Car painter Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><ul><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>Principal: Qatar District Cooling Company</p><p>Country: Doha, Qatar</p><p>Qualifications: Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</li><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li><li>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</li><li>Supervise, guide and monitor work done by external vendors.</li><li>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</li><li>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</li><li>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</li><li>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</li><li>Work effectively with other team members, including engineers, supervisors, and external vendors.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li><li>Where applicable, provide assistance and support to other team members, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li><li>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary<p>We are looking for a talented <strong>Art Director</strong> to join our Creative Department. The ideal candidate will possess strong conceptual thinking, exceptional visual design skills, and the ability to develop and execute creative advertising campaigns.</p><br><br><br>Key Responsibilities<ul><li>Develop and execute creative concepts for advertising campaigns.</li><li>Lead visual direction from concept through final execution.</li><li>Collaborate with copywriters, designers, and creative teams to deliver compelling creative solutions.</li><li>Participate in brainstorming sessions and creative ideation.</li><li>Present creative concepts and visual directions to clients and internal stakeholders.</li><li>Ensure all creative work aligns with client objectives and brand guidelines.</li><li>Guide and support junior designers and creative team members.</li><li>Coordinate with production teams and external partners to ensure quality deliverables.</li><li>Manage multiple creative projects while meeting deadlines.</li><li>Stay updated with design trends, technologies, and industry best practices.</li></ul>Qualifications &amp; Experience<ul><li>Bachelor's degree in Graphic Design, Visual Communication, Fine Arts, Advertising, Multimedia Arts, Digital Media Design, or a related field.</li><li>Minimum <strong>3-5 years of experience</strong> in an advertising agency with a strong creative portfolio.</li><li>Demonstrated experience in concept development and campaign execution.</li><li>Experience leading or mentoring junior creatives.</li><li>Strong organisational, communication, and presentation skills.</li><li>Ability to manage multiple projects and client relationships simultaneously.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Carry out preventive and corrective maintenance on mechanical equipment.</p><p>• Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><p>• Maintain RO plant equipment including:</p><p>o High-pressure pumps</p><p>o Booster pumps</p><p>o Pressure vessels</p><p>o RO skids and membranes</p><p>o Filters and strainers</p><p>o Chemical dosing systems</p><p>o Valves and actuators</p><p>o Heat exchangers</p><p>o Cranes and lifting equipment</p><p>• Perform equipment alignment, lubrication, and condition monitoring.</p><p>• Participate in commissioning, startup, and shutdown activities.</p><p>• Assist in root-cause analysis of equipment failures.</p><p>• Complete maintenance reports and update CMMS/work orders.</p><p>• Coordinate with operations, electrical, and instrumentation teams.</p><p>• Follow permit-to-work procedures and HSE requirements.</p><p>• Respond to emergency breakdowns and plant call-outs when required.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p><p>• 3–5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p><p>• Experience with RO desalination systems is preferred.</p><p>• Knowledge of rotating and static equipment maintenance.</p><p>• Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p><p>• Familiarity with maintenance management systems (CMMS).</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Minimum qualification: <b>10th Pass / High School</b><br><b>2–3 years of experience</b> as Technical Helper in <b>Rolling Mill / Steel Industry / Heavy Industrial environment</b><br>Must be able to <b>read, write, and speak English (Mandatory)</b><br>Physically fit and able to work in <b>high-temperature industrial plant conditions</b><br>Basic understanding of <b>steel production and rolling mill operations</b><br>Knowledge of <b>safety procedures and PPE usage in industrial sites</b><br>Valid Qatar ID preferred<br>Immediate availability preferred<br>Interested candidates can share their cvs to 31313903/ bency@madre-me.com<br></span><br><span>RequirementsAssist operators and technicians in <b>rolling mill operations</b><br>Support in <b>handling raw materials, billets, rods, and steel products</b><br>Perform <b>material movement, loading, unloading, and stacking activities</b><br>Assist in <b>machine setup, basic adjustment, and operational support</b><br>Carry out <b>housekeeping and cleaning of work area and machinery</b><br>Support in <b>gas cutting, slinging, hammering, and material preparation tasks</b><br>Follow all <b>safety rules, PPE requirements, and HSE standards</b><br>Report any <b>equipment faults, hazards, or abnormalities to supervisors</b><br>Assist in <b>maintenance support activities during shutdown or breakdowns</b><br>Coordinate with team members for <b>smooth production flow in rolling operations</b><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Shall be able to perform all the tasks of mechanical maintenance department. Following are the few listed jobs but not limited to</li> <li>Perform and assist preventive maintenance, corrective maintenance and overhauling of all the mechanical equipment of power plant.</li> <li>Should have knowledge of different types of valves, pumps, compressors, turbines, heat recovery steam generators, pipelines, pipe hangers, steam traps and all other mechanical equipment.</li> <li>Shall be able to perform inspection/maintenance of tanks, heat recovery steam generators, MSF evaporators, condensers, etc.</li> <li>Should have knowledge of special tools, hydraulic tools, pneumatic tools, power tools, lifting gears and hand tools.</li> <li>Should be proactive in nature.</li> </ul><br><ul> <li>Minimum 08 years of experience required in the large industry out of those 04 years shall be in power plant and or desalination plant.</li> <li>Able to Read, Write and Speak in English</li> <li>Shall have knowledge of various mechanical equipment, overhauling/maintenance.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><p>Chillers</p><p>Process Area of FCU, AHU, and Ventilation System</p><p>Refrigerant recovery, recycling and purifying System</p><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Job Description: JOB PURPOSE / OBJECTIVE Understand, evaluate, and maintain various types of Instrumentation related data for the facility through SPI INTools. KEY ACCOUNTABILITIES Facility changes and modifications. • Ensure that instrumentation related deliverables are updated in SPI INTools as part of the facility change process within a stipulated timeframe and per company. Process Safety Information Policy and Management of Change (MOC) requirements. • Timely updating of PSI Instrumentation deliverables like Instrument Index, Specification sheets, Junction Box & Panel Wiring drawings, Interconnection diagrams, Loop drawings, Alarm & Trip Set Controller summary, I/O assignments etc. • Verify the changes on Instrumentation data as part of the facility change and integration including field verification as and when required. • Responsible to provide updated SPI INTools related information for the ongoing facility Project Engineering, operation, and maintenance. • Create and maintain new instrumentation data into SPI INTools as part of facility engineering requirements. • Issuance and maintenance of entire instrument tags in the plant through INTools without having any duplication. Administration of SPI INTools database • Work closely with IT & SPI INTools Contractor for the SPI System administration for data initialization, data backup, data security, and data recovery and SPI INTools periodic upgrade. • Provide support for bulk data extraction, data retrieval, various SPI INTools Report functionalities, management of users, groups, domains, user profiles, user training, software license renewal, etc. Quality, Health, Security, Safety and Environment • Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Instrument and Electrical Section to guarantee employee safety and delivery of high-quality products/services. Reporting • Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Instrumentation Engineering. • Preferred: Bachelor’s Degree in Instrumentation Engineering. Experience • Required: 3-5 years of experience in the O&G Industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Hands-on experience in using SPI INTools Languages • Required: English - Proficient. • Preferred: Arabic - Working knowledge. WORKING RELATIONSHIPS Internal • Operations and Technical • Base load technicians External • Contractors and third-party service providers • Consultants and advisors</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Execute instrumentation and control pre-commissioning and commissioning activities.</span><br><span>Perform loop checking, continuity testing, signal verification, and functional testing.</span><br><span>Calibrate pressure, temperature, flow, and level instruments.</span><br><span>Test and commission transmitters, switches, control valves, actuators, sensors, and analyzers.</span><br><span>Perform control valve stroking and functional checks.</span><br><span>Troubleshoot instrument, wiring, signal, communication, and control-system faults.</span><br><span>Verify installations against P&amp;IDs, loop diagrams, hook-up drawings, datasheets, and wiring diagrams.</span><br><span>Support testing of PLC, DCS, ESD, fire and gas, and other control systems.</span><br><span>Use HART communicators, loop calibrators, pressure calibrators, and related test equipment.</span><br><span>Complete calibration sheets, loop folders, commissioning checklists, and test reports.</span><br><span>Follow PTW, LOTO, isolation, and HSE procedures.</span><br></span><br><span>Requirements<span>Diploma, ITI, or technical qualification in Instrumentation, Electronics, or Control Engineering.</span><br><span>Minimum 5 years of relevant instrumentation experience.</span><br><span>Proven hands-on experience in instrumentation and control commissioning is mandatory.</span><br><span>Candidates with only construction or installation experience will not be considered.</span><br><span>Strong experience in loop testing, calibration, functional testing, and troubleshooting.</span><br><span>Ability to read P&amp;IDs, loop diagrams, hook-up drawings, and wiring diagrams.</span><br><span>Familiarity with PLC, DCS, ESD, fire and gas, transmitters, and control valves.</span><br><span>Fluent in spoken and written English.</span><br><span>Experience in Oil &amp; Gas and desalination projects will be highly preferred.</span><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>* Perform preventive, predictive, and corrective maintenance on electrical equipment and systems.</p><br><br><p>* Troubleshoot and repair:</p><br><br><p>o Motors and pumpso Motor Control Centers (MCCs)</p><br><br><p>o Variable Frequency Drives (VFDs)o Switchgear and transformers</p><br><br><p>o Power distribution systems (LV/MV)</p><br><br><p>o PLC and SCADA-related electrical components</p><br><br><p>* Inspect, test, and maintain electrical panels, breakers, relays, and control circuits.</p><br><br><p>* Assist in plant start-up, shutdown, and commissioning activities.</p><br><br><p>* Monitor plant electrical performance and identify potential failures.</p><br><br><p>* Read and interpret electrical drawings, single-line diagrams, and wiring schematics.</p><br><br><p>* Ensure compliance with safety procedures, lockout/tagout (LOTO), and permit-to-work systems.</p><br><br><p>* Coordinate with operations, mechanical, and instrumentation teams to minimize downtime.</p><br><br><p>* Maintain maintenance records, reports, and spare-parts inventory.</p><br><br><p>* Support emergency breakdown maintenance on a shift basis.<br></p><br><br>Skills<p>* Diploma / ITI / Technical Certificate in Electrical Engineering or Electrical Technology.</p><br><br><p>* 3-5 years (or as specified) of industrial electrical maintenance experience.</p><br><br><p>* Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><br><br><p>* Knowledge of:</p><br><br><p>o PLC systemso SCADA systemso VFDs</p><br><br><p>o MCCso LV/MV electrical systems</p><br><br><p>o Electrical safety standards and procedures.</p><br><br><br><p>Typical Equipment Maintained</p><br><br><p>* High-pressure RO pumps</p><br><br><p>* Feed water pumps</p><br><br><p>* MCC panels</p><br><br><p>* Transformers</p><br><br><p>* Generators and UPS systems</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Perform preventive, predictive, and corrective maintenance on electrical equipment and systems.</p><p>• Troubleshoot and repair:</p><p>o Motors and pumps</p><p>o Motor Control Centers (MCCs)</p><p>o Variable Frequency Drives (VFDs)</p><p>o Switchgear and transformers</p><p>o Power distribution systems (LV/MV)</p><p>o PLC and SCADA-related electrical components</p><p>• Inspect, test, and maintain electrical panels, breakers, relays, and control circuits.</p><p>• Assist in plant start-up, shutdown, and commissioning activities.</p><p>• Monitor plant electrical performance and identify potential failures.</p><p>• Read and interpret electrical drawings, single-line diagrams, and wiring schematics.</p><p>• Ensure compliance with safety procedures, lockout/tagout (LOTO), and permit-to-work systems.</p><p>• Coordinate with operations, mechanical, and instrumentation teams to minimize downtime.</p><p>• Maintain maintenance records, reports, and spare-parts inventory.</p><p>• Support emergency breakdown maintenance on a shift basis.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma / ITI / Technical Certificate in Electrical Engineering or Electrical Technology.</p><p>• 3–5 years (or as specified) of industrial electrical maintenance experience.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><p>• Knowledge of:</p><p>o PLC systems</p><p>o SCADA systems</p><p>o VFDs</p><p>o MCCs</p><p>o LV/MV electrical systems</p><p>o Electrical safety standards and procedures.</p><p><br></p><p>Typical Equipment Maintained</p><p>• High-pressure RO pumps</p><p>• Feed water pumps</p><p>• MCC panels</p><p>• Transformers</p><p>• Generators and UPS systems</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>Monitor the activities of the outsourced Operation and Maintenance (O&amp;M) Contractor at site by reviewing daily reports, calibration reports, maintenance activities/reports, and Quality Control (QC) activities performed to ensure proper operation of the stations. Ensure property and equipment are secure. Verify that the spare parts interchanged by the contractor are original and as per approved specifications. Control all operational and maintenance activities at the ambient air quality stations and ensure all control systems related to the ambient air quality networks. Review and evaluate data to detect possible abnormalities related to the functioning of the stations and report to the section for further action. Keep records of all station inventories, data, reports, logs, and certificates to ensure traceability of results generated. Maintain systems to track schedules for maintenance, calibrations, and re-certifications on a timely basis and verify compliance by the Contractor. Report HSE statistics of the Contractors on a monthly basis. During emergencies, be available 24x7 and participate in incident investigations and provide ambient air quality and meteorological data to the investigating team. In case of incidents, ensure movement of the mobile monitoring AAQM station to the incident location by obtaining proper permits and securing power supply, etc. Accompany and assist the Technical Systems and Performance Audit Contractor during scheduled audits. Conduct independent first-party internal audits to verify AAQM station performance. Make regular station visits to oversee overall station functions (e.g., AC maintenance, generator tests, pest control, and general maintenance of the stations). Raise SAP requests and coordinate with the maintenance division for overall station maintenance. Maintain and raise SAP requests for troubleshooting Air Quality Modelling Servers.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electronics / Instrumentation / Meteorology / Environmental / Science (Chemistry, Physics) or equivalent qualification. Minimum of 5 years Ambient Air Quality Monitoring-related experience, preferably directly related to the O&amp;M activities of Ambient Air Quality Stations. Possess a valid Qatar driving license. Professional certification or license from a credible meteorological, environmental, or related association/society is an advantage. Technical understanding of air quality monitoring and environmental/meteorology requirements is essential. Upper Intermediate English (QP Level 6). Proven ability to organize and perform responsibilities with minimum supervision.</p>

<p>Job Description: JOB PURPOSE / OBJECTIVE Understand, evaluate, and maintain various types of Instrumentation related data for the facility through SPI INTools. KEY ACCOUNTABILITIES Facility changes and modifications. • Ensure that instrumentation related deliverables are updated in SPI INTools as part of the facility change process within a stipulated timeframe and per company. Process Safety Information Policy and Management of Change (MOC) requirements. • Timely updating of PSI Instrumentation deliverables like Instrument Index, Specification sheets, Junction Box & Panel Wiring drawings, Interconnection diagrams, Loop drawings, Alarm & Trip Set Controller summary, I/O assignments etc. • Verify the changes on Instrumentation data as part of the facility change and integration including field verification as and when required. • Responsible to provide updated SPI INTools related information for the ongoing facility Project Engineering, operation, and maintenance. • Create and maintain new instrumentation data into SPI INTools as part of facility engineering requirements. • Issuance and maintenance of entire instrument tags in the plant through INTools without having any duplication. Administration of SPI INTools database • Work closely with IT & SPI INTools Contractor for the SPI System administration for data initialization, data backup, data security, and data recovery and SPI INTools periodic upgrade. • Provide support for bulk data extraction, data retrieval, various SPI INTools Report functionalities, management of users, groups, domains, user profiles, user training, software license renewal, etc. Quality, Health, Security, Safety and Environment • Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Instrument and Electrical Section to guarantee employee safety and delivery of high-quality products/services. Reporting • Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Instrumentation Engineering. • Preferred: Bachelor’s Degree in Instrumentation Engineering. Experience • Required: 3-5 years of experience in the O&G Industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Hands-on experience in using SPI INTools Languages • Required: English - Proficient. • Preferred: Arabic - Working knowledge. WORKING RELATIONSHIPS Internal • Operations and Technical • Base load technicians External • Contractors and third-party service providers • Consultants and advisors</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>JOB PURPOSE:</strong> Steer and train an emergency brigade. Coordinate an internal commission of accidents prevention. Prepare and review security and maintenance procedures. Provide technical support next to the government ministry. Manage all industrial health activities, such as measurements preparation of reports and files and attendance and destination of industrial residues. Provide support to state and security activities. Maintain a direct relationship with public organs involved with administration area. Help security supervisor in contracts management of services rendered (companies, fire equipment, auxiliary and vigilance maintenance).</p><p>KEY ACCOUNTABILITIES</p><p>Health, Safety, and Environmen: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Document Management: Maintain files and records. Document Preparation: Use standard office software to carry out basic formatting of letters, memoranda, and routine reports Internal Communications: Create positive experiences for clients by interacting courteously with them. Quality Assurance: Perform relatively simple quality sampling and inspection of products or processes (or both) Training development and delivery: Help develop training courses either by gathering standard data or by preparing materials using established procedures, formats, and templates Operational Compliance: Follow a range of mandatory procedures to ensure that work is carried out to the required quality standards and/ or to ensure adherence to external regulatory codes and internal codes of conduct. Personal Capability Building: Develop and maintain excellent procedural or technical skills by participating in assessment and development planning activities as well as formal and informal training and coaching Insights and Reporting: Perform basic data reporting tasks to support others by using established procedures. Policy Development and Implementation: Support others by carrying out simple policy-related tasks and following established procedures.</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Gender"> <b>Gender</b> </div> <div class="col is-9 p5" data-automation-id="data_Gender"> Male </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>WE ARE HIRING – MULTIPLE POSITIONS</span><br></p><br><span><b>URGENT HIRING – Pipe Fitter / Pipe Fabricator / Structural Fabricator</b></span><br><p><b>Responsibilities:</b><br></p><br><ul><li>Perform installation, fabrication, assembly, and maintenance activities for piping systems and structural steel works as per project specifications.<br></li><li>Carry out pipe cutting, beveling, grinding, fit-up, alignment, and installation of pipes, valves, fittings, and supports.<br></li><li>Fabricate pipe spools, structural supports, platforms, beams, columns, and other steel structures as per approved drawings.<br></li><li>Read and interpret P&amp;IDs, isometric drawings, fabrication drawings, and structural drawings.<br></li><li>Perform marking, cutting, drilling, grinding, assembly, and dimensional checking activities.<br></li><li>Ensure proper alignment, leveling, fit-up, and quality of fabricated components.<br></li><li>Coordinate with welders, supervisors, QC inspectors, riggers, and other site teams.<br></li><li>Follow PTW, LOTO, PPE, and all site safety requirements during work execution.<br></li><li>Maintain good housekeeping and comply with project quality and HSE standard<br></li></ul><br><span>Requirements</span><p><b>Requirements:</b><br></p><br><ul><li>ITI / Diploma / Technical qualification in Mechanical, Fabrication, or related trade.<br></li><li>Minimum 3–5 years of relevant experience in Oil &amp; Gas, Petrochemical, Refinery, or Industrial projects.<br></li><li>Hands-on experience in pipe fitting, pipe spool fabrication, and structural steel fabrication works.<br></li><li>Ability to read and understand piping isometric drawings, P&amp;IDs, and fabrication drawings.<br></li><li>Knowledge of pipe materials, fittings, valves, supports, and structural steel components.<br></li><li>Experience in carbon steel, stainless steel, and alloy piping systems is preferred.<br></li><li>Good knowledge of site safety practices and industrial work procedures.<br></li><li>Immediate joiners preferred.<br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</p><p>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</p><p>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</p><p>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</p><p>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</p><p>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</p><p>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</p><p>Generate technical layouts and technical reports.</p><p>Understand and implement the basis of the Computer Maintenance Management Systems</p><p>Perform thermo graphic and analysis for the electrical equipment.</p><p>Provide assistance and guidance to other technical teams, whenever required</p><p>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>