Heavy equipment mechanical engineer Jobs

<p>The Lead Process Improvement Engineer Facility Management is responsible for driving continuous improvement, operational excellence, quality assurance and cost optimisation across Facility Management operations. The role works closely with operational, technical and commercial teams to assess actual service delivery, identify performance and cost gaps, improve processes and ensure consistent compliance with contractual requirements, internal standards and industry best practices. This is a highly field-driven and analytical role, requiring regular engagement with operational sites, clients and internal stakeholders across both Hard and Soft FM Services.</p><p><strong>Key Responsibilities</strong></p><p><strong>Operational Excellence &amp; Site Performance</strong></p><ul><li>Conduct regular site visits and operational assessments to evaluate actual service delivery and performance.</li><li>Identify gaps between reported performance and actual site conditions.</li><li>Review Hard and Soft FM service delivery and recommend practical improvements.</li><li>Identify operational risks and support site teams in implementing effective corrective measures.</li><li>Challenge existing working practices where required and promote greater consistency across FM contracts.</li><li>Support the standardisation of processes, procedures and operational best practices across sites.</li></ul><p><strong>Process Improvement &amp; Continuous Improvement</strong></p><ul><li>Lead continuous improvement and process optimisation initiatives across FM operations.</li><li>Analyse existing workflows and identify opportunities to improve efficiency, productivity, quality and cost.</li><li>Develop and implement improved processes in coordination with operational and functional teams.</li><li>Lead Root Cause Analysis (RCA) for recurring operational failures and service issues.</li><li>Ensure corrective and preventive actions are implemented and monitored through to closure.</li><li>Apply Lean, Six Sigma, TQM and other recognised process improvement methodologies where appropriate.</li></ul><p><strong>Quality Assurance, Audits &amp; Compliance</strong></p><ul><li>Conduct structured operational, quality and performance audits across FM contracts.</li><li>Identify non-conformances and areas for improvement.</li><li>Develop, monitor and close corrective action plans.</li><li>Ensure operational activities comply with contractual requirements, internal procedures and relevant industry standards.</li><li>Support implementation and maintenance of applicable ISO management systems and FM best practices.</li></ul><p><strong>SLA, KPI &amp; Performance Management</strong></p><ul><li>Review and optimise SLA and KPI frameworks in line with contractual requirements.</li><li>Analyse operational performance and identify trends, recurring issues and areas requiring management intervention.</li><li>Develop dashboards, reports and performance presentations.</li><li>Translate operational data into clear and actionable recommendations for management and site teams.</li><li>Support continuous improvement of service quality and client satisfaction.</li></ul><p><strong>Commercial &amp; Cost Optimisation</strong></p><ul><li>Support budgeting, estimation and pricing activities from an operational and technical perspective.</li><li>Review existing cost structures, resource assumptions and estimation methodologies.</li><li>Identify inefficiencies, cost leakage, overestimation and opportunities for optimisation.</li><li>Recommend cost-effective operational solutions without compromising service quality or contractual compliance.</li><li>Support alignment between commercial assumptions and actual operational requirements.</li><li>Contribute to cost reduction and efficiency initiatives across both live contracts and new bids/tenders.</li></ul><p><strong>Client &amp; Stakeholder Engagement</strong></p><ul><li>Engage with clients and key stakeholders to understand operational concerns and service expectations.</li><li>Support proactive resolution of service delivery issues.</li><li>Work closely with Operations, Technical, Commercial, Estimation, QHSE and other functional teams.</li><li>Promote a culture of continuous improvement, accountability and operational excellence across FM operations.</li></ul><p><strong>ESG &amp; Sustainability</strong></p><ul><li>Support sustainability and ESG initiatives across FM contracts.</li><li>Identify opportunities for improved energy efficiency, waste management and environmental performance.</li><li>Support compliance with environmental and sustainability requirements.</li><li>Contribute to relevant ESG, energy and sustainability reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications &amp; Experience</h2><h3>Education</h3><p>Bachelor s Degree in one of the following or a related discipline: Mechanical Engineering, Electrical Engineering, Industrial Engineering, Environmental Engineering, Building Services Engineering, Facilities/Asset Management Engineering</p><h3>Experience</h3><ul><li>Minimum 8 10 years of relevant experience within Facility Management.</li><li>Strong experience in process improvement, operational excellence and/or Total Quality Management (TQM).</li><li>Demonstrable experience working directly with FM site operations.</li><li>Strong understanding of both Hard and Soft FM Services.</li><li>Experience conducting operational audits, quality assessments and performance reviews.</li><li>Experience managing SLA/KPI frameworks and corrective action processes.</li><li>Exposure to estimation, budgeting, resource optimisation and operational cost analysis is highly desirable.</li></ul><h3>Certifications</h3><ul><li>Lean Six Sigma Black Belt highly preferred/required. Strong Lean Six Sigma Green Belt candidates with demonstrable process improvement experience may be considered.</li><li>ISO 9001 Internal Auditor certification preferred.</li><li>Recognised Facility Management certification is advantageous.</li></ul><h3>Technical Knowledge</h3><p>Candidates should demonstrate good working knowledge of:</p><ul><li>Hard Services / MEP maintenance</li><li>Soft Services operations</li><li>Asset and maintenance management</li><li>Cleaning standards and best practices</li><li>Waste management and environmental practices</li><li>Quality Management Systems</li><li>Root Cause Analysis</li><li>SLA and KPI development</li><li>Process mapping and optimisation</li><li>Cost and resource optimisation</li><li>CAFM/CMMS environments</li><li>Knowledge of relevant international standards is advantageous, including: ISO 9001 Quality Management, ISO 14001 Environmental Management, ISO 41001 Facility Management, ISO 45001 Occupational Health &amp; Safety, ISO 50001 Energy Management Systems</li></ul><h3>Tools</h3><ul><li>Strong proficiency in: Microsoft Excel, Microsoft PowerPoint, Microsoft Word</li><li>Experience with some of the following is advantageous: Power BI or similar data visualisation tools, Microsoft Visio or equivalent process mapping tools, CAFM/CMMS platforms, MS Project, Primavera P6, Monday.com, Asana, Jira, Trello, Root Cause Analysis tools including 5 Whys and Fishbone Analysis</li></ul><h3>Key Competencies</h3><p>The successful candidate should be:</p><ul><li>Highly proactive and comfortable working independently</li><li>Field-driven with a strong understanding of actual site operations</li><li>Analytical and data-driven</li><li>Commercially aware and cost-conscious</li><li>Confident challenging existing processes and operational practices</li><li>Strong in problem-solving and Root Cause Analysis</li><li>Capable of influencing operational teams and stakeholders</li><li>Focused on measurable and sustainable improvement</li><li>Able to manage multiple contracts, priorities and improvement initiatives simultaneously</li><li>Strong in reporting, presentation and stakeholder communication</li></ul><p>The role requires an individual who can combine technical FM knowledge, process improvement expertise and commercial awareness to deliver measurable improvements in service quality, efficiency, compliance and cost performance.</p>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations. Process Control and Instrumentation skills Troubleshooting abilities Calibration expertise Experience in the manufacturing industry</p><p><strong>Desired Candidate Profile</strong></p><p>Education : BE Instrument</p>

About the Role We are looking for an experienced Senior AI Engineer who can develop AI systems and tools. In this role, you will bridge the gap between artificial intelligence and robust software engineering by building the backend infrastructure that brings our AI solutions to life in production. What You'll DoDesign, develop, and deploy scalable AI systems and internal tools. Architect, build, and maintain the backend systems required to support complex AI operations. Integrate machine learning models into secure, production-ready environments. Ensure the performance, reliability, and scalability of AI-driven applications and APIs. What We're Looking For Proven experience working as a Senior AI Engineer, Machine Learning Engineer, or Backend Software Engineer. Strong backend development skills and a deep understanding of software engineering principles. Hands-on experience building, scaling, and deploying AI tools and systems. Solid understanding of API design, cloud infrastructure, and database management.

<p>We are hiring an Electrical Engineer to join our team.</p><p><strong >Requirements:</strong><br><span >B.E./B.Tech in Electrical Engineering</span><br><span >UPDA Certification (Mandatory)</span><br><span >Minimum 2 years of experience in Fire Fighting and Fire Alarm projects</span><br><span >Strong project execution and technical knowledge</span><br><span >Qatar Driving License and QCD Certification are advantages</span><br><span >Immediate joiners with valid QID and NOC</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>We are hiring a Senior Site Engineer with 8+ years of experience in large-scale infrastructure projects. Responsibilities include site supervision, subcontractor coordination and QA/QC compliance. GCC experience preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>8+ years of experience in large-scale infrastructure projects. GCC experience preferred.</p>

We are Hiring !!!!<br> Handover Engineer (MEP) Duration: 4 months (Can be extended further) Location: Industrial Area<br>Minimum 12-15 years of experience Worked on PWA projects as Handover Engineer / Testing Engineer (8-10 years exp.) Worked on Drainage/Infrastructure projects Worked with Engineering Consultant/Contractor & PWA Approval (Mandatory from DNPD, RDP or O&M Dept.) Valid QID Immediate joiners preferred

<p> The Resident Engineer shall provide day-to-day IT operational support, infrastructure administration, troubleshooting, preventive maintenance, user assistance, and coordination with the organization's IT management and relevant vendors. The engineer will support the organization's end-user computing environment, network infrastructure, Microsoft 365 environment, security systems, servers, backup systems, telephony, and other IT infrastructure. The Resident Engineer will work under the direction and supervision of the organization's designated IT Manager / IT Representative.</p><p><strong>Desired Candidate Profile</strong></p><p>The proposed Resident Engineer should have practical experience in:</p><ul><li><p>Windows 10/11 administration and troubleshooting; Microsoft Active Directory.</p></li><li><p>Microsoft 365, Microsoft Entra ID and Microsoft Intune.</p></li><li><p>LAN/WAN troubleshooting, TCP/IP, DNS, DHCP, VLANs and switching.</p></li><li><p>Aruba network switches and Wi-Fi troubleshooting.</p></li><li><p>Palo Alto Networks firewalls.</p></li><li><p>Windows File Server administration.</p></li><li><p>Barracuda Backup and Barracuda Web Application Firewall.</p></li><li><p>NEC telephone/PBX systems.</p></li><li><p>Structured cabling and IT hardware troubleshooting.</p></li></ul><p>Relevant Microsoft, Aruba, Palo Alto, Barracuda, networking or cybersecurity certifications will be considered as a preference.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Apache Mechanical Technician – General</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Qatar Incorporated<br><br><p>Boeing Global Service is seeking an <b>Apache Mechanical Technician - General</b> to join the AH-64 Qatar Air Force Maintenance Augmentation Team (MAT) located at <b>Al Udeid Air Base, Qatar</b>.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>Performs AH-64E aircraft maintenance tasks and performs air crew-member duties as required using the QAF specific AH-64E IETM, AH-64E Operators Manual, AH-64E Maintenance Test Flight Manual, and AH-64E Check List Manual.</p><br><br></li><li><p>Removes and installs aircraft systems and subsystem assemblies and components including engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. Services and lubricates aircraft systems, subsystems, and components.</p><br><br></li><li><p>Prepares aircraft for inspections and maintenance checks.</p><br><br></li><li><p>Performs scheduled and unscheduled aircraft maintenance actions.</p><br><br></li><li><p>Uses common measuring tools, precision measuring gauges and alignment fixtures.</p><br><br></li><li><p>Performs aircraft and related components routine and special inspections.</p><br><br></li><li><p>Performs maintenance operational checks.</p><br><br></li><li><p>Diagnoses and solves problems aircraft subsystems using special tools and equipment as required.</p><br><br></li><li><p>Uses and performs operator maintenance on tools, special tools, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</p><br><br></li><li><p>Prepares aircraft maintenance forms and records. Provide OJT, coaching, and mentorship to the QAF personnel in the use of all applicable technical publications, tools, test equipment, AGSE, PGSE, and special equipment applicable to the subject area of aircraft maintenance, enabling them to become effective AH-64E aircraft mechanics.</p><br><br></li><li><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to accurate failures or implement changes.</p><br><br></li><li><p>Coordinates assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment.</p><br><br></li><li><p>Fixes complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</p><br><br></li><li><p>Performs validation/verification testing of systems and components.</p><br><br></li><li><p>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</p><br><br></li><li><p>Inspects components and verifies repairs for flight worthiness requirements.</p><br><br></li><li><p>Coordinates training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li><li><p>Travel on short notice.</p><br><br></li><li><p>Travel both domestically and internationally.</p><br><br></li></ul><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>6+ years of experience with the AH-64D, or AH-64E, aircraft.</p><br><br></li><li><p>3+ years of experience with Unit Level Logistics System-Aviation (ULLS-A(E)) and with Enhanced Logbook Automation System (ELAS) entries.</p><br><br></li><li><p>Successfully completed and be qualified by the appropriate U.S. Government armed forces aircraft maintenance course or civilian equivalent training.&nbsp;Contractor factory training or other equivalent training by industry shall be reviewed and approved by the PCO or their designated representative and/or the GFR as substitute.</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>Possess Airframe and Powerplant license or equivalent.</p><br><br></li><li><p>Army Service School Instructor or civilian equivalent instructing experience for aircraft Electrical/Avionics/Armament/Fire Control/Aircraft Survivability Equipment (ASE) Technicians.</p><br><br></li><li><p>Prior experience or qualified in another aviation maintenance field.</p><br><br></li><li><p>Prior experience working in the Southwest Asia/desert region.</p><br><br></li></ul><br><p><b>This requisition is for an international, locally hired position in Al-Udeid, Qatar. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Qatari law. Employment is subject to the candidate's ability to satisfy all Qatari labor and immigration formalities.</b></p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position does not require a Security Clearance.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Qatar)<br> </div>

<p><br></p><p>Company provides : Accommodation &amp; local transportation</p><p>Contract Period : 2 Years</p><p>Interview Mode : Online</p><p><br></p><p><b>Role: Project Engineer</b></p><p>Industry Type: Recruitment / Staffing</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Electrical</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

Job Description<br><br>Flowline Engineer - Lead<br><br>Responsibilities<br><br>Flowline Engineer - Lead

<p>Sales &amp; Marketing Engineer Promotion, Sales, BDM &amp; CRM with Oil &amp; Gas with Qatar Oil &amp; Gas Companies like Asghal, Qatar Energy etc Secure New Agencies Market Research</p><p><strong>Desired Candidate Profile</strong></p><p>Required Candidate profile Salary: QR 4500 - 5000 Free Accom Online Interview Work VISA Qatar experience in Oil &amp; Gas Companies GCC Driving Licence Send CV &amp; Document to EMAIL_ADDRESS WhatsApp: PHONE_NUMBER</p>

Job Title: Sales Engineer Job Location: Qatar<br>Job Summary We are looking for a Sales Engineer with experience in building materials and construction chemicals to develop new business opportunities and manage client relationships in the Qatar market. The ideal candidate should have strong technical and sales skills, and a proven track record of achieving sales targets.<br>Requirements Bachelor's degree in Engineering. Minimum 2 years of relevant sales experience in building materials and construction chemicals. Proven experience and strong knowledge of the Qatar market. Valid Qatar Driving License. Strong sales, communication, negotiation, and client relationship management skills. Proven ability to develop new business opportunities and achieve sales targets.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Greetings from Voltech HR Services !!!</p><p><br></p><p><br></p><p>Company Details:</p><p><br></p><p><br></p><p>Company: : Voltech Engineers Pvt Ltd</p><p><br></p><p><br></p><p>Position : Commissioning Engineer</p><p><br></p><p><br></p><p>Experience : Min 8 years</p><p><br></p><p><br></p><p>Qualification : B.E (Electrical)</p><p><br></p><p><br></p><p>Location : Qatar</p><p><br></p><p><br></p><p>Salary : Negotiable</p><p><br></p><p><br></p><p>Company provides : Accommodation &amp; local transportation</p><p><br></p><p>Role: Electrical Engineer</p><p>Industry Type: Recruitment / Staffing</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Electrical</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience : Min 8 years Qualification : B.E (Electrical)</p><p></p></section>

Looking for Civil Site Supervision Engineer, to work for grade C engineering consultancy office in Qatar.<br>· Has minimum 8 years of working experience in the same role in Qatar.<br>· Familiar with the Qatar municipalities regulation for architectural and Civil engineering.<br>· Minimum of grade B or C classification from Qatar engineering committee.<br>· Well represented and able to work with customers and staff in professional way.<br>· Has to be fluent in Arabic, and master English language.

We’re Hiring | Senior Security Engineer – F5 & Network Security ???????? Location: Qatar???? Experience: 10+ Years???? Education: Bachelor’s Degree in Computer Science, IT, or related field???? Joining: Immediate Joiners Preferred<br>We are looking for an experienced Security Engineer with strong expertise in F5 technologies, enterprise networking, load balancing, PKI, and high-availability environments.<br>???? Key Requirements:✅ 10+ years of relevant experience✅ 5+ years of Cisco enterprise networking experience✅ Strong knowledge of RIP, OSPF, BGP, MPLS & QoS✅ Hands-on experience with routers, switches, firewalls & load balancers✅ Strong expertise in F5 TMOS, CLI, LTM, GTM, ASM & APM✅ Experience with F5 or Kemp load-balancing solutions✅ Knowledge of Route Domains and complex gateway architectures✅ Strong PKI certificate management skills – CRL, OCSP & CA trust bundles✅ Experience in 24x7, high-availability & high-transaction environments✅ Strong technical documentation and implementation planning skills<br>???? Preferred Certifications:F5-CAF5-CTS – LTMF5-CTS – GTMF5-CTS – APM

Division: Sendian Integrated Facility Management (SIFM)<br><br>Job Description<br><br>SIFM, part of Sendian Group, is seeking an experienced Fire Alarm & Firefighting Systems Engineer to oversee the installation and maintenance of fire safety systems. The candidate will ensure all systems meet safety and regulatory standards.<br><br>Key Responsibilities<br><br>Manage installation, testing, and maintenance of fire alarm and firefighting systems. Conduct inspections and provide troubleshooting to ensure compliance. Collaborate with project teams and maintain system documentation.<br><br>Requirements<br><br>Certified engineer with a “C” grade or higher engineer license in Qatar. Strong experience in fire safety system installation and maintenance. Familiar with industry regulations and safety standards.<br><br>How To Apply<br><br>Send your CV to careers@sendiangroup.com or apply at sendiangroup.com/careers.

<b>Job Title: MEP Facility Engineer<br> <br>Location: Qatar<br></b> <br><b>Summary:<br></b>We are seeking a highly experienced MEP Facility Engineer to join our team. The ideal candidate will have a strong background in MEP and previous experience in Facility Management (FM). They should also possess a Bachelor's Degree in Engineering, a valid UPDA Certification, and at least 5 years of relevant experience. The successful candidate will be responsible for overseeing the maintenance and operation of our facilities, ensuring they are functioning efficiently and effectively.<br> <br><b>Key Responsibilities:</b><br>- Conduct regular inspections of facilities to identify any maintenance needs<br>- Develop and implement preventive and corrective maintenance plans<br>- Coordinate with contractors and vendors for maintenance and repair work<br>- Troubleshoot and resolve any facility-related issues<br>- Ensure compliance with all safety and environmental regulations<br>- Create and maintain accurate records and reports for all facility-related activities<br>- Manage and monitor the budget for facility maintenance and operations<br>- Provide leadership and guidance to the facility maintenance team<br>- Communicate effectively with team members, management, and other stakeholders<br>- Collaborate with other departments to ensure the smooth operation of facilities<br> <br><b>Requirements</b>:<br>- Bachelor's Degree in Engineering<br>- Valid UPDA Certification<br>- Minimum 5 years of relevant experience<br>- Previous experience in Facility Management (FM) is required<br>- Strong MEP background<br>- Knowledge of preventive and corrective maintenance<br>- Strong troubleshooting and problem-solving skills<br>- Good leadership, communication, and coordination skills<br> <br>If you are a highly skilled and motivated Facility Engineer with a passion for maintaining high-quality facilities, we want to hear from you!<p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A leading engineering consultancy is seeking an experienced <strong>Senior Civil Engineer</strong> to support a major infrastructure programme in Qatar.</p><br><br><p>The successful candidate will provide technical oversight and engineering support across civil and infrastructure works, ensuring compliance with project specifications, authority requirements, quality standards and approved designs.</p><br><br><p><strong>Key Responsibilities</strong></p><br><br><ul><li>Review civil engineering designs, drawings, specifications and technical submissions.</li><li>Provide technical supervision and support during project execution.</li><li>Monitor construction activities against approved designs and specifications.</li><li>Review method statements, material submissions and technical documentation.</li><li>Coordinate with contractors, consultants and client representatives.</li><li>Resolve technical and constructability issues.</li><li>Monitor progress and support reporting to project/client management.</li><li>Ensure compliance with relevant engineering standards and authority requirements.</li><li>Support inspection, testing, commissioning and handover activities.</li><li>Coordinate civil works with other engineering disciplines.</li></ul><p><strong>Candidate Requirements</strong></p><br><br><ul><li>Bachelor's degree in Civil Engineering.</li><li>Extensive professional experience in major <strong>civil/infrastructure projects</strong>.</li><li>Strong experience in roads, utilities, drainage and/or municipal infrastructure preferred.</li><li>Previous consultancy/client-side engineering experience advantageous.</li><li>Qatar/GCC infrastructure experience highly desirable.</li><li>Knowledge of applicable international engineering standards.</li><li>Professional/Chartered Engineer status advantageous.</li><li>Strong technical reporting and stakeholder-management capabilities.</li></ul> <br><br> </div>

<p>Role &amp; responsibilities Hiring: Senior Infrastructure Engineer (Network Operations Lead) Qatar Location: Qatar Onsite Employment Type: Contract Experience: 8+ Years We are looking for an experienced Senior Infrastructure Engineer (Network Operations Lead) with strong expertise in Azure, GCP, cloud networking, and enterprise network infrastructure.</p><p><strong>Desired Candidate Profile</strong></p><h2>Key Requirements:</h2><ul><li>8+ years of experience in Network Infrastructure &amp; Cloud Networking</li><li>Hands-on experience with Microsoft Azure and Google Cloud Platform (GCP)</li><li>Strong knowledge of Azure VNets, Azure Load Balancers, Network Security Groups (NSGs)</li><li>Hands-on experience with GCP VPCs and Firewall Rules</li><li>Expertise in Private Endpoints, Public Endpoints</li><li>Experience with VPN Gateway, Site-to-Site VPN, ExpressRoute Gateway</li><li>Strong understanding of Azure ExpressRoute, OCI FastConnect, and GCP Direct Connect</li><li>Hands-on experience with Palo Alto, Fortinet, and Check Point Firewalls</li><li>Experience managing F5 Load Balancers</li><li>Strong knowledge of BGP and OSPF routing protocols</li><li>Good understanding of Oracle Cloud Infrastructure (OCI), Virtual Cloud Network (VCN), FastConnect, and OCI Network Firewall (preferred)</li><li>Experience in network troubleshooting, implementation, migration, and production support</li></ul>

???????????????????????? ???????????????????????????????? – ???????? (????/// ???????????? & ????????????) | ????????????????????????????????????????????????????: ????????????????????????????????????????????????????: ???? ????????????????, ????????????????????????????????????????<br>We are looking for an experienced Senior L2 Operations Engineer to provide operational support across Ericsson Network Manager (ENM) and client's Network Engineer (ENE) production environments.<br>???????????????????????????????? ????????????????????????• Telecom domain experience.• Strong operational knowledge of Ericsson ENM and ENE.• L2 production operations/support experience.• Experience with order orchestration and revenue-assurance-related data fixes.• Production incident troubleshooting and RCA.• Automated build/deployment pipeline experience.• Release and deployment coordination.• Scripting capability using Python and/or Groovy, alongside shell scripting.• Strong customer-facing communication skills.<br>???????????????? ???????? ????????????????• Rosetta or similar deployment automation experience.• MySQL/JDBC exposure.• Apache Http Client knowledge.• Rhino/Java Script within JVM environments.• Experience with log-analysis platforms.• ITIL Foundation or higher certification.