Mechanical Design Engineer Jobs in Qatar

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Must have more than 3 years experience in welding works in running Petrochemical or Power Generation industry.</p><p>Must have a good understanding of QA/QC and HSE compliance requirements.</p><p>Must be practicing proper care of welding material.</p><p>Must have experience in and be able to weld all carbon steel piping materials.</p><p>Must have experience in and be able to weld the common stainless steel types.</p><p>Must be aware of the different Heat Treatment and Stress Relieving requirements.</p><p>Must be able to judge whether a proper weld preparation is made.</p><p>Must be qualified for and be able to carry out welding with different techniques such as GMAW, GTAW, SMAW at all positions flat, vertical or overhead on plates and pipes according to ASME IX, 1G, 2G, 3G and 6G and shall be able to learn as per these.</p><p>Able to perform grinding applications using manual and power tools.</p><p>Must be able to read / interprets mechanical isometric drawings including weld requirement symbols.</p><p>Must have experience in and be able to weld plate material in Column or Vessel walls.</p><p>Must be able and willing to clean the work area.</p><p>For understanding the WPS, use of the correct consumables, processes, equipment and to carry out the welding in accordance with the WPS and instruction from the Welding Inspector/Foreman.</p><p>To use correct welding techniques and sequences in accordance with the procedure to minimize Heat effects on the work piece.</p><p>To perform works as requested by the company including working at height or confined areas.</p><p>For continual development and undertaking training in additional welding processes.</p><p>To clean the weld after welding and to mark the unique identification details on the job adjacent to the joint as required by the QC Department.</p><p>To assist Fabricators in the fit-up and assembly of the work piece.</p><p>To clean the work area after the completion of welding and roll back the welding cable on completion of duty every day.</p><p>To assist QC Engineer / Inspector and the Welding Foreman during procedure and welder qualification tests.</p><p>For conducting their activities / duties in a manner so as to minimize potential accidents / incidents to themselves, their colleagues or the companies equipment and facilities.</p><p>Responsible to adhere and follow the implemented Quality, Health, Safety and Environmental policy, objectives and procedures.</p><p>Responsible for his own safety and others safety working around him.</p><p><strong>Desired Candidate Profile</strong></p><p>Educational qualifications: Certified Welder or equivalent in a relevant discipline or standard based qualification or equivalent.</p>

<p>We are seeking a Junior Sales & Procurement Engineer to support the sales and procurement of oil and gas materials and equipment, particularly piping materials, valves, fittings, flanges, and related products. The candidate will assist in developing business opportunities, preparing quotations, sourcing materials, coordinating with suppliers and clients, and ensuring timely delivery of quality products at competitive prices. </p><ul><li><p>Support sales activities for oil and gas piping materials, valves, fittings, flanges, and related equipment.</p></li><li><p>Identify potential clients and business opportunities in Qatar and the GCC market.</p></li><li><p>Assist in preparing technical and commercial quotations, proposals, and tender documents.</p></li><li><p>Follow up with clients regarding enquiries, quotations, orders, and ongoing requirements.</p></li><li><p>Attend client meetings and participate in marketing and business-development activities.</p></li><li><p>Build and maintain professional relationships with existing and potential clients.</p></li><li><p>Review client enquiries, material requisitions, specifications, and datasheets.</p></li><li><p>Source suitable materials and equipment from approved local and international suppliers.</p></li><li><p>Prepare and issue RFQs to suppliers and obtain competitive quotations.</p></li><li><p>Compare suppliers’ technical and commercial offers and prepare bid comparison sheets.</p></li><li><p>Negotiate prices, delivery schedules, payment terms, and other commercial conditions under management guidance.</p></li><li><p>Coordinate with suppliers, logistics teams, and clients to ensure timely order processing and delivery.</p></li><li><p>Maintain accurate records of enquiries, quotations, purchase orders, supplier information, and client communications.</p></li><li><p>Monitor market trends, competitor activities, pricing, and product availability.</p></li><li><p>Ensure that supplied materials meet client specifications, applicable industry standards, and quality requirements.</p></li><li><p>Provide regular sales and procurement updates to management.</p></li><li><p>Perform other sales, procurement, and coordination duties assigned by management.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree or diploma in Mechanical Engineering, Petroleum Engineering, Industrial Engineering, Business Administration, Supply Chain Management, or a related field.</p></li><li><p>Minimum 2–3 years of relevant experience in sales and/or procurement within the oil and gas industry.</p></li><li><p>Practical knowledge of piping materials, valves, fittings, flanges, and related oil and gas products.</p></li><li><p>Previous experience in the Qatar or GCC oil and gas market is strongly preferred.</p></li><li><p>Basic understanding of technical specifications, material grades, and applicable oil and gas industry standards.</p></li><li><p>Experience in preparing quotations, RFQs, purchase orders, and commercial comparison sheets.</p></li><li><p>Good communication, negotiation, presentation, and customer-service skills.</p></li><li><p>Strong follow-up, coordination, and organizational abilities.</p></li><li><p>Proficiency in Microsoft Office applications.</p></li><li><p>Ability to work independently and as part of a team.</p></li><li><p>Valid Qatar driving licence is an advantage.</p></li><li><p>Local hire only. Candidates must currently be available in Qatar.</p></li></ul>

Senior Consultant / Project Manager – Ports & Marine<br><br>Location: Doha, Qatar<br><br>Primary Responsibilities<br><br>Manage studies and projects within the Ports & Marine service line. Act as a Senior Consultant in the delivery of Port Consulting and Engineering Services. Ensure technical quality through the implementation of best practices and continuous improvement initiatives. Promote cost reduction and productivity enhancement across projects. Conduct site visits, inspections, data gathering activities, and technical evaluations relevant to assigned work. Participate in design reviews and provide advice on technical design, drafting issues, and compliance requirements. Support the preparation of technical and commercial proposals. Maintain project cost and quality control in accordance with established project management procedures and standards.<br><br>Qualifications & Experience<br><br>Preferably 15+ years of relevant experience (minimum 10 years) within the Ports & Marine Engineering industry. At least 5 years of experience in a Project Manager capacity. Bachelor's Degree (Honours) in Civil Engineering or a related discipline. Chartered Engineer status or equivalent professional accreditation preferred. Excellent written and verbal communication skills in English. Strong project management capabilities, with relevant certifications being an advantage. Ability and willingness to travel within the Middle East region. Strong collaboration and stakeholder management skills. Proven ability to work effectively in multidisciplinary teams and deliver projects successfully.<br><br>Interested candidates are encouraged to send their CV to norniqmah.abkarim@airswift.com.

Senior Consultant / Project Manager – Ports & Marine<br><br>Location: Doha, Qatar<br><br>Primary Responsibilities<br><br>Manage studies and projects within the Ports & Marine service line. Act as a Senior Consultant in the delivery of Port Consulting and Engineering Services. Ensure technical quality through the implementation of best practices and continuous improvement initiatives. Promote cost reduction and productivity enhancement across projects. Conduct site visits, inspections, data gathering activities, and technical evaluations relevant to assigned work. Participate in design reviews and provide advice on technical design, drafting issues, and compliance requirements. Support the preparation of technical and commercial proposals. Maintain project cost and quality control in accordance with established project management procedures and standards.<br><br>Qualifications & Experience<br><br>Preferably 15+ years of relevant experience (minimum 10 years) within the Ports & Marine Engineering industry. At least 5 years of experience in a Project Manager capacity. Bachelor's Degree (Honours) in Civil Engineering or a related discipline. Chartered Engineer status or equivalent professional accreditation preferred. Excellent written and verbal communication skills in English. Strong project management capabilities, with relevant certifications being an advantage. Ability and willingness to travel within the Middle East region. Strong collaboration and stakeholder management skills. Proven ability to work effectively in multidisciplinary teams and deliver projects successfully.<br><br>Interested candidates are encouraged to send their CV to norniqmah.abkarim@airswift.com.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead HVAC Technician<br><br>Lead HVAC TechnicianCHVA09 - HVAC Foreman<p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><p><b>Responsibilities:&nbsp;</b></p><br><br><p>Provides leadership to cause the creation of processes required to fully execute the requirements of services and is responsible for the execution of HVAC mechanical services, quality, and cost. Directs the activities of HVAC mechanics. Installs, services, and repairs environmental-control and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Mounts compressor and condenser units on platform or floor, uses hand tools, follows blueprints or engineering specifications. Fabricates, assembles and installs ductwork and chassis parts using portable metalworking tools and welding equipment. Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses and small factory buildings.</p><br><br>Qualification:<ul><li>Diploma holder with 12+ year's experience in same field.</li></ul><br><p><span><b>Belong. Connect. Grow. with KBR!&nbsp;</b></span></p><br><br><br><br><br> </div>

<p><strong>STUDENTS WANTED</strong></p><p><strong>About the Role:</strong></p><p>Anabolic Mechanics is looking for a skilled and motivated 3D Modeling &amp; 3D Printer Operator to join our team. This is a part-time position for current students who enjoys working hands-on with 3D design, prototyping, and additive manufacturing.</p><p><br></p><p>The ideal candidate will be comfortable taking an idea from a digital 3D model through preparation, printing, testing, and refinement of the final physical part.</p><p><br></p><p><strong>Responsibilities:</strong></p><p>Create and modify 3D models for prototyping and production</p><p>Prepare 3D models for printing, including slicing and print setup</p><p>Operate and monitor 3D printers</p><p>Perform printer calibration, setup, cleaning, and basic maintenance</p><p>Troubleshoot failed prints and improve print quality</p><p>Perform basic post-processing and finishing of printed components</p><p><br></p><p><strong>Required Qualifications:</strong></p><p>Experience with 3D modeling / CAD software</p><p>Experience operating 3D printers</p><p>Understanding of slicing software</p><p>Ability to troubleshoot mechanical and printing-related issues</p><p>Comfortable working with tools, machines, and physical prototypes</p><p><br></p><p><strong>Preferred Qualifications:</strong></p><p>Experience with Fusion 360, SolidWorks, Blender, Rhino, or similar software</p><p>Experience with FDM/FFF 3D printing</p><p>Portfolio or examples of previous 3D modeling and 3D printing work</p><p><br></p><p>We are looking for students who are technically capable and excited to work on real-world products from concept through physical prototype.</p><p><br></p>

<p><strong>STUDENTS WANTED</strong></p><p><strong>About the Role:</strong></p><p>Anabolic Mechanics is looking for a skilled and motivated 3D Modeling &amp; 3D Printer Operator to join our team. This is a part-time position for current students who enjoys working hands-on with 3D design, prototyping, and additive manufacturing.</p><p><br></p><p>The ideal candidate will be comfortable taking an idea from a digital 3D model through preparation, printing, testing, and refinement of the final physical part.</p><p><br></p><p><strong>Responsibilities:</strong></p><p>Create and modify 3D models for prototyping and production</p><p>Prepare 3D models for printing, including slicing and print setup</p><p>Operate and monitor 3D printers</p><p>Perform printer calibration, setup, cleaning, and basic maintenance</p><p>Troubleshoot failed prints and improve print quality</p><p>Perform basic post-processing and finishing of printed components</p><p><br></p><p><strong>Required Qualifications:</strong></p><p>Experience with 3D modeling / CAD software</p><p>Experience operating 3D printers</p><p>Understanding of slicing software</p><p>Ability to troubleshoot mechanical and printing-related issues</p><p>Comfortable working with tools, machines, and physical prototypes</p><p><br></p><p><strong>Preferred Qualifications:</strong></p><p>Experience with Fusion 360, SolidWorks, Blender, Rhino, or similar software</p><p>Experience with FDM/FFF 3D printing</p><p>Portfolio or examples of previous 3D modeling and 3D printing work</p><p><br></p><p>We are looking for students who are technically capable and excited to work on real-world products from concept through physical prototype.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>We are seeking a Site Inspector (QA/QC) who will ensure that design, procurement, construction, testing, commissioning and handover activities comply with contract documents, approved drawings, project specifications, client standards, statutory regulations and the approved Quality Management System.</span></span></p><br><p><b><span><span>Key Responsibilities:</span></span></b></p><br><ul><li><span><span>Review and monitor the contractor’s Project Quality Plan, ITPs, method statements and quality procedures.</span></span></li><li><span><span>Review material submittals, technical submissions and manufacturers’ documents before procurement and installation.</span></span></li><li><span><span>Monitor inspections for:</span></span><ul><li><span><span>Architectural works</span></span></li><li><span><span>Structural works</span></span></li><li><span><span>Mechanical systems</span></span></li><li><span><span>Electrical and ELV systems</span></span></li><li><span><span>Fire-protection systems</span></span></li><li><span><span>Specialist systems</span></span></li></ul></li><li><span><span>Conduct regular site-quality inspections.</span></span></li><li><span><span>Identify quality deficiencies and issue site observations and NCRs.</span></span></li><li><span><span>Verify corrective and preventive actions.</span></span></li><li><span><span>Review Requests for Inspection, material-delivery inspections and factory-acceptance documentation.</span></span></li><li><span><span>Ensure that only approved materials and acceptable workmanship are incorporated into the project.</span></span></li><li><span><span>Monitor approved mock-ups, sample panels and benchmark installations.</span></span></li><li><span><span>Review laboratory test reports, third-party inspection reports, testing and commissioning procedures, TAB reports and integrated-system testing records.</span></span></li><li><span><span>Verify completion of snagging, de-snagging and punch-list activities before practical completion and final handover.</span></span></li><li><span><span>Participate in quality audits, progress meetings, technical coordination meetings and joint site inspections.</span></span></li><li><span><span>Maintain quality records, inspection registers, NCR logs, quality statistics and project documentation.</span></span></li><li><span><span>Assist with payment-application reviews by confirming the quality and completion status of executed works.</span></span></li><li><span><span>Promote continual improvement and ensure implementation of the Project Quality Management System throughout all project phases.</span></span></li></ul><br><span>Requirements</span><p><b><span><span>Requirements:</span></span></b></p><br><ul><li><span><span>Bachelor’s Degree in Civil Engineering.</span></span></li><li><span><span>ISO 9001 Lead Auditor or Internal Auditor certification is highly desirable.</span></span></li><li><span><span>Certified Quality Engineer or equivalent certification is an advantage.</span></span></li><li><span><span>Minimum 10 years of QA/QC experience in building-construction projects.</span></span></li><li><span><span>Minimum 5 years of experience in commercial office fit-out or high-end interior projects.</span></span></li><li><span><span>Proven experience in Design &amp; Build contracts.</span></span></li><li><span><span>Strong knowledge of:</span></span><ul><li><span><span>Project Quality Plans</span></span></li><li><span><span>ITPs and method statements</span></span></li><li><span><span>Material and shop-drawing reviews</span></span></li><li><span><span>RFIs and NCR management</span></span></li><li><span><span>Corrective and preventive actions</span></span></li><li><span><span>FAT and SAT</span></span></li><li><span><span>Testing and commissioning</span></span></li><li><span><span>TAB</span></span></li><li><span><span>Snagging and handover</span></span></li><li><span><span>Quality auditing and document control</span></span></li></ul></li><li><span><span>Qatar experience and familiarity with QCS, Qatar Civil Defense and local authority regulations.</span></span></li><li><span><span>Strong report-writing, analytical and documentation skills.</span></span></li><li><span><span>Proficiency in Microsoft Office.</span></span><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>We are seeking a Site Inspector (QA/QC) who will ensure that design, procurement, construction, testing, commissioning and handover activities comply with contract documents, approved drawings, project specifications, client standards, statutory regulations and the approved Quality Management System.</span></span></p><br><p><b><span><span>Key Responsibilities:</span></span></b></p><br><ul><li><span><span>Review and monitor the contractor’s Project Quality Plan, ITPs, method statements and quality procedures.</span></span></li><li><span><span>Review material submittals, technical submissions and manufacturers’ documents before procurement and installation.</span></span></li><li><span><span>Monitor inspections for:</span></span><ul><li><span><span>Architectural works</span></span></li><li><span><span>Structural works</span></span></li><li><span><span>Mechanical systems</span></span></li><li><span><span>Electrical and ELV systems</span></span></li><li><span><span>Fire-protection systems</span></span></li><li><span><span>Specialist systems</span></span></li></ul></li><li><span><span>Conduct regular site-quality inspections.</span></span></li><li><span><span>Identify quality deficiencies and issue site observations and NCRs.</span></span></li><li><span><span>Verify corrective and preventive actions.</span></span></li><li><span><span>Review Requests for Inspection, material-delivery inspections and factory-acceptance documentation.</span></span></li><li><span><span>Ensure that only approved materials and acceptable workmanship are incorporated into the project.</span></span></li><li><span><span>Monitor approved mock-ups, sample panels and benchmark installations.</span></span></li><li><span><span>Review laboratory test reports, third-party inspection reports, testing and commissioning procedures, TAB reports and integrated-system testing records.</span></span></li><li><span><span>Verify completion of snagging, de-snagging and punch-list activities before practical completion and final handover.</span></span></li><li><span><span>Participate in quality audits, progress meetings, technical coordination meetings and joint site inspections.</span></span></li><li><span><span>Maintain quality records, inspection registers, NCR logs, quality statistics and project documentation.</span></span></li><li><span><span>Assist with payment-application reviews by confirming the quality and completion status of executed works.</span></span></li><li><span><span>Promote continual improvement and ensure implementation of the Project Quality Management System throughout all project phases.</span></span></li></ul><br><span>Requirements</span><p><b><span><span>Requirements:</span></span></b></p><br><ul><li><span><span>Bachelor’s Degree in Civil Engineering.</span></span></li><li><span><span>ISO 9001 Lead Auditor or Internal Auditor certification is highly desirable.</span></span></li><li><span><span>Certified Quality Engineer or equivalent certification is an advantage.</span></span></li><li><span><span>Minimum 10 years of QA/QC experience in building-construction projects.</span></span></li><li><span><span>Minimum 5 years of experience in commercial office fit-out or high-end interior projects.</span></span></li><li><span><span>Proven experience in Design &amp; Build contracts.</span></span></li><li><span><span>Strong knowledge of:</span></span><ul><li><span><span>Project Quality Plans</span></span></li><li><span><span>ITPs and method statements</span></span></li><li><span><span>Material and shop-drawing reviews</span></span></li><li><span><span>RFIs and NCR management</span></span></li><li><span><span>Corrective and preventive actions</span></span></li><li><span><span>FAT and SAT</span></span></li><li><span><span>Testing and commissioning</span></span></li><li><span><span>TAB</span></span></li><li><span><span>Snagging and handover</span></span></li><li><span><span>Quality auditing and document control</span></span></li></ul></li><li><span><span>Qatar experience and familiarity with QCS, Qatar Civil Defense and local authority regulations.</span></span></li><li><span><span>Strong report-writing, analytical and documentation skills.</span></span></li><li><span><span>Proficiency in Microsoft Office.</span></span><br></li></ul><br> </div>

<p><strong>Job Purpose:</strong> </p><p><br></p><p>The Project Director - EPC Power provides end-to-end leadership for the delivery of large-scale engineering, procurement, and construction (EPC) projects within the power sector, including thermal, combined-cycle, renewable, and transmission and substation projects. The role is accountable for delivering projects safely, on schedule, within budget, and to the required technical and quality standards, while managing complex client, consortium, and regulatory relationships. The Project Director acts as the single point of accountability for project outcomes, balancing commercial, technical, and stakeholder demands across the full project lifecycle from contract award through commissioning and handover.</p><p><br></p><p><strong>Responsibilities:</strong></p><p><strong>End-to-End EPC Project Leadership</strong></p><p>Own the full delivery of power EPC projects from contract award through engineering, procurement, construction, commissioning, and handover, ensuring all phases are tightly integrated and aligned with the master project schedule. Act as the primary point of accountability to the client, joint venture partners, and internal leadership for overall project performance, proactively resolving cross-functional bottlenecks that threaten schedule or budget.</p><p><br></p><p><strong>Engineering &amp; Design Interface Management</strong></p><p>Direct the interface between engineering disciplines (civil, mechanical, electrical, I&amp;C) and construction teams to ensure design outputs are constructible, code-compliant, and aligned with owner's technical specifications. Drive timely resolution of design changes, technical queries, and interdisciplinary clashes to avoid downstream rework and schedule slippage on critical power generation and grid interconnection packages.</p><p><br></p><p><strong>Procurement &amp; Supply Chain Coordination</strong></p><p>Oversee procurement strategy and execution for major equipment packages, including turbines, generators, transformers, switchgear, and balance-of-plant systems, ensuring vendor selection, expediting, and logistics are managed to protect the critical path. Partner with the supply chain function to mitigate long-lead equipment risks and manage vendor quality and factory acceptance testing.</p><p><br></p><p><strong>Construction &amp; Commissioning Oversight</strong></p><p>Provide executive oversight of site construction activities, ensuring work fronts are sequenced efficiently, subcontractor performance is monitored against plan, and construction quality meets project specifications. Lead the transition into pre-commissioning and commissioning phases, coordinating with OEMs and commissioning teams to achieve reliable plant start-up and performance test completion.</p><p><br></p><p><strong>Cost Control, Schedule &amp; Commercial Management</strong></p><p>Maintain rigorous control over project cost and schedule baselines, driving earned value analysis, variance reporting, and corrective action planning to protect project margins. Oversee contract administration, variation orders, and claims management to safeguard the organization's commercial position throughout the project lifecycle.</p><p><br></p><p><strong>HSE &amp; Process Safety Leadership</strong></p><p>Champion a zero-harm safety culture across all project sites, ensuring rigorous adherence to HSE regulations, permit-to-work systems, and process safety requirements specific to high-voltage and high-pressure power infrastructure. Drive proactive hazard identification and incident prevention programs across all contractors and subcontractors on site.</p><p><br></p><p><strong>Client, Consortium &amp; Stakeholder Management</strong></p><p>Serve as the primary interface with the client, EPC consortium partners, financiers, and regulatory bodies, ensuring transparent reporting and timely resolution of issues that could impact project delivery. Build and maintain strong working relationships that support smooth project execution and position the organization for repeat business.</p><p><br></p><p><strong>Risk Management &amp; Contingency Planning</strong></p><p>Establish and maintain a comprehensive project risk register, proactively identifying technical, commercial, and schedule risks and implementing mitigation and contingency plans. Escalate material risks to senior leadership with clear recommendations to protect project outcomes and organizational reputation.</p><p><br></p><p><strong>Quality Assurance &amp; Regulatory Compliance</strong></p><p>Ensure all project deliverables comply with applicable grid codes, utility interconnection standards, and international engineering codes and standards. Strengthen QA/QC frameworks across engineering, procurement, and construction to ensure defect-free delivery and successful performance testing and handover to the client.</p><p><br></p><p><strong>Education Requirements:</strong></p><p>Bachelor's Degree in Electrical, Mechanical, or Civil Engineering, or a related discipline.</p><p>Master's Degree in Engineering Management, Project Management, or Business Administration is preferred.</p><p>PMP, PRINCE2, or equivalent project management certification is highly preferred</p><p><br></p><p><strong>Experience:</strong></p><p><br></p><ul><li>Minimum 15-18 years of experience delivering large-scale EPC power projects, including at least 6-8 years in a Project Director or senior project leadership role on thermal, combined-cycle, renewable, or transmission and substation projects.</li><li>Proven track record managing multi-disciplinary EPC teams and subcontractors through the full project lifecycle, from FEED and detailed engineering through construction, commissioning, and performance testing.</li></ul><p>Strong experience in contract administration, claims management, and commercial negotiation on FIDIC or equivalent EPC contract forms, including managing client and consortium relationships on complex, high-value power projects.</p><p><br></p><p><strong>Knowledge and Skills:</strong></p><p><br></p><p><strong>Power Sector EPC Expertise</strong></p><p>Deep understanding of power generation technologies, grid interconnection requirements, and EPC delivery models specific to thermal, renewable, and transmission projects.</p><p><br></p><p><strong>Project Controls &amp; Commercial Acumen</strong></p><p>Strong ability to manage project cost, schedule, and contract performance using earned value management and other project controls methodologies.</p><p><br></p><p><strong>Engineering &amp; Construction Coordination</strong></p><p>Working knowledge of multi-disciplinary engineering coordination and construction sequencing for complex power infrastructure projects.</p><p><br></p><p><strong>Risk &amp; Stakeholder Management</strong></p><p>Skilled in identifying and mitigating project risks while managing relationships with clients, consortium partners, and regulatory authorities.</p><p><br></p><p><strong>HSE &amp; Quality Leadership</strong></p><p>Proven ability to embed process safety, HSE, and quality assurance standards across large, multi-contractor project sites.</p><p><br></p>

<p>Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure 'right-first time' job performance so that equipment reliability is maximized, while improving maintenance 'tool time', 'work quality' by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services. The role is expected to be able to remove uncertainty to execute planning in a systematically, efficient and economical way with forecasted maintenance job planning approach. He or she should be able to independently develop cost, and time estimates of planned maintenance work to meet budgets and schedules. Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updating, deletion etc. Routine maintenance job planning Establish, maintain and improve the Maintenance Plans within the area of responsibility Develop equipment preventive maintenance schedule. Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services. Preparing work pack for each work order. Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods, procedures and oversee spare parts inventory. Contract Handling Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required. Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning. Verify and process the invoices submitted by the contractor. Spares and Materials management Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for scheduled activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained. Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required. Responsible for the Periodic Inventory review &amp; Changes in the buffer stock levels with the coordination of end-users. Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure availability. Work Progress Reporting Provide superiors with work status reports to enable effective monitoring of overall progress against agreed plans. Provide the Maintenance key performance indicators data to superiors on weekly and monthly basis. Annual look ahead plan and cost optimization Estimate the annual planning of major maintenance jobs pertaining to individual areas of responsibility and provide inputs to budgeting process. Forecast the requirement of labor resources, materials and services and initiate necessary procurement actions to ensure that all resources are made available on time in order to achieve optimized maintenance cost. Record keeping in CMMS (computerized maintenance management system). Good HSEQ (health safety environment &amp; quality) record in his past working. Read, understand, and support execute the jobs as per standard operating procedure/ work instruction. Comply with COMPANY Life Saving Rules as per "PSa-001 Life Saving Rule" Document. Comply with all relevant procedures of COMPANY Integrated Management System comprising of Occupational Health and Safety, Quality, Environment, Responsible Care, IFA Product Stewardship &amp; energy Management System.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Engineering degree (12+4 years). * (Mechanical -1no. Electrical -1no., Instrument -1 no.)* 05 years relevant experience in Oil &amp; Gas/Petrochemical/Fertilizer industry and competency* * Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP - SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc. in SAP.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure 'right-first time' job performance so that equipment reliability is maximized, while improving maintenance 'tool time', 'work quality' by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services.</li> <li>The role is expected to be able to remove uncertainty to execute planning in a systematically, efficient and economical way with forecasted maintenance job planning approach.</li> <li>He or she should be able to independently develop cost, and time estimates of planned maintenance work to meet budgets and schedules.</li> <li>Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updating, deletion etc.</li> </ul> <p>Routine maintenance job planning</p><br> <ul> <li>Establish, maintain and improve the Maintenance Plans within the area of responsibility</li> <li>Develop equipment preventive maintenance schedule.</li> <li>Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services.</li> <li>Preparing work pack for each work order.</li> <li>Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods, procedures and oversee spare parts inventory.</li> </ul> <p>Contract Handling</p><br> <ul> <li>Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required.</li> <li>Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning.</li> <li>Verify and process the invoices submitted by the contractor.</li> </ul> <p>Spares and Materials management</p><br> <ul> <li>Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for scheduled activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained.</li> <li>Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required.</li> <li>Responsible for the Periodic Inventory review &amp; Changes in the buffer stock levels with the coordination of end-users.</li> <li>Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure availability.</li> </ul> <p>Work Progress Reporting</p><br> <ul> <li>Provide superiors with work status reports to enable effective monitoring of overall progress against agreed plans.</li> <li>Provide the Maintenance key performance indicators data to superiors on weekly and monthly basis.</li> </ul> <p>Annual look ahead plan and cost optimization</p><br> <ul> <li>Estimate the annual planning of major maintenance jobs pertaining to individual areas of responsibility and provide inputs to budgeting process.</li> <li>Forecast the requirement of labor resources, materials and services and initiate necessary procurement actions to ensure that all resources are made available on time in order to achieve optimized maintenance cost.</li> <li>Record keeping in CMMS (computerized maintenance management system).</li> <li>Good HSEQ (health safety environment &amp; quality) record in his past working.</li> <li>Read, understand, and support execute the jobs as per standard operating procedure/ work instruction.</li> <li>Comply with COMPANY Life Saving Rules as per "PSa-001 Life Saving Rule" Document.</li> <li>Comply with all relevant procedures of COMPANY Integrated Management System comprising of Occupational Health and Safety, Quality, Environment, Responsible Care, IFA Product Stewardship &amp; energy Management System.</li> </ul><br><p>* Qualification, experience, and competency in respective disciple:* Bachelor's Engineering degree (12+4 years).<br>* (Mechanical -1no. Electrical -1no., Instrument -1 no.)* 05 years relevant experience in Oil &amp; Gas/Petrochemical/Fertilizer industry and competency*<br>* Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP - SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc. in SAP.</p><br><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR (All inclusive)</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure 'right-first time' job performance so that equipment reliability is maximized, while improving maintenance 'tool time', 'work quality' by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services.</li> <li>The role is expected to be able to remove uncertainty to execute planning in a systematically, efficient and economical way with forecasted maintenance job planning approach.</li> <li>He or she should be able to independently develop cost, and time estimates of planned maintenance work to meet budgets and schedules.</li> <li>Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updating, deletion etc.</li> </ul> <p>Routine maintenance job planning</p><br> <ul> <li>Establish, maintain and improve the Maintenance Plans within the area of responsibility</li> <li>Develop equipment preventive maintenance schedule.</li> <li>Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services.</li> <li>Preparing work pack for each work order.</li> <li>Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods, procedures and oversee spare parts inventory.</li> </ul> <p>Contract Handling</p><br> <ul> <li>Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required.</li> <li>Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning.</li> <li>Verify and process the invoices submitted by the contractor.</li> </ul> <p>Spares and Materials management</p><br> <ul> <li>Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for scheduled activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained.</li> <li>Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required.</li> <li>Responsible for the Periodic Inventory review &amp; Changes in the buffer stock levels with the coordination of end-users.</li> <li>Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure availability.</li> </ul> <p>Work Progress Reporting</p><br> <ul> <li>Provide superiors with work status reports to enable effective monitoring of overall progress against agreed plans.</li> <li>Provide the Maintenance key performance indicators data to superiors on weekly and monthly basis.</li> </ul> <p>Annual look ahead plan and cost optimization</p><br> <ul> <li>Estimate the annual planning of major maintenance jobs pertaining to individual areas of responsibility and provide inputs to budgeting process.</li> <li>Forecast the requirement of labor resources, materials and services and initiate necessary procurement actions to ensure that all resources are made available on time in order to achieve optimized maintenance cost.</li> <li>Record keeping in CMMS (computerized maintenance management system).</li> <li>Good HSEQ (health safety environment &amp; quality) record in his past working.</li> <li>Read, understand, and support execute the jobs as per standard operating procedure/ work instruction.</li> <li>Comply with COMPANY Life Saving Rules as per "PSa-001 Life Saving Rule" Document.</li> <li>Comply with all relevant procedures of COMPANY Integrated Management System comprising of Occupational Health and Safety, Quality, Environment, Responsible Care, IFA Product Stewardship &amp; energy Management System.</li> </ul><br><ul> <li>Qualification, experience, and competency in respective disciple:</li> <li>Bachelor's Engineering degree (12+4 years).</li> <li>(Mechanical -1no. Electrical -1no., Instrument -1 no.)</li> <li>05 years relevant experience in Oil &amp; Gas/Petrochemical/Fertilizer industry and competency*</li> <li>Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP - SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc. in SAP.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR (All inclusive)</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>We are seeking a Site Inspector (Electrical) who will provide electrical engineering support for Design &amp; Build interior fit-out projects by reviewing designs, supervising electrical and ELV installations, coordinating multidisciplinary interfaces and ensuring that all systems are installed, tested and commissioned in accordance with project specifications, statutory regulations and client requirements.</span></span></p><br><p><b><span><span>Key Responsibilities:</span></span></b></p><br><ul><li><span><span>Review electrical drawings, single-line diagrams, load calculations, lighting calculations, shop drawings, material submittals and method statements.</span></span></li><li><span><span>Inspect and supervise the installation of:</span></span><ul><li><span><span>Power distribution systems</span></span></li><li><span><span>Lighting and emergency lighting</span></span></li><li><span><span>Small power systems</span></span></li><li><span><span>Distribution boards</span></span></li><li><span><span>Cable containment and wiring systems</span></span></li><li><span><span>Earthing and bonding</span></span></li><li><span><span>Lightning protection</span></span></li><li><span><span>Associated electrical equipment</span></span></li></ul></li><li><span><span>Inspect and monitor ELV systems, including:</span></span><ul><li><span><span>Structured cabling</span></span></li><li><span><span>Data and voice networks</span></span></li><li><span><span>CCTV</span></span></li><li><span><span>Access control</span></span></li><li><span><span>Public address and intercom systems</span></span></li><li><span><span>IPTV</span></span></li><li><span><span>Audio-visual systems</span></span></li><li><span><span>BMS interfaces</span></span></li><li><span><span>Other low-current systems</span></span></li></ul></li><li><span><span>Coordinate electrical works with architectural, mechanical, fire protection and ICT disciplines.</span></span></li><li><span><span>Review equipment selections against approved schedules, energy-efficiency requirements and manufacturer recommendations.</span></span></li><li><span><span>Monitor construction progress and review inspection requests.</span></span></li><li><span><span>Identify technical issues and issue observations or NCRs.</span></span></li><li><span><span>Verify implementation of corrective actions.</span></span></li><li><span><span>Witness insulation-resistance tests, continuity tests, functional tests, emergency-lighting tests, ELV integration tests and power-on testing.</span></span></li><li><span><span>Review commissioning procedures, test reports, O&amp;M manuals and as-built documents.</span></span></li><li><span><span>Participate in factory inspections, material inspections, mock-ups, SATs, integrated system testing and handover.</span></span></li><li><span><span>Assist with contractor payment applications, variation proposals and electrical claims.</span></span></li><li><span><span>Maintain RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.</span></span></li><li><span><span>Ensure compliance with QCS, Kahramaa regulations, Qatar Civil Defense requirements, IEC, NFPA and other applicable standards.</span></span><br></li></ul><br><span>Requirements</span><p><b><span><span>Requirements:</span></span></b></p><br><ul><li><span><span>Bachelor’s Degree in Electrical Engineering.</span></span></li><li><span><span>Professional registration is preferred.</span></span></li><li><span><span>Testing and Commissioning or Low-Voltage Systems certification is an advantage.</span></span></li><li><span><span>Minimum 10 years of electrical engineering, construction supervision or project-management experience.</span></span></li><li><span><span>Minimum 5 years of experience in high-end commercial office fit-out projects.</span></span></li><li><span><span>Proven Design &amp; Build project experience.</span></span></li><li><span><span>Strong experience in power distribution, lighting, emergency power, ELV and ICT coordination.</span></span></li><li><span><span>Experience in testing and commissioning electrical and low-current systems.</span></span></li><li><span><span>Qatar experience and familiarity with QCS, Kahramaa, Qatar Civil Defense and local approval procedures.</span></span></li><li><span><span>Proficiency in AutoCAD and Microsoft Office.</span></span></li><li><span><span>Revit or BIM experience is preferred.</span></span><br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><span>We are seeking a Site Inspector (Electrical) who will provide electrical engineering support for Design &amp; Build interior fit-out projects by reviewing designs, supervising electrical and ELV installations, coordinating multidisciplinary interfaces and ensuring that all systems are installed, tested and commissioned in accordance with project specifications, statutory regulations and client requirements.</span></span></p><br><p><b><span><span>Key Responsibilities:</span></span></b></p><br><ul><li><span><span>Review electrical drawings, single-line diagrams, load calculations, lighting calculations, shop drawings, material submittals and method statements.</span></span></li><li><span><span>Inspect and supervise the installation of:</span></span><ul><li><span><span>Power distribution systems</span></span></li><li><span><span>Lighting and emergency lighting</span></span></li><li><span><span>Small power systems</span></span></li><li><span><span>Distribution boards</span></span></li><li><span><span>Cable containment and wiring systems</span></span></li><li><span><span>Earthing and bonding</span></span></li><li><span><span>Lightning protection</span></span></li><li><span><span>Associated electrical equipment</span></span></li></ul></li><li><span><span>Inspect and monitor ELV systems, including:</span></span><ul><li><span><span>Structured cabling</span></span></li><li><span><span>Data and voice networks</span></span></li><li><span><span>CCTV</span></span></li><li><span><span>Access control</span></span></li><li><span><span>Public address and intercom systems</span></span></li><li><span><span>IPTV</span></span></li><li><span><span>Audio-visual systems</span></span></li><li><span><span>BMS interfaces</span></span></li><li><span><span>Other low-current systems</span></span></li></ul></li><li><span><span>Coordinate electrical works with architectural, mechanical, fire protection and ICT disciplines.</span></span></li><li><span><span>Review equipment selections against approved schedules, energy-efficiency requirements and manufacturer recommendations.</span></span></li><li><span><span>Monitor construction progress and review inspection requests.</span></span></li><li><span><span>Identify technical issues and issue observations or NCRs.</span></span></li><li><span><span>Verify implementation of corrective actions.</span></span></li><li><span><span>Witness insulation-resistance tests, continuity tests, functional tests, emergency-lighting tests, ELV integration tests and power-on testing.</span></span></li><li><span><span>Review commissioning procedures, test reports, O&amp;M manuals and as-built documents.</span></span></li><li><span><span>Participate in factory inspections, material inspections, mock-ups, SATs, integrated system testing and handover.</span></span></li><li><span><span>Assist with contractor payment applications, variation proposals and electrical claims.</span></span></li><li><span><span>Maintain RFIs, technical submittals, inspection records, commissioning reports and as-built documentation.</span></span></li><li><span><span>Ensure compliance with QCS, Kahramaa regulations, Qatar Civil Defense requirements, IEC, NFPA and other applicable standards.</span></span><br></li></ul><br><span>Requirements</span><p><b><span><span>Requirements:</span></span></b></p><br><ul><li><span><span>Bachelor’s Degree in Electrical Engineering.</span></span></li><li><span><span>Professional registration is preferred.</span></span></li><li><span><span>Testing and Commissioning or Low-Voltage Systems certification is an advantage.</span></span></li><li><span><span>Minimum 10 years of electrical engineering, construction supervision or project-management experience.</span></span></li><li><span><span>Minimum 5 years of experience in high-end commercial office fit-out projects.</span></span></li><li><span><span>Proven Design &amp; Build project experience.</span></span></li><li><span><span>Strong experience in power distribution, lighting, emergency power, ELV and ICT coordination.</span></span></li><li><span><span>Experience in testing and commissioning electrical and low-current systems.</span></span></li><li><span><span>Qatar experience and familiarity with QCS, Kahramaa, Qatar Civil Defense and local approval procedures.</span></span></li><li><span><span>Proficiency in AutoCAD and Microsoft Office.</span></span></li><li><span><span>Revit or BIM experience is preferred.</span></span><br></li></ul><br> </div>

<p>Direct commissioning activities across all project phases to ensure safe, efficient and compliant delivery of engineering, pre-commissioning, commissioning, startup and operational handover. Review and evaluate contractor commissioning strategies, procedures, technical reports, execution methodologies and commissioning deliverables to ensure compliance with project specifications, contractual obligations and LNG requirements. Determine and implement commissioning priorities, execution strategies and resource requirements to support achievement of project milestones and operational readiness objectives. Coordinate commissioning interfaces between Engineering, Construction, Systems Completions, Operations, contractors, vendors and specialist service providers to ensure effective project execution. Assess and validate contractor commissioning capability, organizational structure, manpower loading and specialist vendor resources, providing recommendations to optimize commissioning performance and project delivery. Ensure delivery of critical commissioning milestones including Systemization, Ready on Site (ROS), Mechanical Completion (MC), Ready for Commissioning (RFC), Ready for Startup (RFSU), startup, performance testing and operational handover. Review and validate Factory Acceptance Tests (FATs), Site Acceptance Tests (SATs), package testing, integrated systems testing and critical commissioning activities to confirm compliance with approved procedures, technical specifications and project requirements. Evaluate commissioning progress, systems completion status, preservation activities, startup readiness and commission performance reporting to identify risks, determine corrective actions and ensure operational readiness. Represent the Commissioning function during project reviews, technical meetings, management reviews, audits and stakeholder engagements, ensuring commissioning objectives, risks and priorities are effectively communicated. Uphold commissioning governance, company standards and industry best practices, ensuring the safe, efficient and compliant transition of facilities from project execution to Operations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors Degree in Applied Sciences or Engineering.</li><li>10 years' experience in various project phases such as engineering, procurement, and construction, within large-scale commissioning projects in the oil and gas industry, including 2 years of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel.</li><li>In depth knowledge of discipline design standards, specifications, codes, appropriate safety criteria, offshore facilities and discipline design, construction, operations and engineering administration.</li><li>Knowledge and experience in discipline commissioning delivery processes and associated project phases, familiar with completions walkdowns and Pre-Startup Safety Reviews.</li><li>Experience in a senior commissioning role for large contracts, with strong commissioning / technical skills, greenfield, brownfield projects and simultaneous operations (SIMOPS).</li><li>Experience in project completions and project systemization, including check sheet development, check sheet allocation, writing of pre-commissioning / commissioning documents such as commissioning procedures and method statements.</li><li>Experience with Oil &amp; Gas companies, Contractors, or Service Companies.</li><li>Knowledge in projects execution, engineering, operations, pre-commissioning, commissioning and systems completion.</li></ul>

Senior Sales Manager (Elegancia Steel)<br>Key Responsibilities:Develop and execute sales strategies to achieve revenue growth and profitability targets. Identify new business opportunities and expand the customer base across key market sectors. Lead, mentor, and develop the sales team to achieve individual and company objectives. Build and maintain strong relationships with clients, consultants, contractors, and key stakeholders. Develop a robust CRM process and ensure effective customer relationship management. Monitor market trends, competitor activities, and emerging opportunities. Prepare sales forecasts, manage pipelines, and drive business development initiatives. Ensure high levels of customer satisfaction and adherence to company policies and business processes. Expand business opportunities beyond Qatar and strengthen the company's regional footprint.<br>Requirements:Bachelor's Degree in Civil Engineering or Mechanical Engineering (Master's degree is an advantage).10-15 years of experience with leading structural steel fabrication companies. Minimum 5 years in a senior sales management role within the GCC market. Proven track record in structural steel fabrication, Oil & Gas EPC projects, commercial, and industrial sectors. Strong experience in the Pre-Engineered Buildings (PEB) industry. Excellent leadership, business development, negotiation, and relationship management skills. Strong understanding of market trends, sales strategies, and revenue growth planning. ERP knowledge, preferably SAP. Arabic speaker with excellent command of English.<br>Skills & Competencies:Sales Planning & Strategy Business Development Relationship Management Leadership & Team Development Market Analysis CRM Management Strategic Planning & Execution Communication & Negotiation Resilience & Agility AI Fluency

<p>The BMS (Building Management System) / LMV (Local Monitoring and Visualization) / DCP (Distributed Control Panel) Operator is responsible for monitoring, operating, and controlling HVAC and utility systems through Building Management Systems and related control platforms. The role ensures the efficient and safe operation of chilled water plants, HVAC equipment, and associated safety and shutdown systems while maintaining optimal building performance. The operator is expected to provide timely system monitoring, fault identification, operational support, and accurate reporting in compliance with client procedures, safety standards, and operational requirements.</p><p><br></p><p><b>Your role</b></p><p>Monitor and operate Building Management Systems (BMS), LMV, and DCP control systems on a daily basis.</p><p>Supervise the operation of chilled water production plants, HVAC systems, and associated utility equipment.</p><p>Monitor system parameters, alarms, trends, and performance indicators to ensure efficient operation.</p><p>Identify operational abnormalities, system faults, and equipment malfunctions, and escalate issues to maintenance teams when required.</p><p>Operate and monitor safety, shutdown, and emergency control systems in accordance with approved procedures.</p><p>Maintain accurate operational logs, reports, and system records.</p><p>Analyze system data and provide recommendations for performance improvement and energy optimization.</p><p>Coordinate with HVAC, mechanical, electrical, and instrumentation technicians during maintenance activities.</p><p>Ensure compliance with client policies, safety procedures, and operating standards.</p><p>Respond promptly to emergency situations and initiate corrective actions as per established procedures.</p><p>Perform routine inspections of plant equipment and verify equipment status through control systems.</p><p>Support preventive maintenance programs by providing operational feedback and system history.</p><p>Utilize computer applications, emails, and reporting tools for communication and documentation purposes.</p><p><b><br></b></p><p><b>About you</b></p><p>Completion of Secondary Education (12 years of schooling).</p><p>Three-year full-time Diploma in Mechanical, Process, or Instrumentation Engineering.</p><p>Age between 25 and 30 years preferred.</p><p>Minimum 5 years of experience in mechanical or instrumentation plant operations.</p><p>Experience in oil &amp; gas facilities, refineries, district cooling plants, or similar industrial environments is preferred.</p><p>Knowledge of chilled water production systems and associated HVAC equipment.</p><p>Familiarity with safety interlocks, shutdown systems, and plant operational procedures.</p><p>Working knowledge of Programmable Logic Controllers (PLC) and automated control systems is desirable.</p><p>Proficiency in operating Building Management Systems (BMS), SCADA, or similar monitoring platforms.</p><p>Good understanding of HVAC plant operations, monitoring, and troubleshooting.</p><p>Strong computer skills with proficiency in Microsoft Office applications and email communication.</p><p>Good spoken and written English communication skills.</p><p>Ability to interpret operational data, trends, and system alarms.</p><p>Strong problem-solving skills and attention to detail.</p><p>Ability to work in shifts and respond effectively during emergencies.</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44673&nbsp;&nbsp; <br> <br> Area activity <p>Mechanical, HVAC and Electrical Services</p><br><br>Position description Job title <p>Operator - Utilities M/F</p><br><br> Contract type <p>Temporary work contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>06 Months</p><br><br> Job description <br><p>We currently have an opportunity within SPIE&nbsp;Global&nbsp;Services Energy Doha&nbsp;for a:</p><br><br><br><p><strong>Operator Utilities&nbsp;&nbsp;</strong></p><br><br><p>Job Purpose:</p><br><br><p>This position is a unique opportunity with so many advantage in oil and gas career sector in one of the most important Project handled by SPIE in Qatar with&nbsp; QatarEnergy in which the Project is in its 10th year.</p><br><br><p>The Contract consists with a multi discipline tasks in Maintenance and Operation of large Industrial Area with duration of 05 years</p><br><br><br><p>The candidate starts with general skills like :</p><br><br><br><p>Written communication,&nbsp;Active listening,&nbsp;Verbal communication, editing.</p><br><br><p>Organization,&nbsp;Time management,&nbsp;Attention to detail,&nbsp;Problem-solving,&nbsp;</p><br><br><p>Computer literacy&nbsp;essential and familiarity with MS Office 2000 packages.</p><br><br><p>The candidate concludes with important abilities including Safe work culture and practices</p><br><br><p>Your main duties will be to:-</p><br><br><p>He shall be responsible for operation jobs, ensuring plant operation, isolation / de-isolation, waste water plant operation, chemical preparation, etc., system surveillance of potable water, sewage, industrial water and landscaping network, carry out cleaning activities, coordinate and handle non routine and emergency works, ensure the operational requirements are met with, compliance with safety and environmental standards, ensuring good house keeping , maintain good safety standards in the maintenance section, conversant with permit to work.</p><br><br><p>The candidate selected for this position shall have ability to understand &amp; communicate in English.</p><br><br><p>Candidates having Gulf experience will be preferred. Candidates shall have good health and sound physique.</p><br><br> <br> Profile <br><p>Ideally you will have diploma in engineering from a recognized<br>institution with 07 year experience or a Trade certificate with 07 year experience in oil and gas&nbsp;or petrochemical industry or in a similar system I facility.</p><br><br><br><p>Experience required in water and chemical analysis.</p><br><br><p>Staff selected for this position shall have good spoken in English.</p><br><br><p>Gulf experience shall be added advantage</p><br><br><p>All have experience in operating various types of pumps, diesel engines, generators, compressors, blowers, stationary equipment such as piping, valves, and waste water treatment plant. Preference will be given to candidates with experience in DCS. He shall be familiar with plant isolation procedures, lock-out and tagging procedures and plant permit to work procedures.<br></p><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br> <br>Position location Location <br> Ras Laffan <br>Candidate criteria Minimum level of experience required <p>6 years or more</p><br><br> Required authorisations <br><p>Diploma in engineering or Trade Certificate (Chemical / Environment / Mechanical or equivalent)</p><br><br><p>07 years' experience.</p><br><br><p>Nature of experience:</p><br><br><p>STP / WWTP plant / Utility plant and systems operation hands-on experience</p><br><br><p>Experience in Operation of Utilities or similar system in Oil and Gas or petrochemical industry or major utilities set-up</p><br><br> <br> Languages <p>English (D-Full professional proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities.</p><br><br> <br> <br><br> </div>