Male Nurse Jobs in Qatar

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><h4>Additional Qualifications:</h4><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption.</li><li>Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption.</li><li>Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants. Minimum of 5 years working experience is required for this position

<p><b>Qualifications:</b></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p><b>Additional Qualifications:</b></p><p>· Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.&nbsp; &nbsp; &nbsp; Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2.&nbsp; &nbsp; &nbsp; Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.&nbsp; &nbsp; &nbsp; Air Compressor</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;4.&nbsp; &nbsp; &nbsp; AHU fans and blower</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;5.&nbsp; &nbsp; &nbsp; Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;6.&nbsp; &nbsp; &nbsp; Mechanical forklift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;7.&nbsp; &nbsp; &nbsp; Mechanical manlift</p><p><br></p><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;8.&nbsp; &nbsp; &nbsp; Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</li><li>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</li><li>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</li><li>3. Air Compressor</li><li>4. AHU fans and blower</li><li>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</li><li>6. Mechanical forklift</li><li>7. Mechanical manlift</li><li>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</li><li>Supervise, guide, and monitor work done by external vendors.</li><li>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</li><li>Obtain spare parts, materials, and consumables either from internal store or external location.</li><li>Utilize, maintain and safe keep specific tools assigned by company.</li><li>Maintain proper tools, PPE s, Spares and provide annual requirements.</li><li>Respond to emergency situations during or after hours as part of business continuity.</li><li>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</li><li>Where applicable, aid and support to other team members within and across the discipline, whenever required.</li><li>Participate in QC provided training as deemed fit by management.</li><li>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ol><li>Prepare all related vehicle registration papers, delivery papers </li><li>Coordinate with sales, PDI, delivery , service centre, admin to track the vehicle after sales work done from sales side </li><li>Brief customer the vehicle features during delivery by English or Arabic </li><li>Brief service schedule and service center location, hotline&nbsp;related with after sales </li><li>Guide customer sign all required papers </li><li>Assist marketing team to take photos or videos during delivery ceremony </li><li>Arranging delivery ceremony for customers&nbsp;</li></ol><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ol><li>Arabic speaker, has knowledge about basic Microsoft office software and familiar with online working platform </li><li>Fluent in English ( mandatory ) reading and writing. </li><li>Not more than 40 years </li><li>Have valid driving license </li><li>Prefer male gender&nbsp;</li></ol><p><br></p></div>

<strong>Responsibilities<br><br></strong><strong>Job Description<br><br></strong><ul><li> Provide comprehensive medical care and management for patients with a variety of internal medicine conditions.</li><li> Conduct thorough patient assessments, including history taking, physical examinations, and diagnostic evaluations.</li><li> Develop and implement individualized treatment plans based on patient needs and current medical guidelines.</li><li> Collaborate with a multidisciplinary team to ensure high-quality patient care and effective treatment strategies.</li><li> Offer emergency support and interventions for acute medical situations within the clinic setting.</li><li> Maintain accurate and timely clinical documentation, ensuring compliance with regulatory and clinic standards.</li><li> Guide patients and their families through treatment plans, providing education and support as necessary.</li><li> Participate in clinic meetings and contribute to the continuous improvement of clinical practices and patient outcomes.<br><br></li></ul>1- Male, 1- Female.<br><br><strong>Location<br><br></strong>Doha, Qatar, Qatar, Qatar 00000<br><br><strong>Qualification<br><br></strong>MD / DNB Internal Medicine<br><br><strong>Department<br><br></strong>Internal Medicine

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p>

<ol><li><p>Handle daily office administration and documentation.</p></li><li><p>Prepare quotations, contracts, invoices, emails, reports, and other documents.</p></li><li><p>Coordinate with operations, sales, and management teams.</p></li><li><p>Maintain accurate records, files, and client information.</p></li><li><p>Follow up on emails, approvals, payments, and pending tasks.</p></li><li><p>Assist with basic HR and accounting-related administrative tasks when required.</p></li><li><p>Perform data entry and maintain office records.</p></li><li><p>Support general office operations and administrative activities.</p></li><li><p>Communicate with clients, employees, suppliers, and other stakeholders when required.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Minimum <strong>1 year of Administration experience in Qatar</strong>.</p></li><li><p>Previous experience in a similar <strong>Admin Assistant / Administrator</strong> role.</p></li><li><p><strong>Valid NOC</strong> must be available.</p></li><li><p>Strong <strong>English and Arabic communication skills</strong>.</p></li><li><p><strong>Arabic typing is required.</strong></p></li><li><p>Good knowledge of <strong>MS Office, especially Word and Excel</strong>.</p></li><li><p>Must be <strong>currently residing in Qatar</strong>.</p></li><li><p><strong>Sri Lankan or Nepali nationality preferred – Male candidates only.</strong></p></li><li><p>Must be available for <strong>immediate joining</strong>.</p></li><li><p>Good organizational skills and attention to detail.</p></li><li><p>Ability to work under pressure and meet deadlines.</p></li></ol>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p><ul ><li >Candidates must have at least Vocational Diploma / Short Course Certificate</li><li >The job requires Male applicants.</li><li >Minimum of 5 years working experience is required for this position</li><li >Safety Observation<br>Raise SO in CMMS when found during shift.</li><li >Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li >Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li >Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li >PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li >Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li >Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li >Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li >System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li >System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li >Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li >Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li >Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li >Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li >Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li >Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li >Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate. The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate. The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>We are seeking an experienced and highly qualified <strong>School Operations Supervisor</strong> to oversee and manage food service operations across <strong>12 schools</strong>.</p><p>The ideal candidate must have strong operational knowledge and the ability to ensure compliance with the highest standards of food quality, safety, and service excellence.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Key Responsibilities & Requirements:</strong></p><ul><li><p>Proven experience and strong knowledge of <strong>Food Safety Management Systems (FSMS)</strong>, HACCP principles, and health & hygiene regulations.</p></li><li><p>Ability to develop, manage, and optimize <strong>staff schedules, duty rosters, and transportation plans</strong>.</p></li><li><p>Strong understanding of <strong>food quality control</strong>, including receiving procedures, product inspection, storage standards, and service quality monitoring.</p></li><li><p>Excellent knowledge of <strong>food safety requirements, municipality regulations, and restaurant hygiene standards</strong>.</p></li><li><p>Ability to conduct regular school visits, monitor operations, and ensure compliance across all locations.</p></li><li><p>Excellent command of <strong>English language</strong>, both written and verbal.</p></li><li><p>Strong communication and leadership skills with the ability to interact professionally with <strong>students, teachers, school management, and employees</strong>.</p></li><li><p><strong>Valid driving license is required.</strong></p></li></ul><p><br><br></p><p><strong>Candidate Profile:</strong></p><ul><li><p>Open to all nationalities.</p></li><li><p>Open to both male and female candidates.</p></li><li><p>Must be organized, responsible, proactive, and capable of managing multiple locations efficiently.</p></li></ul>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service. Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Principal: Qatar District Cooling Company</p><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</p><p>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>Provide tuning for controls and equipment.</p><p>Test equipment and controls after maintenance has been done.</p><p>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</p><p>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.<br>Check and maintain existing wiring installations for all Low Current System and Control System equipment.<br>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.<br>Provide tuning for controls and equipment.<br>Test equipment and controls after maintenance has been done.<br>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.<br>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service<br>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.<br>May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p><p><strong>Desired Candidate Profile</strong></p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position