Activity Supervisor Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Liaise with the HSE Supervisor on safety related matters. Act as a safety leader.</li> <li>Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement.</li> <li>Assist functional supervisor in reviewing and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs.</li> <li>Supervise all EPIC contractor's Static &amp; Rotating equipment inspection &amp; installation activities are based on approved engineering documentation and project schedule during the execution of construction activities.</li> <li>Attend Requests for Inspections (RFIs) as per approved ITPs including Material Receiving Inspections in coordination with Lead Construction Supervisor and sign off relevant inspection and test reports / RFIs.</li> <li>Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification.</li> <li>Lead the construction contractor(s) on all mechanical aspects of the Static and Rotating Equipment installation works.</li> <li>Supervise with EPIC contractor during execution of the Static (including internals) and Rotating Equipment installation, FAT, alignment Inspection, Punch Clearing, pressure testing, pre-commissioning and Re-instatement at site.</li> <li>Manage and lead final mechanical completion inspections and punch closing.</li> <li>Supervisor the Pre-Com activities to ensure safety and the quality of the completed work.</li> <li>Lead the inspection activity with Vendor/Supplier at Site whenever required.</li> <li>Participate in PSSR and provide support to Operations pre &amp; start up activity where instructed.</li> <li>Co-ordinate mobilization of contractors on site.</li> <li>Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.</li> <li>Good knowledge in reading and understanding P&amp;ID, GA, Associate structural drawings, Equipment Layout &amp; mechanical drawings and Manufacturer manual/Recommendations.</li> <li>Maintain a daily record of progress (daily diary) noting special comments. Reports to Snr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.</li> <li>Participate in development of as-built drawings/documentation.</li> <li>Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing safety standards on the work site.</li> <li>Liaise and report with the QA/QC Inspector on quality related matters.</li> </ul><br><ul> <li>Candidate Must possess a Degree or Diploma in Mechanical Engineering from an internationally recognized University.</li> <li>Preferably having formal training in QA/QC functional aspects.</li> <li>Candidate should have a minimum of 10 years overall experience in static and rotating equipment installation, including inspection coordination experience in the construction of midstream / downstream Oil &amp; Gas facilities.</li> <li>Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred.</li> <li>Current experience in State of Qatar industrial cities and/or other GCC countries is required.</li> <li>Extensive knowledge of international and industry specific codes &amp; standards, including ASME, ANSI, ISO, API, NFPA, SHELL DEP's, etc. Mechanical inspector certificates (API 510 &amp; API 653) would be an advantage.</li> <li>Extensive experience in coating systems and procedures, incl painting, galvanizing, wrapping, insulation, Refractory Lining etc. BGAS / API certification would be an advantage.</li> <li>Extensive experience in Static and Rotating Equipment Installation, FAT, Alignment, Inspection, punch list clearing, pressure testing, pre-commissioning and mechanical completion inspections, etc.</li> <li>Tie-in to live facilities, including testing and integration to existing systems,</li> <li>Stage Inspection and Testing of Construction activities as per approved ITPs</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Create recreational activity agendas and advertisements using publishing software. Conduct inventory of supplies, materials, and equipment and inform manager of low supply items. Encourage, recruit, register, and schedule guests to participate in recreation activities. Promote a fun and relaxing atmosphere for guests. Provide information to guests about available recreation facilities and activities. Promote the rules and regulations of the recreation facility intended for the safety and welfare of guests and members. Observe activity in the recreational facility and respond appropriately in accordance with local operating procedure in the event of an emergency. Be aware of possible situations where guests are not able to safely participate in an activity and inform supervisor/manager. Provide assistance to injured guests until the arrival of emergency medical services. Clean and maintain recreational equipment and supplies.<br>Assist management in training, motivating, and coaching employees; serve as a role model. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow company policies and procedures; ensure uniform and personal appearance is clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs; assist individuals with disabilities. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others. Process orders or transactions from customers and collect payment as necessary. Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and objects weighing in excess of 50 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: At least 1 year of related work experience.<br>Supervisory Experience: At least 1 year of supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: CPR Certification<br>First Aid Certification<br>Recreation and Fitness Equipment<br>Any certification or training required by local and state agencies.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Combining timeless glamour with a vanguard spirit, St. Regis Hotels &amp; Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44220&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Garage Supervisor M/F </p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>5 years</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy&nbsp;Doha&nbsp;&nbsp;</p><br><br><p>&nbsp; &nbsp;<strong>&nbsp;Garage Supervisor</strong></p><br><br><br><p>Garage Supervisor should be a very capable person, well versed in all aspects of Garage SERVICES, with having adequate experience (minimum 10 years). In efficiently planning and executing the preventive maintenance program of Mobile / Static diesel driven equipment and repair to hydraulic systems for<br>various heavy lifting vehicles and portable equipment.</p><br><br><br><p>Duties and Responsibilities</p><br><br><ul><li>Co-ordinate/ Organize and monitor routine and preventive maintenance of vehicles/equipment at plant for Maintenance of Heavy Equipment like Diesel Generator, Fire Water pumps ,Air compressors,&nbsp;Mobile cranes, Trucks, man lifts, firefighting equipment, other lifting equipment’s etc…</li><li>Provide schedule activities and assign technicians to perform Periodical Maintenance programs as per&nbsp;PM WORK ORDER / and inspections or/ and attend breakdown jobs as well as emergency jobs.</li><li>Supervision of spare parts replacements by using proper tools and manufactures specifications.</li><li>Diagnose the electrical and electronic defect in the machines and rectified the defects.</li><li>Control/ understand the overhauling jobs of various types of hydraulic pumps like, gear pumps,&nbsp;variable flow piston pumps etc...</li></ul> <br> Profile <br><p>Educational Qualifications:</p><br><br><ul><li>Mechanical Engineering &amp; Automobile Engineering</li><li>Diploma in Mechanical/ Automobile Engineering&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;Relevant Work Experience:</li><li>Minimum 10 years’ experience in the field of Heavy Equipment</li><li>Maintenance activities out of this minimum 5 years in Oil &amp;Gas or petrochemical industries.</li><li>Excellent technical knowledge in hydraulics and pneumatics</li><li>Familiar with the Firefighting Equipment/vehicles operation and maintenance.</li><li>Technical background, preferably in Mechanical Engineering &amp; Automobile Engineering</li><li>Knowledge of the industry, its manufacturers, its customers, and their requirements</li></ul> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> RAS LAFFAN <br>Candidate criteria Minimum level of experience required <p>10 years or more</p><br><br> Required authorisations <br><p>NA</p><br><br> <br> Languages <p>English (C-Professional working proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities.</p><br><br> <br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Create recreational activity agendas and advertisements using publishing software. Conduct inventory of supplies, materials, and equipment and inform manager of low supply items. Encourage, recruit, register, and schedule guests to participate in recreation activities. Promote a fun and relaxing atmosphere for guests. Provide information to guests about available recreation facilities and activities. Promote the rules and regulations of the recreation facility intended for the safety and welfare of guests and members. Observe activity in the recreational facility and respond appropriately in accordance with local operating procedure in the event of an emergency. Be aware of possible situations where guests are not able to safely participate in an activity and inform supervisor/manager. Provide assistance to injured guests until the arrival of emergency medical services. Clean and maintain recreational equipment and supplies.<br>Assist management in training, motivating, and coaching employees; serve as a role model. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow company policies and procedures; ensure uniform and personal appearance is clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs; assist individuals with disabilities. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others. Process orders or transactions from customers and collect payment as necessary. Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and objects weighing in excess of 50 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: At least 1 year of related work experience.<br>Supervisory Experience: At least 1 year of supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: CPR Certification<br>First Aid Certification<br>Recreation and Fitness Equipment<br>Any certification or training required by local and state agencies.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Combining timeless glamour with a vanguard spirit, St. Regis Hotels &amp; Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p>We are seeking a professional OUTLET SUPERVISOR to oversee daily operations, guest service, and team performance at a premium yacht club outlet in Qatar. Start: As soon as possible subject to visa process.</p><p>Outlet Supervisor Role Overview</p><p>This is a leadership role within a prestigious hospitality environment, offering the chance to manage a high-profile outlet that caters to members, guests, and international visitors. The Outlet Supervisor will be responsible for ensuring smooth day-to-day operations, maintaining service excellence, and supporting the wider food and beverage team in delivering a premium guest experience. You will act as the link between the outlet staff and senior management, ensuring that standards are consistently upheld and that the outlet operates efficiently. This position requires a hands-on leader with strong organizational skills, a passion for hospitality, and the ability to inspire and motivate a team.</p><p>Outlet Supervisor Key Responsibilities</p><ul><li>Operational Oversight : Supervise daily outlet operations, ensuring smooth service flow and adherence to hospitality standards.</li><li>Guest Experience : Deliver exceptional service by engaging with guests, handling feedback professionally, and fostering repeat visits.</li><li>Team Leadership : Train, coach, and motivate staff to achieve performance goals. Lead by example on the floor and maintain a culture of accountability.</li><li>Service Standards : Ensure all staff follow SOPs, hygiene protocols, and presentation guidelines.</li><li>Financial Stewardship : Assist with cash-ups, monitor sales performance, and support cost control measures.</li><li>Inventory &amp; Stock Control : Oversee stock receiving, storage, and replenishment. Conduct regular counts to minimize variances.</li><li>Scheduling &amp; Administration : Prepare staff rosters, manage attendance, and support administrative tasks related to outlet operations.</li><li>Collaboration : Work closely with kitchen, bar, and senior management to ensure seamless coordination across departments.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience : Minimum 2 3 years of supervisory experience in a premium hospitality outlet, restaurant, or club environment.</p><p>Leadership Style : Hands-on, energetic, and approachable leader who thrives in fast-paced service.</p><p>Knowledge : Strong understanding of food and beverage service, POS systems, and hospitality operations.</p><p>Attributes : Detail-oriented, guest-focused, and calm under pressure. Professional grooming and polished communication skills are essential.</p><p>Flexibility : Willingness to work hospitality hours, including evenings, weekends, and public holidays.</p>

<p><strong>Job Summary</strong></p><p><strong>&nbsp;</strong></p><p>The High Voltage Supervisor is responsible for supervising the operation, maintenance, testing, troubleshooting, and repair of High Voltage (HV) electrical systems and associated equipment. The role ensures all work is carried out safely, efficiently, and in compliance with company procedures, client requirements, Qatar regulations, and international electrical standards.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Supervise the operation and maintenance of High Voltage electrical distribution systems.</p></li><li><p>Ensure uninterrupted electrical power supply across facilities and client assets.</p></li><li><p>Monitor electrical equipment performance and system reliability.</p></li><li><p>Coordinate switching operations for maintenance, shutdowns, and emergencies.</p></li><li><p>Supervise energization and de-energization of electrical systems.</p></li><li><p>Ensure proper load balancing and system optimization.</p></li><li><p>Coordinate emergency restoration of electrical services following outages.</p></li><li><p>Monitor electrical demand and recommend energy optimization initiatives.</p></li><li><p>Develop and implement preventive maintenance schedules for all HV electrical equipment.</p></li><li><p>Ensure maintenance activities comply with manufacturers' recommendations.</p></li><li><p>Lead troubleshooting and fault diagnosis of High Voltage electrical systems.</p></li><li><p>Investigate equipment failures and determine root causes.</p></li><li><p>Coordinate emergency repairs to restore normal operations.</p></li><li><p>Supervise replacement of faulty electrical equipment.</p></li><li><p>Verify proper operation following repairs.</p></li><li><p>Plan and supervise all High Voltage switching operations.</p></li><li><p>Prepare and review switching schedules.</p></li><li><p>Verify switching procedures before implementation.</p></li><li><p>Ensure switching activities comply with approved operational procedures.</p></li><li><p>Review electrical work permits.</p></li><li><p>Ensure all electrical works are carried out under valid permits.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma or Bachelor's Degree in Electrical Engineering.</p></li><li><p>High Voltage Authorization/Competency Certificate.</p></li><li><p>Electrical License in High voltage authorization</p></li><li><p>Additional certifications in HV Switching, Protection Systems, or Power Distribution are an advantage.</p></li><li><p>Minimum 7 years of electrical maintenance experience.</p></li><li><p>At least 3 years in a supervisory role involving High Voltage systems.</p></li><li><p>Experience in Oil & Gas, Utilities, Power Plants, Facilities Management, or Industrial Projects.</p></li><li><p>Experience working with HV systems up to 11kV, 33kV, or higher is preferred.</p></li></ul>

Job Purpose<br><br>The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements.<br><br>Key Responsibilities<br><br>Supervise and coordinate all offshore instrument commissioning activities.<br><br>Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities.<br><br>Review and implement approved commissioning procedures, method statements, test packs, and project specifications.<br><br>Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning.<br><br>Coordinate Commissioning Activities For<br><br>DCS, ESD, PLC, and SCADA systems<br><br>Fire & Gas (F&G) systems<br><br>Control valves and shutdown valves<br><br>Pressure, temperature, flow, and level instruments<br><br>Analyzers and metering systems<br><br>Package equipment instrumentation<br><br>Lead Cause & Effect testing and functional verification.<br><br>Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors.<br><br>Conduct system walkdowns and coordinate punch-list clearance.<br><br>Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams.<br><br>Monitor daily progress and provide regular reports to the Commissioning Manager.<br><br>Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly.<br><br>Support offshore start-up and operational readiness activities.<br><br>Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements.<br><br>Conduct toolbox talks and pre-job safety meetings.<br><br>Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel.<br><br>Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule.<br><br>Minimum Qualifications<br><br>Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline.<br><br>Relevant technical certification in Instrumentation and Control Systems.<br><br>Valid offshore safety certification such as BOSIET/FOET.<br><br>Valid offshore medical fitness certificate.<br><br>H2S certification, where required by the project.<br><br>Experience Requirements<br><br>Minimum 10 years of experience in Instrumentation and Control Systems.<br><br>Minimum 5 years of experience in commissioning and start-up activities.<br><br>Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer.<br><br>Previous experience in offshore Oil & Gas projects is highly preferred.

Job Purpose<br><br>The Instrument Commissioning Supervisor will be responsible for supervising and coordinating all offshore instrumentation and control system commissioning activities. The role requires strong experience in offshore oil and gas commissioning, pre-commissioning, start-up, and handover activities in accordance with client standards, approved project procedures, and HSE requirements.<br><br>Key Responsibilities<br><br>Supervise and coordinate all offshore instrument commissioning activities.<br><br>Plan and execute pre-commissioning, commissioning, testing, start-up, and handover activities.<br><br>Review and implement approved commissioning procedures, method statements, test packs, and project specifications.<br><br>Supervise instrument calibration, continuity checks, loop checking, functional testing, and system commissioning.<br><br>Coordinate Commissioning Activities For<br><br>DCS, ESD, PLC, and SCADA systems<br><br>Fire & Gas (F&G) systems<br><br>Control valves and shutdown valves<br><br>Pressure, temperature, flow, and level instruments<br><br>Analyzers and metering systems<br><br>Package equipment instrumentation<br><br>Lead Cause & Effect testing and functional verification.<br><br>Coordinate with DCS, ESD, F&G, package equipment, and instrument vendors.<br><br>Conduct system walkdowns and coordinate punch-list clearance.<br><br>Coordinate with Construction, Electrical, Mechanical, Process, Operations, and HSE teams.<br><br>Monitor daily progress and provide regular reports to the Commissioning Manager.<br><br>Ensure commissioning documentation, test sheets, checklists, and handover dossiers are completed correctly.<br><br>Support offshore start-up and operational readiness activities.<br><br>Ensure compliance with Permit to Work (PTW), LOTO, SIMOPS, JSA, and client HSE requirements.<br><br>Conduct toolbox talks and pre-job safety meetings.<br><br>Supervise and mentor Instrument Technicians, Engineers, and commissioning personnel.<br><br>Ensure all activities are completed safely, efficiently, and according to the approved commissioning schedule.<br><br>Minimum Qualifications<br><br>Diploma or Bachelor’s Degree in Instrumentation, Electronics, Control Systems, Electrical Engineering, or a related discipline.<br><br>Relevant technical certification in Instrumentation and Control Systems.<br><br>Valid offshore safety certification such as BOSIET/FOET.<br><br>Valid offshore medical fitness certificate.<br><br>H2S certification, where required by the project.<br><br>Experience Requirements<br><br>Minimum 10 years of experience in Instrumentation and Control Systems.<br><br>Minimum 5 years of experience in commissioning and start-up activities.<br><br>Proven experience as an Instrument Commissioning Supervisor, Lead Instrument Engineer, or Senior Instrument Commissioning Engineer.<br><br>Previous experience in offshore Oil & Gas projects is highly preferred.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1) Supervises and coordinates activities of workers engaged in erecting and maintaining metal tanks used to store liquid materials, such as crude oil, gasoline, and heating oil: Installs and maintains tank components, such as automatic gauges, valves, and vents. 2) Performs other duties as described under SUPERVISOR Master Title.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12th Passed &amp; Knowledge of Tank Supervisor</p><p></p></section>

Construction Supervisor (Mechanical)<br><br>Location: Mesaieed, Qatar<br><br>Sector: Oil & Gas (Midstream / Downstream)<br><br>Our client is seeking an experienced Construction Supervisor (Mechanical) to support the construction, installation, inspection, testing, and pre-commissioning phases of a major Oil & Gas project.<br><br>Requirements<br><br>Degree or Diploma in Mechanical Engineering (mandatory) Formal QA/QC functional training Minimum 10 years' experience in Oil & Gas construction projects Proven experience in Static and Rotating Equipment Installation Experience coordinating inspections during Midstream and/or Downstream facility construction of Oil and Gas Mandatory experience as an EPIC Contractor Supervisor Experience as a Client or PMC Supervisor preferred Strong knowledge of international standards and specifications including ASME, ANSI, API, ISO, NFPA, Shell DEP and related industry codes Experience with FAT, equipment alignment, inspection activities, pressure testing, punch list management, mechanical completion and pre-commissioning Extensive knowledge of coating systems including painting, galvanizing, wrapping, insulation and related preservation requirements Experience working in Greenfield and Brownfield environments Strong understanding of PTW, LOTO, tie-ins to live facilities, construction testing and commissioning interfaces Ability to read and interpret P&IDs, equipment layouts, mechanical drawings and manufacturer documentation. <br><br>Key Responsibilities<br><br>Supervise static and rotating equipment installation activities Coordinate inspections, RFIs and testing activities Monitor contractor compliance with approved procedures, specifications and project requirements Support mechanical completion, punch close-out and pre-commissioning activities Interface with QA/QC, HSE, vendors and project stakeholders to ensure safe and quality execution of work. <br><br>Interested candidates are encouraged to apply directly or send their CV to mahirah.marisa@airswift.com<br><br>Referrals are welcome too—feel free to share this opportunity with qualified professionals in your network. **Only shortlisted candidates will be contacted. Thank you for your kind understanding.<br><br>Deadline: 4 September 2026 (Any applications after this date will not be considered).

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Key Responsibilities</strong></p><br><br><p>* Supervise and coordinate all <strong>Lockout/Tagout (LOTO) </strong>activities at the project site.</p><br><br><p>* Ensure proper isolation of electrical, mechanical, hydraulic, pneumatic, and other hazardous energy sources.</p><br><br><p>* Review and implement approved LOTO procedures, isolation plans, and energy control requirements.</p><br><br><p>* Coordinate with Electrical, Mechanical, Instrumentation, Operations, HSE, and Commissioning teams to ensure safe isolation.</p><br><br><p>* Verify that all isolation points are correctly identified, locked, tagged, and documented before work begins.</p><br><br><p>* Ensure compliance with project LOTO procedures, Permit-to-Work (PTW) requirements, and applicable Qatar safety regulations.</p><br><br><p>* Conduct and supervise LOTO briefings/toolbox talks for personnel involved in isolation activities.</p><br><br><p>* Maintain accurate <strong>LOTO registers, isolation certificates, lock/tag records, and related documentation</strong>.</p><br><br><p>* Verify zero-energy conditions before authorizing work to commence.</p><br><br><p>* Ensure proper removal of locks and tags and safe restoration of equipment after completion of work.</p><br><br><p>* Coordinate LOTO activities during testing, pre-commissioning, commissioning, energization, and de-energization activities.</p><br><br><p>* Identify potential hazards associated with stored or residual energy and ensure appropriate control measures are implemented.</p><br><br><p>* Monitor field activities to ensure compliance with approved LOTO procedures.</p><br><br><p>* Stop unsafe work and immediately report any LOTO or energy-isolation violation.</p><br><br><p>* Participate in safety inspections, audits, incident investigations, and LOTO compliance reviews.</p><br><br><p>* Provide guidance and training to electricians, technicians, operators, and other personnel on LOTO requirements.</p><br><br><p>* Coordinate with the Permit-to-Work team to ensure isolation requirements are properly reflected in permits.</p><br><br><p>* Ensure all LOTO activities are properly handed over between shifts and work teams.</p><br><br><p>* Support the HSE team in maintaining a strong safety culture and achieving project safety objectives.</p><br><br><br><p><strong>Qualification Requirements</strong></p><br><br><p>* <strong>Bachelor's Degree (BE) in Electrical Engineering </strong>or <strong>Diploma in Electrical Engineering</strong>.</p><br><br><p>* Minimum 5 years of relevant experience as a LOTO Supervisor.</p><br><br><p>* Strong knowledge of electrical safety, energy isolation, LOTO procedures, and Permit-to-Work systems.</p><br><br><p>* Experience in industrial, infrastructure, oil &amp; gas, power, water treatment, or desalination projects is preferred.</p><br><br><p>* <strong>Qatar Energy LNG project approval/experience </strong>will be considered an added advantage.</p><br><br><p>* Good knowledge of safe isolation practices and hazardous energy control.</p><br><br><p>* Ability to read and understand electrical drawings, single-line diagrams, isolation plans, and related technical documents.</p><br><br><p>* Good communication and coordination skills.</p><br><br><p>* Ability to work effectively with multidisciplinary teams in a project environment.</p><br><br><p>* Familiarity with Qatar HSE requirements and international electrical safety standards is preferred.</p><br><br><br><p><strong>Experience</strong></p><br><br><p>* <strong>Minimum 5 years of relevant experience as a LOTO Supervisor</strong>, preferably within major industrial, oil &amp; gas, power, water treatment, or desalination projects.</p><br><br><p>* Candidates with previous <strong>Qatar Energy LNG-approved experience </strong>will have an added advantage.</p><br><br><p><strong>Key Skills</strong></p><br><br><p>* Lockout/Tagout (LOTO) Management</p><br><br><p>* Electrical Isolation</p><br><br><p>* Energy Isolation &amp; Verification</p><br><br><p>* Permit-to-Work (PTW)</p><br><br><p>* Electrical Safety</p><br><br><p>* Isolation Certificate Management</p><br><br><p>* Commissioning &amp; Energization Safety</p><br><br><p>* Risk Assessment &amp; Hazard Identification</p><br><br><p>* HSE Compliance</p><br><br><p>* Team Supervision &amp; Coordination</p><br><br><p>* Safety Auditing and Inspection</p><br><br><p>* Technical Documentation</p><br><br><br> <br><br> </div>

Job description:<br><br> Job Purpose The purpose of the role is to supervise and monitor Marine Operations carried out by and on behalf of the company, to ensure they are in line with international codes, classification society, flag state, local regulations, and company procedures. The job holder shall contribute and participate in the application of a robust marine crew, watercraft & contractor vetting and monitoring program to reduce the company’s exposure to major marine risk during it’s operational activity. JOB DIMENSIONS: The role requires a high level of proactivity and organizational skills and a high understanding of marine operations to ensure the departments’ activities are fully supported, documented, and safely delivered. Number of Vessels Supported: 8+ Number of Contracts Supported: 8+ Number of Vessels Audited: 16+ (annually) Number of Call for Tender: 5+ (annually) Key Accountabilities HSE Demonstrate an Incident Free attitude through establishing and maintaining a strong safety culture. Ensure all activities carried out under the supervision of the role comply with the companies HSE policy. Propose & monitor strategies and technology to support the companies GHG reduction targets. Support Marine Incident Investigations and reporting processes, ensuing identification of root causes and capturing of lessons learned. Financial Demonstrate a cost focus culture to ensure sustainable value is delivered. Demonstrate cost efficiency within the area of responsibility. Operations Support the Lead, Marine Operations in the creation and review of company CMS standards and guidelines. Support and encourage the development of local talent, ensuring development plans are followed, experience and knowledge shared. Support resolution orientated communication and strategic connection among critical stakeholders to implement solutions in a timely manner. Ensure CMS rules, standards, policies, and guidelines covering marine crew and watercraft are applied and monitored in accordance with international regulations and standards, classification society, flag state, local regulations, and company procedures. Maintain a robust marine vetting and assurance program, ensuring company charter vessels and crew are in full compliance with international regulations and standards, classification society, flag state, local regulations and company procedures. Support contract management, ensure vessels and owners are in full compliance with procedural and contractual requirements. Support operational changes, delivering solutions to improve efficiency and reliability. Ensure the N+1 & N+2 are routinely provided with highlights, concerns and trends related to company marine activity. Support project teams and key stakeholders with knowledge of operational standards, safety protocols and best practices in support of their marine operations. Participate in industry forums related to marine operations. Support the role of Marine Supervisor (JUB) during periods of sickness, and operational need. Maintain a robust marine vetting and assurance program, ensuring company charter vessels and crew are in full compliance with international regulations and standards, classification society, flag state, local regulations and company procedures. Support contract management, ensure vessels and owners are in full compliance with procedural and contractual requirements. Support operational changes, delivering solutions to improve efficiency and reliability. Ensure the N+1 & N+2 is routinely provided with highlights, concerns and trends related to company marine activity. Support project teams and key stakeholders with knowledge of operational standards, safety protocols and best practices in support of their marine operations. Participate in industry forums related to marine operations. Support the role of Marine Supervisor (JUB) during periods of sickness, and operational need. Work Schedule The role is based offshore, onboard company charter watercraft on a 28/28 rotational basis. Requirement for occasional assignment onshore in companies Doha office. Competencies Demonstrate Adaptability in Managing Complex Situations Demonstrate Learning Agility and Drive Innovation Develop Others and Institutionalise Knowledge Improve Safety, Technical Proficiency and Results Management of Vessels in the Field Marine Vessel Movements (Offshore) Education Master Mariner, Chief Engineer, Marine Warranty Surveyor, Merchant Naval Officer / Engineer, or Degree Equivalent Experience 8 years of marine & offshore installation experience with 2+ years at a Senior level. Demonstrable knowledge and experience of DP systems, operations, trials and standards. Extensive knowledge and experience of marine operations in support of offshore oil and gas activity Good knowledge of international maritime regulations, standards, and codes Experienced in carrying our marine assurance and technical writing Job-Specific Skills: Capable supporting multiple activities with a high degree of accuracy against defined deadlines Excellent verbal and written English skills Strong technical and problem solving skills Strong supervisory, communication, and interpersonal skills Strong organizational, coordination, planning and interface skills High level of proactivity, negotiating and influential skills Proficient in MS Office suite of software programs

Job description:<br><br> Job Purpose The purpose of the role is to supervise and monitor Marine Operations carried out by and on behalf of the company, to ensure they are in line with international codes, classification society, flag state, local regulations, and company procedures. The job holder shall contribute and participate in the application of a robust marine crew, watercraft & contractor vetting and monitoring program to reduce the company’s exposure to major marine risk during it’s operational activity. JOB DIMENSIONS: The role requires a high level of proactivity and organizational skills and a high understanding of marine operations to ensure the departments’ activities are fully supported, documented, and safely delivered. Number of Vessels Supported: 8+ Number of Contracts Supported: 8+ Number of Vessels Audited: 16+ (annually) Number of Call for Tender: 5+ (annually) Key Accountabilities HSE Demonstrate an Incident Free attitude through establishing and maintaining a strong safety culture. Ensure all activities carried out under the supervision of the role comply with the companies HSE policy. Propose & monitor strategies and technology to support the companies GHG reduction targets. Support Marine Incident Investigations and reporting processes, ensuing identification of root causes and capturing of lessons learned. Financial Demonstrate a cost focus culture to ensure sustainable value is delivered. Demonstrate cost efficiency within the area of responsibility. Operations Support the Lead, Marine Operations in the creation and review of company CMS standards and guidelines. Support and encourage the development of local talent, ensuring development plans are followed, experience and knowledge shared. Support resolution orientated communication and strategic connection among critical stakeholders to implement solutions in a timely manner. Ensure CMS rules, standards, policies, and guidelines covering marine crew and watercraft are applied and monitored in accordance with international regulations and standards, classification society, flag state, local regulations, and company procedures. Maintain a robust marine vetting and assurance program, ensuring company charter vessels and crew are in full compliance with international regulations and standards, classification society, flag state, local regulations and company procedures. Support contract management, ensure vessels and owners are in full compliance with procedural and contractual requirements. Support operational changes, delivering solutions to improve efficiency and reliability. Ensure the N+1 & N+2 are routinely provided with highlights, concerns and trends related to company marine activity. Support project teams and key stakeholders with knowledge of operational standards, safety protocols and best practices in support of their marine operations. Participate in industry forums related to marine operations. Support the role of Marine Supervisor (JUB) during periods of sickness, and operational need. Maintain a robust marine vetting and assurance program, ensuring company charter vessels and crew are in full compliance with international regulations and standards, classification society, flag state, local regulations and company procedures. Support contract management, ensure vessels and owners are in full compliance with procedural and contractual requirements. Support operational changes, delivering solutions to improve efficiency and reliability. Ensure the N+1 & N+2 is routinely provided with highlights, concerns and trends related to company marine activity. Support project teams and key stakeholders with knowledge of operational standards, safety protocols and best practices in support of their marine operations. Participate in industry forums related to marine operations. Support the role of Marine Supervisor (JUB) during periods of sickness, and operational need. Work Schedule The role is based offshore, onboard company charter watercraft on a 28/28 rotational basis. Requirement for occasional assignment onshore in companies Doha office. Competencies Demonstrate Adaptability in Managing Complex Situations Demonstrate Learning Agility and Drive Innovation Develop Others and Institutionalise Knowledge Improve Safety, Technical Proficiency and Results Management of Vessels in the Field Marine Vessel Movements (Offshore) Education Master Mariner, Chief Engineer, Marine Warranty Surveyor, Merchant Naval Officer / Engineer, or Degree Equivalent Experience 8 years of marine & offshore installation experience with 2+ years at a Senior level. Demonstrable knowledge and experience of DP systems, operations, trials and standards. Extensive knowledge and experience of marine operations in support of offshore oil and gas activity Good knowledge of international maritime regulations, standards, and codes Experienced in carrying our marine assurance and technical writing Job-Specific Skills: Capable supporting multiple activities with a high degree of accuracy against defined deadlines Excellent verbal and written English skills Strong technical and problem solving skills Strong supervisory, communication, and interpersonal skills Strong organizational, coordination, planning and interface skills High level of proactivity, negotiating and influential skills Proficient in MS Office suite of software programs

Job Overview<br><br>An established organization is seeking an experienced Security Supervisor to lead and oversee security operations across commercial facilities. The successful candidate will be responsible for supervising security personnel, ensuring compliance with security procedures, coordinating emergency response activities, and maintaining a safe and secure environment for clients, employees, and visitors.<br><br>Key Responsibilities<br><br>Supervise and coordinate security officers during assigned shifts. Monitor access control systems and CCTV operations to ensure effective site security. Conduct routine site patrols, inspections, and security checks. Manage security incidents, investigations, and incident reporting. Ensure compliance with company policies, client requirements, and established security procedures. Coordinate and support emergency response activities when required. Train, mentor, and evaluate security personnel to maintain high performance standards. Prepare daily, weekly, and incident reports for management and clients.<br><br>Requirements<br><br>Minimum 5 years of experience in the security industry. Previous experience in a supervisory or team leadership role. Fluent in Arabic and English (spoken and written). Willing and able to attend client interviews prior to deployment. Strong leadership, communication, and problem-solving skills. Ability to manage teams, respond effectively to incidents, and maintain operational discipline.<br><br>Preferred Qualifications<br><br>Security-related certifications. Valid First Aid Certificate. Valid Qatar Driving Licence.

Job Overview<br><br>An established organization is seeking an experienced Security Supervisor to lead and oversee security operations across commercial facilities. The successful candidate will be responsible for supervising security personnel, ensuring compliance with security procedures, coordinating emergency response activities, and maintaining a safe and secure environment for clients, employees, and visitors.<br><br>Key Responsibilities<br><br>Supervise and coordinate security officers during assigned shifts. Monitor access control systems and CCTV operations to ensure effective site security. Conduct routine site patrols, inspections, and security checks. Manage security incidents, investigations, and incident reporting. Ensure compliance with company policies, client requirements, and established security procedures. Coordinate and support emergency response activities when required. Train, mentor, and evaluate security personnel to maintain high performance standards. Prepare daily, weekly, and incident reports for management and clients.<br><br>Requirements<br><br>Minimum 5 years of experience in the security industry. Previous experience in a supervisory or team leadership role. Fluent in Arabic and English (spoken and written). Willing and able to attend client interviews prior to deployment. Strong leadership, communication, and problem-solving skills. Ability to manage teams, respond effectively to incidents, and maintain operational discipline.<br><br>Preferred Qualifications<br><br>Security-related certifications. Valid First Aid Certificate. Valid Qatar Driving Licence.

Job Title: Pre Commissioning Supervisor-Piping Job Location: Ras Laffan<br>Job Summary:We are seeking an experienced Pre-Commissioning Supervisor – Piping to lead and coordinate pre-commissioning activities for major Oil & Gas projects. The successful candidate will be responsible for planning, supervising, and executing piping pre-commissioning activities while ensuring compliance with project specifications, safety standards, and completion procedures. The role requires strong technical expertise in piping systems, commissioning documentation, and project handover.<br>Mandatory Requirements & Qualifications:Experience:Minimum 7 years of experience as a Pre-Commissioning Engineer/Supervisor in the Oil & Gas industry. Experience on EPC projects involving piping systems. Ras Laffan project experience will be an added advantage. Education:Diploma or B. Tech in Mechanical Engineering. Technical Skills:Strong knowledge of piping pre-commissioning and commissioning activities. Experience preparing Method Statements, JSAs, Work Packs, and commissioning documentation. Familiarity with completions management systems and project handover processes. Knowledge of SHES requirements and industry safety standards. Ability to prepare schedules, resource plans, and progress reports. Good command of written and spoken English.<br>Mandatory Criteria:Must have Oil & Gas pre-commissioning experience. Minimum 7 years of relevant experience. Mechanical Engineering qualification (Diploma/B. Tech). Ability to join projects in Qatar. Ras Laffan project experience is preferred.<br>Key Responsibilities:Review project engineering, technical, and SHES documentation before execution. Prepare Pre-Commissioning Method Statements, JSAs, and work packs. Plan and coordinate pre-commissioning schedules, manpower, and resources. Identify and arrange required tools, test equipment, temporary facilities, consumables, lubricants, and third-party services. Coordinate with the Completions team to update system and sub-system completion databases. Participate in constructability reviews to ensure smooth pre-commissioning and handover. Ensure all commissioning records, documentation, and handovers comply with project procedures. Promote and maintain a strong safety culture throughout all pre-commissioning activities. Monitor progress and prepare accurate daily, weekly, and monthly status reports. Coordinate with construction, QA/QC, commissioning, and client teams to achieve timely project completion.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44218&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Mechanical Supervisor (PRV ) M/F </p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>5 years</p><br><br> Job description <br><br><p>We currently have an opportunity within SPIE Global Services Energy, Qatar, for a:</p><br><br><p><strong>Mechanical Supervisor (PRV )&nbsp;</strong></p><br><br><br><p>Duties and Responsibilities</p><br><br><p>• Reports to the nominated Qatargas Maintenance Supervisor.<br>• Ensure compliance at all times with Qatargas Permit to work procedure, safety procedure, Environmental Health, Safety and security procedures, as well as occupational health and safety regulations.<br>• Conducts toolbox talk for maintenance crew and ensure safety measures are in place as stipulated in Job Safety Assessment prior to starting the job.<br>• Observe safety hazards, unsafe condition and near miss and report as per reporting procedure.<br>• Directs and provide close onsite supervision of all Mechanical maintenance jobs performed by the technicians in the assigned area within Qatargas facilities.<br>• Manages the operation of Tool Store ensuring that consumables are regularly reordered and refurbished and damaged tools are replaced promptly.<br>• Participates in the execution of major maintenance and main shutdowns. This includes highlighting specific items of equipment/spare parts which require Maintenance Workshop involvement, assessing resources, material and logistic requirements.<br>• Quality Control Measures for all Maintenance-related activities using checklist.<br>• Organizing skills to form a team of Valve technicians during any major Shutdowns and Turnarounds<br>• Capable of understanding valve data sheets, assembly drawings and cross sectional drawings.<br>• Capable of understanding control valve testing procedure as per leakage class<br>• Identification of Spare parts and prioritization, and Select the right size &amp; types of tools.</p><br><br><p>• Direct Mechanical maintenance related works, provide routine onsite supervision, checks work progress of subordinates and provide guidance / direction to technician in solving complex problem.<br>• Review work notifications, plans execution, manages work orders and ensures PPM compliance and records are updated in SAP, filed &amp; signed as appropriate.<br>• Co-ordinates remedial actions for faults encountered. This includes participating in diagnosis and repair of faults and breakdowns.<br>• Participates in the review of Preventive Maintenance program and recommends necessary changes based on maintenance history.<br>• Prepares records of validation data and details of maintenance activities updates system as required.<br>• Compiles and submits reports on incidents and failure investigations as and when required.<br>• Ensure all tools and test equipment is available for fieldwork team to execute the daily activities.<br>• Evaluates and reports on maintenance needs and priorities in his area of responsibility.<br>• Participate in Bad Actor and Root Cause Failure Analysis and make recommendations for improvement.<br>• Ability to understand technical &amp; maintenance problems and develop a structured work pack, plan and execution</p><br><br> <br> Profile <br><p>Experience, Knowledge and skills</p><br><br><p><br>Educational Qualifications: Minimum Higher Secondary School Education plus a three-year technical<br>diploma (HNC, HND or equivalent) in Mechanical from a recognized institution.<br>Relevant Work Experience: Minimum of 10 years of maintenance experience with at least 5 years supervisory level on field equipment in diversified oil &amp; gas processing or petrochemical plants. PRV workshop Experience is Mandatory.<br>Computer Skills: Computer literate with knowledge of SAP and commonly used Microsoft business software packages required.<br>English Language Skills: Good written and oral communication skills in English.<br>Certification: Certificate from a specialist Bolting Company as a Torque machine operator.</p><br><br><p><br>Job Specific Requirements:<br>• Good knowledge and troubleshooting of Mechanical, pneumatic, hydraulic systems.<br>• Experience and knowledge in the troubleshooting, maintenance, overhaul, temporary repairs and commissioning stationary equipment such as Vessels, Columns, Heat Exchangers, Steam Traps, Piping Systems, Process Valves, Conveyor Belt System, Filters, etc.<br>• Good knowledge in Rotating equipment such as turbo-machinery maintenance and troubleshooting on gas and steam turbines, compressors (centrifugal and reciprocating), pumps, mechanical seals, gear box, fans and blowers and other machinery related equipment / devices such as gearbox, etc.<br>• Able to carry out measurements, rotating equipment alignment (dial &amp; laser). Sufficient experience &amp; knowledge in vibration measurement, gas turbine &amp; compressor anti-surge systems.<br>• Should be able to understand Piping &amp; Instrumentation Diagrams, Data Sheets, Process Flow Diagrams, Loop Drawings and Cause &amp; Effect, Function Block &amp; Ladder Logic Diagrams.<br>• Familiar with a permit to work system and LOTO and temporary defeat system procedures.<br>• Good adaptability to multinational environment with wide exposure to various cultures and customs.<br>• A strong focus on safety is paramount and practical knowledge of permit to work systems and lock out procedures applicable to LNG / Petrochemical plants is required.<br>• Familiar with and experienced in working with H2S rich process.</p><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> RAS LAFFAN <br>Candidate criteria Minimum level of experience required <p>10 years or more</p><br><br> Required authorisations <br><p>NA</p><br><br> <br> Languages <p>English (C-Professional working proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities.</p><br><br> <br> <br><br> </div>

Construction Supervisor (Mechanical) - Qatar<br><br>We are currently seeking an experienced Construction Supervisor (Mechanical) for a major Oil & Gas project in Qatar.<br><br>Qualifications<br><br>Degree or Diploma in Mechanical Engineering from a recognized university. Formal QA/QC training is preferred.<br><br>Experience Requirements<br><br>Minimum 10 years' experience in static and rotating equipment installation within midstream/downstream Oil & Gas facilities. Experience as an EPIC Contractor Supervisor is essential. Experience in Qatar or other GCC countries is required. Strong knowledge of international codes and standards such as ASME, ANSI, ISO, API, NFPA, and SHELL DEP. Experience in:Static & Rotating Equipment Installation FAT, Alignment & Inspection Pressure Testing Pre-Commissioning Activities Mechanical Completion & Punch List Closure Coating, Painting, Galvanizing, Wrapping, Insulation & Refractory Systems Greenfield and Brownfield Projects Permit to Work (PTW), LOTO, and Live Plant Tie-ins Lifting Plans and Crane Studies Key Responsibilities<br><br>Supervise static and rotating equipment installation and inspection activities in accordance with approved engineering documents and project schedules. Review construction documentation including Method Statements, JHAs, and material approvals. Attend RFIs and ensure construction activities comply with approved ITPs and quality standards. Lead and coordinate contractors on all mechanical installation activities. Manage FATs, alignment inspections, pressure testing, pre-commissioning, reinstatement, and mechanical completion activities. Conduct site inspections, monitor work progress, and ensure compliance with contractual, safety, and quality requirements. Support PSSR activities, startup preparations, and operations interface activities. Review and contribute to as-built documentation and project handover requirements. Ensure strict compliance with HSE regulations and Permit to Work procedures.<br><br>Skills<br><br>Strong leadership, communication, coordination, and problem-solving abilities. Ability to read and interpret P&IDs, GA Drawings, Equipment Layouts, Structural Drawings, and Manufacturer Manuals. Proficient in MS Office applications and relevant engineering software.<br><br>Interested candidates are invited to send their updated CV to:<br><br>norniqmah.abkarim@airswift.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are looking for an experienced Yard Supervisor to oversee daily yard operations, manpower, equipment, and material movement.<br> The candidate will ensure efficient yard activities while maintaining high standards of safety, housekeeping, and operational compliance.<br> Responsibilities Supervise and coordinate daily yard operations and manpower.<br> Manage the movement, handling, loading, unloading, and storage of materials and equipment.<br> Ensure proper yard organization, housekeeping, and material identification.<br> Coordinate with logistics, marine, operations, and maintenance teams.<br> Monitor yard equipment and report maintenance requirements.<br> Ensure compliance with HSE policies, PPE requirements, and safe work procedures.<br> Prepare daily yard activity reports and maintain operational records.<br> Resolve operational issues and ensure smooth and timely yard activities.<br> Minimum 5 years of experience in yard operations, marine, shipyard, logistics, or industrial environments.<br> Diploma or Bachelor’s degree in Logistics, Marine, Engineering, Operations, or a related field.<br> Proven experience supervising yard activities, manpower, equipment, loading/unloading, and material handling.<br> Strong knowledge of HSE procedures and safe working practices.<br> Good leadership, communication, coordination, and problem-solving skills.<br> Experience with yard documentation, inventory/material tracking, and daily operational reporting.<br> Marine/shipyard experience is highly preferred.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li><p><span>Oversee site activities during night operations, ensuring productivity and adherence to schedules.</span><br></p><br></li><li><p><span>Assign tasks, monitor progress, and manage manpower on site.</span><br></p><br></li><li><p><span>Ensure construction works meet approved drawings, specifications, and standards.</span><br></p><br></li><li><p><span>Enforce HSE policies, conduct toolbox talks, and ensure compliance with Qatar government safety approvals.</span><br></p><br></li><li><p><span>Prepare daily progress and incident reports for submission to project engineers and managers.</span><br></p><br></li><li><p><span>Address site issues, defects, and rework requirements during night operations.</span><br></p><br></li><li><p><span>Verify availability of materials, tools, and equipment for uninterrupted night shift work.</span><br></p><br></li></ul><br><span>Requirements</span><ul><li><p><span>Diploma / Bachelor’s degree in Civil Engineering or Construction Management (preferred).</span><br></p><br></li><li><p><span>Minimum <b>10</b><b> years’ experience</b> as Site Supervisor / Foreman in large‑scale construction projects.</span><br></p><br></li><li><p><span>Previous <b>Qatar government project approvals</b> (mandatory).</span><br></p><br></li><li><p><span>Strong knowledge of construction methods, finishing works, and site execution practices.</span><br></p><br></li></ul><br> </div>