Jobs In Al Mankhool

The HVAC Technician, under general direction, performs work of average to considerable difficulty in the journey-level performance of facilities maintenance to include the primary field of Heating, Ventilation, Air Conditioning and Refrigeration (HVAC-R) and performs other tasks as assigned. Inspects, installs, troubleshoots, maintains, repairs and operations refrigeration, all types of air conditioning, evaporative cooking and ventilation equipment plants and systems, including portable units and ice makers. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br>Principal Accountabilities<br><br>Performs scheduled/unscheduled maintenance in accordance with Job Plans. Installs, modifies, repairs, constructs, fabricates, troubleshoots and maintains refrigeration and air conditioning (unit sizes up to 35 ton), ventilation and related control systems and equipment according to applicable Technical Publications and directives. Installs, adjusts and calibrates thermostats, electronic, pressure and pneumatic controls on HVAC-R systems to maintain a comfortable temperature for employees and proper equipment operation. May be required to respond to 24-hour emergency calls for assigned work area to perform emergency equipment repairs during off duty hours using a vehicle, telephone, hand, power and specialty tools and necessary parts/materials. Identifies and corrects equipment problems by maintaining HVAC-R equipment in a safe condition, prevent degradation of property and systems and prevent failures that would cause reduction in service. Diagnoses and isolates unusual malfunction to individual system components. Uses special pressure, temperature and analysis test equipment to determine efficiency and effectiveness of refrigeration cooling. Adjusts, calibrates and aligns components for optimum operating efficiency within design limitations. Inspects completed or in progress work for compliance with standard operating procedures, safety standards and technical publications. Provides technical expertise to facilities personnel to assist them in understanding specific job requirements. Conforms to Amentum safety, hazardous material and quality standards. Follows safety standards in working with multiple services, tools and equipment. Operates Mechanical Handling Equipment when trained to do so. Trains co-workers to perform preventive maintenance and repair work on mechanical portion of equipment. Performs other duties as assigned. Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br>Minimum Requirements<br><br>Must have organizational skills and be able to understand, speak, read and write English at a beginner level. Must be able to read and understand technical data, plans/blueprints and publications pertaining to USAF refrigeration air-conditioning systems. Must possess a valid home country driver's license and ability to obtain host nation driver's license. May be required to operate material handling equipment. High School diploma or equivalent required. Five years practical experience of refrigeration and air-conditioning systems required. Education or technical training in a field related to facilities maintenance through a recognized trade union, technical school or equivalent, accredited college or university may substitute for up to two years of the required experience. May be exposed to extreme noise from operating equipment. Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. Must be able to travel domestically and internationally.

Primary Functions To co-ordinate and supervise the activities of the foremen and his crew on the project. Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities<br><br>Tasks and Responsibilities To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately. To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises. Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable). To be conversant with the specific standards applicable to the project / area of work. To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work. Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely. Interface with the production engineer to ensure material is available for the planned work. To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely. To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility. Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates. Forecast resources required for the planned work ahead (Manpower, Equipment's etc.) To be able to conduct meeting with those reporting to him in an organized manner. To set targets of production for each of those directly reporting to him, targets for Foremen. To be able to communicate supports services in the yard, QC & NDT. Provide written instruction where necessary to those directly reporting to him. Drive the team to achieve progress, productivity, safety and quality. Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers. Take actions where standards and targets are not met. Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement Address any issue of poor quality/ productivity and act where appropriate. Report area of poor performance and provide recommendation for improvement. Provide accurate feedback to Superintendent. Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner. Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process. Review TRA with his foremen when require and ensure it is discussed with his crew. Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety. Lead by example and make sure company policies and procedures are followed. Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection. Interface with F&M department to ensure timely calibration of welding machines. Interface with Welding engineers to qualify WPS, welders for specific project. Proper planning of qualifications in welding school to meet project requirements Other Expectations:Promote implementation of QHSES initiatives and drive achieving objectives<br><br>Education Qualification and Experience<br>Education: High School Diploma Level<br>Experience: 10+ years of experience in Offshore Construction industry Has an exposure to a multidiscipline work environment. Must understand governing code requirements and be able to interpret and apply project specification

The HVAC Technician, under general direction, performs work of average to considerable difficulty in the journey-level performance of facilities maintenance to include the primary field of Heating, Ventilation, Air Conditioning and Refrigeration (HVAC-R) and performs other tasks as assigned. Inspects, installs, troubleshoots, maintains, repairs and operations refrigeration, all types of air conditioning, evaporative cooking and ventilation equipment plants and systems, including portable units and ice makers. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br>Principal Accountabilities<br><br>Performs scheduled/unscheduled maintenance in accordance with Job Plans. Installs, modifies, repairs, constructs, fabricates, troubleshoots and maintains refrigeration and air conditioning (unit sizes up to 35 ton), ventilation and related control systems and equipment according to applicable Technical Publications and directives. Installs, adjusts and calibrates thermostats, electronic, pressure and pneumatic controls on HVAC-R systems to maintain a comfortable temperature for employees and proper equipment operation. May be required to respond to 24-hour emergency calls for assigned work area to perform emergency equipment repairs during off duty hours using a vehicle, telephone, hand, power and specialty tools and necessary parts/materials. Identifies and corrects equipment problems by maintaining HVAC-R equipment in a safe condition, prevent degradation of property and systems and prevent failures that would cause reduction in service. Diagnoses and isolates unusual malfunction to individual system components. Uses special pressure, temperature and analysis test equipment to determine efficiency and effectiveness of refrigeration cooling. Adjusts, calibrates and aligns components for optimum operating efficiency within design limitations. Inspects completed or in progress work for compliance with standard operating procedures, safety standards and technical publications. Provides technical expertise to facilities personnel to assist them in understanding specific job requirements. Conforms to Amentum safety, hazardous material and quality standards. Follows safety standards in working with multiple services, tools and equipment. Operates Mechanical Handling Equipment when trained to do so. Trains co-workers to perform preventive maintenance and repair work on mechanical portion of equipment. Performs other duties as assigned. Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods. <br><br>Minimum Requirements<br><br>Must have organizational skills and be able to understand, speak, read and write English at a beginner level. Must be able to read and understand technical data, plans/blueprints and publications pertaining to USAF refrigeration air-conditioning systems. Must possess a valid home country driver's license and ability to obtain host nation driver's license. May be required to operate material handling equipment. High School diploma or equivalent required. Five years practical experience of refrigeration and air-conditioning systems required. Education or technical training in a field related to facilities maintenance through a recognized trade union, technical school or equivalent, accredited college or university may substitute for up to two years of the required experience. May be exposed to extreme noise from operating equipment. Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. Must be able to travel domestically and internationally.

<p>Job: Coordinator, Research Training Work Location: Qatar Organization: Research Administration Work Days: Sunday-Thursday Sponsorship Eligibility: No Classification: Full Time Posting End Date: 07/21/2026 Position Summary: The position coordinates research training activities for WMC-Q students and interns, maintaining required documentation, data and reporting. Job Responsibilities: - Provides administrative support for training programs, including SOP updates, documentation and file access. - Tracks applications and deadlines and flags anomalies to ensure compliance with division requirements. - Coordinates schedules, rooms, instructors, information sessions, applications and lab placements for student research programs (PM and Med) and the National Training Programs. - Supports recruitment, hiring, orientation and placement process as required for different training groups. - Liaises with the communications team on press releases, social media, and community engagement for research training. - Gathers and organizes data for training metrics, preparing simple charts, reports, and workflows as directed. - Coordinate external program delivery across partner institutions (e.g., HMC, Sidra, QU, PHC, EC). - Distributes program documents and facilitates research training goals by meeting stakeholders and spreading awareness within the local community. - Provides support to interns, students, volunteers, and trainees and assists in the evaluation process as required. - Assists with developing, enhancing or testing systems used for research training. - Performs other duties as assigned.</p><p>Education and Experience: - Bachelor's Degree in any discipline - 3 – 5 years of related experience - Prior experience in healthcare or research setup is an added advantage. Knowledge, Skills and Abilities: - Customer-focused with strong verbal and written communication skills. - Excellent organizational skills with the ability to prioritize tasks in a challenging environment. - Good problem-solving skills and attention to detail. - Ability to work both independently and as part of a team. - Proficient in MS Office Suite Word, Excel, PowerPoint, Outlook, etc.</p>

<p>Job: Coordinator, Research Training Work Location: Qatar Organization: Research Administration Work Days: Sunday-Thursday Sponsorship Eligibility: No Classification: Full Time Posting End Date: 07/21/2026 Position Summary: The position coordinates research training activities for WMC-Q students and interns, maintaining required documentation, data and reporting. Job Responsibilities: - Provides administrative support for training programs, including SOP updates, documentation and file access. - Tracks applications and deadlines and flags anomalies to ensure compliance with division requirements. - Coordinates schedules, rooms, instructors, information sessions, applications and lab placements for student research programs (PM and Med) and the National Training Programs. - Supports recruitment, hiring, orientation and placement process as required for different training groups. - Liaises with the communications team on press releases, social media, and community engagement for research training. - Gathers and organizes data for training metrics, preparing simple charts, reports, and workflows as directed. - Coordinate external program delivery across partner institutions (e.g., HMC, Sidra, QU, PHC, EC). - Distributes program documents and facilitates research training goals by meeting stakeholders and spreading awareness within the local community. - Provides support to interns, students, volunteers, and trainees and assists in the evaluation process as required. - Assists with developing, enhancing or testing systems used for research training. - Performs other duties as assigned.</p><p>Education and Experience: - Bachelor's Degree in any discipline - 3 – 5 years of related experience - Prior experience in healthcare or research setup is an added advantage. Knowledge, Skills and Abilities: - Customer-focused with strong verbal and written communication skills. - Excellent organizational skills with the ability to prioritize tasks in a challenging environment. - Good problem-solving skills and attention to detail. - Ability to work both independently and as part of a team. - Proficient in MS Office Suite Word, Excel, PowerPoint, Outlook, etc.</p>

The Maintenance Engineer is responsible for proper functioning of all heating, ventilation, and air conditioning (HVAC) equipment in the yard and all structures, services in the main people buildings. The Maintenance Engineer leverages deep understanding of maintenance strategies in-order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of Maintenance in monitoring and implementing the strategies for managing the shipyards assets throughout their lifecycle. All works is executed to a high quality & auditable standard that is consistent with the companies integrated management systems and policies. As an officer, a high level of trade skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.<br>Key Accountabilities:1) Develop a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking down the strategy into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy.2) Operate and maintain HVAC equipment, including but not limited to dehumidifiers, chillers, AHUs, pumps, fan coil units, Variable Refrigerant Volume (VRV) units, Air Cooled Condensing Unit (ACCU) units, window air-conditioning units, split air-conditioning units and ventilation systems and all its components.3) Operate and maintain Low Voltage (LV) Power & Lighting system, Elevator, sliding door, Dock leveler, Building Maintenance Unit (BMU), Electrical Low Voltage (ELV) systems consisting of Access Control System, Barrier gate, Intercom and all its components.4) Operate and maintain other building systems and Plumbing equipment’s consist of potable water booster pumps, circulation pumps, water heaters and all its components.5) Prepare and manage all spare parts required for the maintenance of the Equipment and related assets.6) Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.7) Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.8) Prepare Scope Of Work (SOW), Scope Of Service (SOS) and Tender documentation for sub-contractors works.9) Supervise sub-contractors and ensure compliance with scope of work.10) Lead and supervise maintenance technicians.11) Prepare fit for purpose Work Permits and Risk Assessment for the identification, control and/or mitigation of workplace risk.12) Maintain maintenance records.13) Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.14) Communicate upwards – training needs, process improvement suggestions and follow up on implementation. Qualifications:• Engineering Degree in Mechanical or HVAC. Experience:• 5 years of relevant experience as a Mechanical Maintenance Engineer, HVAC Maintenance Engineer or equivalent. Job Specific Competencies:Technical Competencies• O&M Skill of HVAC, LV, Plumbing, and ELV Systems.• Read and comprehend HVAC drawings and schematics, including control diagrams.• Understand HVAC systems and components.• Capable of reviewing HVAC calculations and other technical data from contractors.• Capable of examining existing HVAC system to determine condition of systems and identify areas for improvement.• Knowledge of all Building structures and services.• Perform shipyard maintenance operations.• Carry out facility management.• Perform Mechanical and Electrical design and modification job.

The Maintenance Engineer is responsible for proper functioning of all heating, ventilation, and air conditioning (HVAC) equipment in the yard and all structures, services in the main people buildings. The Maintenance Engineer leverages deep understanding of maintenance strategies in-order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of Maintenance in monitoring and implementing the strategies for managing the shipyards assets throughout their lifecycle. All works is executed to a high quality & auditable standard that is consistent with the companies integrated management systems and policies. As an officer, a high level of trade skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.<br>Key Accountabilities:1) Develop a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking down the strategy into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy.2) Operate and maintain HVAC equipment, including but not limited to dehumidifiers, chillers, AHUs, pumps, fan coil units, Variable Refrigerant Volume (VRV) units, Air Cooled Condensing Unit (ACCU) units, window air-conditioning units, split air-conditioning units and ventilation systems and all its components.3) Operate and maintain Low Voltage (LV) Power & Lighting system, Elevator, sliding door, Dock leveler, Building Maintenance Unit (BMU), Electrical Low Voltage (ELV) systems consisting of Access Control System, Barrier gate, Intercom and all its components.4) Operate and maintain other building systems and Plumbing equipment’s consist of potable water booster pumps, circulation pumps, water heaters and all its components.5) Prepare and manage all spare parts required for the maintenance of the Equipment and related assets.6) Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.7) Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.8) Prepare Scope Of Work (SOW), Scope Of Service (SOS) and Tender documentation for sub-contractors works.9) Supervise sub-contractors and ensure compliance with scope of work.10) Lead and supervise maintenance technicians.11) Prepare fit for purpose Work Permits and Risk Assessment for the identification, control and/or mitigation of workplace risk.12) Maintain maintenance records.13) Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.14) Communicate upwards – training needs, process improvement suggestions and follow up on implementation. Qualifications:• Engineering Degree in Mechanical or HVAC. Experience:• 5 years of relevant experience as a Mechanical Maintenance Engineer, HVAC Maintenance Engineer or equivalent. Job Specific Competencies:Technical Competencies• O&M Skill of HVAC, LV, Plumbing, and ELV Systems.• Read and comprehend HVAC drawings and schematics, including control diagrams.• Understand HVAC systems and components.• Capable of reviewing HVAC calculations and other technical data from contractors.• Capable of examining existing HVAC system to determine condition of systems and identify areas for improvement.• Knowledge of all Building structures and services.• Perform shipyard maintenance operations.• Carry out facility management.• Perform Mechanical and Electrical design and modification job.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **</p><br><p>Job Summary and Purpose</p><p>Supervise, Oversee and manage dimensional control survey activities to ensure all structural assemblies and piping spools meet specified dimensions and tolerances. Provide assurance that dimensional surveys are carried out on fabricated structures and piping spools, including all fabrication marine interfaces.</p><p>Accountabilities</p><ul><li><p>Develop, plan, and implement dimensional survey programs in accordance with project specifications and schedules, ensuring optimal use of resources, tools, and equipment.</p></li><li><p>Review and interpret project drawings, models, and specifications to prepare a comprehensive Dimensional Control / Measurement Plan, identifying intervention points in coordination with the Project Quality Lead.</p></li><li><p>Plan and execute surveying and dimensional verification activities for fabrication, assembly, and installation phases, ensuring all mating interfaces (fabrication, marine, structural, piping, and module connections) are accurately measured and that “best-fit” alignment scenarios are evaluated and established.</p></li><li><p>Ensure strict adherence to the Dimensional Control Inspection &amp; Test Plan (DC ITP) at all stages of project execution, and update the plan to incorporate design revisions or scope changes.</p></li><li><p>Review, validate, and formally approve dimensional control reports, submitting them to the Project Lead or Client Representative as required.</p></li><li><p>Maintain detailed and traceable records of all dimensional inspections, survey data, and control activities in accordance with project and company documentation standards.</p></li><li><p>Manage and track all Dimensional Control (DC) survey requests, ensuring timely completion, accurate documentation, and clear reporting of results.</p></li><li><p>Verify that all surveying instruments and equipment (e.g., Leica, SOKKIA, Topcon) are calibrated, certified, and within validity before use.</p></li><li><p>Ensure all Dimensional Control personnel are working with the latest approved drawings and project specifications (AFC status).</p></li><li><p>Liaise and coordinate with Client Discipline Representatives, production team, Quality Inspectors, and Fabrication Leads to resolve dimensional discrepancies and ensure alignment with project requirements.</p></li><li><p>Supervise and mentor Sr./dimensional controllers, providing guidance, training, and technical oversight to ensure high-quality deliverables.</p></li><li><p>Promote teamwork and effective communication between fabrication, installation, and survey teams to achieve dimensional accuracy and schedule compliance.</p></li><li><p>Employee should prioritize the wellbeing of themselves and their colleagues while maintaining a safe and healthy work Environment. Adhere to all health &amp; safety protocols, participate in wellbeing &amp; wellness programs, and propty report any concerns regarding the wellbeing of oneself &amp; others in order to foster a culture of best practice.</p></li><li><p>Support Fit-Up, Alignment, and Weld Visual Inspections as required to verify structural and piping accuracy prior to welding or assembly.</p></li><li><p>Perform other tasks or assignments as directed by the Head of QSA / Project Engineer/Lead / Quality Manager in line with project objectives.</p></li><li><p>Perform other duties or assignments as directed (Fit up inspections, weld visual inspections etc).</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications:</p><ul><li><p>Bachelor’s Degree (4 years) or Diploma (3 years) in a relevant technical discipline, preferably in accredited Civil /Mechanical Engineering or related field.</p></li><li><p>Proficient in AutoCAD and other drafting/design software.</p><br></li></ul><p>Experience:</p><ul><li><p>Minimum 6 years of total experience in surveying, dimensional control, and alignment activities within EPIC / EPC industrial projects.</p></li><li><p>At least 3 years in a senior or supervisory role overseeing dimensional control teams, coordinating survey operations, and ensuring compliance with project quality standards.</p></li><li><p>Extensive hands-on experience with precision surveying and measurement equipment such as SOKKIA, Leica, Topcon, or equivalent instruments.</p></li><li><p>Demonstrated expertise in the surveying and dimensional verification of structural assemblies, piping spools, and modular components during fabrication and installation stages.</p></li><li><p>Proficient in reading and interpreting structural drawings, piping isometrics (ISO), GA drawings, and fabrication layouts.</p></li><li><p>Strong understanding of fabrication, assembly, and installation tolerances in accordance with international and project-specific standard</p></li></ul><p></p></section>

Responsibility: • To assist Dock Master to handle day to day docking/undocking operations and maintain logbook• Assist the Dock Master to coordinate quay side vessel movements/shifting operations• Assist Dock Master to monitor and coordinate the docks/ship lift blocks arrangement.• Rigorously supports to follow the preventive and breakdown maintenance plan and ensure implementation by Milaha Ship Management. Ensure that all equipment onboard is well maintained and fully operational.• Assist Dock Master to ensure floating dock is maintained and class surveys are carried out as required.• Assist Dock Master to conduct safety briefing/toolbox talk prior to dock operations and maintain relevant documentations• Support Dock Master to ensure mooring/ dock maintenance teams are adequately trained to meet the highest standards of quality, safety and efficiency during operations• Support Dock Master to maintain documentation/ drawings of ship lift and floating docks, ensure compliance in accordance with Milaha Ship Management guidance• Assist Dock Master to put forward requisitions of spare parts and materials to repair and maintain floating dock and ship lift• Assist Dock Master during installation of machineries of both ship lift and floating docks.<br>Qualification:• Diploma in Mechanical Engineering or Technical Training School Diploma or Naval Architecture• Minimum 4-5 years' experience in assisting of operating floating dock and ship lift

Primary Purpose Of The Job<br><br>To ensure the as built data submitted meets Refinery standards, Specification, and requirement by reviewing Master Deliverable Register (MDR), index structure, format and presentation of project dossiers. Ensure relevant forms as per Refinery Integrated management system Procedures are submitted.<br><br>To carry out the Life cycle management of technical documentation (Drawings and Technical Documents) pertaining to Refinery as per Refinery Engineering Document Control Procedure and update the project dossiers with revised data, archiving of the obsolete documentation and update the Document Master Index.<br><br>Liaison with Qatar Energy Refinery employees, Qatar Energy Representatives, Consultants and Contractors who utilizes technical library that covers the complete drawings and technical documents pertaining Refining operations and Projects.<br><br>To search and retrieve data in Civil, Mechanical, Electrical, Process and Instruments disciplines for tag proposals of the Equipment, system, components, and its subcomponents. Provides copy services for both hard copy and soft copy of drawings and technical documents to all departments in Refining Operations.<br><br>Required Experience And Skills<br><br>Thorough understanding and knowledge of manual and electronic document control management systems and technical data. Good Knowledge of English, both written and Spoken and advanced knowledge of Microsoft Office products with emphasis on MS Access, Excel, and Word.<br><br>Experience<br><br>Minimum 7-year experience in a document control environment with minimum 2 years in Oil & Gas Industry / Refinery.<br><br>Educational Qualifications<br><br>Technical Diploma or equivalent.

Primary Purpose Of The Job<br><br>To ensure the as built data submitted meets Refinery standards, Specification, and requirement by reviewing Master Deliverable Register (MDR), index structure, format and presentation of project dossiers. Ensure relevant forms as per Refinery Integrated management system Procedures are submitted.<br><br>To carry out the Life cycle management of technical documentation (Drawings and Technical Documents) pertaining to Refinery as per Refinery Engineering Document Control Procedure and update the project dossiers with revised data, archiving of the obsolete documentation and update the Document Master Index.<br><br>Liaison with Qatar Energy Refinery employees, Qatar Energy Representatives, Consultants and Contractors who utilizes technical library that covers the complete drawings and technical documents pertaining Refining operations and Projects.<br><br>To search and retrieve data in Civil, Mechanical, Electrical, Process and Instruments disciplines for tag proposals of the Equipment, system, components, and its subcomponents. Provides copy services for both hard copy and soft copy of drawings and technical documents to all departments in Refining Operations.<br><br>Required Experience And Skills<br><br>Thorough understanding and knowledge of manual and electronic document control management systems and technical data. Good Knowledge of English, both written and Spoken and advanced knowledge of Microsoft Office products with emphasis on MS Access, Excel, and Word.<br><br>Experience<br><br>Minimum 7-year experience in a document control environment with minimum 2 years in Oil & Gas Industry / Refinery.<br><br>Educational Qualifications<br><br>Technical Diploma or equivalent.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

Primary Purpose Of The Job<br><br>Perform duties as a Watch Commander to direct and motivate teams responding to fires, rescues and other emergency situations to prevent escalation as quickly as possible. Design and formulate drills and exercises within the community to develop individual and team competencies to the benefit of the industrial cities community and within a safe working environment.<br><br>Direct the on-station watch in the performance of routine and non-routine duties, including emergency operations, exercises, drills, emergency vehicle operation and preparedness activities.<br><br>Required Experience And Skills<br><br>Successfully completed Basic Fire Fighter 1 & 2 (NFPA 1001) & Breathing Apparatus Wearer course. Successfully completed NFPA 1041 Fire Instructor 1 & NFPA Fire Officer 1 & 2Qualified First Aider to first responder (CPR with AED) level. Minimum 7 years as a Fire-Fighter or equivalent in a commercial or industrial Fire-Fighter environment, civil, or military fire service or three years as leading fire-fighter in QP. Possess a valid driving License - preferably Heavy Vehicle. Technical skills -- must be able to use broad range of modern equipment for firefighting and rescue. The ability to rapidly information on arrival at an incident in conditions may be dangerous and confusing and accordingly dictate instructions to the on-scene crews. Understanding for the victims of fire and accident and able to cope with distressing circumstances. Intermediate Language ( (QP L4) both spoken and written.<br><br>Educational Qualifications<br><br>Completed secondary school education.

** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **<br>Job Summary and Purpose<br>Supervise, Oversee and manage dimensional control survey activities to ensure all structural assemblies and piping spools meet specified dimensions and tolerances. Provide assurance that dimensional surveys are carried out on fabricated structures and piping spools, including all fabrication marine interfaces.<br><br>Accountabilities:<br>Develop, plan, and implement dimensional survey programs in accordance with project specifications and schedules, ensuring optimal use of resources, tools, and equipment. Review and interpret project drawings, models, and specifications to prepare a comprehensive Dimensional Control / Measurement Plan, identifying intervention points in coordination with the Project Quality Lead. Plan and execute surveying and dimensional verification activities for fabrication, assembly, and installation phases, ensuring all mating interfaces (fabrication, marine, structural, piping, and module connections) are accurately measured and that “best-fit” alignment scenarios are evaluated and established. Ensure strict adherence to the Dimensional Control Inspection & Test Plan (DC ITP) at all stages of project execution and update the plan to incorporate design revisions or scope changes. Review, validate, and formally approve dimensional control reports, submitting them to the Project Lead or Client Representative as required. Maintain detailed and traceable records of all dimensional inspections, survey data, and control activities in accordance with project and company documentation standards. Manage and track all Dimensional Control (DC) survey requests, ensuring timely completion, accurate documentation, and clear reporting of results. Verify that all surveying instruments and equipment (e.g., Leica, SOKKIA, Topcon) are calibrated, certified, and within validity before use. Ensure all Dimensional Control personnel are working with the latest approved drawings and project specifications (AFC status). Liaise and coordinate with Client Discipline Representatives, production team, Quality Inspectors, and Fabrication Leads to resolve dimensional discrepancies and ensure alignment with project requirements. Supervise and mentor Sr./dimensional controllers, providing guidance, training, and technical oversight to ensure high-quality deliverables. Promote teamwork and effective communication between fabrication, installation, and survey teams to achieve dimensional accuracy and schedule compliance. Employee should prioritize the wellbeing of themselves and their colleagues while maintaining a safe and healthy work Environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice. Support Fit-Up, Alignment, and Weld Visual Inspections as required to verify structural and piping accuracy prior to welding or assembly. Perform other tasks or assignments as directed by the Head of QSA / Project Engineer/Lead / Quality Manager in line with project objectives. Perform other duties or assignments as directed (Fit up inspections, weld visual inspections etc).<br><br>Qualifications<br>Bachelor’s Degree (4 years) or Diploma (3 years) in a relevant technical discipline, preferably in accredited Civil /Mechanical Engineering or related field. Proficient in Auto CAD and other drafting/design software.<br><br>Experience:<br>Minimum 6 years of total experience in surveying, dimensional control, and alignment activities within EPIC / EPC industrial projects. At least 3 years in a senior or supervisory role overseeing dimensional control teams, coordinating survey operations, and ensuring compliance with project quality standards. Extensive hands-on experience with precision surveying and measurement equipment such as SOKKIA, Leica, Topcon, or equivalent instruments. Demonstrated expertise in the surveying and dimensional verification of structural assemblies, piping spools, and modular components during fabrication and installation stages. Proficient in reading and interpreting structural drawings, piping isometrics (ISO), GA drawings, and fabrication layouts. Strong understanding of fabrication, assembly, and installation tolerances in accordance with international and project-specific standards. Strong understanding of dimensional control procedures, tolerances, and industry standards.

** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **<br>Job Summary and Purpose<br>Supervise, Oversee and manage dimensional control survey activities to ensure all structural assemblies and piping spools meet specified dimensions and tolerances. Provide assurance that dimensional surveys are carried out on fabricated structures and piping spools, including all fabrication marine interfaces.<br><br>Accountabilities:<br>Develop, plan, and implement dimensional survey programs in accordance with project specifications and schedules, ensuring optimal use of resources, tools, and equipment. Review and interpret project drawings, models, and specifications to prepare a comprehensive Dimensional Control / Measurement Plan, identifying intervention points in coordination with the Project Quality Lead. Plan and execute surveying and dimensional verification activities for fabrication, assembly, and installation phases, ensuring all mating interfaces (fabrication, marine, structural, piping, and module connections) are accurately measured and that “best-fit” alignment scenarios are evaluated and established. Ensure strict adherence to the Dimensional Control Inspection & Test Plan (DC ITP) at all stages of project execution and update the plan to incorporate design revisions or scope changes. Review, validate, and formally approve dimensional control reports, submitting them to the Project Lead or Client Representative as required. Maintain detailed and traceable records of all dimensional inspections, survey data, and control activities in accordance with project and company documentation standards. Manage and track all Dimensional Control (DC) survey requests, ensuring timely completion, accurate documentation, and clear reporting of results. Verify that all surveying instruments and equipment (e.g., Leica, SOKKIA, Topcon) are calibrated, certified, and within validity before use. Ensure all Dimensional Control personnel are working with the latest approved drawings and project specifications (AFC status). Liaise and coordinate with Client Discipline Representatives, production team, Quality Inspectors, and Fabrication Leads to resolve dimensional discrepancies and ensure alignment with project requirements. Supervise and mentor Sr./dimensional controllers, providing guidance, training, and technical oversight to ensure high-quality deliverables. Promote teamwork and effective communication between fabrication, installation, and survey teams to achieve dimensional accuracy and schedule compliance. Employee should prioritize the wellbeing of themselves and their colleagues while maintaining a safe and healthy work Environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice. Support Fit-Up, Alignment, and Weld Visual Inspections as required to verify structural and piping accuracy prior to welding or assembly. Perform other tasks or assignments as directed by the Head of QSA / Project Engineer/Lead / Quality Manager in line with project objectives. Perform other duties or assignments as directed (Fit up inspections, weld visual inspections etc).<br><br>Qualifications<br>Bachelor’s Degree (4 years) or Diploma (3 years) in a relevant technical discipline, preferably in accredited Civil /Mechanical Engineering or related field. Proficient in Auto CAD and other drafting/design software.<br><br>Experience:<br>Minimum 6 years of total experience in surveying, dimensional control, and alignment activities within EPIC / EPC industrial projects. At least 3 years in a senior or supervisory role overseeing dimensional control teams, coordinating survey operations, and ensuring compliance with project quality standards. Extensive hands-on experience with precision surveying and measurement equipment such as SOKKIA, Leica, Topcon, or equivalent instruments. Demonstrated expertise in the surveying and dimensional verification of structural assemblies, piping spools, and modular components during fabrication and installation stages. Proficient in reading and interpreting structural drawings, piping isometrics (ISO), GA drawings, and fabrication layouts. Strong understanding of fabrication, assembly, and installation tolerances in accordance with international and project-specific standards. Strong understanding of dimensional control procedures, tolerances, and industry standards.

Essential Responsibilities:<br><br>The designee shall provide logistics support to various sites. The individual shall be familiar with manual and automated supply accounting systems, AFMAN 23-122 and AFH 23-123 policies and procedures, techniques of requirement computation, storage practices, and inventory management. The designee shall have a working knowledge of the functional areas of supply, transportation, maintenance and procurement, and traffic management (TMO) and/or air terminal operations, freight, acceptance, preparation, processing, inspection, documentation, and handling procedures. The designee shall have knowledge in certification and/or inspection of hazardous materials for air transportation IAW AFMAN 24-204 (I) and cargo movement as prescribed in AFI 24- 203. Providing management of Government Furnished Property in the possession of a contractor is critical to the position, as is the use of Procurement Integrated Enterprise Environment (PIEE) in the execution of that management.<br><br>Minimum Position Knowledge, Skills, and Abilities Required:<br><br>High School diploma or GED. Relevant Associate’s degree preferred. Formal training on material management activities such as: military technical training school, vocational college, and/or a four (4) year apprentice program with experience in material management and logistics support. Minimum six (6) years of practical experience with duty performed in various Asset Management Systems, USAF Standard Base Supply (SBSS) or Enterprise Solutions System (ES-S) functions to include a min of four (4) years’ experience as a Supply Liaison/technician. Equivalency for the following classes shall be provided as follows: (1) Fundamentals of Systems Acquisition Management, (2) Acquisition Logistics Fundamentals, (3) Systems Sustainment Management; (4) Intermediate Systems Acquisition, (5) Intermediate Acquisition Logistics, and (6) Performance Based Logistics. Ability to obtain/maintain a US CENTCOM Medical Exam. Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance. Must have a valid driver’s license. Must have proficiency with Microsoft Office products, particularly MS Excel Experience with Maintenance Repair and Operations (MRO) platform or equivalent is a plus<br><br>Compensation Details:<br><br>$100,000.00<br><br>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.<br><br>Benefits Overview:<br><br>Our health and welfare benefits are designed to support you and your priorities. Offerings include:<br><br>Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance<br><br>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.<br><br>Original Posting:<br><br>05/08/2026 - Until Filled<br><br>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.<br><br>Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.