p><br><br><p>07.&nbsp;familiarity with various types of detectors and sensors used for fire and gas detection,</p><br><br><p>08. Hands-on experience in working with Work Permit system Oil &amp; Gas Industry.</p><br><br><p>10. Draws attention to his ability to manage a repair department, perform preventative work, and follow safety protocols.</p><br><br><p>11. The candidate concludes with important abilities including Safe work culture and practices.&nbsp;</p><br><br><br> <br> Profile <br><p>Ideally you will have Trade Certificate in Electronics / Instrumentation or higher<br>&nbsp;</p><br><br><p>With a minimum experience of 03 Years in Oil and Gas or petrochemical industry or in similar system / facility&nbsp;or equivalent.</p><br><br><p>Shall be familiar with different Instrumentation systems, equipment and component with its fittings and material specifications.</p><br><br><p>Shall be capable to trouble shoot, maintain, repair the different electrical system, equipment and components</p><br><br><p>&nbsp;Experience required in:</p><br><br><p>DCS, burner management system, Smart field transmitters, fields instruments such as flow meters, level transmitters, motorized valves, temperatures transmitters, solenoid valves, PLCs, scada, traffic light system, vibration monitoring system, fire and gas system, on-line analysers, salinity, free chlorine, chromophyll and TOC analysers,&nbsp;detectors and sensors used for fire and gas detection,</p><br><br><p>&nbsp;Familiar with hand tools, fasteners and other similar equipment.</p><br><br><p>You will have good interpersonal and organizational skills,</p><br><br><p>The candidate starts with general skills like repairing and maintaining equipment, running diagnostics, and identifying problems.</p><br><br><p>The candidate concludes with important abilities including documentation and communication.</p><br><br><p>Written communication,&nbsp;Active listening,&nbsp;Verbal communication, editing.</p><br><br><p>Organization,&nbsp;Time management,&nbsp;Attention to detail,&nbsp;Problem-solving,&nbsp;</p><br><br><p>Computer literacy&nbsp;essential and familiarity with MS Office 2000 packages.</p><br><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> Ras Laffan Industrial City <br>Candidate criteria Minimum level of experience required <p>6 years or more</p><br><br> Required authorisations <br><p>Diploma&nbsp;in Instrumentation / Control / Electronics /&nbsp;Communication or equivalent</p><br><br><p>Maintenance works hands on experience</p><br><br><p>06 years experience, in Oil and Gas or petrochemical industry or marine industry or in similar system / facility</p><br><br> <br> Languages <p>English (D-Full professional proficiency)</p><br><br>Our ambition Combining our differences <br><p>NA</p><br><br> <br> <br><br> </div>

As the Industrial Control Systems (ICS) Technician, you will be responsible for the maintenance, troubleshooting, and optimization of industrial control systems, ensuring efficient, safe, and reliable operation of HVAC and associated critical infrastructure systems.<br><br>Essential Job Functions<br><br>Install, maintain, and troubleshoot Industrial Control Systems (ICS) for HVAC and related building automation systems. Monitor, calibrate, and optimize HVAC control systems to maintain optimal performance and energy efficiency. Diagnose and repair electrical, mechanical, and software-related issues in control panels, PLCs, sensors, actuators, and other ICS components. Perform routine preventive maintenance on control systems and HVAC equipment to ensure compliance with operational standards. Collaborate with engineering teams to implement system upgrades, modifications, and enhancements. Document all maintenance, repairs, and system changes accurately in accordance with organizational and regulatory requirements. Ensure compliance with safety standards, including electrical, mechanical, and industrial safety protocols. Provide technical support and guidance to junior technicians and operations personnel.<br><br>Education & Experience<br><br>High School Diploma or equivalent Minimum of five (5) years of experience specializing in ICSOperator Training in Building Automation Systems. Proven experience with HVAC control systems, building automation systems, and industrial control systems (PLC, DCS, SCADA). Strong knowledge of electrical circuits, sensors, actuators, and control panel components. Hands-on experience with troubleshooting and repairing ICS equipment. Familiarity with safety and quality standards in industrial and military facilities is a plus. Ability to read and interpret schematics, diagrams, and technical manuals. Strong problem-solving, analytical, and communication skills.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apache Mechanical Technician (Avionics)</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Qatar Incorporated<br><br><p><b>Job Description:</b></p><br><br><p>Boeing Global Service is seeking an <b>Apache Mechanical Technicians (Avionics)</b> to join the AH-64E Qatar Air Force Maintenance Augmentation Team (MAT) located at <b>Al Udeid Air Base, Qatar</b>.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>Performs maintenance on the AH-64E electrical/avionics/armament/fire control/radar/visionics/ASE systems and components associated with the QAF AH-64E using the QAF-specific AH-64E IETM, AH-64E Operators Manual, AH-64E Maintenance Test Flight Manual, and AH-64E Check List Manual.</p><br><br></li><li><p>Diagnoses and repairs aircraft systems and components malfunctions including solid state and transistorized devices according to the appropriate technical manuals, directives and safety procedures.</p><br><br></li><li><p>Performs scheduled and unscheduled aircraft maintenance actions, authorized modifications and alignment of AH-64E weapons components, fire control/radar units, sighting elements/visionics, ASE, electronic and mechanical devices, and instruments.</p><br><br></li><li><p>Uses common measuring tools necessary for performing the tasks described herein, precision measuring tools and alignment fixtures. Handles AH-64E aircraft ammunitions, performs weapon system loading/unloading, arming and de-arming, and weapon subsystems configuration changes for all AH-64E weapons and fire control systems within the scope of this SOW.</p><br><br></li><li><p>Performs aircraft systems operational checks.</p><br><br></li><li><p>Test, troubleshoots, and repair aircraft systems test sets and diagnostic equipment.</p><br><br></li><li><p>Assist the QAF in the requisition and maintenance of Shop and Bench stock items for repair of AH-64E armament, ASE, electrical, avionics, instrument, fire control, radar and visionic systems.</p><br><br></li><li><p>Prepares aircraft for inspections and maintenance checks.</p><br><br></li><li><p>Diagnoses and solves problems aircraft subsystems using special tools and equipment as required.</p><br><br></li><li><p>Uses and performs operator maintenance on tools, special tools, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</p><br><br></li><li><p>Prepares aircraft maintenance forms and records. Provide OJT, coaching, and mentorship to the QAF personnel in the use of all applicable technical publications, tools, test equipment, AGSE, PGSE, and special equipment applicable to the subject area of aircraft maintenance, enabling them to become effective AH-64E Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Coordinates training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li><li><p>Travel on short notice.</p><br><br></li><li><p>Travel both domestically and internationally.</p><br><br></li></ul><br><p><b>This position is expected to be 100% onsite.&nbsp;The selected candidate will be required to work onsite at Al Udeid Air Base, Qatar.</b></p><br><br><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>5+ years of experience with the AH/64 D/E aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technician.</p><br><br></li><li><p>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) or a similar aviation maintenance management system.</p><br><br></li><li><p>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft avionics/armament/fire control/ASE maintenance course or civilian equivalent training. Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or his/her designated representative and/or the GFR as substitute.</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>3+ years ULLS-A(E) or a similar aviation maintenance management system.</p><br><br></li><li><p>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Prior experience or qualified in another aviation maintenance field.</p><br><br></li><li><p>Prior experience working in the Southwest Asia/desert region.</p><br><br></li></ul><br><p>At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.&nbsp; Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.&nbsp;&nbsp;</p><br><br><p>The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.&nbsp;&nbsp;</p><br><br><p>The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.</p><br><br><br><p><b>This requisition is for an international, locally hired position in Al-Udeid, Qatar. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Qatari law. Employment is subject to the candidate's ability to satisfy all Qatari labor and immigration formalities.</b></p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position does not require a Security Clearance.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Qatar)<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Carries out skilled fault-finding, repair, installation, maintenance and overhaul work on a range of pneumatic, electrical and electronic instrumentation and Control/Plant Safety System, in workshop and on-site.</li> <li>Assists in routine aspects of work and complete records and forms, detailing work carried out, in either of the NGL Plants, North Field Facilities, NGL/Storage &amp; Loading Areas within NGL Complex.</li> </ul><br><ul> <li>Carries out faultfinding, repair, installation, maintenance, modification and overhaul work on a range of Process Control/Safety Instrumentation System in any Oil &amp; Gas processing plant and Storage &amp; Loading facilities</li> <li>Carries out skilled fault-finding, repair, maintenance, installation, testing, calibration, loop checking, overhauls on a range of pneumatic, hydraulic, electrical, electronic control and safety</li> <li>instrumentation systems, process analyzers, DCS, ESD, F&amp;G, SCADA, PLC, Rotating Equipment</li> <li>controls, vibration monitoring system, Loading arms controls, Tank gauging and inventory management system, custody meters, Flare ignition controls &amp; flame monitoring and various flare flow meters in oil and gas industry.</li> <li>Shall be responsible for obtaining or issuing appropriate Hot or Cold Work Permits and other Certificates as necessary.</li> <li>Maintenance of Plant fire &amp;gas detection and protection systems such as flammable &amp; toxic gas sensors, Tank Rim-seal fire detection &amp; protection systems, plant deluge &amp; foam systems, Firewater pump controls, fire alarm systems.</li> <li>To complete records of work performed and reports details of installation, workshop overhaul and repair, preventative maintenance, and fault-finding/repair work carried out to Senior Technician.</li> <li>Includes completing instrument calibration test sheets, service records and log registers.</li> <li>Interpret/mark-up technical drawings.</li> <li>To serve on standby duty to attend to urgent instrument problems outside working hours.</li> <li>Test equipment calibration and maintenance, exercising good housekeeping in all activities and observing all fire and safety precautions.</li> <li>Fully conversant with Permit to work system &amp; shall have Level 1/2 authorization.</li> </ul><br><ul> <li>Completion of Secondary (12 years) education, followed by Higher National Certificate or equivalent. In addition, relevant short courses in safety. Fair knowledge of computer and networking.</li> <li>A minimum of 5 years' Relevant Maintenance Experience in Oil &amp; Gas or Petrochemical industry.</li> <li>Experience in the installation, maintenance and overhaul of pneumatic, electrical and electronic process control and safety instrumentation within a hydrocarbon/oil refinery or gas processing plant.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position:</p><p>Chiller Technician - (2)</p><p>Date Open:</p><p>Feb 19, 2026</p><p>Closing Date:</p><p>Apr 30, 2026</p><p>Principal:</p><p>Qatar District Cooling Company</p><p>Country:</p><p>Doha, Qatar</p><p>Qualifications:</p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>&nbsp;Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><p>Chillers</p><p>Process Area of FCU, AHU, and Ventilation System</p><p>Refrigerant recovery, recycling and purifying System</p><p>&nbsp; On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>&nbsp; Supervise, guide and monitor work done by external vendors.</p><p>&nbsp; Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>&nbsp; Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>&nbsp; Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>&nbsp; Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>&nbsp; Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>&nbsp; Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>&nbsp; Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>&nbsp;Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>&nbsp; Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>&nbsp; Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>&nbsp; Utilize, maintain and safe keep specific tools assigned by company.</p><p>&nbsp; Maintain proper tools, PPE’s, Spares and provide annual requirements.</p><p>&nbsp; Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>&nbsp; Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>&nbsp; Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>&nbsp; Where applicable, provide assistance and support to other team members, whenever required.</p><p>&nbsp; Participate in QC provided training as deemed fit by management.</p><p>&nbsp; Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>&nbsp; Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>Minimum of 5 years working experience is required for this position</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li><li>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</li></ul><p></p></section>

Overview<br><br>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards.<br><br>Your role<br><br>Install, test, commission, maintain, and repair HVAC systems including:Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split & packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.<br>About You<br><br>Qualifications & Experience<br><br>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration & Air Conditioning, or equivalent. Minimum 3–7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE – preferred).<br><br>Skills & Competencies<br><br>HVAC installation, testing & commissioning. Preventive & breakdown maintenance. Fault diagnosis & troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical & control panel knowledge. Good communication and teamwork skills.<br><br>Rewards & benefits<br><br>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.<br><br>This Includes<br><br>Tax-free salary. Life insurance coverage. Medical insurance. Annual leave balance. Company gratuity scheme. Discretionary bonus program. Annual flight contribution. Transportation & housing allowances. Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.<br><br>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.<br><br>About Atkins Réalis<br><br>We're Atkins Réalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.<br><br>Find out more.

Job description:<br><br>JOB PURPOSE:Perform maintenance repairs and services on mechanical machinery, and equipment to ensure efficient operation and reduce production down time for both simple and combined cycle Power Generation blocks and Balance of Plant. KEY ACCOUNTABILITIES:Repairs and maintains efficiently a wide range of mechanical equipment and systems in power plant. Attends preventive, corrective and breakdown maintenance repairs, with minimum direction and supervision, (including “on call” duties, as and when required), restores the mechanical systems, as quickly as possible. Assists Technician Engineers or attends independently the jobs allocated with clear understanding of relevant methods and procedures including associated risks and selects the required tools and equipment to complete such works in a safe and effective manner. Carries out maintenance works in adherence with EHS standards and plant operating requirements, to minimise workplace accidents / inquiries. Monitors any repeated breakdown and suggests and implements proper resolutions to avoid reoccurrence of similar problems. Directs contract workforce to carry out maintenance repairs and services, in line with the agreed plans. Probability of significant exposure in various degrees to physical & sensory conditions inherent in the work environment, high pressure steam, high voltage, Arc Flash, high magnetic fields, high noise levels, Fumes, Hot, Humid, Dust, Height, splash of chemicals, Acid, Mineral oil and liquids is significant and avoiding risk of danger, accident or health issues becomes major challenges. Accepts direction from his supervisor verbally or in writing. QUALIFICATIONS & SKILLS:Minimum Qualifications:Diploma in Mechanical Engineering or Craft /Trade certificate or equivalent qualification Minimum Experience:Diploma Holder: 5 years’ experience in a similar position (in a thermal Power plant) Craft /Trade certificate holders: 8 years’ experience in mechanical maintenance Hands-on experience on GE Frame 9E/9FA Gas Turbines, steam Turbines, Waste heat boilers, thermal desalination and other BOP equipment overhauls Skills:Familiar with all mechanical maintenance tools Knowledge of PCs, Computer literacy is essential Conversant in Gas Turbine, Steam Turbine, Waste heat Boilers, Compressors, Pumps, Cooling Towers and Reverse Osmosis Plant Speak, read and write English to a good standard Excellent interpersonal skills and assertiveness Team work (including shift work is also essential) Self-motivation & dedication Work in a Multi-Cultural environment

Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Support Expansion Project Mechanical activities for pre-commissioning, commissioning, preservation and start-up tasks and conduct Mechanical field maintenance activities safely, including preventive, predictive and breakdown maintenance to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities). Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Perform preventive and corrective maintenance work on field Mechanical equipment as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of Mechanical field issues, as directed and guided by Foreman/Supervisor and issues timely reports. Review the Piping & Instrument Diagram and Drawings (P&IDs,) loop drawings, hook-up drawings, Mechanical Index, Mechanical datasheets, logic diagrams and other documents required to tackle issues related to Mechanical field. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in Regular Toolbox meeting with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe and observation cards Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas or Petrochemical industry Technical and Business Skills Extensive experience in the operation, maintenance and condition monitoring of Mechanical equipment eg: turbines, pumps, compressors, valves, exchangers, vessels and associated equipment. Good written and oral communication skills in English. Good adaptability to multinational environment, with wide exposure to various cultures and customs. Computer literate with basic knowledge in MS Office software

Job Requisition ID: 180649<br><br>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.<br><br>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day<br><br>Overview Of The Role<br><br>As a Technician, you will be responsible for carrying out servicing, preventive maintenance, diagnostics, troubleshooting, and repairs on Volvo trucks and buses in line with Volvo manufacturer standards, DOMASCO procedures, and workshop safety requirements. You will play an important part in ensuring vehicles are repaired correctly, safely, and within the agreed timelines, while supporting high customer satisfaction and workshop productivity.<br><br>What You Will Do<br><br> Perform servicing, preventive maintenance, inspections, diagnostics, and repairs of Volvo trucks and buses according to manufacturer and dealer/distributor standards. Diagnose and rectify mechanical, electrical, electronic, hydraulic, and pneumatic faults using approved diagnostic procedures and equipment. Complete assigned jobs within the specified repair time and agreed service schedule while maintaining high-quality workmanship. Strictly follow Volvo technical specifications, repair procedures, Workshop Service Manuals, technical instructions, and guidance from the Workshop Supervisor/Work In-Charge. Read and interpret electrical, hydraulic, pneumatic, and mechanical schematics accurately. Effectively use Volvo-approved diagnostic tools, technical systems, service manuals, and other workshop equipment. Conduct systematic troubleshooting and root-cause analysis to identify and rectify vehicle faults efficiently. Carry out required testing, calibration, programming, and adjustments using approved Volvo diagnostic equipment. Perform quality checks after completing repairs to ensure the vehicle is safe, reliable, and ready for delivery. Identify additional faults or repair requirements during inspection and communicate them to the Workshop Supervisor/Service Advisor. Maintain accurate job card records, including fault findings, diagnostic results, repairs performed, and parts replaced. Follow warranty procedures and ensure all warranty repair documentation is completed accurately. Maintain tools, equipment, and work areas in good condition and ensure proper housekeeping within the workshop. Follow all company HSE policies, workshop safety procedures, and safe working practices. Minimize repeat repairs and comebacks by applying correct diagnostic and repair procedures. Complete assigned Volvo technical training and e-learning within the required timelines. Support other technicians and workshop team members when required and contribute to continuous technical improvement. Maintain professional conduct and effective communication with supervisors, colleagues, and other departments. Contribute to achieving workshop targets related to productivity, efficiency, quality, turnaround time, and customer satisfaction.<br><br>Required Skills To Be Successful<br><br> Technical diploma or certificate in Automotive, Mechanical, Electrical, or a related field. Strong technical knowledge of heavy commercial vehicles, preferably Volvo trucks and buses. Proficiency in reading and interpreting electrical, hydraulic, pneumatic, and mechanical schematics. Proficiency in using Volvo Workshop Service Manuals and Volvo-approved diagnostic tools.<br><br>About The Team<br><br>You will be part of the DOMASCO Aftersales Service team supporting Volvo Trucks & Buses. The team works closely with Workshop Supervisors, Service Advisors, and other technical colleagues to deliver reliable service, efficient turnaround times, and a strong customer experience. This is a hands-on workshop environment where teamwork, safety, technical accuracy, and continuous improvement are highly valued.<br><br>What Equips You For The Role<br><br> Relevant experience in heavy commercial vehicle servicing and repair. Previous experience working on Volvo trucks and/or buses is preferred. Experience using electronic diagnostic tools and technical service information systems is an advantage. A strong commitment to safety, quality, first-time-right repairs, and continuous technical learning. Strong troubleshooting, diagnostic, and problem-solving skills. Good attention to detail and accuracy in repair execution. Effective time management and ability to complete assigned jobs within required timelines. Ability to work independently as well as effectively within a team. Commitment to first-time-right repairs and high-quality workmanship. Willingness to develop technical knowledge through continuous training and learning.<br><br>About Al-Futtaim Automotive<br><br>A major division of the UAE-based Al-Futtaim Group of companies, Al-Futtaim Automotive is an industry leader with presence in 10 countries across the Middle East, Asia and Africa.<br><br>Our core business activities at Al-Futtaim Automotive include distribution, manufacturing, leasing and aftersales, and we are firmly established as the regional representative of some of the world’s most iconic automotive brands: Toyota, Lexus, Honda, Jeep, Chrysler, Dodge, Volvo and RAM.<br><br>We are driven by a customer-centric approach, constantly pushing the boundaries on innovation, quality standards, and value-added service across our vast universe of customers - right from motoring enthusiasts to fleet operators to contractors. Our mission is to become the leader in custom-made mobility solutions by delivering nothing less than world-class omni-channel experiences.<br><br>We channel our local expertise and global trust to deliver one of the most comprehensive portfolios of mobility products and solutions, from passenger cars to SUVs, electric vehicles to high-performance motorbikes, commercial vehicles to industrial & construction equipment.<br><br>What keeps the company moving forward is a 9000-member strong team, with inspiring possibilities for growth, throughout the career path. This is Al-Futtaim Automotive and we empower talent to move forward.

Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Support Expansion Project Instrument activities for pre-commissioning, commissioning, preservation and start-up tasks and conduct Instrument field maintenance activities safely, including preventive, predictive and breakdown maintenance, to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities). Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Conduct preventive and corrective maintenance work on field instruments as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of instrumentation field issues, as directed and guided by Foreman/Supervisor and issue timely reports. Reviews the Piping & Instrument Diagram and Drawings (P&IDs), loop drawings, hook-up drawings, instrument index, instrument datasheets, logic diagrams and other documents required to tackle issues related to field instrumentation. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in regular Toolbox meeting with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe or observation cards. Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas industry or petrochemical industry Technical and Business Skills Computer literate with basic knowledge in MS Office software. Good written and oral communication skills in English. Extensive experience in the operation, maintenance, and calibration/testing of process control systems including Field, Panel, DCS, PLC’s instruments, vibration measurement, Fire and Gas and ESD systems. Valve (Control/ON-OFF/Emergency-Shutdown) stroking or calibration and troubleshooting skills. Ability to read and understand technical drawings (P&ID’s) and documents. Good adaptability to multinational environment with wide exposure to various cultures and customs. Experience working in H2S environment.

Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Supports Expansion Project Electrical support activities for pre-commissioning, commissioning, preservation and start-up tasks and conducts electrical field maintenance activities safely, including preventive, predictive and breakdown maintenance, to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities) Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Conduct preventive and corrective maintenance work on field Electrical Equipment as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of Electrical field issues, as directed and guided by Foreman/Supervisor and issue timely reports. Reviews the Piping and Instrument Diagram and Drawing (P&IDs), loop drawings, hook-up drawings, Electrical Index, Electrical datasheets, logic diagrams and other documents required to tackle issues related to Electrical field equipment. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in regular Toolbox meetings with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe and observation cards. Undertakes troubleshooting of equipment failure or operational problems. Seek guidance for problems of a more complex nature from Maintenance Superintendent, Vendor and OEM support. Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas industry or petrochemical industry Technical and Business Skills Good written and oral communication skills in English. Knowledge of computerized maintenance management systems. Knowledge of preventative and predictive maintenance and condition monitoring techniques. Basic computer skills. Ability to read and understand technical drawings (including Electrical Drawings) and documents. Good adaptability to multinational environment with side exposure to various cultures and customs

<p>We are seeking a detail-oriented Civil Drafting Technician/Designer to support the planning, design, and delivery of airport infrastructure projects. The role involves the preparation, coordination, and management of civil engineering drawings and design documentation for a wide range of airside and landside airport developments, including runways, taxiways, aprons, roads, utility corridors, drainage systems, grading works, and associated infrastructure. The Civil Drafting Support will work closely with civil engineers, airport planners, airfield specialists, utility engineers, and multidisciplinary design teams to produce high-quality engineering drawings and models throughout all project phases, from concept development to detailed design and construction support. The individual will be responsible for ensuring that drawings are accurate, coordinated, compliant with project standards, and aligned with applicable aviation regulations, engineering standards, and client requirements.The role requires proficiency in CAD and BIM platforms, strong attention to detail, and the ability to manage drawing production in a complex, multidisciplinary airport environment. The candidate will contribute to the successful delivery of airport expansion, modernization, rehabilitation, and greenfield development projects by supporting efficient design coordination, documentation control, and project execution.</p><p>Your role</p><ul><li>Prepare and maintain civil engineering drawings and design documentation for airport infrastructure projects, including runways, taxiways, aprons, airside service roads, landside road networks, utility corridors, drainage systems, and associated facilities.</li><li>Produce drawings in accordance with project requirements, company standards, and applicable industry practices.</li><li>Support the development of airfield layout drawings, geometric plans, marking layouts, grading plans, and airside infrastructure drawings.</li><li>Assist engineers in accurately translating design concepts into detailed technical drawings while ensuring compliance with applicable aviation and airport design standards.</li><li>Develop grading plans, contour drawings, earthworks layouts, stormwater drainage plans, profiles, cross-sections, and associated civil engineering documentation.</li><li>Ensure consistency between grading, drainage, and pavement design requirements while maintaining accurate drawing coordination.</li><li>Prepare detailed drawings for underground and above-ground utility networks, including water supply, sewerage, stormwater, electrical duct banks, communications corridors, and fuel infrastructure.</li><li>Coordinate utility layouts with other disciplines to avoid clashes and maintain constructability.</li><li>Support the preparation of civil drawings related to airfield and landside pavements, including pavement layouts, section details, construction details, pavement rehabilitation plans, and associated infrastructure works.</li><li>Incorporate engineering input into accurate and constructible design documentation.</li><li>Develop, update, and maintain CAD drawings and BIM models in accordance with project execution plans and digital delivery standards.</li><li>Support model coordination activities and ensure alignment between design models and drawing deliverables throughout the project lifecycle.</li><li>Work closely with civil engineers, airport planners, airfield specialists, structural, mechanical, electrical, ICT, and utility teams to coordinate design interfaces and ensure consistency across all project documentation.</li><li>Resolve drawing conflicts and support integrated project delivery.</li><li>Conduct drawing reviews and self-checks to ensure accuracy, completeness, consistency, and compliance with project standards.</li><li>Implement quality control procedures to minimize drafting errors and maintain high-quality deliverables.</li><li>Manage drawing updates and revisions throughout project development.</li><li>Maintain document control procedures, drawing registers, and revision histories to ensure that project teams are working with the latest approved documentation.</li><li>Support the preparation of construction drawings, as-built records, and project documentation packages.</li><li>Respond to drafting-related queries during project execution and assist engineers in resolving design and documentation issues arising during construction.</li><li>Incorporate survey data, GIS information, utility records, and existing airport infrastructure information into project drawings and models.</li><li>Ensure that design documentation accurately reflects site conditions and project constraints.</li><li>Contribute to the continuous improvement of drafting practices, CAD standards, BIM workflows, and digital delivery processes.</li><li>Support the adoption of innovative tools and technologies to enhance efficiency, consistency, and quality in airport project delivery.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>About you</h3><ul><li>Bachelor s degree in civil engineering.</li><li>ITI / Diploma in Drafting trade or Civil Engineering.</li><li>5+ years of experience in drafting relevant deliverable.</li><li>Experience in airport projects.</li><li>Strong hands-on experience with Autodesk AutoCAD and Civil 3D.</li><li>Good understanding of OpenRoads Designer, Infraworks, ArcGIS, QGIS is a plus.</li><li>Experience working with survey data formats, point clouds, LiDAR datasets, and GIS databases.</li><li>Familiarity with ICAO airport infrastructure requirements.</li><li>Utility coordination and underground services.</li><li>BIM workflows and data management.</li><li>Experience working on UK / Middle East / International aviation projects is preferred.</li><li>Ability to work independently and as part of a collaborative BIM team.</li><li>Knowledge of ACC / ProjectWise, Navisworks, and clash detection workflows.</li><li>Exposure to scripting or automation (Dynamo, Lisp, etc.) is a plus.</li></ul>

Job Purpose Perform condition monitoring of I&E Equipment utilizing available test equipment and to support I&E Reliability Engineers in identification of opportunities to improve equipment reliability, performing failure analyses and in maintaining compliance to all statutory and regulatory requirements as per company standards and policies.<br>Key Accountabilities Day-to-day Accountabilities and Reporting Implementation of safe work practices to ensure that no unsafe acts are committed either by his own self or contract manpower working under his supervision. Provide Full Support to Instrument & Electrical Reliability Engineers in achieving their business linked objectives. Condition Monitoring & Inspection of Field equipment on time, as per schedule. Maintain and calibrate all test and inspection tools as per schedule. Knowledgeable about discipline-related plant equipment regarding past failure history and modifications performed. Support Instrument & Electrical Reliability Engineers in review of Maintenance procedures/ITPM checklists and suggest improvements. Provide support to Instrument & Electrical Reliability Engineers in updating of Instrument & Electrical equipment data in SAP and ECM. Support Instrument & Electrical Reliability group in ensuring MICE/IPS lists are kept up do date in accordance with company standards and procedures. Assist Instrument & Electrical Reliability Engineer in tracking the progress of completed actions and monitoring the effects of completed actions. Assist in review of Spares and their association with corresponding equipment in SAP where required. Up-to-date record keeping of all relevant reliability data, drawings and reports. Maintain Instrument & Electrical Reliability Recommendations data base and follow up on recommendations closure. Develop Monthly condition monitoring reports and Asset Integrity metrics. Support Instrument & Electrical Reliability Engineers in performing QA/QC audits. Support Instrument & Electrical Reliability group in all compliance activities. Provide support to Instrument & Electrical Reliability group engineers in new and retrofit Instrument & Electrical projects. Exhibit good planning and time management skills. Demonstrate excellent coordination with other team members on common technical issues. Keeping abreast with technical modifications/improvements being implemented at plant site. Support Maintenance technicians in resolution of reliability issues and complex troubleshooting. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency. Implement all relevant policies, processes, procedures and instructions of Instrument & Electrical Reliability Section so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Instrument & Electrical Reliability Section to guarantee employee safety and delivery of high-quality products/services. Reporting Contribute to the preparation of timely and accurate monthly reports and metrics to meet section and departmental requirements. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.<br>Qualifications & Experience Education Required: Diploma in Instrumentation / Electronics Engineering Technology<br>Experience Required: 3-5 years as an Instrument Technician in the Petrochemical / O&GPreferred : Petrochemical and/or O&G in a senior tech position<br>Other Job Specific Requirements and/or Vocational Accreditations“Hands on” experience in provision of Maintenance support for field Instrumentation & related systems of a large-scale process plant. Good experience on Electronic Field Instrumentation such as SMART transmitters (Field Bus, 4-20m A, HART), control valves, vibration transducers, on-line analysers, custody flow metering systems, PLCs... Complete understanding of P&IDs, instrument loop drawings, data sheets, JBs layouts with excellent troubleshooting skills. Well versed with Hazardous Area classification and selection of Instruments. Capable of developing ITPM plans and Job instructions in the assigned areas. Plant Instrumentation Spares management. Hands on experience on Maintenance Management System-SAP preferred. Familiarity with most used international codes & standards. Capable of supervising contractor manpower during project execution if required. Computer literate and capable of working independently with Microsoft Office.

A Snapshot of Your Day<br><br>We are seeking a highly skilled and experienced Workshop Repair Technician with a strong background in machining and rotating equipment repairs such as (turbo and reciprocating compressors, steam and gas turbines.) The ideal candidate will have hands-on expertise in operating horizontal lathes, boring machines, and small milling machines, combined with the ability to perform precision inspections, generate technical drawings, and support continuous improvement initiatives within the workshop.<br><br>How You’ll Make An Impact<br><br>Operate horizontal lathes, boring machines, and milling machines for precision machining tasks. Has the knowledge to Perform complex repairs on turbo compressors, reciprocating compressors, steam turbines, and gas turbines. Execute reverse engineering for worn or damaged components. Conduct detailed dimensional inspections of parts using precision measuring tools. Prepare comprehensive inspection reports and maintain accurate documentation. Generate 2D and 3D CAD drawings for components and assemblies. Support reverse engineering projects and contribute to design improvements. Collaborate on process improvements and workshop development initiatives. Promote and maintain a strong safety culture in all activities. Utilize MS Office for reporting, documentation, and communication.<br><br><br>What You Bring<br><br>Diploma or Technical Certification in Mechanical Engineering or Machining with 10+ years of experience in rotating equipment repairs and machining operations. Proven ability to operate horizontal lathes, boring machines, and milling machines. Strong knowledge of turbo compressors, reciprocating compressors, steam turbines, and gas turbines repair processes. Proficiency in CAD software (Auto CAD, Inventor, Solid Works, or equivalent). Familiarity with reverse engineering techniques and precision measurement tools. Excellent understanding of safety standards and workshop best practices. Multi-tasking and adaptability in a fast-paced environment. Strong analytical and problem-solving skills with creative mindset for process improvement and innovation. Effective communication and teamwork abilities.<br><br><br>About The Team<br><br>Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Opportunity to work on challenging projects in an exciting environment Opportunity for remote/flexible work Professional support and strong collaboration with colleagues around the world Professional development opportunities within the company<br><br><br>https://jobs.siemens-energy.com/jobs

The HVAC/CRAC Technician will work in a fast-paced work environment and requires detailed working knowledge of facility equipment and operations to include facility systems operations, chillers, air conditioning, ventilation, and structural repairs. Ability to supervise, troubleshoot, and restore operations of facility systems and equipment scheduling preventive maintenance assignment and work orders. Job requires daily supervisory field inspections and assisting craftsman in assigned duties.<br><br>Essential Job Functions<br><br>Must possess good customer relation skills to effectively provide assistance to company and customer representatives. Must be able to respond to after-hour calls and work requirements. Must cooperate and support IAP policies Must be in and remain in the appropriate physical condition to meet the OSHA requirements of 50 pounds. If operating a company vehicle, must possess and retain valid current driver’s license and operate the company vehicle in a safe manner.<br><br>Education & Experience<br><br>High School diploma or GED. Minimum of 5 years of experience in maintaining and repairing commercial/industrial HVAC/R systems; Computer Room Air Conditioning (CRAC) Systems Must be a Journeyman HVAC with a CFC Universal License/Certification. Must be able to troubleshoot and repair Computer Room Air Conditioning Systems (CRAC)<br><br>Knowledge & Skills<br><br>Must possess strong organizational skills with attention to detail and follow up. Must be able to multi-task in a fast-paced environment. Must be customer service oriented. Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point. Knowledge of safety rules and practices and environmental policies.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

As the HVAC/ICWS Technician, you will be responsible for the operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning (HVAC), and Industrial Control & Water Systems (ICWS) supporting mission-critical facilities at Al Udeid Air Base. This role ensures reliable environmental control and water system operations in accordance with U. S. military standards, safety regulations, and host-nation requirements.<br><br>Essential Job Functions<br><br>HVAC Systems<br><br>Operate, inspect, maintain, and repair commercial and industrial HVAC systems, including chillers, AHUs, RTUs, split systems, and control systems Diagnose mechanical, electrical, and control-related HVAC faults and perform corrective maintenance Perform preventive maintenance (PM) in accordance with established schedules and technical manuals Monitor system performance and recommend improvements for efficiency and reliability<br><br>ICWS / Water Systems<br><br>Operate and maintain industrial control systems related to potable water, wastewater, and associated pumping and distribution systems Monitor SCADA/BMS interfaces and respond to alarms or system anomalies Conduct inspections, testing, and minor repairs on valves, pumps, sensors, and control components Support water system sampling, flushing, and compliance activities as required<br><br>General Duties<br><br>Maintain accurate maintenance logs, reports, and work orders Comply with all safety, environmental, and force protection requirements Coordinate with engineers, supervisors, and base personnel to support mission needs Respond to emergency calls and perform after-hours or on-call support as required Ensure tools, equipment, and work areas are maintained in safe working condition<br><br>Education & Experience<br><br>High school diploma or equivalent A minimum of five (5) years of experience in maintaining and repairing commercial/industrial HVAC/R systems and Industrial Chilled Water Systems (ICWS) EPA Universal Certification required<br><br>Knowledge & Skills<br><br>Working knowledge of industrial control systems and water system operations Ability to read and interpret technical drawings, schematics, and control diagrams Strong troubleshooting and problem-solving skills<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.