Car painter Jobs

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p><b>Responsibilities:&nbsp;</b></p><p><br></p><p>To inspect, clean, maintain, and repair all mechanical and plumbing installations and systems. Maintains all lighting throughout hotel/retail. To maintain all HVAC units. To maintain all motor, belts, bearings, etc. To maintain all shop tools and equipment. To assist the Security Manager to maintain the Life Safety machinery and equipment, all mechanicals such as pumps and emergency diesel. Troubleshoot and repair all equipment that is non-operational. Do all necessary welding as required. Do all work orders pertain to the hotel. Assist other trades as required/retail Answer all calls and does repairs, if unable to do repairs, must notify the supervisor of the problem. Perform chemical test for boilers, chillers, swimming pool, etc. Operate BMS computer system. Is part of the fire response team, also on standby in the event of any emergencies. Does preventative maintenance as schedule by Engineering Office. Contact vendors and order necessary replacement/repair parts. Maintain adequate stock of parts/materials in the maintenance shop. Creatively resolve electrical/mechanical issues in order to keep the machinery operational. Computer skills (Word, Excel, Power Point) Ability to troubleshoot mechanical and electrical (PLC), make adjustments, and products changer-over, in a timely manner. To observe cleanliness at the place of work and on the job after completion of work. To ensure cleanliness of appearance and uniform, particularly when working in guest areas. To maintain the reading of water supply.</p><p><strong>Desired Candidate Profile</strong></p><p>Your experience and skills include: Relevant building maintenance experience is an asset Strong interpersonal and problem solving abilities Highly responsible &amp; reliable</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 235347 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Cargo &amp; Airport Operations <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-26</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Preventive &amp; Corrective Maintenance</p><p>• Perform routine preventive and predictive maintenance on field instruments.</p><p>• Troubleshoot instrumentation and control system failures.</p><p>• Repair and replace defective instruments and control components.</p><p>• Maintain calibration records and maintenance reports.</p><p><br></p><p>Instrumentation Work</p><p>• Install, calibrate, and test:</p><p>o Pressure transmitters</p><p>o Flow meters</p><p>o Level transmitters</p><p>o Temperature instruments</p><p>o Conductivity analyzers</p><p>o pH analyzers</p><p>o Chlorine analyzers</p><p>o Turbidity analyzers</p><p>• Perform loop checking and signal verification.</p><p><br></p><p>Control &amp; Automation Systems</p><p>• Maintain and troubleshoot PLC, RTU, HMI, SCADA, DCS, and control panels.</p><p>• Assist in commissioning and startup activities.</p><p>• Support control valve testing, tuning, and maintenance.</p><p>• Diagnose communication and network-related control issues.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Technical Certificate in:</p><p>o Instrumentation Engineering</p><p>o Electronics Engineering</p><p>o Electrical Engineering</p><p>o Automation Technology</p><p>• Additional certifications in PLC/SCADA or instrumentation are advantageous.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall be able to perform all the tasks of mechanical maintenance department. Following are the few listed jobs but not limited to</p><p>Perform and assist preventive maintenance, corrective maintenance and overhauling of all the mechanical equipment of power plant.</p><p>Should have knowledge of different types of valves, pumps, compressors, turbines, heat recovery steam generators, pipelines, pipe hangers, steam traps and all other mechanical equipment.</p><p>Shall be able to perform inspection/maintenance of tanks, heat recovery steam generators, MSF evaporators, condensers, etc.</p><p>Should have knowledge of special tools, hydraulic tools, pneumatic tools, power tools, lifting gears and hand tools.</p><p>Should be proactive in nature.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 08 years of experience required in the large industry out of those 04 years shall be in power plant and or desalination plant.</p><p>Able to Read, Write and Speak in English</p><p>Shall have knowledge of various mechanical equipment, overhauling/maintenance.</p><p></p></section>

<p>Electrical Engineer responsible for reviewing technical specifications, schematics, and automation documents, preparing protection diagrams, validating transformer applications, and ensuring system integration. The role also involves vendor/tender evaluation, client collaboration, factory acceptance testing, and supporting sales/margin optimization through engineering efficiency.</p><p>Your role</p><ul><li>Specification Study: Conduct detailed studies of project specifications to ensure alignment with client requirements and technical standards.</li><li>Control &amp; Protection Schematic Review: Review control and protection schematic drawings from partner units to ensure accuracy and functionality.</li><li>SAS Document Review: Analyze System Automation Schematics (SAS) documents, including Functional Design Specifications, SAS Architecture, GTP, and BOQ.</li><li>Substation Equipment Review: Evaluate primary and secondary substation switchgear/equipment schematics, focusing on coordination with protection schematics.</li><li>Protection SLD Preparation: Prepare Single Line Diagrams (SLD) for protection systems, ensuring compliance with client specifications.</li><li>CT/CVT/PT Application Checks: Perform application checks and calculations for Current Transformers (CT), Capacitor Voltage Transformers (CVT), and Potential Transformers (PT) with respect to protective relays and protection functions.</li><li>Cable Philosophy &amp; Interconnection Schedules: Develop and review cable philosophies and interconnection schedules to ensure system integration.</li><li>Tender &amp; Vendor Review: Review tender/vendor offers related to Control &amp; Relay (C&amp;R) panels to ensure technical compatibility and cost-efficiency.</li><li>Client Interaction: Collaborate with clients for the approval of engineering drawings and documents.</li><li>Sales &amp; Margin Optimization: Achieve sales targets and improve gross margins through effective engineering optimization.</li><li>Factory Acceptance Testing (FAT): Conduct Factory Acceptance Testing (FAT) for electrical equipment such as transformers, current transformers, and voltage transformers to ensure product quality and performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering or related field.</p><p>5+ years of experience in electrical engineering, particularly in protection systems and substation design.</p><p>Proficient in reviewing control and protection schematics and technical documents.</p><p>Knowledge of SAS systems, CT, CVT, PT applications, and relay protection functions.</p><p>Strong attention to detail and problem-solving skills.</p><p>Experience with client discussions and document approvals.</p><p>Experience in factory acceptance testing and vendor offer evaluation.</p><p>Ability to work collaboratively in a team and manage deadlines effectively.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Coordinates with end users, providing technical support for lectures, conferences, live broadcasts and internal and external events. Develops, implements and maintains technology in accordance with college requirements. Coordinates with vendors on technical proposals and assesses fitment with user requirements. Assists with projects or new purchase requirements by creating technical documents and assessments to facilitate decision making. Design and produces project documentation, which includes schematics and as-built drawings. Meets with customers to understand technical requirements for upcoming events, and provides appropriate AV solutions, including rigging/de-rigging of AV setup. Develops and maintains custom programs, connectivity schematics, training and technical support for room automation systems. Facilitates AV convergence and troubleshoots technical issues methodically in collaboration with other ITS teams as required. Provides training to end users for technology usage and creates user manuals for end users as required. Customizes existing programming and design of audiovisual systems, room automation system, and teleconference and video conferencing systems to suit new user requirements. Provides technical expertise in capturing, editing and deploying recorded educational material. Keeps abreast of the latest technology in the field of AV. Performs other related duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree with 5 plus years of relevant experience. Certified Technology Specialist (CTS ) certification preferred. Working knowledge and experience with technologies such as PTZ cameras, Camcorder, Panopto for recording and editing purposes. Extensive knowledge and ability to support teams with set up PowerPoint presentations, Zoom and MS Teams. Good communication and customer service skills provide rational support to clients. Excellent organizational skills with the ability to prioritize tasks and keep calm under pressure. Strong problem-solving and analytical skills with an eye for detail. Ability to work both independently and as a part of the team. Provides technical AV support for college events both on-site and off-site. Standard business hours with frequent evening, weekend, and early-morning work based operational needs.</p><p></p></section>

<p>Principal: Qatar District Cooling Company Country: Doha, Qatar</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment: 1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints) 2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints) 3. Air Compressor 4. AHU fans and blower 5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels 6. Mechanical forklift 7. Mechanical manlift 8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers) Supervise, guide, and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.&nbsp;<br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br>Safety and Security<br>Use proper equipment, wear appropriate personal protective clothing (PPE), and employ correct lifting procedures, as necessary, to avoid injury.<br>Complete appropriate safety training and certifications to perform work tasks.<br>Follow Hazardous Material Management Program procedures for handling and disposing of chemicals, fertilizer, pesticides, blood borne pathogens, etc., including using Material Safety Data Sheets (MSDS).<br>Report work related accidents, or other injuries immediately upon occurrence to manager/supervisor.<br>Follow policies and procedures for the safe operation and storage of tools, equipment, and machines.<br>Identify and correct unsafe work procedures or conditions and/or report them to management and security/safety personnel.<br>Follow property specific procedures for handling emergency situations (e.g., evacuations, medical emergencies, natural disasters).<br>Follow company and department safety and security policies and procedures to ensure a clean, safe, and secure environment.<br>Policies and Procedures<br>Protect the privacy and security of guests and coworkers.<br>Protect company tools, equipment, machines, or other assets in accordance with company policies and procedures.<br>Follow company and department policies and procedures.<br>Ensure uniform, nametags, and personal appearance are clean, hygienic, professional and in compliance with company policies and procedures.<br>Maintain confidentiality of proprietary materials and information.<br>Perform other reasonable job duties as requested by Supervisors.<br>Guest Relations<br>Actively listen and respond positively to guest questions, concerns, and requests using brand or property specific process (e.g., LEARN, PLEASED, Guest Response, LEAP) to resolve issues, delight, and build trust.<br>Address guests' service needs in a professional, positive, and timely manner.<br>Thank guests with genuine appreciation and provide a fond farewell.<br>Welcome and acknowledge each and every guest with a smile, eye contact, and a friendly verbal greeting, using the guest's name when possible.<br>Communication<br>Speak to guests and co-workers using clear, appropriate and professional language.<br>Discuss work topics, activities, or problems with coworkers, supervisors, or managers discreetly and quietly, avoiding public areas of the property.<br>Working with Others<br>Support all co-workers and treat them with dignity and respect.<br>Quality Assurance/Quality Improvement<br>Comply with quality assurance expectations and standards.<br>Physical Tasks<br>Reach overhead and below the knees, including bending, twisting, pulling, and stooping.<br>Move up and down a ladder.<br>Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination.<br>Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance.<br>Stand, sit, or walk for an extended period of time or for an entire work shift.<br>Install, Maintain, and Repair Items<br>Ensure that all flammable materials are stored in OSHA and EPA approved containment devices.<br>Maintain Building and Property<br>Report any serious maintenance problems, unusual findings, or safety hazards immediately to the manager/supervisor.<br>Painting/Carpentry<br>Apply paint, stain, varnish, enamel, and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers while maintaining property color scheme specifications.<br>Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.<br>Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting.<br>Cover surfaces with drop cloths or masking tape and paper for protection during painting and post appropriate paint signs.<br>Clean up and store paint and painting tools and equipment in appropriate areas.<br>Coordinate with vendor in order to modify colors of paint, stain, or varnish with oil, thinning, and drying additives in order to obtain desired colors and consistencies.<br>Education: Technical, Trade, or Vocational School Degree<br>Related Work Experience: At least 1 year of related work experience<br>Supervisory Experience: No supervisory experience is required<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</span> </div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

Primary Purpose Of The Job<br><br>Carry out highly skilled maintenance, repair and overhaul of Rotary equipment and Minor/routine maintenance of static equipment installed at Qatar Energy Refinery process units i.e. Refinery 1 & 2, RFCC, Condensate Refinery, Utilities/Off sites, Tank Farm, Berth#6, BSV3 and Station C1 at Hamad Intl. Airport (HIA).<br><br>Required Experience And Skills<br><br>Minimum of level 5 in English communication skills (oral/written). Extensive knowledge of Mechanical Rotary equipment. Ability to work in a multinational environment. Minimum of 8 years experience in Refinery/Oil& Gas/Petrochemical plants. Must have experience in Pumps (Single & Multistage), Steam/Gas Turbines, centrifugal & Reciprocating Compressors, Turbo machinery etc. Capable of using computer for creating permits in RIS, preferably having knowledge & experience of using SAP & MS Office (Word & Excel)<br><br>Educational Qualifications<br><br>Qualified with a Diploma/Certificate in Mechanical Technology from a recognized institution.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Execute electrical pre-commissioning and commissioning activities.</span><br><span>Perform insulation resistance, continuity, phase sequence, functional, and operational tests.</span><br><span>Test transformers, switchgear, MCCs, motors, cables, panels, UPS systems, and electrical distribution equipment.</span><br><span>Identify and troubleshoot electrical faults.</span><br><span>Carry out cable checking, termination, glanding, and rectification activities.</span><br><span>Perform electrical isolation and de-isolation in accordance with approved procedures.</span><br><span>Support energization, start-up, shutdown, and equipment trial runs.</span><br><span>Read and follow single-line diagrams, schematics, wiring diagrams, and test procedures.</span><br><span>Record test results and complete commissioning checklists.</span><br><span>Follow PTW, LOTO, PPE, and electrical safety requirements.</span><br></span><br><span>Requirements<span>Diploma, ITI, or technical qualification in Electrical Engineering.</span><br><span>Minimum 5 years of relevant electrical experience.</span><br><span>Proven hands-on experience in electrical commissioning activities is mandatory.</span><br><span>Candidates with only construction or installation experience will not be considered.</span><br><span>Strong knowledge of electrical testing, troubleshooting, and isolation procedures.</span><br><span>Ability to use multimeters, insulation resistance testers, clamp meters, and other testing equipment.</span><br><span>Ability to read electrical drawings and wiring diagrams.</span><br><span>Fluent in spoken and written English.</span><br><span>Experience in Oil &amp; Gas and desalination projects will be highly preferred.</span><br></span><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>