Data Entry Jobs - Al Khor Qatar

<ul><li><p><strong><u>Operations Management</u></strong></p><ul><li><p>Supervise and coordinate industrial cleaning projects including tank cleaning, sludge removal, heat exchanger cleaning, pipeline flushing, and confined space entry operations.</p></li><li><p>Ensure compliance with HSE standards, ISO, and local regulatory requirements.</p></li><li><p>Monitor daily operations, allocate manpower, and manage equipment utilization (Hydro Jetting, Super Sucker, vacuum trucks, etc.).</p></li></ul></li><li><p><strong><u>Technical Expertise</u></strong></p><ul><li><p>Provide technical guidance on cleaning methodologies for storage tanks, separators, reactors, boilers, and heat exchangers.</p></li><li><p>Evaluate sludge characterization and recommend safe disposal/recycling methods.</p></li><li><p>Support troubleshooting of cleaning challenges in oil & gas and petrochemical facilities.</p></li></ul></li><li><p><strong><u>Client & Stakeholder Management</u></strong></p><ul><li><p>Liaise with clients, contractors, and regulatory authorities to ensure smooth project execution.</p></li><li><p>Prepare technical proposals, work scopes, and cost estimates for tenders and ongoing projects.</p></li><li><p>Maintain strong client relationships to secure repeat business.</p></li></ul></li><li><p><strong><u>Team Leadership</u></strong></p><ul><li><p>Train and mentor supervisors, technicians, and operators in safe and efficient cleaning practices.</p></li><li><p>Conduct toolbox talks, safety drills, and performance evaluations.</p></li><li><p>Promote a culture of continuous improvement and operational excellence.</p></li></ul></li><li><p><strong><u>Reporting & Documentation</u></strong></p><ul><li><p>Prepare daily progress reports, incident reports, and project closure documentation.</p></li><li><p>Track KPIs such as turnaround time, resource efficiency, and safety compliance.</p></li><li><p>Support management in CAPEX/OPEX planning and budgeting.</p></li></ul></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Chemical Engineering, Environmental Engineering, or related discipline.</p></li><li><p>Minimum 6–8 years of experience in industrial cleaning/waste management, with at least 2-3 years in supervisory or assistant managerial role.</p></li><li><p>Strong knowledge of:</p><ul><li><p>Tank cleaning, sludge removal, heat exchanger cleaning, pipeline descaling</p></li><li><p>Hydro Jetting, Super Sucker, vacuum trucks, chemical cleaning methods</p></li><li><p>Oil & Gas and Petrochemical plant operations in GCC</p></li></ul></li><li><p>Familiarity with HSE regulations, confined space entry, and hazardous waste handling.</p></li><li><p>Strong knowledge of rotating equipment, pumps, compressors, and waste management systems.</p></li><li><p>Excellent communication, leadership, and client management skills.</p></li></ul><br><p><strong><u>Preferred Certifications</u></strong></p><ul><li><p>NEBOSH / IOSH (Health & Safety)</p></li><li><p>Confined Space Entry & Rescue</p></li><li><p>ISO 14001 / ISO 45001 awareness</p></li></ul><p><strong><u>Competencies</u></strong></p><ul><li><p>Strong analytical and problem-solving skills</p></li><li><p>Ability to manage multiple projects under tight deadlines</p></li><li><p>Risk awareness and proactive safety mindset</p></li><li><p>Team leadership and cross-functional collaboration</p></li><li><p>Client-focused with commercial acumen</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> Lead the development and implementation of IT strategies that align with business goals, ensuring technology investments support growth and efficiency. Oversee the management of IT infrastructure, including servers, networks, and data centers, to maintain high availability and performance. Manage IT budgets, ensuring cost-effective solutions while maximizing return on investment through strategic vendor partnerships. Implement robust cybersecurity measures and policies to protect sensitive data and mitigate risks associated with digital threats. Coordinate IT projects from conception to completion, ensuring they are delivered on time, within scope, and on budget. Establish and maintain IT service management (ITSM) processes to enhance service delivery and user satisfaction across the organization. Lead and mentor the IT team, fostering a culture of continuous learning and professional development to retain top talent. Conduct regular assessments of technology trends and innovations, identifying opportunities for the organization to leverage new tools and solutions. Ensure compliance with industry regulations and standards, including data protection laws and IT governance frameworks. Act as a bridge between IT and other departments, facilitating communication and collaboration to drive technology adoption.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> Bachelor's degree in Computer Science, Information Technology, or a related field; a Master's degree is a plus. Minimum 5 years of experience in IT management, with a proven track record of leading technology initiatives in a corporate environment. Relevant certifications such as ITIL, PMP, or CISSP to validate expertise in project management and cybersecurity. Experience in industries like finance, healthcare, or technology, showcasing adaptability to different business environments. Fluency in English is essential, while additional languages such as Spanish or Mandarin are advantageous for global communication. Strong technical skills in network management, cloud computing, and data analytics to drive informed decision-making. Exceptional leadership abilities to inspire and motivate teams while managing diverse personalities and skill sets. Excellent problem-solving skills, enabling the candidate to navigate complex IT challenges and devise effective solutions. Demonstrated ability to manage budgets and financial forecasts, ensuring efficient use of resources. A proactive mindset with a passion for emerging technologies, ensuring the organization stays ahead of the competition.</p><p></p></section>

<br><ul><li><p>As a Subject Matter Expert (SME), the Rigging Foreman [Workshop & Project Rigging & Movement Logistics] provides the technical & technological problem-solving ability of production engineering process and planning abilities in order to lead work teams and control production process for material handling, movement and coordination of piping systems and their components between workshops. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing safe material lifts and movements of piping systems between workshops and projects.</p></li><li><p>Specialize for critical lifting and rigging activities including arranging of crane and forklift service.</p></li><li><p>Responsible for all pipe shop & onboard piping logistics such as pipe and material movements.</p></li><li><p>Leads a rigging group, that ensure loads are secure, lifted according to yard safety standards</p></li><li><p>Coordinates with crane operator to ensure work schedules are not interrupted. All crane lifts need to ensure materials are on location before work starts.</p></li><li><p>Coordinate for forklift operation to shift pipes.</p></li><li><p>Coordinate with Production Engineer (in charge) for sending pipe for coating (blast/paint/galvanize)</p></li><li><p>Coordinate with transport section to arrange transport for outside yard operations i.e., galvanizing and afloat service.</p></li><li><p>Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way.</p></li><li><p>Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate</p></li><li><p>Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt & Project Postmortem) after completion of vessel</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical, or equivalent working experience and Qualified as Rigging Supervisor in Shipyard and Offshore & Onshore Projects. Experience: At least 8 years’ relevant working experience Lead in Shipyard Rigging & Lifting. &nbsp;(at least 3 years of experience as Assistant Rigging Foreman role).</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>** PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES **</p><br><p>Job Summary and Purpose</p><p>Supervise, Oversee and manage dimensional control survey activities to ensure all structural assemblies and piping spools meet specified dimensions and tolerances. Provide assurance that dimensional surveys are carried out on fabricated structures and piping spools, including all fabrication marine interfaces.</p><p>Accountabilities</p><ul><li><p>Develop, plan, and implement dimensional survey programs in accordance with project specifications and schedules, ensuring optimal use of resources, tools, and equipment.</p></li><li><p>Review and interpret project drawings, models, and specifications to prepare a comprehensive Dimensional Control / Measurement Plan, identifying intervention points in coordination with the Project Quality Lead.</p></li><li><p>Plan and execute surveying and dimensional verification activities for fabrication, assembly, and installation phases, ensuring all mating interfaces (fabrication, marine, structural, piping, and module connections) are accurately measured and that “best-fit” alignment scenarios are evaluated and established.</p></li><li><p>Ensure strict adherence to the Dimensional Control Inspection &amp; Test Plan (DC ITP) at all stages of project execution, and update the plan to incorporate design revisions or scope changes.</p></li><li><p>Review, validate, and formally approve dimensional control reports, submitting them to the Project Lead or Client Representative as required.</p></li><li><p>Maintain detailed and traceable records of all dimensional inspections, survey data, and control activities in accordance with project and company documentation standards.</p></li><li><p>Manage and track all Dimensional Control (DC) survey requests, ensuring timely completion, accurate documentation, and clear reporting of results.</p></li><li><p>Verify that all surveying instruments and equipment (e.g., Leica, SOKKIA, Topcon) are calibrated, certified, and within validity before use.</p></li><li><p>Ensure all Dimensional Control personnel are working with the latest approved drawings and project specifications (AFC status).</p></li><li><p>Liaise and coordinate with Client Discipline Representatives, production team, Quality Inspectors, and Fabrication Leads to resolve dimensional discrepancies and ensure alignment with project requirements.</p></li><li><p>Supervise and mentor Sr./dimensional controllers, providing guidance, training, and technical oversight to ensure high-quality deliverables.</p></li><li><p>Promote teamwork and effective communication between fabrication, installation, and survey teams to achieve dimensional accuracy and schedule compliance.</p></li><li><p>Employee should prioritize the wellbeing of themselves and their colleagues while maintaining a safe and healthy work Environment. Adhere to all health &amp; safety protocols, participate in wellbeing &amp; wellness programs, and propty report any concerns regarding the wellbeing of oneself &amp; others in order to foster a culture of best practice.</p></li><li><p>Support Fit-Up, Alignment, and Weld Visual Inspections as required to verify structural and piping accuracy prior to welding or assembly.</p></li><li><p>Perform other tasks or assignments as directed by the Head of QSA / Project Engineer/Lead / Quality Manager in line with project objectives.</p></li><li><p>Perform other duties or assignments as directed (Fit up inspections, weld visual inspections etc).</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications:</p><ul><li><p>Bachelor’s Degree (4 years) or Diploma (3 years) in a relevant technical discipline, preferably in accredited Civil /Mechanical Engineering or related field.</p></li><li><p>Proficient in AutoCAD and other drafting/design software.</p><br></li></ul><p>Experience:</p><ul><li><p>Minimum 6 years of total experience in surveying, dimensional control, and alignment activities within EPIC / EPC industrial projects.</p></li><li><p>At least 3 years in a senior or supervisory role overseeing dimensional control teams, coordinating survey operations, and ensuring compliance with project quality standards.</p></li><li><p>Extensive hands-on experience with precision surveying and measurement equipment such as SOKKIA, Leica, Topcon, or equivalent instruments.</p></li><li><p>Demonstrated expertise in the surveying and dimensional verification of structural assemblies, piping spools, and modular components during fabrication and installation stages.</p></li><li><p>Proficient in reading and interpreting structural drawings, piping isometrics (ISO), GA drawings, and fabrication layouts.</p></li><li><p>Strong understanding of fabrication, assembly, and installation tolerances in accordance with international and project-specific standard</p></li></ul><p></p></section>