Embedded Systems Engineer Jobs in Qatar

<p>Leads key multi-discipline activities within the PMT Onplot Project Management via the Utilities &amp; Infrastructures Delivery team and coordinates with the contractor the execution of engineering, procurement and construction activities to meet milestones and stay within budget.</p><p>Coordinates project management activities including schedule analysis, risk monitoring, fabrication tracking, mechanical erection, SDR monitoring, early intervention, etc., to other critical packages as determined by Project Management, in order to meet project objectives.</p><p>Supports Engineering, Procurement, Construction and Commissioning to ensure plans are clearly understood by the CONTRACTOR and PMT and jointly working as a team to drive to key milestones to support execution sequence.</p><p>Ensures execution plan is monitored using the relevant KPIs to detect deviations and enable early intervention if necessary and communicates the execution performance in his area of responsibility through weekly and monthly Delivery reports, leveraging on the afore mentioned KPIs</p><p>Understands interdisciplinary dependencies to be able to make judgements on overall project management decisions having multi-discipline impacts.</p><p>Applies risk management techniques to facilitate decision making.</p><p>Communicates key technical issues and risks to management to facilitate decision making</p><p>Upholds the Onplot Project Safety Program (Ihtimam) principles and conduct all activities in a safe and efficient manner in accordance with company policies and procedures, ensuring the welfare of personnel and the protection of assets and the environment at all times.</p><p>Moreover, takes a leadership role in the implementation and adoption of the Project's safety culture for all teams within the area of responsibility.</p><p>Participates in Safety Walks and other similar Site initiatives.</p><p>Clear understanding of change management process and leads team to document and justify and manage risks associated with design change.</p><p>Evaluates, recommends and where necessary, participates in equipment testing at Vendor's factory, site visits as required, visits to Contractor's fabrication workshops, assessing Contractors' performance, monitoring progress against agreed project milestones, metrics, schedule, safety, and quality standards ensuring safe and timely execution of work activities.</p><p>Provides leadership to drive decisions for multi-discipline issues to progress the execution of the project. Drives alignment and decision making between stakeholder groups.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors' Degree in Engineering</p><p>10 years' experience in engineering roles, including 6 years in Oil &amp; Gas industry with a strong background in detailed engineering management of Major Oil &amp; Gas Projects, preferably experience on a major LNG project including 2-year experience in a supervisory role, including acting roles, or oversight of contractor/subcontractors/service/vendor personnel.</p><p>Experience with engineering leadership, leading multi-discipline activities and well versed in design safety aspects of engineering</p><p>Experience with risk assessment approach to decision making</p><p>Experience with LNG facilities</p><p>Experience with large process units' design</p><p>Experience working with major EPC Contractors in a Lump Sum environment</p><p>Demonstrates sound written and verbal communication skills with the ability to lead and communicate at all organizational levels</p><p>Demonstrates ability and sensitivity to work with people from a variety of cultural backgrounds</p><p>Field engineering experience is desirable</p><p>Technical background as a discipline engineer and experience as a Project Engineer, Field Engineer.</p><p>Good teamwork and facilitation skills.</p><p>Good analytical, organizational and problem-solving skills</p><p>Risk management experience</p>

Job Title: Pre Commissioning Supervisor-Piping Job Location: Ras Laffan<br>Job Summary:We are seeking an experienced Pre-Commissioning Supervisor – Piping to lead and coordinate pre-commissioning activities for major Oil & Gas projects. The successful candidate will be responsible for planning, supervising, and executing piping pre-commissioning activities while ensuring compliance with project specifications, safety standards, and completion procedures. The role requires strong technical expertise in piping systems, commissioning documentation, and project handover.<br>Mandatory Requirements & Qualifications:Experience:Minimum 7 years of experience as a Pre-Commissioning Engineer/Supervisor in the Oil & Gas industry. Experience on EPC projects involving piping systems. Ras Laffan project experience will be an added advantage. Education:Diploma or B. Tech in Mechanical Engineering. Technical Skills:Strong knowledge of piping pre-commissioning and commissioning activities. Experience preparing Method Statements, JSAs, Work Packs, and commissioning documentation. Familiarity with completions management systems and project handover processes. Knowledge of SHES requirements and industry safety standards. Ability to prepare schedules, resource plans, and progress reports. Good command of written and spoken English.<br>Mandatory Criteria:Must have Oil & Gas pre-commissioning experience. Minimum 7 years of relevant experience. Mechanical Engineering qualification (Diploma/B. Tech). Ability to join projects in Qatar. Ras Laffan project experience is preferred.<br>Key Responsibilities:Review project engineering, technical, and SHES documentation before execution. Prepare Pre-Commissioning Method Statements, JSAs, and work packs. Plan and coordinate pre-commissioning schedules, manpower, and resources. Identify and arrange required tools, test equipment, temporary facilities, consumables, lubricants, and third-party services. Coordinate with the Completions team to update system and sub-system completion databases. Participate in constructability reviews to ensure smooth pre-commissioning and handover. Ensure all commissioning records, documentation, and handovers comply with project procedures. Promote and maintain a strong safety culture throughout all pre-commissioning activities. Monitor progress and prepare accurate daily, weekly, and monthly status reports. Coordinate with construction, QA/QC, commissioning, and client teams to achieve timely project completion.

<p>The main role of the Technician is to perform preventive and corrective maintenance, to assist his team, and to support the improvement efforts in the department in order to increase the performance. Furthermore, to report any fault on the equipment to the Engineer, TO, STO.</p><p>Accountabilities</p><ul><li>Do the PPM assigned correctly and on time.</li><li>Perform corrective tasks and complete them on time.</li><li>Ensure high quality of their work.</li><li>Assist subcontractors to perform the work assigned to them.</li><li>Report defects, issues, breakdowns, damages, etc., to the Fault Reporting Center or Engineer, TO, STO.</li><li>Follow the duty roster.</li><li>Report any spare part requirements and availability.</li><li>Follow all instructions as given by the TO,STO, Engineers.</li><li>Take care of the tools, test tools and equipment.</li><li>Perform other related duties as assigned.</li></ul><p>Operational</p><ul><li>Comply with the Company standards specifically related to personal hygiene, dress code and behaviour.</li><li>Comply with health procedures, quality and in general all the relatives of HSEQ.</li><li>Follow the rules and regulations from the client and from FMM s HSEQ Management System, which includes attending all training sessions you are invited to and by reading the documents provided to them.</li><li>Escalate to their line manager any lack of proper equipment or tools for doing the work.</li><li>Report any accident, incident, near miss or health event at work to their line manager.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>ITI Certificate/Diploma or equivalent</li><li>Knowledge of regulations (e.g., OSHA, MSDS, NFPA, BS).</li><li>Problem solving skills.</li><li>Ability to work with tight deadlines and within constraints.</li><li>Teamwork.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p><b>Senior Electrical Engineer</b></p><p><b><br></b></p><p><b>Knowledge &amp; Qualification:</b></p><p>•Electrical Engineering graduate (BSEE preferred) with &gt;15 years of relevant HV experience in electrical engineering, including design, design review and commissioning in the electrical engineering field.</p><p><br></p><p>•Demonstrated knowledge &amp; experience performing detailed power system engineering studies including short circuit, load flow, transient motor start, protection relay coordination, arc flash, etc., and establish appropriate protective device settings.</p><p><br></p><p>•Strong knowledge in power plant electrical equipment commissioning and maintenance.</p><p><br></p><p>•Ability to manage the work per work quality standard and procedures.</p><p><br></p><p>•Ability to work with multi-culture of EPCs and off-taker.</p><p><br></p><p>•Strong in SAP/ SCADA and operation program for digital relays.</p><p><br></p><p>•Understand stability Test of Transformer, Generator &amp; Cables.</p><p><br></p><p>• Problem-solving capabilities.</p><p><br></p><p>•Experience in leading and guiding technical employees needed.</p><p><br></p><p>&nbsp;</p><p><br></p><p>Role &amp; Responsibilities:</p><p>Senior Electrical Engineer</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Electrical Engineering graduate (BSEE preferred) with &gt;15 years of relevant HV experience in electrical engineering, including design, design review and commissioning in the electrical engineering field.</li><li>Demonstrated knowledge &amp; experience performing detailed power system engineering studies including short circuit, load flow, transient motor start, protection relay coordination, arc flash, etc., and establish appropriate protective device settings.</li><li>Strong knowledge in power plant electrical equipment commissioning and maintenance.</li><li>Ability to manage the work per work quality standard and procedures.</li><li>Ability to work with multi-culture of EPCs and off-taker.</li><li>Strong in SAP/ SCADA and operation program for digital relays.</li><li>Understand stability Test of Transformer, Generator &amp; Cables.</li><li>Problem-solving capabilities.</li><li>Experience in leading and guiding technical employees needed.</li></ul><p></p></section>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p><strong>Job Description:</strong> Senior Planning Engineer Qatar Parsons is looking for an amazingly talented Senior Planning Engineer to join our team! In this role, you will be part of the shared services team, providing all necessary planning and scheduling support to the construction supervision team across large infrastructure projects. You will review and approve contractors work programs, monitor construction progress, support the development of recovery schedules in case of delays, and participate in the assessment and analysis of time-related claims.</p><p><strong>What You ll Be Doing</strong></p><ul><li>Providing planning and scheduling support required for the execution of design and construction projects, overseeing assigned engineering construction programs.</li><li>Reviewing and approving contractors baseline and updated work programs, including all narratives and supporting information, and providing detailed analysis and findings.</li><li>Using the latest versions of Primavera Project Management (P6) and Primavera Web Scheduling software to monitor and review baselines, updated project schedules, and project costs.</li><li>Ensuring the use of standardized forms and reports (e.g., client-standard formats) within Primavera Contract Management (Expedition).</li><li>Verifying actual progress on site and comparing performance against original plans and approved schedules.</li><li>Monitoring, adjusting, and updating cost plans and cash flows, and consolidating results in monthly reports.</li><li>Implementing and maintaining Earned Value Management (EVM) systems on projects to track schedule and cost performance.</li><li>Performing Extension of Time (EOT) assessments and preparing recommendation reports, including analysis of delays and entitlement.</li><li>Participating and coordinating with contractors to produce recovery work programs and mitigation plans in case of delays.</li><li>Participating in the assessment and analysis of time-related claims and providing planning input to commercial/claims teams.</li><li>Developing, implementing, and maintaining scheduling and project controls functions across all project stages (design, construction, testing, commissioning, and close-out).</li><li>Ensuring planning and scheduling activities comply with project objectives, client requirements, and internal procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree Civil Engineering or a relevant Engineering discipline from an accredited institution.</li><li>Certification/training in planning and scheduling of projects, and in the use of Primavera applications (Primavera Project Management P6 and Primavera Contract Management / Expedition), and cost engineering.</li><li>14 years of total experience in large infrastructure projects (roads, sewer, surface water, potable water), including a minimum of 5 years in a similar senior planning role with an engineering consultancy, supervision consultant, or project management consultancy.</li><li>Extensive knowledge and experience in project planning, budgeting, cost phasing, and control from project initiation to close-out, utilizing computer-based systems (Primavera P6 &amp; Primavera Contract Management) as part of integrated project services for multiple concurrent projects.</li><li>Completion of at least one project in the same role that is comparable in complexity and size to current projects.</li><li>Basic engineering knowledge in electrical, mechanical, civil, or a related field.</li><li>Proficient PC skills, including strong working knowledge of Microsoft Office, Primavera Project Management / P6, Primavera Contract Management / Expedition, and Power BI.</li><li>MMUP / MME/ UPDA certification is a must.</li><li>Regional experience in Qatar/GCC, with familiarity in client procedures and local authority requirements, is preferred.</li><li>Ability to assess complex project schedules, identify potential risks, and develop effective mitigation strategies to keep projects on track.</li><li>Expertise in managing project planning across various stages (design, construction, close-out) and balancing scope, cost, and schedule.</li><li>Strong ability to clearly communicate project status and planning insights to senior management and stakeholders, including preparation of detailed reports and presentations summarizing project performance.</li><li>Ability to analyze planning-related engineering challenges and propose actionable solutions aligned with project objectives.</li></ul>

We are seeking a highly experienced Wastewater Operations Advisor / Drainage Advisor to join a prestigious long-term infrastructure project in Qatar. This is a strategic advisory role for a senior professional with extensive experience in drainage and wastewater operations, asset management, and infrastructure management.<br>Key Responsibilities Provide expert technical, strategic, and operational advice on drainage and wastewater systems. Support the development and implementation of strategies to enhance operational performance, asset reliability, and service delivery. Advise on operations & maintenance (O&M), asset management, contract management, and project delivery across drainage and wastewater infrastructure. Review operational processes and recommend improvements to optimize efficiency, cost-effectiveness, and business performance. Support business transformation initiatives and contribute to the continuous improvement of operational practices. Ensure compliance with applicable regulations, health & safety standards, quality assurance requirements, and industry best practices. Provide guidance on governance, risk management, and regulatory compliance related to drainage operations. Collaborate with multidisciplinary teams, consultants, contractors, and key stakeholders to ensure successful project and operational outcomes. Evaluate operational and maintenance performance, identify risks, and recommend mitigation strategies. Support long-term planning, infrastructure sustainability, and asset lifecycle management initiatives. Contribute to the development of policies, procedures, and operational standards to improve organizational effectiveness. <br>Requirements Bachelor's degree or higher in Engineering or a related discipline. Degree must be obtained from North America, Western Europe, or Australia. Minimum 30 years of professional engineering experience. Minimum 10 years of experience within the wastewater/drainage industry. Minimum 5 years of experience in an Operations & Maintenance (O&M) environment.<br>Strong expertise in:Drainage and wastewater operations Asset Management Operations & Maintenance Project Management Contract Management Infrastructure planning and performance improvement<br>Good understanding of Health & Safety regulations, Quality Assurance, and Quality Control procedures. Experience working within large, multidisciplinary organizations or utility/infrastructure environments. Previous experience in the Middle East/GCC is highly preferred. Chartered Engineer status and/or Institute of Asset Management (IAM) accreditation is considered a strong advantage.

<p><b>Job Description</b></p><p>We are currently looking IT Helpdesk Support Engineer for our Qatar operations with the following terms &amp; conditions.</p><p><b><br></b></p><p><b>Required Skills and Qualifications</b></p><p><br></p><p>Mandatory: B.Sc. in Computer Science, Information Technology or Similar field</p><p><br></p><p>• Mandatory: 2+ years’ experience working with Microsoft Client and server</p><p><br></p><p>• platforms as a helpdesk technician.</p><p><br></p><p>• Mandatory: Microsoft certifications: Windows Client; Managing Modern Desktop;</p><p><br></p><p>• Azure</p><p><br></p><p>• Mandatory: 1 year experience in Azure, Microsoft 365 Suite support.</p><p><br></p><p>• Mandatory: Knowledge of Basic Network support.</p><p><br></p><p>• Mandatory: Ability to support users on a functional level, by offering guidance on</p><p><br></p><p>• how to use systems and equipment.</p><p><br></p><p>• Mandatory: Fluent Arabic &amp; English speaker</p><p><br></p><p>• Optional: Knowledge of Helpdesk ticketing system.</p><p><br></p><p>• Desirable: Network Certifications Network+/CCNA</p><p><br></p><p>Locally available candidates may only apply</p><p><br></p><p>Joining time frame: 2 weeks (maximum 1 month)</p><p><br></p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.Sc. in Computer Science, Information Technology or Similar field</li><li>2+ years experience working with Microsoft Client and server platforms as a helpdesk technician.</li><li>Microsoft certifications: Windows Client; Managing Modern Desktop; Azure</li><li>1 year experience in Azure, Microsoft 365 Suite support.</li><li>Knowledge of Basic Network support.</li><li>Ability to support users on a functional level, by offering guidance on how to use systems and equipment.</li><li>Fluent Arabic &amp; English speaker</li><li>Knowledge of Helpdesk ticketing system.</li><li>Network Certifications Network+/CCNA</li></ul>

<p>A leading engineering consultancy is seeking a highly experienced Asset Management Advisor to support a major infrastructure and utilities programme in Qatar. The successful candidate will provide strategic leadership and advisory support in the development, implementation and continuous improvement of infrastructure asset management frameworks, systems and organisational capabilities.</p><p>Key Responsibilities</p><ul><li>Provide strategic advice on infrastructure asset management and lifecycle management.</li><li>Support the establishment and enhancement of an effective Asset Management function .</li><li>Develop asset management strategies, policies, procedures and governance frameworks.</li><li>Support implementation and improvement of asset management systems aligned with international best practice.</li><li>Advise on lifecycle planning, asset performance, risk, reliability and optimisation.</li><li>Develop asset management KPIs and performance-monitoring frameworks.</li><li>Support organisational change and capability development.</li><li>Work closely with senior client stakeholders, operations teams and multidisciplinary engineering teams.</li><li>Support continuous improvement of infrastructure operations and maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in Engineering or a relevant technical discipline. Approximately 30 years of relevant professional experience preferred. Significant experience in infrastructure/utilities asset management. Strong understanding of ISO 55000 / international asset management principles . Experience establishing or transforming asset management functions within major organisations. Public-sector, municipal or major utility experience highly desirable. Middle East experience advantageous. IAM qualification/membership and/or Chartered Engineer status preferred. Excellent stakeholder management, advisory and change-management capabilities.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a high-caliber, multilingual Executive Assistant to operate as a strategic partner to senior leadership, combining executive support with analytical thinking, systems building, and business problem-solving capabilities.</p><br><p>This is not a traditional EA role.<br></p><ul><li><p>The successful candidate will function as a hybrid of:</p></li></ul><ol><li><p>Executive Assistant</p></li><li><p>Analyst</p></li><li><p>Operator / Junior Chief of Staff</p></li></ol><br><p>You will be deeply embedded in both business and personal workflows, acting as a force multiplier for executive decision-making, structuring ambiguity, and driving execution through data, systems, and proactive ownership.</p><br><p>The ideal candidate holds an MBA or strong analytical degree, has project management experience, and thrives in high-performance, multicultural environments.<br></p><p><strong>Executive Leverage &amp; Administration</strong></p><ul><li><p>Own and manage the Director’s calendar as a strategic asset, prioritizing based on ROI and impact</p></li><li><p>Act as a gatekeeper for communications and decision flow</p></li><li><p>Prepare and review high-level correspondence, reports, and presentations</p></li><li><p>Handle confidential and sensitive matters with utmost discretion</p></li><li><p>Integrate and manage both professional and personal scheduling seamlessly</p><br></li></ul><p><strong>Analytical &amp; Decision Support (Key Differentiator)</strong></p><ul><li><p>Conduct structured research on markets, companies, and investment opportunities</p></li><li><p>Prepare:</p></li></ul><ol><li><p>Briefing notes</p></li><li><p>Business summaries</p></li><li><p>Decision memos</p></li></ol><ul><li><p>Translate complex data into clear, actionable insights</p></li><li><p>Build simple models, frameworks, and structured outputs to support decision-making<br></p></li></ul><p><strong>Systems, Tools &amp; Process Optimization</strong></p><ul><li><p>Design, implement, and optimize workflows across:</p></li></ul><p>Email, calendar, CRM, and task management systems</p><ul><li><p>Build dashboards and trackers using:</p></li></ul><p>Notion, Excel, Airtable, or similar tools</p><ul><li><p>Utilize AI tools (e.g., ChatGPT, automation platforms) to:</p></li></ul><ol><li><p>Draft communications</p></li><li><p>Summarize data</p></li><li><p>Accelerate research</p></li></ol><ul><li><p>Identify inefficiencies and automate repetitive processes</p></li></ul><br><p><strong>Project &amp; Execution Management</strong></p><ul><li><p>Track strategic initiatives and ensure execution momentum</p></li><li><p>Coordinate across cross-functional teams and stakeholders</p></li><li><p>Translate ideas into structured execution plans</p></li><li><p>Ensure timelines, deliverables, and priorities are met</p></li></ul><br><p><strong>Communication &amp; Output Management</strong></p><ul><li><p>Draft high-quality:</p></li></ul><ol><li><p>Emails</p></li><li><p>Investor communications</p></li><li><p>Internal memos and reports</p></li></ol><ul><li><p>Prepare meeting agendas, briefs, minutes, and follow-ups</p></li><li><p>Maintain clear, concise, and executive-level communication standards</p></li></ul><br><p><strong>Travel, Events &amp; Lifestyle Integration</strong></p><ul><li><p>Manage complex international travel and logistics</p></li><li><p>Coordinate meetings, leadership events, and executive engagements</p></li><li><p>Handle personal matters with professionalism and confidentiality</p></li><li><p>Align personal and business priorities across time zones</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education</strong></p><ul><li><p>MBA (Business / Finance) – Strongly Preferred</p></li><li><p>OR Degree in:</p></li></ul><ol><li><p>Mathematics</p></li><li><p>Engineering</p></li><li><p>Computer Science</p></li><li><p>Business / Finance</p></li><li><p>Commerce</p></li><li><p>LLB / Law</p></li></ol><br><p><strong>Experience</strong></p><ul><li><p>3–6 years in:</p></li><li><p>Executive support to senior leadership</p></li><li><p>Consulting / investment / startups / operations</p></li><li><p>Experience in project management and business analysis is required</p></li><li><p>Prior experience with Athena or similar high-performance EA environments is a strong advantage</p></li></ul><br><p><strong>Technical Skills</strong></p><ul><li><p>Advanced proficiency in:</p></li></ul><ol><li><p>Microsoft Office / Google Workspace</p></li><li><p>Excel / Google Sheets (data handling &amp; analysis)</p></li></ol><ul><li><p>Experience with:</p><p>Notion / ClickUp / Asana / Airtable / CRM tools</p></li><li><p>Familiarity with:</p><p>AI tools and workflow automation</p></li><li><p>Basic no-code / systems thinking (preferred)</p></li></ul><br><p><strong>Communication &amp; Language Skills</strong></p><ul><li><p>Multilingual preferred</p></li><li><p>Fluent in English (business-level proficiency required)</p></li><li><p>Strong written and verbal communication skills</p></li><li><p>Ability to synthesize complex information clearly</p></li></ul><br><p><strong>Core Competencies</strong></p><ul><li><p>Strategic thinking and structured problem-solving</p></li><li><p>High level of ownership and accountability</p></li><li><p>Ability to manage multiple priorities simultaneously</p></li><li><p>Strong analytical and decision-support capability</p></li><li><p>High attention to detail and excellence</p></li><li><p>Discretion, professionalism, and integrity</p></li><li><p>Proactive mindset (anticipates vs reacts)</p></li></ul><br><p><strong>What Differentiates This Role?</strong></p><ul><li><p>You will drive decisions, not just support them</p></li><li><p>You will build systems, not just manage tasks</p></li><li><p>You will operate as a junior Chief of Staff / strategic operator</p></li><li><p>Exposure to high-level decision-making and business strategy</p></li></ul><br><p><strong>Success Metrics</strong></p><ul><li><p>Increase in executive time spent on high-value activities</p></li><li><p>Speed and quality of decision support</p></li><li><p>Reduction in operational inefficiencies</p></li><li><p>Quality of output (reports, briefs, communication)</p></li><li><p>Ability to independently manage workflows and priorities</p></li></ul><p></p></section>

<p>Must have experience and be able to hydro test pipe-systems and static equipment. Must have more than 3 years experience in pipefitting work in the Petrochemical or Power Generation industry. Must have a good understanding of QA/QC and HSE compliance audits. Must be able to read isometric drawings. Must have experience in and be able to fit all piping as per isometrics. Must be able to make proper weld preparation including hi-low. Must be able to fit a 45-degree pipe-to-pipe connection. Must have experience in and be able to place and remove spades and to open and close pipe flanges, recognise the gasket types and types of bolts. Must be able to repair and make steam tracing. Must have experience in and be able to tighten bolts with a manual torque wrench Responsible to make proper weld preparation including hi-low. To follow any other instructions given by HSE Manager or HSE Engineer Responsible to adhere and follow the implemented Quality, Health, Safety and Environmental Policy, objectives and procedures</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

We currently have an opportunity for a Head of Marine role. This position is based in Qatar onshore.<br> <br>Minimum requirements<br>Previous experience in Marine Warranty Survey (MWS) or marine assurance.<br>Previous experience supporting EPCI offshore projects (installation, construction, heavy lift, transportation and installation, hook-up & commissioning).<br>Previous experience with an IOC (International Oil Company), major EPC contractor, or large offshore operator.<br>Demonstrated experience managing marine operations for multiple offshore construction vessels simultaneously.<br>Strong working knowledge of DP operations, towage, heavy transport, and offshore marine risk management.<br>Previous experience in Middle East offshore projects is an advantage.<br>Excellent stakeholder management and communication skills, with experience engaging clients, contractors, classification societies, and marine assurance teams.<br>Able to provide technical leadership, challenge contractors constructively, and make sound operational decisions under schedule and commercial pressure.<br>Responsible for marine safety, quality assurance and compliance for NFPS Compression projects marine scope in accordance with the LNG company PGO-OFF-LGSOVR-002 Marine Operations Procedures (MOP) and further revisions, international regulations and standards, classification society, flag state, local regulations. Consistently guide and coordinate the work of the project marine leads and coordinators assigned to the individual NFPS Compression projects. <br>NFPS Compression projects focal point and custodian of the marine safety and quality assurance activities for all marine units engaged on the projects and manages marine assurance processes across NFPS Compression projects including vessel suitability assessments, marine assurance inspections and audits (e.g. OVID), marine warranty surveys, DP assurance. Ensure that Contractor personnel and Company Teams are qualified, trained and with suitable level of experience and expertise with respect to marine activities. <br>Managing active interfaces and engagements with OPCO Marine, and NFPS Compression PMTs to ensure the marine scope is executed consistently, effectively and efficiently to achieve project objectives. <br>Establish effective communication and strategic connection among critical project stakeholders including EPC and Marine Contractors to identify and implement solutions in a timely manner. Facilitate and support resolution-oriented communication among marine stakeholders including EPC and Marine Contractors, vessels owners, contractors and third parties. <br>Implement and maintain an efficient Marine Incident Reporting System, support root causes analysis and corrective action identification and implementation, lead critical marine incident investigations (as marine SME), attend offshore survey/inspections and marine audits as needed.<br> <br>Qualification <br>Bachelor’s degree in sciences, marine disciplines, or engineering or Marine First Class Certificate of Competency<br> <br>Knowledge and experience<br>10 years seagoing experience as a shipboard engineer or sea officer, including 2 years as Chief Engineer or Master <br>Experienced in handling/managing offshore marine units operating in the oil and gas industry. Broad and extensive knowledge of critical marine operations including offshore installation and construction vessels and barges, heavy lifts, transportation, pipe and cable lay, jack-up accommodation barges, dive support vessels. <br>Knowledge of Dynamic Positioning Systems & Operations, DP FMEA Analysis, DP FMEA Proving Trials, Annual DP Trials, ASOG/CAM. <br>Experienced in managing marine safety and quality assurance & compliance processes, following corporate requirements and international standards. <br>High knowledgeable in International Maritime Regulations, Codes and Standards. <br>Experience within the Middle East region is advantageous. <br>Previous Marine Warranty Surveyor (MWS) and Marine Consultancy experience is advantageous. <br>International Marine Contractors Association (IMCA) accreditation & certification is preferred. <br>Local and international maritime regulations (e.g., IMO, SOLAS, MARPOL, ISM Code).<br><br><br>People are our business worldwide<br> <br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

We are looking for an experienced Senior Infrastructure Engineer / Network Ops Lead with strong expertise in Azure, Google Cloud Platform (GCP), cloud networking, and enterprise infrastructure operations. Key Skills Required:✅ 8+ years of experience in Cloud Infrastructure & Network Operations✅ Strong hands-on experience with Microsoft Azure & Google Cloud Platform (GCP)✅ Azure Networking:VNets NSGsLoad Balancers Private/Public Endpoints VPN Service Gateways Express Route Gateways Site-to-Site VPN✅ GCP Networking:VPC Networks VPC Firewalls Direct Connect✅ Enterprise Firewall Experience:Palo Alto Fortinet Check Point✅ Load Balancing:F5 Network Load Balancers✅ Networking Expertise:BGP & OSPF Routing Protocols Azure Express Route OCI Fast Connect Cloud connectivity solutions⭐ Additional advantage:Oracle Cloud Infrastructure (OCI) Virtual Cloud Network (VCN) Network Firewall

We are looking for an experienced Senior Infrastructure Engineer / Network Ops Lead with strong expertise in Azure, Google Cloud Platform (GCP), cloud networking, and enterprise infrastructure operations. Key Skills Required:✅ 8+ years of experience in Cloud Infrastructure & Network Operations✅ Strong hands-on experience with Microsoft Azure & Google Cloud Platform (GCP)✅ Azure Networking:VNets NSGsLoad Balancers Private/Public Endpoints VPN Service Gateways Express Route Gateways Site-to-Site VPN✅ GCP Networking:VPC Networks VPC Firewalls Direct Connect✅ Enterprise Firewall Experience:Palo Alto Fortinet Check Point✅ Load Balancing:F5 Network Load Balancers✅ Networking Expertise:BGP & OSPF Routing Protocols Azure Express Route OCI Fast Connect Cloud connectivity solutions⭐ Additional advantage:Oracle Cloud Infrastructure (OCI) Virtual Cloud Network (VCN) Network Firewall

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Company :</strong> Global Projects Services AG</p><p><strong>Skills :</strong> Pipeline Engineering</p><p><strong>Experience :</strong> 8 + Years</p><p><strong>Education :</strong> Associates/2 yr Degree/Diploma</p><p><strong>Location :</strong> Offshore</p><p>Join Saipem and engineer a sustainable future. We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as "One Company", our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.</p><p><strong>Project:</strong> Mag Jupiter</p><p><strong>Job Title:</strong> Hydrotest Supervisor</p><p><strong>Location:</strong> Offshore Qatar</p><p><strong>Job Description:</strong> The Subsea Pipeline Pre-commissioning Supervisor is responsible for supervising and coordinating all pre-commissioning activities for subsea pipelines, including flooding, cleaning, gauging, hydrotesting, dewatering, and nitrogen purging and packing. The role ensures safe, efficient, and technically compliant execution in accordance with QE LNG project specifications, procedures, safety standards, and schedule. Preferably, the candidate should have prior experience in QE LNG's onshore and offshore fields, with strong familiarity with project interfaces, operational standards, and regulatory requirements specific to the QE LNG environment.</p><p><strong>Key Responsibilities:</strong></p><ul><li>Supervise the execution of subsea pipeline pre-commissioning operations offshore as per approved procedures and project specifications.</li><li>Ensure that the pre-commissioning spread is mobilized, tested, and operated in line with safety and operational requirements.</li><li>Coordinate with pre-commissioning technicians/ operators/ mechanics, subcontractors, pre-commissioning engineer (s), and client representatives during operations.</li><li>Monitor operation parameters such as pressure, flowrate, temperature, and chemical injection, ensuring accurate data logging and reporting.</li><li>Verify readiness of equipment, consumables, and chemicals for each activity.</li><li>Conduct toolbox talks and ensure compliance with PTW, HSE regulations, and company policies.</li><li>Prepare onsite operational reports and compile pre-commissioning dossiers, including test records, calibration certificates, and reports.</li><li>Report progress, deviations, and potential issues to pre-commissioning engineer and propose solutions.</li><li>Lead troubleshooting during pre-commissioning anomalies or equipment issues.</li></ul><p><strong>Qualifications and Experience:</strong></p><ul><li>Diploma or Degree in Mechanical, Offshore, or Pipeline Engineering (or equivalent).</li><li>Minimum 8 years of experience in offshore pipeline pre-commissioning, with at least 3 years in a supervisory role.</li><li>Strong communication skill in English language.</li><li>In-depth knowledge of DNV-ST-F101, API standards, and other relevant international codes.</li><li>Proven experience in managing large teams (30+ personnel) during pre-commissioning phases.</li><li>Strong technical understanding of pre-commissioning equipment including suction pumps, flooding pumps, chemical injection units and associated troubleshooting.</li><li>Familiarity with QE LNG project specifications and offshore operating practices is highly preferred.</li><li>Strong communication, coordination, and leadership skills with a safety-first mindset.</li></ul><p><strong>What are we looking for</strong></p><p><strong>Education:</strong> Diploma or Degree in Mechanical, Offshore, or Pipeline Engineering (or equivalent).</p><p><strong>Experience:</strong> Minimum 8 years of experience in offshore pipeline pre-commissioning, with at least 3 years in a supervisory role.</p><p><strong>Languages:</strong> English Language skills required (and any other specified by Project)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Degree in Mechanical, Offshore, or Pipeline Engineering (or equivalent).</li><li>Minimum 8 years of experience in offshore pipeline pre-commissioning, with at least 3 years in a supervisory role.</li><li>Strong communication skill in English language.</li><li>In-depth knowledge of DNV-ST-F101, API standards, and other relevant international codes.</li><li>Proven experience in managing large teams (30+ personnel) during pre-commissioning phases.</li><li>Strong technical understanding of pre-commissioning equipment including suction pumps, flooding pumps, chemical injection units and associated troubleshooting.</li><li>Familiarity with QE LNG project specifications and offshore operating practices is highly preferred.</li><li>Strong communication, coordination, and leadership skills with a safety-first mindset.</li></ul><p></p></section>

Primary Purpose Of The Job<br><br>Carries out, supervises and co-ordinates the provision of drawing and design service to meet the requirement of engineering, maintenance and modification of Refining Operations plants and equipment.<br><br>Develops, manages, and maintains all aspects of documentation control (electronic & hard copy files) including philosophies, strategies, specifications, procedures and the design and implementation of a comprehensive documentation service. Responsible for coordinating Management of Change (MOC) processing and approval including preparation of As-built drawings, data sheets and other associated documents. Ensure correct level of accuracy and quality of presentation and that all drawings conform as per approved standards, specification and design requirement.<br><br>Provide information on Company standards to be used and the applicable numbering system. Also provide assistance to check and comment on incoming work from Contractor/vendor and review submission with the responsible discipline engineer. Liaison with project engineers to ensure correct and final handing over of project deliverables as built (Dossiers, drawings etc.).<br><br>Required Experience And Skills<br><br>Good knowledge of English, both written and spoken. Good Knowledge of computerized Technical Document Management system (TDMS) and Electronic Document System (EDMS). A good level computer skill to set up application of Access, Excel with a good working knowledge of Auto CAD. MS project.12 Year experience in design work in a drawing office of a major petro-chemical design contracting organization including preferably at least 5 years in Drawing Office Supervisory post. Must be fully conversant with current international recognized standards and Codes of Practice related to the Petrochemical industry. With good knowledge and exposures in electrical, instrumentation and piping materials for oil and gas refining facilities or petrochemical industry.<br><br>Educational Qualifications<br><br>Bachelor of Science in Mechanical Engineering (BSME).

<p>Co-ordinating / attending the inspection, tests and punch listing on behalf of Company</p><p>Undertake familiarization with Project and discipline specific inspection documentation to ensure understanding of contract requirements</p><p>Implement quality inspection procedures on construction activities, suppliers, subcontractors to ensure compliance with project specification</p><p>Ensure that the documentation generated by the contractor for inspections, tests, surveillance and surveys meets the requirements of the Project Quality Plan, ITPs and project requirements</p><p>Ensure completion of relevant forms and reports on inspections and tests undertaken by the contractor and maintenance of inspection records</p><p>Communicating effectively with the contractor, third parties and end users at your level</p><p>Ensuring that all equipment used for measuring and testing is in calibration and such records are available</p><p>Perform Surveillance of project site construction activities to identify problems and potential or actual non-conformances and to assist in proposing corrective and preventive actions</p><p>Liaise with other site Supervisors and Contractor to be aware of planned and completed construction works to ensure NDE is planned and performed</p><p>Assist Sr. QA/QC Engineer in the review/approval of Contractor QA/QC documents such as QCPs, ITPs, WPS/PQRs/ Special Processes / Personnel qualifications, Material Approval Requests, Vendor Documents, MRBs, Project Dossiers etc.</p><p>Monitor / Witness Contractor's material preservation, fabrication, installation, inspection and testing activities related to the Structural Steel, Process Piping, Pipelines, tanks, Rotating and Static equipment including internals installation and associated preceding and succeeding interface activities</p><p>Witness / verify all inspection and testing activities related to the Welding, NDT, PWHT, Hardness testing, pressure testing of valves, Alloy Verification, painting etc., starting from the procedures / personnel qualification till the respective systems hydro testing and ensure compliance with the project requirements</p><p>Closely monitor the performance of special process and personnel, weld Repairs / NDT status etc., Controls exercised by the contractor and appraise Sr. QA/QC engineer in case of any concerns</p><p>Participate in the receiving inspection of project permanent materials and verification of associated documentation for traceability of Piping bulk materials, Structural steel, Static and Rotating equipment, Consumable like welding electrodes / filler wires / gases, Painting / wrapping materials etc.</p><p>Follow-up on Corrective Actions to close-out non-conformances</p><p>Monitor trends of non-compliance with requirements and feedback on the status of Contractor's performance</p><p>Initiate Surveillance / NCR's for SR. QA/QC Engineer's approval</p><p>Maintaining relevant QA/QC documents / records</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical/Metallurgical/Materials Engineering degree, technical diploma and experience with direct exposure to quality Control in multi-discipline construction environment. Preferably having formal training in QC and membership with recognized charts or other professional institutions.</p><p>CSWIP 3.2 / AWS-SCWI Sr. Welding Inspector and NDT Level-II (ASNT, ISO, etc.) certification is a must. Preferred to have BGAS grade-2 / NACE Level-2 Painting Inspector certificate. Other equivalent certifications provided by internationally recognized organizations can be accepted.</p><p>10 years' experience for Bachelor's degree engineers and 15 years' experience for technical diploma holders in similar position in Oil &amp; Gas sector.</p><p>Experience in GCC is desirable</p><p>Candidate should have hands on working experience related to storage tanks, piping, pipeline welding inspection and testing. Installation of static &amp; rotating equipment</p><p>The candidate should have sound working knowledge on QC aspects and various testing requirements related to major oil &amp; gas / petrochemical focused construction projects</p><p>Duties are normally complex and vary and require ability to work well with contractor's personnel and colleagues at all levels in multidisciplinary, multicultural environments.</p>

IT Network Specialist/Engineer <br>Job Responsibilities<br>Deploy, configure, and manage Cisco network devices including Nexus 7k switches, Cisco ACI, Cisco 3850/9300 access switches, and Wireless Controllers. Set up and maintain Cisco IP Telephony systems for seamless voice communication.manage F5 load balancers to optimize network traffic and ensure redundancy. Configure and maintain various firewall solutions, including Cisco FTD, ASA, Palo Alto, and Fortinet, to protect network resources. Administer VPN solutions such as Cisco Any Connect and Site-to-Site VPNs, ensuring secure remote access and inter-site connectivity. Manage Meraki Switches and firewalls within the network infrastructure. Utilize Cisco ISE for network access control, policy enforcement, and secure network access. Oversee Azure network components, including Network Virtual Appliances and Virtual Networks, while understanding regions and subscriptions for optimized resource allocation. Handle GCP networking services, including VPC, Cloud Load Balancing, Cloud Armor, and Identity-Aware Proxy, to maintain a robust and secure cloud infrastructure.<br>Job Requirements and Qualifications<br>Bachelor’s degree in information technology, Computer Science, or a related field. Professional certifications such as CCNA, CCNP, PCNSA, AZ900, AZ700 are preferred but not Mandatory. Proven experience with Cisco networking equipment and software. Solid understanding of network infrastructure and hardware. Ability to think through problems and visualize solutions. Knowledge of application transport and network infrastructure protocols. Ability to work with all levels of staff within and outside of IT and outside the organization. A self-starter able to work independently but comfortable working in a team environment. Good analytical and problem-solving skills. Dependable and flexible when necessary. Experience with network diagnostic, monitoring, and analysis tools.

IT Network Specialist/Engineer <br>Job Responsibilities<br>Deploy, configure, and manage Cisco network devices including Nexus 7k switches, Cisco ACI, Cisco 3850/9300 access switches, and Wireless Controllers. Set up and maintain Cisco IP Telephony systems for seamless voice communication.manage F5 load balancers to optimize network traffic and ensure redundancy. Configure and maintain various firewall solutions, including Cisco FTD, ASA, Palo Alto, and Fortinet, to protect network resources. Administer VPN solutions such as Cisco Any Connect and Site-to-Site VPNs, ensuring secure remote access and inter-site connectivity. Manage Meraki Switches and firewalls within the network infrastructure. Utilize Cisco ISE for network access control, policy enforcement, and secure network access. Oversee Azure network components, including Network Virtual Appliances and Virtual Networks, while understanding regions and subscriptions for optimized resource allocation. Handle GCP networking services, including VPC, Cloud Load Balancing, Cloud Armor, and Identity-Aware Proxy, to maintain a robust and secure cloud infrastructure.<br>Job Requirements and Qualifications<br>Bachelor’s degree in information technology, Computer Science, or a related field. Professional certifications such as CCNA, CCNP, PCNSA, AZ900, AZ700 are preferred but not Mandatory. Proven experience with Cisco networking equipment and software. Solid understanding of network infrastructure and hardware. Ability to think through problems and visualize solutions. Knowledge of application transport and network infrastructure protocols. Ability to work with all levels of staff within and outside of IT and outside the organization. A self-starter able to work independently but comfortable working in a team environment. Good analytical and problem-solving skills. Dependable and flexible when necessary. Experience with network diagnostic, monitoring, and analysis tools.

Primary Purpose Of The Job<br><br>Lead and supervise the Project Services team in delivering comprehensive Cost Estimation, Cost Monitoring and Control (including budget management), Planning and Scheduling, Invoice Processing and Monitoring, and Document Control services. Ensure all activities support the successful execution of projects on schedule, within budget, and in full alignment with project requirements. Promote and uphold the highest standards of Quality, Health, Safety, and Environment (QHSE) in strict compliance with the QHSE Management System.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ relevant experience in the Oil & Gas industry with an IOC, NOC, EPIC contractor, or major Oil & Gas company, focused on large-scale project execution. At least 5 of those years must be in a Head or Lead Project Control Engineer role within an IOC/NOC or EPIC contractor environment. Proficient, hands-on experience with planning and scheduling software including Primavera P6, P6 Analytics, Primavera Risk Analysis, MS Project, MS Office, and SAP. Demonstrated expertise in Cost Monitoring, Cost Control, and Reporting processes. Proven capability in implementing industry best practices along with company systems, standards, and processes. Experience supporting the development of project execution strategies, engineering workflows, project management processes, and detailed project execution plans. Strong familiarity with activities related to engineering, procurement, fabrication, installation, commissioning, and start-up of major onshore projects. Possesses strong management, communication, conflict resolution, and presentation skills.<br><br>Educational Qualifications<br><br>Bachelor’s degree in an Engineering discipline from a recognized university; a higher academic qualification is considered an advantage. Membership in a recognized professional engineering association or institution is required. Project Management Professional (PMP) certification or equivalent is an added advantage.

Primary Purpose Of The Job<br><br>Lead and supervise the Project Services team in delivering comprehensive Cost Estimation, Cost Monitoring and Control (including budget management), Planning and Scheduling, Invoice Processing and Monitoring, and Document Control services. Ensure all activities support the successful execution of projects on schedule, within budget, and in full alignment with project requirements. Promote and uphold the highest standards of Quality, Health, Safety, and Environment (QHSE) in strict compliance with the QHSE Management System.<br><br>Required Experience And Skills<br><br>Minimum of 15 years’ relevant experience in the Oil & Gas industry with an IOC, NOC, EPIC contractor, or major Oil & Gas company, focused on large-scale project execution. At least 5 of those years must be in a Head or Lead Project Control Engineer role within an IOC/NOC or EPIC contractor environment. Proficient, hands-on experience with planning and scheduling software including Primavera P6, P6 Analytics, Primavera Risk Analysis, MS Project, MS Office, and SAP. Demonstrated expertise in Cost Monitoring, Cost Control, and Reporting processes. Proven capability in implementing industry best practices along with company systems, standards, and processes. Experience supporting the development of project execution strategies, engineering workflows, project management processes, and detailed project execution plans. Strong familiarity with activities related to engineering, procurement, fabrication, installation, commissioning, and start-up of major onshore projects. Possesses strong management, communication, conflict resolution, and presentation skills.<br><br>Educational Qualifications<br><br>Bachelor’s degree in an Engineering discipline from a recognized university; a higher academic qualification is considered an advantage. Membership in a recognized professional engineering association or institution is required. Project Management Professional (PMP) certification or equivalent is an added advantage.