Mechanical Engineering Jobs in Qatar

<p>Provide technical guidance to support the Transportation Network and Airfield Pavement Activity Management Plan (TNAP) AMP as required by the contract. This position will be in support of the Air Force Contract Augmentation Program (AFCAP), and it is located at Al Udeid Air Base (AUAB), Doha, Qatar. Essential Responsibilities: Provides management service of airfield pavements and transportation infrastructure networks to enable the safe and efficient movement of people, equipment, aircraft, and material across the installation and airfield. Advise and assist in a portfolio-wide view of facilities and linear infrastructure at the highest level. Provide technical guidance to support the Heavy Pavements Sub-AMP, Pavements/Airfield Pavements Sub-AMP duties and responsibilities. Responsible for an asset lifecycle management portfolio containing all Air Force-owned roads, bridges, parking lots, curbs and gutters, traffic signals, signage, marking, sidewalks, walkways, rail systems, docks, final denial barriers (FDB), FDB control systems, FDB supporting safety systems and traffic management and planning. This AMP Manager s subject matter expertise shall lend itself to providing the Government with recommendations on how best to invest in the assets under their purview and align its efforts under four main lines of effort: Asset Visibility, Requirements, Planning, and Performance. Advise and assist the Government to ensure the asset inventory reflects sufficient level of detail to enable investment decisions. Advise and assist with the development of the Future Years Defense Program +3 (FYDP+3) for infrastructure pavements. Conduct regular quality assurance (QA) reviews of data and use gap analysis to identify where Sub-AMP and subject matter experts shall collect additional data. Implement data standards for assets within respective portfolios and provide guidance to Sub-AMPs and the Built Infrastructure Assessment Team (BIAT) on which inventory to prioritize and advise on how often and when to conduct condition assessments. Support condition assessments and provide guidance to ensure relevant data has visibility and analysis. Work with Operations Flight shops, subject matter experts, and the Engineering Flight to advise and assist the Government on the condition assessment methodology and approach to ensure the data is adequate and the data resulting from the condition assessments are properly documented. Advise and assist the Government in defining and prioritizing requirements within respective activities. Integrate requirements from Sub-AMPs within their activity and identify target years for project development, design, and execution. Advise and assist on creating requirements to support future opportunities deriving from asset analysis. Utilize appropriate systems to identify investment requirements at facility or equivalent master-asset level to repair/sustain systems throughout their life cycle. Advise and assist on developing requirements which may be executed through organic Operations Flight labor or through projects managed in the Engineering Flight. Perform work planning, including grouping of requirements into opportunities and developing a rough cost and work estimate for them. Lead semi-annual AMP working groups. AMP working groups should discuss the status of asset visibility, the current risk in asset portfolios, project candidates, performance assessments of key performance indicators (KPI), a review of any completed AMP objectives, and a summary of AMP objectives to accomplish in the coming year. When construction impacting the TNAP AMP is completed the TNAP AMP Manager will update the Pavements Condition Index in PAVER with no more than one (1) error per update. Advise and assist the Government in the development of metrics and KPIs to ensure activities deliver optimal service.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Position Knowledge, Skills and Abilities Required:</b> Civil Engineer Bachelor s Degree from an ABET Accredited University with at least five (5) years experience in pavement, construction, and maintenance and transportation infrastructure management. Experience with pavement management systems is preferred. Must have an equivalent of an Air Force minimum 5 level or equal and 5 years experience in pavement maintenance and repair, asphalt paving, concrete paving, and pavement marking. Prior R&amp;R experience preferred. Must be familiar with PAVER, serve as the engineering expert and liaison for the Traffic Safety Council, and work with the sub-AMP managers assigned to areas of TNAP responsibilities. Required to complete AFIT WENG 200, WENG 400, WENG 555, WMGT 241, WMGT 331, WMGT 341, WMGT 417 required and WENG 550 desired. All required courses are offered online or live broadcast and shall be completed through the first available offering after hiring date. Must be familiar with NexGen IT and BUILDER SMS. Ability to exercise discretion and make effective decisions. Solid communications and strong interpersonal skills a must. Strong ability to work and lead as a member of a diverse, dynamic team. Outstanding problem-solving skills and sound judgment. Computer literate; can use Microsoft Office and Project, etc. Must be a USN to fill this position. Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance. Possess a valid state issued driver s license or international driver s license and passport. Prior overseas government contracting experience preferred.</p><p>Work Environment, Physical Demands, and Mental Demands: Able to lift, carry, and push supplies and boxes up to 50 pounds. Personnel should be aware of moving on short notice and under adverse conditions.</p><p>Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p>

<p><h4>Position summary</h4> <p><strong>Your legacy starts with us</strong><br> At The Ritz-Carlton, Doha, we invite you to experience refined luxury where timeless elegance meets true Qatari hospitality. Situated along the pristine shores of the Arabian Gulf for almost 24 years, our 5-star resort features 374 elegantly designed rooms and suites, award-winning restaurants, world-class spa facilities with a state-of-the-art fitness center, and impeccable service that defines our legendary brand.</p> <p>From serene indoor and outdoor pools to a private beach and a club lounge for elevated and personalized experiences, every detail perfectly reflects our commitment to excellence. The property is also ideal for events with a wide selection of meeting rooms, stunning wedding venues, and a dedicated team that thoughtfully plans and tailors to each unique vision.</p> <p>Whether you’re savoring an afternoon tea in our lobby lounge, watching the city skyline sparkle by night in one of our restaurants, or celebrating an important event, The Ritz-Carlton, Doha, presents a truly remarkable setting for life’s most meaningful moments.</p> <h4>Find purpose in your passion</h4> <p>At The Ritz-Carlton, we firmly believe that our Ladies and Gentlemen are the heart of everything we do and the most important resource in our service commitment to our guests. With passion, genuine care, dedication, and pride, we can achieve common goals and grow together while crafting moments that will be remembered forever.</p> <p>Which is why at The Ritz-Carlton, Doha, we are currently seeking passionate individuals to join our esteemed team and bring their own unique expertise to our world-famous service philosophy. As an elite hotel in the region with a deep generational legacy, we offer you in return:</p> <ul> <li>A rewarding career within one of the most recognized and prestigious luxury brands in the world.</li> <li>Personal and professional development plans with curated training materials and guidance from highly skilled and experienced colleagues in the industry.</li> <li>Various opportunities for internal growth both locally and internationally within the portfolio of Marriott International properties.</li> <li>Consistent and reliable support to ensure you always have the tools and knowledge to harness your full potential and reach your goals.</li> <li>A competitive package, inclusive of accommodation, flight tickets, transportation, meals, and more.</li> <li>Exclusive training and leadership development programs.</li> <li>Recognition and rewards for exceptional service.</li> <li>Preferential members rates at Marriott hotels globally.</li> <li>Dining and wellness discounts for your family and you.</li> <li>Medical insurance coverage.</li> <li>An HR team dedicated to your success and wellbeing.</li> </ul> <h4>Our expectations from the role</h4> <ul> <li>Fix minor plumbing problems such as unclogging drains.</li> <li>Assemble pipe sections, tubing, and fittings.</li> <li>Fill pipes or plumbing fixtures with water or air to detect and locate leaks.</li> <li>Review blueprints, building codes, and specifications.</li> <li>Study building plan and inspect structure in order to plan installations.</li> <li>Measure, cut, thread, and bend pipe to required angle.</li> <li>Install and maintain pipe assemblies, fittings, valves, appliances, and fixtures.</li> <li>Perform miscellaneous minor repairs.</li> <li>Perform preventative maintenance on tools and equipment.</li> <li>Follow all company and safety and security policies and procedures; report safety hazards, accidents, or injuries; complete safety training and certifications.</li> <li>Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</li> <li>Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs.</li> <li>Develop and maintain positive working relationships with others.</li> <li>Speak with others using clear and professional language.</li> <li>Ensure adherence to quality expectations and standards.</li> <li>Move, lift, carry, push, pull, and place objects weighing less than or equal to 75 pounds without assistance.</li> <li>Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds.</li> <li>Grasp, turn, and manipulate objects of varying size and weight.</li> <li>Reach overhead and below the knees, including bending, twisting, pulling, and stooping.</li> <li>Move up and down a ladder.</li> <li>Stand, sit, or walk for an extended period of time.</li> <li>Perform other reasonable job duties as requested by supervisors.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 2 years related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> </ul> <h4>Required qualifications</h4> <ul> <li>License or certification: Stationary engineer/boiler operator license.</li> <li>Plumber certification.</li> </ul> <p>In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At more than 100 award-winning properties worldwide, The Ritz-Carlton Ladies and Gentlemen create experiences so exceptional that long after a guest stays with us, the experience stays with them. Attracting the world’s top hospitality professionals who curate lifelong memories, we believe that everyone succeeds when they are empowered to be creative, thoughtful, and compassionate.</p> <p>Every day, we set the standard for rare and special luxury service the world over and pride ourselves on delivering excellence in the care and comfort of our guests.</p> <p>Your role will be to ensure that the “Gold Standards” of The Ritz-Carlton are delivered graciously and thoughtfully every day. The Gold Standards are the foundation of The Ritz-Carlton and are what guides us each day to be better than the next. It is this foundation and our belief that our culture drives success by which The Ritz-Carlton has earned the reputation as a global brand leader in luxury hospitality.</p> <p>As part of our team, you will learn and exemplify the Gold Standards, such as our Employee Promise, Credo, and our Service Values. And our promise to you is that we offer the chance to be proud of the work you do and who you work with.</p> <p>In joining The Ritz-Carlton, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<ul><li><p>Conduct comprehensive inspections of Toyota, Lexus, and multi-brand vehicles to assess their overall condition.</p></li><li><p>Collect vehicle keys and coordinate vehicle movement across inspection sites.</p></li><li><p>Perform visual and functional inspections of mechanical, electrical, body, chassis, suspension, steering, braking, and safety systems.</p></li><li><p>Use computerized diagnostic tools to identify faults and verify vehicle performance.</p></li><li><p>Conduct road tests to assess engine, transmission, suspension, braking, steering, and overall drivability.</p></li><li><p>Identify mechanical defects, accident damage, repainting, corrosion, and structural repairs.</p></li><li><p>Capture clear photographic evidence of vehicle condition, defects, damages, and missing parts.</p></li><li><p>Verify vehicle accident history using systems such as Metrash and other available platforms.</p></li><li><p>Prepare accurate inspection reports with repair recommendations and estimated vehicle condition.</p></li><li><p>Ensure inspection documentation is completed accurately and submitted within agreed timelines.</p></li><li><p>Maintain compliance with company policies, manufacturer standards, and safety procedures.</p></li><li><p>Support continuous improvement initiatives and maintain high inspection quality standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of automotive mechanical, electrical, and body systems.</p></li><li><p>Ability to diagnose vehicle faults and assess repair requirements.</p></li><li><p>Proficiency in using computerized diagnostic equipment.</p></li><li><p>Knowledge of vehicle inspection standards and safety regulations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent attention to detail and report-writing skills.</p></li><li><p>Good communication and teamwork abilities.</p></li><li><p>Ability to work under pressure and manage multiple inspections efficiently.</p></li></ul>

<ul><li><p>Conduct comprehensive inspections of Toyota, Lexus, and multi-brand vehicles to assess their overall condition.</p></li><li><p>Collect vehicle keys and coordinate vehicle movement across inspection sites.</p></li><li><p>Perform visual and functional inspections of mechanical, electrical, body, chassis, suspension, steering, braking, and safety systems.</p></li><li><p>Use computerized diagnostic tools to identify faults and verify vehicle performance.</p></li><li><p>Conduct road tests to assess engine, transmission, suspension, braking, steering, and overall drivability.</p></li><li><p>Identify mechanical defects, accident damage, repainting, corrosion, and structural repairs.</p></li><li><p>Capture clear photographic evidence of vehicle condition, defects, damages, and missing parts.</p></li><li><p>Verify vehicle accident history using systems such as Metrash and other available platforms.</p></li><li><p>Prepare accurate inspection reports with repair recommendations and estimated vehicle condition.</p></li><li><p>Ensure inspection documentation is completed accurately and submitted within agreed timelines.</p></li><li><p>Maintain compliance with company policies, manufacturer standards, and safety procedures.</p></li><li><p>Support continuous improvement initiatives and maintain high inspection quality standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong knowledge of automotive mechanical, electrical, and body systems.</p></li><li><p>Ability to diagnose vehicle faults and assess repair requirements.</p></li><li><p>Proficiency in using computerized diagnostic equipment.</p></li><li><p>Knowledge of vehicle inspection standards and safety regulations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent attention to detail and report-writing skills.</p></li><li><p>Good communication and teamwork abilities.</p></li><li><p>Ability to work under pressure and manage multiple inspections efficiently.</p></li></ul>

<ul><li><p>Ensure COMPANY QA/QC compliance and quality expectations.</p></li><li><p>Coordinate stakeholders, EPC contractors, suppliers, and third parties.</p></li><li><p>Review quality plans, procedures, ITPs, and contractor deliverables.</p></li><li><p>Lead inspections, audits, verifications, and QA/QC meetings.</p></li><li><p>Manage project quality metrics, NCRs, corrective actions, and lessons learned.</p></li><li><p>Coordinate site, workshop, and source inspection activities.</p></li><li><p>Support procurement quality reviews and criticality assessments.</p></li><li><p>Ensure mechanical acceptance, punch-list closure, and project completion.</p></li><li><p>Monitor QA/QC team performance and training needs.</p></li><li><p>Ensure compliance with COMPANY HSE requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering or equivalent.</p></li><li><p>CSWIP 3.1 Welding Inspector and NDT Level II certifications (RT, UT, MT, PT).</p></li><li><p>ISO 9001:2015 Lead/Internal Auditor certification.</p></li><li><p>Valid OPITO TBOSIET, H2S, Breathing Apparatus, and offshore medical certifications.</p></li><li><p>10+ years’ oil & gas QA/QC experience, including offshore LNG projects.</p></li><li><p>Expertise in valve inspection (MOVs, SDVs, DBBs), testing, and manufacturing.</p></li><li><p>Knowledge of API, ASME, AWS, NACE, ISO, and relevant industry standards.</p></li><li><p>Experience in inspections, audits, ITPs, NCRs, source inspection, and QA/QC programs.</p></li><li><p>Skilled in welding, NDT, coating, mechanical, E&I, and construction quality processes.</p></li><li><p>Experience leading multi-disciplinary QA/QC teams and shutdown activities.</p></li><li><p>Strong leadership, communication, analytical, and computer skills.</p></li><li><p>Experience with procurement, fabrication, installation, commissioning, and offshore modifications.</p></li></ul>

<p>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.<br>Carry out maintenance and overhaul of gas turbines, steam turbines, turbo compressors, and reciprocating compressors .<br>Diagnose equipment failures and recommend appropriate repair solutions.<br>Perform dimensional inspections using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.<br>Support reverse engineering activities for worn or damaged components.<br>Read and interpret engineering drawings, technical manuals, and repair procedures.<br>Prepare inspection reports and maintain accurate maintenance documentation.<br>Work closely with machinists and engineering teams during repair and refurbishment activities.<br>Ensure all work is completed in accordance with quality standards, safety procedures, and workshop best practices.<br>Participate in continuous improvement initiatives to enhance workshop efficiency and reliability.</p><p><strong>Desired Candidate Profile</strong></p><div> <p>Diploma or Technical Certification in Mechanical Engineering or a related discipline.</p> <p>Minimum 10 years of experience in rotating equipment maintenance and repair.</p> <p>Hands-on experience with gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong understanding of mechanical fitting, assembly, disassembly, and overhaul techniques.</p> <p>Experience using precision measuring instruments for inspection and quality control.</p> <p>Knowledge of AutoCAD, SolidWorks, Inventor, or similar CAD software is preferred.</p> <p>Good understanding of workshop safety standards and maintenance best practices.</p> <p>Proficiency in Microsoft Office for reporting and documentation.</p> <p>We are looking for an experienced Mechanical Technician with a proven background in rotating equipment maintenance, overhaul, and repair within the energy, oil &amp; gas, power generation, or heavy industrial sectors.</p> <p>Diploma or Technical Certification in Mechanical Engineering or a related technical discipline.</p> <p>Minimum 10 years of hands-on experience in rotating equipment maintenance and repair.</p> <p>Proven experience working on gas turbines, steam turbines, turbo compressors, and reciprocating compressors .</p> <p>Strong knowledge of dismantling, inspection, assembly, alignment, and overhaul of rotating equipment.</p> <p>Experience using precision measuring instruments including micrometers, verniers, dial gauges, and bore gauges.</p> <p>Ability to read and interpret engineering drawings and technical documentation.</p> <p>Familiarity with reverse engineering and workshop repair processes.</p> <p>Knowledge of CAD software is an added advantage.</p> <p>Strong focus on safety, quality, and continuous improvement.</p> <p>Good communication skills and the ability to work effectively in a multidisciplinary workshop environment.</p> </div>

Job Summary We are seeking an experienced MEP Supervisor to oversee the maintenance and operation of Mechanical, Electrical, and Plumbing (MEP) systems. The successful candidate will supervise maintenance teams, ensure preventive and corrective maintenance is carried out efficiently, and maintain compliance with safety and quality standards.<br>Key Responsibilities Supervise daily MEP maintenance activities. Plan and monitor preventive and corrective maintenance works. Lead and coordinate MEP technicians to ensure timely completion of tasks. Inspect MEP systems and troubleshoot operational issues. Ensure compliance with HSE regulations and company procedures. Maintain maintenance records and prepare basic reports. Coordinate with clients, contractors, and internal teams as required.<br>Requirements Diploma or Bachelor's Degree in Mechanical, Electrical, or a related engineering discipline. Minimum 3 years of experience in Building Maintenance or Facilities Management (preferred). Good knowledge of HVAC, electrical, plumbing, and other building services. Strong leadership, communication, and problem-solving skills. Proficiency in Microsoft Office. GCC/Qatar experience is an advantage.<br>Contract: 6 Months (Extendable) Position: MEP Supervisor Location: Qatar

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>* To supervise the EPIC Contractors during the execution of construction activities at construction site.* Participate in reviewing detailed design drawings, method statements, material requisitions, and etc.<br>* Co-ordinate mobilization of contractors on site.* Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required.<br>* Carryout daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications.* Handle all aspects of Mechanical Construction activities including site investigations, site surveys and etc.<br>* Supervise installation of Fire Electric/Diesel Pumps and Jockey pumps.* Supervise installation of deluge system piping works and underground firefighting piping works.<br>* Supervise installation of Fire water tanks.* Good knowledge in Deluge and Sprinkler System.<br>* Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions.* Sign work permits on behalf of COMPANY and to ensure that contractors compliance with conditions fixed on consolidated work permits<br>* Participate in development of as-built drawings/documentation.* Prepare Punch list for finished work prior to hand over to COMPANY by contractor by paying special attention to all equipment including Quality checks.<br>* Works closely with other COMPANY Construction Supervisors (Elect/ Arch / Instrument).* Report to COMPANY Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement.<br>* Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing COMPANY safety standards on the work site.* Liaise and report with the QC Inspector on quality related matters.<br>* Liaise with the HSE Supervisor on safety related matters.* To prepare daily report of activities and inform COMPANY/asset holders (as per approved distribution matrix) of the progress/constraints and look ahead.</p><br><br><ul> <li>Candidate must possess a Degree or Diploma in Mechanical Engineering from an internationally recognized University.</li> <li>Candidate should have a minimum of 10 to 15 years overall experience in Construction of EHV Substations up to 132kV and above with exposure to mechanical works connected with substation Electrical equipment, HVAC equipment, Fire alarm &amp; Loss prevention and Building Services.</li> <li>Must have good verbal and written communication skills to interface and communicate with internal and external departments, agencies, contractors and vendors.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>Roles &amp; Responsibilities *To Assist in the Delivery of Materials and Tooling to Mechanical Fitters *Ensure that all work is completed in a safe manner and that the health &amp; safety policies are adhered to *Work under the daily supervisor of mechanical fitters *Assist in Assembly and Bolting down of fixtures and fittings *General Labouring Duties *Lifting and Moving Materials on-site to specific project areas *Keep work areas clean and tidy</p><p><strong>Desired Candidate Profile</strong></p><p>KnowledgeAndQualifiction: Able to speak understand english.</p>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred). Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent. Minimum 3 7 years of hands-on HVAC experience (project/facilities-based). Strong knowledge of HVAC mechanical, electrical, and control systems. Experience in GCC/UAE projects preferred. Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</p><p>Skills &amp; Competencies HVAC installation, testing &amp; commissioning. Preventive &amp; breakdown maintenance. Fault diagnosis &amp; troubleshooting. Knowledge of refrigerants and handling procedures. Ability to work from drawings and method statements. Basic electrical &amp; control panel knowledge. Good communication and teamwork skills.</p>

<p>We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards.</p><p>Your role</p><ul><li>Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems Split &amp; packaged units, exhaust/fresh air systems</li><li>Perform preventive and corrective maintenance as per schedules.</li><li>Diagnose system faults and troubleshoot mechanical, electrical, and control issues.</li><li>Read and interpret drawings, schematics, and technical manuals.</li><li>Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly.</li><li>Monitor system performance and recommend improvements for efficiency.</li><li>Ensure compliance with HSE standards, local codes, and project quality requirements.</li><li>Maintain service reports, maintenance logs, and records.</li><li>Coordinate with supervisors, engineers, and other trades as required.</li><li>Respond to emergency breakdowns when required.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>About you</h2><h3>Qualifications &amp; Experience</h3><ul><li>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent.</li><li>Minimum 3 7 years of hands-on HVAC experience (project/facilities-based).</li><li>Strong knowledge of HVAC mechanical, electrical, and control systems.</li><li>Experience in GCC/UAE projects preferred.</li><li>Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</li></ul><h3>Skills &amp; Competencies</h3><ul><li>HVAC installation, testing &amp; commissioning.</li><li>Preventive &amp; breakdown maintenance.</li><li>Fault diagnosis &amp; troubleshooting.</li><li>Knowledge of refrigerants and handling procedures.</li><li>Ability to work from drawings and method statements.</li><li>Basic electrical &amp; control panel knowledge.</li><li>Good communication and teamwork skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Responsibilities:</b><br></p><br><ul><li>Fit, align, and assemble piping and structural components as per drawings.<br></li><li>Perform pipe fit-up, structural fitting, cutting, grinding, and material preparation.<br></li><li>Read and interpret isometric, structural, and fabrication drawings.<br></li><li>Coordinate with welders, fabricators, and supervisors during site activities.<br></li><li>Follow safety standards and ensure quality workmanship.<br></li></ul><br><span>Requirements</span><ul><li>ITI / Technical Certificate in Mechanical or relevant trade.<br></li><li>Minimum 3–5 years of experience in pipe and structural fitting works.<br></li><li>Strong knowledge of pipe alignment, flange fit-up, and structural assembly.<br></li><li>Experience in hand tools, power tools, and measuring instruments.<br></li><li>Available to join immediately.<br></li></ul><p><b>Location:</b> Qatar<br></p><br><span><span><span><span><span><span>Interested can share their CV and certificates to </span></span><span><span>celci@madre-me.com</span></span><span><span> | </span></span><span><span>resumes@madre-me.zohorecruitmail.com</span></span><span><span> | +974 3011 1048</span></span></span></span></span></span><br><br> </div>

<p>Mechanical Technician</p><ul><li><p>Perform dismantling, inspection, repair, assembly, and testing of rotating equipment.</p></li><li><p>Carry out maintenance and overhaul of gas turbines, steam turbines, turbo compressors, and reciprocating compressors.</p></li><li><p>Diagnose equipment issues and perform corrective repairs.</p></li><li><p>Conduct dimensional inspections using precision measuring instruments.</p></li><li><p>Interpret engineering drawings and technical documentation.</p></li><li><p>Support reverse engineering and component refurbishment activities.</p></li><li><p>Prepare inspection reports and maintenance records.</p></li><li><p>Ensure compliance with quality, safety, and workshop standards.</p></li></ul><p>Machinist</p><ul><li><p>Operate conventional horizontal lathes, boring machines, and milling machines.</p></li><li><p>Machine, repair, and refurbish components for rotating equipment.</p></li><li><p>Perform precision machining in accordance with engineering drawings and specifications.</p></li><li><p>Conduct dimensional inspections and maintain machining tolerances.</p></li><li><p>Support reverse engineering of worn or damaged components.</p></li><li><p>Prepare machining and inspection reports.</p></li><li><p>Maintain workshop equipment and ensure safe working practices.</p></li><li><p>CNC operation and programming experience will be an added advantage.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Diploma or Technical Certification in Mechanical Engineering, Machining, or a related technical discipline.</p></li><li><p>Minimum <strong>10 years of relevant experience</strong> in rotating equipment repair, maintenance, or precision machining.</p></li><li><p>Hands-on experience with <strong>gas turbines, steam turbines, turbo compressors, and reciprocating compressors</strong>.</p></li><li><p>Strong experience operating <strong>conventional horizontal lathes, boring machines, and milling machines</strong>.</p></li><li><p>Good understanding of mechanical fitting, overhaul, precision machining, and inspection techniques.</p></li><li><p>Ability to read and interpret engineering drawings and technical documentation.</p></li><li><p>Proficient in using precision measuring instruments such as micrometers, verniers, dial gauges, and bore gauges.</p></li><li><p>Knowledge of reverse engineering techniques; CAD software knowledge (AutoCAD, SolidWorks, Inventor, etc.) is an advantage.</p></li><li><p>Strong commitment to safety, quality, teamwork, and continuous improvement.</p></li><li><p>Good communication, analytical, and problem-solving skills.</p></li></ol>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview We are seeking a skilled HVAC Technician to install, operate, maintain, and repair heating, ventilation, and air conditioning systems for residential, commercial, or industrial facilities. The role ensures HVAC systems operate efficiently, safely, and in compliance with project specifications and applicable standards. Your role Install, test, commission, maintain, and repair HVAC systems including: Chillers, AHUs, FCUs, DX units, VRF/VRV systems. Split &amp; packaged units, exhaust/fresh air systems. Perform preventive and corrective maintenance as per schedules. Diagnose system faults and troubleshoot mechanical, electrical, and control issues. Read and interpret drawings, schematics, and technical manuals. Ensure refrigerant charging, pressure testing, vacuuming, and leak detection are conducted properly. Monitor system performance and recommend improvements for efficiency. Ensure compliance with HSE standards, local codes, and project quality requirements. Maintain service reports, maintenance logs, and records. Coordinate with supervisors, engineers, and other trades as required. Respond to emergency breakdowns when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div><b>Qualifications &amp; Experience</b><p>Diploma/ITI in HVAC, Mechanical Engineering, Refrigeration &amp; Air Conditioning, or equivalent.</p><p>Minimum 3 7 years of hands-on HVAC experience (project/facilities-based).</p><p>Strong knowledge of HVAC mechanical, electrical, and control systems.</p><p>Experience in GCC/UAE projects preferred.</p><p>Familiar with international standards (ASHRAE, SMACNA, CIBSE preferred).</p>Skills &amp; Competencies<ul><li>HVAC installation, testing &amp; commissioning.</li><li>Preventive &amp; breakdown maintenance.</li><li>Fault diagnosis &amp; troubleshooting.</li><li>Knowledge of refrigerants and handling procedures.</li><li>Ability to work from drawings and method statements.</li><li>Basic electrical &amp; control panel knowledge.</li><li>Good communication and teamwork skills.</li></ul></div><p></p></section>

<p><b>Knowledge &amp; Qualification:</b></p><p>Education: ITI Minimum 8 Years experience as Mechanical Technician (static equipment). Must have work experience in Petrochemical / Fertilizer Plant shutdown jobs in GCC countries. Good knowledge of safety standards and procedures. permit systems. Able to place and remove spades and open and close pipe flanges, recognise the gasket types and types of bolts. Trained and able to tighten bolts with a manual torque wrench. Able to perform an alignment with the reverse dial gauge method under supervision. Able to execute Hydrotest on piping and static equipment.</p><p>Role &amp; Responsibilities:</p><p>Mechanical Technician</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensuring ITR's, Punch Lists and exceptions are closed before offering completion certificate for approval. Supporting construction and commissioning teams to monitor the progress of the sub-system/system into systems completion data base. Monitor and track the Integrity of the Systems Completion Database (SCDB), monitor changes, data integrity and reporting. Including but not limited to: tag creation and verification, ITR's are properly defined and allocated as per approved Tag Type Matrix (TTM), document allocation, processing and transmitting; punch list creation, exception creation and tracking, report generation for various documentation and tracking purposes. Highlight inconsistency that may affect database integrity, tag verification and/or ITR allocation. Verify the completeness of CONTRACTOR's completion dossiers for mechanical completion, pre-commissioning, and commissioning through to handover to permanent asset. Review CONTRACTOR's work packs, tools, commissioning plans to ensure a smooth and safe hand-over to permanent organization. Monitor and verify CONTRACTOR's preservation activities meet project requirements. Coordinate, capture, and share SC Lessons Learned (LL) for inclusion in the project lessons learned register. Monitor progress and status of subsystems using the completion management system and ensure timely handovers. Ensure accurate and complete as-built documentation and certification dossiers for turnover to Operations. Oversee and control all mechanical completion (MC), pre-commissioning (CSA), and commissioning documentation (RFSU).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Applied Sciences or Engineering.</li><li>8 years' experience with large project commissioning in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles or oversight of service/vendor personnel.</li><li>Experience in Mechanical Completion and System Handover roles within oil &amp; gas, petrochemical, or large industrial projects.</li><li>Strong knowledge and understanding of certificate types and certification gates</li><li>Strong knowledge and understanding of Inspection Test Report (ITR) types and stages</li><li>Strong knowledge and understanding of punch list categorization</li><li>Experience in using Completion Management Systems (CMS) such as WinPCS, ICAPS, Hexagon or similar.</li><li>Familiarity with construction, QA/QC, and commissioning interfaces.</li><li>Excellent organizational, reporting, and communication skills.</li><li>Strong understanding of HSE standards and safe system handover practices.</li><li>A strong commitment to safety protocols and procedures in a site environment.</li><li>Effective leadership. Contractor coordination and reporting skills.</li><li>Strong organizational and technical judgment skills</li><li>Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities</li></ul><p></p></section>

The Mechanical Engineering (MEEN) Program of Texas A&M University at Qatar (http://www.qatar.tamu.edu/) invites applications for a full-time faculty position at the assistant level. The position is in the areas of robotics and autonomous systems, with preference given to candidates with expertise in emerging technologies with novel theoretical developments and practical applications, such as industrial robotics; control, autonomous systems; intelligent robotics for exploration, manufacturing, and construction; advanced sensor and actuation technologies; mechatronics and human-machine interaction and applications of artificial intelligence to robotics and autonomous systems. Faculty at Texas A&M University Qatar Campus (TAMUQ) are of two types: instructional track and research track. This position is a research-track position at the assistant level. The official title for this position is Research Assistant Professor, with the working title of Engineering Assistant Professor. Research-track faculty at TAMUQ are expected to teach undergraduate and graduate courses and develop an independent research program, as well as to engage through scholarship within the university and their discipline.<br><br>This non-tenure track position assumes a 9-month academic appointment with an anticipated start date of Spring 2024 or Fall 2024, depending on the applicant's availability. The hired faculty member is eligible to receive a startup package that covers the summer salary for three years. Following this period, faculty members at Texas A&M at Qatar have a 9-month appointment and may cover the salary of the remaining months from externally funded grants and/or teaching and services.<br><br>The Mechanical Engineering Program at Texas A&M University at Qatar (hqatar.tamu.edu/programs/mechanical-engineering/) currently has 10 faculty members who have a strong commitment to teaching, research, and service. The program benefits from state-of-the-art facilities and instrumentation supporting its key educational and research missions. There is support in Qatar for research from Qatar National Research Fund and industry. Faculty members may advise graduate students enrolled in degree programs at Texas A&M University.<br><br>Texas A&M University at Qatar's Mechanical Engineering Program has recently launched a high-impact research initiative that centers on smart and sustainable manufacturing. With the aim of transforming the manufacturing industry towards sustainability and digitization, the initiative brings together faculty from the main campus at College Station, Texas, and those based in Qatar to collaborate on groundbreaking research. We are seeking visionary and motivated faculty members to join our team and contribute to the development of this innovative initiative. As a part of this dynamic research platform, you will have the opportunity to work alongside world-class researchers, tap into state-of-the-art resources, and collaborate on impactful research projects.<br><br>The MEEN Program is fully committed to a culturally and academically diverse faculty. Therefore, candidates who can contribute further to the faculty diversity, equity, and inclusion are encouraged to apply. This position is in Qatar, a Gulf State in the Middle East, and the successful candidate must relocate to Doha, the capital of Qatar. Doha is a vibrant multicultural city that has excellent schools.<br><br>Texas A&M University at Qatar is a partnership with Qatar Foundation. Established in 2003, Texas A&M University at Qatar offers Bachelor of Science degrees in Chemical, Electrical and Computer, Mechanical, and Petroleum Engineering and a Master's Program in Chemical Engineering. Texas A&M at Qatar attracts some of the best high school graduates in the region. The degree programs are materially identical to those of the main campus at College Station, Texas. Texas A&M University diploma is awarded to graduates.<br><br>Doha is the home of Education City (https://www.qf.org.qa/education/higher-education), a dedicated campus devoted to research and education. In addition to Texas A&M at Qatar, the Education City campus hosts other academic institutions, including Weill Cornell Medicine-Qatar, Carnegie Mellon University, Virginia Commonwealth University, Northwestern University, and Georgetown University. As an international institution of higher learning, Texas A&M University at Qatar, and its partners in Education City, have significantly contributed to the development of post-secondary education and cultural growth in Qatar.<br><br>Texas A&M at Qatar offers a competitive salary package commensurate with rank and experience. The package includes housing, annual home leave allowances, dependent education, local transportation allowance, medical insurance for employees and dependents, plus appropriate relocation and repatriation expenses. Faculty members are also eligible for professional development funds to help them with teaching and curriculum development.<br><br>The ideal candidate should possess a doctorate degree in mechanical engineering or a closely related field. The candidate should have a demonstrated scholarly record in the area of robotics and smart systems with a relevant Ph. D. dissertation and publications in reputable journals. The successful candidate is expected to have a strong commitment to teaching excellence, developing a viable research program, and service at the professional and institutional levels.<br><br>The application priority deadline for full consideration is September 1, 2023. However, applications will be accepted until the position is filled. All application materials should be uploaded to Interfolio at: http://apply.interfolio.com/119038 Applicants may also send inquiries to (meen.search.committee@qatar.tamu.edu). The required documents are:<br><br>Cover letter Resume Research and teaching (not to exceed 3 pages in total) Contact information of 4 references who will send letters when requested<br><br><br>Three reference letters will be required for the shortlisted candidates.<br><br>Equal Employment Opportunity Statement<br><br>Equal Opportunity/Veterans/Disability Employer.

The Mechanical Engineering (MEEN) Program of Texas A&M University at Qatar (http://www.qatar.tamu.edu/) invites applications for a full-time faculty position at the assistant level. The position is in the areas of robotics and autonomous systems, with preference given to candidates with expertise in emerging technologies with novel theoretical developments and practical applications, such as industrial robotics; control, autonomous systems; intelligent robotics for exploration, manufacturing, and construction; advanced sensor and actuation technologies; mechatronics and human-machine interaction and applications of artificial intelligence to robotics and autonomous systems. Faculty at Texas A&M University Qatar Campus (TAMUQ) are of two types: instructional track and research track. This position is a research-track position at the assistant level. The official title for this position is Research Assistant Professor, with the working title of Engineering Assistant Professor. Research-track faculty at TAMUQ are expected to teach undergraduate and graduate courses and develop an independent research program, as well as to engage through scholarship within the university and their discipline.<br><br>This non-tenure track position assumes a 9-month academic appointment with an anticipated start date of Spring 2024 or Fall 2024, depending on the applicant's availability. The hired faculty member is eligible to receive a startup package that covers the summer salary for three years. Following this period, faculty members at Texas A&M at Qatar have a 9-month appointment and may cover the salary of the remaining months from externally funded grants and/or teaching and services.<br><br>The Mechanical Engineering Program at Texas A&M University at Qatar (hqatar.tamu.edu/programs/mechanical-engineering/) currently has 10 faculty members who have a strong commitment to teaching, research, and service. The program benefits from state-of-the-art facilities and instrumentation supporting its key educational and research missions. There is support in Qatar for research from Qatar National Research Fund and industry. Faculty members may advise graduate students enrolled in degree programs at Texas A&M University.<br><br>Texas A&M University at Qatar's Mechanical Engineering Program has recently launched a high-impact research initiative that centers on smart and sustainable manufacturing. With the aim of transforming the manufacturing industry towards sustainability and digitization, the initiative brings together faculty from the main campus at College Station, Texas, and those based in Qatar to collaborate on groundbreaking research. We are seeking visionary and motivated faculty members to join our team and contribute to the development of this innovative initiative. As a part of this dynamic research platform, you will have the opportunity to work alongside world-class researchers, tap into state-of-the-art resources, and collaborate on impactful research projects.<br><br>The MEEN Program is fully committed to a culturally and academically diverse faculty. Therefore, candidates who can contribute further to the faculty diversity, equity, and inclusion are encouraged to apply. This position is in Qatar, a Gulf State in the Middle East, and the successful candidate must relocate to Doha, the capital of Qatar. Doha is a vibrant multicultural city that has excellent schools.<br><br>Texas A&M University at Qatar is a partnership with Qatar Foundation. Established in 2003, Texas A&M University at Qatar offers Bachelor of Science degrees in Chemical, Electrical and Computer, Mechanical, and Petroleum Engineering and a Master's Program in Chemical Engineering. Texas A&M at Qatar attracts some of the best high school graduates in the region. The degree programs are materially identical to those of the main campus at College Station, Texas. Texas A&M University diploma is awarded to graduates.<br><br>Doha is the home of Education City (https://www.qf.org.qa/education/higher-education), a dedicated campus devoted to research and education. In addition to Texas A&M at Qatar, the Education City campus hosts other academic institutions, including Weill Cornell Medicine-Qatar, Carnegie Mellon University, Virginia Commonwealth University, Northwestern University, and Georgetown University. As an international institution of higher learning, Texas A&M University at Qatar, and its partners in Education City, have significantly contributed to the development of post-secondary education and cultural growth in Qatar.<br><br>Texas A&M at Qatar offers a competitive salary package commensurate with rank and experience. The package includes housing, annual home leave allowances, dependent education, local transportation allowance, medical insurance for employees and dependents, plus appropriate relocation and repatriation expenses. Faculty members are also eligible for professional development funds to help them with teaching and curriculum development.<br><br>The ideal candidate should possess a doctorate degree in mechanical engineering or a closely related field. The candidate should have a demonstrated scholarly record in the area of robotics and smart systems with a relevant Ph. D. dissertation and publications in reputable journals. The successful candidate is expected to have a strong commitment to teaching excellence, developing a viable research program, and service at the professional and institutional levels.<br><br>The application priority deadline for full consideration is September 1, 2023. However, applications will be accepted until the position is filled. All application materials should be uploaded to Interfolio at: http://apply.interfolio.com/119038 Applicants may also send inquiries to (meen.search.committee@qatar.tamu.edu). The required documents are:<br><br>Cover letter Resume Research and teaching (not to exceed 3 pages in total) Contact information of 4 references who will send letters when requested<br><br><br>Three reference letters will be required for the shortlisted candidates.<br><br>Equal Employment Opportunity Statement<br><br>Equal Opportunity/Veterans/Disability Employer.

The Mechanical Engineering (MEEN) Program of Texas A&M University at Qatar (http://www.qatar.tamu.edu/) invites applications for a full-time faculty position at the assistant level. The position is in the areas of robotics and autonomous systems, with preference given to candidates with expertise in emerging technologies with novel theoretical developments and practical applications, such as industrial robotics; control, autonomous systems; intelligent robotics for exploration, manufacturing, and construction; advanced sensor and actuation technologies; mechatronics and human-machine interaction and applications of artificial intelligence to robotics and autonomous systems. Faculty at Texas A&M University Qatar Campus (TAMUQ) are of two types: instructional track and research track. This position is a research-track position at the assistant level. The official title for this position is Research Assistant Professor, with the working title of Engineering Assistant Professor. Research-track faculty at TAMUQ are expected to teach undergraduate and graduate courses and develop an independent research program, as well as to engage through scholarship within the university and their discipline.<br><br>This non-tenure track position assumes a 9-month academic appointment with an anticipated start date of Spring 2024 or Fall 2024, depending on the applicant's availability. The hired faculty member is eligible to receive a startup package that covers the summer salary for three years. Following this period, faculty members at Texas A&M at Qatar have a 9-month appointment and may cover the salary of the remaining months from externally funded grants and/or teaching and services.<br><br>The Mechanical Engineering Program at Texas A&M University at Qatar (hqatar.tamu.edu/programs/mechanical-engineering/) currently has 10 faculty members who have a strong commitment to teaching, research, and service. The program benefits from state-of-the-art facilities and instrumentation supporting its key educational and research missions. There is support in Qatar for research from Qatar National Research Fund and industry. Faculty members may advise graduate students enrolled in degree programs at Texas A&M University.<br><br>Texas A&M University at Qatar's Mechanical Engineering Program has recently launched a high-impact research initiative that centers on smart and sustainable manufacturing. With the aim of transforming the manufacturing industry towards sustainability and digitization, the initiative brings together faculty from the main campus at College Station, Texas, and those based in Qatar to collaborate on groundbreaking research. We are seeking visionary and motivated faculty members to join our team and contribute to the development of this innovative initiative. As a part of this dynamic research platform, you will have the opportunity to work alongside world-class researchers, tap into state-of-the-art resources, and collaborate on impactful research projects.<br><br>The MEEN Program is fully committed to a culturally and academically diverse faculty. Therefore, candidates who can contribute further to the faculty diversity, equity, and inclusion are encouraged to apply. This position is in Qatar, a Gulf State in the Middle East, and the successful candidate must relocate to Doha, the capital of Qatar. Doha is a vibrant multicultural city that has excellent schools.<br><br>Texas A&M University at Qatar is a partnership with Qatar Foundation. Established in 2003, Texas A&M University at Qatar offers Bachelor of Science degrees in Chemical, Electrical and Computer, Mechanical, and Petroleum Engineering and a Master's Program in Chemical Engineering. Texas A&M at Qatar attracts some of the best high school graduates in the region. The degree programs are materially identical to those of the main campus at College Station, Texas. Texas A&M University diploma is awarded to graduates.<br><br>Doha is the home of Education City (https://www.qf.org.qa/education/higher-education), a dedicated campus devoted to research and education. In addition to Texas A&M at Qatar, the Education City campus hosts other academic institutions, including Weill Cornell Medicine-Qatar, Carnegie Mellon University, Virginia Commonwealth University, Northwestern University, and Georgetown University. As an international institution of higher learning, Texas A&M University at Qatar, and its partners in Education City, have significantly contributed to the development of post-secondary education and cultural growth in Qatar.<br><br>Texas A&M at Qatar offers a competitive salary package commensurate with rank and experience. The package includes housing, annual home leave allowances, dependent education, local transportation allowance, medical insurance for employees and dependents, plus appropriate relocation and repatriation expenses. Faculty members are also eligible for professional development funds to help them with teaching and curriculum development.<br><br>The ideal candidate should possess a doctorate degree in mechanical engineering or a closely related field. The candidate should have a demonstrated scholarly record in the area of robotics and smart systems with a relevant Ph. D. dissertation and publications in reputable journals. The successful candidate is expected to have a strong commitment to teaching excellence, developing a viable research program, and service at the professional and institutional levels.<br><br>The application priority deadline for full consideration is September 1, 2023. However, applications will be accepted until the position is filled. All application materials should be uploaded to Interfolio at: http://apply.interfolio.com/119038 Applicants may also send inquiries to (meen.search.committee@qatar.tamu.edu). The required documents are:<br><br>Cover letter Resume Research and teaching (not to exceed 3 pages in total) Contact information of 4 references who will send letters when requested<br><br><br>Three reference letters will be required for the shortlisted candidates.<br><br>Equal Employment Opportunity Statement<br><br>Equal Opportunity/Veterans/Disability Employer.