Ship Mechanic Jobs

<p>Conduct visual and dimensional inspection of weld joints. Verify compliance with WPS, PQRs, and welder qualifications. Monitor welding processes and ensure adherence to quality procedures. Identify welding defects and issue non-conformance reports (NCRs) as needed. Maintain inspection records, welding logs, and related documentation. Coordinate with welding engineers, site supervisors, and third-party inspectors.</p><p><strong>Desired Candidate Profile</strong></p><p>High School graduate or higher, majored in Engineering (Mechanical). Minimum 5 year working experiences in oil, gas and petrochemical projects, out of which minimum 3 years in inspection experiences on welding/ piping erection. Experiences in Saudi Aramco projects is preferred and highly recommended. Shall be certified as an American Welding Society (CWI), CSWIP 3.1 Certified Welding Inspector or higher, or SaudiAramco approved equivalent. ASNT Level II qualification is recommended. Shall have a demonstrated background and thorough knowledge of codes such as ASME B31.3, 31.4 and31.8, ASME Section V and IX, API 620 and 650, AWS D1.1. Good Knowledge on Nondestructive Testing (NDT) and welding process. Good knowledge on procedures relevant welding/ piping erection works.</p>

<p>Requirement:</p><p>- Lead end‑to‑end management of overseas projects, from business development and proposal stage through execution, commissioning, and final acceptance</p><p>- Act as the single point of accountability for project performance, timelines, cost control, and technical compliance</p><p>- Support business development activities, including technical input for tenders, project feasibility, risk assessment, and client engagement</p><p>- Oversee engineering, procurement, construction, and commissioning (EPCC) activities for water treatment projects</p><p>- Ensure proper application of industrial wastewater treatment and seawater desalination technologies</p><p>- Provide expert oversight on systems involving chemicals, membranes, and filter elements</p><p>- Monitor project risks and implement mitigation strategies across technical, commercial, and operational areas</p><p>- Ensure projects comply with contractual specifications, quality standards, and regulatory requirements</p><p><br></p><p>Experience and Education:</p><p>- Bachelor’s degree in Engineering (Chemical, Environmental, Mechanical, or related technical discipline preferred)</p><p>- Extensive experience in industrial wastewater treatment and/or seawater desalination projects</p><p>- Strong professional background in:</p><p>- Proven track record managing international or overseas projects</p><p>- Experience covering both technical and commercial aspects of project delivery</p><p>- Strong leadership, decision‑making, and stakeholder management skills</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<strong>Company Name:</strong> GREENLAND GROUP<br><br><strong>Location:</strong> Qatar<br><br><strong>Job Type:</strong> Full-Time<br><br><strong>Workplace Type:</strong> Full-time<br><br><strong>Job ID:</strong> IJOB202673369<br><br><strong>Job Responsibilities<br><br></strong><ul><li>Design, install, commission, operate, and maintain industrial automation and control systems.</li><li>Troubleshoot PLC, SCADA, HMI, DCS, and other automated control systems.</li><li>Monitor and maintain automation equipment used in steel production and processing operations.</li><li>Diagnose electrical, instrumentation, and control-system faults and implement corrective actions.</li><li>Develop and modify PLC programs, control logic, and HMI/SCADA applications when required.</li><li>Perform preventive and corrective maintenance of automation systems and field instruments.</li><li>Coordinate with electrical, mechanical, instrumentation, and production teams to ensure smooth plant operations.</li><li>Analyze system alarms, process data, and equipment performance to improve reliability and productivity.</li><li>Ensure automation systems comply with technical specifications, safety procedures, and company standards.</li><li>Maintain technical documentation, maintenance records, system backups, and modification reports.<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> Experience: 5 years </li><li> Education: electrical &amp; electronic engineering </li><li> Skills: knowledge of industrial automation, knowledge of plc systems, industrial automation, knowledge of control systems, industrial engineering, scada systems, plc allen bradley, control systems design, production engineering, manufacturing engineering <br><br></li></ul><strong>Last Date of Application:</strong> 06 November 2026

<strong>Company Name:</strong> GREENLAND GROUP<br><br><strong>Location:</strong> Qatar<br><br><strong>Job Type:</strong> Full-Time<br><br><strong>Workplace Type<br><br></strong><strong>Job ID:</strong> IJOB202673357<br><br><ul><li>Coordinate daily steel production activities to ensure smooth and continuous operations.</li><li>Monitor production schedules, targets, manpower, materials, and equipment availability.</li><li>Coordinate with production, maintenance, quality control, electrical, and mechanical teams.</li><li>Follow up on production progress and report operational issues to the Production Supervisor/Manager.</li><li>Monitor production processes and ensure work is carried out according to approved procedures and standards.</li><li>Assist in identifying production delays, equipment breakdowns, and process-related problems.</li><li>Maintain production records, shift reports, and other operational documentation.</li><li>Ensure proper coordination between control room and field operations.</li><li>Support implementation of production plans and help achieve daily/monthly production targets.</li><li>Ensure compliance with company safety, quality, and environmental procedures.</li><li>Assist in improving production efficiency, minimizing downtime, and reducing operational losses.<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> Experience: 3 years </li><li> Education: </li><li> Skills: production engineering, production coordination, production management, daily operations management, manufacturing engineering, maintenance engineering, operation management, daily operations, manufacturing operations management <br><br></li></ul><strong>Last Date of Application:</strong> 06 November 2026

<strong>Company Name:</strong> GREENLAND GROUP<br><br><strong>Location:</strong> Qatar<br><br><strong>Job Type:</strong> Full-Time<br><br><strong>Workplace Type<br><br></strong><strong>Job ID:</strong> IJOB202673363<br><br><strong>Job Responsibilities<br><br></strong><ul><li>Install, inspect, calibrate, maintain, and troubleshoot industrial instrumentation and control systems.</li><li>Perform maintenance and calibration of pressure, temperature, flow, level, and other process instruments.</li><li>Troubleshoot transmitters, control valves, sensors, switches, gauges, and instrument control loops.</li><li>Read and interpret P&amp;ID drawings, instrument loop diagrams, wiring diagrams, and technical specifications.</li><li>Carry out preventive and corrective maintenance of instrumentation equipment.</li><li>Perform instrument calibration using standard testing and calibration equipment.</li><li>Check and maintain pneumatic and electronic control systems.</li><li>Assist in commissioning, testing, and loop checking of new instruments and control systems.</li><li>Identify instrument faults and carry out necessary repairs or replacements.</li><li>Maintain calibration records, maintenance reports, and technical documentation.</li><li>Follow all plant safety procedures and ensure work is completed according to company standards.<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> Experience: 3 years </li><li> Education: </li><li> Skills: knowledge of industrial automation, instrumentation skills, industrial engineering, maintenance engineering, field technicians, industrialengineering, mechanical maintenance, industrial automation <br><br></li></ul><strong>Last Date of Application:</strong> 06 November 2026

<ul><li><p>Collect vehicle keys and arrange vehicles for inspection across various inspection sites for Toyota, Lexus, and non-Toyota vehicles. </p></li><li><p>Support inspectors in conducting vehicle inspections using manual checks and computerized diagnostic tools. </p></li><li><p>Assess vehicle condition including mechanical systems (engine, transmission), body condition (denting, paint), chassis, safety components, and other functional parts. </p></li><li><p>Perform test drives when required to identify performance issues and recommend necessary repairs or corrective actions. </p></li><li><p>Capture photographic evidence of vehicle damages, defects, or missing parts as part of inspection documentation. </p></li><li><p>Check vehicle accident history using systems such as Metrash and support preparation of accurate inspection reports. </p></li><li><p>Prepare and submit timely inspection reports based on findings and present them to the supervisor. </p></li><li><p>Support continuous improvement initiatives by adhering to updated inspection standards and best practices</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>2–5 years of experience in vehicle inspection, automotive service, or a related field.</p></li><li><p>Experience inspecting Toyota, Lexus, or multi-brand vehicles is preferred.</p></li><li><p>Hands-on experience using computerized diagnostic tools and vehicle inspection equipment.</p></li><li><p>Experience in preparing inspection reports and documenting vehicle conditions.</p></li><li><p>Experience conducting road tests and evaluating vehicle performance.</p></li></ol>

<strong>Primary Purpose Of The Job<br><br></strong>The Oil Spill Responder plays a critical role to ensure the response readiness in base is appropriately maintained at the highest standard. The job holder is required to support the Operations Supervisor in managing day to day activities including contractor management, HSE compliance/implementation and engagement with another QatarEnergy departments or with the external stakeholders.<br><br>The Oil Spill Responder is also required to lead an efficient and timely response if hydrocarbon spills occurred within the State of Qatar or in other locations as directed by the Division. He/she will perform response operations aligned with international best practices and according to national legislations.<br><br><strong>Required Experience And Skills<br><br></strong><ul><li>At least 8 years’ experience in oil spill response organisations or offshore/marine oil and gas industry.</li><li>Excellent written and spoken English (minimum QP English Level 4).</li><li>Excellent knowledge of spill response techniques and strategies.</li><li>Must have valid lifting and slinging certificate.</li><li>Must have valid forklift license.<br><br></li></ul><strong>Educational Qualifications<br><br></strong><ul><li>Diploma in Mechanical, Marine or Environmental Disciplines.</li><li>Valid IMO level 2 training certificate.</li><li>Must hold commercial boat operating certificate.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Plan, Direct, Coordinate, Accomplish and Monitor Major Rotating Equipment’s Engineering, Overhaul and Inspection activities within Mesaieed operations. Provide specialized Technical and Engineering support to plant operations and engineers to maintain equipment’s as per applicable international standards. Stay abreast of state-of-the art developments in the rotating equipment discipline and propose state-of-the art techniques, equipment and materials, which will benefit the company and its operations.</p><br> <br><strong>Required Experience and Skills</strong><br><p>Good knowledge of International ISO/API standards. All-round knowledge of Engineering, Maintenance, Troubleshooting and Root cause failure analysis of rotating equipment’s.</p><br><p>Effective presentation, communication, Technical reports writing, Team player and ability to guide and motivate subordinates, Ability to handle contractors, Able to operating computer applications including Microsoft Office, Lotus Notes and SAP, and Proficient in English language.</p><br> <br><strong>Educational Qualifications</strong><br><p>Bachelor’s University Degree in Mechanical Engineering. Engineering and Overhaul/inspection training courses related to Heavy duty Gas Two shaft gas turbines, centrifugal process gas compressors, expanders, heavy duty gearboxes, torque convertors and large cooling water pumps.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Responsibilities<br></span><ul><li><p><span>Perform fusion and mechanical splicing of fiber optic cables.</span><br></p><br></li><li><p><span>Strip, clean, and prepare fiber/copper cables for splicing.</span><br></p><br></li><li><p><span>Use OTDR, power meters, and other tools to test and verify signal integrity.</span><br></p><br></li><li><p><span>Maintain splicing records, test results, and as-built diagrams.</span><br></p><br></li><li><p><span>Follow industry safety standards when handling cables and equipment.</span><br></p><br></li><li><p><span>Work in outdoor environments, manholes, and telecom cabinets to splice and connect cables.</span><br></p><br></li><li><p><span>Perform splicing and testing of submarine composite cable, LSZH, armored cable, loose tube cable using Fusion splicing machine, Ribbon splicing machine.</span><br></p><br></li><li><p><span>Familiar with fiber optics tools and equipment's OTDR, Source/Power meter VFL, Talk Set.</span><br></p><br></li></ul><br><span>RequirementsRequirements<br></span><ul><li><p><span>Diploma/Certificate in Telecommunications, Electronics, or related field.</span><br></p><br></li><li><p><span>Proven experience in <b>fiber optic splicing</b> and <b>copper cable splicing</b>.</span><br></p><br></li><li><p><span>Knowledge of <b>network layouts, color codes, and cable management systems</b>.</span><br></p><br></li><li><p><span>Ability to read and interpret technical drawings and splice diagrams.</span><br></p><br></li><li><p><span>Familiarity with <b>OTDR testing, light source, and power meter usage</b>.</span><br></p><br></li></ul>Interested candidates can send their CV &amp; CERTIFICATES<br><br>Contact: +974 3117 1747<br><br>Email: kisivuli@madre-me.com | resumes@madre-me.zohorecruitmail.com<br><br><br> </div>

<p><strong>We Are Hiring for MEP Procurement Engineer - Doha Qatar!</strong></p><br><p><strong>Job Summary</strong></p><p>Manage the procurement of MEP materials, equipment, and subcontractor services, ensuring cost-effective sourcing, quality compliance, and timely delivery to support project execution.</p><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Plan and execute procurement activities for MEP projects.</p></li><li><p>Source, evaluate, and negotiate with suppliers and subcontractors.</p></li><li><p>Review technical specifications, BOQs, and material submittals.</p></li><li><p>Issue purchase orders and monitor delivery schedules.</p></li><li><p>Coordinate with engineering and project teams to meet project milestones.</p></li><li><p>Ensure compliance with project specifications, company policies, and Qatar standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.</p></li><li><p>Minimum <strong>5 - 8 years</strong> of MEP procurement experience in construction projects.</p></li><li><p>Experience in the Qatar/GCC construction market is highly preferred.</p></li><li><p>Strong knowledge of HVAC, Electrical, Plumbing, Fire Fighting, and ELV systems.</p></li><li><p>Excellent negotiation, analytical, and communication skills.</p></li><li><p>Experience with ERP systems (SAP, Oracle, Microsoft Dynamics, or similar).</p></li></ul><p><strong>What We Offer</strong></p><p>✔ Competitive Salary Package<br>✔ Career Growth Opportunities<br>✔ Professional & Supportive Work Environment</p><br><p>Only shortlisted candidates will be contacted. Thank you!</p>

<ul><li><p>Collect vehicle keys and arrange vehicles for inspection across various inspection sites for Toyota, Lexus, and non-Toyota vehicles. </p></li><li><p>Support inspectors in conducting vehicle inspections using manual checks and computerized diagnostic tools. </p></li><li><p>Assess vehicle condition including mechanical systems (engine, transmission), body condition (denting, paint), chassis, safety components, and other functional parts. </p></li><li><p>Perform test drives when required to identify performance issues and recommend necessary repairs or corrective actions. </p></li><li><p>Capture photographic evidence of vehicle damages, defects, or missing parts as part of inspection documentation. </p></li><li><p>Check vehicle accident history using systems such as Metrash and support preparation of accurate inspection reports. </p></li><li><p>Prepare and submit timely inspection reports based on findings and present them to the supervisor. </p></li><li><p>Support continuous improvement initiatives by adhering to updated inspection standards and best practices</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>2–5 years of experience in vehicle inspection, automotive service, or a related field.</p></li><li><p>Experience inspecting Toyota, Lexus, or multi-brand vehicles is preferred.</p></li><li><p>Hands-on experience using computerized diagnostic tools and vehicle inspection equipment.</p></li><li><p>Experience in preparing inspection reports and documenting vehicle conditions.</p></li><li><p>Experience conducting road tests and evaluating vehicle performance.</p></li></ol>

The post holder will be an experienced and skilled mechanical technician and supervisor undertaking a range of detailed maintenance activities on the Typhoon aircraft or aircraft components.<br><br>The post holder requires an excellent understanding of the approved technical data set and is competent to supervise personnel carrying out maintenance instructions in accordance with the organisation’s regulatory framework.<br><br>Demonstrates a distinct ability to analyze and diagnose faults to aircraft systems, equipment and assemblies, follow diagnostic procedures and work effectively within a team. Provide guidance to less experienced team members in a diverse and dynamic operational environment<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Undertaking detailed maintenance, inspection and supervision activities on the Typhoon and its components. </li><li>Assuring work carried out has been completed in accordance with the work package using the relevant approved technical information. </li><li>Resolving faults and maintenance issues, including configuration management.</li><li>Undertaking and complete tasked maintenance &amp; diagnostic activities on the Typhoon aircraft or components which may include, as appropriate, aircraft ground handling, flight servicing, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test</li><li>Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately</li><li>Maintain personal task authorizations for working on aircraft or components</li><li>Ensuring that maintenance is undertaken to schedule and resolve any issues, escalate as required</li><li>Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance</li><li>Supervising the team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider program</li><li>Ensuring that staff are sufficiently competent and approved for the maintenance tasks allocated to them</li><li>Undertaking support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and</li><li>Functionally Mandated Procedures (FMP’s) (e.g. oversight checks, control of tooling / test equipment etc.)”</li><li>Provide guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information</li><li>Ability to scope and carry out independent and vital inspections</li><li>Maintaining a personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s logbooks as appropriate within your trade and skills boundaries. </li><li>If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission<br><br></li></ul><strong>Requirements<br><br></strong><ul><li>Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications.</li><li>Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (On a/c requirement)</li><li>Requires a broad and in-depth product knowledge/competency within own technical/subject area. </li><li>Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application</li><li>Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role.</li><li>Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. </li><li>Practical experience and expertise in the application of aviation safety standards and safe operating practices. A comprehensive knowledge of Expositions and Functionally Mandated Procedures Management training. PDR training / experience</li><li>Ensure personal compliance with the risk assessments, SHE policies and procedure</li><li>Typhoon Composite Flight Servicing</li><li>Typhoon Mechanical Trade ‘Q’ Course</li><li>Leadership- Foundation</li><li>Human Factors- Standard Course Specification</li><li>E&amp;PW Awareness- Standard Course Specification</li><li>ITAR Awareness- Standard Course Specification</li><li>IT Literate</li><li>Fire Training- Qatar GFx Specification</li></ul>

<p>The post holder will be an experienced and skilled mechanical technician and supervisor undertaking a range of detailed maintenance activities on the Typhoon aircraft or aircraft components. <br><br></p>The post holder requires an excellent understanding of the approved technical data set and is competent to supervise personnel carrying out maintenance instructions in accordance with the organisation’s regulatory framework.<br><br><strong>Key Responsibilities:<br></strong><ul> <li>Demonstrates a distinct ability to analyze and diagnose faults to aircraft systems, equipment and assemblies, follow diagnostic procedures and work effectively within a team. Provide guidance to less experienced team members in a diverse and dynamic operational environment. <br> </li> <li>Undertaking detailed maintenance, inspection and supervision activities on the Typhoon and its components. Assuring work carried out has been completed in accordance with the work package using the relevant approved technical information. Resolving faults and maintenance issues, including configuration management <br> </li> <li>Undertaking and complete tasked maintenance &amp; diagnostic activities on the Typhoon aircraft or components which may include, as appropriate, aircraft ground handling, flight servicing, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test <br> </li> <li>Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately <br> </li> <li>Maintain personal task authorizations for working on aircraft or components <br> </li> <li>Ensuring that maintenance is undertaken to schedule and resolve any issues, escalate as required <br> </li> <li>Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance <br> </li> <li>Supervising the team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider program <br> </li> <li>Ensuring that staff are sufficiently competent and approved for the maintenance tasks allocated to them <br> Undertaking support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and </li> <li>Functionally Mandated Procedures (FMP’s) (e.g. oversight checks, control of tooling / test equipment etc.). <br> </li> <li>Provide guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information <br> </li> <li>Ability to scope and carry out independent and vital inspections <br> </li> <li>Maintaining a personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s logbooks as appropriate within your trade and skills boundaries. <br> </li> <li>If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission <br> <br><br><br></li></ul>Requirements<br><br><ul> <li>Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications. <br> </li> <li>Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. <br> </li> <li>Aircraft platform training (On a/c requirement) <br> </li> <li>Requires a broad and in-depth product knowledge/competency within own technical/subject area. <br> </li> <li>Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application <br> </li> <li>Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. <br> </li> <li>Practical experience and expertise in the application of aviation safety standards and safe operating practices. <br> </li> <li>A comprehensive knowledge of Expositions and Functionally Mandated Procedures Management training. <br> </li> <li>PDR training / experience <br> </li> <li>Ensure personal compliance with the risk assessments, SHE policies and procedures <br> </li> <li>Typhoon Composite Flight Servicing <br> </li> <li>Typhoon Mechanical Trade ‘Q’ Course <br> </li> <li>Leadership- Foundation <br> </li> <li>Human Factors- Standard Course Specification <br> </li> <li>E&amp;PW Awareness- Standard Course Specification <br> </li> <li>ITAR Awareness- Standard Course Specification</li></ul>

The post<br><br>holder will be an experienced and skilled mechanical technician and supervisor undertaking<br><br>a range of detailed maintenance activities on the Typhoon aircraft or aircraft<br><br>components.<br><br>The post holder<br><br>requires an excellent understanding of the approved technical data set and is<br><br>competent to supervise personnel carrying out maintenance instructions in<br><br>accordance with the organisation’s regulatory framework.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Demonstrates a distinct ability to analyze and diagnose faults to aircraft systems, equipment and assemblies, follow diagnostic procedures and work effectively within a team. Provide guidance to less experienced team members in a diverse and dynamic operational environment.</li><li>Undertaking detailed maintenance, inspection and supervision activities on the Typhoon and its components. Assuring work carried out has been completed in accordance with the work package using the relevant approved technical information. Resolving faults and maintenance issues, including configuration management</li><li>Undertaking and complete tasked maintenance &amp; diagnostic activities on the Typhoon aircraft or components which may include, as appropriate, aircraft ground handling, flight servicing, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test</li><li>Demonstrate a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately</li><li>Maintain personal task authorizations for working on aircraft or components</li><li>Ensuring that maintenance is undertaken to schedule and resolve any issues, escalate as required</li><li>Undertaking fault evaluation and raise ad hoc work cards for ‘found faults’ during maintenance</li><li>Supervising the team to ensure that maintenance is undertaken to schedule and highlight any issues, escalate as required. Report on any impact to the wider program</li><li>Ensuring that staff are sufficiently competent and approved for the maintenance tasks allocated to them Undertaking support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and</li><li>Functionally Mandated Procedures (FMP’s) (e.g. oversight checks, control of tooling / test equipment etc.).</li><li>Provide guidance and leadership to the team. Develops team members using formal assessment processes, e.g. PDR’s, supports and sponsors training requests including ‘on the job training’. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information</li><li>Ability to scope and carry out independent and vital inspections</li><li>Maintaining a personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel’s logbooks as appropriate within your trade and skills boundaries. </li><li>If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission<br><br></li></ul><strong>Requirements<br><br></strong><ul><li>Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or Military equivalent apprenticeship / qualifications.</li><li>Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent.</li><li>Aircraft platform training (On a/c requirement)</li><li>Requires a broad and in-depth product knowledge/competency within own technical/subject area. </li><li>Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application</li><li>Experienced and competent leader at this level. Requires a minimum of 2 years working at Technician level prior to undertaking a Supervisor role. Demonstrating breadth of experience, currency &amp; recency via a Log Book capturing skills, knowledge and authorities for working on Aircraft type or in bays. </li><li>Practical experience and expertise in the application of aviation safety standards and safe operating practices. </li><li>A comprehensive knowledge of Expositions and Functionally Mandated Procedures Management training. </li><li>PDR training / experience</li><li>Ensure personal compliance with the risk assessments, SHE policies and procedures</li><li>Typhoon Composite Flight Servicing</li><li>Typhoon Mechanical Trade ‘Q’ Course</li><li>Leadership- Foundation</li><li>Human Factors- Standard Course Specification</li><li>E&amp;PW Awareness- Standard Course Specification</li><li>ITAR Awareness- Standard Course Specification</li></ul>

Other Full-Time On-Site 2 Openings<br><br>Chiller Technician<br><br>Doha<br><br> Posted 27 minutes ago<br><br>Login to Apply Save<br><br>Salary Range<br><br>QAR2,800 - QAR3,500 / month<br><br>Experience<br><br>3–6 years<br><br>Education<br><br>Diploma<br><br>Work Mode<br><br>On-Site<br><br>Role Overview & Description<br><br>A leading facilities management company is seeking a Chiller Technician to maintain, troubleshoot, and repair centrifugal, screw, and reciprocating chillers.<br><br>Key Requirements & Responsibilities<br><br>Diagnose equipment faults. Conduct preventive maintenance. Monitor system performance. Repair chiller components. Maintain chiller systems.<br><br>Required Skills & Expertise<br><br>Chiller maintenance Troubleshooting Reporting HVAC systems Mechanical Repairs<br><br>Education & Study Field<br><br>Diploma ITI / Vocational / Trade Certificate<br><br>Experience Required<br><br>3–6 years<br><br>Languages Required<br><br>English Arabic<br><br>Perks & Benefits<br><br> Visa Accommodation Transportation<br><br>Apply for this Position<br><br>Login as a jobseeker to apply.<br><br>Login to Apply Register Account<br><br>Job Snapshot<br><br> Job Code #JOB-4211 Category Other Employment Full-Time Work Mode On-Site Shift Type Day Shift Deadline Nov 21, 2026 Country Qatar State / Province Doha<br><br>Save Job<br><br>Similar Openings<br><br>Diesel Mechanic<br><br>Jeddah SAR2,800 - 4,000<br><br>Auto Electrician<br><br>Dubai AED2,500 - 3,800<br><br>Solar Technician<br><br>Ibri OMR250 - 400

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><br></p><p>Position Responsibilities:</p><ul><li>Performs AH-64E aircraft maintenance tasks and performs air crew-member duties as required using the QAF specific AH-64E IETM, AH-64E Operators Manual, AH-64E Maintenance Test Flight Manual, and AH-64E Check List Manual.</li><li>Removes and installs aircraft systems and subsystem assemblies and components including engines, rotors, gearboxes, transmissions, mechanical flight controls and their components.</li><li>Services and lubricates aircraft systems, subsystems, and components.</li><li>Prepares aircraft for inspections and maintenance checks.</li><li>Performs scheduled and unscheduled aircraft maintenance actions.</li><li>Uses common measuring tools, precision measuring gauges and alignment fixtures.</li><li>Performs aircraft and related components routine and special inspections.</li><li>Performs maintenance operational checks.</li><li>Diagnoses and solves problems aircraft subsystems using special tools and equipment as required.</li><li>Uses and performs operator maintenance on tools, special tools, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</li><li>Prepares aircraft maintenance forms and records.</li><li>Provide OJT, coaching, and mentorship to the QAF personnel in the use of all applicable technical publications, tools, test equipment, AGSE, PGSE, and special equipment applicable to the subject area of aircraft maintenance, enabling them to become effective AH-64E aircraft mechanics.</li><li>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to accurate failures or implement changes.</li><li>Coordinates assembly, disassembly or overhaul.</li><li>Configures aerospace vehicles and bench test equipment.</li><li>Fixes complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</li><li>Performs validation/verification testing of systems and components.</li><li>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</li><li>Inspects components and verifies repairs for flight worthiness requirements.</li><li>Coordinates training.</li><li>Works under general direction.</li><li>Travel on short notice.</li><li>Travel both domestically and internationally.</li></ul><p>Basic Qualifications (Required Skills/Experience):</p><ul><li>6+ years of experience with the AH-64D, or AH-64E, aircraft.</li><li>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) and with Enhanced Logbook Automation System (ELAS) entries.</li><li>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft maintenance course or civilian equivalent training.</li><li>Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or their designated representative and/or the GFR as substitute.</li></ul><p>Preferred Qualifications (Desired Skills/Experience):</p><ul><li>Possess Airframe and Powerplant license or equivalent.</li><li>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</li><li>Prior experience or qualified in another aviation maintenance field.</li><li>Prior experience working in the Southwest Asia/desert region.</li></ul><p>This requisition is for an international, locally hired position in Al-Udeid, Qatar. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Qatari law. Employment is subject to the candidate's ability to satisfy all Qatari labor and immigration formalities.</p><p>Relocation: This position offers relocation based on candidate eligibility.</p><p>Security Clearance: This position does not require a Security Clearance.</p><p>Visa Sponsorship: Employer willing to sponsor applicants for employment visa status.</p><p>Contingent Upon Award Program</p><p>This position is not contingent upon program award</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>6+ years of experience with the AH-64D, or AH-64E, aircraft.</p><p>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) and with Enhanced Logbook Automation System (ELAS) entries.</p><p>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft maintenance course or civilian equivalent training.</p><p>Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or their designated representative and/or the GFR as substitute.</p><p>Possess Airframe and Powerplant license or equivalent.</p><p>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><p>Prior experience or qualified in another aviation maintenance field.</p><p>Prior experience working in the Southwest Asia/desert region.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary <br> <p>The incumbent is responsible for assisting Safety team for implementing departmental safety program; makes inspections and conducts safety training; and performs related duties as required. The incumbent is also responsible for managing the operation of safety systems, to ensure that safety systems, procedures and other guidelines are implemented, and standards fully comply with the requirements to ensure safety of the entire Group’s International assets, properties and staff.</p><br> <br> <br><br> Main Responsibilities <br> <p>A. Shareholder &amp; Financial: - Implements KPI’s and best practices for Safety. - Promote cost consciousness and efficiency and enhance productivity, to minimise cost, avoid waste, and optimise benefits for the bank. - Act within the limits of the powers delegated to the incumbent. - Ensure that all QNB Group premises are safe. </p><br><p>B. Customer (Internal &amp; External): - Manage the provision of safety services to all QNB departments, as and when required. - Co-ordinate and manage the relationship with external safety companies. - Anticipate customers’ needs and continuously revisit safety procedures to ensure offering the best standards and leading practice. - Encourage and guide people in exceeding set standards. - Identify emerging customer service problems/ opportunities and provide workable solutions. - Assist customers in all their queries on Bank’s product and seek solution to their requests. - Maintain activities in accordance with Service Level Agreements (SLAs) with internal departments/units to achieve improvements in turn-around time. - Build and maintain strong/effective relationships with related departments/units to achieve the Group’s objectives. - Provide timely/accurate data to external/internal Auditors, Compliance, Financial Control and Risk when required. </p><br><p>C. Internal (Processes, Products, Regulatory): - Supervise routine, scheduled and emergency safety of all equipment &amp; electrical/ mechanical systems, which are necessary for efficient QNB operations. - Prepare the schedule of tasks for the safety team for day-to-day. - Prepare safety and quality assurance checklist and schedule of safety visits for bank premises. - Prepare the safety program for each year (routine) for all electrical and mechanical equipment in all the Group premises. - Coordinate with the Purchasing Department for the purchase and requisition of any safety equipment, parts as required. - Receive higher approval of works where required and co-ordinate with the Purchasing Department to obtain quotes. - Verify &amp; ensure the record of all security equipment delivered to Branches and monitor the maintenance cost accordingly. - Ensure compliance with all QNB policies and procedures. - Scrutinize all invoices for routine safety works, equipment &amp; other maintenance works and forward them to concerned parties. - Ensure that all safety requirements are maintained. - Co-ordinate and monitor maintenance performed where external service providers are used. - Ensure implementation &amp; compliance of safety policies and procedures in all QNB Group (International premises). - Review &amp; provide guidance /assistance as required on safety systems, and system maintenance contracts for International Branches &amp; subsidiaries - Coordinate with Branches/offices to ensure compliance of safety procedures, periodic maintenance of security equipment, etc.. - Conduct initial investigation of offenses and report findings. - Conduct safety checks to ensure safety equipment are functional (such as fire alarm &amp; firefighting systems etc.) - Collect requirements, prepare design for safety layout, obtain quotes and ensure implementation of integrated security system for new Branches.- Review &amp; provide guidance /assistance as required on safety systems, and system maintenance contracts for International Branches &amp; subsidiaries - Coordinate with Branches/offices to ensure compliance of safety procedures, periodic maintenance of safety equipment, etc... - Coordinate with safety maintenance company on safety issues and to derive appropriate solutions. - Conduct initial investigation of offenses and report findings to the AVP Safety for International Branches and subsidiaries. - Follow up and assist if required, in conducting Fire Drill and safety check-ups to ensure the premises &amp; staff are well aware of Evacuation procedures &amp; safety polices. - Provide guidance and training to safety personnel in International branches on the use of preventive safety equipment.</p><br> <br> <br><br> Education and Experience Requirements <br> <p>- University graduate with Safety/Security certifications. </p><br><p>- At least 8 years’ of relevant experience, preferably within a highly rated international bank.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Field Service Engineer - Centrifugal Compressor</b><br>&nbsp;</p><br><p><b>Are you a Mechanical Field Service Engineer looking for an interesting and inspiring opportunity?</b><br>&nbsp;</p><br><p><b>Would you like to be part of our Turbomachinery Process Solutions Product Line?</b><br>&nbsp;</p><br><p><b>Join our Industrial and Energy Technology</b> <b>Team!</b></p><br><p>Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation teamwork to improve the quality of our Engineering processes.</p><br><p><b>Partner with the best</b><br>&nbsp;</p><br><p>As a Field Service Engineer - Centrifugal Compressors, you will be coordinating and overseeing work at the field site, providing quality service to the customer. In addition, your Job role may include providing the planning necessary for the job including instructions to the crew and equipment.<br>&nbsp;</p><br><p>As a Field Service Engineer - Centrifugal Compressor, you will be responsible for</p><br><ul><li><p>Providing technical advice and support to clients and craft labour in the installation, commissioning and maintenance of Baker Hughes-supplied Centrifugal Compressors.</p><br></li><li><p>Unloading and Inspection of the Centrifugal Compressor &amp; its major auxiliaries at the installation site and their placement on the foundation.</p><br></li><li><p>Improving Geometric dimensional check of foundation, equipment and auxiliary skids positioning, levelling, and alignment</p><br></li><li><p>Performing Installation, commissioning &amp; Startup of various types of Centrifugal Compressors MCL, BCL, PCL, and SRL supplied by Baker Hughes at customer sites.</p><br></li><li><p>Performing minor &amp; major inspections of Centrifugal Compressors. Involving assembly, disassembly, checking and adjusting clearances evaluating wear and damage state of Couplings, lubricated-tooth, and dry-elastic types, thrust bearings and journal bearings of various kinds, gas seals, labyrinth and honeycomb types, Oil seals, gauged floating rings types, Dry gas seals or oil mechanical seals, Labyrinth or honeycomb inner seals, Diaphragms or diaphragms bundle and volutes.</p><br></li></ul><p><br><b>Fuel your passion</b><br>&nbsp;</p><br><p>To be successful in this role you will:<br>&nbsp;</p><br><ul><li><p>Have a bachelor’s in engineering/full-time 3 years technical diploma with 5+ years of relevant industry experience.</p><br></li><li><p>Have working experience in Rotating equipment in the Field at Customer Sites.</p><br></li><li><p>Have excellent Functional/Technical, Customer Focus, Communication, Interpersonal, and Team working skills.</p><br></li><li><p>Have prior experience in Installation and/or Maintenance activities of Centrifugal Compressors in the Field at Customer Sites</p><br></li></ul><p><br><b>Work in a way that works for you</b><br>&nbsp;</p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:<br>&nbsp;</p><br><ul><li><p>When assignments are complete, in general, you won't be required to visit the office, however, you can operate from Home and perform basic tasks like completing previous assignment reports, mobilization-related aspects, etc before you take on your next projects. The company shall ensure a work-life balance for the individual.</p><br></li></ul><p><br><b>Working with us</b><br>&nbsp;</p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;</p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br>&nbsp;</p><br><ul><li><p>Contemporary work-life balance policies and well-being activities</p><br></li><li><p>Comprehensive private medical care options</p><br></li><li><p>The safety net of life insurance and disability programs</p><br></li><li><p>Tailored financial programs</p><br></li><li><p>Additional elected or voluntary benefits</p><br></li></ul>The Baker Hughes internal title for this role is: Field Specialist III - SVS - CC </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong><u>JOB TITLE:</u></strong></span><span><strong><u>Project Manager</u></strong></span></p><br><p><span><strong><u>Role Purpose:</u></strong></span></p><br><p><span>Under the direction of the Facility and Support Services (F&amp;SS) Director provide oversight to all hospital facility projects. This includes planning, organizing manpower for project activities, implementation, project control, and evaluation. Lead projects as needed for Hospital Operations and collaborate with other departments as instructed by the F&amp;SS Director. Responsible for managing the processes and procedures that form the facility project program for the hospital. Responsible for the Hospital engineering equipment management and inventory.</span></p><br><p><span><strong><u>Job Responsibilities: - (Including but not limited to):</u></strong></span></p><br><ul> <li><span>Plan and deliver project activities related to engineering scope of work.</span></li> <li><span>Manage projects by determining project specifications, design, end user requirements, and performance standards.</span></li> <li><span>Monitor on-going activities, review the project schedule, and revise the schedule as required.</span></li> <li><span>Organize and arrange all manpower with appropriate skills necessary to carry out all project activities.</span></li> <li><span>Manage project contractors according to the established policies and practices of the Hospital and the parent company policies.</span></li> <li><span>Manages and assigns tasks to engineering staff and contractors.</span></li> <li><span>Supervise and approve contractor’s completed jobs and other subcontractor’s jobs.</span></li> <li><span>Communicate technical information to non-technical stakeholders. Collaborate with other team leaders and departments.</span></li> <li><span>Execute the project according to the project plan. Monitor the progress of the project and adjust as necessary to ensure the successful completion of the project.</span></li> <li><span>Establish a communication schedule to update stakeholders including appropriate staff within the hospital on the progress of the project, prepare progress reports for senior management.</span></li> <li><span>Review the quality of the work completed with the project team on a regular basis to ensure that it meets the project standards.&nbsp;</span></li> <li><span>Strive to improve efficiency and sustainability of processes and product designs, and to reduce waste. Write progress reports on the project for senior management. Monitor all budgeted project expenditures.</span></li> <li><span>Helps to create and oversee project budgets and engages in cost management strategies.</span></li> <li><span>Maintains safe and clean working environment by enforcing procedures, rules, and regulations.</span></li> <li><span>Ensure that the project deliverables are on time, within budget and at the required level of quality. Evaluate the outcomes of the project as established during the planning phase. Assures that processes meet quality and safety compliance guidelines.</span></li> <li><span>Manage the operation of the Hospital Engineering including buildings, equipment, firefighting equipment, and other services as required.&nbsp;</span></li> <li><span>Responsible of hospital plants, chillers, HVAC systems, civil works, mechanical jobs, electrical jobs, plumbing, carpentry, etc.</span></li> <li><span>Management, Monitoring and Maintenance of all Hospital Engineering Equipment.</span></li> <li><span>Scheduling equipment periodic preventative maintenance (PPM) and corrective maintenance on hospital engineering equipment.</span></li> <li><span>Manage equipment Service Contracts, warranty compliance and department SLA’s. Develop, review and amend policies and procedures for the Hospital engineering section.&nbsp;</span></li> <li><span>Prepare technical specifications, tender review, and evaluation for the purchase of new engineering equipment and projects.</span></li> <li><span>Commissioning and installation of newly purchased hospital engineering equipment.&nbsp;</span></li> <li><span>Develop annual budgets: operating, capital, and manpower for the section. Liaise with finance to finalize annual budgets.&nbsp;</span></li> <li><span>Produces weekly, monthly, and annual reports for F&amp;SS Director.</span></li> <li><span>Assume or accept any other responsibilities as assigned by the direct supervisor within the position role and responsibility.</span></li></ul><p><span><strong><u>Job Specific Skills: -</u></strong></span></p><br><p><span>Bachelor’s Engineering degree in Mechanical, Civil, Electrical &amp; or any other related field.&nbsp;Master’s degree is preferable. Certification in Facility Management or Project Management is ideal. Minimum experience of 6 to 8 years, in which 2-3 years should be in a similar position /responsibility, preferably in a similar industry. Demonstrated managerial, supervisory, budgetary and estimation skills for project activities and implementation.</span> K<span>nowledge of equipment procurement processes including specification writing and tender analysis. Knowledge and experience in the management of a Hospital Regulation and Equipment service to an international standard. Proficiency using presentation software to explain complex information to non-technical management personnel and other stakeholders. Experience using computer-aided design (CAD) platforms. Professionally groomed to project a positive image. Desire to embrace a culture of excellence, collaboration, and communication. High proficiency in English language is mandatory. Arabic will be a definitive advantage.</span></p><br><br> </div>