Sound Engineering Jobs in Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical and discipline support for all process engineering activities related to Ethane recovery project through integrated FEED and phases ensuring that process designs, studies and engineering deliverables comply with approved industry standards, safety requirements and operational objectives throughout the project lifecycle.</li> </ul><br><ul> <li>Support the process engineering lead with expert level technical advice on process engineering related matters ensuring the provision of high-quality technical services to project.</li> <li>Approve and endorse process engineering designs in accordance with approved standards, codes, and specifications at all stages of the project life cycle.</li> <li>Review and assess concepts, studies, and detailed designs to assess technical suitability, compliance with standards and alignment with end user operational objectives and recommend optimized technical solutions as required.</li> <li>Develop and sustain technical competencies within the discipline by supporting capability building, knowledge transfer and continuous professional development of process engineering resources.</li> <li>Provide technical input to project execution strategies to ensure alignment with discipline and technical requirements, design philosophies and safety and operability standards.</li> <li>Recommend resources planning and deployment to meet the project execution requirements including technical input to recruitment mobilization and competency validation for process personnel.</li> <li>Advise and guide project teams on all process engineering matters throughout all stages of projects that are from concept, FEED, detailed design, construction, commissioning and startup phases.</li> <li>Plan and coordinate the activities of process engineers to ensure timely and effective delivery of technical services of technical services to project execution and operational support teams.</li> <li>Support discipline lead in managing discipline standards and technical assurance, including implementation of standardization initiatives and compliance oversight across projects.</li> <li>Approve and endorse technical deviations, waivers and variations to approved guidelines, codes, standards and practices within the limits of delegated process engineering authority.</li> </ul><br><ul> <li>Bachelor's degree in Engineering.</li> <li>8 years' experience in Engineering roles, including 4 years in the Oil &amp; Gas Industry.</li> <li>Process Engineering specialist level with a broad knowledge of NGL Design and Engineering execution on projects including design standards, specifications, codes, safety criteria, offshore facilities design, construction and operations.</li> <li>FEED and EPC have detailed design experience with large utilities systems in Inlet facilities.</li> <li>Skill / knowledge in application of international standards related to his area of expertise.</li> <li>Excellent written and spoken English.</li> <li>Strong organizational skills.</li> <li>Good analytical and problem-solving skills.</li> <li>Good communication skills.</li> <li>Advanced computer literacy involves the regular use of professional office applications and some technical applications.</li> <li>Knowledge and experience of the Document Control function and Information Management Processes.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical and discipline support for all instrumentation and control engineering activities related to Ethane recovery project through integrated FEED and phases ensuring that process designs, studies and engineering deliverables comply with approved industry standards, safety requirements and operational objectives throughout the project lifecycle.</li> </ul><br><ul> <li>Provide I&amp;C engineering activities across assigned projects, ensuring all activities comply with approved project specifications, LNG standards, safety requirements and of I&amp;C engineering design deliverables meet quality and design safety expectations.</li> <li>Lead work execution, ensuring technical alignment and quality with various disciplines stakeholders from both PMT and contractors providing guidance and clear direction to complete I&amp;C design per project specifications in a timely manner</li> <li>Direct contractors to develop robust execution plans and schedules, reviewing progress data (narrative, charts, graphs), change management recommendations and recovery plans to address schedule delay risks and support monthly progress and stewardship reporting.</li> <li>Support multi-discipline activities providing I&amp;C expertise to other disciplines as necessary, in support of completing activities within schedule and making appropriate recommendations to management on I&amp;C issues.</li> <li>Lead the effort to provide technical interface between key vendors and EPC contractors to ensure alignment with quality and execution objectives and overall project delivery milestones.</li> <li>Represent the I&amp;C engineering in all major project assurance and reviews such as HAZOP, HAZID, SIL, SAFOP etc.</li> <li>Prepares high-quality written documents to support FEED (NFW) and EXECUTE (NFS) activities and relevant PMS Gate reviews.</li> <li>Prepare and deliver effective oral presentations to support the discipline Head and PMT in day-to-day project activities.</li> <li>Support the Discipline Head in governing LNG discipline standards and technical assurance frameworks, ensuring effective implementation of standardization activities and compliance oversight of engineering resources across projects.</li> <li>Approve and endorse I&amp;C technical deviations, waivers, and variations to approved guidelines, codes, standards, and practices with delegated technical authority.</li> </ul><br><ul> <li>Bachelor's degree in Engineering.</li> <li>8 years' experience in Engineering roles, including 4 years in the oil &amp; gas industry, and 1 years' experience in a supervisory or acting role, or oversight of contractor sub-contractors / service / vendor personnel.</li> <li>Basic knowledge of Hexagon Smart Plant Instrumentation (SPI).</li> <li>Experience in project development studies, FEED &amp; Detailed engineering development. Experience in selection and handling various Field and Control Room Telecommunication equipment / packages including DCS / ESD / SCADA / F&amp;G fibre optic and radio communications systems encountered in the oil &amp; gas industry.</li> <li>Experience in engineering coordination with various discipline engineers during FEED &amp; Detailed engineering development and management of such contracts.</li> <li>Experience in commissioning &amp; startup and troubleshooting of Instrumentation Control and Telecommunication equipment encountered in oil &amp; gas processing facilities.</li> <li>Knowledge of international standards related to his area of expertise.</li> <li>Advanced computer literacy involves the regular use of professional office applications and some technical applications.</li> <li>Knowledge and experience of the Document Control function and Information Management Processes.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

The<br><br>Engineering Logistics Portal (ELP) Operator will be responsible for the<br><br>management of all Typhoon repairable assets which have failed at Forward and<br><br>require tasking via the ELP process.<br><br>The post holder will<br><br>supervise of all assets as they pass through the Quality Gate, Engineering<br><br>Tasking and Repair Scheduling. Directly interfacing with the Part M engineer,<br><br>Repairs Inventory Planner and Part M Repair Scheduler.<br><br>Core Activities<br><br>Completion of activities – Ensure all ML2/ML4 activities and transactions are appropriately documented and maintained on the IMS system. Support daily activities including facilitation, deputation and management of reviews where necessary. Provide effective demand management for all ML2/ML4 activities by meeting delivery targets, monitoring and reviewing performance against contractual KPI’s . Ensure any shortfalls are identified, resolved or escalated where necessary. Support the team, and compile appropriate reporting mechanisms to identify any issues, resolve or escalate as appropriate. They will also be responsible for the facilitation, deputation and management of reviews where necessary. Ensure that department procedures and processes are in place and adopted to ensure safe working. Management and maintenance of effective working relationships with all stakeholders. Liaison with (and provide specialist advice and guidance to) inventory planning, procurement, engineering, finance and line/bay maintenance in order to overcome supply and demand problems, liaison also extends to service providers and partners. Analysis and interpretation of usage and transaction data to identify repetitive problems and inform appropriate stakeholders and where appropriate support the implementation of any corrective action. Facilitate the progression and hastening of urgently required items. Support team members in generating the required work output to meet all requirements of the business, customer and contract. Support the creation of the supply chain operations infrastructure to deliver the contract. Support the continuous development of the Supply Chain procedures ensuring a safe working environment. Mentoring the QEAF staff as they join the MOB Organisation from the Qatar Technical Institute in repair activities. Ensure all ML2/ML4 assets routed through the Engineering Portal for Engineering Quality Checks and Repair Scheduling. All repairs carried out to meet DF&P requirement. Interface with the Store’s supervisor and controller, Part M engineer, Repairs Inventory Planner and Part M Repair Scheduler. Hold regular Repair Reviews to ensure that items are delivered back to the internal customers in line with these requirements. The post holder will be required to use performance data and metrication to highlight successes and potential issues to senior management. Ensure both internal and external customers receive the level of service expected of business KPIs; specifically the QEAF Typhoon Fleet receives what they need on time and to the highest quality. Support the analysis and interpretation of Supply Chain data to identify repetitive problems and inform appropriate stakeholders. Where appropriate, support the implementation of any corrective action.<br><br>Key Accountabilities<br><br>Performance Indicators – Provide effective asset management by meeting business objectives and delivering targets, monitoring progress to ensure trends are identified and enacted upon to reduce impact on continuing airworthiness or contractual KPIs. Resolve problems where necessary and escalate issues to the Supply Chain Operations Manager as appropriate. Completion of activities – Ensure all asset management activities and transactions are appropriately documented and maintained on the IMS system. Procedure/Standards – Ensure the team are compliant with the QEAF CAME/ 145 MOE, and their associated Safety Management System – Understand and apply human factors, error management, risk and safety management, within Part M and 145 Maintenance areas. Compliance & Assurance – Ensure demand management activities are compliant with the Part M procedures, in conjunction with the Part 145 Maintenance Governance and Assurance framework. Support any audits and respond to any findings in a timely manner. Statutory / Regulatory & Legislation requirements – Able to demonstrate a detailed understanding and application of the Continuing Airworthiness Regulatory Framework and ensure the organisation is advised of any changes; ensure compliance with all other requirements, e.g. ITAR/WOME. Contractual Requirements – Ensure personal and team awareness of all applicable contractual requirements and incorporate any changes into activities as appropriate.<br><br>Requirements<br><br>Requires knowledge of an operational supply chain in a Continuous Airworthiness Organisation, protocols and procedures. Understands where and how to gather asset requirement information, and how to interpret this information in a range of situations. Has strong relationships within maintenance operations and all its dependency functions e.g. procurement, engineering disciplines, partner, supplier and customer organisations. Must understand constraints and lead times associated with ML2/ML4 activity and the importance of prioritisation. Working with the appropriate stakeholders to ensure as much up front planning is done in a proactive manner to avoid any unnecessary priority demands. Requires a basic functional awareness that will be developed over the life cycle of the role. Continuous improvement, capability development and sustainment are also an integral part of the role. Requires analysis and planning skills along with key relationship building and problem solving skills, able to use appropriate IT systems. This person would be seen as competent in Supply Chain/Maintenance operations working as a joint team and be able to define the processes, propose improvements and manage those improvements in the day to day running of the operation. Valid Driving Licence Institute of Supply Chain Management Level 3 or its equivalent is desirable but not essential.

The<br><br>Engineering Logistics Portal (ELP) Operator will be responsible for the<br><br>management of all Typhoon repairable assets which have failed at Forward and<br><br>require tasking via the ELP process.<br><br>The post holder will<br><br>supervise of all assets as they pass through the Quality Gate, Engineering<br><br>Tasking and Repair Scheduling. Directly interfacing with the Part M engineer,<br><br>Repairs Inventory Planner and Part M Repair Scheduler.<br><br>Core Activities<br><br>Completion of activities – Ensure all ML2/ML4 activities and transactions are appropriately documented and maintained on the IMS system. Support daily activities including facilitation, deputation and management of reviews where necessary. Provide effective demand management for all ML2/ML4 activities by meeting delivery targets, monitoring and reviewing performance against contractual KPI’s . Ensure any shortfalls are identified, resolved or escalated where necessary. Support the team, and compile appropriate reporting mechanisms to identify any issues, resolve or escalate as appropriate. They will also be responsible for the facilitation, deputation and management of reviews where necessary. Ensure that department procedures and processes are in place and adopted to ensure safe working. Management and maintenance of effective working relationships with all stakeholders. Liaison with (and provide specialist advice and guidance to) inventory planning, procurement, engineering, finance and line/bay maintenance in order to overcome supply and demand problems, liaison also extends to service providers and partners. Analysis and interpretation of usage and transaction data to identify repetitive problems and inform appropriate stakeholders and where appropriate support the implementation of any corrective action. Facilitate the progression and hastening of urgently required items. Support team members in generating the required work output to meet all requirements of the business, customer and contract. Support the creation of the supply chain operations infrastructure to deliver the contract. Support the continuous development of the Supply Chain procedures ensuring a safe working environment. Mentoring the QEAF staff as they join the MOB Organisation from the Qatar Technical Institute in repair activities. Ensure all ML2/ML4 assets routed through the Engineering Portal for Engineering Quality Checks and Repair Scheduling. All repairs carried out to meet DF&P requirement. Interface with the Store’s supervisor and controller, Part M engineer, Repairs Inventory Planner and Part M Repair Scheduler. Hold regular Repair Reviews to ensure that items are delivered back to the internal customers in line with these requirements. The post holder will be required to use performance data and metrication to highlight successes and potential issues to senior management. Ensure both internal and external customers receive the level of service expected of business KPIs; specifically the QEAF Typhoon Fleet receives what they need on time and to the highest quality. Support the analysis and interpretation of Supply Chain data to identify repetitive problems and inform appropriate stakeholders. Where appropriate, support the implementation of any corrective action.<br><br>Key Accountabilities<br><br>Performance Indicators – Provide effective asset management by meeting business objectives and delivering targets, monitoring progress to ensure trends are identified and enacted upon to reduce impact on continuing airworthiness or contractual KPIs. Resolve problems where necessary and escalate issues to the Supply Chain Operations Manager as appropriate. Completion of activities – Ensure all asset management activities and transactions are appropriately documented and maintained on the IMS system. Procedure/Standards – Ensure the team are compliant with the QEAF CAME/ 145 MOE, and their associated Safety Management System – Understand and apply human factors, error management, risk and safety management, within Part M and 145 Maintenance areas. Compliance & Assurance – Ensure demand management activities are compliant with the Part M procedures, in conjunction with the Part 145 Maintenance Governance and Assurance framework. Support any audits and respond to any findings in a timely manner. Statutory / Regulatory & Legislation requirements – Able to demonstrate a detailed understanding and application of the Continuing Airworthiness Regulatory Framework and ensure the organisation is advised of any changes; ensure compliance with all other requirements, e.g. ITAR/WOME. Contractual Requirements – Ensure personal and team awareness of all applicable contractual requirements and incorporate any changes into activities as appropriate.<br><br>Requirements<br><br>Requires knowledge of an operational supply chain in a Continuous Airworthiness Organisation, protocols and procedures. Understands where and how to gather asset requirement information, and how to interpret this information in a range of situations. Has strong relationships within maintenance operations and all its dependency functions e.g. procurement, engineering disciplines, partner, supplier and customer organisations. Must understand constraints and lead times associated with ML2/ML4 activity and the importance of prioritisation. Working with the appropriate stakeholders to ensure as much up front planning is done in a proactive manner to avoid any unnecessary priority demands. Requires a basic functional awareness that will be developed over the life cycle of the role. Continuous improvement, capability development and sustainment are also an integral part of the role. Requires analysis and planning skills along with key relationship building and problem solving skills, able to use appropriate IT systems. This person would be seen as competent in Supply Chain/Maintenance operations working as a joint team and be able to define the processes, propose improvements and manage those improvements in the day to day running of the operation. Valid Driving Licence Institute of Supply Chain Management Level 3 or its equivalent is desirable but not essential.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job TR-1028 - Engineering Lead (Piping) <p>Qualifications*</p><br><p>Bachelor degree in Mechanical Engineering.</p><br> <p>Knowledge and/or Experience*8 years of experience in Engineering roles, including 4 years in the oil &amp; gas industry, including 1 year in a supervisory or acting role, or oversight of contractor sub-contractors/service/vendor personnel.<br>Basic knowledge of 3D Modeling software (PDS/SP3D).<br>Senior Piping and Layout Engineering supervisory level with a broad knowledge Engineering execution on projects including design standards, specifications, codes, safety criteria, onshore facilities design, construction and operations.<br>FEED and EPC detailed design experience<br>Skill / knowledge in application of international standards in his area of expertise.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Hiring: Engineering Lead (Electrical – Power Supply) | Doha, Qatar</strong><br>Join a major LNG megaproject in Qatar and play a key role in leading Electrical Engineering activities across design, procurement, installation, pre-commissioning, commissioning, and start-up phases.<br> <strong>Location:</strong> Doha - Ras Laffan, Qatar<br> <strong>Contract Type:</strong> Long-Term Contract<br> ️ <strong>Work Schedule:</strong> 100% Onshore<br> <strong>Rotation:</strong> 12 Weeks ON / 2 Weeks OFF<br> <strong>Working Days:</strong> 6 Days per Week<br> ⏰ <strong>Working Hours:</strong> 8-10 Hours per Day<br> Job Purpose The Engineering Lead (Electrical – Power Supply) will be responsible for overseeing all Electrical Engineering activities related to a major LNG project, ensuring full compliance with project specifications, industry standards, and company requirements.<br> The role will provide technical leadership to EPC contractors, vendors, subcontractors, and stakeholders while ensuring safe and efficient delivery of large-scale power generation and distribution systems throughout the project lifecycle.<br> Key Responsibilities <br>✅ Lead and oversee Electrical Engineering design, procurement, installation, testing, commissioning, and start-up activities.<br> ✅ Ensure compliance with project specifications, standards, regulations, and technical requirements.<br> ✅ Provide technical guidance and support to EPC contractors, vendors, and subcontractors.<br> ✅ Review and evaluate electrical simulations, power system studies, and optimization activities.<br> ✅ Support design and integration of:<br><ul><li>HV/MV/LV Electrical Systems</li><li>Power Generation Systems</li><li>Power Management Systems (PMS)</li><li>Electrical Integrated Control Systems (ELICS)</li><li>Transformers</li><li>Switchgear</li><li>Large Motors (40MW+)</li><li>VFD Systems</li></ul>✅ Review electrical equipment purchase orders and vendor documentation.<br> ✅ Monitor project progress and electrical engineering deliverables to ensure milestones are achieved.<br> ✅ Assess technical risks and provide solutions to complex electrical engineering challenges.<br> ✅ Support construction, pre-commissioning, commissioning, start-up, and performance testing activities.<br> ✅ Coordinate electrical interfaces with external stakeholders including utilities, licensors, and power suppliers.<br> ✅ Develop and update electrical engineering philosophies, specifications, standards, and procedures.<br> ✅ Participate in change management reviews and recommend recovery plans when required.<br> Qualifications <br> Bachelor's Degree in Electrical Engineering<br> Experience Required <br>✔ Minimum 8 years of Electrical Engineering experience<br> ✔ Minimum 4 years of experience within the Oil &amp; Gas industry<br> ✔ Minimum 1 year in a supervisory, acting leadership, or contractor oversight role<br> ✔ Experience supporting EPC projects<br> ✔ Preferred experience on major LNG projects<br> ✔ Experience with large-scale industrial power systems and high-voltage networks<br> Technical Requirements <br>✔ HV/MV/LV Power Distribution Systems<br> ✔ Power Generation &amp; Distribution Systems<br> ✔ Combined Cycle Power Generation<br> ✔ Power Management Systems (PMS)<br> ✔ Electrical Integrated Control Systems (ELICS)<br> ✔ Large Motors (40MW+)<br> ✔ Variable Frequency Drives (VFD)<br> ✔ Transformers &amp; High Voltage Switchgear<br> ✔ Electrical Load Flow &amp; System Studies<br> ✔ Electrical Protection &amp; Control Systems<br> ✔ Onshore LNG Facilities &amp; Utility Systems<br> ✔ Familiarity with international Electrical Codes &amp; Standards<br> Required Skills <br>✔ Excellent English communication skills<br> ✔ Strong stakeholder management capabilities<br> ✔ Strong planning and coordination skills<br> ✔ Leadership and team management abilities<br> ✔ Technical problem-solving and decision-making skills<br> ✔ Proficiency in Microsoft Office Suite<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>To lead and be responsible for the Rotating Equipment engineering input into the design, procurement, fabrication, installation and commissioning of the offshore facilities design of BH and MM Redevelopment Projects with focus on the successful execution of the project on time, within budget and in accordance with the agreed project requirements, specifications and standards.</li> </ul><br><p>* Accountable for the technical integrity of the engineering and design activities within the Rotating equipment discipline and for ensuring that safe, cost efficient and on-time design is developed for the project.* Be responsible for and provide direction to the technical services in the Rotating engineering elements of the project scope, with special attention to the Design Basis, EPIC scope preparation and execution, design/safety/operations reviews, procurement of Equipment, factory acceptance test, vendor selection, and timely resolution of technical and engineering issues, in coordination with Engineering Manager, other discipline Heads and relevant stakeholders.<br>* Be the project's technical expert (TA-2) in the Rotating equipment discipline and will have Technical Authority for disciplines under his organisation. Will have the authority, depending upon their level of expertise/delegated authority, to approve any deviation from DEM-1 (Shall PS). However, they need to discuss the deviation with their reporting line i.e. Department Assistant Managers in Doha for their consent before giving their approval to any deviation to DEM-1 requirements. However, if a technical deviation is beyond their authority level, then they are required to engage relevant (TA- 1), essentially department Assistant Managers, for their review and approval of deviations to DEM-1 requirements.* Responsible to provide sufficient information and technical justification to the Engineering Manager for any technical deviation for his final decision. Engineering Manager will have the delegated TA0 authority for final approval of any technical deviation.<br>* Responsible to thoroughly investigate any proposed technical deviation and ensure that the deviation doesn't compromise any safety in design but is helpful to optimise the design, improve the availability &amp; operability of the facilities and will optimise project cost without impacting timely Project delivery.* Ensure that risks associated with the technical deviations are as low as reasonably possible (ALARP) and properly documented.<br>* Lead the Rotating equipment team in developing design scope and ensure that all related deliverables are in compliance with the applicable codes, standards, Project and Corporate requirements and procedures.* Coordination of all engineering related reviews including Design Reviews (ITR/PSDR/DRR etc.), ENVID, HAZID, HAZOP, SIL, Bowties, ALARP, SAFOP, SIMOPS, 3D model reviews and Constructability etc. To ensure that all the relevant documents are in place to carry out these reviews effectively and efficiently.<br>* Coordinate and align the Rotating discipline interfaces between the project phases and direct the contractors design efforts accordingly taking into account safety, start-up, cost and constructability impacts.* Establish professional work relationships with EPIC contractor, represents interest and direct contractors with any technical queries and interpretation of scope, specifications and standards.<br>* Maintain an overview of the project Rotating capability and highlight to Engineering Manager any critical resourcing issues.* Participate in Project Assurance reviews and Audits and ensure findings are effectively closed out.<br>* Provide technical guidance and prepare the Rotating engineering specific elements for the EPIC tender, procurement activities, technical bid evaluation, technical queries raised by contractors.* Participate in Technical bid evaluation and provide necessary guidance in selecting the EPIC Contractors.<br>* Lead the selection of suitable technology, equipment, field devices, and other Rotating specific systems as per design, evaluate options and select best techno-economic solutions for project facilities.* Endorse the Rotating design calculation reports, system studies, design philosophies, software model input and output, drawings, data bases, specifications and vendor data.<br>* Provide technical guidance during engineering stages of the project and monitor the implementation of QA/QC processes, in order to achieve deliverables and facilities that meet project requirements.* Provide guidance and support to conduct Safety and Design Reviews in coordination with other discipline Heads and Rotating Engineers.<br>* Supervise team members and support the development of Qatari Nationals by ensuring that they receive proper job training and development.</p><br><br><ul> <li>Sc. degree or Higher in Mechanical Engineering from a recognized university; higher degree would be advantageous.</li> <li>Membership of a relevant recognized professional engineering association/institution is preferable.</li> <li>A minimum of 15 years' experience in Rotating engineering design in Oil &amp; Gas Industry, with an Oil &amp; Gas Company or Contractor/Consultant, of which at least 10 years should have been in offshore Oil &amp; Gas processing projects.</li> <li>Of the 15 years' experience, a minimum of 8 years should have been a senior Rotating Engineer in a major project and a minimum of 7 years as Lead Discipline in design of major projects in a reputable engineering consultant, EPIC contractors or Oil &amp; Gas Company.</li> <li>Fully familiar with Shell DEP's and other international design codes and standards.</li> <li>Fully familiar with Mechanical Engineering software's and design review.</li> <li>Familiar with all types of EPIC deliverables, equipment, design and construction progress reviews.</li> <li>Proven ability to manage respective discipline engineering team in a major project environment.</li> <li>Fundamental knowledge to level of "proficient" or preferably level of " mastery" in respective discipline engineering with added strength in the other disciplines to level of " developed".</li> <li>Strong technical, planning, communication, reporting and leadership skills.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours/ 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster response protocols. Respond and attend to guest repair requests.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 2 years of related work experience.<br>Supervisory Experience: At least 2 years of supervisory experience.<br>License or Certification: None&nbsp;<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Element, we believe that travelers deserve more than a place to stay. They need a place to thrive, where they can start every day feeling fresh, focused, and alive. Whether they’re stopping by for a few days or settling in for a few weeks, time away from home shouldn’t mean time away from life. Our travelers recognize and appreciate our approachable, multidimensional staff, who are energized by helping guests find their balance at Element. We help our guests live life away as they do at home, no matter how long they stay, with an eco-minded philosophy and a passion for well-being. If you’re an active optimist who doesn’t second guess connecting with like-minded guests and creating a warm, comforting space for yourself and those around you, we invite you to explore career opportunities with Element. In joining Element, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Primary Purpose Of The Job<br><br>Provide professional advice, expertise and practical assistance to OV organization<br><br>in managing OV Manpower Call-Off Contract, new tendering / contractual matters (if any)<br><br>from inception of tender scope preparation until closeout of contracts.<br><br>Required Experience And Skills<br><br>15 years multi-disciplinary experience, including 10 years in an oil & gas industry<br><br>or with major industrial structures in the preparation/evaluation/negotiation of<br><br>tenders/contracts of large scale contracts with complexity and diversity.<br><br>Educational Qualifications<br><br>BSc in Engineering Discipline or Quantity Surveying. A postgraduate qualification<br><br>in Contract Management or Project Management desirable.

Role: Network Engineer Location: Qatar<br>Must have skills: Load Balancing, Networking, Cisco ESA, Fortinet IPS,F5 ASM, Dev Ops, on-premise to Cloud migration, Cisco ACIRequired Network Engineer with 8+ years of Cisco Data Center Networking experience. Strong hands-on expertise in Cisco ACI including Nexus 9K hardware, leaf. Spine fabric design and sizing, ACI policy model and APIC operations. Solid L3 routing skills (BGP, OSPF) and data center security concepts. Experience with automation using REST APIs, Terraform, and Ansible. In-depth knowledge of ACI logical objects such as tenants, VRFs, bridge domains, EPGs, contracts, L3Out design and implementation, and service graphs with PBR. Hands-on experience with F5 Application Delivery Controllers (LTM, APM) and enterprise firewalls including Palo Alto, Fortinet, and Check Point. Strong automation and scripting skills using IaC tools (Ansible, Terraform) and CI/CD pipelines with Git-based workflows. Proficient in Linux CLI, TCP/IP, DNS, load balancing, and monitoring tools such as Prometheus, Grafana, and ELK for proactive troubleshooting.

Electrical Engineer – Hospital Facility | Qatar | Arabic Job Summary We are seeking an experienced Electrical Engineer to manage electrical maintenance and engineering activities within a hospital facility in Qatar, ensuring safe, reliable, and efficient operation of all electrical systems. Key Responsibilities Supervise preventive and corrective maintenance of hospital electrical systems. Inspect, test, troubleshoot, and maintain electrical equipment and systems. Ensure reliable operation of LV/MV systems, generators, UPS, ATS, emergency power systems, lighting, and distribution boards. Monitor equipment performance and ensure critical systems remain operational. Coordinate with maintenance teams, contractors, and hospital stakeholders. Ensure compliance with Qatar regulations, safety standards, and hospital requirements. Maintain maintenance records, inspection reports, and technical documentation. Respond to electrical emergencies and support continuous improvement initiatives. Requirements Bachelor’s Degree in Electrical Engineering or related field.3–5+ years of experience in electrical maintenance. Hospital/healthcare facility experience is highly preferred. Strong Facility Management / MEP experience. Good knowledge of electrical systems, generators, UPS, emergency power, and building services. Fluent Arabic and English – Arabic is mandatory. Strong troubleshooting, communication, and problem-solving skills. Qatar/GCC experience preferred. Ability to work in a critical healthcare environment.

Company Description ONE A Design, Build and Trading is a fully integrated firm providing turnkey architectural, interior design, fit-out, and construction management services. The company positions itself as a one-stop shop, combining design expertise with execution capabilities to deliver cohesive, high-quality projects. Backed by a multinational team of highly qualified professionals, ONE A thrives on challenging assignments and emphasizes solution-oriented, collaborative work. To strengthen its offerings, the firm partners with leading building materials suppliers and strategic industry allies, ensuring access to premium finishes and innovative methods. The company focuses on delivering high-class service that meets clients’ aesthetic goals while simplifying the project experience and enhancing overall quality of life. Role Description The Site Engineer will oversee day-to-day site activities, ensuring that construction and fit-out works are executed according to design specifications, quality standards, safety regulations, and project schedules. Responsibilities include coordinating with civil and structural engineers, contractors, and subcontractors; monitoring progress; resolving site issues; and reporting to project management on timelines, costs, and technical matters. The role involves conducting regular inspections, implementing quality control procedures, reviewing drawings and technical documents, and ensuring alignment between design intent and on-site execution. The Site Engineer will also support material approvals, attend site meetings, and liaise with clients and consultants as needed. This is a full-time, on-site role based in Doha, Qatar. Qualifications Strong on-site supervision and construction management skills, with the ability to coordinate daily site operations and multiple stakeholders. Effective communication skills for collaborating with project teams, contractors, consultants, and clients, and for preparing clear reports and documentation. Experience in quality control, including site inspections, compliance with standards, and implementation of corrective measures. Solid foundation in structural engineering and civil engineering principles, with the ability to interpret technical drawings and specifications. Bachelor’s degree in Civil Engineering or related field; professional certification or registration is an advantage. Knowledge of local building codes, safety regulations, and industry best practices in Qatar or the GCC region. Proficiency in relevant engineering and construction software (e.g., Auto CAD, MS Office, project management tools). Demonstrated ability to work independently, make sound technical decisions, and manage timelines in a fast-paced project environment.

Commissioning Engineer (Electrical) | Qatar Offshore <br><br>We're looking for an experienced Commissioning Engineer (Electrical) to support a major offshore oil & gas project based in Qatar.<br><br>Requirements<br><br>B. E./B. Sc. Degree in Mechanical, Electrical, or Instrumentation Engineering Minimum 15 years of commissioning experience within the oil & gas industry or similar facilities Proven experience in brownfield modifications, including offshore projects Experience working in a multicultural environment Strong written and spoken English communication skills<br><br>Key Responsibilities<br><br>Coordinate and prepare commissioning dossiers for offshore operations teams Ensure compliance with technical standards and internationally accepted engineering practices Support safe and efficient commissioning of plant and equipment Interface with offshore operations and project teams throughout the commissioning phase Interested candidates may send their updated CV to:<br><br>norniqmahabkarim@airswift.com

Location: Doha, Qatar Employment Type: Full-time<br>A leading company in Doha is seeking an experienced Architectural Engineer with strong capabilities in project management and interior fit-out projects.<br>The successful candidate will be responsible for managing projects from planning through completion, coordinating with clients, consultants, contractors, suppliers, and internal teams, while ensuring quality, timelines, and project requirements are achieved.<br>Key Responsibilities Manage architectural and interior fit-out projects from planning to final handover. Coordinate daily activities between clients, consultants, contractors, suppliers, and site teams. Review architectural drawings, technical specifications, materials, and project requirements. Monitor project schedules, quality standards, site progress, and deliverables. Attend client and site meetings and prepare project updates. Identify project risks, delays, and technical issues and coordinate suitable solutions. Ensure work is completed according to approved drawings and required quality standards. Represent the company professionally in selected social media content, project videos, and site presentations. Cooperate with the marketing team to explain projects, technical details, and construction or fit-out stages clearly and professionally. Requirements Bachelor’s degree in Architecture or Architectural Engineering. Minimum 5 years of proven professional experience in Doha, Qatar. Demonstrated experience in architectural project management and interior fit-out projects. Strong knowledge of project execution, finishing materials, technical drawings, and site coordination. Proficiency in relevant architectural and project management software. Strong communication, presentation, leadership, and problem-solving skills. Comfortable appearing in professional company videos and social media content. Ability to communicate effectively in English; Arabic is an advantage. Currently based in Qatar with a valid Qatar Residence Permit. Relevant Doha projects must be clearly demonstrated in the CV or project portfolio. How to Apply<br>Interested candidates may submit their updated CV through the following application form:<br>Only shortlisted candidates whose experience matches the role requirements will be contacted.

Job Summary The Procurement Engineer is responsible for sourcing and purchasing materials, equipment, and services required for Power, Infrastructure, and Construction projects. The role works closely with Engineering, Projects, and Site teams to ensure materials are procured with the required quality, competitive cost, and on-time delivery.<br>Key Responsibilities Manage procurement of electrical, mechanical, civil, construction, and infrastructure materials and equipment. Review technical specifications, drawings, BOQs, and purchase requisitions. Source and develop qualified suppliers and manufacturers. Obtain, evaluate, and compare supplier quotations. Coordinate with Engineering and Project teams for technical approvals. Negotiate prices, payment terms, delivery schedules, and other commercial conditions. Prepare and process purchase orders in line with company procedures. Follow up with suppliers to ensure timely delivery as per project requirements. Monitor critical and long-lead materials and equipment. Coordinate with Site, Quality, Logistics, and Warehouse teams for inspection and delivery. Monitor supplier performance and resolve quality, delivery, and commercial issues. Maintain supplier and procurement records in SAP/ERP systems. Support cost-saving and value-engineering initiatives. Conduct market research for suppliers, pricing, availability, and alternative materials. Ensure procurement activities comply with company policies, project requirements, quality standards, and HSE requirements.<br>Key Skills Good knowledge of procurement for Power, Infrastructure, and Construction projects. Knowledge of electrical, mechanical, civil, and construction materials and equipment. Ability to understand technical specifications, drawings, BOQs, and project requirements. Good quotation evaluation and negotiation skills. Strong supplier management and follow-up skills. Good communication and coordination skills. Good knowledge of MS Office and Excel. SAP/ERP procurement experience is preferred.<br>Experience Minimum 8 years of total experience. Minimum 5 years of relevant procurement experience in Power, Infrastructure, Construction, EPC, Utilities, or related industries. Experience in procurement of project materials and equipment is essential. GCC experience is an advantage.<br>Education Bachelor's degree in engineering, Procurement, Supply Chain, or a related field. Professional certification in Procurement or Supply Chain is an advantage.

Primary Purpose Of The Job<br><br>Provide professional advice, expertise and practical assistance to OV organization<br><br>in managing OV Manpower Call-Off Contract, new tendering / contractual matters (if any)<br><br>from inception of tender scope preparation until closeout of contracts.<br><br>Required Experience And Skills<br><br>15 years multi-disciplinary experience, including 10 years in an oil & gas industry<br><br>or with major industrial structures in the preparation/evaluation/negotiation of<br><br>tenders/contracts of large scale contracts with complexity and diversity.<br><br>Educational Qualifications<br><br>BSc in Engineering Discipline or Quantity Surveying. A postgraduate qualification<br><br>in Contract Management or Project Management desirable.

Job Role The Planning Engineer is responsible for supporting project planning, scheduling, progress monitoring, and reporting activities for EPC Oil & Gas and Power Plant projects. The role involves developing and maintaining Primavera P6 schedules, monitoring project progress, validating performance data, and preparing planning reports to support effective project control and timely project delivery.<br>Key Responsibilities Develop, update, and maintain project schedules using Primavera P6 in accordance with approved WBS, activity coding structures, and project requirements. Support the Lead Planner in maintaining Level 3 and Level 4 project schedules, ensuring proper activity sequencing, logic links, and schedule integrity. Collect, review, and validate progress updates from engineering, procurement, construction teams, contractors, and subcontractors. Update project progress in Primavera P6, including actual dates, remaining durations, and forecast completion dates. Monitor project performance against approved baseline schedules and identify schedule deviations, delays, and potential risks. Prepare planning reports including weekly/monthly progress reports, S-curves, manpower histograms, productivity reports, and schedule dashboards. Perform schedule analysis including critical path review, progress variance analysis, and support recovery planning activities. Verify reported progress against physical achievements, quantities, and approved progress measurement systems. Coordinate with project stakeholders to obtain timely schedule inputs and resolve planning data discrepancies. Provide planning data support for cost control activities, including CPI/SPI analysis, forecasting, and project performance reporting. Maintain schedule documentation, baseline records, progress updates, change logs, and planning reports. Support continuous improvement of planning procedures, templates, and reporting systems.<br>Qualifications & Experience Education Bachelor’s Degree in Engineering, Construction Management, Project Management, or related discipline. Professional certification or progress toward certification is preferred:PMI Scheduling Professional (PMI-SP) AACE Planning & Scheduling Professional (PSP) Equivalent project planning certification Experience Minimum 3–6 years of experience in project planning and scheduling within EPC projects, preferably in Oil & Gas, Pipeline, Petrochemical, or Power Plant projects. Hands-on experience with Primavera P6 for schedule development, progress updating, baseline management, and critical path analysis. Knowledge of project controls practices, including progress measurement, S-curves, manpower histograms, productivity tracking, and schedule variance analysis. Experience in project progress monitoring, reporting, and coordination with engineering, procurement, construction, commissioning teams, and contractors. Proficient in Microsoft Excel and Power BI for project reporting and performance dashboards.

Location : Doha and Ras Laffan<br>In line with QNV 2030, the development of a sustainable Qatari workforce is one of the key priorities at Nakilat, so as to ensure Qatari Nationals are given the proper opportunity to develop their careers that would enable them to eventually take on positions of higher responsibility.<br>Nakilat provides job opportunities to Qatari Fresh Graduates, where comprehensive Individual Development Plan (IDP), is offered to selected candidates, with structured development plan, to gain on job training and prepare them to take up their future roles competitively.<br>If you are ambitious to work with one of the largest maritime industries, and meeting the following criteria, please click on the link to apply for this job.<br>Qualifications:Bachelor’s degree in Finance / Accounting ,Degree should be recognized by the Ministry of Education and Higher Education (QATAR). GPA 2.5 and above<br>Technical Qualification:Fluent in English language – IELTS level 6.0 (or equivalent) Computer literacy in MS Office (Word, Excel, Power Point, and Outlook). Excellent interpersonal skills and communication skills.<br>Sponsorship:Not Academically sponsored by another entity within Qatar.

Job Title: Sales Engineer Job Location: Qatar<br>Job Summary We are looking for a Sales Engineer with experience in building materials and construction chemicals to develop new business opportunities and manage client relationships in the Qatar market. The ideal candidate should have strong technical and sales skills, and a proven track record of achieving sales targets.<br>Requirements Bachelor's degree in Engineering. Minimum 2 years of relevant sales experience in building materials and construction chemicals. Proven experience and strong knowledge of the Qatar market. Valid Qatar Driving License. Strong sales, communication, negotiation, and client relationship management skills. Proven ability to develop new business opportunities and achieve sales targets.

*Planning Engineer (Desalination plant experience)*<br>• Bachelor’s Degree in Civil Engineering, Mechanical Engineering, or a related field.• 5+ years of experience as a Planning Engineer, preferably in water, desalination, infrastructure, or industrial projects.• Strong experience in baseline preparation and progress updating.• Proficiency in Primavera P6 and MS Excel.• Good knowledge of project scheduling, progress measurement, and reporting.• Candidates with Qatar/GCC project experience will be preferred.• Valid QID and NOC• Immediate Joiners preferred