Inspection Engineer Jobs in Qatar 2026

Full Time

Data Network L2 Engineer

On-site - Qatar - Doha 10 August 2026

Information Technology

Job Title – Data Network L2 Engineer / MPLS / SD-WAN Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description: Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Diagnose complex issues related to:MPLS L3VPN / L2VPN failures Routing issues (BGP, OSPF, Static routes) SD-WAN overlay/underlay instability Latency, jitter, packet loss Perform deep analysis using CLI, logs, and monitoring tools 2. Incident Resolution & Service Restoration Own P1/P2 incidents escalated by L1Restore services within MTTR targets Troubleshoot:PE/CE connectivity issues VRF routing problems Tunnel failures (IPSec/SD-WAN) QoS-related degradation 3. Routing & Protocol Analysis Hands-on experience in:BGP (peering, route propagation issues) OSPF (neighbourship, LSDB issues) MPLS labels & forwarding Identify routing loops, flaps, asymmetry 4. SD-WAN Operations Troubleshoot SD-WAN solutions (Viptela, Meraki, Fortinet etc.) Validate:Edge device status Control connections Overlay tunnels Policy/config issues 5. Root Cause Analysis (RCA) Perform detailed RCA for major incidents Identify root causes:Config issues Hardware/software fault ISP/backhaul issues Policy misconfigurations Provide Corrective & Preventive Actions (CAPA) 6. Change & Implementation Support Validate and support:Network changes Config modifications Routing updates Device upgrades Ensure impact assessment and rollback readiness 7. Vendor & Stakeholder Management Coordinate with:OEMs (Cisco, Juniper, Fortinet, etc.) ISPs / carrier providers Manage vendor escalations and TAC cases 8. Performance & Stability Improvement Analyze recurring incidents Drive network optimization Recommend improvements for:Routing stability Bandwidth optimization SD-WAN policy tuning 9. L1 Support & Governance Guide L1 team on troubleshooting Improve SOPs and knowledge base Ensure quality checks on ticket handling Required Technical Skills Strong expertise in:MPLS (L2/L3 VPN) Routing protocols – BGP, OSPFTCP/IP stack SD-WAN architecture (Viptela/Meraki/Fortinet) Hands-on in:CLI troubleshooting Network logs & packet analysis Knowledge of:QoS, SLA tracking Redundancy & failover mechanisms Experience & Qualification3–7 Years experience B. Tech / Diploma (Telecom / Networking / IT) Certifications:CCNA/CCNP (preferred) SD-WAN certification (added advantage) Key KPIsMTTR reduction RCA quality & timeliness High severity incident resolution Repeat issue reduction Change success rate Vendor coordination TAT C. Common Competencies (L1 & L2) Strong understanding of:NOC / Service Assurance processes Incident / Problem / Change management Tools:Service Now / Remedy / Jira Monitoring tools (NMS/EMS) Soft Skills:Communication (customer & internal) Stakeholder management Ability to work in 24x7 shifts. Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

Full Time

Information Technology Support Engineer

On-site - Qatar - Doha 3 August 2026

Accounting, Finance & Banking

Job Brief The IT Technical Support Engineer is responsible for installing, maintaining, troubleshooting, and supporting the company’s IT infrastructure, systems, and end-user devices. The role ensures the availability, security, and reliability of IT services by providing technical support, maintaining hardware and software, resolving network and system issues, and assisting with data center operations. Key Responsibilities * Install, configure, and maintain user workstations, laptops, printers, and peripheral devices. * Install, configure, and troubleshoot operating systems, software applications, and hardware components. * Provide first and second-level technical support to employees and resolve IT-related incidents in a timely manner. * Monitor and maintain the integrity, availability, and security of IT systems across the organization. * Monitor server performance, network connectivity, and system health. * Assist in the administration and monitoring of Active Directory, user accounts, and access permissions. * Perform routine system maintenance, updates, and preventive maintenance activities. * Assist in managing and monitoring backup systems and ensure successful backup operations. * Monitor and maintain voice recording systems and support call retrieval when required. * Support the administration of ticker systems, market data displays, and information display walls. * Assist with monitoring data center infrastructure, including UPS systems, air conditioning, environmental monitoring, and safety equipment. * Monitor and support CCTV and access control systems. * Maintain accurate records of IT assets, software licenses, warranties, inventory, and maintenance contracts. * Coordinate with vendors for IT procurement, maintenance, warranty claims, and technical support. * Evaluate hardware and software solutions for future procurement. * Maintain technical documentation and ensure IT assets are properly tracked. * Participate in developing and improving IT policies, procedures, and operational standards. * Work closely with other IT team members to support business operations. * Comply with all company policies, procedures, and information security standards. * Perform any other duties assigned by management. Qualifications & Requirements * Bachelor’s degree in Computer Engineering, Network Engineering, Computer Science, Information Technology, or a related field. * Minimum of 5 years of experience in IT Technical Support or System Administration. * Strong experience supporting Microsoft Windows operating systems and Apple mac OS. * Good knowledge of TCP/IP networking, switches, and basic network troubleshooting. * Experience administering Microsoft Active Directory, Group Policy, DNS, and DHCP. * Strong experience installing, configuring, and troubleshooting Windows desktop and server environments. * Experience with Microsoft 365 and Microsoft Office applications. * Experience with IT asset management, inventory control, and software licensing. * Experience with hardware installation, maintenance, and troubleshooting. * Experience working with network and system monitoring tools. * Experience supporting CCTV and access control systems. * Familiarity with data center operations and environmental monitoring. * Experience coordinating with external vendors for procurement and technical support. * Good documentation, communication, and problem-solving skills. * Ability to work independently and manage multiple priorities. Preferred Certifications * Microsoft Certified Solutions Associate (MCSA) (or its current Microsoft equivalent) * Microsoft Certified Solutions Expert (MCSE) (or its current Microsoft equivalent) * Cisco Certified Network Associate (CCNA) * Comp TIA A+ (preferred) * ITIL Foundation (preferred)

Full Time

Information Technology Support Engineer

On-site - Qatar - Doha 3 August 2026

Accounting, Finance & Banking

Full Time

System Engineer

On-site - Qatar - Doha 21 July 2026

Aviation & Maritime

Job description: Smarter, Better, Now. ADB SAFEGATE’s functional teams are integral to powering innovation and ensuring operational excellence across the organization.   The Opportunity The System Engineer objectives are; Manages the maintenance of Airfield Lighting Control Monitoring System (ALCMS), SAM, and AiPRON Manager systems. Oversees the maintenance of the constant current regulators and ILCMS. Manages the maintenance of Auxiliary Electronic Systems including Fire Detection/Alarm, BMS, and VoIP Plans and implements activities to meet those needs and does related work as required Job Description; Manages the System/ALCMS/SAM/AiPRON Manager maintenance team with direct responsibility for the maintenance of electronics systems and devices installed. Analyses equipment failures and determines root cause. Assesses and reports about safety hazards involved in the maintenance activities. Enforces safety rules and regulations. Manages a team of Technicians, including supervision, planning, organization, and evaluation of work. Adjust assignments, procedures and schedules as necessary. Trains other employees and supports performance evaluations. Schedules and assigns work including overtime, vacations, and time off. Manages the execution of maintenance tasks under defined scope. Reviews records and reports related to ALCMS/SAM/AiPRON maintenance. Inspects airport facilities and recommends corrective action. Utilizes a computerized maintenance management system for scheduling maintenance. Overseas and reviews work performed by external parties and subcontractors. Supports management in overall execution of maintenance operations. Recommends additional capital equipment and spare parts requirements. Skills Familiar with Airside Operations, rules and best practices Excellent written and oral communications skills Excellent managing and leadership skills as well as staff development capability Multi-language, international & intercultural experience. Strong scheduling, planning and reporting skills Customer oriented Result and target oriented Safety awareness Self-propelled individual Required Experience: 5 years of experience in electronics equipment and SCADA systems Competent in AGL regulatory QCAR/ICAO/BAA/FAA framework Knowledge of the operation and maintenance of Airfield Lighting Skilled in the use of standard and specialized tools used in this work Ability to interpret, understand and effectively carry out complex oral and written technical instructions Ability to prepare detailed reports and submit recommendations for improved maintenance operations Ability to establish and maintain effective working relationships with associates and airport operator Considerable ability to supervise, train, motivate and inspect the work of subordinates Requirements: Language know-how: English (Nr 1 priority), any other language is an asset. Qatari Driving License If you want to join a global business and enjoy being a team player who's driven and passionate, then this is your opportunity to come on board by applying! What to learn more about working at ADB SAFEGATE then check out our Career's website https://adbsafegate.com/about/career/ We offer: What to learn more about working at ADB SAFEGATE then check out our Career's website https://adbsafegate.com/about/career/

Full Time Bayt

Video Surveillance (CCTV) & Servers Engineer

On-site - Qatar - Doha 12 September 2026

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Video Surveillance (CCTV) & Servers Engineer Responsibilities <ul><li>Provide Level-3 technical support for video-surveillance systems, recording servers, storage, and associated security servers. </li><li>Perform advanced troubleshooting at system, application, and infrastructure levels. </li><li>Conduct root-cause analysis for major and recurring incidents. </li><li>Coordinate OEM support cases and ensure permanent technical resolution. </li><li>Manage system configuration, firmware, software maintenance, releases, and upgrades. </li><li>Develop and maintain preventive-maintenance and predictive-monitoring procedures. </li><li>Maintain system design documents, SOPs, and technical knowledge bases. </li><li>Mentor Level-2 technicians and assess their technical competency. </li><li>Support Change Advisory Board assessments for system changes. </li><li>Maintain VMS, recording servers, storage, camera systems, recording, retention, failover, and analytics </li></ul> RequirementsRequirements <ul><li>Minimum 5 years of hands-on experience with video-surveillance systems in a comparable environment. </li><li>Valid Milestone certification through an authorised channel. </li><li>Strong experience with VMS, servers, and storage systems. </li><li>ITIL Foundation certification. </li><li>Strong troubleshooting and root-cause-analysis skills. </li><li>Experience handling OEM technical support and escalations. </li><li>Strong documentation and mentoring capability. </li><li>Good knowledge of system monitoring, recording, retention, and failover. </li><li>Ability to comply with airport security, HSE, and cyber-security requirements. </li></ul>Interested candidates can send cv to 31313903/ bency@madre-me.com </div>

Full Time LinkedIn

Principal Piping Engineer

On-site - Qatar - Doha 16 August 2026

Information Technology

Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now. Key Responsibilities Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Identifies software necessary to enable piping group to function effectively. Provide specialist technical support, supervision and advice to the discipline and project teams; participate in peer reviews; Ensures recognised onshore & offshore engineering practices applicable to piping design and topside/plant layout are adopted within the discipline. Knows the project and discipline scope/cost/time requirements, ensures the team to meets the expectations, and liaises with other disciplines to ensure project success. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, drives squad checking, recommends improvements, and takes action where required. Collaborates with project team in review of project documentation such as proposals, estimates, budgets and schedules. Leads weekly piping meetings, reviews progress reports and required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Establish a list of discipline deliverables. Controls, monitors and progresses these deliverables to an agreed schedule. Lead the production of detailed designs and drawings, specifications, data, calculations and reports . HSE Capability Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being.healthy and safe workplaces and activities. Industry Specific Experience Extensive Piping Engineering experience at a senior level within the Oil & Gas industry in both Onshore and Offshore projects. Design & Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers. Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams. Expertise on stress (unbalanced / transient conditions), complicated hot-tapping plugging of C3/C4 services, Inconel 625 materials specs and datasheets Qualifications Education – Qualifications, Accreditation, Training: Full-Time bachelor’s degree in mechanical engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage. Moving forward together We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law. We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Full Time

Licensed Aircraft Engineer - Line Maintenance (B1)

On-site - Qatar - Doha 5 August 2026

Aviation & Maritime

About the role: We are currently recruiting for Licensed Aircraft Engineers (B1) under Line Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer (B1), you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes: Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task. Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before. Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members. Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before. Together, everything is possible How to apply :If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

Full Time

Aircraft Engineer

On-site - Qatar - Doha 5 August 2026

Aviation & Maritime

About the role: We are currently recruiting for Licensed Aircraft Engineers (B2) under Line Maintenance – Technical Engineering in Doha. As Licensed Aircraft Engineer (B2), you will be responsible to deliver aircraft maintenance activities to directly support flight operations maintenance checks and duties within your authority. You will provide specialized knowledge skills and expertise and ensuring safe, effective and efficient operation. Specific responsibilities within the role includes: Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways and Customer procedures. Review of work procedures and standards, propose improvements were procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished. Ensure tasks are performed to meet company/ customer standards and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his/her range of authority. Aircraft or components serviceability standards are maintained to meet schedule requirements. Management & Leadership:Supervise a team of mechanics or technical assistants, ascertaining task are efficiently performed and comply with procedures and meet task objectives. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. Establish the teams objectives and priorities to align with and support business objectives. Regularly evaluate the teams’ objectives, plans , and procedures and revise when needed. Ensuring staff under his immediate controls adhere to published technical and safety requirements defined in publishing manuals,Customer procedures and other publications. Defining priorities to the staff allocated to him to ensure that efficient use of resources is channeled to perform the tasks allocated and meet schedules and planned check activities. When supervising the work of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task. Be part of an extraordinary story:Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before. Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members. Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before. Together, everything is possible How to apply :If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

Full Time Bayt

Application Engineer

On-site - Qatar - Doha 9 September 2026

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary The Application Engineer assists customers by identifying the best solution for their application, offers and sells complete product solutions from the Flow Controls portfolio, provides commercial and technical support to customers, and strives to deliver the highest standards of customer service while working closely with peers, Outside Sales, Service Engineers, Business Managers, and other stakeholders. The Application Engineer will be based in Kuwait or Qatar. Key customers include NOC, Dolphin Energy, QAFCO, QChem, QELNG, and QE in Qatar, as well as KOC, KNPC, and Equate in Kuwait. In This Role, Your Responsibilities Will Be: <ul><li>Provide Applications Engineering, technical, and pricing support to customers in Qatar and Kuwait, including technical presentations and site walkdowns.</li><li>Perform sizing and selection of control valves and other FCV products, review project specifications, and prepare deviation lists.</li><li>Prepare customer quotations that are timely, technically accurate, commercially verified, and offer the best overall solution.</li><li>Conduct direct customer technical sales calls, order closeouts, site walkdowns, and prepare associated reports.</li><li>Coordinate with GIS and Engineering teams to conduct root cause analysis and develop solutions for severe-service applications and complex products.</li><li>Present detailed technical solutions and recommendations to customers.</li><li>Follow up on quotations with customers and the outside sales team until purchase orders are secured.</li><li>Ensure purchase orders are commercially and technically compliant before order entry and process error-free orders to the appropriate factories.</li><li>Coordinate with Project Management, Order Entry, and Customer Order Fulfillment (COF) teams to provide clean orders to factories and support customers with post-order documentation and requirements.</li><li>Collaborate with the Flow Control Sales Manager and Application Manager to achieve sales targets and departmental KPIs.</li><li>Maintain records and information within Emerson systems and tools, including SharePoint and CRM platforms.</li><li>Ensure compliance with Emerson Trade Compliance, Quality Management procedures, and Ethics policies.</li><li>Stay current with product developments, industry trends, and market requirements.</li></ul>Who You Are <ul><li>Experienced in control valve products, applications, and Fisher sizing and selection tools.</li><li>Experienced in selling control valve products and services to hydrocarbon, chemical, and petrochemical end users.</li><li>Knowledgeable in industrial standards related to control valve design, manufacturing, and testing processes.</li></ul>For This Role, You Will Need <ul><li>Minimum 5 to 8 years of experience in the process control industry, including control valve products and applications.</li><li>Bachelor’s degree in Engineering (Instrumentation, Mechanical, Chemical) or equivalent.</li></ul>Preferred Qualifications That Set You Apart <ul><li>Experience with control valve sizing and selection tools, including Fisher FF2.</li><li>Strong interpretation skills related to engineering drawings, specifications, and P&ID documentation.</li><li>Excellent communication and presentation skills.</li><li>Ability to make sound technical decisions based on engineering principles, standards, and applicable codes.</li><li>Ability to interact effectively with customers and adapt to diverse cultural environments.</li></ul>Our Culture and Commitment To You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results. We recognise the importance of employee wellbeing and offer competitive benefits designed to support the physical, mental, financial, and social needs of employees and their families. Our offerings include medical insurance, employee assistance programmes, tuition reimbursement, employee resource groups, recognition programmes, and additional wellbeing resources. We also support work-life balance through flexible time-off programmes, including parental leave, vacation, and holiday benefits. At Emerson, learning and development are integral to career growth. From onboarding through senior leadership development, employees have access to a wide range of opportunities, including instructor-led and virtual training, mentoring, coaching, project assignments, and hands-on learning experiences that help build skills and advance careers. WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you’re an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you’ll find your chance to make a difference with Emerson. Join our team – let’s go! No calls or agencies please.  </div>

Full Time Bayt

Lead Cost Control Engineer

On-site - Qatar - Doha 7 August 2026

Accounting, Finance & Banking

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary The Lead Cost Control Engineer is responsible to manage and optimize project expenditures throughout the construction lifecycle, ensuring adherence to budgetary constraints, including overseeing cost estimation, tracking, and reporting processes, identifying variances and implementing corrective actions to maintain financial targets. Through meticulous analysis and strategic planning, the role maximizes cost efficiency and support the timely delivery of high-quality projects. Job Responsibilities 1 Develop and implement cost control procedures and systems to monitor project expenditures and ensure adherence to budgetary constraints. Collaborate with project managers and stakeholders to establish project budgets, cost forecasts, and expenditure plans. Conduct detailed cost estimation and analysis for project components, materials, labor, and overhead expenses. Track and analyze project costs, identifying variances, trends, and potential cost-saving opportunities. Prepare regular cost reports and presentations for project stakeholders, highlighting key financial metrics and performance indicators. Review contractor and vendor invoices, verifying accuracy and adherence to contract terms and pricing agreements. Evaluate change orders and variations to assess their impact on project costs and timelines, and negotiate with stakeholders as necessary. Implement cost control measures to mitigate risks and minimize cost overruns, including value engineering and cost-saving initiatives. Provide guidance and support to project teams on cost-related matters, offering recommendations for cost-effective solutions and strategies. Continuously monitor market trends, pricing fluctuations, and regulatory changes that may impact project costs, and adjust cost control strategies accordingly. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies Job Responsibilities 2 Additional Responsibilities 3 Job Knowledge & Skills Proficiency in financial analysis techniques to assess project costs, identify trends, and analyze variances. This includes knowledge of financial modeling, cost estimation methodologies, and understanding of accounting principles. Strong project management skills to effectively plan, organize, and prioritize tasks related to cost control activities. This includes the ability to coordinate with multiple stakeholders, manage timelines, and ensure alignment with project objectives. Familiarity with cost control software and tools such as Primavera, Procore, or similar platforms used for budget tracking, forecasting, and reporting. Proficiency in using spreadsheets and database software for data analysis and reporting is also essential. Knowledge of contract management principles and experience in reviewing contracts, change orders, and vendor agreements to ensure compliance with cost control objectives. This includes the ability to negotiate terms and resolve disputes related to project costs. Excellent communication and interpersonal skills to effectively liaise with project teams, contractors, vendors, and other stakeholders. The ability to convey complex cost-related information clearly and concisely, as well as collaborate with cross-functional teams, is crucial for success in this role. ERP knowledge preferably SAP functional skills are a requirement to be successful in this role. Job Experience Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus. Competencies Agility AI Fluency Build High-Performing Teams Change Management L3 Claim Studies L3 Cost Control L3 Financial Reporting L3 Leadership Provide Direction Quality Resilience Time and Task Management L3 Education Bachelor's Degree in Engineering or any related field </div>

<h2 class="h5">وصف العمل</h2> <div class="t-break" data-jb-field="description"> ملخص الوظيفة المهندس القيادي لمراقبة التكلفة مسؤول عن إدارة وتحسين نفقات المشروع طوال دورة البناء، مع التأكد من الالتزام بالقيود الميزانية، بما في ذلك الإشراف على تقدير التكاليف والتتبع وتقارير العمليات، وتحديد الانحرافات وتنفيذ إجراءات تصحيحية للحفاظ على الأهداف المالية. من خلال التحليل الدقيق والتخطيط الاستراتيجي، يهدف الدور إلى تعزيز كفاءة التكاليف ودعم التسليم في الوقت المناسب لمشروعات عالية الجودة. المسؤوليات الوظيفية 1 وضع وتنفيذ إجراءات وأنظمة مراقبة التكلفة لمراقبة نفقات المشروع وضمان الالتزام بالقيود الميزانية. التعاون مع مديري المشاريع وأصحاب المصلحة لتحديد ميزانيات المشروع وتوقعات التكلفة وخطط الإنفاق. إجراء تقدير تكلفة وتحليل تفصيلي لمكونات المشروع والمواد والعمل والنفقات العامة. تتبع وتحليل تكاليف المشروع، وتحديد الانحرافات والاتجاهات وفرص توفير التكاليف المحتملة. إعداد تقارير التكاليف العادية وعروض تقديمية لأصحاب المصلحة في المشروع، مع إبراز المؤشرات المالية الرئيسية ومؤشرات الأداء. مراجعة فواتير المقاولين والموردين، والتحقق من الدقة والالتزام بالشروط والأحكام وأسعار العقد. تقييم أوامر التغيير والتباينات لتقييم تأثيرها على تكاليف المشروع وجدول زمني، والتفاوض مع أصحاب المصلحة عند اللزوم. تنفيذ إجراءات مراقبة التكلفة للحد من المخاطر وتقليل تجاوز التكاليف، بما في ذلك الهندسة القيمية ومبادرات توفير التكاليف. تقديم الإرشاد والدعم لفِرق المشروع في المسائل المتعلقة بالتكلفة، مع تقديم توصيات لحلول واستراتيجيات فعالة من حيث التكلفة. المتابعة المستمرة لاتجاهات السوق وتقلبات الأسعار والتغيرات التنظيمية التي قد تؤثر على تكاليف المشروع، وتعديل استراتيجيات مراقبة التكلفة وفقاً لذلك. دعم تنفيذ مبادرات السلامة والصحة والبيئة، والمشاركة في أنشطة التوعية بالسلامة والمساهمة في الإبلاغ عن الحوادث وحلها بالتوافق مع سياسات الشركة ونظام IMS المسؤوليات الوظيفية 2 المسؤوليات الإضافية 3 معرفة ومهارات الوظيفة الإتقان في تقنيات التحليل المالي لتقييم تكاليف المشروع، وتحديد الاتجاهات، وتحليل الانحرافات. وهذا يشمل المعرفة بنمذجة مالية، منهجيات تقدير التكلفة، وفهم مبادئ المحاسبة. مهارات إدارة مشاريع قوية لتخطيط وتنظيم وأولويات المهام المتعلقة بأنشطة مراقبة التكاليف بشكل فعال. وهذا يشمل القدرة على التنسيق مع أصحاب مصلحة متعددين، وإدارة الجداول الزمنية، وضمان التوافق مع أهداف المشروع. الإلمام ببرامج وأدوات مراقبة التكلفة مثل بايماريفا، بروكور، أو منصات مماثلة تُستخدم لتعقب الميزانية والتوقع والتقارير. الكفاءة في استخدام جداول البيانات وبرامج قواعد البيانات لتحليل البيانات والتقارير ضرورية أيضاً. معرفة بمبادئ إدارة العقود وخبرة في مراجعة العقود وأوامر التغيير واتفاقيات الموردين لضمان الامتثال لأهداف مراقبة التكاليف. وهذا يشمل القدرة على التفاوض على الشروط وحل النزاعات المتعلقة بتكاليف المشروع. مهارات تواصل وشخصية ممتازة للتواصل الفعّال مع فرق المشروع والمقاولين والموردين وأصحاب المصلحة الآخرين. القدرة على توضيح ونقل معلومات تكلفية معقدة بوضوح واختصار، إضافة إلى التعاون مع فرق وظيفية متعددة، أمر حاسم للنجاح في هذا الدور. معرفة ERP ويفضل SAP كمهارات وظيفية مطلوبة لتنجح في هذا الدور. الخبرة الوظيفية خبرة عملية لا تقل عن 8 سنوات، خبرة عملية ذات صلة لمدة 5 سنوات، سنتان (2) GCC ميزة إضافية. الكفاءات المرونة إتقان AI بناء فرق عالية الأداء إدارة التغيير L3 دراسات المطالبة L3 مراقبة التكلفة L3 التقارير المالية L3 القيادة توفير الاتجاه الجودة المرونة إدارة الوقت والمهام L3 التعليم درجة البكالوريوس في الهندسة أو أي مجال ذي صلة </div>

Full Time Bayt

Senior Technical Engineer

On-site - Qatar - Doha 5 August 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Summary The Senior Technical Engineer performs design management of various types of projects residential commercial, warehouse/industrial buildings. Reviews the structural design of projects. Initiates value engineering exercises and identifies potential issues/constraints in design and construction during the early stages of design. Checks appropriateness of structural system and correctness of design criteria proposed by consultants. Provides direction to consultants to ensure complete submission of structural deliverables within project schedule. Performs the task of managing the documentation of the structural drawings in coordination with architectural and MEP Works. Job Responsibilities 1 Analyze and configure the basic structural components of a building or other structure for ensuring the quality of design. Review the design criteria (basic structural components, geotechnical properties, wind loads, seismic loads, loads, fire protection) and ensure adequacy of design. Analyze the structural elements to ensure the quality of the design. Analyze and reviews the loading plan and ensure compliance with codes and the project operational purpose. Determine the pressures that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes. Study the impact of the temporary works (formwork, tower cranes foundations and supports) on the structural elements, provide calculations, details and ensure compliance. Liaise with designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction of the proposed project. Provide safe structural solutions to suite the architectural and MEP requirements. Coordinates and oversees all onsite material testing, ensure that all such testing with spec and codes. Ensures weekly report detailing exact progress of all material requirements and areas of concern/delay. Ensures all shop drawings are prepared accurately followed by all as-built drawings. Close out technical submittals to be made available. Closes out material submittals to be made available and ensures that during the course of the Project, all required material submittals required for close out are prepared in advance. Leads and support teams in enhancing the competencies through facilitating effective coaching and mentoring. Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies Job Responsibilities 2 Additional Responsibilities 3 Job Knowledge & Skills Advanced proficiency in CAD software and other design tools for drafting and creating technical drawings, ensuring accuracy and adherence to design specifications. Extensive knowledge of architectural and engineering principles to effectively coordinate technical aspects of projects and resolve design challenges. Strong understanding of building codes, regulations, and industry standards to ensure compliance and quality assurance throughout the design process. Excellent communication and leadership skills to collaborate with interdisciplinary teams, oversee technical coordination efforts, and align project objectives. Problem-solving abilities to anticipate and address technical issues, optimize project outcomes, and contribute to the successful delivery of design projects. ERP knowledge preferably SAP functional skills are a requirement to be successful in this role. Job Experience Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus Competencies Resilience AI Fluency Quality Leadership Cost Management L3 Drawings/Specifications L3 QA/QC L3 Geotechnical Engineering L3 Agility HSE L3 Education Bachelor's Degree in Engineering or Civil Engineering </div>

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> ملخص الوظيفة يقوم المهندس الفني الأول بإدارة تصميم مشاريع من أنواع مختلفة: سكنية، تجارية، مبانٍ مخزنية/صناعية. يقوم بمراجعة التصميم الإنشائي للمشروعات. يبدأ بتمارين الهندسة القيمة ويحدد القضايا/القيود المحتملة في التصميم والبناء خلال المراحل المبكرة من التصميم. يتحقق من ملاءمة النظام الإنشائي وصحة معايير التصميم المقترحة من قبل الاستشاريين. يوفر توجيهات للاستشاريين لضمان تقديم جميع منتجات الإنشاءات الإنشائية ضمن جداول المشروع. يقوم بإدارة توثيق الرسومات الإنشائية بالتنسيق مع الأعمال المعمارية والكهربائية والميكانيكية والمقاولات. مسؤوليات الوظيفة 1 تحليل وتكوين المكونات الإنشائية الأساسية لبناء أو هيكل آخر لضمان جودة التصميم. مراجعة معايير التصميم (مكونات إنشائية أساسية، خصائص جيوتقنيّة، أحمال رياح، حمولات زلزاليّة، أحمال، حماية من الحريق) والتأكد من كفاية التصميم. تحليل العناصر الإنشائية لضمان جودة التصميم. تحليل ومراجعة خطة الأحمال والتأكد من الامتثال للرموز والغرض التشغيلي للمشروع. تحديد الضغوط التي ستتعرض لها كل مكوِّن، مثل العارضة أو العتلة، من أجزاء أخرى في الهيكل بسبب الاستخدام البشري أو الضغوط البيئية مثل الطقس أو الزلازل. دراسة تأثير الأعمال المؤقتة (التشكيلات، قواعد أعمدة الرافعات البرجية والدعم) على العناصر الإنشائية، توفير الحسابات والتفاصيل والتأكد من الامتثال. التنسيق مع المصممين، بما في ذلك المعماريين، للاتفاق على تصاميم آمنة وتوافقها مع المفهوم الجمالي لبناء المشروع المقترح. توفير حلول هيكلية آمنة لتلبية متطلبات المعمارية وMEP. تنسيق وإشراف جميع اختبارات المواد في الموقع، والتأكد من أن جميع الاختبارات مع المواصفات والرموز. التأكد من وجود تقرير أسبوعي يوضح تقدم جميع متطلبات المواد ومجالات القلق/التأخير. التأكد من أن جميع رسومات الورش معدة بدقة تليها رسومات as-built. إغلاق التقديمات الفنية المتاحة إغلاق تقديمات المواد لتكون متاحة ويتأكد من أنه خلال مدة المشروع، تُجهز جميع التقديمات المطلوبة للإغلاق مقدماً. يقود ويدعم الفرق في تعزيز الكفاءات من خلال التوجيه والتوجيه الفعّال. دعم تنفيذ مبادرات الصحة والسلامة والبيئة، والمشاركة في أنشطة التوعية بالسلامة والمساهمة في تقارير الحوادث وحلها وفق سياسات الشركة ونظام IMS مسؤوليات الوظيفة 2 مسؤوليات إضافية 3 المعرفة والمهارات الوظيفية إتقان متقدم لبرامج CAD وأدوات التصميم الأخرى في الرسم التقني وإنشاء الرسومات الفنية، لضمان الدقة والالتزام بمواصفات التصميم. معرفة شاملة بمبادئ الهندسة المعمارية والهندسية لتنسيق الجوانب الفنية للمشروعات بفعالية وحل تحديات التصميم. فهم قوي لقوانين البناء واللوائح والمعايير الصناعية لضمان الامتثال وضمان الجودة طوال عملية التصميم. مهارات اتصال وقيادة ممتازة للتعاون مع فرق متعددة التخصصات، والإشراف على جهود التنسيق الفني، وتوافق أهداف المشروع. قدرات حل المشكلات لتوقع القضايا الفنية ومعالجتها وتحسين نتائج المشروع والمساهمة في تقديم تصميم ناجح. معرفة ERP ويفضل SAP كمهارات وظيفية مطلوبة للنجاح في هذا الدور. خبرة العمل خبرة عملية لا تقل عن 8 سنوات، و5 سنوات خبرة عمل ذات صلة، وسنتين في GCC ميزة إضافية المهارات المرونة إتقان AI الجودة القيادة إدارة التكلفة L3 الرسومات/المواصفات L3 QA/QC L3 الهندسة الجيوتقنية L3 المرونة الإدارة الصحية والبيئية والسلامة L3 التعليم درجة البكالوريوس في الهندسة أو الهندسة المدنية </div>

Full Time Bayt

EOI Principal Piping Engineer – Offshore

On-site - Qatar - Doha 13 August 2026

Oil, Gas & Energy

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Wood is inviting expressions of interest for Principal Piping Engineer role to support future growth in our expanding business in Qatar The projects team focusing on delivering across FEED, Pre-FEED, Brownfield, Greenfield scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets. This is a long-term assignment based in Qatar. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement  We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. Responsibilities: Designing the future. Transforming the world Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in: Onshore Oil and Gas  Offshore Oil and Gas What we can offer <ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas  and emerging energy sectors </li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Life Insurance; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death </li> <li>End of Service Gratuity; In line with Qatar Labor Law, upon completion of 1 years’ service employees are eligible for an End of Service benefit of three weeks for every year of service.</li> <li>Medical Insurance: Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000.</li> <li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being.</li> <li>Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li> <li>Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li></ul>Typical responsibilities <ul> <li>Ensures Wood and Client Health, Safety, Environmental and Quality procedures are followed and that a high standard of safety is achieved in all associated work  </li> <li>Serves as the Lead Engineer and/or discipline technical authority when required on projects  </li> <li>When assigned as the lead, manages the piping scope of work within the agreed budget and timeframe, ensuring that key milestones are met for overall project delivery.  </li> <li>Supervises less experienced piping engineers and, where required, be line manager for piping engineers within the Qatar office </li> <li>Follows company standards and procedures to meet with schedule and budget as advised by the Engineering Manager </li> <li>Demonstrate appreciation of commercial and technical risks, managing these appropriately within own work and highlighting any significant issues to the Engineering Manager </li> <li>Provide piping input to tenders and project estimates in the development of method statements, deliverable lists, manhours, CTRs and risk take </li> <li>Ensures the delivery of challenging corporate, project and client targets using sound technical knowledge and decision-making skills </li> <li>Acts as Wood’s technical representative for the piping discipline in design reviews such as HAZID, HAZOP, plot plan and 3D model reviews. In this capacity also closely coordinates with clients and third parties. </li> <li>As a technical specialist, demonstrate, provide and develop appropriate technical solutions for specific piping design issues, in accordance with relevant industry or project codes and standards. </li> <li>Proactively engages and interfaces with other disciplines and third parties to ensure delivery of work scope to meet project and client expectations </li> <li>Produce, review, and take accountability for the accuracy of calculations, specifications and other piping deliverables to define the Piping and Plant Layout requirements of our projects. Such deliverables may include but are not limited to the following: </li> <li>Piping design basis, piping line list, interface schedule, valve list, special items list, support schedule, wall thickness calculations, stress analysis report, etc.  </li> <li>Preparation and development of enquiry packages including Specifications, Datasheets, Request for Quotation and Technical Bid Evaluation relating to piping materials.    </li> <li>Coordinate closely with Process and Material SMEs for selection and development of piping material specifications. </li> <li>Provide direction and guidance to designers in production of the 3D model and piping drawings such as plot plans, line shoots, general arrangement drawings, isometrics, tie-in details, etc. </li> <li>Reviewing, checking and approving of the piping deliverables to ensure accuracy and alignment with the scope of work prior to issue </li> <li>Work closely with other disciplines, coordinating all input for the plant layout and 3D model. </li> <li>Manages the closeout of actions and clash, taking a leading role in the resolution of discipline interface issues.  </li> <li>Collaborate with other disciplines in the resolution of pipe stress and equipment connection issues. </li> <li>Provide timely support and input in the completion of other discipline deliverables.  </li> <li>Review and approve material take off for the Piping discipline </li> <li>Complete technical reviews and audits within the Piping discipline for projects of varying complexity  </li> <li>Complete site surveys and data gathering activities for brownfield scopes of work </li> <li>Remain up to date with the latest technical developments in fields of expertise </li> <li>Takes a proactive approach to personal & professional development </li> <li>Seeks and supports opportunities for department and project improvement, contributing to the development of solutions  </li> <li>Support recruitment, training and development of piping personnel</li></ul> Qualifications: What makes you remarkable?  At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.  Experience <ul> <li>Engineering Degree in Mechanical Engineering or similar with a minimum of 15 years of relevant experience </li> <li>It is preferable for the candidate to be enrolled on the Register of Engineers in the State of Qatar, Grade A Category or have a Chartered Engineer membership </li> <li>Proven experience in key piping competencies, including Piping Design/Routing, Plant Layout, Stress Analysis and Piping Materials for the Oil & Gas sector.  </li> <li>Skilled with the development of plant layout in both onshore and offshore environments, having a detailed understanding of design fundamentals and criteria relating to process flow, safety spacing, access/egress, operations and maintenance.   </li> <li>Experienced in the design and selection of pipe supports and equipment connections for both onshore and offshore facilities.  </li> <li>Familiar with Piping 2D and 3D design tools such as Hexagon SP3D, Aveva E3D, Bentley AutoPlant, AutoCAD, Microstation, etc.  </li> <li>Familiar with piping stress analysis tools such as Caesar II, capable of representing the company in piping stress and pipe support design.  </li> <li>Must be highly experienced with plot plan and 3D model reviews, ideally having facilitated such reviews for both onshore and offshore facilities.  </li> <li>Familiar with Flow and Acoustic induced vibration studies, along with the impact to piping design.  </li> <li>Experienced with other design reviews such as HAZID and HAZOP, capable of representing the discipline as the technical authority in these studies.  </li> <li>Experienced with different technologies and techniques for tie-ins is desirable, hot and cold tapping techniques for example.  </li> <li>Experienced with management of vendors, able to complete Technical Bid Evaluations and oversee development of vendor scope </li> <li>Construction and site experience is desirable, with exposure to the management and resolution of pipe and pipe support issues.  </li> <li>Familiar with and experience in the application of international design codes and standards such as BS, API, ASME B31.3 and B31.8 </li> <li>Ideally has experience with Qatar O&G customer design standards including Shell DEPs  </li> <li>A self-motivated, proactive individual with high achievement drive and initiative, excellent verbal and written communication skills and good organisational awareness </li> <li>Ability to impact and influence fellow workers </li> <li>Display analytical and innovation skills to manage new technology </li></ul> </div>

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> تدعو وود إلى التعبير عن الاهتمام لدور مهندس الأنابيب الرئيسي لدعم النمو المستقبلي في أعمالنا المتنامية في قطر يركز فريق المشاريع على التنفيذ عبر FEED، Pre-FEED، النطاقات Brownfield وGreenfield. في هذا الدور، ستكون مسؤولاً عن تنفيذ أعمال المشروع وفقاً لخطة تنفيذ المشروع، بما في ذلك إجراءات Wood أو إجراءات المشروع الخاصة بالسلامة والجودة ضمن أهداف الوقت والالتزامات والتكاليف والجدول الزمني للمشروع. هذه مهمة طويلة الأجل مقرها في قطر. Wood هي رائدة عالمياً في الاستشارات والهندسة والعمليات لقطاعات الطاقة والمواد. مع 33,000 موظف في نحو 50 دولة، تدعم Wood العملاء عبر دورة حياة الأصل كاملة، وتقدم نتائج آمنة ومتوقعة مع تمكين عمليات مرنة ومستقبل منخفض الكربون. Wood تشكل ركيزة الطاقة والمواد في Sidara - شراكة عالمية توحد شركات الهندسة والتصميم وإدارة المشاريع متعددة التخصصات الرائدة. www.woodgroup.com بيان التنوع نحن صاحب عمل يتيح فرص متكافئة يعترف بقيمة القوة العاملة المتنوعة. ستُنظر جميع الطلبات المؤهلة لاستحقاق العمل بناءً على معايير موضوعية ودون اعتبار لما يلي (وهو ليس قائمة حصرية): العرق، اللون، العمر، الدين، النوع، الأصل الوطني، الإعاقة، التوجه الجنسي، هوية الجنس، وضع المحارب المحمي، أو غيرها من السمات وفقاً للقوانين المعمول بها. المسؤوليات: تصميم المستقبل. تحويل العالم تُعير الشركة اهتماماً لسوق العمل للمكتب في الفرص سواء Brownfield أم Greenfield، وتُطلب كوادر متعددة المهارات، وخصوصاً ذوو الخبرة في: النفط والغاز على اليابسة النفط والغاز البحري ما الذي يمكن أن نقدمه <ul> <li>مشروعات ذات مغزى ومثيرة تُسلم لقادة الصناعة عبر النفط والغاز وقطاعات الطاقة الناشئة</li> <li>التزام بالتنوع والشمول؛ نحن منظمة ملتزمة بالتنوع والشمول عبر أعمالنا مع شبكات موظفين تتيح لجميع الموظفين صوتاً</li> <li>راتب تنافسي مع مراجعات راتب منتظمة لضمان المكافأة بالمستوى الصحيح بما يتماشى مع السوق</li> <li>تأمين الحياة; يوفر دفـع راتب أساسي مضاعف بواقع 2 حتى الحد الأقصى 1 مليون ريال قطري عند الوفاة</li> <li>علاوة نهاية الخدمة; وفقاً لقانون العمل القطري، عند انتهاء الخدمة لمدة سنة واحدة، يحق للموظفين الحصول على مكافأة نهاية الخدمة تعادل ثلاث أسابيع من الراتب عن كل سنة خدمة.</li> <li>تأمين طبي: يغطي حتى 250,000 ريال قطري للفرد سنوياً في حال احتجت للعلاج. المغطى مسبقاً أو الحالات المزمنة مغطاة حتى 10,000 ريال قطري.</li> <li>برنامج مساعدة الموظف: يتيح لك الشعور بالراحة مع إمكانية مناقشة أي قضايا عمل أو شخصية بشكل سري مع أفراد عائلتك المباشرين عند الحاجة. يدعم البرنامج رفاهيتك العقلية والجسدية والاجتماعية والمالية.</li> <li>عضويات مهنية: اشتراك مهني واحد، تسجيل، اشتراك، شهادة وتراخيص سنوياً لجميع موظفي Wood النشطين. يجب أن تكون العضوية ذات صلة بالدور الذي تشغله حالياً أو جزءاً من خطة تطوير. يجب المطالبة بالتعويض من خلال نظام إجراءات المصروفات، مع وجود دليل داعم.</li> <li>اتصالات عالمية: انضم إلى خبراء حول العالم في طليعة صناعتنا، يصوغون معايير مهنتنا</li></ul>المسؤوليات النموذجية <ul> <li>التأكد من اتباع إجراءات الصحة والسلامة والبيئة والجودة الخاصة بـ Wood والعملاء وأن يتم تحقيق معيار عالي من السلامة في جميع الأعمال المرتبطة</li> <li>يعمل كمهندس رئيسي و/أو سلطة فنية في التخصص عند الحاجة في المشاريع</li> <li>عند تعيينه كقائد، يدير نطاق عمل الأنابيب ضمن الميزانية والجدول المتفقين، مع ضمان الالتزام بالمعالم الرئيسية لتسليم المشروع ككل</li> <li>يشرف على مهندسي الأنابيب الأقل خبرة، وعند الحاجة، يكون مديراً مباشراً لمهندسي الأنابيب في مكتب قطر</li> <li>يتبع معايير وإجراءات الشركة للالتزام بالجدول والميزانية كما ينصح به مدير الهندسة</li> <li>يظهر تقديراً للمخاطر التجارية والفنية، ويديرها بشكل ملائم داخل عمله ويبرز أي قضايا كبيرة لمدير الهندسة</li> <li>يقدم مدخلات أنابيب للمناقصات وتقديرات المشروع في تطوير بيانات الطريقة، قوائم التسليم، ساعات العمل، CTRs والمخاطر المحتملة</li> <li>يضمن تحقيق أهداف شرطة الشركة والمشروع والعملاء باستخدام معرفة تقنية سليمة ومهارات اتخاذ القرار</li> <li>يعمل ممثلاً تقنياً لـ Wood لتخصص الأنابيب في مراجعات التصميم مثل HAZID وHAZOP وخطط التخطيط ومراجعات نموذج 3D. وفي هذا الدور ينسق أيضاً عن كثب مع العملاء والأطراف الثالثة.</li> <li>كمتخصص تقني، يعرض ويوفر ويطور حلولاً تقنية مناسبة لمسائل تصميم الأنابيب المحددة، وفقاً لمعايير والكودات الصناعية والمشروعات المعنية</li> <li>يتفاعل بنشاط مع تخصصات أخرى وأطراف ثالثة لضمان تسليم نطاق العمل وفق توقعات المشروع والعميل</li> <li>إنتاج ومراجعة وتحمل مسؤولية دقة الحسابات والمواصفات وغيرها من عناصر أنابيب لتحديد متطلبات تخطيط الأنابيب والمصانع في مشاريعنا. قد تشمل هذه العناصر على سبيل المثال لا الحصر:</li> <li>أسس تصميم الأنابيب، قائمة خطوط الأنابيب، جدول واجهات، قائمة الصمامات، قائمة العناصر الخاصة، جدول الدعم، حسابات سمك الجدار، تقرير الإجهاد</li> <li>إعداد وتطوير حزم الاستفسار بما فيها المواصفات، datasheets، طلب عروض الأسعار وتقييم العروض الفنية المتعلقة بمواد الأنابيب</li> <li>التنسيق عن كثب مع خبراء العمليات والمواد لاختيار وتطوير مواصفات مواد الأنابيب</li> <li>توفير التوجيه والإرشاد للمصممين لإنتاج نموذج 3D ورسومات الأنابيب مثل مخططات التخطيط، لقطات الخط، الرسومات العامة، الأيزوميتريكات، تفاصيل الربط، إلخ</li> <li>مراجعة وفحص واعتماد deliverables الأنابيب لضمان الدقة والتوافق مع نطاق العمل قبل الإصدار</li> <li>العمل عن كثب مع تخصصات أخرى، مع تنسيق جميع المدخلات لتخطيط المرافق ونموذج 3D</li> <li>إدارة إغلاق الإجراءات والتصادم، وتولي دوراً رائداً في حل قضايا واجهة التخصص</li> <li>التعاون مع تخصصات أخرى في حل مشكلات الإجهاد للأنابيب وربط المعدات</li> <li>تقديم دعم ومساهمة في إكمال deliverables تخص تخصصات أخرى في الوقت المناسب</li> <li>مراجعة واعتماد استخراج المواد لتخصص الأنابيب</li> <li>إكمال المراجعات الفنية والتدقيق ضمن تخصص الأنابيب لمشروعات بتعقيدات مختلفة</li> <li>إجراء مسوحات المواقع وجمع البيانات لنطاقات Brownfield</li> <li>مواكبة أحدث التطورات التقنية في مجالات الخبرة</li> <li>اتباع نهج استباقي نحو التطوير الشخصي والمهني</li> <li>البحث عن فرص لتحسين القسم والمشروع والمساهمة في تطوير الحلول</li> <li>دعم التوظيف والتدريب وتطوير كوادر الأنابيب</li></ul> المؤهلات: ما الذي يجعلك مميزاً؟ في Wood، نلتزم بتكافؤ الفرص ونرحب بجميع الأفراد الموهوبين للانضمام إلى فريقنا. لذا حتى إذا لم تتطابق مع كل العبارة أدناه لكن تشعر أن لديك برخی الخبرة والمعرفة أو المهارات اللازمة لهذا الدور، فنحن نشجعك على التقديم. سيستلزم الأمر من جميعنا العمل معاً لتقديم حلول لأهم التحديات في العالم. الخبرة <ul> <li>درجة هندسية في الهندسة الميكانيكية أو ما يماثلها بحد أدنى 15 عامًا من الخبرة ذات الصلة</li> <li>من المفضل أن يكون المرشح مسجلاً لدى سجل المهندسين في دولة قطر، الدرجة A فئة أو أن يكون لديه عضوية مهندس معتمد</li> <li>خبرة مثبتة في كفاءات الأنابيب الأساسية، بما في ذلك تصميم/توجيه الأنابيب، تخطيط المصنع، تحليل الإجهاد واختيار مواد الأنابيب لقطاع النفط والغاز</li> <li>مهارة في تطوير تخطيط المصنع في كل من البيئات البرية والبحرية مع فهم تفصيلي لأسس التصميم والمعايير المتعلقة بتدفق العمليات، المسافات الآمنة، الوصول/الخروج، العمليات والصيانة</li> <li>خبرة في تصميم واختيارSupports للأنابيب ومقابلات المعدات للمرافق البرية والبحرية</li> <li>مألوف باستخدام أدوات تصميم أنابيب ثنائية وثلاثية الأبعاد مثل Hexagon SP3D، Aveva E3D، Bentley AutoPlant، AutoCAD، Microstation، وغيرها</li> <li>مألوف باستخدام أدوات تحليل الإجهاد للأنابيب مثل Caesar II، قادراً على تمثيل الشركة في تحليل الإجهاد وربط الأنابيب</li> <li>يجب أن يكون ذو خبرة عالية في مراجعات مخطط التخطيط ونموذج 3D، ويفضل أن يكون قد سهّل مثل هذه المراجعات للمرافق البرية والبحرية</li> <li>مألوف بالدراسات التدفق والاهتزاز الناتج عن الصوتيات، إلى جانب التأثير على تصميم الأنابيب</li> <li>خبرة في مراجعات تصميم أخرى مثل HAZID وHAZOP، قادر على تمثيل التخصص كسلطة تقنية في هذه الدراسات</li> <li>خبرة مع تقنيات وتكنولوجيات مختلفة لربط الأنابيب، مرغوب مثل تقنيات الربط الساخن والبارد</li> <li>خبرة في إدارة الموردين، قادر على إكمال تقييمات العروض الفنية ومتابعة تطوير نطاق المورد</li> <li>يفضل وجود خبرة في البناء والموقع، مع تعرض لإدارة وحل مشكلات أنابيب ودعمها</li> <li>مألوف مع وتطبيق المعايير الدولية للكودات والتصاميم مثل BS، API، ASME B31.3 وB31.8</li> <li>من الأفضل أن لديه خبرة مع معايير تصميم عملاء O&G في قطر بما في ذلك Shell DEPs</li> <li>شخص ذو دافع ذاتي، مبادر، لديه دافع عالية للإنجاز ومبادرة، مهارات تواصل شفوية وكتابية ممتازة، ووعي تنظيمي جيد</li> <li>القدرة على التأثير والتأثير على الزملاء</li> <li>إظهار مهارات تحليلية وابتكارية لإدارة التكنولوجيا الجديدة</li></ul>

Full Time LinkedIn

Java Software Engineer

On-site - Qatar - Doha 25 September 2026

Other

Job Type Full Time Job Reference # 335877BR City Doha Key Responsibilities Are you passionate about building and delivering robust and scalable IT solutions? Are you experienced in building brand new and maintaining existing software products? Are you confident at iteratively refining user requirements and removing any ambiguity? We are looking for a Software Engineer to: <ul><li> design and develop new and maintain existing software products using modern technologies and agile methodologies</li><li> have a proactive and solution driven attitude to help deliver time sensitive project deliveries</li><li> apply modern software development practices to ensure consistent state-of-the-art design and implementation of the software product</li><li> ensure the delivery of high-quality, secure, scalable, and robust software products that seamlessly integrate into the enterprise-wide ecosystem and access channels.</li><li> analyze business requirements, design and implement solutions, and develop software components to incrementally enhance the product</li><li> support the product in resolving high-priority defects and deploying fixes to production systems</li><li> closely collaborate within an agile team and a global agile organization </li></ul>The team In our agile operating model, teams—known as crews—are organized around major products and services within broader Streams, each designed to meet specific client needs. Our Stream, "Save, Protect, and Grow My Investments," reimagines investing for the digital age and connects clients with a wide range of investment opportunities. You’ll join the Advisory crew, which delivers essential solutions to support UBS’s global Advisory businesses. Our work includes providing instrument data, performing health checks and calculations, optimizing portfolios, and developing innovative Advisory tools. As part of our development team, you will help design, build, and continuously enhance the Global Risk Analytics & Calculation Engine (GRACE) for Advisory portfolios Your Skills And Experience <ul><li> minimum 5+ years hands-on application development experience using Java and Spring preferably in the finance sector</li><li> Bachelor’s/master’s degree or equivalent with a focus in software engineering</li><li> Proficient in Java 25 and Spring Boot 3.5 for backend development, including REST API and batch processing</li><li> Experience with Angular 20 for modern frontend applications is a plus</li><li> Familiarity with containerization (Docker) and deploying applications on Azure Kubernetes Service (AKS)</li><li> Familiarity with Azure PostgreSQL and relational database management</li><li> Understanding of GitLab CI/CD pipelines, cloud infrastructure, and API security best practices</li><li> you are curious to explore how AI can improve how we build, deliver, and optimize workflows. You do this with sound judgment – validating outputs and aligning with policies, risk standards, and ethical use. </li></ul>About Us UBS is a leading and truly global wealth manager and the leading universal bank in Switzerland. We also provide diversified asset management solutions and focused investment banking capabilities. Headquartered in Zurich, Switzerland, UBS is present in more than 50 markets around the globe. We know that great work is never done alone. That’s why we place collaboration at the heart of everything we do. Because together, we’re more than ourselves. Want to find out more? Visit ubs.com/careers. Join us At UBS, we know that it's our people, with their diverse skills, experiences and backgrounds, who drive our ongoing success. We’re dedicated to our craft and passionate about putting our people first, with new challenges, a supportive team, opportunities to grow and flexible working options when possible. Our inclusive culture brings out the best in our employees, wherever they are on their career journey. And we use artificial intelligence (AI) to work smarter and more efficiently. We also recognize that great work is never done alone. That’s why collaboration is at the heart of everything we do. Because together, we’re more than ourselves. We’re committed to disability inclusion and if you need reasonable accommodation/adjustments throughout our recruitment process, you can always contact us. Contact Details UBS Business Solutions SA UBS Recruiting Disclaimer / Policy statements UBS is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce.

نوع الوظيفة دوام كامل الرقم المرجعي للوظيفة# 335877BR المدينة الدوحة المسؤوليات الرئيسية هل أنت شغوف ببناء وتقديم حلول تكنولوجيا معلومات قوية وقابلة للتوسع؟ هل لديك خبرة في بناء منتجات برمجية جديدة تماماً وصيانة المنتجات الحالية؟ هل تملك الثقة في تحسين متطلبات المستخدم بشكل تكراري وإزالة أي غموض؟ نحن نبحث عن مهندس برمجيات لـ: <ul><li>تصميم وتطوير منتجات برمجية جديدة وصيانة المنتجات الحالية باستخدام التقنيات الحديثة ومنهجيات أجايل (Agile)</li><li>التحلي بأسلوب استباقي وموجه نحو الحلول للمساعدة في تسليم المشاريع المرتبطة بمواعيد نهائية حساسة</li><li>تطبيق الممارسات الحديثة لتطوير البرمجيات لضمان تصميم وتنفيذ أحدث المنتجات البرمجية بشكل متسق</li><li>ضمان تقديم منتجات برمجية عالية الجودة وأمنة وقابلة للتوسع وقوية تتكامل بسلاسة مع منظومة الشركة وقنوات الوصول الشاملة.</li><li>تحليل متطلبات العمل، وتصميم وتنفيذ الحلول، وتطوير المكونات البرمجية لتحسين المنتج بشكل تدريجي</li><li>دعم المنتج في حل العيوب ذات الأولوية العالية ونشر الإصلاحات على أنظمة الإنتاج</li><li>التعاون وثيق الصلة ضمن فريق أجايل ومؤسسة أجايل عالمية </li></ul>الفريق في نموذج التشغيل الخاص بنا القائم على منهجية أجايل، يتم تنظيم الفرق—المعروفة باسم الطواقم (crews)—حول المنتجات والخدمات الرئيسية ضمن مسارات (Streams) أوسع، حيث جرى تصميم كل منها لتلبية احتياجات محددة للعملاء. يعيد مسارنا، "الادخار والحماية ونمو استثماراتي"، تصور الاستثمار للعصر الرقمي ويربط العملاء بمجموعة واسعة من الفرص الاستثمارية. ستنضم إلى فريق الاستشارات (Advisory crew)، الذي يقدم حلولاً أساسية لدعم أعمال الاستشارات العالمية لشركة UBS. يتضمن عملنا توفير بيانات الأدوات المالية، وإجراء فحص الجودة والحسابات، وتحسين المحافظ الاستثمارية، وتطوير أدوات استشارية مبتكرة. كجزء من فريق التطوير لدينا، ستساعد في تصميم وبناء وتحسين محرك تحليلات وحساب المخاطر العالمي (GRACE) للمحافظ الاستشارية باستمرار مهاراتك وخبرتك <ul><li>خبرة عملية لا تقل عن 5 سنوات في تطوير التطبيقات باستخدام Java وSpring، ويفضل أن تكون في القطاع المالي</li><li>درجة البكالوريوس/الماجستير أو ما يعادلها مع التركيز على هندسة البرمجيات</li><li>إتقان Java 25 وSpring Boot 3.5 لتطوير الخلفيات البرمجية (backend)، بما في ذلك REST API والمعالجة الدفعية (batch processing)</li><li>تعتبر الخبرة في Angular 20 لتطبيقات الواجهة الأمامية الحديثة ميزة إضافية</li><li>الإلمام بتقنية الحاويات (Docker) ونشر التطبيقات على خدمة Azure Kubernetes (AKS)</li><li>الإلمام بـ Azure PostgreSQL وإدارة قواعد البيانات العلاقاتية</li><li>فهم خطوط أنابيب GitLab CI/CD، والبنية التحتية السحابية، وأفضل ممارسات أمان API</li><li>لديك الفضول لاستكشاف كيف يمكن للذكاء الاصطناعي تحسين طريقة بنائنا وتقديمنا وتحسيننا لسير العمل. وتقوم بذلك بحكم ناضج – من خلال التحقق من المخرجات والتوافق مع السياسات ومعايير المخاطر والاستخدام الأخلاقي. </li></ul>نبذة عنا تعد UBS شركة عالمية رائدة في إدارة الثروات والبنك الشامل الرائد في سويسرا. كما نقدم حلولاً متنوعة لإدارة الأصول وإمكانيات مركزة في الخدمات المصرفية الاستثمارية. يقع المقر الرئيسي لشركة UBS في زيورخ، سويسرا، وتتواجد في أكثر من 50 سوقاً حول العالم. نحن نعلم أن العمل العظيم لا يتم بمفردك أبداً. لهذا السبب نضع التعاون في قلب كل ما نقوم به. لأننا معاً نصبح أكثر قدرة. هل تريد معرفة المزيد؟ تفضل بزيارة ubs.com/careers. انضم إلينا في UBS، نعلم أن موظفينا، بمهاراتهم وخبراتهم وخلفياتهم المتنوعة، هم من يقودون نجاحنا المستمر. نحن مخلصون لعملنا وشغوفون بوضع موظفينا في المقام الأول، مع التحديات الجديدة، والفريق الداعم، وفرص النمو، وخيارات العمل المرنة عندما يكون ذلك ممكناً. تُبرز ثقافتنا الشاملة أفضل ما في موظفينا، أينما كانوا في رحلتهم المهنية. ونحن نستخدم الذكاء الاصطناعي (AI) للعمل بشكل أكثر ذكاءً وكفاءة. كما ندرك أيضاً أن العمل العظيم لا يتم بمفردك أبداً. لهذا السبب فإن التعاون هو جوهر كل ما نقوم به. لأننا معاً نصبح أكثر قدرة. نحن ملتزمون بشمول الأشخاص ذوي الإعاقة، وإذا كنت بحاجة إلى تسهيلات/تعديلات معقولة خلال عملية التوظيف لدينا، يمكنك دائماً الاتصال بنا. تفاصيل الاتصال UBS Business Solutions SA UBS Recruiting إخلاء المسؤولية / بيانات السياسة UBS هي صاحب عمل يقدم تكافؤ الفرص. نحن نحترم ونسعى لتمكين كل فرد وندعم الثقافات ووجهات النظر والمهارات والخبرات المتنوعة داخل القوى العاملة لدينا.

Full Time LinkedIn

Licensed Aircraft Engineer - Heavy Maintenance B1

On-site - Qatar - Doha 7 September 2026

Aviation & Maritime

About the Role Qatar Airways are pleased to announce an incredibly exciting opportunity to join our Technical Engineering team as a Licensed Aircraft Engineer Level 1 who is responsible to deliver aircraft Maintenance activities to directly support flight operations maintenance checks and duties within their authority as a Licensed Aircraft Engineer. To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation. Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways procedures. Reviews work procedures, standards and proposes improvements where procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished by the Mechanics. Ensure tasks are performed to meet company/Customer standard and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his range of his authority, and ensure that aircrafts or components serviceability standards are maintained to meet schedule requirements. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. When supervising the wok of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task. About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best. Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. As per company requirement, must arrange to have equipment, heavy vehicle driving license to facilitate Maintenance task requirements. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members. Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before. How to apply:If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application. Together, everything is possible

نبذة عن الدور يسر الخطوط الجوية القطرية الإعلان عن فرصة مثيرة للغاية للانضمام إلى فريقنا للهندسة الفنية كمهندس طائرات مرخص من المستوى 1، والذي سيكون مسؤولاً عن تنفيذ أنشطة صيانة الطائرات لدعم عمليات صيانة الطيران وفحوصات الطيران والمهام ضمن نطاق صلاحياته كمهندس طائرات مرخص. كما يتطلب الدور تقديم المعرفة والمهارات والخبرات المتخصصة لضمان التشغيل الآمن والفعال والمثمر. الخطة التشغيلية: تنفيذ الأنشطة الموكلة بطريقة فعالة ومثمرة، وتشغيل المعدات أو استخدام الأدوات المتعلقة بالمهام الموكلة ضمن إطار إجراءات الخطوط الجوية القطرية. مراجعة إجراءات العمل والمعايير واقتراح التحسينات في الحالات التي لا تكون فيها الإجراءات مناسبة لضمان فعالية عمليات العمل. المسؤولية عن الإفراج النهائي عن العمل المنجز من قبل الميكانيكيين. التأكد من تنفيذ المهام لتلبية معايير الشركة/العملاء والأهداف مثل موثوقية الإقلاع ومستوى العيوب المؤجلة المقبولة. ضمان تلبية معايير تسليم منتجات الخطوط الجوية القطرية/العملاء. إنجاز مهام صيانة الطائرات وفقاً للسياسات والإجراءات المحددة. توفير دعم مرضٍ للعملاء الداخليين والخارجيين. تنفيذ حلول للمشكلات الفنية ضمن نطاق صلاحياته، والتأكد من الحفاظ على معايير صلاحية الطائرات أو المكونات للخدمة لتلبية متطلبات الجدول الزمني. تقديم التوجيه و/أو التدريب أثناء العمل للفنيين وميكانيكيي الطائرات الذين يرفعون تقاريرهم لهذا المنصب. عند الإشراف على عمل الآخرين، يجب ضمان الحفاظ على مستوى مقبول من الحرفية والجودة واستخدام الأدوات الصحيحة لإنجاز المهمة. نبذة عن مجموعة الخطوط الجوية القطرية: بدأت قصتنا بأربع طائرات. واليوم، نقدم التميز عبر 12 شركة مختلفة تجتمع معاً ككيان واحد. لقد نمونا بسرعة، وحطمنا الأرقام القياسية، ووضعنا اتجاهات يتبعها الآخرون. نحن لا نتباطأ بسبب الخوف من الفشل. بدلاً من ذلك، نجرؤ على تحقيق ما لم يتم القيام به من قبل. لذا، سواء كنت تبتكر تجربة فريدة لعملائنا أو تبدع خلف الكواليس، فإن كل شخص يساهم في قصتنا التي نفخر بها. قصة نمو وإصرار مذهل. حان الوقت الآن لتقديم أفضل ما لديك. المؤهلات عنك: مؤهل مدرسي ثانوي / مؤهل مهني / دبلوم أو ما يعادله (نوع الدبلوم يعتمد على الدور) مع خبرة لا تقل عن 5 سنوات في مجال العمل، أو درجة البكالوريوس أو ما يعادلها مع خبرة لا تقل عن 4 سنوات في مجال العمل. من الضروري الحصول على دبلوم في صيانة الطائرات أو مؤهل مهني في صيانة الطائرات أو درجة علمية (هندسة، بكالوريوس علوم) أو ما يعادلها في هندسة الطائرات. يجب أن يحمل ما لا يقل عن رخصة إيكاو/الهيئة العامة للطيران المدني (QCAA) كاملة لأسطول الخطوط الجوية القطرية الرئيسي والموافقات اللازمة. وفقاً لمتطلبات الشركة، يجب الترتيب للحصول على رخصة قيادة معدات أو مركبات ثقيلة لتسهيل متطلبات مهام الصيانة. تحديد نوع الأدوات والمعدات اللازمة لإنجاز العمل. استخدام الرياضيات لحل المشكلات. التحكم في عمليات المعدات أو الأنظمة. المهارات الإدارية - القدرة على تفويض العمل وتحديد اتجاه واضح وإدارة سير العمل. مهارات قوية في التوجيه والتدريب. القدرة على تدريب وتطوير مهارات المرؤوسين. القدرة على تعزيز العمل الجماعي بين أعضاء الفريق. كن جزءاً من قصة استثنائية: مهاراتك. خيالك. طموحك. هنا، لا توجد حدود لإمكاناتك وللتأثير الذي يمكنك إحداثه. ستجد فرصاً لا حصر لها للنمو والعمل على أكبر التحديات وأكثرها مكافأة والتي ستبني مهاراتك وخبراتك. لديك الفرصة لتكون جزءاً من مستقبلنا، وبناء الحياة التي تريدها بينما تكون جزءاً من مجتمع دولي. أفضل ما لدينا هنا وما زال في الطريق. بالنسبة لنا، المستحيل هو مجرد تحدٍ. انضم إلينا ونحن نجرؤ على تحقيق ما لم يتم القيام به من قبل. كيفية التقديم: إذا كان لديك ما يلزم لتكون جزءاً من فريقنا الحائز على تصنيف 5 نجوم، يرجى اتخاذ الخطوة الأولى والتقديم الآن عن طريق تحميل سيرتك الذاتية وإكمال الطلب عبر الإنترنت. معاً، كل شيء ممكن

Full Time Bayt

Senior Python Data Scraping Engineer (Freelance)

Remote - Qatar - Doha 16 August 2026

Information Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Mindrift is looking for highly skilled Vibecode specialists to join the Tendem project (https://tendem. ai/) and drive specialized data scraping workflows for real-world use cases. Mindrift is looking for highly skilled Senior Python Data Scraping Engineers to join the Tendem project and drive specialized data scraping workflows for real-world applications. In this role, you'll apply your expertise in web scraping, data extraction, and data processing to deliver accurate, reliable, and high-quality results. This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing. What We Do The Mindrift platform connects specialists with innovative technology projects. Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts. About the Role This is a freelance role for a Tendem project. As a Senior Python Data Scraping Engineer , you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing tools such as Apify, OpenRouter, and other technologies, alongside your own technical expertise and approaches. Key Responsibilities Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets. Leverage available tools and custom workflows to accelerate data collection, validation, and task execution while meeting defined requirement. Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior. Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery. Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes. Educational qualifications At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required). Bachelor’s or Master’s Degree in Engineering, Applied Mathematics, Computer Science, or related technical fields is a plus. Academic and/or Professional Experience Candidates should have a strong technical foundation and practical experience with scripting, automation, and data extraction workflows. We are looking for specialists who can solve non-trivial problems, work confidently with modern development tools and technologies, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential. Technical Skills (Essential) Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML) Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets) Additional requirements Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks Strong attention to detail and commitment to data accuracy Self-directed work ethic with ability to troubleshoot independently A link to GitHub is a plus English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active. Compensation On this project, contributors can earn up to $37 per hour equivalent , depending on their level and pace of contribution. Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements. </div>

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> تبحث Mindrift عن متخصصين متمرسين في Vibecode للانضمام إلى مشروع Tendem (https://tendem. ai/) ودفع سير عمل استخراج البيانات المتخصصة لحالات الاستخدام الواقعية. تبحث Mindrift عن مهندسين كبار في بايثون لاستخراج البيانات للانضمام إلى مشروع Tendem ودفع سير عمل استخراج البيانات المتخصصة لتطبيقات العالم الواقعي. في هذه الوظيفة، ستطبق خبرتك في استخراج البيانات من الويب، واستخراج البيانات، ومعالجة البيانات لتقديم نتائج دقيقة وموثوقة وعالية الجودة. هذه الفرصة عن بُعد بدوام جزئي مثالية للمحترفين التقنيين الذين لديهم خبرة عملية في استخراج البيانات من الويب، واستخراج البيانات ومعالجتها. ما الذي نفعله؟ تربط منصة Mindrift المتخصصين بمشروعات تكنولوجيا مبتكرة. مهمتنا هي المساعدة في تطوير تكنولوجيا ذكاء اصطناعي عالية الجودة من خلال دمج الخبرة الواقعية من المحترفين حول العالم مع جهود تطوير ذكاء اصطناعي متقدمة. عن الدور هذا دور مستقل حر لمشروع Tendem. كمهندس كبار في بايثون لاستخراج البيانات، ستتعامل مع مهام استخراج البيانات التي تتطلب دقة تقنية في الاستخراج والمعالجة على الويب، باستخدام أدوات مثل Apify وOpenRouter وتقنيات أخرى، إلى جانب خبرتك التقنية ومناهجك الخاصة. المسؤوليات الرئيسية: إدارة سير عمل استخراج البيانات من البداية للنهاية عبر مواقع معقدة، ضمان التغطية الكاملة والدقة والتسليم الموثوق لمجموعات البيانات المنظمة. استغلال الأدوات المتاحة ومسارات العمل المخصصة لتسريع جمع البيانات والتحقق منها وتنفيذ المهام مع تلبية المتطلبات المحددة. ضمان استخراج موثوق من مصادر ويب ديناميكية وتفاعلية، وتكييف الأساليب حسب الحاجة للتعامل مع المحتوى المعروض بجافا سكريبت وسلوك الموقع المتغير. فرض معايير جودة البيانات من خلال فحوصات التحقق، وضوابط التناسق عبر المصادر، والالتزام بمواصفات التنسيق، والتحقق النظامي قبل التسليم. توسيع عمليات الاستخراج للبيانات الكبيرة باستخدام دفعات فعالة أو توازي، ورصد الأعطال، والحفاظ على الاستقرار أمام تغيّر بسيط في بنية الموقع. المؤهلات التعليمية: خبرة 5 سنوات على الأقل ذات صلة في هندسة البيانات، استخراج البيانات من الويب، التشغيل الآلي، أو تطوير البرمجيات (مطلوب). درجة البكالوريوس أو الماجستير في الهندسة، الرياضيات التطبيقية، علوم الحاسوب، أو المجالات التقنية ذات الصلة ميزة إضافية. الخبرة الأكاديمية و/أو المهنية: يجب أن يمتلك المرشحون أساساً تقنياً قوياً وتجربة عملية مع التهيئة والبرمجة الآلية وتدفقات استخراج البيانات. نحن نبحث عن متخصصين يمكنهم حل مشكلات غير تقليدية والتعامل بثقة مع أدوات وتكنولوجيات التطوير الحديثة وجمع وتنظيم والتحقق من البيانات من مصادر متنوعة بطريقة منهجية. نهج منهجي وتركّيز على التفاصيل والقدرة على العمل بشكل مستقل أمور أساسية. المهارات التقنية (أساسية): خبرة قوية في استخراج البيانات عبر بايثون (BeautifulSoup، Selenium أو ما يماثلها)، بما في ذلك المحتوى الديناميكي (JS، AJAX، التمرير اللانهائي) وواجهات برمجة التطبيقات عبر الوكاء؛ قدرة مثبتة على استخراج البيانات من هياكل معقدة (هرميات، صفحات محفوظة، HTML غير متسق)؛ خلفية صلبة في تنظيف البيانات، التطبيع، والتحقق، وتقديم مجموعات بيانات منظمة (CSV، JSON، جداول Google)؛ متطلبات إضافية: خبرة مثبتة في التعامل مع آليات مكافحة الروبوت وبُنى المواقع الديناميكية على نطاق واسع؛ خبرة مع بنى تحتية سحابية (AWS أو ما يعادلها) وتعبئة حاويات (Docker) كجزء من سير العمل الفعلي؛ خبرة عملية مع أطر LLM (LangChain، OpenRouter، أو ما يماثلها) مطبقة في مهام الأتمتة؛ اهتمام دقيق بالتفاصيل والتزام بدقة البيانات؛ أخلاقيات عمل ذاتية مع القدرة على استكشاف الأخطاء بشكل مستقل؛ وجود رابط GitHub ميزة؛ الكفاءة الإنجليزية: مستوى فوق المتوسط (B2) أو أعلى (مطلوب). توقعات وقت المشروع: لهذا المشروع، من المتوقع أن تستغرق المهام حوالي 10–20 ساعات في الأسبوع خلال المراحل النشطة، وفقاً لمتطلبات المشروع. هذه تقديرات وليست عبء عمل مضمون، وتطبق فقط أثناء نشاط المشروع. التعويض: في هذا المشروع، يمكن للمساهمين الحصول على ما يصل إلى 37 دولاراً أمريكياً في الساعة المكافئة، اعتماداً على المستوى وتيرة المساهمة. يختلف التعويض عبر المشاريع وفقاً للنطاق والتعقيد والخبرة المطلوبة. يرجى ملاحظة أن مشاريع أخرى على المنصة قد تقدم مستويات كسب مختلفة بناءً على متطلباتها. </div>

Full Time Bayt

Solution Engineer

On-site - Qatar - Doha 1 August 2026

Telecom & Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Overview Come build community, explore your passions and do your best work at Microsoft with thousands of University interns from every corner of the world. This opportunity will allow you to bring your aspirations, talent, potential—and excitement for the journey ahead.   As a Solution Engineer Intern, you will engage with customers, with coaching from others. You will have the opportunity to shadow customer stakeholder interactions and research customer context to gain and understanding and build product expertise. You will contribute to technical wins, or portions of technical wins, with support from peers through preparation and delivery of one-way presentations. At Microsoft, interns work on real-world projects in collaboration with teams across the world, while having fun along the way. You’ll be empowered to build community, explore your passions and achieve your goals. This is your chance to bring your solutions and ideas to life while working on cutting-edge technology.  Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond. Responsibilities Program Start Date: January 2027 About: Erada Program is Microsoft's program tailored for Qatari Nationals, aiming to accelerate Qataris employability and create market impact through Early-in-Profession recruitment, and skilling programs. Program overview:  Microsoft Erada Internship is a paid six-month training program that offers globally recognized technical and professional certifications & skills, and on-the-job training to include mentoring, coaching, job shadowing and real-life scenario assignments. Program Details: The 6 months, full-time program is divided into two key phases (Phase 1 - Onboarding & Skilling, Phase 2 - On The Job Training) Phase one: Onboarding & Skilling Bootcamp (1 month) <ul><li>Onboarding and introduction to Microsoft’s mission, culture, strategy & structure.</li><li>Technical skilling to obtain globally recognized Microsoft technical certifications.</li><li>Professional and soft skilling courses including project management, change management, effective interpersonal skills, creativity and innovation, and time management.</li></ul>Phase two: On-the-job training (5 months) <ul><li>Joining as an SE for on-the-job shadowing and training.</li><li>Mentorship and coaching sessions.</li><li>Supporting Microsoft teams in digital transformation projects.</li><li>Advanced technology trainings including AI, Machine Learning & Cloud Computing. </li></ul>Responsibilities: <ul><li>Build awareness of need for product strategy based on customer feedback, and build awareness of need for compete strategies.</li><li>Consume and leverage readiness materials to expand domain knowledge, and begin connecting with customers and promote internal team readiness.</li><li>Engage with customers, with coaching from others. You will shadow in customer stakeholder interactions and research customer context to gain understanding and build product expertise. You will develop awareness of available resources by familiarizing yourself with the community and engaging others to gain product knowledge.</li><li>Develop foundational awareness of working with reference architectures and assist in demonstrations of specific Microsoft products through preparation and execution.</li></ul> Qualifications Minimum Qualifications <ul><li>Currently pursuing/ completed a Bachelor's/ Master's Degree in Information Technology (IT), Computer Science, Engineering, Business Administration, Business, or related field.</li><li>Qatar nationality.</li><li>Legally authorized to work in Qatar (Legally authorized = Has citizenship or has been granted a valid visa or work permit).</li><li>Fluency in English.</li></ul>Preferred Qualifications <ul><li>Passion for technology and customer obsessed.</li><li>Excellent verbal and written communication, analytical and presentation skills. </li><li>Strong Desire and business acumen for consultative solution selling.</li><li>Exceptional negotiation, customer service, and interpersonal skills.</li></ul>#EiP #MCAPSEiP This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled. Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations. </div>

<h2 class="h5">وصف الوظيفة</h2> <div class="t-break" data-jb-field="description"> نظرة عامة انضم لبناء مجتمع، استكشف شغفك، وأدِ عملك بأفضل ما لديك في مايكروسوفت مع آلاف المتدربين الجامعيين من كل أنحاء العالم. ستتيح لك هذه الفرصة أن تجلب طموحاتك وموهبتك وإمكاناتك—and حماسك للرحلة المقبلة. كمتدرب مهندس حلول، ستتفاعل مع العملاء، وتحت إشراف آخرين. ستحظى بفرصة متابعة تفاعلات أصحاب المصالح مع العملاء والبحث في سياق العميل لاكتساب فهم وبناء خبرة المنتج. ستساهم في الفوزات التقنية، أو أجزاء من الفوزات التقنية، بدعم من الزملاء من خلال التحضير وتقديم عروض من جهة واحدة. في مايكروسوفت، يعمل المتدربون على مشاريع واقعية بالتعاون مع فرق من جميع أنحاء العالم، مع الاستمتاع أثناء العمل. ستتمكن من بناء المجتمع، واستكشاف شغفك وتحقيق أهدافك. هذه فرصتك لتجسيد حلولك وأفكارك أثناء العمل على تكنولوجيا متقدمة. رسالة مايكروسوفت هي تمكين كل شخص وكل مؤسسة على الكوكب لتحقيق المزيد. كموظفين نجتمع بعقلية النمو، نبتكر لتمكين الآخرين، ونتعاون لتحقيق أهدافنا المشتركة. كل يوم نبني على قيمنا من الاحترام والنزاهة والمسؤولية لخلق ثقافة شمولية يستطيع فيها الجميع الازدهار في العمل وخارجه. المسؤوليات تاريخ بدء البرنامج: يناير 2027 عن: برنامج إرادة هو برنامج مايكروسوفت المصمم لـ المواطنين القطريين، يهدف إلى تسريع توظيف القطريين وإحداث تأثير في السوق من خلال التوظيف المبكر في المهن وبرامج المهارات. نظرة عامة على البرنامج: تدريب إرادة مايكروسوفت هو برنامج تدريب مدفوع لمدة ستة أشهر يوفر شهادات تقنية ومهنية معترف بها عالميًا، ومهارات وتدريباً على رأس العمل يشمل الإرشاد والتوجيه والتظليل الوظيفي ومهام سيناريوهات واقعية. تفاصيل البرنامج: يتم تقسيم البرنامج الذي يستمر ستة أشهر، بدوام كامل إلى مرحلتين رئيسيتين (المرحلة 1 - التوجيه والتأهيل، المرحلة 2 - التدريب أثناء العمل) المرحلة الأولى: التوجيه والتأهيل في معسكر تدريبي لمدة 1 شهر <ul><li>التوجيه والتعريف بمهمة مايكروسوفت وثقافتها واستراتيجيتها وهيكلها.</li><li>تأهيل تقني للحصول على شهادات تقنية معترف بها عالميًا من مايكروسوفت.</li><li>دورات تطوير مهنّيّة ومهارات ناعمة بما في ذلك إدارة المشاريع، إدارة التغيير، المهارات الشخصية الفعالة، الإبداع والابتكار، وإدارة الوقت.</li></ul>المرحلة الثانية: التدريب أثناء العمل (5 أشهر) <ul><li>الانضمام كـ SE للتظليل والتدريب أثناء العمل.</li><li>جلسات الإرشاد والتوجيه.</li><li>دعم فرق مايكروسوفت في مشاريع التحول الرقمي.</li><li>تدريبات تكنولوجية متقدمة تشمل الذكاء الاصطناعي، تعلم الآلة، والحوسبة السحابية.</li></ul>المسؤوليات: <ul><li>رفع الوعي بالحاجة إلى إستراتيجية منتج بناءً على ملاحظات العملاء، ورفع الوعي بالحاجة لاستراتيجيات تنافسية.</li><li>استهلاك واستغلال مواد الجاهزية لتوسيع المعرفة في المجال، والبدء بالتواصل مع العملاء والترويج لاستعداد الفريق الداخلي.</li><li>التفاعل مع العملاء، مع الإرشاد من الآخرين. ستتبع تفاعلات أصحاب المصلحة مع العملاء وتبحث في سياق العميل لاكتساب فهم وبناء خبرة المنتج. ستطور وعيًا بالموارد المتاحة من خلال التعرف على المجتمع ومشاركة الآخرين لاكتساب معرفة المنتج.</li><li>تطوير وعي أساسي بالعمل مع بنى مرجعية والمساعدة في عروض توضيحية لمنتجات مايكروسوفت محددة من خلال التحضير والتنفيذ.</li></ul> المؤهلات أدنى المؤهلات <ul><li>الطموح حاليًا/إكمال درجة البكالوريوس/الماجستير في تكنولوجيا المعلومات، علوم الحاسب، الهندسة، إدارة الأعمال، الأعمال التجارية، أو مجال ذي صلة.</li><li>الجنسية القطرية.</li><li>الموافقة القانونية للعمل في قطر (الموافقة القانونية = أن يحمل الجنسية أو تم منحه تأشيرة أو تصريح عمل صالح).</li><li>إتقان اللغة الإنجليزية.</li></ul>المؤهلات المفضلة <ul><li>شغف بالتكنولوجيا وتركز على العملاء.</li><li>مهارات تواصل شفهي وكتابي ممتازة، تحليلية وعرضية.</li><li>رغبة قوية وفهم تجاري لبيع الحلول استشارياً.</li><li>مهارات تفاوض وخدمة عملاء وتواصل شخصية استثنائية.</li></ul>#EiP #MCAPSEiP سيكون هذا المنصب مفتوحًا لمدة لا تقل عن 5 أيام، مع قبول الطلبات بشكل مستمر حتى ملء المنصب. مايكروسوفت شركة توظيف توفر فرص متكافئة للجميع. سيُنظر في جميع المتقدمين المؤهلين دون التمييز بسبب العمر، الأصل، الجنسية، اللون، إجازة رعاية أسريّة أو طبية، هوية التعبير الجندري أو تعبيره، المعلومات الوراثية، حالة الهجرة، الحالة الاجتماعية، الحالة الطبية، الأصل القومي، الإعاقة البدنية أو العقلية، الانتماء السياسي، المحارب المحمي أو الوضع العسكري، العرق أو الإثنية، الدين، الجنس (بما في ذلك الحمل)، التوجه الجنسي، أو أي سمة محمية أخرى وفق القوانين واللوائح المحلية المعمول بها. إذا كنت تحتاج إلى مساعدة في الترتيبات الدينية و/أو أي تسهيلات معقولة بسبب إعاقة أثناء عملية التقديم، اقرأ المزيد عن طلب التسهيلات. </div>

Full Time LinkedIn

Senior Engineer - Drainage

Hybrid - Qatar - Doha 20 August 2026

Telecom & Technology

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description We are seeking a detail-oriented and innovative Senior Engineer - Drainage to join our team in Doha, Qatar. You will be responsible for executing complex drainage system designs. This position offers the opportunity to work on meaningful infrastructure projects while contributing to the growth and success of our organization. Design, develop, and independently complete primary drainage system elements for engineering works, ensuring compliance with Qatar building codes and MME standards Gather, analyze, and correlate engineering data using established procedures and industry best practices to support project development Perform detailed hydraulic calculations, modeling, and testing to validate drainage system performance and efficiency Identify discrepancies in engineering results and propose analytical solutions using both standard procedures and innovative modifications Manage project timelines and budgets with minimal supervision, demonstrating efficient organization and decisive decision-making Mentor and provide technical guidance to entry-level engineers, fostering a collaborative and supportive work environment Conduct site assessments and surveys to evaluate drainage requirements and develop comprehensive solutions Prepare technical documentation, design drawings, and reports using CAD software and industry-standard tools Collaborate with cross-functional teams including architects, contractors, and stakeholders to ensure project success Stay current with evolving drainage technologies and best practices to drive continuous improvement Qualifications Valid MME (Ministry of Municipality and Environment) professional engineering registration/license Qatar experience Fluent in Arabic and English Bachelor's degree in Civil Engineering, Environmental Engineering, or related discipline Minimum 12+ years of professional experience in drainage engineering or related infrastructure projects Proven expertise in drainage system design, hydraulic modeling, and analysis Proficiency with CAD software and engineering design tools Strong knowledge of Qatar building codes, regulations, and local environmental standards Demonstrated experience managing engineering projects within budget and schedule constraints Excellent analytical and problem-solving skills with attention to detail Experience mentoring and supervising junior engineering staff Strong written and verbal communication skills in English Project management capabilities and ability to work independently with minimal supervision Familiarity with site assessment methodologies and survey procedures Professional commitment to quality, transparency, and ethical engineering practices Additional Information At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. Req ID: J10157037 Business Line: Transportation Business Group: DCS Strategic Business Unit: ME and Africa Career Area: Engineering Work Location Model: Hybrid

Full Time LinkedIn

Engineer - Hook-up E&I

On-site - Qatar - Doha 18 August 2026

Customer Service

Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions. Always oriented towards technological innovation, the company’s purpose is “Engineering for a sustainable future”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than 50 countries around the world and employs about 30,000 people of over 130 nationalities. Purpose Of The Position As Hook-up Engineer E&I, you will respond/report to the Hook-up Manager and be part of our company’s various project, within Hook-up Department. How can you support us? Here are below your responsibilities: Mission Coordinate and supervise all engineering activities related to Hook-up E&I. Provide Hook-up expertise during the bid phase, project preparatory phases (Home Office and Yard), and offshore execution phase, for all engineering activities related to Hook-up E&I. Ensure effective interfaces with Fabrication yards (internal or external) and Transportation & Installation (T&I) for scope definition and management of carry-over works, ensuring safe, efficient, and cost-effective offshore execution. Tasks Propose engineering solutions aimed at identifying optimized configurations for transportation and installation using the available marine spread, minimizing offshore Hook-ups and improving construction sequences and methodologies Provide Hook-up E&I inputs to engineering reviews (Constructability, 3D Model Reviews, HAZID, etc.) Participate in the execution of Hook-up engineering activities, including identification of multidisciplinary Hook-up scope, preparation of Hook-up procedures, and compilation of discipline Work Packages Perform technical activities related to drawings, MTOs, job cards, constructability reviews, and engineering studies Liaise with Hook-up Planning and Control Analyst for the preparation of Hook-up Job Cards, in line with construction, installation, and commissioning plans Participate in the preparation of multi-disciplinary Hook-up procedures Prepare the Hook-up project deliverables list and ensure documents and procedures are developed, reviewed, and issued accordingly Define subcontract scopes of work and support the preparation of Technical Bid Evaluations related to Hook-up activities Prepare marine spread specifications and follow up relevant bids Ensure efficient, safe, and cost-effective marine spread scheduling Verify, through dedicated surveys, the suitability of vessels to safely and efficiently support Hook-up activities, ensuring steady manpower and material supply offshore Ensure correct interfaces with other project functions during Hook-up engineering activities Collect red mark-up engineering documentation at site to support As-Built drawings preparation Support the Hook-up Manager by ensuring proper follow-up of Hook-up engineering activities from Home Office, Yard, or Site, including updates to Job Cards as required Supervise the analysis of Hook-up requirements related to Welding, Piping, Coating, and Quality Control, ensuring implementation of any special requirements ahead of offshore campaigns What are we looking for? Education Engineering Degree, preferably in Electrical & Instrumentation (E&I) or related engineering discipline Experience Minimum 8 years of Oil & Gas experience as Hook-up Engineer E&IProven experience supporting Hook-up activities throughout bid, engineering, yard, and offshore phases Experience interfacing with Fabrication yards, T&I contractors, and multidisciplinary engineering teams Familiarity with offshore construction, Hook-up methodologies, and EPCI project execution Languages Proficient in English (written and spoken) Ability to work effectively within multinational project teams Technical Skills / Knowledge Knowledge of Hook-up E&I engineering methodologies and offshore construction practices Experience in preparation and review of Hook-up procedures, Work Packages, MTOs, and Job Cards Understanding of marine spread logistics and offshore installation constraints Awareness of HSE requirements, offshore execution risks, and quality control interfaces IT Skills Microsoft Office Suite Excel (tracking, logs, planning support) Word (technical documentation and procedures) Power Point (engineering and project reporting) Outlook (coordination and communication) What Can We Offer To You Permanent Contract – Project-based position Corporate Benefits: We offer a comprehensive benefits package Working Hours: 45 hours (9 hours x 5 days) Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals Location: Doha, Qatar Additional Information We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form! We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress. Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem. Find out more on our career page here One vision, many paths, limitless possibilities. PRIVACY POLICY In accordance with the Qatar's Personal Data Privacy Protection Law (PDPPL) enacted as Law No. 13 of 2016 (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D. Lgs 196/03 and art 13 GDPR 679/16)

Full Time

Voice Network L2 Engineer

On-site - Qatar - Doha 11 August 2026

Information Technology

Job Title – Voice Network L2 Engineer / VoIP Specialist Company – TCS (MEA) Location – Doha, Qatar Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description: Key Responsibilities1. Advanced Troubleshooting & Fault Isolation Perform deep-dive troubleshooting for: SIP call failures, call drops, one-way/no audio issues PRI/E1 link issues (LOS, LOF, slips, framing errors) SBC (Session Border Controller) issues Softswitch / IMS-related signaling failures Analyze: SIP call flows (INVITE, BYE, REGISTER, etc.) RTP media path issues (latency, jitter, packet loss) Identify problem domain: Core voice network Customer CPE / IP-PBXCarrier interconnect Access/backhaul network 2. Incident Resolution & Service Restoration Own and resolve P1/P2 incidents escalated by L1Drive restoration within defined MTTR targets Perform: Call flow tracing and log analysis SIP ladder analysis and debugging PRI circuit validation and diagnostics Lead troubleshooting during major voice outages 3. Protocol & Signaling Expertise Strong working knowledge of: SIP, RTP, RTCPISDN PRI (Q.931 signaling) VoIP codecs (G.711, G.729, etc.) Analyze: Registration issues Call routing misconfigurations Codec mismatch / negotiation issues 4. Root Cause Analysis (RCA) Perform detailed RCA for: Call drops / failure spikes Recurring voice congestion Intermittent quality degradation Identify root causes such as: Network congestion / jitter Misconfiguration Routing / dial plan issues ISP/carrier-related faults Provide Corrective & Preventive Actions (CAPA) 5. Change & Implementation Support Validate and support: Voice routing changes SIP trunk configuration updates PRI migrations / provisioning Softswitch / SBC upgrades Perform impact analysis, pre-checks, post-validation, and rollback planning 6. Vendor & Carrier Coordination Coordinate with: OEMs (Cisco, Avaya, Ribbon, Audiocodes, etc.) SIP/PRI carriers and service providers Handle TAC/vendor escalations Track resolution and ensure timely closure 7. Performance & Quality Management Monitor and analyze: Call success rate (ASR, ACD) Call quality KPIsPacket loss, jitter, latency Identify and resolve chronic voice quality issues Suggest optimization: QoS tuning Bandwidth optimization Routing improvements 8. L1 Support & Technical Governance Provide technical guidance to L1 team Validate L1 troubleshooting and escalations Enhance: SOPsKnowledge base articles Troubleshooting frameworks 9. Major Incident Management Lead bridge calls for critical outages Drive coordination across: Network teams Carriers Enterprise customers Ensure: Timely updates Impact assessment Quick restoration Required Technical Skills Core Voice Expertise Strong knowledge of: VoIP / SIP / RTP protocols PRI / ISDN signaling IP Telephony & Call Control IMS / Softswitch architecture Networking Knowledge TCP/IP, subnetting, routing basics Understanding of: QoS (voice prioritization) MPLS/Internet transport impact on voice Tools & Platforms Experience with: NMS/EMS tools Packet capture tools (Wireshark preferred) CLI-based troubleshooting Ticketing tools (Service Now/Remedy), Application Deadline: 20-Sep-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

Full Time

Voice Network L2 Engineer

On-site - Qatar - Doha 10 August 2026

Information Technology

Inspection Engineer Jobs in Qatar

Data Network L2 Engineer

Information Technology Support Engineer

Information Technology Support Engineer

System Engineer

Video Surveillance (CCTV) & Servers Engineer

Principal Piping Engineer

Licensed Aircraft Engineer - Line Maintenance (B1)

Aircraft Engineer

Application Engineer

Lead Cost Control Engineer

Senior Technical Engineer

EOI Principal Piping Engineer – Offshore

Java Software Engineer

Licensed Aircraft Engineer - Heavy Maintenance B1

Senior Python Data Scraping Engineer (Freelance)

Solution Engineer

Senior Engineer - Drainage

Engineer - Hook-up E&I

Voice Network L2 Engineer

Voice Network L2 Engineer

Site Owners

Employers

Job Seekers

Inspection Engineer Jobs in Qatar

Receive email alerts for Inspection Engineer Jobs in Qatar jobs