Security Camera Watch Jobs in Qatar

JOB PURPOSE / OBJECTIVEManage and ensure the successful execution of projects. Primary responsibility is to oversee and implement project management processes, including estimation, planning, scheduling, budgeting, monitoring, and reporting to effectively control project progress and resources.<br>KEY ACCOUNTABILITIESProject Planning & Scheduling Collaborate with project managers, Project engineers and stakeholders to develop detailed project plans, including defining project goals, scope, objectives, deliverables, and milestones. Support the planning engineers to develop project schedules. This involves breaking down project activities, sequencing them, and estimating their durations to establish a timeline for project execution. Evaluate and endorse the planning package documents submitted by contractors. Participate in the kick-off and regular review meetings with contractors to evaluate the progress, address the issues and propose necessary actions. Review and endorse the updated schedule submitted by contractors for progress verification. Support the planning engineer to monitor the critical path during project execution to ensure that necessary actions are taken at the right time to recover the project in case of delay. Control and monitor the resources required for the project, including manpower, equipment, and materials, to ensure that the project is executed as per the schedule through all project phases. Conduct regular site visits to evaluate and control the project progress versus the original schedule and address any variances and problems and propose remedial actions.<br>Project Cost and Data Analysis Work closely with Projects estimators, project managers, project engineers and other stakeholders to support estimate project costs, including labour, materials, equipment, and other expenses. Responsible for developing and managing the projects budgets, tracking, and monitoring costs throughout the project's lifecycle. Responsible to keep the projects budget forecast updated throughout the project's lifecycle. Prepare the yearly & quarterly budget for projects. Responsible for developing and monitoring the department budget. Manage and control projects’ costs, including forecasting, and spend tracking and work closely with project engineers and other stakeholders to ensure that budgets are met as per the planned WBS and cost overruns are identified and addressed. Analyse project performance data to identify trends, variances, and potential areas for improvement and use this information to make recommendations to Project managers, project engineers and other stakeholders. Update the individual master cost control sheet for Major Projects and keep their financial data accurate through all project phases. Review of projects invoices and validate the progress. Analyse EOT (Extension of Time) claims and change order and assess their impact on schedule. Support Project managers, project engineers and other stakeholders to identify potential risks and develop contingency plans to mitigate them. Monitor the project for any unforeseen risks and propose corrective actions if necessary. Undertake any other ad-hoc duties as required.<br>Project Controls & Analysis Monitor and control project progress by using various tools and techniques to collect and analyse data, identifying potential risks and deviations from the project plan. This involves providing regular project status updates, generating reports, and recommending corrective actions when necessary. Identify project resource requirements, such as personnel, equipment, and materials, and coordinating with relevant teams to ensure their availability by monitor resource utilization, optimize resource allocations, and manage any changes or conflicts. Implement monitoring systems and tools to track project progress against the project plan, schedule, and budget. This includes collecting data, analysing project performance, identifying deviations or risks, and recommending corrective actions to keep the project on track. Collaborate with project teams and stakeholders to identify potential risks and develop risk mitigation strategies by monitoring and assessing risk impacts on project objectives and work with stakeholders to implement risk response measures. Assess and manage changes to the project scope, schedule, and budget. This involves evaluating change requests, analysing their impact, and making recommendations for approval or alternative solutions. Implement quality control processes to ensure that project deliverables meet quality standards and client expectations. Identify lessons learned from projects and recommending improvements for future projects. Manage and control of IM/PS modules in SAP S4 Hana through all project phases and from creating the Investment Program until financial close out.<br>Policies, Systems, Processes and Procedures Identify the opportunities for the continuous improvement of Projects systems, policies, processes, and practices. Develop and enhance any procedures and guidelines related to Project Controls whenever is requested<br>Quality, Health, Security, Safety and Environment Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high-quality products/services. Reporting Ensure that all relevant reports are prepared timely and accurately, and meet the Department’s requirements, policies, and standards. Provide regular project status updates to project managers, projects engineer, stakeholders, and senior management through reports, dashboards, and presentation. Support internal and external audits by representing projects and providing necessary documentation evidence. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.<br>QUALIFICATIONS & EXPERIENCEEducation Required : Bachelor’s Degree in Engineering. Preferred: Bachelor's Degree in Mechanical, Chemical, or Civil Engineering.<br>Experience Required : 5-7 years of experience as projects controls engineer in the Petrochemical or Oil & Gas Industry. Employee should have brown field construction experience.<br>Preferred : 7-10 years of experience as projects controls engineer in the petrochemicals industry.<br>Other Job Specific Requirements and/or Vocational Accreditations Third Party Certification (e.g. PMP, PMI, APM etc..) Hand on experience on costing tools/software Certificate of Cost Professional (CCP) Planning and Scheduling Professional Certificate (PSP) Advanced user of MS excels and other MS tools. Languages Required : English - proficient Preferred : Arabic - working knowledge

Role Description This is a full-time, on-site role for a Content Creator, based in Doha, Qatar. The Content Creator will be responsible for generating engaging and impactful content for websites, social media platforms, and marketing campaigns. Key duties include developing content strategies, writing and editing content, creating multimedia content, conducting market research, and collaborating with the marketing team to align content with brand goals. The role also involves monitoring content performance and optimizing based on analytics. Qualifications<br>Proficiency in Content Creation, including writing, storytelling, and multimedia production Skills in Content Strategy and market research to align messaging with audience needs Social Media Management, understanding of platforms, and content optimization Editing, proofreading, and attention to detail to ensure error-free, high-quality deliverables Knowledge of Digital Marketing, SEO, and content analytics Strong communication and collaboration skills, with the ability to work in a team environment Proficiency in relevant software and tools such as Adobe Creative Suite or Canva is a plus Bachelor's degree in Marketing, Communications, Journalism, or a related field is preferred. Proven experience in creating engaging social media content. Confident and comfortable appearing in front of the camera. Energetic, creative, and presentable personality.

Job Title-React Native Consultant Location: Qatar Experience: 10+ Years Notice Period: 30 Days Arabic Speakers Preferred<br>???? Role Responsibilities• Lead the development and modernization of enterprise mobile applications using React Native• Design scalable, secure and maintainable mobile application architecture• Develop reusable components and implement effective state management and navigation• Optimize application performance and user experience across i OS and Android• Integrate REST APIs, SDKs, authentication solutions and native modules• Implement mobile security, coding standards, testing and CI/CD best practices• Conduct code reviews and troubleshoot complex technical issues• Mentor developers and establish mobile development best practices• Collaborate with UX/UI, Backend, Architecture, Security and QA teams• Support application deployment to Apple App Store and Google Play Store<br>???? Key Requirements• 10+ years of overall software/mobile development experience• Strong hands-on experience with React Native• Strong knowledge of Type Script / Java Script• Strong experience in i OS and Android development• Experience delivering large-scale enterprise mobile applications• Banking/Fin Tech experience is highly preferred• Strong understanding of mobile architecture, performance optimization and security• Experience with CI/CD, testing and application deployment• Strong problem-solving, leadership and mentoring skills• Arabic language skills will be an added advantage<br>???? Ideal Candidate: A senior mobile technology expert who can independently drive application modernization while ensuring high performance, security, scalability and excellent user experience.

Job Title-React Native Consultant Location: Qatar Experience: 10+ Years Notice Period: 30 Days Arabic Speakers Preferred<br>???? Role Responsibilities• Lead the development and modernization of enterprise mobile applications using React Native• Design scalable, secure and maintainable mobile application architecture• Develop reusable components and implement effective state management and navigation• Optimize application performance and user experience across i OS and Android• Integrate REST APIs, SDKs, authentication solutions and native modules• Implement mobile security, coding standards, testing and CI/CD best practices• Conduct code reviews and troubleshoot complex technical issues• Mentor developers and establish mobile development best practices• Collaborate with UX/UI, Backend, Architecture, Security and QA teams• Support application deployment to Apple App Store and Google Play Store<br>???? Key Requirements• 10+ years of overall software/mobile development experience• Strong hands-on experience with React Native• Strong knowledge of Type Script / Java Script• Strong experience in i OS and Android development• Experience delivering large-scale enterprise mobile applications• Banking/Fin Tech experience is highly preferred• Strong understanding of mobile architecture, performance optimization and security• Experience with CI/CD, testing and application deployment• Strong problem-solving, leadership and mentoring skills• Arabic language skills will be an added advantage<br>???? Ideal Candidate: A senior mobile technology expert who can independently drive application modernization while ensuring high performance, security, scalability and excellent user experience.

<p>Perform inspections and quality surveillance of Electrical, Instrumentation, HVAC, and Cathodic Protection systems, including pipeline cathodic protection installations, throughout fabrication, installation, testing, commissioning, start-up, and handover phases.</p><p>Witness, verify, and document Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for Electrical, Instrumentation, HVAC, and Cathodic Protection equipment and systems to ensure compliance with approved drawings, project specifications, Inspection and Test Plans (ITPs), applicable international codes and standards, and client requirements</p><p>Inspect installation of transformers, switchgears, MCCs, distribution panels, UPS systems, cables, junction boxes, field instruments, control systems (PLC, DCS, SCADA), and associated equipment</p><p>Verify cable laying, cable routing, termination, glanding, earthing/grounding, lighting, and electrical equipment installation activities</p><p>Inspect instrumentation installations including impulse tubing, instrument hook-ups, control valves, transmitters, analyzers, junction boxes, and marshalling cabinets</p><p>Witness and monitor testing activities include insulation resistance testing, continuity testing, grounding measurements, loop checking, calibration, functional testing, and system acceptance tests</p><p>Verify material receiving inspections and ensure compliance of electrical and instrumentation equipment with approved specifications and material certifications</p><p>Review inspection records, test reports, calibration certificates, and quality documentation for completeness and compliance</p><p>Coordinate inspection activities with construction, commissioning, contractor, personnel to ensure timely execution and resolution of quality issues</p><p>Identify, document, and report non-conformities, and follow up corrective actions through close-out</p><p>Ensure measuring and test equipment are calibrated and suitable for use</p><p>Ensure inspection records are maintained and support the implementation of the Project Quality Management System and HSE requirements</p><p><strong>Desired Candidate Profile</strong></p><p>Electrical/Electronic/Instrumentation/Telecom degree and/or diploma with experience in quality Control in multi-discipline construction and commissioning environment. Preferably having formal training in QC and membership with recognized or other professional institutions</p><p>Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in QA/QC inspection experience in Electrical and Instrumentation works within Oil &amp; Gas, Petrochemical, or Industrial construction projects; GCC experience is preferred.</p><p>Preferred to have Hazardous Area knowledge and Compatibility of Ex-Inspection in Dangerous zones</p><p>Strong knowledge of installation, inspection, testing, and commissioning of electrical and instrumentation systems and equipment</p><p>Familiarity with applicable international standards and codes including IEC, IEEE, NEC, NFPA, and project specifications</p><p>Ability to work effectively in multidisciplinary and multicultural project environments while coordinating with contractors, vendors, and client representatives</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>The Role</b></p><p>You'll own shoots end to end: planning, shooting, editing, and delivering, across both stills and video. This is a hands-on generalist role in a small team — one day you're shooting a product set in the studio, the next a corporate film on location. You should be comfortable working independently and representing the studio in front of clients.</p><p><b>Responsibilities</b></p><ul><li>Plan and execute photo and video shoots in studio and on location (products, corporate, F&amp;B, events, real estate)</li><li>Edit and retouch stills (Lightroom, Photoshop) and cut, color, and deliver video (Premiere Pro or DaVinci Resolve)</li><li>Deliver client-ready assets on deadline in formats for web and social — including vertical video (Reels/TikTok)</li><li>Interpret client briefs, prepare shot lists, and direct talent and clients on set</li><li>Manage, maintain, and track studio equipment (cameras, lenses, lighting, grip)</li><li>Organize and archive raw files and final deliverables to a consistent structure</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements</b></p><ul><li>Commercial photography and/or videography experience — <b>portfolio is the primary filter</b></li><li>Proficient in Adobe Creative Cloud (Lightroom, Photoshop, Premiere Pro); DaVinci Resolve or After Effects a plus</li><li>Able to run smaller shoots solo, from setup to delivery</li><li>Based in Qatar with a transferable visa/NOC, or eligible to relocate</li><li>Fluent English required; Arabic a strong plus</li></ul><p><b>Nice to Have</b></p><ul><li>Drone operation with a valid Qatar CAA permit</li><li>Motion graphics or basic animation</li><li>Short-form social content experience (Reels, TikTok, YouTube Shorts)</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Site Inspector-Electrical <p><strong>Part 4. Job Content</strong></p><br> <p><strong>Role Objective: </strong>To provide electrical engineering support for the successful delivery of Design &amp; Build interior fit-out projects by reviewing electrical designs, supervising installation works, coordinating multidisciplinary interfaces, monitoring construction quality, and ensuring all electrical and ELV systems are designed, installed, tested and commissioned in accordance with project specifications, Company standards, requirements and applicable statutory regulations.</p><br> <p><strong>4.1 </strong><strong>Key Accountabilities</strong></p><br> <ul><li>Review electrical design drawings, single-line diagrams (SLDs), load calculations, lighting calculations, shop drawings, material submittals and method statements to ensure compliance with project specifications, Company requirements and applicable codes.</li><li>Supervise and inspect the installation of all electrical systems including power distribution, lighting systems, emergency lighting, small power, distribution boards, cable containment, wiring systems, earthing, lightning protection (where applicable) and associated electrical equipment.</li><li>Review and monitor the installation of ELV systems including structured cabling, data and voice networks, CCTV, access control, public address systems, intercom systems, IPTV, audio-visual systems, BMS interfaces and other low-current systems included within the project scope.</li><li>Coordinate electrical works with architectural, mechanical, fire protection and ICT disciplines to ensure proper integration and compliance with approved designs.</li><li>Review equipment selections and verify compliance with approved schedules, energy efficiency requirements and manufacturer recommendations.</li><li>Monitor construction progress, review inspection requests, identify technical issues, issue observations and non-conformance reports (NCRs), and verify corrective actions.</li><li>Witness testing and commissioning activities including insulation resistance tests, continuity tests, functional testing, emergency lighting testing, ELV system integration, power-on testing and final commissioning.</li><li>Review commissioning procedures, test reports, operation &amp; maintenance manuals and as-built documentation prior to project handover.</li><li>Participate in factory inspections, material inspections, mock-ups, site acceptance tests (SAT), integrated systems testing and final handover inspections.</li><li>Assist in reviewing contractor payment applications, variation proposals and claims related to electrical and ELV works.</li><li>Ensure all electrical and ELV installations comply with Qatar Construction Specifications (QCS), Qatar Civil Defense (QCD), Kahramaa regulations, IEC standards, NFPA requirements and other applicable international standards.</li><li>Maintain accurate project documentation including RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.<ol><li><strong>General Responsibilities in Quality, Environmental &amp; Occupational Health &amp; Safety Management Systems </strong><ol><li>Aware of the QHSE Management System.</li><li>Understand the importance of conformance to the QHSE Policy and procedures and to the requirements of QHSE management system.</li><li>Aware of the Customer Requirements (where relevant).</li><li>Aware of the Significant Environmental Aspects and Occupational Hazards / risk in this area of operation.</li><li>Understand the potential consequences of deviations from approved procedures, specifications and safety requirements.</li><li>Aware of current Objectives and Targets in this area and what is the current status.</li><li>Aware of mergency Preparedness &amp; Response.</li><li>Aware of Security Requirements, sexual exploitation and abuse or gender based violence.</li></ol></li></ol></li></ul> <p><strong>Part 5. Working Conditions &amp; Hazards</strong></p><br> <p><strong>CHOOSE ONE:</strong></p><br> <ul><li> Normal office facilities (own office with desk, access to telephone)</li><li> Some exposure to heat, cold, dirt, noise and rainy weather conditions; some time away from duty station, exposure to</li><li> outdoor conditions</li><li> Some exposure to severe disagreeable conditions noise moisture, dust, excessive temperature, considerable dirt.</li><li><strong>CHOOSE ONE:</strong></li><li> Very slight chance of accident or health hazard, usual office situation</li><li> Exposure to security threats and/or other injury could occur in the course of work. Minor accidents possible.</li><li> Job requires working with moving equipment that could inflict injuries; health hazards due to unsanitary conditions;</li><li> There is exposure to serious injuries through some hazardous circumstances involving handling of equipment; may cause </li><li> illness, incapacity and loss of time.</li><li> There is likelihood of frequent exposure to hazards or conditions may cause total disability or death. Requires constant use of</li></ul> <p> safety equipment.</p><br> <p><strong>Part 6. Job Requirement</strong></p><br> <p><strong>Educational Qualifications</strong></p><br> <ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Professional registration is preferred.</li><li>Certification in Testing &amp; Commissioning or Low Voltage Systems is an advantage.</li></ul> <p><strong>Experience</strong></p><br> <ul><li>Minimum 10 years of professional experience in electrical engineering, construction supervision or project management.</li><li>Minimum 5 years of experience in high-end commercial office fit-out projects.</li><li>Proven experience in Design &amp; Build projects.</li><li>Strong experience in electrical distribution systems, lighting, emergency power, ELV and ICT coordination.</li><li>Experience in testing and commissioning of electrical and low-current systems.</li><li>Experience in Qatar and familiarity with Qatar Construction Specifications (QCS), Kahramaa regulations, Qatar Civil Defense requirements and local authority approval procedures.</li></ul> <p><strong>Behavioral Competencies</strong></p><br> <p><strong>Technical Competencies</strong></p><br> <p>Leadership</p><br> <p>Communication Skills</p><br> <p>Planning and Organizing</p><br> <p>Analytical Thinking</p><br> <p>Problem Solving</p><br> <p>Attention to Detail</p><br> <p>Teamwork</p><br> <p>Decision Making</p><br> <p>Time Management</p><br> <p>Stakeholder Management</p><br> <p>Electrical Power Distribution</p><br> <p>Lighting Systems</p><br> <p>Emergency Lighting</p><br> <p>Small Power Systems</p><br> <p>Distribution Boards</p><br> <p>Cable Containment Systems</p><br> <p>Earthing &amp; Bonding</p><br> <p>Structured Cabling</p><br> <p>ICT Coordination</p><br> <p>CCTV Systems</p><br> <p>Access Control Systems</p><br> <p>Audio-Visual Systems</p><br> <p>Building Management System (BMS) Interfaces</p><br> <p>Fire Alarm System Coordination</p><br> <p>Shop Drawing Review</p><br> <p>Material Submittal Review</p><br> <p>Testing &amp; Commissioning</p><br> <p>QA/QC Procedures</p><br> <p>IEC Standards</p><br> <p>NFPA Standards</p><br> <p>Qatar Construction Specifications (QCS)</p><br> <p>Kahramaa Regulations</p><br> <p>AutoCAD</p><br> <p>Revit / BIM (preferred)</p><br> <p>Microsoft Office Suite</p><br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><b>REQUIREMENT</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FABRICATOR 57-63 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER MECHANICAL 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER OPERATION 41-45QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER PIPE 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FITTER VALVE 41-45 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MILLWRIGHT 44-48 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">2-3 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MILLWRIGHT TECHNICIAN 60-65 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">MACHINIST 2500-3000 QAR</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">HSE TECHNICIAN 55-60 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based on Client interview qualified. 3-5 years of experience in Oil and Gas industries or Plant Maintenance , Shutdowns</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">FIRE/HOLE WATCH 39-47 QAR / day</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Must be able to read, write and speak English. Educational qualifications : Diploma fire /Safety / IOSH /NEBOSH, Must have more than 03 years experience + Client test qualified</span></div></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><u><strong>Genetec</strong></u><strong>&nbsp;- Protect the everyday</strong></p><br><p>We are a global Canadian company with a broad solutions portfolio encompassing&nbsp;<strong>security</strong>, intelligence, and operations. We serve customers within various industries including transportation,&nbsp;<strong>education</strong>, and government. At Genetec we embrace open&nbsp;<strong>communication</strong>,&nbsp;<strong>creativity</strong>, and&nbsp;<strong>continuous learning</strong>&nbsp;to allow everyone to flourish in their own unique career paths.</p><br><p>Our network, of over&nbsp;<strong>2400</strong>&nbsp;people globally, is made up of&nbsp;<strong>diverse</strong>&nbsp;individuals who are&nbsp;<strong>passionate</strong>&nbsp;about their work and open to trying new ideas. We prioritize the&nbsp;<strong>success</strong>&nbsp;and&nbsp;<strong>well-being</strong>&nbsp;of our employees, proven by our 2022 Internal Engagement Survey results of&nbsp;<strong>4.4/5</strong>.</p><br><p><strong>Job description:</strong></p><br><p>The Sales Engineer Qatar collaborates closely with various teams, particularly the Sales team, Field Project Engineers, Pre-Sales Engineers, and Sales Networks, to position Genetec's solutions and products. They are the technical point of contact for customers and Sales teams.</p><br><p><strong>Roles and responsibilities:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Develop and maintain an in-depth knowledge of Genetec's software and hardware products.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Define the solutions best suited to the requirements of our customers and partners</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Develop and maintain excellent relationships with all stakeholders, customers and partners</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Present high-level demonstrations of our entire product range</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Provide technical support to sales teams in response to customer specifications</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work closely with the technical support team to ensure a seamless transition between the pre-sales and post-sales teams, and the successful implementation of our solutions.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in specialized security trade shows, exhibitions and seminars.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Write white papers and become a true expert on Genetec solutions</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Provide technical feedback from the field to upstream Product Management teams.</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Implement complex software solutions</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Travel 30-40% of the time</p><br>Requirements<p><u><strong>About you</strong></u></p><br><p><em>We welcome all qualified candidates, including those who may not meet every listed requirement. If you're excited about this role and believe you can make an impact, we’d love to hear from you.</em></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Engineering degree in electronics, computer science, electrical engineering or equivalent</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; At least 5 years' professional experience in roles requiring regular exchanges with customers or partners, if possible in a technological environment with links to the security field in Qatar. </p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Initial experience in a pre-sales role in an innovative IT or security company</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Excellent oral presentation skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Excellent analytical and incident resolution skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Knowledge of the security market</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Comfortable working in a multicultural and international environment</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience in the security field in the local region</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience as a security system installer or commissioner and as a system integrator.</p><br><p><strong>Key skills:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Customer orientation, commercial and interpersonal skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Analytical and complex problem-solving skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Work organization within project deadlines</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Positive attitude</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Sense of innovation</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Follow-through on objectives</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Oral and writing skills</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conviction and Influence</p><br><p><strong>Knowledge:</strong></p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Genetec product range</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Video and access control systems</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IP network systems and protocols</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Windows Operating Systems</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PC configuration</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MCSE and/or CCNA certification</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Oral presentation techniques</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Problem analysis and incident resolution</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Security market</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Professional level of Arabic and English. An additional language is an asset.</p><br> </div>

Date Posted:<br><br>2026-05-14<br><br>Country:<br><br>United States of America<br><br>Location:<br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2<br><br>Position Role Type:<br><br>Onsite<br><br>U. S. Citizen, U. S. Person, or Immigration Status Requirements: <br><br>The ability to obtain and maintain a U. S. government issued security clearance is required. U. S. citizenship is required, as only U. S. citizens are eligible for a security clearance<br><br>Security Clearance Type: <br><br>DoD Clearance: Secret<br><br>Security Clearance Status: <br><br>Active and existing security clearance required after day 1<br><br>Job Description<br><br>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggress ion. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.<br><br>What You Will Do:<br><br>The MIR will provide in depth system knowledge and field experience related to the theory of operation and troubleshooting skills required to resolve complex Patriot missile system Major End Items (MEI) electronic and mechanical problems. The SROC ensures that appropriate and accurate information on all equipment is reported to program leadership and the customer.<br><br>The MIR will provide day-to-day execution on the Qatar Depot Operations program as well as demonstrate the ability to perform depot level diagnostic, fault isolation, cleanup and repair capability for Patriot Weapon System MEIs.<br><br>The MIR must affect all electronic repairs on location with detailed system knowledge, the ability to use all of the hardware and software tools currently available to Organizational and Intermediate Maintenance.<br><br>The MIR also monitors work performed by subordinates to insure it meets or exceeds established quality standards.<br><br>Must be able to lift 50 lbs. and work in an extreme environment.<br><br>This position is located in Doha, Qatar.<br><br>Qualifications You Must Have:<br><br>Successful completion of a Patriot System Intermediate Maintenance Course for MOS 14E/27X/34S/94S/916A/918D or an equivalent course of instruction on a similar electronic system conducted by the military or the system contractor.<br><br>Bachelor’s degree or Associates Degree with 2 years of related experience or HS Diploma/GED with 4 years of related experience.<br><br>Demonstrated 4 years of field maintenance experience troubleshooting, fault isolation, repair, and functional verifications of the Patriot Air Defense system or similar electronic systems using maintenance diagnostics, unit self-tests, BITE, tools and available test equipment.<br><br>Demonstrated experience with Department of the Army Modification Work Order (DAMWO) installations, to include system integration and checkout.<br><br>Active and transferable U. S. government issued security clearance is required prior to start date. U. S. citizenship is required, as only U. S. citizens are eligible for a security clearance.<br><br>Qualifications We Prefer:<br><br>Above qualifications plus five (5) years Patriot Depot Forward maintenance experience.<br><br>Demonstrated experience with Raytheon Quality Control procedures.<br><br>Demonstrated experience of the Patriot refurbishment, modification, and Enhanced Deep Maintenance.<br><br>Previous experience in International Patriot FMS Programs with experience living and working in an overseas location.<br><br>Required Education:<br><br>Bachelor's degree in related field and at least 5 years of related experience. Experience can be substituted for educational requirements. Must have at least 10 years of related experience without a degree.<br><br>What We Offer:<br><br>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.<br><br>Additional Information:<br><br>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products<br><br>#Patriot<br><br>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.<br><br>The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U. S.-based role. If the successful candidate resides in a U. S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.<br><br>Privacy Policy and Terms:<br><br>Click on this link to read the Policy and Terms

Date Posted:<br><br>2026-05-14<br><br>Country:<br><br>United States of America<br><br>Location:<br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2<br><br>Position Role Type:<br><br>Onsite<br><br>U. S. Citizen, U. S. Person, or Immigration Status Requirements: <br><br>The ability to obtain and maintain a U. S. government issued security clearance is required. U. S. citizenship is required, as only U. S. citizens are eligible for a security clearance<br><br>Security Clearance Type: <br><br>DoD Clearance: Secret<br><br>Security Clearance Status: <br><br>Active and existing security clearance required after day 1<br><br>Job Description<br><br>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggress ion. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.<br><br>What You Will Do:<br><br>The MIR will provide in depth system knowledge and field experience related to the theory of operation and troubleshooting skills required to resolve complex Patriot missile system Major End Items (MEI) electronic and mechanical problems. The SROC ensures that appropriate and accurate information on all equipment is reported to program leadership and the customer.<br><br>The MIR will provide day-to-day execution on the Qatar Depot Operations program as well as demonstrate the ability to perform depot level diagnostic, fault isolation, cleanup and repair capability for Patriot Weapon System MEIs.<br><br>The MIR must affect all electronic repairs on location with detailed system knowledge, the ability to use all of the hardware and software tools currently available to Organizational and Intermediate Maintenance.<br><br>The MIR also monitors work performed by subordinates to insure it meets or exceeds established quality standards.<br><br>Must be able to lift 50 lbs. and work in an extreme environment.<br><br>This position is located in Doha, Qatar.<br><br>Qualifications You Must Have:<br><br>Successful completion of a Patriot System Intermediate Maintenance Course for MOS 14E/27X/34S/94S/916A/918D or an equivalent course of instruction on a similar electronic system conducted by the military or the system contractor.<br><br>Bachelor’s degree or Associates Degree with 2 years of related experience or HS Diploma/GED with 4 years of related experience.<br><br>Demonstrated 4 years of field maintenance experience troubleshooting, fault isolation, repair, and functional verifications of the Patriot Air Defense system or similar electronic systems using maintenance diagnostics, unit self-tests, BITE, tools and available test equipment.<br><br>Demonstrated experience with Department of the Army Modification Work Order (DAMWO) installations, to include system integration and checkout.<br><br>Active and transferable U. S. government issued security clearance is required prior to start date. U. S. citizenship is required, as only U. S. citizens are eligible for a security clearance.<br><br>Qualifications We Prefer:<br><br>Above qualifications plus five (5) years Patriot Depot Forward maintenance experience.<br><br>Demonstrated experience with Raytheon Quality Control procedures.<br><br>Demonstrated experience of the Patriot refurbishment, modification, and Enhanced Deep Maintenance.<br><br>Previous experience in International Patriot FMS Programs with experience living and working in an overseas location.<br><br>Required Education:<br><br>Bachelor's degree in related field and at least 5 years of related experience. Experience can be substituted for educational requirements. Must have at least 10 years of related experience without a degree.<br><br>What We Offer:<br><br>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.<br><br>Additional Information:<br><br>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products<br><br>#Patriot<br><br>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.<br><br>The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U. S.-based role. If the successful candidate resides in a U. S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.<br><br>Privacy Policy and Terms:<br><br>Click on this link to read the Policy and Terms

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Company: Boeing Aerospace Operations Government Training Services is looking for a Mid-Level Systems Administrator to join the F-15QA Aircrew Training Services Team in Al-Udeid AB, Qatar . The selected candidate will support daily aircrew training and flight operations by maintaining and troubleshooting Joint Mission Planning System (JMPS) and Mission Debriefing System (MDS) software, hardware, and networking. The selected candidate will also be responsible for maintaining Data Transfer Modules (DTMs), assisting with daily physical security duties, some personnel security duties, and occasionally providing instruction on JMPS, MDS, and security-related topics. This position will be supporting the F-15QA Aircrew Training Services Foreign Military Sales contract in Qatar. This is a Long-Term Assignment to Al-Udeid AB, Qatar set until November 2027. Extension past this date is contingent upon contract renewal. Relocation/assignment benefits to the international location will be provided. Position Responsibilities: Performs system integration, hardware and software installation, configuration and disposition of servers and workstations to support the architecture Provides problem resolution and technical support for delivery systems Provides support for the design, validation and configuration management of computing delivery systems Administers users system access and works to protect information to meet security requirements Monitors system performance to support capacity planning, backup and disaster recovery planning</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>3+ years experience installing, troubleshooting, configuring, and administering Windows OS (Windows 10 and later)</li><li>3+ years experience implementing, troubleshooting, and administering software in a Windows desktop environment</li><li>3+ years experience providing basic network support and installing, troubleshooting, and configuring network devices such as switches, printers, and network-attached storage (NAS) devices</li><li>3+ years experience with Microsoft Office suite</li><li>Experience managing or working in a closed area/SCIF</li><li>Experience delivering priorities in a fast-paced environment</li><li>Experience working overseas with foreign customers and/or foreign military personnel, especially in the Middle East region</li><li>Experience using Joint Mission Planning System (JMPS) or Aviation Mission Planning System (AMPS) software</li><li>Experience giving briefings and/or classroom instruction on security related topics or application-specific software usage</li><li>CompTIA Network+ and/or Security+ certification</li><li>Military experience in an IT- or aviation-related field</li><li>Willingness to work changing schedules based on operational requirements, sometimes including at night or holidays</li><li>Candidate must be able to obtain a work visa, depending on requirements of the country</li><li>Candidate must be able to meet the cultural requirements of the country, as applicable</li><li>Employment is contingent on the candidate s ability to satisfy all labor and immigration formalities of the country</li><li>Successful candidates for this job must satisfy the Company s Conflict of Interest (COI) process.</li><li>Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.</li><li>This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a U.S. Person as defined by 22 C.F.R. 120.62 is required. U.S. Person includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.</li><li>This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)</li><li>Employer will not sponsor applicants for employment visa status.</li></ul><p></p></section>

We have a new requirement for a Senior Systems Engineer to join SOC Fusion Center team in Doha. This is a hands-on infrastructure role covering Linux, Windows, virtualization, monitoring, and backup across a mission-critical environment.<br>Experience required: 8+ years in systems engineering/administration, with strong exposure to networks, servers, and virtualization platforms.<br>Key responsibilities:On the Linux side, you'll handle OS installation and configuration, user and access management, package management (apt/yum), routine patching, performance monitoring, backup and recovery, firewall and IDS/IPS configuration, security audits, and network services like DNS, DHCP, and VPN. On the Windows side, you'll manage Windows Server environments, user/group administration, Group Policy Objects, security updates, file shares, antivirus and firewall configuration, security audits and risk assessments, and core network services. On virtualization, you'll work across VMware v Sphere (ESXi, v Center) and Nutanix clusters — deployment, configuration, performance tuning, VM management, and networking, including VXRail. You'll also own Zabbix monitoring end-to-end (server setup, host/trigger configuration, dashboards, alerting and reporting) and Veeam Backup operations (job monitoring, alerting, storage management, deduplication, and capacity planning).<br>Required skills: Unix and Windows administration, VMware and Nutanix, VXRail, Zabbix, Veeam Backup, and a strong grasp of security, storage, data protection, and disaster recovery best practices. Good written and verbal communication is essential.<br>Certifications: RHCE is mandatory.<br>Nice to have: Experience supporting 24x7 production / mission-critical systems, Dev Ops exposure, and willingness to travel to client sites and datacenters.<br>Qualifications: Bachelor's degree or equivalent relevant work experience.<br>Location: Doha, Qatar – SOC Fusion Center<br>If this matches your background, send your CV or reach out to info@simplix.qa directly.

We have a new requirement for a Senior Systems Engineer to join SOC Fusion Center team in Doha. This is a hands-on infrastructure role covering Linux, Windows, virtualization, monitoring, and backup across a mission-critical environment.<br>Experience required: 8+ years in systems engineering/administration, with strong exposure to networks, servers, and virtualization platforms.<br>Key responsibilities:On the Linux side, you'll handle OS installation and configuration, user and access management, package management (apt/yum), routine patching, performance monitoring, backup and recovery, firewall and IDS/IPS configuration, security audits, and network services like DNS, DHCP, and VPN. On the Windows side, you'll manage Windows Server environments, user/group administration, Group Policy Objects, security updates, file shares, antivirus and firewall configuration, security audits and risk assessments, and core network services. On virtualization, you'll work across VMware v Sphere (ESXi, v Center) and Nutanix clusters — deployment, configuration, performance tuning, VM management, and networking, including VXRail. You'll also own Zabbix monitoring end-to-end (server setup, host/trigger configuration, dashboards, alerting and reporting) and Veeam Backup operations (job monitoring, alerting, storage management, deduplication, and capacity planning).<br>Required skills: Unix and Windows administration, VMware and Nutanix, VXRail, Zabbix, Veeam Backup, and a strong grasp of security, storage, data protection, and disaster recovery best practices. Good written and verbal communication is essential.<br>Certifications: RHCE is mandatory.<br>Nice to have: Experience supporting 24x7 production / mission-critical systems, Dev Ops exposure, and willingness to travel to client sites and datacenters.<br>Qualifications: Bachelor's degree or equivalent relevant work experience.<br>Location: Doha, Qatar – SOC Fusion Center<br>If this matches your background, send your CV or reach out to info@simplix.qa directly.

<p>Job Description: Pre-Sales Engineer</p><p><strong>Location:</strong> Doha, Qatar <strong>Experience Level:</strong> 3–5 Years (Mid-Level)<strong>Industry:</strong> IT & Cyber Security</p><br><p><strong>Desired Candidate Profile</strong></p><p>Role Overview</p><p>We are seeking a dynamic and technically proficient Pre-Sales Engineer to join our team in Doha. The ideal candidate will act as a technical bridge between the sales team and clients, supporting the sales cycle with strong technical expertise in IT infrastructure and Cyber Security solutions. This role requires a blend of technical knowledge, presentation skills, and customer-facing experience to effectively position solutions and drive business growth.</p><p>Key Responsibilities</p><ul><li><p>Support the sales team with technical expertise throughout the pre-sales cycle, including solution design, proposal development, and presentations.</p></li><li><p>Conduct product demonstrations, proof of concepts (POCs), and technical presentations to prospective clients.</p></li><li><p>Understand customer requirements and translate them into tailored technical solutions covering IT infrastructure and Cyber Security domains.</p></li><li><p>Prepare and respond to RFPs, RFIs, and technical proposals in coordination with the sales and delivery teams.</p></li><li><p>Collaborate with OEMs/vendors/partners to stay updated on the latest technologies, product roadmaps, and solution offerings.</p></li><li><p>Assist in the preparation of Bill of Materials (BOM), solution architecture diagrams, and technical documentation.</p></li><li><p>Provide technical training and support to the internal sales team to enhance their product knowledge and confidence in client interactions.</p></li><li><p>Participate in client meetings, workshops, and technical discussions to address queries and provide solution clarity.</p></li><li><p>Coordinate with the technical/delivery team to ensure proposed solutions are feasible and align with client requirements.</p></li><li><p>Stay updated with emerging trends in IT and Cyber Security to identify new business opportunities.</p></li></ul><p>Required Skills & Qualifications</p><ul><li><p>Bachelor's degree in Information Technology, Computer Science, Engineering, or a related field.</p></li><li><p>3–5 years of relevant experience in a Pre-Sales, Solutions Engineering, or Technical Consulting role within the IT and Cyber Security domain.</p></li><li><p>Strong understanding of IT infrastructure (networking, servers, storage, cloud) and Cyber Security concepts (firewalls, endpoint security, SIEM, IAM, etc.).</p></li><li><p>Hands-on knowledge of leading Cyber Security and IT vendor solutions (e.g., Fortinet, Palo Alto, Cisco, Microsoft, etc. – customize as per your OEM partnerships).</p></li><li><p>Excellent presentation and communication skills, with the ability to explain technical concepts to both technical and non-technical audiences.</p></li><li><p>Proven ability to work closely with sales teams to support deal closure through technical validation.</p></li><li><p>Experience in preparing technical proposals, solution documents, and BOMs.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Relevant certifications (e.g., CompTIA Security+, CCNA, Fortinet NSE, Microsoft certifications) are an added advantage.</p></li></ul><p>Preferred Attributes</p><ul><li><p>Prior experience working in the Qatar/GCC market is preferred.</p></li><li><p>Ability to manage multiple opportunities and work under pressure to meet deadlines.</p></li><li><p>Strong interpersonal skills to build relationships with both internal teams and external clients.</p></li><li><p>Self-motivated, proactive, and customer-focused approach.</p></li></ul>

About The Ned Doha:<br><br>Housed within Doha’s iconic former Ministry of Interior building, The Ned Doha is not just a hotel, it is a refined luxury destination where heritage, elegance, and contemporary sophistication come together to create an exceptional experience.<br><br>With seven distinctive dining concepts, 90 beautifully designed bedrooms, elegant event spaces, and Ned’s Club, our private members’ club complete with a rooftop terrace, spa, gym, and a breathtaking 30-metre outdoor pool, The Ned Doha blends heritage, creativity, and modern luxury into one vibrant experience.<br><br>The Role:<br><br>We are seeking a Night Manager who would be responsible for overseeing the overall hotel operation during the night shift, ensuring a seamless, safe and consistent guest experience in line with The Ned's ultra luxury service standards.<br><br>The role will have overall oversight of the Front Office and hotel operations during the night, while working closely with all departments to ensure guest needs, operational requirements and service standards are fully supported.<br><br>What You’ll Be Doing:<br><br> Oversee the overall hotel operation during the night shift, ensuring smooth and efficient operations across all areas. Take full ownership of the Front Office operation during the night, including guest arrivals, departures, requests, complaints and service recovery. Conduct regular hotel rounds and monitor the building, public areas and operational departments to ensure cleanliness, safety, security and service standards are maintained. Support other departments during the night whenever operational assistance is required and ensure effective coordination between departments. Handle guest concerns and requests with a high level of professionalism, discretion and emotional intelligence, in line with The Ned's ultra luxury service culture. Ensure all overnight guest interactions reflect strong knowledge of luxury hospitality, LQA & Forbes standards and The Ned service philosophy. Demonstrate strong awareness and understanding of Qatari culture, local customs and guest expectations. Maintain good knowledge of food and beverage operations, outlets, menus and services to confidently support guest enquiries and requests. Work closely with Security and other overnight teams to ensure a safe and secure environment for guests and colleagues. Respond effectively to emergencies and unexpected situations, taking appropriate decisions and escalating when required. Maintain detailed knowledge of hotel facilities, services, operating hours, events and guest experiences. Ensure all operational standards, policies, procedures and LQA requirements are consistently followed throughout the night. <br><br>About You:<br><br> Previous experience as a Night Manager or in a senior Front Office or Rooms Division role within a luxury or ultra luxury hotel. Strong experience in overnight hotel operations and Night Audit procedures. Previous experience with OPERA PMS is required. Strong understanding of Front Office, Finance and Night Audit procedures. Excellent communication and interpersonal skills. Strong knowledge of LQA & Forbes standards and luxury guest service. Good understanding of Qatari culture, local customs and expectations. Ability to make decisions independently and manage multiple situations during the night. Strong leadership, problem solving and service recovery skills. Arabic language is preferred. Excellent command of English. Previous experience in Qatar or the GCC is preferred. <br><br>What’s In It for You?<br><br>Tax-free Monthly salary21 calendar days annual leave and 11 paid public holidays Sick leave benefits as per Qatar Labour Law Private Medical Insurance for self End of Service benefits Complimentary meals at Neddy’s, our team restaurant (breakfast, lunch & dinner) Exclusive hotel and dining rates for you, your family, and friends Outstanding learning, development, and career progression opportunities Reward and recognition programmes The opportunity to work in one of Doha’s most iconic lifestyle destinations<br><br>Our Culture<br><br>At The Ned Doha, we go beyond celebrating diversity—we continuously challenge ourselves to be better. Inclusion, respect, and opportunity are at the heart of everything we do, and we are committed to creating a workplace where everyone can thrive.<br><br>Ready to lead something extraordinary? Apply today and join us as Night Manager!<br><br>#Night Manager #The Ned Doha

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! You will support the design, implementation, and maintainance of robust IT systems to enhance guest experiences and streamline operations. As an IT Supervisor, and services across multiple sites – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here’s what you’ll do during a typical day:<br><br>Support IT strategy and implementation: Support the design and execution of IT initiatives across multiple properties, ensuring alignment with area, cluster, and corporate objectives in collaboration with the Area Director of Technology Services Enhance system performance and security: Monitor, diagnose, and adjust performance on LAN and network servers while managing upgrades, directory structures, and preventive maintenance to optimize security, compliance, and system reliability Resolve technical challenges: Identify and implement solutions to user concerns related to personal computing, software applications, and network connectivity, providing training and support to ensure a seamless technology experience. Ensure compliance with IT standards: Oversee the implementation, maintenance, and upgrades of IT infrastructure, ensuring compliance with Hilton Technology Network (HTN) standards and certification requirements, including managing shared technology resources and backup procedures Lead technology projects: Assist with the execution of major system implementations, including workstation and server refreshes, Wi-Fi, PBX, and point-of-sale installations, ensuring projects are completed on time, within budget, and with minimal operational disruption Support hotel operations: Work closely with property management to ensure smooth IT operations, maintain critical site systems, and troubleshoot issues efficiently to minimize downtime. Inspire and develop the team: Supervise, coach, and mentor team members; conduct performance evaluations, provide professional development opportunities, and recognize achievements to build, retain, and engage a high-performing team<br><br>Qualifications<br><br>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member:<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>In Addition, This Role Requires The Following Minimum Qualifications<br><br>Diploma Computer Science, Information Technology, or a related field. Relevant certifications (e.g., Comp TIA, Cisco, Microsoft). Strong knowledge of hospitality systems and IT best practices. Leadership and project management skills. Experience with network administration, cybersecurity, and cloud solutions. Excellent troubleshooting and communication abilities. <br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

Job Summary We are seeking an experienced Senior ESB Developer with strong expertise in IBM App Connect Enterprise (ACE), IBM Integration Bus (IIB), IBM MQ, API integration, and enterprise middleware solutions. The ideal candidate will be responsible for designing, developing, deploying, and supporting enterprise integration solutions that enable seamless communication between business applications, databases, APIs, and external systems. The role requires extensive hands-on experience in IBM ACE, IBM MQ, REST/SOAP services, ESQL, message transformation, enterprise integration patterns, CI/CD, and API management while ensuring high availability, scalability, security, and performance of enterprise integration platforms. Key Responsibilities Enterprise Integration Development Design, develop, and maintain enterprise integration solutions using IBM App Connect Enterprise (ACE). Build scalable and reusable integration services. Develop message flows and integration components. Implement enterprise integration patterns. Develop secure, high-performance middleware solutions. API & Middleware Development Design and develop RESTful APIs. Develop SOAP Web Services. Integrate enterprise applications using IBM MQ. Develop synchronous and asynchronous integrations. Support API lifecycle management. Implement secure API integrations. System Analysis & Solution Design Analyze business and technical requirements. Translate business requirements into integration solutions. Design enterprise integration architecture. Develop reusable middleware components. Ensure alignment with enterprise architecture standards. Message Transformation Develop and support data transformation using:XMLJSONDFDLCSVMRMXMLNSCISO8583Perform:Message Mapping Schema Validation Data Transformation Data Routing IBM MQ Administration & Messaging Develop IBM MQ-based integrations. Configure reliable messaging. Implement asynchronous communication. Support message queues. Troubleshoot MQ-related issues. Optimize messaging performance. Testing & Quality Assurance Develop Unit Tests. Perform Integration Testing. Support System Integration Testing (SIT). Debug middleware issues. Validate API functionality. Ensure code quality and compliance. Use tools including:SOAPUIPostman CI/CD & Dev Ops Manage source code using Git. Support Jenkins CI/CD pipelines. Automate deployments. Support Dev Ops practices. Manage environment deployments across Development, QA, UAT, and Production. Production Support Monitor integration services. Investigate production incidents. Perform Root Cause Analysis (RCA). Resolve integration failures. Optimize middleware performance. Ensure high system availability. Documentation Prepare and maintain:Technical Design Documents Integration Specifications API Documentation Deployment Guides Operational Procedures Interface Documents System Architecture Documentation Collaboration Work closely with:Business Analysts Solution Architects Application Developers QA Engineers Infrastructure Teams Operations Teams Business Users Participate in Agile delivery. Support SDLC activities. Mentor junior developers and enforce development standards. Education Bachelor's Degree in:Computer Science Information Technology Computer Engineering Electronics & Communication Engineering Software Engineering Related Engineering Discipline Required Experience Minimum 8–10+ years of experience in enterprise integration development. Strong hands-on experience with IBM App Connect Enterprise (ACE). Experience with IBM Integration Bus (IIB) / Web Sphere Message Broker. Experience with IBM MQ. Experience in enterprise integration and middleware platforms. Experience working in Banking, Financial Services, Insurance, Logistics, or Enterprise environments is preferred. Mandatory Technical Skills Enterprise Integration IBM App Connect Enterprise (ACE) IBM Integration Bus (IIB) IBM Web Sphere Message Broker Enterprise Service Bus (ESB) Enterprise Integration Middleware Development Integration Architecture Message Flows IBM Technologies IBM ACEIBM MQIBM API Connect IBM Integration Solutions API Development REST APIsSOAP Web Services Microservices API Integration API Security API Design Messaging IBM MQMessage Queuing Asynchronous Messaging Publish/Subscribe Message Routing Programming ESQLShell Scripting Data Formats XMLJSONDFDLCSVMRMXMLNSCISO8583XML Schema Data Mapping Message Transformation Databases Oracle Database Microsoft SQL Server MySQLSQLDev Ops Git Jenkins CI/CD Pipelines Dev Ops Deployment Automation Testing Unit Testing Integration Testing SOAPUIPostman Debugging Performance Testing Operating Systems Linux AIXUNIXSDLCAgile Scrum SDLCCode Reviews Technical Documentation Production Support Root Cause Analysis (RCA) Preferred Skills IBM API Connect Microservices Architecture Container Platforms (Docker/Kubernetes) Open Shift Cloud Integration Banking Domain Insurance Domain Financial Services Enterprise Integration Patterns (EIP)

<p>The Enterprise OpenShift Architect owns the design, implementation, and governance of a production-grade Red Hat OpenShift platform running on Azure Virtual Machines (self-managed OpenShift on Azure IaaS). The role spans platform architecture, networking, storage, security, multi-cluster governance (ACM), automation, HA/DR, the operations model, and application onboarding. This is a senior technical leadership role combining architecture ownership with strong hands-on delivery. The architect provides strategic direction for multi-cluster, multi-environment OpenShift deployments supporting enterprise workloads at scale, and works alongside platform engineers to turn that architecture into running infrastructure. <br></p><p>Platform Architecture</p><ul><li><p>Define the OpenShift platform strategy and target-state architecture.</p></li><li><p>Design enterprise clusters across Production, Non-Production, DMZ, and DR environments.</p></li><li><p>Define cluster segmentation and workload isolation strategies.</p></li><li><p>Establish an ACM-based multi-cluster management architecture.</p></li></ul><p>Azure Infrastructure Design</p><ul><li><p>Design the OpenShift hosting architecture within Azure Landing Zones.</p></li><li><p>Define subscriptions, VNets, peering, security zones, and private connectivity.</p></li><li><p>Design integration with enterprise security and identity platforms (Microsoft Entra ID).</p></li></ul><p>OpenShift Platform Design</p><ul><li><p>Design Master, Infra, and Worker node architecture and sizing.</p></li><li><p>Define control-plane, application-plane, and shared-services architecture.</p></li><li><p>Design ingress, routing, registry, observability, and (where required) service-mesh frameworks.</p></li><li><p>Define cluster capacity-planning and scaling models.</p></li></ul><p>Multi-Cluster Governance</p><ul><li><p>Implement Red Hat ACM governance and policy management.</p></li><li><p>Establish centralised lifecycle management for all clusters.</p></li><li><p>Define cluster onboarding and compliance frameworks.</p></li></ul><p>Security Architecture</p><ul><li><p>Design Entra ID integration and SSO architecture.</p></li><li><p>Define RBAC, namespace governance, SCC policies, and pod-security controls.</p></li><li><p>Implement RHACS / ACS security frameworks.</p></li><li><p>Establish image governance and vulnerability-management processes.</p></li></ul><p>Storage & Data Services</p><ul><li><p>Define the storage strategy using Azure native storage, Azure Files, Azure NetApp Files, or OpenShift Data Foundation (ODF).</p></li><li><p>Design persistent-storage architecture and disaster-recovery strategies with defined RTO / RPO targets.</p></li><li><p>Implement backup and restoration capabilities.</p></li></ul><p>Automation & Platform Engineering</p><ul><li><p>Design the GitOps operating model (Argo CD / OpenShift GitOps).</p></li><li><p>Implement Terraform and Ansible-based platform automation.</p></li><li><p>Standardise cluster deployment and lifecycle automation.</p></li><li><p>Establish Platform-as-Code methodologies.</p></li></ul><p>Operations & Production Readiness</p><ul><li><p>Define monitoring, logging, backup, patching, and upgrade models.</p></li><li><p>Develop operational runbooks and support procedures.</p></li><li><p>Lead production-readiness reviews and operational handovers.</p></li><li><p>Coordinate with Red Hat support and manage the subscription / entitlement model.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience</p><ul><li><p>8+ years of infrastructure and platform-engineering experience.</p></li><li><p>4+ years in OpenShift / Kubernetes architecture or senior platform engineering.</p></li><li><p>Proven delivery of at least one production-grade enterprise OpenShift platform.</p></li><li><p>Hands-on experience running OpenShift on Azure (self-managed on VMs strongly preferred; ARO experience considered with willingness to ramp on self-managed).</p></li><li><p>Strong background in Kubernetes, automation, security, and platform operations.<br></p></li></ul><p><strong>Certifications (preferred)</strong></p><ul><li><p>Red Hat Certified Specialist in OpenShift Administration (EX280) or equivalent.</p></li><li><p>Red Hat Certified Architect (RHCA) — a strong plus.</p></li><li><p>Microsoft Azure certification (AZ-104 / AZ-305) — advantageous.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic IT professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an IT Supervisor your role will include key responsibilities such as:<br><br>• Monitor the operation and security of all computer hardware and ensure that it is operating properly<br>• Serve as primary contact for all servicing of computers, printers, etc.<br>• Maintain a sufficient inventory of all office and computer supplies<br>• Maintain all hardware and software logs updated as per departmental working procedures<br>• Maintain the documentation of all hardware configuration and inventory<br>• Maintain the documentation of the telephone system configuration and all MPT lines<br>• Understand all the department working procedures and perform the related tasks as described<br>• Carry out the repairs and maintenance of all PCs, printers, telephones, interactive system, key lock system, etc.<br>• Maintain all users access request and authorizations (Win2000, E-mail, Opera, Micros, Novell)<br>• Respond to all users request and provide them with adequate support</p> </div>