Production Technician Jobs

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

Primary Purpose Of The Job<br><br>Carry out highly skilled maintenance, repair and overhaul of Rotary equipment and Minor/routine maintenance of static equipment installed at Qatar Energy Refinery process units i.e. Refinery 1 & 2, RFCC, Condensate Refinery, Utilities/Off sites, Tank Farm, Berth#6, BSV3 and Station C1 at Hamad Intl. Airport (HIA).<br><br>Required Experience And Skills<br><br>Minimum of level 5 in English communication skills (oral/written). Extensive knowledge of Mechanical Rotary equipment. Ability to work in a multinational environment. Minimum of 8 years experience in Refinery/Oil& Gas/Petrochemical plants. Must have experience in Pumps (Single & Multistage), Steam/Gas Turbines, centrifugal & Reciprocating Compressors, Turbo machinery etc. Capable of using computer for creating permits in RIS, preferably having knowledge & experience of using SAP & MS Office (Word & Excel)<br><br>Educational Qualifications<br><br>Qualified with a Diploma/Certificate in Mechanical Technology from a recognized institution.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Execute electrical pre-commissioning and commissioning activities.</span><br><span>Perform insulation resistance, continuity, phase sequence, functional, and operational tests.</span><br><span>Test transformers, switchgear, MCCs, motors, cables, panels, UPS systems, and electrical distribution equipment.</span><br><span>Identify and troubleshoot electrical faults.</span><br><span>Carry out cable checking, termination, glanding, and rectification activities.</span><br><span>Perform electrical isolation and de-isolation in accordance with approved procedures.</span><br><span>Support energization, start-up, shutdown, and equipment trial runs.</span><br><span>Read and follow single-line diagrams, schematics, wiring diagrams, and test procedures.</span><br><span>Record test results and complete commissioning checklists.</span><br><span>Follow PTW, LOTO, PPE, and electrical safety requirements.</span><br></span><br><span>Requirements<span>Diploma, ITI, or technical qualification in Electrical Engineering.</span><br><span>Minimum 5 years of relevant electrical experience.</span><br><span>Proven hands-on experience in electrical commissioning activities is mandatory.</span><br><span>Candidates with only construction or installation experience will not be considered.</span><br><span>Strong knowledge of electrical testing, troubleshooting, and isolation procedures.</span><br><span>Ability to use multimeters, insulation resistance testers, clamp meters, and other testing equipment.</span><br><span>Ability to read electrical drawings and wiring diagrams.</span><br><span>Fluent in spoken and written English.</span><br><span>Experience in Oil &amp; Gas and desalination projects will be highly preferred.</span><br></span><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><ul><li>Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>Air Compressor</li><li>AHU fans and blower</li><li>Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>Mechanical forklift</li><li>Mechanical manlift</li><li>Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li></ul><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>To perform the Insulation works in the site and to ensure that the same is executed as per the Project's requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>High School. Good Experience as an Insulator. Minimum 5 Years GCC or Indian Experience in Oil &amp; Gas Field.</p>

<p>Principal: Qatar District Cooling Company</p><p>Country: Doha, Qatar</p><p>Qualifications: Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</li><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li><li>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</li><li>Supervise, guide and monitor work done by external vendors.</li><li>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</li><li>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</li><li>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</li><li>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</li><li>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</li><li>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</li><li>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</li><li>Knowledge of environmental regulations related to refrigerant handling and disposal.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</li><li>Work effectively with other team members, including engineers, supervisors, and external vendors.</li><li>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</li><li>Where applicable, provide assistance and support to other team members, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li><li>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Carry out preventive and corrective maintenance on mechanical equipment.</p><p>• Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><p>• Maintain RO plant equipment including:</p><p>o High-pressure pumps</p><p>o Booster pumps</p><p>o Pressure vessels</p><p>o RO skids and membranes</p><p>o Filters and strainers</p><p>o Chemical dosing systems</p><p>o Valves and actuators</p><p>o Heat exchangers</p><p>o Cranes and lifting equipment</p><p>• Perform equipment alignment, lubrication, and condition monitoring.</p><p>• Participate in commissioning, startup, and shutdown activities.</p><p>• Assist in root-cause analysis of equipment failures.</p><p>• Complete maintenance reports and update CMMS/work orders.</p><p>• Coordinate with operations, electrical, and instrumentation teams.</p><p>• Follow permit-to-work procedures and HSE requirements.</p><p>• Respond to emergency breakdowns and plant call-outs when required.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p><p>• 3–5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p><p>• Experience with RO desalination systems is preferred.</p><p>• Knowledge of rotating and static equipment maintenance.</p><p>• Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p><p>• Familiarity with maintenance management systems (CMMS).</p></div>

<p>Job Description:</p><p>Measure, mark dimensions and lay out material to be installed using tools.</p><p>Fasten joints and seams in sheet metal .</p><p>Knowledge &amp; Qualification:</p><p>10th Passed</p><p>Role &amp; Responsibilities:</p><p>Minimum 5 Years Work Experience as SM Fitter in GCC or india in Oil &amp; Gas Sector</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><p>Chillers</p><p>Process Area of FCU, AHU, and Ventilation System</p><p>Refrigerant recovery, recycling and purifying System</p><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Job Description: JOB PURPOSE / OBJECTIVE Understand, evaluate, and maintain various types of Instrumentation related data for the facility through SPI INTools. KEY ACCOUNTABILITIES Facility changes and modifications. • Ensure that instrumentation related deliverables are updated in SPI INTools as part of the facility change process within a stipulated timeframe and per company. Process Safety Information Policy and Management of Change (MOC) requirements. • Timely updating of PSI Instrumentation deliverables like Instrument Index, Specification sheets, Junction Box & Panel Wiring drawings, Interconnection diagrams, Loop drawings, Alarm & Trip Set Controller summary, I/O assignments etc. • Verify the changes on Instrumentation data as part of the facility change and integration including field verification as and when required. • Responsible to provide updated SPI INTools related information for the ongoing facility Project Engineering, operation, and maintenance. • Create and maintain new instrumentation data into SPI INTools as part of facility engineering requirements. • Issuance and maintenance of entire instrument tags in the plant through INTools without having any duplication. Administration of SPI INTools database • Work closely with IT & SPI INTools Contractor for the SPI System administration for data initialization, data backup, data security, and data recovery and SPI INTools periodic upgrade. • Provide support for bulk data extraction, data retrieval, various SPI INTools Report functionalities, management of users, groups, domains, user profiles, user training, software license renewal, etc. Quality, Health, Security, Safety and Environment • Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Instrument and Electrical Section to guarantee employee safety and delivery of high-quality products/services. Reporting • Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Instrumentation Engineering. • Preferred: Bachelor’s Degree in Instrumentation Engineering. Experience • Required: 3-5 years of experience in the O&G Industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Hands-on experience in using SPI INTools Languages • Required: English - Proficient. • Preferred: Arabic - Working knowledge. WORKING RELATIONSHIPS Internal • Operations and Technical • Base load technicians External • Contractors and third-party service providers • Consultants and advisors</p>

<strong>Key Responsibilities</strong> <p></p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> </p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p> <p> </p> <p> <strong>Commissioning Experience</strong> </p> <p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> <strong>Inspection:</strong> <strong> </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p> <p> <strong>Commissioning:</strong> <strong> </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p> <p> <strong>Troubleshooting:</strong> <strong> </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p> <p> <strong>Repair &amp; Maintenance:</strong> <strong> </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p> <p> <strong>Overhauling:</strong> <strong> </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p> <p> <strong>Piping Systems:</strong> <strong> </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>Execute instrumentation and control pre-commissioning and commissioning activities.</span><br><span>Perform loop checking, continuity testing, signal verification, and functional testing.</span><br><span>Calibrate pressure, temperature, flow, and level instruments.</span><br><span>Test and commission transmitters, switches, control valves, actuators, sensors, and analyzers.</span><br><span>Perform control valve stroking and functional checks.</span><br><span>Troubleshoot instrument, wiring, signal, communication, and control-system faults.</span><br><span>Verify installations against P&amp;IDs, loop diagrams, hook-up drawings, datasheets, and wiring diagrams.</span><br><span>Support testing of PLC, DCS, ESD, fire and gas, and other control systems.</span><br><span>Use HART communicators, loop calibrators, pressure calibrators, and related test equipment.</span><br><span>Complete calibration sheets, loop folders, commissioning checklists, and test reports.</span><br><span>Follow PTW, LOTO, isolation, and HSE procedures.</span><br></span><br><span>Requirements<span>Diploma, ITI, or technical qualification in Instrumentation, Electronics, or Control Engineering.</span><br><span>Minimum 5 years of relevant instrumentation experience.</span><br><span>Proven hands-on experience in instrumentation and control commissioning is mandatory.</span><br><span>Candidates with only construction or installation experience will not be considered.</span><br><span>Strong experience in loop testing, calibration, functional testing, and troubleshooting.</span><br><span>Ability to read P&amp;IDs, loop diagrams, hook-up drawings, and wiring diagrams.</span><br><span>Familiarity with PLC, DCS, ESD, fire and gas, transmitters, and control valves.</span><br><span>Fluent in spoken and written English.</span><br><span>Experience in Oil &amp; Gas and desalination projects will be highly preferred.</span><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>* Perform preventive, predictive, and corrective maintenance on electrical equipment and systems.</p><br><br><p>* Troubleshoot and repair:</p><br><br><p>o Motors and pumpso Motor Control Centers (MCCs)</p><br><br><p>o Variable Frequency Drives (VFDs)o Switchgear and transformers</p><br><br><p>o Power distribution systems (LV/MV)</p><br><br><p>o PLC and SCADA-related electrical components</p><br><br><p>* Inspect, test, and maintain electrical panels, breakers, relays, and control circuits.</p><br><br><p>* Assist in plant start-up, shutdown, and commissioning activities.</p><br><br><p>* Monitor plant electrical performance and identify potential failures.</p><br><br><p>* Read and interpret electrical drawings, single-line diagrams, and wiring schematics.</p><br><br><p>* Ensure compliance with safety procedures, lockout/tagout (LOTO), and permit-to-work systems.</p><br><br><p>* Coordinate with operations, mechanical, and instrumentation teams to minimize downtime.</p><br><br><p>* Maintain maintenance records, reports, and spare-parts inventory.</p><br><br><p>* Support emergency breakdown maintenance on a shift basis.<br></p><br><br>Skills<p>* Diploma / ITI / Technical Certificate in Electrical Engineering or Electrical Technology.</p><br><br><p>* 3-5 years (or as specified) of industrial electrical maintenance experience.</p><br><br><p>* Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><br><br><p>* Knowledge of:</p><br><br><p>o PLC systemso SCADA systemso VFDs</p><br><br><p>o MCCso LV/MV electrical systems</p><br><br><p>o Electrical safety standards and procedures.</p><br><br><br><p>Typical Equipment Maintained</p><br><br><p>* High-pressure RO pumps</p><br><br><p>* Feed water pumps</p><br><br><p>* MCC panels</p><br><br><p>* Transformers</p><br><br><p>* Generators and UPS systems</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Perform preventive, predictive, and corrective maintenance on electrical equipment and systems.</p><p>• Troubleshoot and repair:</p><p>o Motors and pumps</p><p>o Motor Control Centers (MCCs)</p><p>o Variable Frequency Drives (VFDs)</p><p>o Switchgear and transformers</p><p>o Power distribution systems (LV/MV)</p><p>o PLC and SCADA-related electrical components</p><p>• Inspect, test, and maintain electrical panels, breakers, relays, and control circuits.</p><p>• Assist in plant start-up, shutdown, and commissioning activities.</p><p>• Monitor plant electrical performance and identify potential failures.</p><p>• Read and interpret electrical drawings, single-line diagrams, and wiring schematics.</p><p>• Ensure compliance with safety procedures, lockout/tagout (LOTO), and permit-to-work systems.</p><p>• Coordinate with operations, mechanical, and instrumentation teams to minimize downtime.</p><p>• Maintain maintenance records, reports, and spare-parts inventory.</p><p>• Support emergency breakdown maintenance on a shift basis.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Diploma / ITI / Technical Certificate in Electrical Engineering or Electrical Technology.</p><p>• 3–5 years (or as specified) of industrial electrical maintenance experience.</p><p>• Experience in water treatment, wastewater treatment, or desalination plants, Oil &amp; gas / industrial backgrounds are preferred.</p><p>• Knowledge of:</p><p>o PLC systems</p><p>o SCADA systems</p><p>o VFDs</p><p>o MCCs</p><p>o LV/MV electrical systems</p><p>o Electrical safety standards and procedures.</p><p><br></p><p>Typical Equipment Maintained</p><p>• High-pressure RO pumps</p><p>• Feed water pumps</p><p>• MCC panels</p><p>• Transformers</p><p>• Generators and UPS systems</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><p>1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</p><p>2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</p><p>3. Tank (Structures, valves and fittings, air vents)</p><p>4. Air handling Units (Filter, ducting, AHU Housing)</p><p>5. Filtration system (Filters, housings, pipe and fittings)</p><p>6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system</p><p>7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>Monitor the activities of the outsourced Operation and Maintenance (O&amp;M) Contractor at site by reviewing daily reports, calibration reports, maintenance activities/reports, and Quality Control (QC) activities performed to ensure proper operation of the stations. Ensure property and equipment are secure. Verify that the spare parts interchanged by the contractor are original and as per approved specifications. Control all operational and maintenance activities at the ambient air quality stations and ensure all control systems related to the ambient air quality networks. Review and evaluate data to detect possible abnormalities related to the functioning of the stations and report to the section for further action. Keep records of all station inventories, data, reports, logs, and certificates to ensure traceability of results generated. Maintain systems to track schedules for maintenance, calibrations, and re-certifications on a timely basis and verify compliance by the Contractor. Report HSE statistics of the Contractors on a monthly basis. During emergencies, be available 24x7 and participate in incident investigations and provide ambient air quality and meteorological data to the investigating team. In case of incidents, ensure movement of the mobile monitoring AAQM station to the incident location by obtaining proper permits and securing power supply, etc. Accompany and assist the Technical Systems and Performance Audit Contractor during scheduled audits. Conduct independent first-party internal audits to verify AAQM station performance. Make regular station visits to oversee overall station functions (e.g., AC maintenance, generator tests, pest control, and general maintenance of the stations). Raise SAP requests and coordinate with the maintenance division for overall station maintenance. Maintain and raise SAP requests for troubleshooting Air Quality Modelling Servers.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electronics / Instrumentation / Meteorology / Environmental / Science (Chemistry, Physics) or equivalent qualification. Minimum of 5 years Ambient Air Quality Monitoring-related experience, preferably directly related to the O&amp;M activities of Ambient Air Quality Stations. Possess a valid Qatar driving license. Professional certification or license from a credible meteorological, environmental, or related association/society is an advantage. Technical understanding of air quality monitoring and environmental/meteorology requirements is essential. Upper Intermediate English (QP Level 6). Proven ability to organize and perform responsibilities with minimum supervision.</p>