Financial Analyst Jobs in Qatar

<p>Perform preventive and corrective maintenance ( breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.<br>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.<br>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels<br>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.<br>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.<br>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,<br>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.<br>Generate technical layouts and technical reports.<br>Understand and implement the basis of the Computer Maintenance Management Systems<br>Perform thermo graphic and analysis for the electrical equipment.<br>Provide assistance and guidance to other technical teams, whenever required<br>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>WE ARE HIRING – MULTIPLE POSITIONS</span><br></p><br><span><b>URGENT HIRING – Pipe Fitter / Pipe Fabricator / Structural Fabricator</b></span><br><p><b>Responsibilities:</b><br></p><br><ul><li>Perform installation, fabrication, assembly, and maintenance activities for piping systems and structural steel works as per project specifications.<br></li><li>Carry out pipe cutting, beveling, grinding, fit-up, alignment, and installation of pipes, valves, fittings, and supports.<br></li><li>Fabricate pipe spools, structural supports, platforms, beams, columns, and other steel structures as per approved drawings.<br></li><li>Read and interpret P&amp;IDs, isometric drawings, fabrication drawings, and structural drawings.<br></li><li>Perform marking, cutting, drilling, grinding, assembly, and dimensional checking activities.<br></li><li>Ensure proper alignment, leveling, fit-up, and quality of fabricated components.<br></li><li>Coordinate with welders, supervisors, QC inspectors, riggers, and other site teams.<br></li><li>Follow PTW, LOTO, PPE, and all site safety requirements during work execution.<br></li><li>Maintain good housekeeping and comply with project quality and HSE standard<br></li></ul><br><span>Requirements</span><p><b>Requirements:</b><br></p><br><ul><li>ITI / Diploma / Technical qualification in Mechanical, Fabrication, or related trade.<br></li><li>Minimum 3–5 years of relevant experience in Oil &amp; Gas, Petrochemical, Refinery, or Industrial projects.<br></li><li>Hands-on experience in pipe fitting, pipe spool fabrication, and structural steel fabrication works.<br></li><li>Ability to read and understand piping isometric drawings, P&amp;IDs, and fabrication drawings.<br></li><li>Knowledge of pipe materials, fittings, valves, supports, and structural steel components.<br></li><li>Experience in carbon steel, stainless steel, and alloy piping systems is preferred.<br></li><li>Good knowledge of site safety practices and industrial work procedures.<br></li><li>Immediate joiners preferred.<br></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 222857 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-09-03</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 231924 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-20</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 231865 <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Engineering <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-10</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<strong>Key Responsibilities</strong> <p></p> <p> Carry out preventive and corrective maintenance on mechanical equipment.</p> <p> Inspect, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> Maintain RO plant equipment including: High-pressure pumps</p> <p>1. Booster pumps</p> <p>2. Pressure vessels</p> <p>3. RO skids and membranes</p> <p>4. Filters and strainers</p> <p>5. Chemical dosing systems</p> <p>6. Valves and actuators</p> <p>7. Heat exchangers</p> <p>8. Cranes and lifting equipment</p> <p> </p> <p> Perform equipment alignment, lubrication, and condition monitoring.</p> <p> Participate in commissioning, startup, and shutdown activities.</p> <p> Assist in root-cause analysis of equipment failures.</p> <p> Complete maintenance reports and update CMMS/work orders.</p> <p> Coordinate with operations, electrical, and instrumentation teams.</p> <p> Follow permit-to-work procedures and HSE requirements.</p> <p> Respond to emergency breakdowns and plant call-outs when required.</p> <p> </p> <p> <strong>Required Qualifications</strong> </p> <p> Diploma or Technical Certificate in Mechanical Engineering or Mechanical Maintenance.</p> <p> 3 5 years (or more) experience in desalination, water treatment, power plants, oil &amp; gas, or industrial facilities.</p> <p> Experience with RO desalination systems is preferred.</p> <p> Knowledge of rotating and static equipment maintenance.</p> <p> Ability to read mechanical drawings, P&amp;IDs, and technical manuals.</p> <p> Familiarity with maintenance management systems (CMMS).</p> <p> </p> <p> <strong>Mechanical Technician's Key skills:</strong> </p> <p>1. Hands-on experience in mechanical maintenance activities, including equipment overhauling, bearing and mechanical seal replacement.</p> <p>2. Experience working with centrifugal, vertical, submersible, and dosing pumps.</p> <p>3. Hands-on experience in the assembly and disassembly of plug valves, butterfly valves, and check valves.</p> <p>4. Knowledge of laser alignment, dial gauge measurements, and CMMS (Computerized Maintenance Management System) software.</p> <p>5. Knowledge of pump vibration analysis and predictive maintenance techniques, with hands-on experience in the assembly and disassembly of compressors and motors.</p> <p>6. Working experience with PVDF and CPVC materials.</p> <p>7. Experience in RO (Reverse Osmosis) systems is optional but will be considered an added advantage.</p> <p> </p> <p> <strong>Commissioning Experience</strong> </p> <p>Inspect, commissioning, troubleshoot, repair, and overhaul pumps, motors, valves, gearboxes, compressors, and piping systems.</p> <p> <strong>Inspection:</strong> <strong> </strong>Experienced in inspecting mechanical equipment and piping systems for proper installation, alignment, connections, and readiness for commissioning.</p> <p> <strong>Commissioning:</strong> <strong> </strong>Hands-on experience in pre-commissioning and commissioning of pumps, motors, valves, gearboxes, compressors, and piping systems, including functional testing and start-up.</p> <p> <strong>Troubleshooting:</strong> <strong> </strong>Skilled in identifying and resolving mechanical issues such as vibration, leakage, overheating, misalignment, and performance problems.</p> <p> <strong>Repair &amp; Maintenance:</strong> <strong> </strong>Experienced in dismantling, repair, component replacement, reassembly, alignment, and functional testing of mechanical equipment.</p> <p> <strong>Overhauling:</strong> <strong> </strong>Capable of overhauling pumps, motors, gearboxes, compressors, and valves, including replacement of bearings, seals, and worn components.</p> <p> <strong>Piping Systems:</strong> <strong> </strong>Experienced in piping inspection and commissioning activities, including pressure testing, flushing, valve checks, and line-up verification.</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> General Information <br> <br> Ref # <br> 260000AH <br> <br> Location <br> Qatar-Doha <br> <br> Job family <br> Customer Service <br> <br> <ul><li><span>Closing Date:</span> <span>2026-08-18</span></li></ul><br> <br> <br> <br> <br> <br> </div>

<p>Electrical Engineer responsible for reviewing technical specifications, schematics, and automation documents, preparing protection diagrams, validating transformer applications, and ensuring system integration. The role also involves vendor/tender evaluation, client collaboration, factory acceptance testing, and supporting sales/margin optimization through engineering efficiency.</p><p>Your role</p><ul><li>Specification Study: Conduct detailed studies of project specifications to ensure alignment with client requirements and technical standards.</li><li>Control &amp; Protection Schematic Review: Review control and protection schematic drawings from partner units to ensure accuracy and functionality.</li><li>SAS Document Review: Analyze System Automation Schematics (SAS) documents, including Functional Design Specifications, SAS Architecture, GTP, and BOQ.</li><li>Substation Equipment Review: Evaluate primary and secondary substation switchgear/equipment schematics, focusing on coordination with protection schematics.</li><li>Protection SLD Preparation: Prepare Single Line Diagrams (SLD) for protection systems, ensuring compliance with client specifications.</li><li>CT/CVT/PT Application Checks: Perform application checks and calculations for Current Transformers (CT), Capacitor Voltage Transformers (CVT), and Potential Transformers (PT) with respect to protective relays and protection functions.</li><li>Cable Philosophy &amp; Interconnection Schedules: Develop and review cable philosophies and interconnection schedules to ensure system integration.</li><li>Tender &amp; Vendor Review: Review tender/vendor offers related to Control &amp; Relay (C&amp;R) panels to ensure technical compatibility and cost-efficiency.</li><li>Client Interaction: Collaborate with clients for the approval of engineering drawings and documents.</li><li>Sales &amp; Margin Optimization: Achieve sales targets and improve gross margins through effective engineering optimization.</li><li>Factory Acceptance Testing (FAT): Conduct Factory Acceptance Testing (FAT) for electrical equipment such as transformers, current transformers, and voltage transformers to ensure product quality and performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering or related field.</p><p>5+ years of experience in electrical engineering, particularly in protection systems and substation design.</p><p>Proficient in reviewing control and protection schematics and technical documents.</p><p>Knowledge of SAS systems, CT, CVT, PT applications, and relay protection functions.</p><p>Strong attention to detail and problem-solving skills.</p><p>Experience with client discussions and document approvals.</p><p>Experience in factory acceptance testing and vendor offer evaluation.</p><p>Ability to work collaboratively in a team and manage deadlines effectively.</p>

<ul><li>Operate and maintain work-class ROV systems during offshore operations.</li><li>Assist in pipeline inspection, subsea structure surveys, and asset integrity checks.</li><li>Support mobilization and demobilization of ROV equipment.</li><li>Perform routine maintenance, troubleshooting, and minor repairs on ROV systems.</li><li>Follow HSE guidelines and IMCA standards during all operations.</li><li>Prepare basic daily logs, inspection notes, and operational reports.</li><li>Coordinate with the ROV Supervisor and offshore team for daily tasks.</li><li>Monitor ROV performance and report any technical issues promptly.</li><li>Assist in spare parts inventory and equipment checks.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Familiarity with work-class ROV systems and subsea tooling.</li><li>Basic understanding of IMCA guidelines and offshore safety standards.</li><li>Good communication and teamwork skills.</li><li>Willingness to work offshore on rotational basis.</li></ul>

<p>To inspect, clean, maintain, and repair all mechanical and plumbing installations and systems. Maintains all lighting throughout hotel/retail. To maintain all HVAC units. To maintain all motor, belts, bearings, etc. To maintain all shop tools and equipment. To assist the Security Manager to maintain the Life Safety machinery and equipment, all mechanicals such as pumps and emergency diesel. Troubleshoot and repair all equipment that is non-operational. Do all necessary welding as required. Do all work orders pertain to the hotel. Assist other trades as required/retail Answer all calls and does repairs, if unable to do repairs, must notify the supervisor of the problem. Perform chemical test for boilers, chillers, swimming pool, etc. Operate BMS computer system. Is part of the fire response team, also on standby in the event of any emergencies. Does preventative maintenance as schedule by Engineering Office. Contact vendors and order necessary replacement/repair parts. Maintain adequate stock of parts/materials in the maintenance shop. Creatively resolve electrical/mechanical issues in order to keep the machinery operational. Computer skills (Word, Excel, Power Point) Ability to troubleshoot mechanical and electrical (PLC), make adjustments, and products changer-over, in a timely manner. To observe cleanliness at the place of work and on the job after completion of work. To ensure cleanliness of appearance and uniform, particularly when working in guest areas. To maintain the reading of water supply.</p><p><strong>Desired Candidate Profile</strong></p><p>Relevant building maintenance experience is an asset Strong interpersonal and problem solving abilities Highly responsible &amp; reliable</p>

<strong>Key Responsibilities</strong> <p></p> <p> </p> <p> <strong>Preventive &amp; Corrective Maintenance</strong> </p> <p>1. Perform routine preventive and predictive maintenance on field instruments.</p> <p>2. Troubleshoot instrumentation and control system failures.</p> <p>3. Repair and replace defective instruments and control components.</p> <p>4. Maintain calibration records and maintenance reports.</p> <p> <strong>Instrumentation Work</strong> </p> <p> Install, calibrate, and test:</p> <p>o Pressure transmitters</p> <p>o Flow meters</p> <p>o Level transmitters</p> <p>o Temperature instruments</p> <p>o Conductivity analyzers</p> <p>o pH analyzers</p> <p>o Chlorine analyzers</p> <p>o Turbidity analyzers</p> <p> Perform loop checking and signal verification.</p> <p> <strong>Control &amp; Automation Systems</strong> </p> <p> Maintain and troubleshoot PLC, RTU, HMI, SCADA, DCS, and control panels.</p> <p> Assist in commissioning and startup activities.</p> <p> Support control valve testing, tuning, and maintenance.</p> <p> Diagnose communication and network-related control issues.</p> <p> <strong>Qualification Requirements</strong> </p> <p> Diploma or Technical Certificate in:</p> <p>o Instrumentation Engineering</p> <p>o Electronics Engineering</p> <p>o Electrical Engineering</p> <p>o Automation Technology</p> <ul> <li> <p>Additional certifications in PLC/SCADA or instrumentation are advantageous.</p> </li> </ul> <p> <strong>I&amp;C Technician's Key Skills:</strong> </p> <p>1. Knowledge of PROFIBUS communication protocols and troubleshooting</p> <p>techniques.</p> <p>2. Experience with PROFIBUS-based process instrumentation, including pressure</p> <p>transmitters, level transmitters, differential pressure transmitters, and</p> <p>electromagnetic flowmeters (EMF).</p> <p>3. Knowledge of Festo panels, Siemens PLCs, and Yokogawa CENTUM VP DCS.</p> <p>4. Hands-on experience with diagnostic and calibration tools, including ProfiTrace</p> <p>devices, pressure calibrators, and deadweight testers.</p> <p>5. Working experience with analyzer instrumentation, such as chlorine, pH, ORP,</p> <p>hardness, and conductivity analyzers. Ability to read and interpret control wiring</p> <p>diagrams, I/O lists, and P&amp;IDs (Piping and Instrumentation Diagrams).</p> <p>6. Experience in RO (Reverse Osmosis) systems is optional but will be considered an</p> <p>added advantage.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Here's the Tube Fitter post formatted for Bayt's actual fields — just copy-paste each block in:</p><p><b>Job description</b> <i>(paste into the Job description box)</i></p><p>Elite Green is seeking an experienced Tube Fitter to join our EPC project team for instrumentation and process tubing works on oil &amp; gas projects. The successful candidate will be responsible for fabricating, installing, and terminating instrument tubing systems in accordance with P&amp;IDs, isometric drawings, and project specifications.</p><p>Key responsibilities:</p><ul><li>Fabricate, bend, and install stainless steel/carbon steel instrument tubing per isometric drawings and hook-up diagrams</li><li>Terminate tubing using compression fittings (Swagelok/Parker type) to correct torque specifications</li><li>Install tubing for pressure, flow, level, and temperature instrumentation, impulse lines, and pneumatic/hydraulic systems</li><li>Read and interpret P&amp;IDs, loop drawings, hook-up drawings, and instrument datasheets</li><li>Perform tube routing, tray/support installation, and cable/tube tray dressing as required</li><li>Conduct pressure/leak testing of completed tubing systems</li><li>Coordinate with instrument technicians and QC/QA for inspection, testing, and punch list closeout</li><li>Ensure work complies with project HSE procedures, especially for hot work, confined space, and working at height</li><li>Maintain accurate records of materials used, tubing runs completed, and test results</li></ul><p>Working hours: Sunday–Thursday, 9 AM–6 PM (site schedule may vary per project requirements)</p><p>Benefits: Accommodation, transportation, and site allowances (as applicable)</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Minimum 3–5 years' experience as a Tube Fitter in Oil &amp; Gas / EPC / Petrochemical projects</p><p>Proficient in tube bending (manual and hydraulic benders)</p><p>Skilled in compression fitting installation (Swagelok/Parker systems)</p><p>Strong knowledge of instrument hook-up drawings, P&amp;IDs, and isometrics</p><p>Experience with pressure testing and leak testing procedures</p><p>Ability to work at height, in confined spaces, and on rotational/shift schedules</p><p>Strong HSE awareness; safety passport/site induction certification preferred</p><p>Valid Qatar driving license preferred</p></div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Job Description: JOB PURPOSE / OBJECTIVE Understand, evaluate, and maintain various types of Instrumentation related data for the facility through SPI INTools. KEY ACCOUNTABILITIES Facility changes and modifications. • Ensure that instrumentation related deliverables are updated in SPI INTools as part of the facility change process within a stipulated timeframe and per company. Process Safety Information Policy and Management of Change (MOC) requirements. • Timely updating of PSI Instrumentation deliverables like Instrument Index, Specification sheets, Junction Box & Panel Wiring drawings, Interconnection diagrams, Loop drawings, Alarm & Trip Set Controller summary, I/O assignments etc. • Verify the changes on Instrumentation data as part of the facility change and integration including field verification as and when required. • Responsible to provide updated SPI INTools related information for the ongoing facility Project Engineering, operation, and maintenance. • Create and maintain new instrumentation data into SPI INTools as part of facility engineering requirements. • Issuance and maintenance of entire instrument tags in the plant through INTools without having any duplication. Administration of SPI INTools database • Work closely with IT & SPI INTools Contractor for the SPI System administration for data initialization, data backup, data security, and data recovery and SPI INTools periodic upgrade. • Provide support for bulk data extraction, data retrieval, various SPI INTools Report functionalities, management of users, groups, domains, user profiles, user training, software license renewal, etc. Quality, Health, Security, Safety and Environment • Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across Instrument and Electrical Section to guarantee employee safety and delivery of high-quality products/services. Reporting • Contribute to the preparation of timely and accurate reports to meet departmental requirements, policies, and standards. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Instrumentation Engineering. • Preferred: Bachelor’s Degree in Instrumentation Engineering. Experience • Required: 3-5 years of experience in the O&G Industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Hands-on experience in using SPI INTools Languages • Required: English - Proficient. • Preferred: Arabic - Working knowledge. WORKING RELATIONSHIPS Internal • Operations and Technical • Base load technicians External • Contractors and third-party service providers • Consultants and advisors</p>

<p><b>Responsibilities:&nbsp;</b></p><p><br></p><p>To inspect, clean, maintain, and repair all mechanical and plumbing installations and systems. Maintains all lighting throughout hotel/retail. To maintain all HVAC units. To maintain all motor, belts, bearings, etc. To maintain all shop tools and equipment. To assist the Security Manager to maintain the Life Safety machinery and equipment, all mechanicals such as pumps and emergency diesel. Troubleshoot and repair all equipment that is non-operational. Do all necessary welding as required. Do all work orders pertain to the hotel. Assist other trades as required/retail Answer all calls and does repairs, if unable to do repairs, must notify the supervisor of the problem. Perform chemical test for boilers, chillers, swimming pool, etc. Operate BMS computer system. Is part of the fire response team, also on standby in the event of any emergencies. Does preventative maintenance as schedule by Engineering Office. Contact vendors and order necessary replacement/repair parts. Maintain adequate stock of parts/materials in the maintenance shop. Creatively resolve electrical/mechanical issues in order to keep the machinery operational. Computer skills (Word, Excel, Power Point) Ability to troubleshoot mechanical and electrical (PLC), make adjustments, and products changer-over, in a timely manner. To observe cleanliness at the place of work and on the job after completion of work. To ensure cleanliness of appearance and uniform, particularly when working in guest areas. To maintain the reading of water supply.</p><p><strong>Desired Candidate Profile</strong></p><p>Your experience and skills include: Relevant building maintenance experience is an asset Strong interpersonal and problem solving abilities Highly responsible &amp; reliable</p>

Key Responsibilities:Technical Documentation: Write, check, and validate digital documentation and Standard Operating Procedures in accordance with project and company policies using professional editing tools. Administer the Content Management System to ensure a single source of accurate information is available digitally to all maintenance staff. System Integration: Utilize systems such as SAP, Cormap, Share Point, and others to source information and configure the documentation system for optimum creation, approval, distribution, and publication. Health, Safety & Environment (HSE): Assist the Program Manager in implementing safe systems and controls within your area of responsibility. Understand, implement, and comply with company HSQE policies, and fully participate in the behavioral safety agenda. Compliance: Ensure all data and information within the local documentation system is updated and approved in compliance with local procedures and the company's compliance policies and reporting ethos. Engineering Liaison: Work closely with Maintenance Engineers, Technical Managers, and Engineering Services to facilitate successful and timely approvals. Continuous Improvement & Quality: Continuously develop departmental processes and manage relationships with internal and external suppliers to position the company as an industry leader in train maintenance integrity. Requirements Experience with Digital Maintenance Management Systems. Proven experience delivering technical documentation in a heavy industry environment (Rolling Stock maintenance highly preferred). Proficiency in Microsoft software (Word, Excel, and Power Point). Effective organizational and time management skills. Excellent communication and interpersonal skills

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive and corrective maintenance (breakdown &amp; emergency), and rectification to all electrical systems and equipment inside the plants, buildings.</p><p>Troubleshoot, check and maintain the existing power systems and electrical installations for all kinds of equipment and provide the complete installation of new systems, whenever required.</p><p>Troubleshoot, maintain and diagnose (electrical equipment but no limited to) SWGR, MCC, VFD,MOTORS, ATS, Electrical Parts of the YK Chillers and the Electrical Distribution Panels</p><p>Execute and install the Cable Pulling, Wiring terminations, Cable Trunking, Cable Ducts, Panel Boards, Electrical Distribution Panels, Manual Station and other Electrical System.</p><p>Test and troubleshoot the Electrical Connections, the Electrical Equipment and their Controls after completing the preventive maintenance jobs.</p><p>Provide technical solutions and maintenance for all electrical system installed within QC Buildings,</p><p>Troubleshoot, maintain and diagnose the Motorized Valves, HVAC Systems, Generating Set, Synchronization Panels, Fire Fighting Systems, Motors Lighting, ELCB Systems, Gantry &amp; Over Head Cranes.</p><p>Generate technical layouts and technical reports.</p><p>Understand and implement the basis of the Computer Maintenance Management Systems</p><p>Perform thermo graphic and analysis for the electrical equipment.</p><p>Provide assistance and guidance to other technical teams, whenever required</p><p>Comply with the ISO 9001: 2015 QMS requirements in applicable job areas / functions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

Primary Purpose Of The Job<br><br>Carry out highly skilled maintenance, repair and overhaul of Rotary equipment and Minor/routine maintenance of static equipment installed at Qatar Energy Refinery process units i.e. Refinery 1 & 2, RFCC, Condensate Refinery, Utilities/Off sites, Tank Farm, Berth#6, BSV3 and Station C1 at Hamad Intl. Airport (HIA).<br><br>Required Experience And Skills<br><br>Minimum of level 5 in English communication skills (oral/written). Extensive knowledge of Mechanical Rotary equipment. Ability to work in a multinational environment. Minimum of 8 years experience in Refinery/Oil& Gas/Petrochemical plants. Must have experience in Pumps (Single & Multistage), Steam/Gas Turbines, centrifugal & Reciprocating Compressors, Turbo machinery etc. Capable of using computer for creating permits in RIS, preferably having knowledge & experience of using SAP & MS Office (Word & Excel)<br><br>Educational Qualifications<br><br>Qualified with a Diploma/Certificate in Mechanical Technology from a recognized institution.