Architect Jobs in Qatar

Responsibilities<br><br> Conduct preventive and corrective maintenance activities to ensure the efficient and reliable operation of equipment and machinery Troubleshoot and diagnose problems and develop and execute maintenance plans to minimize downtime and disruptions Analyst data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance Collaborate with production teams, management and suppliers to develop and execute maintenance plans that meet organization goals and priorities Ensure that those conducting maintenance activities are in compliance with safety standards and regulations, and identify and mitigate potential safety hazards Develop and maintain technical documentation, schematics and procedures to support maintenance activities Participate in ongoing training and development programmer to enhance skills and knowledge <br><br>Qualifications<br><br> A bachelor's degree in engineering or a related field 3 years of relevant work experience in mechanical, electrical or industrial maintenance Strong understanding of engineering principles and knowledge of equipment and machinery Ability to analyst information, diagnose problems and develop solutions <br><br>This job is provided by Shine.com

Responsibilities<br><br> Conduct preventive and corrective maintenance activities to ensure the efficient and reliable operation of equipment and machinery Troubleshoot and diagnose problems and develop and execute maintenance plans to minimize downtime and disruptions Analyst data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance Collaborate with production teams, management and suppliers to develop and execute maintenance plans that meet organization goals and priorities Ensure that those conducting maintenance activities are in compliance with safety standards and regulations, and identify and mitigate potential safety hazards Develop and maintain technical documentation, schematics and procedures to support maintenance activities Participate in ongoing training and development programmer to enhance skills and knowledge <br><br>Qualifications<br><br> A bachelor's degree in engineering or a related field 3 years of relevant work experience in mechanical, electrical or industrial maintenance Strong understanding of engineering principles and knowledge of equipment and machinery Ability to analyst information, diagnose problems and develop solutions <br><br>This job is provided by Shine.com

Responsibilities<br><br> Conduct preventive and corrective maintenance activities to ensure the efficient and reliable operation of equipment and machinery Troubleshoot and diagnose problems and develop and execute maintenance plans to minimize downtime and disruptions Analyst data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance Collaborate with production teams, management and suppliers to develop and execute maintenance plans that meet organization goals and priorities Ensure that those conducting maintenance activities are in compliance with safety standards and regulations, and identify and mitigate potential safety hazards Develop and maintain technical documentation, schematics and procedures to support maintenance activities Participate in ongoing training and development programmer to enhance skills and knowledge <br><br>Qualifications<br><br> A bachelor's degree in engineering or a related field 3 years of relevant work experience in mechanical, electrical or industrial maintenance Strong understanding of engineering principles and knowledge of equipment and machinery Ability to analyst information, diagnose problems and develop solutions <br><br>This job is provided by Shine.com

Responsibilities<br><br> Conduct preventive and corrective maintenance activities to ensure the efficient and reliable operation of equipment and machinery Troubleshoot and diagnose problems and develop and execute maintenance plans to minimize downtime and disruptions Analyst data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance Collaborate with production teams, management and suppliers to develop and execute maintenance plans that meet organization goals and priorities Ensure that those conducting maintenance activities are in compliance with safety standards and regulations, and identify and mitigate potential safety hazards Develop and maintain technical documentation, schematics and procedures to support maintenance activities Participate in ongoing training and development programmer to enhance skills and knowledge <br><br>Qualifications<br><br> A bachelor's degree in engineering or a related field 3 years of relevant work experience in mechanical, electrical or industrial maintenance Strong understanding of engineering principles and knowledge of equipment and machinery Ability to analyst information, diagnose problems and develop solutions <br><br>This job is provided by Shine.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Ensures that the quality of engineering, design, procurement, construction, installation of new equipment and repair, modifications of onshore and offshore facilities is consistent with the Codes, Standards, Specifications and Company Policies and Procedures.</li> </ul><br><ul> <li>Supervise the activities of QA/QC Inspectors, Contract hired Engineers/Inspectors and ND Technicians to ensure compliance with procedure requirements and perform the supervisory function at the level established for the position.</li> <li>Conduct metallurgical failure analysis on failed plant or offshore components to establish the cause of failure and recommendations. This involves preparation of the survey plan, mobilizing the Contractor, leading and supervising the activities.</li> <li>Provide support to relevant Dept for QA/QC matters related to procurement of materials and equipment. Review purchase requisition for Inspection and certification requirements, technical bid evaluation, appointment of TPI and ensuring the inspection of material receiving at warehouse.</li> <li>Review and approve all critical repair instructions including Welding Procedure Specification(WPS), Procedure Qualification Records (PQR) and QA/QC reports that are generated by QA/QC Inspectors and Engineers and specify alternative testing and inspection methods as applicable for repair or modification.</li> <li>Participate and provide necessary inputs for Startup Readiness, Lessons learnt, Formal Risk Assessment (FRA), Engineering Management of Change (EMOC) and Root Cause Failure Analysis (RCFA) from QA/QC perspective.</li> <li>Review and provide technical input on the Scope of Work (SOW) for Maintenance contracts related to repair and modification works, performing Technical Bid evaluations for the contracts, review and approve all Contractor documents and ensure compliance to QA/QC requirements during execution including shutdowns.</li> <li>Carryout technical audits as requested on suppliers and contractors Quality Management Systems and provide technical evaluation and recommendation. Perform follow up for the observations and corrective actions.</li> <li>Plan and ensure timely execution of inspection and certification of Gas Cylinders, Portable Tanks and Lifting Equipment as per QA/QC section KPI.</li> <li>Promote quality awareness among OES-Maintenance, Supply Department and Contractors through training, knowledge sharing, and procedure roll out sessions.</li> <li>Complete understanding of Policies and Procedures for Project and Plant QA/QC, eg: Material receiving Inspection, Control of Welding, Pressure testing and assist in revision or updating of the same including support for various other QA/QC Procedures.</li> </ul><br><ul> <li>Bachelor's degree in Engineering</li> <li>Professional certifications in welding, NDT, Inspection or Auditing</li> <li>6 years' experience in QA/QC related activities with the Oil and Gas industry.</li> <li>Proficiency in the field of design, engineering, procurement, fabrication, inspection and installation of process equipment and piping, including troubleshooting of welding and QA/QC issues.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance </li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> <li><strong>Duration:</strong><ul> <li>15 months to 24 months, with possible extension</li> </ul></li> <li><strong>Location:</strong><ul> <li>Qatar Onshore</li> </ul></li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Identify safe, reliable and efficient machine operation and failure modes with mitigation plans and provide expert condition monitoring analysis and recommendations of rotating equipment across multiple assets.</li> </ul><br><ul> <li>Provide expert troubleshooting skills and recommendations in the analysis of complex failure modes of rotating equipment.</li> <li>Conduct rotating equipment investigations and ensure machinery operations in safe, reliable and efficient conditions.</li> <li>Provide advance troubleshooting of the condition monitoring hardware and software packages such as 3500 racks, System1, ADRE 408 and AMS suite.</li> <li>Complete field tasks such as rotor trim balancing, instrument installation and hardware upgrades.</li> <li>Coordinate with all disciplines such as Controls, Instrumentation and Electrical and prepares technical and non-technical reports and presentations for communication at all levels of the company.</li> <li>Provide support to Analysts and Contractors to ensure best-in-class conditions monitoring services for their customers.</li> <li>Perform and give support to large multidiscipline projects related to condition monitoring systems.</li> <li>Provide mentorship and training within and outside the team, including NDP graduates and personnel with less experience.</li> <li>Communicate with third-party vendors and contractors, ensuring compliance of agreed terms and continuous improvement of expertise within the department.</li> <li>Ensure meeting KPI for the assigned area and report deviations to line manager on time.</li> </ul><br><ul> <li>Bachelor's degree in engineering.</li> <li>6 years' experience in an oil and gas environment.</li> <li>Fluent in English language (demonstrated verbal and written skills).</li> <li>Computer literate and knowledgeable in relevant software tools and specifications.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>Provide advanced diagnostics and troubleshooting at system, application, and infrastructure levels.</span><br></p><br><p><span>•</span><span> Perform root-cause analysis for major and recurring incidents and implement permanent corrective solutions.</span><br></p><br><p><span>•</span><span> Open, manage, and coordinate OEM back-to-back support cases while ensuring compliance with applicable ticketing and SLA timelines.</span><br></p><br><p><span>•</span><span> Manage system configuration, firmware, and software maintenance, including coordination of manufacturer releases and upgrades.</span><br></p><br><p><span>•</span><span> Maintain system design documents, SOPs, technical documentation, and knowledge-base information.</span><br></p><br><p><span>•</span><span> Provide technical assessment and recommendations to the Change Advisory Board for proposed system changes.</span><br></p><br><p><span>•</span><span> Maintain desktops, TOC video walls, processors, displays, and associated AV equipment.</span><br></p><br><p><span>•</span><span> Prioritize faults affecting the Terminal Operations Centre and perform AV calibration where required.</span><br></p><br><br><span>Requirements</span><p><span>Desktop support certification such as CompTIA, Microsoft, or equivalent.</span><br></p><br><p><span>•</span><span> ITIL Foundation certification and Barco, Extron, or equivalent AV/video-wall training.</span><br></p><br><p><span>•</span><span>*</span><b><b>Minimum 4 years</b></b><span>*</span><span> of hands-on experience supporting the relevant systems in a comparable environment.</span><br></p><br><p><span>•</span><span> Strong knowledge of desktop infrastructure, video-wall systems, processors, displays, firmware, and software maintenance.</span><br></p><br><p><span>•</span><span> Strong diagnostic, troubleshooting, and root-cause-analysis skills.</span><br></p><br><p><span>•</span><span> Experience coordinating with OEMs and managing technical escalations.</span><br></p><br><p><span>•</span><span> Good documentation, knowledge-transfer, and mentoring capability.</span><br></p><br><br> </div>

Key Responsibilities<br>Pre-Award Procurement<br>• Execute procurement strategies aligned with project objectives, budgets, and quality requirements.• Conduct supplier sourcing, market analysis, and supplier evaluations.• Lead commercial and contractual negotiations to secure the best value for projects.• Manage the procurement process from requisition through purchase order award.• Monitor supplier performance and identify cost-saving opportunities.• Support and mentor junior procurement professionals.<br>Post-Award Expediting<br>• Manage expediting activities from PO issuance to final delivery at site.• Track procurement and delivery schedules to ensure timely project execution.• Coordinate supplier kick-off meetings and monitor supplier deliverables.• Work closely with Engineering, Construction, Logistics, and Project teams.• Resolve vendor delays, logistics challenges, and material shortages.• Ensure compliance with contractual obligations and procurement standards.• Provide regular progress reports to project stakeholders and senior management.<br>Requirements8+ years of overall experience Minimum 5 years in EPC Oil & Gas procurement and expediting roles Strong experience in both pre-award and post-award activities SAP/ERP experience is mandatory Strong negotiation, supplier management, and commercial skills GCC experience is an advantage Bachelor's Degree in Supply Chain, Commerce, or related discipline CIPS or equivalent Supply Chain qualification is highly regarded

Job Purpose Responsible for monitoring and controlling project costs, budgets, commitments, actual expenditure, forecasts, and cost performance throughout the EPC project lifecycle. The role provides accurate cost information and early warning of potential cost overruns.<br>Key Responsibilities Monitor project budget, actual cost, commitments, accruals, and forecast against the approved cost baseline. Prepare weekly and monthly cost reports and cost variance analysis. Prepare and maintain ETC (Estimate to Complete) and EAC (Estimate at Completion). Monitor project cost performance using EVM, CPI, SPI, CV and SV. Coordinate with Planning to ensure cost and progress data are properly aligned. Maintain Cost Breakdown Structure (CBS) and cost coding. Monitor Purchase Orders, subcontracts, commitments, and invoices. Prepare and monitor monthly accruals and reconcile costs with Finance. Track variations, change orders, and their cost impact on the project. Monitor cost trends, risks, and potential budget overruns and provide early warnings. Support project cash-flow forecasting and management reporting. Coordinate with Engineering, Procurement, Construction, Contracts, Commercial, Planning, and Finance teams. Support project close-out and final cost reporting.<br>Requirements Bachelor’s degree in engineering, Quantity Surveying, Finance, Accounting, or related discipline.4–6 years of experience in Cost Control / Project Controls. EPC experience in Oil & Gas, Petrochemical, Power Plant, Industrial, Power, Digital & Infrastructure projects preferred. Good knowledge of EPC cost control, EVM, CPI/SPI, ETC/EAC, commitments, accruals, and forecasting. Strong MS Excel skills. Experience with Primavera P6, SAP, Oracle, Eco Sys, Power BI, or similar systems is an advantage. Good analytical, reporting, communication, and coordination skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Subject-matter expert and Level-3 support for the passenger-processing and biometric systems — common-use (CUTE) check-in and gates, self bag-drop and self-boarding, kiosks, flight-information displays and biometric Fast Pass. Owns the deep technical health of the system, resolves what<br><br>Level-2 cannot, and drives out root causes.<br><br>Key responsibilities<br><br></span><ul><li><span>Provide advanced diagnostics at system, application and infrastructure level for the system.<br></span></li><li><span>Carry out root-cause analysis for major and recurring incidents and own the permanent fix.<br></span></li><li><span>Open and manage OEM back-to-back support cases under the same ticket and SLA clock.<br></span></li><li><span>Own configuration, firmware and software maintenance and coordinate manufacturer releases and upgrades.<br></span></li><li><span>Own the preventive-maintenance procedures and predictive monitoring for the system.<br></span></li><li><span>Maintain the design documents, SOPs and knowledge base; mentor and sign off Level-2 competence.<br></span></li><li><span>Provide technical assessment to the Change Advisory Board for changes to the system.<br></span></li><li><span>Support peak-period device performance in close coordination with the TOC; manage hot-swap of readers, printers, scanners and gate components.<br></span></li></ul><br><span>RequirementsQualifications &amp; certifications <br><br></span><ul><li><span>Manufacturer training/certification on SITA / NEC / IDEMIA / Thales passenger-processing and biometric products; common-use (CUTE) experience.<br></span></li><li><span>ITIL Foundation.<br></span></li></ul>Experience: 5 or more years hands-on with the specific system in a comparable environment.<br><br>Competencies<br><br><ul><li><span>Deep product knowledge.<br></span></li><li><span>Diagnostic and root-cause skill.<br></span></li><li><span>OEM liaison.<br></span></li><li><span>Documentation and mentoring.<br></span></li></ul>Key performance indicators<br><br><ul><li><span>Advanced-incident resolution within SLA.<br></span></li><li><span>RCA delivered within timeline.<br></span></li><li><span>Repeat-incident reduction.<br></span></li><li><span>Certification currency.<br></span></li></ul>Working conditions &amp; compliance: Holds a valid MOI airport security pass. Compliance with MATAR HSE and cyber policies; use of the Enterprise Time &amp; Attendance System (ETAS); use of MATAR-authorised devices only.<br><br><br> </div>

Primary Purpose Of The Job<br><br>Responsible for environmental engineering and compliance activities associated with onshore greenfield and brownfield project scopes. Provides technical input across detailed engineering design, procurement, installation, construction, and commissioning of onshore facilities to ensure full adherence to applicable environmental standards and regulatory requirements, particularly for power generation & associated projects.<br><br>Required Experience And Skills<br><br>Minimum 10 years of relevant experience in environmental engineering within the power generation industry, either with a power generation company or as part of a consultant/contractor team, preferably on major greenfield projects. Experience managing and coordinating environmental interfaces with third parties and external authorities. Experience developing and endorsing environmental/HSE specifications and participating in HSE/Environmental studies such as HAZID, EIA, ENVID, HIRA, and dispersion/modelling studies. Strong knowledge of international environmental regulations, industry best practices, and company specifications/standards. Experience developing and reviewing Operational or Construction Environmental Management Plans (CEMP), Waste Management Plans (WMP), Oil Spill Prevention and Response Plans, and related environmental procedures. Familiarity with environmental impact assessment of process systems during drilling, construction, transportation, installation, commissioning, operation, and decommissioning. Experience assessing environmental risks related to decommissioning, abandonment, and demolition of existing facilities. Strong communication, presentation, and conflict management skills. Ability to manage multiple projects simultaneously while maintaining oversight of critical technical issues and risks. Ability to identify technical issues and escalate them appropriately to project management. Strong teamwork, collaboration, problem‑solving, and decision‑making capabilities. Ability to identify engineering risks and develop appropriate mitigation plans to ensure project success.<br><br>Educational Qualifications<br><br>B. Sc. in Environmental Engineering or Chemical Engineering from a recognized university. Membership in a recognized professional engineering or HSE association/institution is preferred.

Primary Purpose Of The Job<br><br>Deliver technical design and engineering services in Electrical Engineering for all assigned projects, leveraging deep expertise and hands-on experience with electrical systems in large-scale Combined Cycle Gas Turbine (CCGT) power plants. Ensure technical excellence and compliance with Qatar Energy standards, while maintaining quality, schedule, cost efficiency, and adherence to HSE requirements.<br><br>Required Experience And Skills<br><br>Expertise in electrical systems for CCGT power plants, including design, operation, and integration. Proven experience with high-voltage systems up to 400 k V and large-scale power plant projects. Collaboration with major OEMs (Siemens, GE, MHI) for gas and steam turbine integration. Skilled in specifying large transformers (>500 MVA) and generator circuit breakers (22–24 k V). Strong knowledge of auxiliary systems: DC/AC UPS, EDG, bus ducts, capacitor banks, lighting, earthing, cable routing, and small power. Comprehensive understanding of grid codes (KAHRAMAA preferred): power control, synchronization, stability, fault ride-through, island operation, and compliance testing. Familiarity with operational states, black start design, and RMS/EMT power system studies. Proficient in protection/control schemes, tariff metering, and SCADA systems. Knowledge of PPAs and technical implications. Expertise in lightning protection (IEEE 998, IEC 62305) and 400 k V overhead line/cable systems, including transient analysis (IEC 60071), cable bonding (IEEE 575), and reactor design. Experience with SAFOP, RAM analysis, ECM/EMI studies. Ability to lead design reviews and technical workshops independently.<br><br>Educational Qualifications<br><br>Bachelor’s or master’s degree in electrical engineering. Minimum 15 years of experience in large-scale power plant projects. Familiarity with KAHRAMAA grid code and international standards. Strong leadership and communication skills.

Primary Purpose Of The Job<br><br>Perform comprehensive Project Planning, Scheduling, Progress monitoring, Progress Verification and reporting activities necessary to achieve the successful execution of the assigned Project(s) from initiation to close-out.<br><br>Required Experience And Skills<br><br>Minimum 15 years’ experience in planning of projects in Oil & Gas including large capital and/or portfolio projects with onshore brownfield and greenfield projects including gas processing plants, refineries, onshore pipelines, etc. Preferably minimum 5 years’ experience in National Oil Companies and/or International Oil Companies. Experience in EPC project lifecycle, encompassing engineering, procurement, construction & commissioning Experience in pre-commissioning and commissioning planning, including system-wise handover strategies Experience in developing and managing shutdown schedules covering the full cycle: pre-shutdown preparation, shutdown execution and post-shutdown activities. Experience includes project planning, scheduling & phasing, project control & monitoring, forecasting, trending, risk assessment, variations/claims analysis, progress verification. High level of computer literacy with MS Office and relevant Project Control software including Primavera. Skills in Primavera Risk Analysis and Power BI are preferable. Work experience in the GCC is desirable Well-developed analytical and reporting skills.<br><br>Educational Qualifications<br><br>B. Sc. or equivalent in an Engineering Discipline. Preferably Certified PMP or equivalent certifications/memberships.

Primary Purpose Of The Job<br><br>Perform comprehensive Project Planning, Scheduling, Progress monitoring, Progress Verification and reporting activities necessary to achieve the successful execution of the assigned Project(s) from initiation to close-out.<br><br>Required Experience And Skills<br><br>Minimum 15 years’ experience in planning of projects in Oil & Gas including large capital and/or portfolio projects with onshore brownfield and greenfield projects including gas processing plants, refineries, onshore pipelines, etc. Preferably minimum 5 years’ experience in National Oil Companies and/or International Oil Companies. Experience in EPC project lifecycle, encompassing engineering, procurement, construction & commissioning Experience in pre-commissioning and commissioning planning, including system-wise handover strategies Experience in developing and managing shutdown schedules covering the full cycle: pre-shutdown preparation, shutdown execution and post-shutdown activities. Experience includes project planning, scheduling & phasing, project control & monitoring, forecasting, trending, risk assessment, variations/claims analysis, progress verification. High level of computer literacy with MS Office and relevant Project Control software including Primavera. Skills in Primavera Risk Analysis and Power BI are preferable. Work experience in the GCC is desirable Well-developed analytical and reporting skills.<br><br>Educational Qualifications<br><br>B. Sc. or equivalent in an Engineering Discipline. Preferably Certified PMP or equivalent certifications/memberships.

Primary Purpose Of The Job<br><br>Perform comprehensive Project Planning, Scheduling, Progress monitoring, Progress Verification and reporting activities necessary to achieve the successful execution of the assigned Project(s) from initiation to close-out.<br><br>Required Experience And Skills<br><br>Minimum 15 years’ experience in planning of projects in Oil & Gas including large capital and/or portfolio projects with onshore brownfield and greenfield projects including gas processing plants, refineries, onshore pipelines, etc. Preferably minimum 5 years’ experience in National Oil Companies and/or International Oil Companies. Experience in EPC project lifecycle, encompassing engineering, procurement, construction & commissioning Experience in pre-commissioning and commissioning planning, including system-wise handover strategies Experience in developing and managing shutdown schedules covering the full cycle: pre-shutdown preparation, shutdown execution and post-shutdown activities. Experience includes project planning, scheduling & phasing, project control & monitoring, forecasting, trending, risk assessment, variations/claims analysis, progress verification. High level of computer literacy with MS Office and relevant Project Control software including Primavera. Skills in Primavera Risk Analysis and Power BI are preferable. Work experience in the GCC is desirable Well-developed analytical and reporting skills.<br><br>Educational Qualifications<br><br>B. Sc. or equivalent in an Engineering Discipline. Preferably Certified PMP or equivalent certifications/memberships.

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Commis 1 Chef, you’re not just preparing great tasting food items – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Prepare high-quality dishes: Prepare menu items according to designated recipes and quality standards Delight our guests: Manage guest orders efficiently while ensuring a positive dining experience Execute complex recipes: Maintain a strong knowledge of menu offerings, handle complex recipes, and oversee stations, execution, quality control and inventory checks Inspect and finalize plates: Inspect all preparations and dishes ahead of serving to ensure they meet quality and presentation standards Maintain a clean and organized workspace: Keep food service stations stocked and sanitary while following proper food handling, storage, and safety protocols Manage inventory needs: Prepare requisitions for supplies and food items as needed Comply with regulatory standards: Maintain compliance with health, safety, sanitation, and alcohol awareness regulations, ensuring the highest standards of guest and team member well-being<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<p>To provide professional technical guidance, with full responsibility and accountability, to ensure that the Quality Management System is well implemented within the offshore EPIC Projects.</p><p>To ensure and monitor full compliance with Standards, Shell Dep's, and applicable International Codes throughout the projects performed, which shall be addressed in the relevant Project Quality Plans (PQP).</p><p>Prepare the Project QMS documentation in accordance with requirements.</p><p>Manage and follow-up on implementation of QMS compliance requirements in Contracts.</p><p>Act as a PMT Focal Point for Corporate/external audits. Coordinate with Project Team and EBS for planning and conducting second party audits on Contractors and participate in assigned audits during contracts execution.</p><p>Guide subordinates (call-off) and Project Team on various activities related to latest version of ISO 9001 Standard, QMS system documentation and certification requirements.</p><p>Prepare Project Quality Plan (PQP) in coordination with the Project Team.</p><p>Ensure that EPIC Contractors required Project Quality Plan (PQP) is established and adhered to throughout the Project Life Cycle.</p><p>Review the EPIC Scope of Services (SOS) and Scope of Work (SOW) and ensure that quality and technical requirements are incorporated which include Contractor/Supplier's QA/QC and relevant engineering and construction deliverables and any other Technical / System documents.</p><p>Participate in pre-qualification of EPIC Contractors/Sub-Contractors and Vendors, as required, monitor and enforce compliance with ISO 9001, QP-QAL-STD-004, PML/SML, etc.</p><p>Participate in EPIC technical bid evaluation of the Bidders to ensure that quality requirements as per QP-QAL-STD-004 are included, addressed, and understood.</p><p>Review Contractor/Supplier's engineering and construction deliverables with specific emphasis to QA/QC and coordinate with relevant engineering discipline specialists on issues related to materials/corrosion/special processes etc.; to enforce compliance to contract requirements.</p><p>Ensure deviation &amp; non-conformance control system is implemented to meet the departmental compliance requirements.</p><p>Verify the resolution of deviations related to corrective and preventive actions and proper closure of NCRs and CARs.</p><p>Lead multi-discipline QA/QC Team (call-off) within the Project Teams and ensure that the Inspection Test Plans and procedures are in place and adhered to throughout the project life cycle.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in an Engineering discipline from an internationally recognized University, preferably a Mechanical degree. Master's degree is also preferable.</li><li>Membership of a recognized Professional Institution of Relevance is preferable.</li><li>Minimum fifteen (15) years of relevant QA/QC experience in Oil &amp; Gas projects, including solid offshore experience, minimum 5 years in similar senior positions.</li><li>Qualified as Lead ISO 9001 Auditor. Professional qualifications relevant to quality are desirable. Working knowledge and experience with international codes and standards relevant to quality.</li><li>Familiar with development of quality management systems, quality assurance &amp; control relevant to Oil and Gas or Infrastructure and Civil projects during engineering development, procurement, construction &amp; commissioning.</li><li>Working knowledge in the manufacturing inspection and certification processes for equipment/ materials in projects and the associated Quality Assurance and Quality Control practices.</li><li>Working knowledge in offshore construction, welding &amp; NDE (conventional and nonconventional techniques) is essential.</li><li>Proficient in the English language (both written &amp; spoken).</li><li>Leadership skills to motivate and organize Project and Contractors quality &amp; Inspection Teams to achieve a high-performance level.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview:</p><p>The primary functions of an AFE is to manage the spares movement inbound and outbound the warehouse, resolution of minor incidents that are raised by our customers and assisting on parts deliveries to Field Engineers &amp; Service Partner Engineers onsite. Incidents and changes can be related to Servers, tape libraries/drives, storage devices, printers, and various other pieces of equipment.</p><p>Primary Workflow:</p><ul><li>Spares management inbound and outbound the warehouse</li><li>Handle quarterly stock take in Local Warehouse &amp; Service Partner Warehouses</li><li>Onsite minor break-fix hardware maintenance (Hot swap hard disk replacement, cable reseat, etc)</li><li>Conduct onsite physical &amp; logical audits for proactive sparing.</li><li>Perform quarterly onsite preventive maintenance per assigned customer.</li><li>Handle spare parts deliveries to FE, SeP &amp; client.</li><li>Issuance of IMR’s, POR’s</li><li>Assist VCA’s &amp; BDA’s for investigating missing parts from stock counting.</li><li>Customer communication</li><li>Updating TRT internal procedures</li><li>Learning additional technical and non-technical skills.</li><li>Sourcing Local Service Partners</li><li>Sourcing Local Logistic Partner / Supplier</li></ul><p><br></p><p>Required Deliverables:</p><ul><li>Ensure above 95% accuracy between NetSuite inventory database and actual TRT &amp; SeP warehouse spares.</li><li>Ensure all supported incidents or tickets are resolved within SLAs.</li><li>Ensure all customer communication is prompt, professional and reliable.</li><li>Ensure all commitments made to customers are met or re-scheduled with the customer’s knowledge and approval.</li><li>Continuously learn additional technical and non-technical skills</li><li>Escalate calls through the correct channels promptly.</li><li>24 x 7 Support Structure</li><li>Comply fully with company policy to always protect the interests of TRT.</li><li>Ensure local SeP is available for onsite requirements.</li><li>Working with VCA team for local parts sourcing</li></ul><p>Accountabilities:</p><ul><li>Local ticket management/status monitoring and make sure they are resolved within SLAs.</li><li>Warehouse inventory movement monitoring</li><li>Ensure warehouse parts labelling &amp; binning is compliant with TRT global standard</li><li>Ensure procedures are properly followed when onsite</li><li>Ensure on time support for spare parts</li></ul><p>Disaster Recovery:</p><ul><li>Coordination within FE / SeP team for urgent part requirement onsite</li><li>Handle coordination &amp; keep good working relationships with logistics and service partners.</li><li>Coordination with known local vendors for urgent logistics sparing.</li><li>Coordination with VCA, BDA &amp; GSD division for parts needed for a call.</li><li>Coordination with VCA, BDA &amp; GSD division for inventory movement</li><li>Appropriate escalation to Shift leader or Field Services Team Leader when necessary.</li></ul><p><br></p><p>Service Call Updates:</p><ul><li>Ensure timely updating to GSD &amp; FE for calls requiring additional parts on-site.</li><li>Ensure that all onsite service calls under your responsibility are updated to the GSD Team within the agreed Service Level of the client contract.</li></ul><p>OH&amp;S Work Environment:</p><ul><li>Ensure that the warehouse or technical work areas remain clean and always organized.</li><li>Ensure that you adhere to ESD procedures.</li><li>Ensure that you adhere to all OHS requirements, including for lifting, cabling, rack mounting, and equipment in rooms that do not obstruct walkways.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements:</p><ul><li>Candidates must possess a college degree. Training and Certification would be an advantage.</li></ul><p>· Certification on Various Networking platforms</p><p>· Strong understanding of Networking fundamentals</p><p>· Cisco and Juniper Certification preferred.</p><p>· Solaris – Oracle Certified Professional</p><p>· VMWare – VMWare Certified Professional</p><p>· TSM - IBM Certified Deployment Professional</p><p><br></p><ul><li>Preferably have 7 years up of experience in IT spare parts control &amp; warehouse maintenance</li></ul><p>Willing to be assigned in TRT office location, and to travel to TRT offices globally on as needed basis.</p></div>

Overview<br>Our company is TURALI GROUP below products manufacturer and exporter. Turalı Group has 14 different companies in 7 sectors, we have production factories in Turkey, Germany, China, Taiwan. We are working with many biggest manufacturer and OEM companies all over the World. We want to be your suppliers too.<br>Hydraulic & Pneumatic Equipments Metal & Steel Product, Raw Material, Metal Fabrication Special Manufacturing (Machining Welded, Cutting-Bending,Casting, Engineering Plastic Parts Manufacturing ) Mechanical Insulation Products ( Industrial Fittings, Flange, Elbow, Spool etc. )<br>General Catalog : TURALI GROUPTurfab --- Heavy industry and technologies -------- www.turfab.comRastahl --- Steel pipe production and metal service ----- www.rastahl.comHydrointer ---- Production of hydraulic and industrial equipment ----- www.hydrointer.comTurmac Machinery ---- Standard and special production machinery -- www.turmacmachinery.com Ramsa Defense & Aviation ---- Defense industry and aviation ---- www.ramsadefence.comTurva Fit --- Mechanical equipment and fittings production ----- www.turvafit.comRamsasoft ---- Software and software systems ---- www.ramsasoft.comTurali group --- Our holding company ---- www.turaligroup.com<br>Responsibilities<br>Develop sales network in Qatar Preparing report weekly Develop distribitor activity<br>Qualifications<br>Having worked in Turalı group sectors or having similar experiences Proficient in Microsoft office programs and able to report Fluently English speaking Having the ability to represent the company in the Qatar<br>Salary<br>This position not have monthly salary The total profit will be paid as 3-5% on the sales invoice. If total amount will be avalaible for sales target , Turalı will open office and set other sales arquments<br>info@turaligroup.comMs. Asena Erksan

Overview<br>Our company is TURALI GROUP below products manufacturer and exporter. Turalı Group has 14 different companies in 7 sectors, we have production factories in Turkey, Germany, China, Taiwan. We are working with many biggest manufacturer and OEM companies all over the World. We want to be your suppliers too.<br>Hydraulic & Pneumatic Equipments Metal & Steel Product, Raw Material, Metal Fabrication Special Manufacturing (Machining Welded, Cutting-Bending,Casting, Engineering Plastic Parts Manufacturing ) Mechanical Insulation Products ( Industrial Fittings, Flange, Elbow, Spool etc. )<br>General Catalog : TURALI GROUPTurfab --- Heavy industry and technologies -------- www.turfab.comRastahl --- Steel pipe production and metal service ----- www.rastahl.comHydrointer ---- Production of hydraulic and industrial equipment ----- www.hydrointer.comTurmac Machinery ---- Standard and special production machinery -- www.turmacmachinery.com Ramsa Defense & Aviation ---- Defense industry and aviation ---- www.ramsadefence.comTurva Fit --- Mechanical equipment and fittings production ----- www.turvafit.comRamsasoft ---- Software and software systems ---- www.ramsasoft.comTurali group --- Our holding company ---- www.turaligroup.com<br>Responsibilities<br>Develop sales network in Qatar Preparing report weekly Develop distribitor activity<br>Qualifications<br>Having worked in Turalı group sectors or having similar experiences Proficient in Microsoft office programs and able to report Fluently English speaking Having the ability to represent the company in the Qatar<br>Salary<br>This position not have monthly salary The total profit will be paid as 3-5% on the sales invoice. If total amount will be avalaible for sales target , Turalı will open office and set other sales arquments<br>info@turaligroup.comMs. Asena Erksan