Swift Jobs in Qatar

<p>The RMC Supervisor is responsible for leading and managing the Roads Management Centre (RMC) operations during assigned shifts, ensuring the safe, efficient, and contract-compliant operation of Qatar's road network on a 24/7 basis. The role provides operational leadership to the control room team, oversees incident and tunnel management, authorizes operational response plans, and serves as the primary escalation point during emergencies, major incidents, severe weather, and planned events. The RMC Supervisor is accountable for shift performance, operational compliance, stakeholder coordination, service level achievement, and adherence to Ashghal requirements, approved Standard Operating Procedures (SOPs), and Egis-QBC JV policies.</p><p><b>Key Responsibilities</b></p><ul><li>Lead and supervise all Roads Management Centre (RMC) operations during the assigned shift, ensuring continuous, safe, and efficient traffic, ITS, and tunnel operations across the Qatar road network.</li><li>Provide direct supervision and guidance to RMC Team Leaders and Operators, ensuring appropriate staffing levels, workload allocation, and effective control room operations.</li><li>Act as the senior operational authority during incidents, emergencies, tunnel events, severe weather, major planned events, and critical system failures, escalating matters in accordance with the approved escalation matrix.</li><li>Authorize and oversee the implementation, monitoring, and withdrawal of approved traffic management response plans, including incident response, traffic diversions, lane closures, speed management, Dynamic Message Signs (DMS), Lane Control Signals (LCS), and tunnel operational procedures.</li><li>Maintain comprehensive situational awareness of the road network through CCTV, OMNIA/ATMS, SCATS, Tunnel Management Systems, DMS/LCS, and other operational platforms to ensure timely operational decisions.</li><li>Monitor operational performance against contractual Service Level Agreements (SLAs) and Key Performance Indicators (KPIs), including response times, clearance times, notification requirements, and journey time reliability, implementing corrective actions where required.</li><li>Ensure the accuracy, completeness, and quality of operational records, incident logs, reports, notifications, and shift documentation, maintaining audit-ready evidence for client review.</li><li>Identify, record, and manage operational Quality Failures, service credits, and contractual non-compliance risks, ensuring appropriate mitigation measures and timely reporting.</li><li>Coordinate effectively with Ashghal, Ministry of Interior (MOI) Traffic Police, Civil Defence, Ambulance Services, DNMC, Call Centre, maintenance teams, technical support providers, and other stakeholders during operational activities and emergency responses.</li><li>Oversee the management and escalation of system faults and alarms, ensuring timely referral to the Service Desk, Network Operations Centre (NOC), or relevant technical support teams, while monitoring system availability and operational impacts.</li><li>Support the management of planned roadworks, Traffic Diversion Plans (TDPs), and Road Occupancy Permits processed through QPRO, ensuring operational compliance with approved traffic management arrangements.</li><li>Ensure effective shift handovers through comprehensive operational briefings, documentation, and reporting to maintain continuity of operations.</li><li>Monitor compliance with approved Standard Operating Procedures (SOPs), operational policies, emergency response procedures, and control room protocols, recommending process improvements where necessary.</li><li>Support workforce planning by monitoring shift coverage, attendance, leave management, and resource availability to ensure uninterrupted 24/7 operations.</li><li>Coach, mentor, and assess the performance and competency of Team Leaders and Operators through on-the-job training, performance feedback, scenario exercises, and continuous development activities.</li><li>Ensure compliance with confidentiality, information security, and data protection requirements related to operational information, CCTV footage, reports, and stakeholder communications.</li><li>Support business continuity planning, emergency preparedness exercises, contingency operations, and post-incident reviews to enhance operational resilience.</li><li>Analyse operational trends, recurring incidents, system performance, and stakeholder feedback, providing recommendations to improve operational efficiency, safety, and service delivery.</li><li>Ensure full compliance with the State of Qatar's applicable legislation, Labour Law, Framework Contract requirements, and the latest editions of ISO 9001, ISO 45001, ISO 14001, as well as Egis-QBC JV Quality, Health, Safety, and Environmental Management Systems.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree or Diploma in Engineering, Information Technology, Business Administration, or a related discipline.</li><li>Minimum 5 8 years of relevant experience in IBM Maximo operations, Enterprise Asset Management (EAM), asset management, or maintenance coordination.</li><li>Previous experience within road maintenance, highways operations, or a Roads Management Centre (RMC) environment is preferred.</li><li>Proven experience in workflow optimization, business process improvement, and the implementation of best practices using Enterprise Asset Management (EAM) systems.</li><li>Experience in delivering user training, system administration, and end-user support for IBM Maximo or similar EAM platforms is highly desirable.</li><li>Advanced working knowledge of IBM Maximo , including work order management, asset management, preventive maintenance, and reporting functions.</li><li>Proficient in Microsoft Office applications, particularly Excel, Word, and Outlook ; familiarity with Electronic Document Management Systems (EDMS) or document control systems is an advantage.</li><li>Excellent organizational and time management skills, with the ability to manage multiple priorities in a fast-paced operational environment.</li><li>Strong analytical and problem-solving skills with a high level of attention to detail and accuracy.</li><li>Effective communication and stakeholder coordination skills, with the ability to work collaboratively across multidisciplinary teams.</li><li>Ability to work under pressure, manage competing priorities, and consistently meet operational deadlines.</li></ul>

Other Full-Time On-Site 2 Openings<br><br>Lift Foreman<br><br>Doha<br><br> Posted 16 hours ago<br><br>Login to Apply Save<br><br>Salary Range<br><br>QAR3,000 - QAR5,000 / month<br><br>Experience<br><br>2 years<br><br>Education<br><br>Diploma<br><br>Work Mode<br><br>On-Site<br><br>Role Overview & Description<br><br>Lead elevator installation and maintenance crews while ensuring quality and safety compliance.<br><br>Key Requirements & Responsibilities<br><br>Supervise lift technicians. Coordinate installations. Monitor maintenance works. Ensure safety compliance. Report progress.<br><br>Required Skills & Expertise<br><br>Elevator Systems Team Leadership Troubleshooting Reporting Planning<br><br>Education & Study Field<br><br>Diploma<br><br>Experience Required<br><br>2 years<br><br>Languages Required<br><br>English Arabic<br><br>Perks & Benefits<br><br> Visa Accommodation Transportation<br><br>Apply for this Position<br><br>Login as a jobseeker to apply.<br><br>Login to Apply Register Account<br><br>Job Snapshot<br><br> Job Code #JOB-3898 Category Other Employment Full-Time Work Mode On-Site Shift Type Day Shift Deadline Nov 09, 2026 Country Qatar State / Province Doha<br><br>Save Job<br><br>Similar Openings<br><br>Mechanical QA/QC Engineer<br><br>₹35,000 - 65,000<br><br>Mechanical QA/QC Engineer<br><br>₹30,000 - 55,000<br><br>Mechanical QA/QC Engineer<br><br>₹40,000 - 75,000

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p><strong>"Why work for Accor?</strong><br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS"</p><br><p><strong>"Why work for Banyan Tree Doha?</strong><br>Be a part of the mosaic team, located in the heart of Mushaireb, Banyan Tree Doha offers an urban retreat that blends unparalleled luxury with modern comfort and architectural marvels. Our property offers a unique blend of Eastern and Western hospitality in an atmosphere of timeless elegance that goes beyond comfortable and stylish rooms, with unmatched sea and city views.</p><br><br>Job Description<br><br><p>What you will be doing<strong>:</strong></p><br><ul><li>Be responsible for all cleaning of guest rooms.</li><li>Ensure that to have enough quantity of guest amenities on your trolley.</li><li>Ensure the work quality up to standard.</li><li>Handle all service matters to guests.</li><li>Strictly follow Lost and Found procedure.</li><li>Be aware of the daily hotel activities and has product knowledge of all the hotel facilities.</li><li>Proper grooming at all times.</li><li>Proper stock of guest amenities, cleaning supplies, clean linen are arranged well on the trolley before starting the work.</li><li>Check and make note of all the room with” Do Not Disturb” sign before the end of the shift.</li><li>Personally supervise the end of day closing of the service area and makes sure that all equipment are in appropriate place and nothing is left around which can be hazardous.</li><li>At the end of the shift or the day, she/he has to communicate all information that the next shift or the supervisor has to know for a well running of the operations.</li></ul><br>Qualifications<br><br><p>Your experience and skills include:</p><br><ul><li>Previous experience in Hotel Housekeeping department desirable</li><li>Previous experience in 5 star property desirable</li><li>Must be proactive with a meticulous eye for detail</li><li>Dynamic, energetic, creative and thrives under pressure</li></ul><br>Additional Information<br><br> </div>

Operational Management<br><br> Assist the Assistant Restaurant Manager in training and supervising front-of-house staff. Oversee daily floor operations and ensure all company standards are consistently met. Ensure completion of all opening and closing procedures, checklists, and requisitions for each shift. Conduct and lead pre-shift briefings and ensure staff attendance at departmental meetings. Communicate effectively with staff regarding menu updates, reservations, special guest requirements, and operational issues. Ensure all service steps, policies, and procedures are followed in line with company guidelines. Monitor restaurant and kitchen operations to ensure food quality and service standards are maintained. Utilize the Point of Sale (POS) system efficiently. Follow and enforce proper cash handling procedures.<br><br>Customer Service<br><br> Interact with guests in a professional and friendly manner to ensure high levels of satisfaction. Handle guest concerns and complaints promptly and effectively. Maintain a visible presence on the floor to monitor service quality and provide guidance where needed.<br><br>Leadership & Team Supervision<br><br> Observe staff performance and provide constructive feedback for continuous improvement. Encourage teamwork, accountability, and a positive work environment. Ensure staff are well-organized, prepared, and aligned with operational requirements. Lead by example and act as a role model for service excellence.<br><br>HR & Training<br><br> Support continuous training and development of team members. Identify talent and assist in staff development initiatives. Participate in recruitment processes and coordinate with HR when required. Ensure timely completion of probation reviews, appraisals, and documentation. Promote a culture of respect, engagement, and teamwork.<br><br>Health & Safety<br><br> Ensure compliance with local health, hygiene, and safety regulations. Maintain a clean, safe, and organized working environment at all times.<br><br>Marketing & Brand Representation<br><br> Maintain knowledge of current promotions, offers, and packages. Act as a brand ambassador, ensuring all interactions reflect company values and standards.<br><br>Communication<br><br> Demonstrate strong verbal and written communication skills. Prepare and communicate reports when required. Ensure clear and consistent communication between front-of-house and kitchen teams.

Operational Management<br><br> Assist the Assistant Restaurant Manager in training and supervising front-of-house staff. Oversee daily floor operations and ensure all company standards are consistently met. Ensure completion of all opening and closing procedures, checklists, and requisitions for each shift. Conduct and lead pre-shift briefings and ensure staff attendance at departmental meetings. Communicate effectively with staff regarding menu updates, reservations, special guest requirements, and operational issues. Ensure all service steps, policies, and procedures are followed in line with company guidelines. Monitor restaurant and kitchen operations to ensure food quality and service standards are maintained. Utilize the Point of Sale (POS) system efficiently. Follow and enforce proper cash handling procedures.<br><br>Customer Service<br><br> Interact with guests in a professional and friendly manner to ensure high levels of satisfaction. Handle guest concerns and complaints promptly and effectively. Maintain a visible presence on the floor to monitor service quality and provide guidance where needed.<br><br>Leadership & Team Supervision<br><br> Observe staff performance and provide constructive feedback for continuous improvement. Encourage teamwork, accountability, and a positive work environment. Ensure staff are well-organized, prepared, and aligned with operational requirements. Lead by example and act as a role model for service excellence.<br><br>HR & Training<br><br> Support continuous training and development of team members. Identify talent and assist in staff development initiatives. Participate in recruitment processes and coordinate with HR when required. Ensure timely completion of probation reviews, appraisals, and documentation. Promote a culture of respect, engagement, and teamwork.<br><br>Health & Safety<br><br> Ensure compliance with local health, hygiene, and safety regulations. Maintain a clean, safe, and organized working environment at all times.<br><br>Marketing & Brand Representation<br><br> Maintain knowledge of current promotions, offers, and packages. Act as a brand ambassador, ensuring all interactions reflect company values and standards.<br><br>Communication<br><br> Demonstrate strong verbal and written communication skills. Prepare and communicate reports when required. Ensure clear and consistent communication between front-of-house and kitchen teams.

Job description:<br><br>JOB PURPOSE:To ensure the smooth and continuous operation of the gas and steam turbines, HRSGs, potline rectifiers, associated plant equipment and all related utility services in his designated area of responsibility, in a safe and efficient manner as instructed by the Shift Supervisor or the Main Control Room Operator. KEY ACCOUNTABILITIES:Ensure that all plant and equipment under his control are operated in a safe and efficient manner. Ensure that all instructions are carried out promptly and efficiently. Record routine parameter readings on regular basis and report deviations. Inform the Supervisor (or) control room of any abnormalities/problems on equipment Ensure standby equipment is readily available for service in an emergency. Assist in carrying out routine testing/re-commissioning of plant after maintenance outages. Adopt safe working practices to ensure personal and plant safety. Identify hazards and participate effectively in reporting system. Maintain good standards of housekeeping. Must be fully conversant with all emergency procedures related to the equipment in his designated area of responsibility Carry out on the job training Strive to achieve increased competency Jebel Ali Site, additional roles Operator Turbine & Boiler Assistant Operator At Jebel Ali Site, for the roles of Operator Turbine & Boiler and Assistant Operator, the above accountabilities will be restricted to Gas Turbines, Steam Turbines, associated plant equipment and related utilities. QUALIFICATIONS & SKILLS:Minimum Qualifications:Higher Secondary School Certificate. Minimum Experience:4 years in a power station.2 years’ work experience as Desalination Operator (PG7) or equivalent experience gained working in a similar industry. Skills:Achieved competencies in all areas except DCR operation. English language skills (to prepare and complete shift reports. Intermediate 3 or equivalent level). Communication Skills. Basic numeracy (e.g. concentration, percentage, unit conversion, rate calculations etc.). Ability to understand single line diagram. IT skills. Problem solving skills. Planning and organising skills. Communication skills. Interpersonal skills Teamwork skills.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide massage services to guests using props and/or products. Provide body treatments to guests using body scrubs, wraps, and/or hydrotherapy. Assess guest needs and inquire about contraindications (e.g., allergies, high blood pressure, and pregnancy) before beginning service. Keep up to date with current techniques and modalities related to their field of work. Escort guests to and from treatment rooms. Arrange workstation, treatment room, and/or drapes. Frequently check with guest to promote comfort, safety and security throughout service. Promote and sell spa/salon services including retail offerings related to the Spa. Clean, maintain, and sterilize tools. Maintain cleanliness of workstation and/or treatment room throughout shift, dispose of trash and dirty linens, and secure supplies and equipment at the end of each shift. Monitor and stick to time schedule throughout the day. Handle inappropriate guest behavior by following hotel standard operating procedures for Inappropriate conduct for guests and therapists, leading up to and including stopping a treatment or service and informing supervisor/manager. Maintain current skills and licensure in service area as per regional requirements.</p></div></section>

Transport & Ramp Operations Team Leader – Aviation Catering Logistics ???? Doha, Qatar<br><br> ???? Qatar Airways ✈️ Aviation & Airport Operations Full-time On-site<br><br>The Context Qatar Airways, the award-winning national carrier of Qatar, is seeking a Transport Team Leader to manage ground transport, catering delivery, and ramp dispatch operations at Hamad International Airport. Operating in a high-density hub environment, the role ensures strict adherence to on-time performance (OTP), airside safety standards, and flawless flight loading across passenger, charter, and VIP aircraft.<br><br>What The Role Covers<br><br>Airside Fleet Dispatch & Catering Delivery You lead the real-time dispatch and execution of catering transport fleets across all aircraft turnarounds, including complex ultra-long-haul and VIP flights. You ensure all loading, offloading, and hi-loader vehicle positioning strictly align with airline specifications, food safety regulations, and airport ramp safety protocols.<br><br>Operations Management & Root Cause Incident Analysis You conduct thorough Voyage Report (VR) investigations for operational delays or discrepancies within the transport department, identifying root causes and defining corrective actions. You track On-Time Performance (OTP) data, oversee vehicle maintenance logs, and ensure airside safety and PPE compliance across all operational teams.<br><br>Resource Rostering & Team Leadership You oversee shift scheduling, overtime allocation, and vacation planning for catering drivers and equipment operators under the guidance of Duty Supervisors. You evaluate team performance, manage equipment allocation (tablets, radios, temperature probes), and identify targeted training needs for new and existing operational staff.<br><br>Candidate Profile<br><br>High School Diploma with 2+ years of relevant experience, or a Bachelor's Degree with 1+ years of experience in airport ground or catering transport operations Valid Heavy Goods Vehicle (HGV) driving license Hands-on knowledge of aircraft loading procedures, hi-loader catering vehicles, and ground fleet management Experience in airside operations, shift rostering, and leading driver or equipment operator teams Fluent in professional spoken and written English, with high attention to detail and ability to work under pressure in shift environments<br><br>Why This Role Stands Out - Supply Tech Nexus Take Managing airside logistics and fleet dispatch at Hamad International Airport offers unmatched operational exposure within one of the world's premier aviation hubs. Ground handling and airline catering logistics demand minute-by-minute accuracy, making high-performing shift leaders vital to maintaining global flight schedules.<br><br>As Qatar Airways continues to expand its global flight network, operational team leaders with direct airside HGV experience, ramp safety mastery, and shift rostering capabilities remain crucial assets. This role provides an ideal step-up for ground logistics professionals seeking supervisory experience within a world-class airline environment.<br><br>Salary Benchmark - Qatar Market (2024/2025) For a Transport Team Leader / Coordinator With 2–4 Years Of Experience, Based In Doha<br><br>Base salary: QAR 12,000 - 18,000/month<br><br>Curated and published by Supply Tech Nexus - the job platform dedicated to supply chain and logistics professionals across the MENA & GCC region.<br><br>Victor L. | Supply Tech Nexus | Logistics<br><br> WMS SAP GCC Region

F&B Supervisor – 5-Star Resort | Sealine, Qatar<br>We are looking for an experienced and service-oriented F&B Supervisor to join a prestigious 5-star resort in the Sealine area of Qatar.<br>The F&B Supervisor will be responsible for supervising day-to-day food and beverage operations, ensuring exceptional guest experiences, maintaining luxury service standards, and leading the F&B team during assigned shifts. The role will work closely with the F&B Manager, Restaurant Manager, Kitchen and other resort departments to ensure smooth and efficient operations. The ideal candidate should have proven experience in a luxury hotel, 5-star resort, fine-dining restaurant, beach resort or high-end hospitality environment, with strong knowledge of international F&B service standards.<br>Key Responsibilities F&B Operations Supervise daily operations of assigned restaurants, cafés, lounges, pool/beach outlets, banquets and other F&B facilities. Ensure smooth and efficient service throughout each shift. Conduct pre-shift briefings and allocate duties according to operational requirements. Ensure proper opening, operating and closing procedures are followed. Monitor table setup, mise-en-place, service sequence, cleanliness and overall outlet readiness. Ensure effective shift handovers and clear communication between teams. Guest Experience & Luxury Service Deliver and maintain 5-star luxury service standards throughout all guest interactions. Proactively identify guest requirements and ensure personalized service. Handle guest feedback, complaints and service recovery professionally and promptly. Ensure the team demonstrates excellent product knowledge and knowledge of menus, promotions and resort facilities. Maintain a welcoming, professional and guest-focused environment. Team Leadership Supervise, motivate and guide F&B service colleagues during shifts. Allocate daily responsibilities and monitor staff performance. Coach team members on service standards, grooming, etiquette and product knowledge. Support the training and onboarding of new F&B employees. Monitor attendance, punctuality, grooming and professional conduct. Lead by example and promote teamwork across a multicultural workforce. Food Safety, Hygiene & Compliance Ensure compliance with food safety, hygiene, health and safety and resort SOPs. Conduct regular checks of dining areas, service stations, storage areas and equipment. Ensure appropriate personal hygiene and grooming standards are maintained. Monitor cleanliness and sanitation of all F&B areas. Report maintenance, safety or operational issues to the relevant department immediately. Stock & Cost Control Monitor operating supplies, crockery, cutlery, glassware, linen and other F&B requirements. Assist with stocktaking, requisitions and inventory control. Ensure correct stock rotation and minimize wastage and spoilage. Monitor appropriate use of consumables and equipment. Support the F&B Manager in maintaining operational costs within budget. Revenue & Business Support Promote upselling and suggestive selling opportunities. Ensure staff are aware of promotions, special packages and revenue-generating initiatives. Support management in achieving F&B revenue and guest satisfaction targets. Assist with special events, private functions, weddings, banquets and resort activities as required. Interdepartmental Coordination Coordinate closely with the Kitchen to ensure timely food preparation and service. Work with Housekeeping, Engineering, Front Office, Events and other departments to ensure seamless guest experiences. Communicate operational issues and guest feedback to management. Ensure all relevant reports, checklists and closing procedures are completed accurately. Requirements Diploma or Bachelor's Degree in Hotel Management, Hospitality Management, Food & Beverage Management or a related field preferred. Minimum 3–5 years of F&B experience, including at least 1–2 years in a supervisory position within a 5-star hotel, luxury resort, fine-dining restaurant or premium hospitality environment. Resort, beach club, outdoor dining or high-volume F&B experience will be an advantage. Strong knowledge of international food and beverage service standards. Experience with fine dining, buffet, à la carte, banquets and/or resort F&B operations. Good knowledge of POS systems and basic Microsoft Office applications. Food safety/hygiene certification is preferred. Excellent English communication skills; additional languages are an advantage. Strong leadership, interpersonal and problem-solving skills. Professional appearance, grooming and positive attitude. Ability to work shifts, weekends, public holidays and extended hours based on resort operations. Key Competencies Luxury Guest Service F&B Operations Team Leadership Staff Training & Coaching Fine Dining Service Guest Complaint Resolution Upselling & Revenue Generation Inventory & Cost Control Food Safety & Hygiene POS & Cash Handling Communication & Coordination Problem Solving Attention to Detail Multicultural Team Management Professional Grooming & Presentation

<p>Principal: Qatar District Cooling Company</p><p><strong>Safety Observation</strong></p><p>Raise SO in CMMS when found during shift.</p><p><strong>Security Rounds:</strong></p><p>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p><strong>Safety Check:</strong></p><p>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>Ensure all safety signage is visible and up-to-date.</p><p><strong>Emergency Response</strong></p><p>Respond to emergencies, such as equipment failures, fires, or spills.</p><p><strong>PTW System</strong></p><p>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p><strong>Equipment Line Up / LOTO</strong></p><p>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p><strong>Equipment Inspection:</strong></p><p>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>Check lubrication levels and perform routine lubrication as needed.</p><p><strong>Parameter Monitoring:</strong></p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p><strong>System Startup:</strong></p><p>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p><strong>System Shutdown:</strong></p><p>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p><strong>Alarm &amp; Event (A&amp;E) Analysis</strong></p><p>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p><strong>Shift Handover:</strong></p><p>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p><strong>Plant Optimization</strong></p><p>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p><strong>Troubleshooting and Maintenance:</strong></p><p>Respond to any alarms or alerts and take necessary corrective actions.</p><p>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p><strong>Defect Management</strong></p><p>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p><strong>Monitoring of Chemical Treatment Systems</strong></p><p>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p><strong>Others and Extras</strong></p><p>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</p><p>Occasionally attend site visits by visitors or contractors.</p><p>Perform any other duty as assigned by the Plant Operations Supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Additional Qualifications:</strong></p><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Additional Qualifications:</strong></p><p><strong>Safety Observation</strong></p><p>Raise SO in CMMS when found during shift.</p><p><strong>Security Rounds:</strong></p><p>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p><strong>Safety Check:</strong></p><p>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>Ensure all safety signage is visible and up-to-date.</p><p><strong>Emergency Response</strong></p><p>Respond to emergencies, such as equipment failures, fires, or spills.</p><p><strong>PTW System</strong></p><p>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p><strong>Equipment Line Up / LOTO</strong></p><p>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p><strong>Equipment Inspection:</strong></p><p>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>Check lubrication levels and perform routine lubrication as needed.</p><p><strong>Parameter Monitoring:</strong></p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p><strong>System Startup:</strong></p><p>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p><strong>System Shutdown:</strong></p><p>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p><strong>Alarm &amp; Event (A&amp;E) Analysis</strong></p><p>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p><strong>Shift Handover:</strong></p><p>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p><strong>Plant Optimization</strong></p><p>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p><strong>Troubleshooting and Maintenance:</strong></p><p>Respond to any alarms or alerts and take necessary corrective actions.</p><p>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p><strong>Defect Management</strong></p><p>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p><strong>Monitoring of Chemical Treatment Systems</strong></p><p>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p><strong>Others and Extras</strong></p><p>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</p><p>Occasionally attend site visits by visitors or contractors.</p><p>Perform any other duty as assigned by the Plant Operations Supervisor</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><h2 style="font-size: 11px;">Qualifications:</h2><p style="font-size: 11px;">Candidates must have at least Vocational Diploma / Short Course Certificate</p><h2 style="font-size: 11px;">Additional Qualifications:</h2><ul style="font-size: 11px;"><li style="font-size: 11px;"><strong style="font-size: 11px;">Safety Observation</strong><br>Raise SO in CMMS when found during shift.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Security Rounds:</strong><br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Safety Check:</strong><br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Emergency Response</strong><br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">PTW System</strong><br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Equipment Line Up / LOTO</strong><br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Equipment Inspection:</strong><br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Parameter Monitoring:</strong><br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li style="font-size: 11px;"><strong style="font-size: 11px;">System Startup:</strong><br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">System Shutdown:</strong><br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Alarm &amp; Event (A&amp;E) Analysis</strong><br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Shift Handover:</strong><br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Plant Optimization</strong><br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Troubleshooting and Maintenance:</strong><br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Defect Management</strong><br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Monitoring of Chemical Treatment Systems</strong><br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li style="font-size: 11px;"><strong style="font-size: 11px;">Others and Extras</strong><br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><br></h2><ul> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Safety Observation</strong><br>Raise SO in CMMS when found during shift.</p><p><strong>Security Rounds:</strong><br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p><strong>Safety Check:</strong><br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p><strong>Emergency Response</strong><br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p><strong>PTW System</strong><br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p><strong>Equipment Line Up / LOTO</strong><br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p><strong>Equipment Inspection:</strong><br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p><strong>Parameter Monitoring:</strong><br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p><strong>System Startup:</strong><br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p><strong>System Shutdown:</strong><br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p><strong>Alarm &amp; Event (A&amp;E) Analysis</strong><br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p><strong>Shift Handover:</strong><br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p><strong>Plant Optimization</strong><br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p><strong>Troubleshooting and Maintenance:</strong><br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p><strong>Defect Management</strong><br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p><strong>Monitoring of Chemical Treatment Systems</strong><br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p><strong>Others and Extras</strong><br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

Job description:<br><br>JOB PURPOSE:To trouble-shoot, repair, re-commission and maintain efficiently field instrumentation for gas turbines, steam turbines, waste heat boilers, and desalination plant and its auxiliaries to ensure efficient operation and reduce equipment availability down time. KEY ACCOUNTABILITIES:Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision. Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work. Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed. Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem. Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned. QUALIFICATIONS & SKILLS:Minimum Qualifications:Higher secondary or diploma Minimum Experience:Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation: Pressure, temperature, level, & flow measuring devices Pneumatic & Hydraulic valve actuation systems CO2 Fire Protection systems Infrared Gas Detection systems Working under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury. He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager. He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills:Must be able to read and understand engineering drawings and manuals. Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices

Job description:<br><br>JOB PURPOSE:To trouble-shoot, repair, re-commission and maintain efficiently field instrumentation for gas turbines, steam turbines, waste heat boilers, and desalination plant and its auxiliaries to ensure efficient operation and reduce equipment availability down time KEY ACCOUNTABILITIES:Attends to Power and Desalination plant field instrumentation breakdowns and planned maintenance work with minimum direction and supervision. Technically assesses the requirement of the allocated jobs and selects the necessary tools and equipment to complete such work. Using the computerized maintenance system, orders the spare parts from the warehouse and maintains records of all maintenance work completed. Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements. Reports repeated breakdowns and assist in RCFA to identify an optimum solution to resolve the problem. Provides on the job training to new craftsmen in order to equip them with the necessary skills to be able to carry out maintenance repair work as planned QUALIFICATIONS & SKILLS:Minimum Qualifications:Higher secondary or diploma Minimum Experience:Must be familiar with all maintenance tools and should have good knowledge of Plant Safety. The knowledge and experience required in the position is that gained previously experience working in a power or desalination plant and with exposure preferably to any of the maintenance and calibration of the following field instrumentation, Pressure, temperature, level, & flow measuring devices Pneumatic & Hydraulic valve actuation systems CO2 Fire Protection systems Infrared Gas Detection systems Working under time and technical pressure, and knowing that any mistake/error made will substantially cost the power station either on delay, equipment damage, or personnel injury. He can be assigned and work on shift duty. He can be called out any time to attend to breakdown work for the shift operation manager. He has to keep abreast with new technologies and control concepts. Working in very hot, dirty environment, and high level platforms. Skills:Must be able to read and understand engineering drawings and manuals. Must have knowledge / experience in the field of electrical, electronics, computer, hydraulic, and pneumatic devices

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Reports to the skipper Takes part in all activities delegated by the skipper Stands with the skipper in the wheel house at every trip to maintain a good lookout as per collision regulations Participates in all emergencies and drills Responds to all emergencies and act as per given duties Reports any unsafe activities to skipper Participate in all cleaning duties. Ensures that vessel is ready for receiving passengers at all times Ensures that there are enough cleaning materials on board Washes the boat externally after each trip and thoroughly at the end of each shift Ensures that all luggage compartments are clean and tidy at all times Completes the passenger manifest prior to departure and ensures the skipper is informed Ensures all lost and found items to be safely handed over to the skipper Does proper handing over to the next shift indicating all the issues encountered Responsible for own personal hygiene Ensures to maintain uniform and keep it in perfect condition Responsible for proper and safe berthing and un-berthing procedures and during line handling<br><br>Qualifications<br><br>Qualifications<br><br>Valid AB Seaman Certification. (Valid CDC with AB (II/4) qualification /Valid STCW/Valid Medical (fit to work at sea) report)<br><br>Proven experience as an AB Seaman, preferably in a hospitality or marine tourism setting. Basic understanding of vessel navigation and seamanship. Strong communication and teamwork skills. Knowledge of safety procedures and emergency response protocols. Ability to perform physically demanding tasks in various weather conditions...<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Overall checking and inspection of 220kV, 132kV, 66kV and 11kV switchyards, switch rooms, control room, relay and control panels, battery chargers, telemetry room, CO2 system, Transformer Tap changers, control panels and other equipments.</p></li><li><p>Note down any abnormalities and inform to Kahramaa’ s System Control.</p></li><li><p>Systematically logging the events and abnormalities like faults, tripping, weather conditions etc. and recording the readings such as voltage, currents, MW, Cable oil pressure, GIS switchgear pressure, Tap Positions etc. as required by the System Control Engineer of Kahramaa.</p></li><li><p>To carryout switching or other operations of equipment in the Substation under direct instructions, if required so by Kahramaa’ s System Control Engineer on duty.</p></li><li><p>Assists the Shift Control Engineer in executing switching programs.</p></li><li><p>Maintains system voltage and frequency at prescribed levels all the time.</p></li><li><p>Assists the Control Engineer for economic load dispatch of active and reactive power to various Power Stations.</p></li><li><p>Participates in the preparation of the daily reports.</p></li><li><p>Assists the shift control engineer during emergencies.</p></li><li><p>Logs system events, alarms, switching operations and other reports from the fields.</p></li><li><p>Attends special tasks assigned by the Head of System Control Section, Senior System Control Engineer and Control Engineers.</p></li><li><p>Performs other related duties as needed upon request by the immediate supervisor.</p></li><li><p>Maintains and updates the filing system for all control Room Records.</p></li><li><p>Maintains manuals and software updated for all relevant systems.</p></li><li><p>Participates in the preparation of the daily reports.</p></li><li><p>Works in cooperation with Quality Assurance and Continual Improvement department on securing and maintaining the ISO 9002 certification.</p></li><li><p>Carries out and ensures the compliance of all activities within the National Control Center Section are in‐line with Kahramaa health and safety regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience: Minimum Five Years’ Experience for diploma holders and Minimum 2 years for Bachelor's Degree holders in the field of operation and Maintenance of Substations with Power Transformers, GIS/Minimum Oil Switchgear and associated equipment of Voltage rating 220kV, 132kV, 66kV, 33kV and 11kV. Knowledge of protection, HV/EHV cables, EHV Overhead Lines and Transformer on‐load tap changers are essential. For Graduate Engineers the minimum experience must be Two years in similar field.</p><p></p></section>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>