Operation Specialist Jobs in Qatar

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation</p><p>Raise SO in CMMS when found during shift.</p><p>Security Rounds:</p><p>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:</p><p>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response</p><p>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System</p><p>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO</p><p>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:</p><p>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:</p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:</p><p>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:</p><p>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis</p><p>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:</p><p>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization</p><p>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:</p><p>Respond to any alarms or alerts and take necessary corrective actions.</p><p>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management</p><p>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems</p><p>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras</p><p>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</p><p>Occasionally attend site visits by visitors or contractors.</p><p>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Radisson Hotel Group is one of the world's largest hotel groups with ten distinctive hotel brands, and more than 1,460 hotels in operation and under development in 95+ countries. The Group’s overarching brand promise is Every Moment Matters with a signature Yes I Can! service ethos.<br><br><br><br>People are at the core of our business success and future. Our people are true Moment Makers and together we bring the culture, spirit, environment and opportunities that empower you to be your best, every day, everywhere, every time. Together, we make Every Moment Matter.<br><br><br><br></p><strong>Job Description<br><br></strong><ul><li>A thorough and methodical approach. </li><li>Good numeracy skills. </li><li>Completes routine purchasing operation requirements. </li><li>Ensure that correct supply levels are maintained. </li><li>Coordinate movement of all purchased materials from suppliers to the plants and address any supply/supplier issues. </li><li>Arrange for disposal of surplus materials. </li><li>Locate vendors of materials, equipment or supplies, and interview them to determine product availability and terms of sales. </li><li>Processes purchase orders for the acquisition/replenishment of routinely needed supplies, parts and materials. </li><li>Checking if there is enough stock in the inventory to meet requirements. </li><li>Placing orders with suppliers or vendors and ensuring that documentation is in order, with terms and conditions being clear. </li><li> Maintaining a filing system in the purchase department and updating appropriate records when required. </li><li> Looks for ways to reduce costs to the company, such as evaluating costs of purchasing from various suppliers to arrive at the best deal. </li><li>Inspecting consignments to verify if they are in order and as per agreed terms. </li><li>Interacting with suppliers in case of delay in delivery of supplies, receipt of damaged or incorrect quantity of goods. </li><li>Practices ‘Yes I Can’ attitude<br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Valid Qatar driving licence with a clean driving record. </li><li>Previous experience as a <strong>Purchasing Driver, Procurement Driver, Delivery Driver, or similar role</strong>, preferably in a 5-star hotel. </li><li>Good knowledge of Doha roads, locations, suppliers, markets, and industrial areas. </li><li>Good communication skills and the ability to communicate professionally with suppliers and team members. </li><li>Good numeracy skills for checking quantities, invoices, delivery notes, and purchase documents. </li><li>Able to collect and deliver purchased goods safely, accurately, and on time. </li><li>Assist the Purchasing Department with supplier collections, urgent purchases, and routine purchasing activities. </li><li>Check delivered items against purchase orders, invoices, and delivery notes and report discrepancies immediately. </li><li>Ensure purchased materials are handled, transported, and stored safely to prevent damage. </li><li>Maintain proper documentation for all collections and deliveries. </li><li>Ensure the vehicle is clean, safe, properly maintained, and ready for daily operations. </li><li>Follow all hotel, traffic, health &amp; safety, and company policies and procedures. </li><li>Maintain a professional appearance and courteous attitude when dealing with suppliers and team members. </li><li>Demonstrate reliability, punctuality, flexibility, and the ability to work under pressure. </li><li><strong>Practise the “Yes I Can!” attitude</strong> and consistently support the hotel’s 5-star service standards.</li></ul>

<p>Field Operator - ( 2 ) Position: Field Operator - (2) Date Open: Feb 19, 2026 Closing Date: Jun 30, 2026 Principal: Qatar District Cooling Company Country: Doha, Qatar The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Safety Observation Raise SO in CMMS when found during shift. Security Rounds: Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check). Safety Check: Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date. Emergency Response Respond to emergencies, such as equipment failures, fires, or spills. PTW System Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities. Equipment Line Up / LOTO Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance. Equipment Inspection: Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed. Parameter Monitoring: Monitor key process parameters (pressure, temperature, flow rate, etc.) System Startup: Initiate the startup procedure for assigned systems, following established checklists and procedures. System Shutdown: If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures. Alarm &amp; Event (A&amp;E) Analysis Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies. Shift Handover: Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing. Plant Optimization Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators. Troubleshooting and Maintenance: Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations. Defect Management Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority. Monitoring of Chemical Treatment Systems Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits. Others and Extras Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><h4>Additional Qualifications:</h4><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption.</li><li>Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption.</li><li>Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants. Minimum of 5 years working experience is required for this position

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants.</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.<br>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).<br>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.<br>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.<br>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.<br>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.<br>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.<br>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)<br>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.<br>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.<br>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.<br>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.<br>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.<br>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.<br>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.<br>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.<br>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor<br><br>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>Minimum of 5 years working experience is required for this position</p>

Field Operator - ( 2 ) <br> <div> <div> <b>Position:</b> </div> <div> Field Operator - (2)<br> </div> </div> <div> <div> <b>Date Open:</b> </div> <div> Feb 19, 2026 </div> </div> <div> <div> <b>Closing Date:</b> </div> <div> Jun 30, 2026 </div> </div> <div> <div> <b>Principal:</b> </div> <div> Qatar District Cooling Company </div> </div> <div> <div> <b>Country:</b> </div> <div> Doha, Qatar </div> </div> <div> <div> <b>Qualifications:</b> </div> <div> Candidates must have at least <b>Vocational Diploma / Short Course Certificate</b> <br> The job requires <b>Male</b> applicants.<br> Minimum of <b>5</b> years working experience is required for this position<br> </div> </div> <div> <div> <b>Additional Qualifications:</b> </div> <div> <p> <strong>Safety Observation</strong> </p> <ul> <li> Raise SO in CMMS when found during shift.</li> </ul> <p> <strong>Security Rounds:</strong> </p> <ul> <li> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li> </ul> <p> <strong>Safety Check:</strong> </p> <ul> <li> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</li> <li> Ensure all safety signage is visible and up-to-date.</li> </ul> <p> <strong>Emergency Response</strong> </p> <ul> <li> Respond to emergencies, such as equipment failures, fires, or spills.</li> </ul> <p> <strong>PTW System</strong> </p> <ul> <li> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li> </ul> <p> <strong>Equipment Line Up / LOTO</strong> </p> <ul> <li> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li> </ul> <p> <strong>Equipment Inspection:</strong> </p> <ul> <li> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</li> <li> Check lubrication levels and perform routine lubrication as needed.</li> </ul> <p> <strong>Parameter Monitoring:</strong> </p> <ul> <li>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li> </ul> <p> <strong>System Startup:</strong> </p> <ul> <li> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li> </ul> <p> <strong>System Shutdown:</strong> </p> <ul> <li> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li> </ul> <p> <strong>Alarm &amp; Event (A&amp;E) Analysis</strong> </p> <ul> <li> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li> </ul> <p> <strong>Shift Handover:</strong> </p> <ul> <li> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</li> <li> Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li> </ul> <p> <strong>Plant Optimization</strong> </p> <ul> <li> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li> </ul> <p> <strong>Troubleshooting and Maintenance:</strong> </p> <ul> <li> Respond to any alarms or alerts and take necessary corrective actions.</li> <li> Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</li> <li> Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li> </ul> <p> <strong>Defect Management</strong> </p> <ul> <li> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li> </ul> <p> <strong>Monitoring of Chemical Treatment Systems</strong> </p> <ul> <li> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li> </ul> <p> <strong>Others and Extras</strong> </p> <ul> <li> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</li> <li> Occasionally attend site visits by visitors or contractors.</li> <li> Perform any other duty as assigned by the Plant Operations Supervisor</li> </ul> </div> </div> <div><p><br></p></div>

General Information<br><br><strong>Ref #</strong> 228872<br><br><strong>Location:</strong> Qatar-Doha<br><br><strong>Job family:</strong> Engineering<br><br><strong>Closing Date:</strong> 2026-10-27<br><br><strong>Description<br><br></strong>As a Licensed Aircraft Engineer, Level 2 – Engine Facility, you will be responsible to deliver off wing engine maintenance and rework activities with in their license authority. To support engine LRU build-up, Module Removal /Installations, Borescope Inspections, engine preservation /storage, receipt/ dispatch inspections, shipping and management of spare engine. To ensure the maintenance tasks are performed in an efficient and timely manner with low TAT to support QTR engine operation.<br><br><strong>Operational Accountabilities;<br><br></strong><ul><li>Exercising his license/approval in relation to the Accomplishment of scheduled, unscheduled BSIs to support smooth operation of Qatar Airways aircraft engines.</li><li>Advising the Supervisor of any impending service disruptions, problems or areas of concern that may have an impact on the operating program.</li><li>To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation.</li><li>Perform engine/APU receipt inspections, dispatch inspections, engine transportations, fan split / mate, LRU build up, module removal / Installations and certifications to achieve on time targets of spare engine/APU production operation.</li><li>To use all available resources at disposal to ascertain that all maintenance including casualties on QR Aircraft engines is carried out to the highest possible Maintenance Standards and Safety in the most productive/proactive and cost-effective manner.</li><li>Ensure work processes are effective by complying QR work procedures and standards to improvements are required to engine maintenance.</li><li>Ascertain effective performance of tasks by checking engine maintenance tasks are accomplished in accordance with laid down policies and procedures of given time frame.</li><li>Meet scheduled requirements by maintaining component serviceability standards and implement solutions to engine technical problems.</li><li>Ensure scheduled/unscheduled tasks are performed to meet company’s set standards and targets in an efficient airworthiness manner.</li><li>Responsible for maintenance of various types of engines and configurations as per approved aircraft maintenance procedure manuals.</li><li>Maintaining engines as RFI (ready for installation) to meet planned targets of all scheduled /unscheduled engine changes.</li><li>Ensuring shift handover is in place and updated as per TPM.</li><li>Complying to update handover data base on every shift work pattern.</li><li>Liaising with data base group to ensure all data are up date to comply with technical network file server policy.</li><li>Maintaining the Engine Release to service authorization privilege are up date as per TPM and QCAA.</li><li>Perform other department duties related to his/her position as directed by the Head of the Department.<br><br></li></ul><strong>Be part of an extraordinary story<br><br></strong>Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.<br><br>Join us as we dare to achieve what’s never been done before.<br><br>Qualification<br><br><ul><li>Bachelor’s Degree or Equivalent with Minimum 4 years of job-related experience.</li><li>Holds minimum 2 engine type approvals or borescope approvals.</li><li>Minimum of 5 years of job-related aircraft certifying experience.</li><li>Borescope inspection and QEC/LRU build up experience of V2500, Trent 500, Trent 700, Trent XWB, GE CF6-80E1, GE90, GENX, GP7000, PW4158, PW1000 engines. (Minimum two QTR engine type experience).</li><li>Ability to retrieve and read data from Technical Publications.</li><li>Sound knowledge of air legislation.</li><li>Determining the kind of tools and equipment needed to do a job.</li><li>Using mathematics to solve problems.</li><li>Controlling operations of equipment or systems.</li><li>Excellent knowledge of computer software, specifically MS Office and Adobe acrobat.</li><li>Good understanding of Airbus and Boeing Aircraft Maintenance Manuals with reference to limitations.<br><br></li></ul><strong>About Qatar Airways Group<br><br></strong>Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.<br><br>Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.<br><br>https://aa115.taleo.net/careersection/QA_External_CS/jobapply.ftl?lang=en&amp;job=228872

Job Summary<br><br>To ensure upkeep of operational soundness of a branch in conjunction with the strategic objectives of obtaining satisfactory audit ratings by complying to Bank SOPs & QCB regulations.<br><br>Provide the necessary Operational support to the team to ensure a high level of service delivery efficiency resulting in to enhanced Client experience.<br><br>Key Accountabilities<br><br>Branch Management<br><br> Ensure efficiency in branch operations that supports the Client experience objective<br><br> Ensure continued compliance with operating procedures, policies, process flows and service level agreements by carrying out random spot checks. Coordinate with branches, departments, and risk management with regard to referrals<br><br> Ensure the control function checklists are completed daily by jobholder and his/her subordinates Ensure completion of all financial and non-financial transactions/amendments passed during the day and approve/reject documents forwarded via documented scanner<br><br> Responsible for premises issues and control branch registers (Key, physical, dispute & dispatch registers)<br><br> Custodian of vault cash, managers cheques & rechecking of teller activities<br><br> Responsible for branch opening and closing and security alarms and ensuring that the branch literature displays and branding in the branch meet bank criteria<br><br> Receive customer complaints and liaise with appropriate departments and ensure resolution<br><br> Monitor incidents of Money Laundering while opening the new accounts and daily transactions Provide proper handling of branch communication with other departments to ensure smooth workflow and within TAT<br><br> Ensure the teams’ compliance to regulatory requirements by providing the necessary training and refresher sessions for branch staff<br><br> Assist and replace BM during leave & absence.<br><br>Supervision of Subordinates<br><br> Organize and supervise the activities and work of subordinates to ensure that all work within a specific area of the activity is carried out in an efficient manner which is consistent with operating procedures and policy.<br><br> Provide on-the-job training and constructive feedback to subordinates to support their overall development.<br><br>Other Accountabilities<br><br>Branch Value Proposition<br><br> Check, monitor branch literature displays/branding instrument, and request installation of new materials (if necessary), in order to ensure compliance against set CBQ branch guidelines.<br><br>Branch Management<br><br> Recommend manpower staffing for branch team under this position’s area of responsibility based on set CBQ branch target and mission statement, in order to ensure that branch manpower needs are sufficiently addressed.<br><br> Manage and supervise all operational activities occurring within branch premise (such as but not limited to opening and closing of branch premise, security alarm, and branch registers control), in order to ensure integrity of CBQ branch premise.<br><br> Manage and supervise all financial and non-financial transactions/ amendments passed during the day (including but not limited to fax instruction checking, custodian of vault cash and approving/rejecting documents forwarded via document scanner), in order to ensure compliance to CBQ branch operation standard and guideline.<br><br>Branch Performance Management<br><br> Motivate employees and ensure their performance is evaluated according to policies and procedures, in order to drive performance culture within CBQ branch team.<br><br>Branch Customer Service<br><br> Receive, allocate and inspect CBQ branch customer complaint and query management, in order to ensure speedy and effective resolution to complaints and or queries.<br><br> Implement branch initiatives to promote self-service channels by encouraging staff to educate customer use of alternative channels (ATMs, POS, Call Centre, SMS, IVR, Bank Direct etc), in order to drive profitability to optimization of services.<br><br>Branch Capability Building<br><br> Conducting recruitment for new employees when needed and arrange trainings and capability development programs for new joiners, in order to provide smooth on boarding program for the employees.<br><br> Coach, give feedback and review capability of branch staffs, in order to ensure that the team’s capabilities are able to drive business performance target.<br><br>Branch Reporting<br><br> Create periodic and or ad-hoc reports for branch manager, in order to provide visibility on the team’s achievement against established business target.<br><br>Change Management<br><br> Lead and direct the management of change through continuous improvement of departmental systems, processes and practices taking into account ‘international leading practice’, changes in international standards and changes in the business environment which demand proactive action plans.<br><br>Policies, Systems, Processes and Procedures<br><br> Develop and oversee the implementation of functional policies, procedures and controls in order to ensure that all activities are conducted in compliance with risk, audit, and regulatory requirements while delivering a quality, cost-effective service.<br><br>Quality, Health, Safety, and Environment<br><br> Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.<br><br>MIS and Reports<br><br> Ensure that all departmental reports are prepared timely and accurately and meet CBQ department requirements, policies and standards.<br><br>Education<br><br>Bachelor’s Degree, preferably in business administration, finance, economics or a related subject

Job Summary<br><br>To ensure upkeep of operational soundness of a branch in conjunction with the strategic objectives of obtaining satisfactory audit ratings by complying to Bank SOPs & QCB regulations.<br><br>Provide the necessary Operational support to the team to ensure a high level of service delivery efficiency resulting in to enhanced Client experience.<br><br>Key Accountabilities<br><br>Branch Management<br><br> Ensure efficiency in branch operations that supports the Client experience objective<br><br> Ensure continued compliance with operating procedures, policies, process flows and service level agreements by carrying out random spot checks. Coordinate with branches, departments, and risk management with regard to referrals<br><br> Ensure the control function checklists are completed daily by jobholder and his/her subordinates Ensure completion of all financial and non-financial transactions/amendments passed during the day and approve/reject documents forwarded via documented scanner<br><br> Responsible for premises issues and control branch registers (Key, physical, dispute & dispatch registers)<br><br> Custodian of vault cash, managers cheques & rechecking of teller activities<br><br> Responsible for branch opening and closing and security alarms and ensuring that the branch literature displays and branding in the branch meet bank criteria<br><br> Receive customer complaints and liaise with appropriate departments and ensure resolution<br><br> Monitor incidents of Money Laundering while opening the new accounts and daily transactions Provide proper handling of branch communication with other departments to ensure smooth workflow and within TAT<br><br> Ensure the teams’ compliance to regulatory requirements by providing the necessary training and refresher sessions for branch staff<br><br> Assist and replace BM during leave & absence.<br><br>Supervision of Subordinates<br><br> Organize and supervise the activities and work of subordinates to ensure that all work within a specific area of the activity is carried out in an efficient manner which is consistent with operating procedures and policy.<br><br> Provide on-the-job training and constructive feedback to subordinates to support their overall development.<br><br>Other Accountabilities<br><br>Branch Value Proposition<br><br> Check, monitor branch literature displays/branding instrument, and request installation of new materials (if necessary), in order to ensure compliance against set CBQ branch guidelines.<br><br>Branch Management<br><br> Recommend manpower staffing for branch team under this position’s area of responsibility based on set CBQ branch target and mission statement, in order to ensure that branch manpower needs are sufficiently addressed.<br><br> Manage and supervise all operational activities occurring within branch premise (such as but not limited to opening and closing of branch premise, security alarm, and branch registers control), in order to ensure integrity of CBQ branch premise.<br><br> Manage and supervise all financial and non-financial transactions/ amendments passed during the day (including but not limited to fax instruction checking, custodian of vault cash and approving/rejecting documents forwarded via document scanner), in order to ensure compliance to CBQ branch operation standard and guideline.<br><br>Branch Performance Management<br><br> Motivate employees and ensure their performance is evaluated according to policies and procedures, in order to drive performance culture within CBQ branch team.<br><br>Branch Customer Service<br><br> Receive, allocate and inspect CBQ branch customer complaint and query management, in order to ensure speedy and effective resolution to complaints and or queries.<br><br> Implement branch initiatives to promote self-service channels by encouraging staff to educate customer use of alternative channels (ATMs, POS, Call Centre, SMS, IVR, Bank Direct etc), in order to drive profitability to optimization of services.<br><br>Branch Capability Building<br><br> Conducting recruitment for new employees when needed and arrange trainings and capability development programs for new joiners, in order to provide smooth on boarding program for the employees.<br><br> Coach, give feedback and review capability of branch staffs, in order to ensure that the team’s capabilities are able to drive business performance target.<br><br>Branch Reporting<br><br> Create periodic and or ad-hoc reports for branch manager, in order to provide visibility on the team’s achievement against established business target.<br><br>Change Management<br><br> Lead and direct the management of change through continuous improvement of departmental systems, processes and practices taking into account ‘international leading practice’, changes in international standards and changes in the business environment which demand proactive action plans.<br><br>Policies, Systems, Processes and Procedures<br><br> Develop and oversee the implementation of functional policies, procedures and controls in order to ensure that all activities are conducted in compliance with risk, audit, and regulatory requirements while delivering a quality, cost-effective service.<br><br>Quality, Health, Safety, and Environment<br><br> Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.<br><br>MIS and Reports<br><br> Ensure that all departmental reports are prepared timely and accurately and meet CBQ department requirements, policies and standards.<br><br>Education<br><br>Bachelor’s Degree, preferably in business administration, finance, economics or a related subject

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Al Najada Doha Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Job Description<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

Job Location:<br><br>Souq Waqif Boutique Hotel By Tivoli<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Like all members of the kitchen team, the Commis Chef must maintain high standards of health and safety, including personal hygiene. You will be responsible for producing the most creative and excellent dishes, ensuring that the guests expectations are exceeded and fully satisfied. The person in this position must be able to effectively communicate with other members of the kitchen team, this includes being able to gracefully receive constructive criticism as well as effectively carry out orders. Additionally, a Commis Chef also needs to be able to remain calm while multi-tasking, as they are often called upon to carry out many different orders simultaneously in a brief amount of time. The Commis Chef is a part of the kitchen team, and as such must be able and willing to perform the basic tasks of food preparation and organization in the kitchen. This ability to create excellence in your own area of responsibility and to support others as they do the same is vital to the successful operation of the kitchen and to ensure the enjoyment of guests.<br><br>Qualifications<br><br> High School degree Previous experience in a Food & Beverage/Restaurant operations role Passion for teamwork Excellent guest service skills Knowledge of basic preparation, presentation and preservation of food Basic knowledge of hygiene and safety procedures<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!