Mechanical technician Jobs in Qatar
84 Jobs Found
Save and set alert for similar positionsManage alerts
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Responsibilities:</strong></p><br><br>
<p>• Adhere to quality, health & safety, information security, and business continuity policies and procedures.<br>
• Install, maintain, repair, and overhaul mechanical equipment, machinery, and components according to<br>
technical specifications and approved procedures.<br>
• Perform preventive, corrective, breakdown, and shutdown maintenance for mechanical systems to minimize<br>
downtime and extend equipment life.<br>
• Inspect mechanical systems and components to identify wear, defects, misalignment, leaks, and potential<br>
failures.<br>
• Conduct troubleshooting and fault diagnosis on rotating equipment, ship unloaders, conveyors, gearboxes,<br>
bearings, and related systems.<br>
• Perform mechanical adjustments, alignments, replacements, and assembly/disassembly of components as<br>
required.<br>
• Safely and effectively use mechanical tools, measuring instruments, lifting equipment, and workshop<br>
machinery.<br>
• Test repaired and maintained equipment to ensure operational efficiency, reliability, and compliance with<br>
safety standards.<br>
• Read and interpret mechanical drawings, equipment manuals, and maintenance procedures.<br>
• Maintain accurate maintenance records and submit daily work completion reports, checklists, and related<br>
documentation to the supervisor.<br>
• Report maintenance issues and completed work activities to superiors.<br>
• Maintain proper housekeeping in the work area, ensuring tools and equipment are clean, safe, and properly<br>
stored after use.<br>
• Promptly report near misses, hazards, and safety incidents to superiors.</p><br><br>
<p><strong>Requirements:</strong></p><br><br>
<p>• Diploma in Mechanical Engineering with minimum of four (4) years of relevant industrial experience, or Vocational<br>
training (ITI) certificates in Mechanical with minimum six (6) years of relevant industrial experience is preferred.<br>
• Basic command of English language is preferred.<br>
• Welding certification is an added advantage.</p><br><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Key Responsibilities</strong></p><br><br><p>* Carry out preventive and corrective maintenance on mechanical equipment.</p><br><br><p>* Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><br><br><p>* Maintain RO plant equipment including: High-pressure pumps</p><br><br><p>1. Booster pumps</p><br><br><p>2. Pressure vessels</p><br><br><p>3. RO skids and membranes</p><br><br><p>4. Filters and strainers</p><br><br><p>5. Chemical dosing systems</p><br><br><p>6. Valves and actuators</p><br><br><p>7. Heat exchangers</p><br><br><p>8. Cranes and lifting equipment</p><br><br><br><p>* Perform equipment alignment, lubrication, and condition monitoring.</p><br><br><p>* Participate in commissioning, startup, and shutdown activities.</p><br><br><p>* Assist in root-cause analysis of equipment failures.</p><br><br><p>* Complete maintenance reports and update CMMS/work orders.</p><br><br><p>* Coordinate with operations, electrical, and instrumentation teams.</p><br><br><p>* Follow permit-to-work procedures and HSE requirements.</p><br><br><p>* Respond to emergency breakdowns and plant call-outs when required.</p><br><br><br><p><strong>Required Qualifications</strong></p><br><br><p>* Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p><br><br><p>* 3-5 years (or more) experience in desalination, water treatment, power plants, oil & gas, or industrial facilities.</p><br><br><p>* Experience with RO desalination systems is preferred.</p><br><br><p>* Knowledge of rotating and static equipment maintenance.</p><br><br><p>* Ability to read mechanical drawings, P&IDs, and technical manuals.</p><br><br><p>* Familiarity with maintenance management systems (CMMS).</p><br><br><br><p><strong>Mechanical Technician's Key skills:</strong></p><br><br><p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p><br><br><p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p><br><br><p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p><br><br><p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p><br><br><p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p><br><br><p>6. Working experience with PVDF and CPVC materials.</p><br><br><p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p><br><br><br>
<br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><span>Mechanical Technician</span><br><span>Responsibilities</span><br></span><ul><li><span>Perform preventive, corrective, and breakdown maintenance on mechanical equipment in power generation and water desalination plants.</span><br></li><li><span>Inspect, troubleshoot, repair, and overhaul pumps, compressors, turbines, valves, gearboxes, heat exchangers, and associated equipment.</span><br></li><li><span>Maintain rotating and static equipment, including bearings, seals, couplings, piping systems, and lubrication systems.</span><br></li><li><span>Carry out equipment dismantling, installation, alignment, testing, and commissioning activities.</span><br></li><li><span>Support planned shutdowns, plant overhauls, and emergency maintenance activities.</span><br></li><li><span>Diagnose mechanical faults and recommend appropriate corrective actions.</span><br></li><li><span>Read and interpret mechanical drawings, P&IDs, equipment manuals, and maintenance procedures.</span><br></li><li><span>Record maintenance activities, inspection findings, spare-parts usage, and equipment conditions.</span><br></li><li><span>Follow Permit-to-Work, lockout/tagout, confined-space, and other plant safety procedures.</span><br></li><li><span>Coordinate with operations, engineering, and other maintenance teams.</span><br></li><li><span>Maintain tools, equipment, and work areas in safe and orderly condition.</span><br></li><li><span>Comply with QEWC site procedures, quality standards, and HSE requirements.</span><br></li></ul><br><span>Requirements<span>Requirements</span><br></span><ul><li><span>ITI, Diploma, or technical qualification in Mechanical Engineering or a related discipline.</span><br></li><li><span>Minimum 5 years of mechanical maintenance experience in power generation, water desalination, oil and gas, petrochemical, or heavy industrial plants.</span><br></li><li><span>Strong experience with pumps, compressors, turbines, valves, gearboxes, heat exchangers, and piping systems.</span><br></li><li><span>Hands-on knowledge of equipment alignment, bearing replacement, seal replacement, lubrication, and mechanical fitting.</span><br></li><li><span>Experience in preventive maintenance, fault diagnosis, shutdowns, and major plant overhauls.</span><br></li><li><span>Ability to read mechanical drawings, P&IDs, technical manuals, and equipment specifications.</span><br></li><li><span>Familiarity with PTW, LOTO, confined-space entry, toolbox talks, and industrial HSE procedures.</span><br></li><li><span>Ability to use precision measuring instruments, alignment tools, and mechanical maintenance equipment.</span><br></li><li><span>Good English communication and basic computer skills.</span><br></li><li><span>Previous Gulf, power plant, or desalination plant experience is preferred.</span><br></li><li><span>Must be medically fit and able to work shifts and in demanding plant conditions.</span><br></li></ul>Interested candidates can send cv to 31313903/ bency@madre-me.com<br><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Key Responsibilities</strong></p><br><br><p>* Carry out preventive and corrective maintenance on mechanical equipment.</p><br><br><p>* Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><br><br><p>* Maintain RO plant equipment including: High-pressure pumps</p><br><br><p>1. Booster pumps</p><br><br><p>2. Pressure vessels</p><br><br><p>3. RO skids and membranes</p><br><br><p>4. Filters and strainers</p><br><br><p>5. Chemical dosing systems</p><br><br><p>6. Valves and actuators</p><br><br><p>7. Heat exchangers</p><br><br><p>8. Cranes and lifting equipment</p><br><br><br><p>* Perform equipment alignment, lubrication, and condition monitoring.</p><br><br><p>* Participate in commissioning, startup, and shutdown activities.</p><br><br><p>* Assist in root-cause analysis of equipment failures.</p><br><br><p>* Complete maintenance reports and update CMMS/work orders.</p><br><br><p>* Coordinate with operations, electrical, and instrumentation teams.</p><br><br><p>* Follow permit-to-work procedures and HSE requirements.</p><br><br><p>* Respond to emergency breakdowns and plant call-outs when required.</p><br><br><br><p><strong>Required Qualifications</strong></p><br><br><p>* Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p><br><br><p>* 3-5 years (or more) experience in desalination, water treatment, power plants, oil & gas, or industrial facilities.</p><br><br><p>* Experience with RO desalination systems is preferred.</p><br><br><p>* Knowledge of rotating and static equipment maintenance.</p><br><br><p>* Ability to read mechanical drawings, P&IDs, and technical manuals.</p><br><br><p>* Familiarity with maintenance management systems (CMMS).</p><br><br><br><p><strong>Mechanical Technician's Key skills:</strong></p><br><br><p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p><br><br><p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p><br><br><p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p><br><br><p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p><br><br><p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p><br><br><p>6. Working experience with PVDF and CPVC materials.</p><br><br><p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p><br><br><br><p><strong>Commissioning Experience</strong></p><br><br><p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p><br><br><p>* <strong>Inspection: </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p><br><br><p>* <strong>Commissioning: </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p><br><br><p>* <strong>Troubleshooting: </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p><br><br><p>* <strong>Repair & Maintenance: </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p><br><br><p>* <strong>Overhauling: </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p><br><br><p>* <strong>Piping Systems: </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p><br><br><br>
<br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Apache Mechanical Technician – General</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Qatar Incorporated<br><br><p>Boeing Global Service is seeking an <b>Apache Mechanical Technician - General</b> to join the AH-64 Qatar Air Force Maintenance Augmentation Team (MAT) located at <b>Al Udeid Air Base, Qatar</b>.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>Performs AH-64E aircraft maintenance tasks and performs air crew-member duties as required using the QAF specific AH-64E IETM, AH-64E Operators Manual, AH-64E Maintenance Test Flight Manual, and AH-64E Check List Manual.</p><br><br></li><li><p>Removes and installs aircraft systems and subsystem assemblies and components including engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Services and lubricates aircraft systems, subsystems, and components.</p><br><br></li><li><p>Prepares aircraft for inspections and maintenance checks.</p><br><br></li><li><p>Performs scheduled and unscheduled aircraft maintenance actions.</p><br><br></li><li><p>Uses common measuring tools, precision measuring gauges and alignment fixtures.</p><br><br></li><li><p>Performs aircraft and related components routine and special inspections.</p><br><br></li><li><p>Performs maintenance operational checks.</p><br><br></li><li><p>Diagnoses and solves problems aircraft subsystems using special tools and equipment as required.</p><br><br></li><li><p>Uses and performs operator maintenance on tools, special tools, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</p><br><br></li><li><p>Prepares aircraft maintenance forms and records. Provide OJT, coaching, and mentorship to the QAF personnel in the use of all applicable technical publications, tools, test equipment, AGSE, PGSE, and special equipment applicable to the subject area of aircraft maintenance, enabling them to become effective AH-64E aircraft mechanics.</p><br><br></li><li><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to accurate failures or implement changes.</p><br><br></li><li><p>Coordinates assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment.</p><br><br></li><li><p>Fixes complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</p><br><br></li><li><p>Performs validation/verification testing of systems and components.</p><br><br></li><li><p>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</p><br><br></li><li><p>Inspects components and verifies repairs for flight worthiness requirements.</p><br><br></li><li><p>Coordinates training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li><li><p>Travel on short notice.</p><br><br></li><li><p>Travel both domestically and internationally.</p><br><br></li></ul><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>6+ years of experience with the AH-64D, or AH-64E, aircraft.</p><br><br></li><li><p>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) and with Enhanced Logbook Automation System (ELAS) entries.</p><br><br></li><li><p>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft maintenance course or civilian equivalent training. Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or their designated representative and/or the GFR as substitute.</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>Possess Airframe and Powerplant license or equivalent.</p><br><br></li><li><p>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Prior experience or qualified in another aviation maintenance field.</p><br><br></li><li><p>Prior experience working in the Southwest Asia/desert region.</p><br><br></li></ul><br><p><b>This requisition is for an international, locally hired position in Al-Udeid, Qatar. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Qatari law. Employment is subject to the candidate's ability to satisfy all Qatari labor and immigration formalities.</b></p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position does not require a Security Clearance.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Qatar)<br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Apache Mechanical Technician (Avionics)</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Qatar Incorporated<br><br><p><b>Job Description:</b></p><br><br><p>Boeing Global Service is seeking an <b>Apache Mechanical Technicians (Avionics)</b> to join the AH-64E Qatar Air Force Maintenance Augmentation Team (MAT) located at <b>Al Udeid Air Base, Qatar</b>.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>Performs maintenance on the AH-64E electrical/avionics/armament/fire control/radar/visionics/ASE systems and components associated with the QAF AH-64E using the QAF-specific AH-64E IETM, AH-64E Operators Manual, AH-64E Maintenance Test Flight Manual, and AH-64E Check List Manual.</p><br><br></li><li><p>Diagnoses and repairs aircraft systems and components malfunctions including solid state and transistorized devices according to the appropriate technical manuals, directives and safety procedures.</p><br><br></li><li><p>Performs scheduled and unscheduled aircraft maintenance actions, authorized modifications and alignment of AH-64E weapons components, fire control/radar units, sighting elements/visionics, ASE, electronic and mechanical devices, and instruments.</p><br><br></li><li><p>Uses common measuring tools necessary for performing the tasks described herein, precision measuring tools and alignment fixtures. Handles AH-64E aircraft ammunitions, performs weapon system loading/unloading, arming and de-arming, and weapon subsystems configuration changes for all AH-64E weapons and fire control systems within the scope of this SOW.</p><br><br></li><li><p>Performs aircraft systems operational checks.</p><br><br></li><li><p>Test, troubleshoots, and repair aircraft systems test sets and diagnostic equipment.</p><br><br></li><li><p>Assist the QAF in the requisition and maintenance of Shop and Bench stock items for repair of AH-64E armament, ASE, electrical, avionics, instrument, fire control, radar and visionic systems.</p><br><br></li><li><p>Prepares aircraft for inspections and maintenance checks.</p><br><br></li><li><p>Diagnoses and solves problems aircraft subsystems using special tools and equipment as required.</p><br><br></li><li><p>Uses and performs operator maintenance on tools, special tools, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</p><br><br></li><li><p>Prepares aircraft maintenance forms and records. Provide OJT, coaching, and mentorship to the QAF personnel in the use of all applicable technical publications, tools, test equipment, AGSE, PGSE, and special equipment applicable to the subject area of aircraft maintenance, enabling them to become effective AH-64E Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Coordinates training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li><li><p>Travel on short notice.</p><br><br></li><li><p>Travel both domestically and internationally.</p><br><br></li></ul><br><p><b>This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Al Udeid Air Base, Qatar.</b></p><br><br><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>5+ years of experience with the AH/64 D/E aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technician.</p><br><br></li><li><p>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) or a similar aviation maintenance management system.</p><br><br></li><li><p>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft avionics/armament/fire control/ASE maintenance course or civilian equivalent training. Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or his/her designated representative and/or the GFR as substitute.</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>3+ years ULLS-A(E) or a similar aviation maintenance management system.</p><br><br></li><li><p>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Prior experience or qualified in another aviation maintenance field.</p><br><br></li><li><p>Prior experience working in the Southwest Asia/desert region.</p><br><br></li></ul><br><p>At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. </p><br><br><p>The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. </p><br><br><p>The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.</p><br><br><br><p><b>This requisition is for an international, locally hired position in Al-Udeid, Qatar. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Qatari law. Employment is subject to the candidate's ability to satisfy all Qatari labor and immigration formalities.</b></p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position does not require a Security Clearance.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Qatar)<br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span></span><p><span>Requirements:</span><br></p><br><p><span>•</span><span> Diploma / ITI in Mechanical Engineering or related field.</span><br></p><br><p><span>•</span><span> Minimum 6 years of mechanical maintenance experience.</span><br></p><br><p><span>•</span><span> Experience in utilities, fertilizer, power plant, port, cement, mining, or heavy industrial plant.</span><br></p><br><p><span>Key Responsibilities:</span><br></p><br><p><span>•</span><span>*</span><b><b>Maintain cooling towers, boilers, air compressors, diesel engines, pumps, valves, and gearboxes</b></b><span>*</span><span>.</span><br></p><br><p><span>•</span><span> Maintain conveyors, reclaimers, ship loaders, storage tanks, and product handling systems.</span><br></p><br><p><span>•</span><span> Perform preventive, corrective, and breakdown maintenance.</span><br></p><br><p><span>•</span><span> Carry out equipment inspection, repair, alignment, and overhauling.</span><br></p><br><p><span>•</span><span> Follow PTW, LOTO, and HSE procedures.</span><br></p><br><p><span>•</span><span> Perform maintenance and troubleshooting of rotating and static mechanical equipment.</span><br></p><br><p><span>•</span><span> Maintain pumps, compressors, blowers, fans, turbines, valves, vessels, exchangers and piping.</span><br></p><br><p><span>•</span><span> Carry out equipment installation, removal and reinstallation activities.</span><br></p><br><p><span>•</span><span> Read and understand mechanical drawings, isometrics and datasheets.</span><br></p><br><p><span>•</span><span> Inspect work quality and rectify identified mechanical faults.</span><br></p><br><br> </div>
<strong>Summary: </strong> <br> <br>We are hiring a Mechanical Technician Desalination for infrastructure and water sector. The role will support the safe and reliable operation of a large-scale water treatment/desalination facility, with a particular focus on mechanical maintenance of RO systems, pumps, valves, rotating equipment, and associated plant machinery.<p></p> <p>The ideal candidate will have strong hands-on mechanical maintenance experience in desalination, water treatment, power generation, oil & gas, or other industrial environments, with experience troubleshooting and overhauling mechanical equipment.<br> <br> <strong>Key Responsibilities</strong> </p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil & gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p>
<strong>Key Responsibilities</strong> <p></p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> </p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil & gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p> <p> </p> <p> <strong>Commissioning Experience</strong> </p> <p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> <strong>Inspection:</strong> <strong> </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p> <p> <strong>Commissioning:</strong> <strong> </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p> <p> <strong>Troubleshooting:</strong> <strong> </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p> <p> <strong>Repair & Maintenance:</strong> <strong> </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p> <p> <strong>Overhauling:</strong> <strong> </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p> <p> <strong>Piping Systems:</strong> <strong> </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p>
Primary Purpose Of The Job<br><br>Carry out highly skilled maintenance, repair and overhaul of Rotary equipment and Minor/routine maintenance of static equipment installed at Qatar Energy Refinery process units i.e. Refinery 1 & 2, RFCC, Condensate Refinery, Utilities/Off sites, Tank Farm, Berth#6, BSV3 and Station C1 at Hamad Intl. Airport (HIA).<br><br>Required Experience And Skills<br><br>Minimum of level 5 in English communication skills (oral/written). Extensive knowledge of Mechanical Rotary equipment. Ability to work in a multinational environment. Minimum of 8 years experience in Refinery/Oil& Gas/Petrochemical plants. Must have experience in Pumps (Single & Multistage), Steam/Gas Turbines, centrifugal & Reciprocating Compressors, Turbo machinery etc. Capable of using computer for creating permits in RIS, preferably having knowledge & experience of using SAP & MS Office (Word & Excel)<br><br>Educational Qualifications<br><br>Qualified with a Diploma/Certificate in Mechanical Technology from a recognized institution.
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Job Responsibilities<br><br> * Perform diagnostic tests to identify vehicle malfunctions and accurately determine the root cause of issues.<br> * Conduct inspections of vehicles to assess their condition and identify potential future problems.<br> * Repair and replace malfunctioning or worn-out components, parts, and systems, such as engines, brakes, transmissions, suspension systems, and electrical systems.<br> * Perform routine maintenance tasks, including oil changes, tire rotations, and filter replacements.<br> * Conduct thorough vehicle system checks to ensure proper functionality and safety compliance.<br> * Utilize computerized diagnostic equipment to aid in troubleshooting and identifying complex issues.<br> * Collaborate with other team members to exchange knowledge and insights on repair techniques and best practices.<br> * Maintain a clean and organized work area, ensuring all tools and equipment are properly handled and stored.<br> * Collaborate with the parts department to source and order necessary replacement parts and materials.<br> * Keep up-to-date records of all maintenance and repair work performed on vehicles, including detailed notes on repairs, parts used, and labor hours.<br> * Maintain a clean and safe work environment, adhering to all safety protocols and regulations.<br> * Assist and provide guidance to less experienced mechanics or apprentices when needed.<br> * Ensure proper disposal of hazardous materials, such as used oil, coolant, and batteries, in accordance with environmental guidelines.<br> * Document all repairs and maintenance activities accurately and timely.<br> * Provide exceptional customer service by effectively communicating vehicle concerns and repair recommendations.<br> * Perform other department duties related to his/her position as directed by the Head of the Department<br><br>Qualifications<br><br>Automotive Service Excellence certification in relevant areas (e.g., brakes, engine repair, electrical systems)<br>Skills<br><br> * Basic computer skills for accessing service manuals, diagnostic software, and inventory systems.<br> * Strong mechanical aptitude, knowledge of automotive systems and components, ability to interpret technical diagrams and manuals, attention to detail, problem-solving skills.<br> * Excellent time management skills, willingness to stay updated with emerging automotive technologies and trends.<br><br>Education<br><br> * High school graduation<br> * Automotive Technology, Mechanical Engineering, or related field.<br>
</div><h2 class="h5">Skills</h2>
<div data-jb-field="skills">Job Responsibilities<br><br> * Perform diagnostic tests to identify vehicle malfunctions and accurately determine the root cause of issues.<br> * Conduct inspections of vehicles to assess their condition and identify potential future problems.<br> * Repair and replace malfunctioning or worn-out components, parts, and systems, such as engines, brakes, transmissions, suspension systems, and electrical systems.<br> * Perform routine maintenance tasks, including oil changes, tire rotations, and filter replacements.<br> * Conduct thorough vehicle system checks to ensure proper functionality and safety compliance.<br> * Utilize computerized diagnostic equipment to aid in troubleshooting and identifying complex issues.<br> * Collaborate with other team members to exchange knowledge and insights on repair techniques and best practices.<br> * Maintain a clean and organized work area, ensuring all tools and equipment are properly handled and stored.<br> * Collaborate with the parts department to source and order necessary replacement parts and materials.<br> * Keep up-to-date records of all maintenance and repair work performed on vehicles, including detailed notes on repairs, parts used, and labor hours.<br> * Maintain a clean and safe work environment, adhering to all safety protocols and regulations.<br> * Assist and provide guidance to less experienced mechanics or apprentices when needed.<br> * Ensure proper disposal of hazardous materials, such as used oil, coolant, and batteries, in accordance with environmental guidelines.<br> * Document all repairs and maintenance activities accurately and timely.<br> * Provide exceptional customer service by effectively communicating vehicle concerns and repair recommendations.<br> * Perform other department duties related to his/her position as directed by the Head of the Department<br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>About Four Seasons:</b></p><br><br><p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.<br>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p><br><br><br><br><p><b>About the location:</b></p><br><br>Indulge in a glamorous beachfront home at Four Seasons Resort and Residences at The Pearl-Qatar – offering a new Four Seasons experience in Doha. Whether for a short vacation or a long-term stay, enjoy residential comfort in our expansive apartments and residences, each with a full kitchen and breathtaking views of the city or sea. Connect to the lively social scene at our seven restaurants and bars, soon to showcase Joël Robuchon, and enrich your lifestyle at our Loulou Spa, the beach and pools. Intuitive Four Seasons service sets the new standard for luxury beachfront living in Doha.<br><br><p><span><b>About the location:</b></span></p><br><br><p><span>Indulge in a glamorous beachfront home at Four Seasons Resort and Residences at The Pearl-Qatar – offering a new Four Seasons experience in Doha. Whether for a short vacation or a long-term stay, enjoy residential comfort in our expansive apartments and residences, each with a full kitchen and breathtaking views of the city or sea. Intuitive Four Seasons service sets the new standard for luxury beachfront living in Doha.</span></p><br><br><p><span><b>Our Team:</b></span></p><br><br><p><span>Our team is our greatest asset and the key to our success. We demonstrate our beliefs in the way we treat each other and by the example we set for one another. In all our interactions with our guests, customers, business associates and colleagues, we seek to deal with others, as we would have them deal with us. Our team is built on mutual respect, collaboration, excellent service and passion.</span></p><br><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Carry out preventive and corrective maintenance of hotel mechanical equipment and systems.</li><li>Inspect, troubleshoot, repair, and maintain pumps, motors, generators, kitchen equipment, laundry equipment, and other mechanical machinery.</li><li>Respond promptly to maintenance requests and mechanical breakdowns throughout the hotel.</li><li>Conduct regular inspections to identify potential faults and prevent equipment failures.</li><li>Perform repairs, adjustments, and replacements of mechanical components as required.</li><li>Maintain tools, equipment, and spare parts in good working condition.</li><li>Ensure all maintenance work is completed safely and in accordance with hotel standards.</li><li>Maintain accurate records of maintenance activities and report major faults to the Engineering Supervisor.</li><li>Support the Engineering team with other maintenance tasks when required.</li></ul><br><p><b>Qualifications & Experience</b></p><br><br><ul><li>Technical qualification or certificate in Mechanical Engineering, Mechanical Maintenance, or a related field.</li><li>Minimum 2–3 years of experience as a Mechanic, preferably in a hotel, resort, or commercial property.</li><li>Good knowledge of mechanical systems, pumps, motors, machinery, and basic HVAC equipment.</li><li>Ability to troubleshoot mechanical faults and carry out repairs effectively.</li><li>Knowledge of preventive maintenance and workplace safety procedures.</li><li>Ability to work shifts, weekends, and public holidays when required.</li><li>Good communication, teamwork, and problem-solving skills.</li><li>Requires reading, writing and oral proficiency in the English language, Arabic is an asset</li></ul><br><p><span><b>What we offer: </b></span></p><br><br><p><span>Opportunities to build a successful career with global potential </span></p><br><br><p><span>Unique strong culture - diversity of 50 different nationalities </span></p><br><br><p><span>Living accommodation in a high quality, well-resourced apartment </span></p><br><br><p><span>Excellent Training and Development opportunities</span></p><br><br><p><span>Employee Recognition Programs </span></p><br><br><p><span>Complimentary nights at FS Hotels Worldwide </span></p><br><br><p><span>Paid home leave tickets </span></p><br><br><p><span>Complimentary meals in employee restaurants </span></p><br><br><p><span>Free transportation to work </span></p><br><br><p><span>Medical coverage </span></p><br><br><p><span><b>Work Authorization </b></span></p><br><br><p><span>Hotel will apply for the work authorization for a successful candidate.</span></p><br><br><br><br><br><br><br> </div>
Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>Responsibilities<br><br>Please note that this is not an exhaustive list of everything that needs to be done. Anantara employees always find new ways to look after the business, their guests, and their colleagues. Within this, the key responsibilities for this position are:<br><br>Maintain and updates marine vehicles record system of the resort. Supervises all repairs and maintenance of all systems and related equipment in a water base vehicle, such as but not limited to speedboat, dive boats, barge, whalers, rowing boat, pontoon boats, dhonis, etc. Attends to repair and maintenance of land based vehicle, such as golf cart, buggy, etc. when requested. Records all service & repair done for boats, vehicles and equipment & keeps log of spare parts used, ensuring proper operation of equipment. Attends to repair and maintenance of power house generators if requested. Attends to machinery maintenance requests when instructed to do so. Carry out Preventive Maintenance program. Carry out electric arc welding and oxy-acetylene welding if capable & is needed. Carry out minor fabrication work and metal work when required. Advices improvements to the present system in order to optimize the operating efficiency and economy of the said system. Ensure execution of Preventive Maintenance programs. Ensures implementation of Anantara policies, standards and procedures in relation to Engineering. Ensure execution of Maintenance Requests and give feedback to requesting department when job is done. Assist in the daily scheduling & weekly forecasting of all marine maintenance work. Participates in conducting Fire Prevention Training Programs. Supports and initiates programs for the improvement in procedures and the reduction of engineering costs. Maintain records of all-important information pertaining to operation of marine vehicles and Engineering staff on assigned duty. To ensure that the engineering services comply with established standard and quality. Ensure that pending work from is discussed in morning briefing. Determine cleanliness by inspection of engineering areas, marine workshop, to ensure that all the areas are clean and tidy at all time. Assist storekeeper to organize accurate ordering of spare parts. Supervise “hands-on” and co-ordinate to all engineering staff on their behalf if required. To co-ordinate with Assistant Chief Engineer to follow up daily work if required. Participates with Chief Engineer in review and makes recommendation on the annual Engineering budget. Ensure safety at work for all engineering staff. Attends to all types of repair and maintenance work in the resort premises including new additional/extensions to the resort or any other properties maintained by ANANTARA. To perform shift duties when assigned by Supervisor /Ass. Chief Engineer. Carry out and log marine meter reading on daily basis and reports any discrepancies noticed to the supervisor. Ensure that issued hand tools are kept in proper working order Records daily work activity on the daily work summary. When assigned with duty phone, to respond to requests appropriately. Attend the engineering daily morning briefing. Attends meeting or training sessions as required by management. Complies with ANANTARA Safety, Fire and Hygiene Policy and Procedures. Complies with Departmental Standards and Procedure (SOP). Participates with ANANTARA Environmental Program. Participates with the resort’s energy conservation program. Does all jobs or tasks assigned by supervisor or managers regarding engineering work Interacts – cooperates with others in the Engineering Department. Interacts and cooperates with resort contractors as directed Interacts with other departments when necessary to provide additional or specialized services for functions, promotions and festivities. Acts as Fire Brigade Team Member when assigned.<br><br>Qualifications<br><br>Qualifications<br><br>Preferrably male<br><br>With 2 to 5 years of experience in the same field<br><br>With good English communication skills<br><br>With good technical skills<br><br>With pleasing personality<br><br>Ability to handle pressure at work<br><br>Ability to multi-task<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong> QATAR | LUSAIL</strong></p><br><br>
<p>We are currently hiring for a project at <strong>Rawda Project, Lusail, Qatar</strong>. Open Positions</p><br><br>
<p><strong>1. Mechanical Engineer – 3 Positions</strong><br>
</p><br><br>
<p> <strong>Project Location:</strong> Rawda Project, Lusail, Qatar<br>
<strong>Contract Duration:</strong> 6 Months<br>
<strong>Working Hours:</strong> 7:00 AM – 5:00 PM </p><br><br>
<p><strong>Mobilisation:</strong> As soon as possible</p><br><br> Candidate Requirements <ul>
<li>
<p>Relevant experience in the respective position</p><br><br>
</li>
<li>
<p>Strong technical knowledge and practical project experience</p><br><br>
</li>
<li>
<p>Candidates available for <strong>immediate mobilisation</strong> will be preferred</p><br><br>
</li>
<li>
<p>Candidates should be willing to work in <strong>Lusail, Qatar</strong></p><br><br>
</li>
</ul><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><span>Mechanical Engineer</span><br><span>Responsibilities</span><br></span><ul><li><span>Plan and support mechanical maintenance, shutdown, installation, dismantling, and repair activities.</span><br></li><li><span>Assess mechanical equipment and piping systems, identify issues, and recommend practical solutions.</span><br></li><li><span>Review drawings, work procedures, material requirements, and piping modification plans.</span><br></li><li><span>Coordinate with supervisors, technicians, contractors, and clients to ensure safe, timely work completion.</span><br></li></ul><br><span>Requirements<span>Requirements</span><br></span><ul><li><span>Bachelor’s degree in Mechanical Engineering.</span><br></li><li><span>Minimum 5 years of relevant industrial or Oil & Gas experience.</span><br></li><li><span>Relevant Qatar experience in industrial maintenance, shutdowns, machinery installation and dismantling, and piping modifications.</span><br></li><li><span>Ability to read mechanical drawings, prepare technical reports, and follow site safety and quality procedures.</span><br></li></ul>Interested candidates can send cv to 31313903/ bency@madre-me.com<br><br><br> </div>
Location : Doha and Ras Laffan<br>In line with QNV 2030, the development of a sustainable Qatari workforce is one of the key priorities at Nakilat, so as to ensure Qatari Nationals are given the proper opportunity to develop their careers that would enable them to eventually take on positions of higher responsibility.<br>Nakilat provides job opportunities to Qatari Fresh Graduates, where comprehensive Individual Development Plan (IDP), is offered to selected candidates, with structured development plan, to gain on job training and prepare them to take up their future roles competitively.<br>If you are ambitious to work with one of the largest maritime industries, and meeting the following criteria, please click on the link to apply for this job.<br>Qualifications:Bachelor’s degree in Finance / Accounting ,Degree should be recognized by the Ministry of Education and Higher Education (QATAR). GPA 2.5 and above<br>Technical Qualification:Fluent in English language – IELTS level 6.0 (or equivalent) Computer literacy in MS Office (Word, Excel, Power Point, and Outlook). Excellent interpersonal skills and communication skills.<br>Sponsorship:Not Academically sponsored by another entity within Qatar.
Qualification & Experience (Essential)<br><br>Bachelor’s degree in Mechanical Engineering.15+ years in Oil & Gas, including 10+ years in design, construction, commissioning, and start?up, with at least 8 years as a Commissioning Engineer. Strong experience in FEED and EPIC projects, including review/approval of contractor deliverables. Proven expertise in pre?commissioning, commissioning, and start?up (CSU) of mechanical (static & piping) systems and packaged equipment. Experience in FAT/SAT, completions management systems, and offshore projects. Familiar with international codes and standards (ASME, API, ISO, etc.). Skilled in risk assessments (HAZOP/HAZID), system handover, and troubleshooting. Strong leadership, communication, contractor supervision, and coordination with operations teams. Good knowledge of HSE, quality, and project execution practices.<br><br>Primary Duties & Responsibilities (Essential)<br><br>Lead mechanical commissioning activities under Head of Commissioning for safe and efficient CSU delivery. Review engineering deliverables, participate in design reviews, FATs, and readiness workshops. Plan and execute mechanical completion, systemization, and commissioning packages. Oversee key activities: inspections, flushing, cleaning, leak testing, hydrotesting, and reinstatement. Verify P&IDs, ISOs, LoSH, and system handover documentation. Manage DFPV activities, inerting, preservation, and system readiness. Supervise contractors, monitor progress, and resolve technical issues. Conduct line walks, system handovers, integration checks, and performance testing. Coordinate with operations, maintenance, and safety teams, ensuring SIMOPS compliance. Manage punch lists, handover, and close-out activities. Ensure compliance with HSE standards and participate in safety studies (HAZOP, ENVID, etc.). Support team development and training.
To provide specialized mechanical engineering expertise that strengthens troubleshooting, integrity assurance, and lifecycle performance of mechanical systems across the fleet, ensuring safe, compliant, and reliable operations.<br>Mechanical Technical Governance & Standards<br>- Establish and maintain mechanical engineering standards aligned with OEM, Class, Flag State, and regulatory requirements<br>- Approve mechanical-related maintenance procedures, job plans, and work scopes in accordance with asset‑ management governance<br><br>- Monitor adherence to mechanical integrity standards across all rigs and escalate significant deviations to the Corporate Asset Manager / Head of Maintenance<br><br><br>Mechanical Equipment Reliability & Troubleshooting<br>- Lead advanced diagnostics and troubleshooting for critical mechanical systems (rotating equipment, engines, pumps, cranes, hydraulics)<br>- Guide rig-based teams in root‑ cause analysis and ensure corrective actions address underlying failure modes<br><br>- Partner with Technical Superintendents to resolve high‑ impact downtime events and validate recovery plans<br><br><br>Maintenance Strategy, Planning & Execution Oversight<br>- Review and recommend mechanical PM strategies, task lists, and maintenance intervals based on risk, performance history, and OEM requirements<br>- Validate CMMS job plans, BOMs, and planned maintenance workflows, ensuring data accuracy and consistency<br><br>- Ensure maintenance execution meets safety‑ critical system requirements and equipment performance standards<br><br><br>Mechanical Integrity, Certification & Compliance<br>- Conduct mechanical integrity audits covering pressure systems, lifting equipment, rotating machinery, and hydraulic components<br>- Verify and confirm certification currency for critical mechanical systems, and ensure compliance with class, flag state, API, and regulatory inspection requirements<br><br>- Identify mechanical risks, document non‑ conformities, and ensure timely completion of corrective actions<br><br><br>Projects, Modifications & Capital Improvements<br>- Provide technical direction for mechanical upgrades, overhauls, and CAPEX initiatives<br>- Review vendor proposals, engineering deliverables, and project scopes for compliance with technical standards<br><br>- Review and recommend approval of mechanical design changes and hardware modifications through the Management of Change (MOC) process<br><br><br>Spares, Lifecycle Management & Reliability Improvement<br>- Analyze critical spare requirements, obsolescence risks, and stock requirements with Supply Chain, Procurement and Planning<br>- Recommend fleetwide reliability improvements and lead initiatives to eliminate repeated mechanical failures<br><br>- Support long‑ term lifecycle planning and mechanical asset replacement recommendations<br><br><br>Technical Documentation, Reporting & Data Governance<br>- Ensure mechanical drawings, manuals, and certifications are maintained accurately within controlled repositories<br><br>- Issue mechanical integrity reports, audit findings, technical advisories, and troubleshooting summaries to Corporate Asset Manager / Head of Maintenance<br><br>- Maintain high quality data for mechanical assets within the CMMS and engineering records
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<ul>
<li>Liaise with the HSE Supervisor on safety related matters. Act as a safety leader.</li>
<li>Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement.</li>
<li>Assist functional supervisor in reviewing and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs.</li>
<li>Supervise all EPIC contractor's Static & Rotating equipment inspection & installation activities are based on approved engineering documentation and project schedule during the execution of construction activities.</li>
<li>Attend Requests for Inspections (RFIs) as per approved ITPs including Material Receiving Inspections in coordination with Lead Construction Supervisor and sign off relevant inspection and test reports / RFIs.</li>
<li>Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification.</li>
<li>Lead the construction contractor(s) on all mechanical aspects of the Static and Rotating Equipment installation works.</li>
<li>Supervise with EPIC contractor during execution of the Static (including internals) and Rotating Equipment installation, FAT, alignment Inspection, Punch Clearing, pressure testing, pre-commissioning and Re-instatement at site.</li>
<li>Manage and lead final mechanical completion inspections and punch closing.</li>
<li>Supervisor the Pre-Com activities to ensure safety and the quality of the completed work.</li>
<li>Lead the inspection activity with Vendor/Supplier at Site whenever required.</li>
<li>Participate in PSSR and provide support to Operations pre & start up activity where instructed.</li>
<li>Co-ordinate mobilization of contractors on site.</li>
<li>Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.</li>
<li>Good knowledge in reading and understanding P&ID, GA, Associate structural drawings, Equipment Layout & mechanical drawings and Manufacturer manual/Recommendations.</li>
<li>Maintain a daily record of progress (daily diary) noting special comments. Reports to Snr Supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.</li>
<li>Participate in development of as-built drawings/documentation.</li>
<li>Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing safety standards on the work site.</li>
<li>Liaise and report with the QA/QC Inspector on quality related matters.</li>
</ul><br><ul>
<li>Candidate Must possess a Degree or Diploma in Mechanical Engineering from an internationally recognized University.</li>
<li>Preferably having formal training in QA/QC functional aspects.</li>
<li>Candidate should have a minimum of 10 years overall experience in static and rotating equipment installation, including inspection coordination experience in the construction of midstream / downstream Oil & Gas facilities.</li>
<li>Experience as an EPIC Contractor supervisor is essential. Experience as a Client or PMC supervisor is preferred.</li>
<li>Current experience in State of Qatar industrial cities and/or other GCC countries is required.</li>
<li>Extensive knowledge of international and industry specific codes & standards, including ASME, ANSI, ISO, API, NFPA, SHELL DEP's, etc. Mechanical inspector certificates (API 510 & API 653) would be an advantage.</li>
<li>Extensive experience in coating systems and procedures, incl painting, galvanizing, wrapping, insulation, Refractory Lining etc. BGAS / API certification would be an advantage.</li>
<li>Extensive experience in Static and Rotating Equipment Installation, FAT, Alignment, Inspection, punch list clearing, pressure testing, pre-commissioning and mechanical completion inspections, etc.</li>
<li>Tie-in to live facilities, including testing and integration to existing systems,</li>
<li>Stage Inspection and Testing of Construction activities as per approved ITPs</li>
</ul><br><ul>
<li><strong>Salary:</strong><ul>
<li>Day Rate in QAR Plus Allowance</li>
</ul></li>
<li><strong>Work Schedule:</strong><ul>
<li>8 Hours / 5 Days</li>
</ul></li>
</ul>
<ul>
<li><strong>Duration:</strong>
<ul>
<li>2 years, renewable</li>
</ul>
</li>
<li><strong>Location:</strong>
<ul>
<li>Qatar</li>
</ul>
</li>
</ul> </div>
Receive email alerts for Mechanical technician Jobs in Qatar jobs
You can cancel your email alert at anytime