Computer Technician Jobs in Qatar

Under the authority of the Client HSE-SA/Representative, ensures the export vessel safely transits through the Al Shaheen Field and the mooring/unmooring is executed in a safe and consistent manner as per relevant international and Client standards and in compliance with Al Shaheen Port Regulations and/or anyother Client procedures.<br>General Tasks:Reports to the Company's HSE-SA. Demonstrates an incident-free mindset & shall comply with Company's list of 10 important rules Performs any tasks within the gambit of the contract as delegated by the Company's HSE-SA and / or Company's representative. Is responsible for maintaining up to date JSA’s and risk assessments. When requested, performs inspections of terminal assets as per Terminal procedures. Responsible for common marine team’s activities and performance’s including their adherence towards Company's HSE policies. Is responsible for FSO support boats introduction to the field including all export related procedures and processes Familiarizes and complies with all Company's rules and regulations as stated in the Company's CMS. Familiarises and complies with all Terminal related processes and procedures Familiarises and complies with all applicable national and international statutory laws. Familiarises and complies with all applicable maritime legislation as per IMO. Familiarises and complies with all applicable OPITO & IMCA standards.<br>In charge of the Common Marine Team (CMT) on each FSO which is composed of 2 Mooring Masters, 1 Mooring Master Assistant, 1 Lead Swimmer, 1 Mechanical Technician, 1 Swimmer, 2 terminal VTS operators, 1 Rigging Supervisor, 1 Rope Access Supervisor, 1 Rope Access Technician and 1 Coxswain.<br>Duties of the CMT are:• Export Vessel Pilotage• Mooring/Unmooring Export Vessels• Export hose connection/disconnection• Level One Maintenance of:SPM & Mooring Hawser Mooring fitting spares & Mooring Masters Toolbox Tandem Hawser Floating hoses<br>The list of the above enumerated tasks and responsibilities is a summary and indicative. Assists HSE-SA/Representative in performing audit of the AHTs chartered by Company to work for the FSO activities. Ensures that all Company Procedures and Policies are adhered to. Ensures that all relevant Legislation and Regulations are adhered to. Ensures that all Client Standard Operating Procedures and Regulations are adhered to. Completes all works to the Client's satisfaction.<br>During any emergency when requested by the Company and or the Company's representative/HSE-SA, performs any tasks as may be required of them. Such emergencies may include but not be limited to fire, explosion, oil spill’s etc.<br>Agrees to comply with the QHSE instructions in order to:Preserve their health and safety and those of other persons affected by his acts or omissions. Contribute to the continuous improvement of QHSE management system.<br>Is responsible for promotion and diffusion of the safety culture:Ensures the implementation of preventive and corrective QHSE actions. Contributes to the elaboration of the HSE plan and ensures its execution. Participates to QHSE audits (internal & external).<br>Working Hours: 12h, 7 days per week Rotation: 4 weeks on/ 4 weeks off<br>Certificates:IMO STCW 95 deck officer class 1 certificate, unlimited Bridge Team Resource Management Duties to fulfil on tankers (gas or oil as appropriate; STCW V/1 §2) Pilotage certificate or license issued by the National Competent Authority of the country or area Record of Pilotage Training Simulator training Testing gas in enclosed spaces BST/HUET or BOSIET<br>Qualifications: Technical certificates or relevant nautical studies<br>Experience:Minimum of 30 months on-board service as senior deck officer (Chief Officer or above) on board a seagoing AFRA MAX tankers or larger, or on-board seagoing gas tanker or larger, as appropriate. Familiar with tanker operations (gas, oil, chemical or product as appropriate) Minimum of 36 months of mooring master experience including tandem mooring vessel above 150,000 DWTFamiliar with the area of operations, its navigational hazards and/or obstructions and its environmental conditions Familiar with the operation of terminal tugs Attended a minimum of six berthing/un-berthing operations and then performed a minimum of three berthing, un-berthing operations under supervision of an experienced terminal pilot<br>Technical Skills: Experience in SPM and Hoses Maintenance is a plus<br>Office Skills: Pack Office<br>Language: English preferred<br>Social Skills:Able to motivate and to unite employees working together around a common project Able to manage several issues simultaneously Able to work transversally and in synergy with the operational heads as well as with all concerned parties Good management / stress resistance / pressure Committed to vigorous quality and cost control Able to manage several issues simultaneously Able to take initiatives and decision Pays attention to details Force proposal Autonomy Planning Organization Rigor Reactivity Relational ease Teamwork Adaptability Initiative Force proposal Flexibility

Under the authority of the Client HSE-SA/Representative, ensures the export vessel safely transits through the Al Shaheen Field and the mooring/unmooring is executed in a safe and consistent manner as per relevant international and Client standards and in compliance with Al Shaheen Port Regulations and/or anyother Client procedures.<br>General Tasks:Reports to the Company's HSE-SA. Demonstrates an incident-free mindset & shall comply with Company's list of 10 important rules Performs any tasks within the gambit of the contract as delegated by the Company's HSE-SA and / or Company's representative. Is responsible for maintaining up to date JSA’s and risk assessments. When requested, performs inspections of terminal assets as per Terminal procedures. Responsible for common marine team’s activities and performance’s including their adherence towards Company's HSE policies. Is responsible for FSO support boats introduction to the field including all export related procedures and processes Familiarizes and complies with all Company's rules and regulations as stated in the Company's CMS. Familiarises and complies with all Terminal related processes and procedures Familiarises and complies with all applicable national and international statutory laws. Familiarises and complies with all applicable maritime legislation as per IMO. Familiarises and complies with all applicable OPITO & IMCA standards.<br>In charge of the Common Marine Team (CMT) on each FSO which is composed of 2 Mooring Masters, 1 Mooring Master Assistant, 1 Lead Swimmer, 1 Mechanical Technician, 1 Swimmer, 2 terminal VTS operators, 1 Rigging Supervisor, 1 Rope Access Supervisor, 1 Rope Access Technician and 1 Coxswain.<br>Duties of the CMT are:• Export Vessel Pilotage• Mooring/Unmooring Export Vessels• Export hose connection/disconnection• Level One Maintenance of:SPM & Mooring Hawser Mooring fitting spares & Mooring Masters Toolbox Tandem Hawser Floating hoses<br>The list of the above enumerated tasks and responsibilities is a summary and indicative. Assists HSE-SA/Representative in performing audit of the AHTs chartered by Company to work for the FSO activities. Ensures that all Company Procedures and Policies are adhered to. Ensures that all relevant Legislation and Regulations are adhered to. Ensures that all Client Standard Operating Procedures and Regulations are adhered to. Completes all works to the Client's satisfaction.<br>During any emergency when requested by the Company and or the Company's representative/HSE-SA, performs any tasks as may be required of them. Such emergencies may include but not be limited to fire, explosion, oil spill’s etc.<br>Agrees to comply with the QHSE instructions in order to:Preserve their health and safety and those of other persons affected by his acts or omissions. Contribute to the continuous improvement of QHSE management system.<br>Is responsible for promotion and diffusion of the safety culture:Ensures the implementation of preventive and corrective QHSE actions. Contributes to the elaboration of the HSE plan and ensures its execution. Participates to QHSE audits (internal & external).<br>Working Hours: 12h, 7 days per week Rotation: 4 weeks on/ 4 weeks off<br>Certificates:IMO STCW 95 deck officer class 1 certificate, unlimited Bridge Team Resource Management Duties to fulfil on tankers (gas or oil as appropriate; STCW V/1 §2) Pilotage certificate or license issued by the National Competent Authority of the country or area Record of Pilotage Training Simulator training Testing gas in enclosed spaces BST/HUET or BOSIET<br>Qualifications: Technical certificates or relevant nautical studies<br>Experience:Minimum of 30 months on-board service as senior deck officer (Chief Officer or above) on board a seagoing AFRA MAX tankers or larger, or on-board seagoing gas tanker or larger, as appropriate. Familiar with tanker operations (gas, oil, chemical or product as appropriate) Minimum of 36 months of mooring master experience including tandem mooring vessel above 150,000 DWTFamiliar with the area of operations, its navigational hazards and/or obstructions and its environmental conditions Familiar with the operation of terminal tugs Attended a minimum of six berthing/un-berthing operations and then performed a minimum of three berthing, un-berthing operations under supervision of an experienced terminal pilot<br>Technical Skills: Experience in SPM and Hoses Maintenance is a plus<br>Office Skills: Pack Office<br>Language: English preferred<br>Social Skills:Able to motivate and to unite employees working together around a common project Able to manage several issues simultaneously Able to work transversally and in synergy with the operational heads as well as with all concerned parties Good management / stress resistance / pressure Committed to vigorous quality and cost control Able to manage several issues simultaneously Able to take initiatives and decision Pays attention to details Force proposal Autonomy Planning Organization Rigor Reactivity Relational ease Teamwork Adaptability Initiative Force proposal Flexibility

Quick CV Drop Off<br><br>First Name<br><br>This is a required field<br><br>Last Name<br><br>This is a required field<br><br>Email Address<br><br>A valid email address is required This is a required field<br><br>Telephone Number<br><br>This is a required field<br><br>Job Type<br><br>3" title="Job Type" name="cvjobtypes" data-req="Required" data-isselected="false"> -- Please Select -- Contract Permanent<br><br>This is a required field<br><br>CV Upload<br><br>Choose File<br><br>You can only upload files up to 10 MB in size You can only upload doc, docx or pdf files This is a required field<br><br>I confirm that I have read and agree with Orion Group's Terms & Conditions, Privacy Policy & Cookie Policy<br><br>This is a required field<br><br>Back to results<br><br>Supervisor (Site)<br><br>Apply Now<br><br>CR/083233 Posted: 27/07/2026<br><br>Competitive Qatar, Ras Laffan Contract <br><br>We are seeking an experienced Supervisor (Site) – Dredging to oversee dredging, reclamation, marine, and port construction activities on a major EPC project in Qatar.<br><br>The successful candidate will ensure works are delivered safely, efficiently, and in compliance with project specifications, quality standards, environmental requirements, and project schedules.<br><br>Key Responsibilities<br><br>Supervise dredging, reclamation, breakwater, jetty, quay wall, and marine construction activities. Monitor contractor and subcontractor performance. Coordinate dredgers, barges, tugs, survey vessels, and marine equipment. Verify dredging quantities, excavation volumes, and reclamation progress. Ensure compliance with HSE, quality, and environmental standards. Coordinate hydrographic and topographic surveys. Prepare daily site progress reports. Identify construction constraints and implement corrective actions.<br><br>Requirements<br><br>Bachelor's Degree in Civil Engineering, Marine Engineering, Construction Engineering, or related discipline. Minimum 8 years of experience in:Dredging Marine construction Land reclamation Port construction Experience with:Cutter Suction Dredgers (CSD) Trailing Suction Hopper Dredgers (TSHD) Backhoe Dredgers Split Hopper Barges Survey vessels Previous EPC contractor or marine contractor experience. Middle East project experience is an advantage. Strong understanding of hydrographic surveys and dredging quantity calculations. Excellent communication and leadership skills.<br>People are our business worldwide<br><br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.<br><br>Alecz Palas Senior Recruitment Consultant<br><br>Share this<br><br>Apply for this role<br><br>First Name<br><br>This is a required field<br><br>Last Name<br><br>This is a required field<br><br>Telephone Number<br><br>This is a required field<br><br>Email Address<br><br>This is a required field A valid email address is required.<br><br>CV, Linked In or Dropbox URL<br><br>Select upload option CV Upload Linked In / Dropbox URL<br><br>This is a required field<br><br>CV Upload<br><br>Choose File<br><br>This is a required field<br><br>Linked In / Dropbox URL<br><br>This is a required field A valid Linked In URL is required, please ensure it begins with https://www.linkedin.com/ A valid Drop Box URL is required, please ensure it begins with https://www.dropbox.com/<br><br>Do you have a right to work in the country this role is located in?<br><br> Please Select -- Yes No<br><br>This is a required field<br><br>Message<br><br>By submitting this form you agree to our Terms & Conditions, Privacy Policy & Cookie Policy This is a required field<br><br>Not yet registered? Create an account today<br><br>Already have an account? Sign in now<br><br>Recruitment<br><br>Still Looking? What about.....<br><br>View All<br><br>Posted 27/07/2026<br><br>Engineering Project Manager – Medical Devices<br><br>TR/083240<br><br> $60 - $64 per hour United States, Illinois, Lake Bluff Contract <br><br>Engineering Project Manager – Medical Devices(QA Engineering Project Manager) Location: North Chicago, IL (Hybrid – Tuesday, Wednesday & Thursday onsite) Travel: Approximately 10–15% travel to Cost....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Project Coordinator – Operations & Supply Chain<br><br>TR/083239<br><br> $33 - $37 per hour United States, Illinois, Lake Bluff Contract <br><br>Project Coordinator – Operations & Supply Chain Location: North Chicago, IL (Hybrid) Schedule: Monday & Friday Remote | Tuesday–Thursday Onsite Duration: 4-month Initial Contract to start$33-$37/hr....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Lab Technician II<br><br>TR/083196<br><br> €18.08 per hour Netherlands, Provincie Noord-Holland, Haarlem Contract <br><br>Orion Group Life Sciences are looking for a Lab Technician II for our Multinational Pharmaceutical client based in Haarlem. Initial 6-month contract, with possibility of extension. This is a fully....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Head of Planning<br><br>CR/083231<br><br> Competitive Qatar, Doha Contract <br><br>We are seeking an experienced Head of Planning to lead project planning and scheduling activities for major EPC projects within the Oil & Gas industry. This leadership role is responsible for deve....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Control of Work Lead<br><br>CR/083224<br><br> £70 - £72.50 per hour England, North West, Greater Manchester, Carrington Contract <br><br>Job Purpose As Control of Work (CoW) Lead – CSU, you will be responsible for establishing, implementing, and overseeing the Control of Work framework for all Commissioning and Start-Up activities. ....<br><br>View Job<br><br>Posted 27/07/2026<br><br>QA/QC Engineer<br><br>CR/083221<br><br> Competitive Qatar, Doha Contract <br><br>We are seeking an experienced QA/QC Engineer to support major Oil & Gas EPC projects involving engineering, procurement, construction, inspection, testing, and project handover activities. The suc....<br><br>View Job<br><br>Back to results<br><br>Supervisor (Site)<br><br>Apply Now<br><br>CR/083233 Posted: 27/07/2026<br><br>Competitive Qatar, Ras Laffan Contract <br><br>We are seeking an experienced Supervisor (Site) – Dredging to oversee dredging, reclamation, marine, and port construction activities on a major EPC project in Qatar.<br><br>The successful candidate will ensure works are delivered safely, efficiently, and in compliance with project specifications, quality standards, environmental requirements, and project schedules.<br><br>Key Responsibilities<br><br>Supervise dredging, reclamation, breakwater, jetty, quay wall, and marine construction activities. Monitor contractor and subcontractor performance. Coordinate dredgers, barges, tugs, survey vessels, and marine equipment. Verify dredging quantities, excavation volumes, and reclamation progress. Ensure compliance with HSE, quality, and environmental standards. Coordinate hydrographic and topographic surveys. Prepare daily site progress reports. Identify construction constraints and implement corrective actions.<br><br>Requirements<br><br>Bachelor's Degree in Civil Engineering, Marine Engineering, Construction Engineering, or related discipline. Minimum 8 years of experience in:Dredging Marine construction Land reclamation Port construction Experience with:Cutter Suction Dredgers (CSD) Trailing Suction Hopper Dredgers (TSHD) Backhoe Dredgers Split Hopper Barges Survey vessels Previous EPC contractor or marine contractor experience. Middle East project experience is an advantage. Strong understanding of hydrographic surveys and dredging quantity calculations. Excellent communication and leadership skills.<br>People are our business worldwide<br><br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.<br><br>Alecz Palas Senior Recruitment Consultant<br><br>Share this<br><br>Apply for this role<br><br>First Name<br><br>This is a required field<br><br>Last Name<br><br>This is a required field<br><br>Telephone Number<br><br>This is a required field<br><br>Email Address<br><br>This is a required field A valid email address is required.<br><br>CV, Linked In or Dropbox URL<br><br>Select upload option CV Upload Linked In / Dropbox URL<br><br>This is a required field<br><br>CV Upload<br><br>Choose File<br><br>This is a required field<br><br>Linked In / Dropbox URL<br><br>This is a required field A valid Linked In URL is required, please ensure it begins with https://www.linkedin.com/ A valid Drop Box URL is required, please ensure it begins with https://www.dropbox.com/<br><br>Do you have a right to work in the country this role is located in?<br><br> Please Select -- Yes No<br><br>This is a required field<br><br>Message<br><br>By submitting this form you agree to our Terms & Conditions, Privacy Policy & Cookie Policy This is a required field<br><br>Not yet registered? Create an account today<br><br>Already have an account? Sign in now<br><br>Posted 27/07/2026<br><br>Engineering Project Manager – Medical Devices<br><br>TR/083240<br><br> $60 - $64 per hour United States, Illinois, Lake Bluff Contract <br><br>Engineering Project Manager – Medical Devices(QA Engineering Project Manager) Location: North Chicago, IL (Hybrid – Tuesday, Wednesday & Thursday onsite) Travel: Approximately 10–15% travel to Cost....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Project Coordinator – Operations & Supply Chain<br><br>TR/083239<br><br> $33 - $37 per hour United States, Illinois, Lake Bluff Contract <br><br>Project Coordinator – Operations & Supply Chain Location: North Chicago, IL (Hybrid) Schedule: Monday & Friday Remote | Tuesday–Thursday Onsite Duration: 4-month Initial Contract to start$33-$37/hr....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Lab Technician II<br><br>TR/083196<br><br> €18.08 per hour Netherlands, Provincie Noord-Holland, Haarlem Contract <br><br>Orion Group Life Sciences are looking for a Lab Technician II for our Multinational Pharmaceutical client based in Haarlem. Initial 6-month contract, with possibility of extension. This is a fully....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Head of Planning<br><br>CR/083231<br><br> Competitive Qatar, Doha Contract <br><br>We are seeking an experienced Head of Planning to lead project planning and scheduling activities for major EPC projects within the Oil & Gas industry. This leadership role is responsible for deve....<br><br>View Job<br><br>Posted 27/07/2026<br><br>Control of Work Lead<br><br>CR/083224<br><br> £70 - £72.50 per hour England, North West, Greater Manchester, Carrington Contract <br><br>Job Purpose As Control of Work (CoW) Lead – CSU, you will be responsible for establishing, implementing, and overseeing the Control of Work framework for all Commissioning and Start-Up activities. ....<br><br>View Job<br><br>Posted 27/07/2026<br><br>QA/QC Engineer<br><br>CR/083221<br><br> Competitive Qatar, Doha Contract <br><br>We are seeking an experienced QA/QC Engineer to support major Oil & Gas EPC projects involving engineering, procurement, construction, inspection, testing, and project handover activities. The suc....<br><br>View Job<br><br>Contact Us<br><br>Telephone<br><br>+44 (0)1463-230860<br><br>Find Us On Social<br><br>Quick Links<br><br> Home About Us Resources Locations Job Search Policies & Associations <br><br>Services<br><br> Completions & Commissioning Global Workforce Solutions Materials Management Recruitment Outsourcing Services Retained Search Talent Acquisition <br><br>Sectors<br><br> Construction & Infrastructure Life Science Manufacturing Oil & Gas Power & Utilities Renewables <br><br>2026 © Copyright Orion Group. All rights reserved.<br><br> All Policies Cookie Policy Privacy Statement Terms & Conditions HTML Sitemap <br><br>Site by Venn

Job Title<br><br>Lead Consultant - Pre-sales<br><br>Job Scope<br><br>The Lead Consultant - Pre-Sales is responsible for strategizing and coordinating with the sales team and other departments on all technical and business-critical issues. S/He serves as the technical and strategic authority, building strong relationships with vendors, partners and customers while driving the business through multiple initiatives and overseeing the Pre-Sales Consulting team.<br><br>Main Duties And Responsibilities<br><br>Oversee and mentor the Pre-Sales Consulting team, ensuring quality and consistency in pre-sales support across the organization Act as the go-to subject matter expert in technical/solution design for the assigned products/services portfolio Develop and implement specific accounts, product(s), service(s) and sales strategies for the team Lead in the qualification of opportunities, providing higher-level strategy and technical guidance throughout the sales lifecycle Manage, coordinate and provide oversight for proof of concepts (POC), request for proposals (RFP) and the technical aspects of deal closures Facilitate and lead technical sales calls and customer meetings at an executive level Evaluate the IT landscape, ensuring that the solutions provided are aligned with industry best practices and client needs Work with Sales, Services and other departments to align solutions with the overall business strategy Lead the sales bid process, including the preparation and review of RFIs, RFPs and RFQsDrive vendor relations and negotiate to procure the best solutions, balancing cost and quality Prepare and manage team performance metrics and KPIsStay updated on market trends, products and competitor landscapes and disseminate this knowledge to the team Implement and enforce the use of systems like CRM for efficient opportunity and deal management<br><br><br>Position Requirements<br><br>Education<br><br>Bachelor’s degree in Computer Engineering, Computer Science or any other related field<br><br>Experience<br><br>At least 4 to 5 years of relevant experience including management experience<br><br>Must be experienced in Dell Solution Portfolio (Storage/Backup Solutions/ Hyper Conversion etc.)<br><br> - JG1

<p>As a Kitchen &amp; Laundry Technician , you will be responsible for maintaining and servicing all kitchen and laundry equipment to the highest standards of excellence. Your role is critical to ensuring seamless operations across our culinary and housekeeping departments, directly supporting our commitment to exceptional guest experiences.</p><p>Inspect, maintain, and repair kitchen equipment including ovens, stoves, grills, refrigerators, freezers, dishwashers, and exhaust systems to premium operational standards</p><p>Maintain and service laundry equipment including washers, dryers, steamers, and ironers to ensure consistent quality and efficiency</p><p>Perform preventive maintenance according to established schedules to minimize equipment downtime and ensure uninterrupted service delivery</p><p>Respond promptly to urgent repair requests from kitchen and housekeeping departments to maintain guest satisfaction</p><p>Diagnose faults in electrical and mechanical systems and execute necessary repairs or recommend equipment replacements</p><p>Coordinate with specialized vendors for complex repairs and parts procurement to maintain equipment integrity</p><p>Ensure strict compliance with health, safety, and fire regulations related to all electrical and gas-powered appliances</p><p>Maintain comprehensive documentation of all maintenance activities and equipment service history for audit and compliance purposes</p><p>Assist in the installation and setup of new equipment when required</p><p>Maintain a clean, organized, and safe maintenance workshop and tool inventory</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Instrument Technician</b>. Our client is a reputed organization in the Industrial sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Perform instrument loop checking activities.<br></li><li>Carry out calibration of field instruments.<br></li><li>Execute instrumentation construction activities.<br></li><li>Install, test and commission instrumentation systems.<br></li><li>Troubleshoot instrument faults and ensure system reliability.<br></li><li>Follow project specifications and safety standards.<br></li><li>Coordinate with engineering and maintenance teams.<br></li><li>Maintain calibration and inspection records.<br></li></ul>Required Skills<br><ul><li>Loop Checking – Hands-on commissioning experience.<br></li><li>Instrument Calibration – Accurate calibration of field devices.<br></li><li>Industrial Instrumentation – Maintenance and installation knowledge.<br></li><li>Oil &amp; Gas / Power Plant Experience – Industrial project exposure.<br></li><li>Construction Activities – Instrument installation and testing.<br></li></ul>Preferred Skills<br><ul><li>Commissioning experience.<br></li><li>Knowledge of HSE practices.<br></li><li>Reading P&amp;ID and instrumentation drawings.<br></li></ul>Work Experience Requirements<br><p>Minimum <b>3+ years</b> of experience in loop checking, calibration and instrumentation construction activities in Oil &amp; Gas, Power Plant, Shipyard or similar industrial sectors.<br></p><br>Education<br><ul><li><b>Minimum:</b> ITI / Diploma<br></li><li><b>Preferred:</b> Diploma in Instrumentation/Electrical<br></li><li><b>Additional Certifications:</b> Instrument Calibration or Safety Certifications (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Survival Equipment and Avionics Controller is responsible for ensuring that all off aircraft maintenance work is performed to approve data and quality standards. Reporting to the Deputy Depth Maintenance Manager for the organisation, administration, control and efficiency of the Part 145 Bay Operations The post holder will be an experienced and skilled technician undertaking a range of detailed maintenance activities on an aircraft or aircraft component, demonstrating the ability to derive diagnostic techniques. Responsible for maintaining airworthiness through appropriate task delegation and authorisation on an aircraft or aircraft component. Responsible for tasking of work &amp; supervision of personnel/people management. Responsible for meeting agreed delivery targets at a tactical level. Demonstrates people management and leadership skills. Demonstrates awareness of broader external dependencies and identifies areas for continuous improvement. Core Activity High level of survival equipment and avionics knowledge is required Initial set up of aircraft bays Responsible for ensuring that all off aircraft maintenance work is performed to approved data and quality standards. Reporting to the Deputy Depth Maintenance Manager for the organisation, administration, control and efficiency of the Part 145 Bay Operations Ensuring that all required regulatory and company standards of quality are achieved for all tasks carried out in the maintenance organisation Requires the ability to think and plan tactically to respond to the constantly changing environment in terms of Customer and product changes/customisation, therefore, it also demands the capability to organise resource balancing/training to meet changing standards Provide Information, Statistics and Data as required for input to the Operational Performance Review Supervising the team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider programme Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately Ensuring that staff are sufficiently competent and approved for the maintenance tasks allocated to them. Maintain personal &amp; teams task authorisation for working on an aircraft or components in accordance with AMC requirements Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management Provide guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR s, supports and sponsors training requests including on the job training . Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information Maintaining personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign QEAF personnel s Log Books as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission. Oversight of HMSS repairs and maintenance Provide reporting and oversight to QEAF consolidation activites with Pt145 Off Aircraft workshops Key Accountabilities Performance indicators Ensure the effective management of Regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Represents the Maintenance Manager at management reviews, where necessary. Responsible for the assessment of escalated issues for any impact on Continuing Airworthiness and generating effective resolution, or sponsoring escalation to management, as appropriate Procedure/standards Comply with the Regulatory Framework, its associated procedures and standards, and any other company procedures and standards. Identify and propose changes as required Safety Management System Understand and apply Human Factors and Error Management philosophies are applied to all Maintenance activities. Understand the risks associated with Maintenance activities and the means by which they are mitigated and managed Management System Assurance Ensure Maintenance activities are compliant with the QAF Regulatory and Assurance framework, including supporting Process Confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness Statutory/Regulatory &amp; Legislative requirements Able to demonstrate an appropriate level of understanding and application of the relevant Continuing Airworthiness Regulatory Framework. Support the implementation of any Regulatory driven changes into the Maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO, etc Contractual Requirements Comply with all applicable contractual requirements Requirements Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (On a/c requirement) Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of Expositions and Functionally Mandated Procedures Management training. PDR training / experience Strong customer awareness with experience of his culture, ethos, policies, capabilities and processes such that the individual has gravitas with the Customer. Relevant Engineering degree or equivalent Fully experienced and competent in hands-on Customer Support by providing a complete service in the context of maximising gain for the Company Strong people management and motivational skills Operational and business management, especially within the aircraft maintenance environment Knowledge of managing and implementing effective safety management systems (SMS) in aircraft or off aircraft related environment Human Factors- Standard Course Specification. E&amp;PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. IT Literate</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (On a/c requirement) Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of Expositions and Functionally Mandated Procedures Management training. PDR training / experience Strong customer awareness with experience of his culture, ethos, policies, capabilities and processes such that the individual has gravitas with the Customer. Relevant Engineering degree or equivalent Fully experienced and competent in hands-on Customer Support by providing a complete service in the context of maximising gain for the Company Strong people management and motivational skills Operational and business management, especially within the aircraft maintenance environment Knowledge of managing and implementing effective safety management systems (SMS) in aircraft or off aircraft related environment Human Factors- Standard Course Specification. E&amp;PW Awareness- Standard Course Specification. ITAR Awareness- Standard Course Specification. IT Literate</p><p></p></section>

Job Description:We are seeking a seasoned Project Manager to lead transformational, national-scale initiatives in the financial and tax domains. You will manage multi-year, multi-million-dollar programs spanning digital tax systems, e-invoicing frameworks, legal harmonization, and national stakeholder engagement—ensuring alignment with strategic national goals. Key Responsibilities:Project Planning & Execution: Lead the planning, execution, and successful delivery of multi-year mega projects, ensuring alignment with national priorities. Develop and manage project plans, communication plans, and an escalation matrix to address issues and stakeholder expectations. Day-to-Day Project Management: Oversee the day-to-day operations of demanding, large-scale projects, ensuring effective coordination across workstreams, including:Information Systems: Oversee the development and implementation of TAX and e-invoicing systems. Legal Frameworks: Ensure projects comply with national tax laws and financial regulations. Awareness Campaigns: Lead national campaigns designed to increase public awareness of TAX systems and e-invoicing frameworks. National Rollout Management: lead the phased implementation of national tax reform initiatives, ensuring alignment across technical, legal, and public engagement workstreams, with strict adherence to timelines and performance milestones. Task Breakdown & Work Packages: Break down large-scale tasks into manageable work packages for efficient execution, tracking, and delivery. RACI Matrix Management: Define and manage a RACI matrix (Responsible, Accountable, Consulted, Informed) to clarify roles and responsibilities across all project stakeholders. Risk & Issue Management: Identify and manage project risks and issues proactively, ensuring mitigation strategies are in place and timely resolutions are achieved to keep the project on track. Stakeholder Communication: Maintain strong, clear communication with key stakeholders, including government bodies, legal teams, IT departments, and external consultants, providing regular updates on project progress. Budget & Resource Management: Manage multi-million-dollar project resources, ensuring budgets are adhered to and resources are allocated efficiently. Escalation Management: Handle escalations and conflict resolution to keep projects on schedule and within scope. Reporting & Progress Tracking: Monitor project progress, ensuring deliverables are completed on time and to the required quality standards, providing regular status updates to senior management and stakeholders. Qualifications:Bachelor’s Degree in Project Management, Business Administration, Computer Information Systems, Management Information Systems, Computer Science, or a related field (Master’s preferred). PMP/Prince2 certification or equivalent is highly desirable.15+ years of experience managing large, complex projects in the financial, tax, or public sectors. ERP experience is preferable. Proven experience implementing national financial and tax regulations, including e-invoicing mandates. TAX systems, e-invoicing frameworks is plus. Proven experience in rolling out national agenda projects over multiple years, with a track record of managing projects of significant scope and scale. Ability to work effectively in demanding project environments, handling day-to-day project management tasks, including the development of project plans, communication plans, and an escalation matrix. Strong ability to deconstruct complex initiatives into actionable work packages using best practices in RACI, risk mitigation, and stakeholder alignment. Strong understanding of risk and issue management, with the ability to develop mitigation strategies and handle complex project risks. Excellent stakeholder management skills with a proven ability to coordinate diverse entities, including government, legal, and IT teams. Preferred Experience:Experience in managing national-level projects, particularly in the financial or taxation sectors. Expertise in delivering multi-year national agenda rollouts and implementing financial systems and regulations at a national scale. Experience with awareness campaigns targeting national audiences. Knowledge of information systems integration related to Fin Tech and public sector solutions.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently hiring an <b>ICS / OT Cybersecurity Technician</b> to support operations within a dynamic <b>Oil &amp; Gas / Petrochemical environment in Qatar</b>. This is a hands-on, field-intensive role responsible for maintaining, securing, and supporting Industrial Control Systems (ICS), Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), and Operational Technology (OT) assets. The role requires close coordination with operations, maintenance, and cybersecurity teams to ensure the availability, integrity, and security of critical industrial systems.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Perform preventive and corrective maintenance on OT/ICS cybersecurity assets and infrastructure.</li><li>Apply security patches, antivirus updates, and software upgrades for DCS, SIS, and ICS systems.</li><li>Support backup, restoration, and disaster recovery activities for critical OT systems.</li><li>Install, replace, configure, and troubleshoot cybersecurity appliances, field devices, network equipment, and power/network cabling.</li><li>Maintain ICS cabinets, workstations, servers, KVM systems, and associated infrastructure.</li><li>Perform endpoint hardening, security baseline implementation, and access control validation activities.</li><li>Support vulnerability remediation and routine OT cybersecurity maintenance activities.</li><li>Collect, verify, and maintain OT asset inventories, configuration records, and as-built documentation.</li><li>Monitor system health and identify operational or cybersecurity-related issues.</li><li>Prepare Permit to Work (PTW) documentation and coordinate maintenance activities with site teams.</li><li>Assist in incident investigation, troubleshooting, and resolution of OT cybersecurity events.</li><li>Ensure compliance with company cybersecurity policies, operational procedures, and industry best practices.</li></ul><p><br></p><p><b>Qualifications &amp; Experience</b></p><p><br></p><p><b>Years of Experience:</b> Minimum 3 years of experience in ICS/OT Cybersecurity within Oil &amp; Gas, Petrochemical, Chemical Manufacturing, or similar industrial environments.</p><p><br></p><p><b>Preferred Experience:</b> 5+ years of relevant experience supporting industrial control systems and cybersecurity operations.</p><p><br></p><p><b>Education:</b> Graduate Degree or 3-Year Diploma in:</p><ul><li>Electrical Engineering</li><li>Instrumentation Engineering</li><li>Automation Engineering</li><li>Mechatronics Engineering</li><li>Computer Science</li><li>Information Technology</li><li>Cybersecurity</li><li>Electronics Engineering</li><li>Hands-on experience with DCS, SIS, PLC, SCADA, and other industrial control systems.</li><li>Experience supporting cybersecurity technologies in OT environments.</li><li>Familiarity with industrial networking and communication protocols.</li><li>Experience working within live production environments and critical infrastructure facilities.</li><li>Knowledge of OT cybersecurity standards and best practices is an advantage.</li></ul><p><br></p><p><b>Certifications (Preferred)</b></p><p><b>Networking Certifications</b></p><ul><li>CCNA</li><li>CompTIA Network+</li></ul><p><b>Cybersecurity Certifications</b></p><ul><li>Certified Ethical Hacker (CEH)</li><li>CompTIA Security+</li><li>CompTIA CySA+</li></ul><p><b>At least one cybersecurity certification is highly desirable.</b></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Skills &amp; Competencies</b></p><ul><li>Strong exposure to OT/ICS cybersecurity environments.</li><li>Experience in Oil &amp; Gas, Petrochemical, or Chemical Manufacturing industries.</li><li>Knowledge of DCS, SIS, PLC, SCADA, and industrial automation systems.</li><li>Understanding of cybersecurity maintenance, endpoint protection, and system hardening.</li><li>Strong troubleshooting and problem-solving skills.</li><li>Experience with asset management and technical documentation.</li><li>Excellent communication and coordination skills.</li><li>Ability to work independently and collaboratively with multidisciplinary teams.</li><li>Ability to work safely within a 24/7 industrial operating environment.</li><li>Strong commitment to operational reliability, safety, and cybersecurity compliance.</li></ul><p><br></p></div>

About QNB<br><br>Established in 1964 as the country’s first Qatari-owned commercial bank, QNB Group has steadily grown to become the largest bank in the Middle East and Africa (MEA) region.<br><br>QNB Group’s presence through its subsidiaries and associate companies extends to more than 31 countries across three continents providing a comprehensive range of advanced products and services. The total number of employees is more than 28,000 serving up to 20 million customers operating through 1,000 locations, with an ATM network of 4,300 machines.<br><br>QNB has maintained its position as one of the highest rated regional banks from leading credit rating agencies including Standard & Poor’s (A), Moody’s (Aa3) and Fitch (A+). The Bank has also been the recipient of many awards from leading international specialised financial publications.<br><br>Based on the Group’s consistent strong financial performance and its expanding international presence, QNB currently ranks as the most valuable bank brand in the Middle East and Africa, according to Brand Finance Magazine.<br><br>QNB Group has an active community support program and sponsors various social, educational and sporting events.<br><br>Job Purpose Summary<br><br>The incumbent is primarily responsible for managing and overseeing In-House and Distributed Applications related projects and development team. The incumbent will also help select the best development platform and ensure that user requirements are provided for by the latest and most effective tools available in the IT market.<br><br>Essential Duties & Responsibilities By Dimensions<br><br> Shareholder & Financial: Carefully analyze possible software and application program changes to ensure congruence with the Group’s long<br><br>term planning and approved strategy.<br><br> Design, implement, document and develop applications as per the specified budget and plan. Implements KPI’s and best practices for In-House and Distributed Applications System Analysis Promote cost consciousness and efficiency and enhance productivity, to minimise cost, avoid waste, and optimise<br><br>benefits for the bank.<br><br> Act within the limits of the powers delegated to the incumbent. Customer (Internal & External): Liaise with the concerned business for their information requirements and follow-up as and when required to<br><br>answer their business needs.<br><br> To assist customers in all their queries on Bank’s product and seek solution to their requests. Maintain activities in accordance with Service Level Agreements (SLAs) with internal departments/units to achieve<br><br>improvements in turn-around time.<br><br> Build and maintain strong/effective relationships with related departments/units to achieve the Group’s objectives. Provide timely/accurate data to external/internal Auditors, Compliance, Financial Control and Risk when required. Internal (Processes, Products, Regulatory): Develop new applications as per user requirements and the plan specified by the designated systems analysts. Correct bugs and errors by making appropriate changes and then perform unit testing to the program to ensure that the desired results are produced. Conduct trial runs/ perform testing of programs and software applications to be sure they will produce the desired information and that the instructions are correct. Compile and document the program and perform subsequent revisions, inserting comments in the coded instructions so others can understand the program. Perform revision, repair, or expansion of existing programs to increase operating efficiency or adapt to new requirements. Write, analyze, review, and rewrite programs, using workflow chart and diagram, and applying knowledge of computer capabilities, subject matter, and symbolic logic. Write or contribute to instructions or manuals to guide end users. Investigate whether networks, workstations, the central processing unit of the system, and/or peripheral<br><br>equipment are responding to a program's instructions.<br><br> Prepare detailed workflow charts and diagrams that describe input, output, and logical operation, and convert<br><br>them into a series of instructions coded in a computer language.<br><br> Perform systems analysis and programming tasks to maintain and control the use of system’s software. Consult with and assist computer operators or system analysts to define and resolve problems in running computer programs. Comply with existing standards and policies as set by the Group’s management. Use object-oriented programming languages, as well as client/server applications development processes and multimedia and Internet technology. Abide by the Policies and Procedures developed for maintaining the Information Security for the Data Centre Operations and shall take on active responsibilities in achieving, managing and maintaining the ISO 27001 standard Learning & Knowledge: Fully understand user requirements as provided by the business analysts. Possess knowledge of system design and data dictionary concepts in order to properly develop a workable and comprehensive application. Possess and implement the development life cycle followed with in the Group. Identify areas for professional development of self and act to enhance professional development. Proactively identify areas for professional development of self and undertake development activities. Seek out opportunities to remain current with all developments in professional field.<br><br>Education/Experience Requirements<br><br> Bachelor’s degree in Computer Science. At least 8 years’ experience in financial services with a specialization in web or mobile application development. Knowledge in . Net and Oracle PL/SQL Analyze and improve architecture of existing systems to ensure that they meet the latest industry standard technology requirements. Ability to design secure, highly scalable, end-to-end software solutions for complex implementations. Training courses and certification in systems technology, programming and banking software. Specific courses in IT security Architecture for web applications.<br><br>Note: you will be required to attach the following:<br><br>Resume/CVPassport Educational Certificates QID (Back and Front) Birth Certificate

<p><strong>Job Summary</strong> The High Voltage (HV) Technician is responsible for the installation, operation, inspection, preventive maintenance, troubleshooting, and repair of high-voltage electrical systems and equipment. The role ensures the safe and reliable operation of transformers, switchgear, substations, generators, and associated electrical distribution systems while complying with company procedures, electrical standards, and HSE regulations.</p><p><br></p><p><strong>Duties & Responsibilities :</strong></p><ul><li><p>Operate, inspect, and maintain high-voltage electrical systems (11kV, 33kV, or higher as applicable).</p></li><li><p>Perform preventive, predictive, and corrective maintenance on HV switchgear, transformers, circuit breakers, motors, cables, and substations.</p></li><li><p>Troubleshoot electrical faults using electrical drawings, test equipment, and diagnostic tools.</p></li><li><p>Carry out isolation, Lock Out Tag Out (LOTO), and permit-to-work procedures before maintenance activities.</p></li><li><p>Conduct insulation resistance, continuity, earth resistance, and functional testing using approved testing instruments.</p></li><li><p>Inspect HV panels, busbars, relays, protection systems, and electrical connections for defects.</p></li><li><p>Monitor transformer oil levels, temperatures, cooling systems, and protection devices.</p></li><li><p>Perform switching operations in accordance with approved procedures and authorization levels.</p></li><li><p>Maintain accurate maintenance records, inspection reports, and equipment history.</p></li><li><p>Assist during commissioning, shutdowns, and major maintenance activities.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or ITI in Electrical Engineering or Electrical Technology.</p></li><li><p>High Voltage Authorization/Competency Certificate (preferred).</p></li><li><p>Minimum <strong>5 years</strong> of experience in high-voltage electrical maintenance.</p></li><li><p>Experience in industrial plants, oil & gas, facilities management, utilities, power generation, or large commercial facilities.</p></li><li><p>Hands-on experience with transformers, HV switchgear, substations, and protection systems.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: The Electrical Technician is responsible for the installation, inspection, maintenance, troubleshooting, and repair of low-voltage and high-voltage electrical systems and equipment. The role ensures safe, reliable, and efficient operation of electrical infrastructure in compliance with safety regulations and company standards.</p><br><p>Key Responsibilities</p><ul><li><p>Perform preventive and corrective maintenance on low-voltage (LV) and high-voltage (HV) electrical systems.</p></li><li><p>Inspect, test, troubleshoot, and repair electrical equipment, switchgear, transformers, motors, generators, and control panels.</p></li><li><p>Monitor electrical systems to identify faults and potential hazards.</p></li><li><p>Install, maintain, and repair wiring, conduits, circuit breakers, and related electrical components.</p></li><li><p>Conduct routine testing and calibration of electrical equipment.</p></li><li><p>Respond promptly to electrical emergencies and breakdowns.</p></li><li><p>Ensure compliance with electrical safety standards, lockout/tagout (LOTO) procedures, and regulatory requirements.</p></li><li><p>Maintain accurate maintenance records, reports, and documentation.</p></li><li><p>Coordinate with engineers, supervisors, and other maintenance staff during repairs and projects.</p></li><li><p>Support commissioning and startup activities for new electrical installations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Diploma or Technical Certification in Electrical Engineering, Electrical Technology, or a related field.</p></li><li><p>Minimum 5 years of experience in electrical maintenance of LV and HV systems.</p></li><li><p>Experience with transformers, switchgear, generators, UPS systems, and motor control centers </p></li><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Familiarity with electrical safety standards and regulations.</p></li><li><p>Ability to use electrical testing instruments and diagnostic tools.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Summary</strong></p><p>The HVAC Technician is responsible for the inspection, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems. The role requires strong hands-on experience with Package Air Conditioning Units and the ability to ensure optimal system performance, reliability, and energy efficiency while complying with safety standards.</p><p><strong>&nbsp;</strong></p><p><strong>&nbsp;</strong></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Perform preventive and corrective maintenance on HVAC systems, including Package AC Units, Split AC Units, AHUs, FCUs, and ventilation systems.</p></li><li><p>Diagnose and repair mechanical, electrical, and refrigeration faults.</p></li><li><p>Conduct routine inspections and performance testing of HVAC equipment.</p></li><li><p>Troubleshoot issues related to compressors, motors, thermostats, controls, refrigerant circuits, and electrical components.</p></li><li><p>Monitor and maintain refrigerant levels and ensure leak detection and repairs are carried out as required.</p></li><li><p>Clean and replace filters, belts, coils, and other HVAC components.</p></li><li><p>Respond promptly to equipment breakdowns and emergency maintenance requests.</p></li><li><p>Maintain accurate records of maintenance activities, repairs, and equipment performance.</p></li><li><p>Ensure compliance with safety procedures, environmental regulations, and company standards.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>ITI, Diploma, Technical Certificate, or equivalent qualification in HVAC, Refrigeration</p></li><li><p>Minimum 4 years of experience in HVAC maintenance.</p></li><li><p>Strong hands-on experience in the maintenance and troubleshooting of Package AC Units is mandatory.</p></li><li><p>Experience working in industrial facilities, commercial buildings, camps, hospitals, hotels, or large-scale facilities is preferred.</p></li></ul><p><strong>&nbsp;</strong></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Summary</strong> The Kitchen Equipment Technician is responsible for the installation, inspection, maintenance, troubleshooting, and repair of commercial kitchen equipment to ensure safe, efficient, and uninterrupted operations. The role involves working with a wide range of electrical, mechanical, gas, and refrigeration-based kitchen appliances. <br><strong>Key Responsibilities</strong></p><ul><li><p>Install, maintain, and repair commercial kitchen equipment such as ovens, stoves, fryers, grills, steamers, dishwashers, refrigerators, freezers, and food preparation equipment.</p></li><li><p>Diagnose electrical, mechanical, gas, and refrigeration faults and perform corrective maintenance.</p></li><li><p>Conduct preventive maintenance inspections and servicing according to established schedules.</p></li><li><p>Troubleshoot equipment breakdowns and respond promptly to maintenance requests.</p></li><li><p>Replace defective parts and ensure equipment operates efficiently and safely.</p></li><li><p>Test equipment after repairs to verify proper functionality and compliance with safety standards.</p></li><li><p>Maintain accurate records of maintenance activities, repairs, and spare parts usage.</p></li><li><p>Ensure compliance with health, safety, and environmental regulations.</p></li><li><p>Coordinate with vendors and suppliers for specialized repairs and spare parts procurement.</p></li><li><p>Provide technical support and guidance to kitchen staff on proper equipment operation and care.</p></li><li><p>Monitor equipment performance and recommend upgrades or replacements when necessary.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Diploma or Technical Certificate in Mechanical, Electrical, Refrigeration, HVAC, or a related field.</p></li><li><p>Minimum 4 years of experience in maintaining and repairing commercial kitchen equipment.</p></li><li><p>Knowledge of electrical systems, gas appliances, refrigeration systems, and mechanical equipment.</p></li></ul><p></p></section>

About QNB<br><br>Established in 1964 as the country’s first Qatari-owned commercial bank, QNB Group has steadily grown to become the largest bank in the Middle East and Africa (MEA) region.<br><br>QNB Group’s presence through its subsidiaries and associate companies extends to more than 31 countries across three continents providing a comprehensive range of advanced products and services. The total number of employees is more than 28,000 serving up to 20 million customers operating through 1,000 locations, with an ATM network of 4,300 machines.<br><br>QNB has maintained its position as one of the highest rated regional banks from leading credit rating agencies including Standard & Poor’s (A), Moody’s (Aa3) and Fitch (A+). The Bank has also been the recipient of many awards from leading international specialised financial publications.<br><br>Based on the Group’s consistent strong financial performance and its expanding international presence, QNB currently ranks as the most valuable bank brand in the Middle East and Africa, according to Brand Finance Magazine.<br><br>QNB Group has an active community support program and sponsors various social, educational and sporting events.<br><br>Job Purpose Summary<br><br>The incumbent is primarily responsible for managing and overseeing In-House and Distributed Applications related projects and development team. The incumbent will also help select the best development platform and ensure that user requirements are provided for by the latest and most effective tools available in the IT market.<br><br>Essential Duties & Responsibilities By Dimensions<br><br> Shareholder & Financial: Carefully analyze possible software and application program changes to ensure congruence with the Group’s long<br><br>term planning and approved strategy.<br><br> Design, implement, document and develop applications as per the specified budget and plan. Implements KPI’s and best practices for In-House and Distributed Applications System Analysis Promote cost consciousness and efficiency and enhance productivity, to minimise cost, avoid waste, and optimise<br><br>benefits for the bank.<br><br> Act within the limits of the powers delegated to the incumbent. Customer (Internal & External): Liaise with the concerned business for their information requirements and follow-up as and when required to<br><br>answer their business needs.<br><br> To assist customers in all their queries on Bank’s product and seek solution to their requests. Maintain activities in accordance with Service Level Agreements (SLAs) with internal departments/units to achieve<br><br>improvements in turn-around time.<br><br> Build and maintain strong/effective relationships with related departments/units to achieve the Group’s objectives. Provide timely/accurate data to external/internal Auditors, Compliance, Financial Control and Risk when required. Internal (Processes, Products, Regulatory): Develop new applications as per user requirements and the plan specified by the designated systems analysts. Correct bugs and errors by making appropriate changes and then perform unit testing to the program to ensure that the desired results are produced. Conduct trial runs/ perform testing of programs and software applications to be sure they will produce the desired information and that the instructions are correct. Compile and document the program and perform subsequent revisions, inserting comments in the coded instructions so others can understand the program. Perform revision, repair, or expansion of existing programs to increase operating efficiency or adapt to new requirements. Write, analyze, review, and rewrite programs, using workflow chart and diagram, and applying knowledge of computer capabilities, subject matter, and symbolic logic. Write or contribute to instructions or manuals to guide end users. Investigate whether networks, workstations, the central processing unit of the system, and/or peripheral<br><br>equipment are responding to a program's instructions.<br><br> Prepare detailed workflow charts and diagrams that describe input, output, and logical operation, and convert<br><br>them into a series of instructions coded in a computer language.<br><br> Perform systems analysis and programming tasks to maintain and control the use of system’s software. Consult with and assist computer operators or system analysts to define and resolve problems in running computer programs. Comply with existing standards and policies as set by the Group’s management. Use object-oriented programming languages, as well as client/server applications development processes and multimedia and Internet technology. Abide by the Policies and Procedures developed for maintaining the Information Security for the Data Centre Operations and shall take on active responsibilities in achieving, managing and maintaining the ISO 27001 standard Learning & Knowledge: Fully understand user requirements as provided by the business analysts. Possess knowledge of system design and data dictionary concepts in order to properly develop a workable and comprehensive application. Possess and implement the development life cycle followed with in the Group. Identify areas for professional development of self and act to enhance professional development. Proactively identify areas for professional development of self and undertake development activities. Seek out opportunities to remain current with all developments in professional field.<br><br>Education/Experience Requirements<br><br> Bachelor’s degree in Computer Science. At least 8 years’ experience in financial services with a specialization in web or mobile application development. Knowledge in . Net and Oracle PL/SQL Analyze and improve architecture of existing systems to ensure that they meet the latest industry standard technology requirements. Ability to design secure, highly scalable, end-to-end software solutions for complex implementations. Training courses and certification in systems technology, programming and banking software. Specific courses in IT security Architecture for web applications.<br><br>Note: you will be required to attach the following:<br><br>Resume/CVPassport Educational Certificates QID (Back and Front) Birth Certificate

Responsibilities<br><br>Conduct regular inspections of facilities and equipment to identify maintenance and repair needs Preparing the necessary reports to be shared with Clients Decision maker skills require Full experience in SLA and priorities Able to understand the Drawings and SLD, Riser etc. (CAD drawings) Full knowledge about the SOP & O&M , Standards (IEEE, ASHREA , ETC.) Experience in Escalation procedures. Full Knowledge about the Electrical, Mechanical, HVAC, Plumbing, chilled water system,Lead a supervisors & Technicians to perform the required work as per schedule and PPM Prepare all necessary materials required for the required maintenance systems Experience in CAFM Systems for CM, PPM, Job Plan, checklist, Tools. Coordinate and oversee maintenance and repair activities, including routine maintenance, repairs, and upgrades Develop and implement preventive maintenance programs to ensure the ongoing reliability and safety of our facilities Create and maintain accurate records of maintenance and repair activities Ensure compliance with safety regulations and industry standards Identify opportunities for cost savings and efficiency improvements in facility operations Collaborate with internal teams, contractors, and vendors to coordinate facility-related projects Respond to facility emergencies and resolve issues in a timely manner <br><br>Requirements<br><br>Bachelor's degree in mechanical engineering, Electrical Engineering, or a related field Minimum of 4 years of experience in facility management or a similar role Knowledge of building systems and maintenance best practices Strong problem-solving and analytical skills Ability to work independently and prioritize tasks effectively Excellent communication and interpersonal skills Fluent in speaking Arabic and English Proficiency in computer applications related to facility management Knowledge of safety regulations and compliance standards

Job Summary We are seeking an experienced Application Support Specialist to provide end-to-end functional and technical support for the bank’s omni-channel applications, including branch banking web applications, mobile banking, retail internet banking, and corporate internet banking platforms. The role will be responsible for BAU support, incident and service request management, application monitoring, log analysis, preliminary RCA, release and deployment support, and coordination with development, QA, infrastructure, and business teams to ensure stable and reliable application operations. Key Responsibilities1. Application & BAU Support Handle BAU support emails, user queries, service requests, and incidents. Analyze, prioritize, troubleshoot, and resolve application issues. Ensure timely ticket updates and adherence to defined SLAs and compliance requirements. Escalate complex issues to development, infrastructure, or relevant technical teams.2. Application Monitoring & Troubleshooting Monitor application error logs, health logs, and performance metrics. Use App Dynamics (App D) or similar APM tools for application monitoring. Identify application anomalies, recurring incidents, and potential risks. Perform preliminary Root Cause Analysis (RCA) and document findings. Monitor dashboards and proactively identify issues before they impact users.3. Deployment & Release Management Support weekend deployments, application releases, and change activities. Perform functional and technical validation after deployments. Verify application availability and stability following releases. Coordinate with relevant teams during release and change windows.4. Technical & Infrastructure Support Participate in patch management, Disaster Recovery (DR) drills, database upgrades, and infrastructure activities. Perform application validation during DR exercises and technical maintenance. Support troubleshooting activities involving application, database, and Linux environments.5. Database & Application Support Perform basic troubleshooting using Oracle SQL and MySQL. Execute queries for data lookup, validation, and issue investigation. Review application logs and perform basic technical analysis. Use basic knowledge of Java, Java Script, and HTML to understand and troubleshoot application issues.6. Agile & Dev Ops Collaboration Participate in Agile ceremonies including stand-ups, sprint discussions, and retrospectives. Work closely with development, QA, infrastructure, Dev Ops, and business teams. Support Dev Ops-aligned release and operational processes. Contribute to continuous improvement of application support processes. Required Qualifications Bachelor's degree in Computer Science, Information Technology, or a related field. Experience in application support, production support, or IT operations. Strong analytical and troubleshooting skills. Ability to perform preliminary RCA and identify recurring issues. Good verbal and written communication skills. Ability to work effectively with cross-functional teams. Willingness to support weekend deployments and extended hours during critical releases. Required Technical Skills Oracle SQL & MySQLLinux/Unix servers and basic Linux commands Java – basic understanding Java Script – basic understanding HTML – basic understanding App Dynamics (App D) or similar APM/monitoring tools Application log monitoring and troubleshooting Incident and Service Request management Release and deployment support Patch management and DR support Preferred Skills Banking / Financial Services experience Omni-channel banking application experience Mobile Banking Retail Internet Banking Corporate Internet Banking Branch Banking applications API integrations and microservices Service Now, JIRA, Remedy, or similar ticketing systems Knowledge of Agile and Dev Ops practices Key Competencies Application troubleshooting Incident management Preliminary RCAProactive monitoring Problem-solving Attention to detail Ownership and accountability Customer-centric approach Team collaboration Ability to manage multiple priorities Strong communication skills

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>We are&nbsp; currently looking for Business Analyst - Core Banking - Finastra EQUATION for our Qatar operations</p><br><p>Education / Experience Requirements:</p><br><p>• Bachelor’s degree in Finance/ Computer Science, MIS, Engineering, Business Administration or a related technical field.</p><br><p>• Should have a minimum of continuous 5 or more years of experience in ‘Finastra EQUATION’ Core Banking System, support, and implementation.</p><br><p>• Reviewing BRS (Business Requirements Specifications) and prepare the Function Specification for development and/or test cases exploring all aspects of the scope.</p><br><p>• Business process analysis and mapping.</p><br><p>• Defect life cycle Management and execution status reporting.</p><br><p>• Experience in test scope analysis and regression testing.</p><br><p>• Understanding of Systems integration with Core Banking systems.</p><br><p>• In-depth experience in Core banking system and loan administration systems.</p><br><p>• Ensure high standards of data protection and confidentiality.</p><br><p>• Provide technical assistance in identifying, evaluating and developing systems and procedures across the group various business and support functions.</p><br><p>• Consult and coordinate with systems analysts and programmers to design and develop business systems.</p><br><p>• Track and document changes to business specifications.</p><br><p>• Create and assist others in the writing of user documentation, instruction, procedures, and training.</p><br><p>• Prepare systems business cycle specifications and manage output and controls of calculations and postings.</p><br><p>• Actively participate in meetings which aim to assess performance as well as the department’s overall performance on a regular basis.</p><br><p>• Answer questions about applications for all team members, as well as internal and external customers.</p><br><p>Required Skills:</p><br><p>• In-depth and high competence in ‘Finastra EQUATION’ Core Banking System</p><br><p>• Excellent oral and written communication skills in both English, Arabic is preferable.</p><br><p>• Possess strong computer software MS Office (Word, Excel, etc.) skills.</p><br><p>• Excellent time management skills and ability to work in a deadline-oriented environment.</p><br><p>• Team work and integration with reporting hierarchy.</p><br><p>• Customer service oriented.</p><br><p>• Strictly adhere to banks ethics and code of conduct.</p><br><p>• Ability perform under pressure and meet deadlines.</p><br><p>• Ability to effectively interact at all levels in the bank and Vendor contacts.</p><br><p>• Planning and organizing ability.</p><br><p>• Handling assigned task with commitment and responsibility.</p><br><p>• Ensure high standards of data protection and confidentiality.</p><br><p>Joining time frame: 2 weeks (maximum 1 month)</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Cleaning Technician (CT) is responsible for performing custodial services as specified in the Performance Work Statement for Base and Recreational Service areas such as the Lodging facilities, Fitness Centers, Lounges, Community Activity Centers, Learning Resource Center, Media Center, Theaters and Hospital Aseptic. The CT reports to the Lead Cleaning Technician and functions as a Facility Manager. Responsibilities + Responsible for the execution of custodial services as specified in the Performance Work Statement. + Responsible for communicating and upholding company standards, leading by example, working as a team and providing well maintained equipment and facilities. + Shall perform work in a manner that presents a clean, neat and professional appearance while maintaining satisfactory facility and equipment conditions. + Responsible for monitoring other country nationals in accordance with AFCENTI 32-1002 and obtain escort badge. + Performs custodial work including, but not limited to, restroom cleaning and supply replenishment, floors, baseboards, corners and wall/floor edges, light fixtures, interior glass/mirrors, sink and counter, laundry rooms, tables/desks, water potted plants, dusting, spot cleaning, outdoor patio cleaning, collect/remove trash, clean refrigerators/microwaves, sort linen, resupply clean linen, and restock linen closet as specified in the PWS. + Shall function as a Facility Manager to assigned location(s) as specified in the PWS. + Shall provide on-call and over and above cleaning services as needed. + Responsible for maintaining a safe, clean, sanitary, healthy, presentable, professional atmosphere, free of dust, clutter and trash in all working facilities and areas. + Responsible for following a comprehensive, flexible, and properly documented training program. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Responsible for precise execution of company time reporting procedures and accurate completion of timesheet. + Shall perform as supplemental personnel as needed for all Installation Service functional areas. + Performs other duties as assigned. Qualifications + Minimum Qualifications + Education/Certifications: + High school diploma or equivalent. + Must have a valid Passport. + Must be able to read, write, speak and understand English fluently. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DoD provided protective gear. + Experience + A minimum of one year of general cleaning experience. + Shall be familiar with applicable fire prevention, ground safety, smoking, and security standards. + Skills + Good communication, teamwork and customer service skills. + Must be familiar with Microsoft programs such as Excel, Word, Power Point and Outlook. + Able and willing to work periods of long hours to meet mission requirements + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. + Working Environment + Work will be inside and outside. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Receptionist is the initial point of contact for visitors, clients, and employees, providing assistance, information, and administrative support. The role is responsible for greeting guests, answering phone calls, and managing inquiries in a professional and courteous manner. Additionally, Receptionists may perform various administrative tasks, such as scheduling appointments, handling correspondence, and maintaining office records. Their role is essential in creating a positive first impression and ensuring smooth communication and operations within an organization.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Greet and welcome visitors, clients, and employees as they arrive at the office, providing a friendly and professional first point of contact.</p><br> <p>Answer and direct incoming phone calls to the appropriate individuals or departments, taking messages as necessary.</p><br> <p>Manage the reception area, ensuring it is clean, organized, and presentable at all times.</p><br> <p>Respond to inquiries from visitors and callers, providing information about the organization, its services, and directions as needed.</p><br> <p>Schedule appointments, meetings, and conference rooms for staff and clients, coordinating calendars and sending reminders.</p><br> <p>Handle incoming and outgoing mail, packages, and deliveries, distributing them to the appropriate recipients.</p><br> <p>Assist with administrative tasks such as typing, filing, photocopying, and faxing documents.</p><br> <p>Maintain office supplies inventory, placing orders as needed to ensure adequate stock levels.</p><br> <p>Assist with special projects or events as assigned by management, contributing to the overall efficiency and effectiveness of the office.</p><br> <p>Uphold security protocols by monitoring access to the premises and ensuring that visitors sign in and wear identification badges when required.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Familiarity and working knowledge of general office machines (i.e. fax, copier, printers, etc.)</p><br> <p>required.</p><br> <p>Knowledge on phone etiquette.</p><br> <p>Good Communication (oral and written) in English.</p><br> <p>Possess good understanding and knowledge in document control and management </p><br> <p>Proficient in computer systems, applications and programs</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 3 year(s) working experience, 2 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>Guest Relations L2<br>Calendar Maintenance L2<br>Clerical/Administrative L2<br>Travel Arrangements L2<br>Reception L2<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br>High School Diploma<br>Bachelor's Degree in any related field<br><br><br><br> </div>