Embedded Systems Engineer Jobs in Qatar

<p>Be fully aware of the HSE requirements</p><p>Ensure that all activities and works in responsibility are done in full compliance with the HSE requirements of COMPANY and the relevant Authorities</p><p>Directs and provide close onsite supervision of all jobs being performed by the contractors in the assigned area within facilities.</p><p>Ensure implementation of the Contract requirements in area of responsibility and report any deviation through the line responsible</p><p>Actively contribute to safety walks, reporting of accidents and investigation of accidents</p><p>Ensure that the works are being done in accordance with the Quality requirements</p><p>Supervise the site Civil maintenance activities and assist the Structural Engineer in the same</p><p>Assist the Structural Engineer in reviewing and approving Work Method Statements</p><p>Follow up site civil maintenance activities to confirm compliance with Work Method Statements and Construction Drawings</p><p>Provides accurate maintenance history and closeout reports; maintains a log of all completed / ongoing work as per company requirements.</p><p>Follow up Contractor and Subcontractors during execution to assure the quality and safety aspects of the work.</p><p>Follow up Contractor and Subcontractors about interpretation and proper implementation of the technical content of the Contract documents</p><p>Supports other disciplines related to civil works.</p><p>Attend site inspections and verify correctness of the same</p><p>Ability to understand technical &amp; maintenance problems and develop a structured work pack, plan, and execution</p><p>Good knowledge in concrete rehabilitation works, maintenance of marine structures including Jetties and civil maintenance works in process plant.</p><p>Recognition of defects &amp; anomalies which represent a serious threat to safety/integrity of structures and timely/appropriate communication, notification to Company engineers, line management as appropriate.</p><p>Identify, report, and follow up risks within own area of responsibility</p><p>Review, evaluation and interpretation of inspection findings, defects, and repairs.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Higher Secondary School (12 years)</li><li>Diploma (2 years)</li><li>Advanced Diploma/Equivalent (3 years)</li><li>10 to 15 years of Experience</li><li>Advanced Diploma/ Bachelor's Degree in relevant discipline from a recognized University</li><li>5+ years direct and relevant experience related to Civil discipline in oil/gas or petrochemical or fertilizer industry, with at least 3 years in a supervisor role</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Be fully aware of the HSE requirements</li> <li>Ensure that all activities and works in responsibility are done in full compliance with the HSE requirements of COMPANY and the relevant Authorities</li> <li>Directs and provide close onsite supervision of all jobs being performed by the contractors in the assigned area within facilities.</li> <li>Ensure implementation of the Contract requirements in area of responsibility and report any deviation through the line responsible</li> <li>Actively contribute to safety walks, reporting of accidents and investigation of accidents</li> <li>Ensure that the works are being done in accordance with the Quality requirements</li> <li>Supervise the site Civil maintenance activities and assist the Structural Engineer in the same</li> <li>Assist the Structural Engineer in reviewing and approving Work Method Statements</li> <li>Follow up site civil maintenance activities to confirm compliance with Work Method Statements and Construction Drawings</li> <li>Provides accurate maintenance history and closeout reports; maintains a log of all completed / ongoing work as per company requirements.</li> <li>Follow up Contractor and Subcontractors during execution to assure the quality and safety aspects of the work.</li> <li>Follow up Contractor and Subcontractors about interpretation and proper implementation of the technical content of the Contract documents</li> <li>Supports other disciplines related to civil works.</li> <li>Attend site inspections and verify correctness of the same</li> <li>Ability to understand technical &amp; maintenance problems and develop a structured work pack, plan, and execution</li> <li>Good knowledge in concrete rehabilitation works, maintenance of marine structures including Jetties and civil maintenance works in process plant.</li> <li>Recognition of defects &amp; anomalies which represent a serious threat to safety/integrity of structures and timely/appropriate communication, notification to Company engineers, line management as appropriate.</li> <li>Identify, report, and follow up risks within own area of responsibility</li> <li>Review, evaluation and interpretation of inspection findings, defects, and repairs.</li> </ul><br><ul> <li>Higher Secondary School (12 years)</li> <li>Diploma (2 years)</li> <li>Advanced Diploma/Equivalent (3 years)</li> <li>10 to 15 years of Experience</li> <li>Advanced Diploma/ Bachelor's Degree in relevant discipline from a recognized University</li> <li>5+ years direct and relevant experience related to Civil discipline in oil/gas or petrochemical or fertilizer industry, with at least 3 years in a supervisor role</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Monthly Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>9 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>3/31/2031, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>The Procurement Engineer Civil is responsible for managing the procurement of civil construction materials, equipment, subcontracted works, and related services required for construction projects. The position will ensure that all materials and services are procured in accordance with approved project specifications, drawings, BOQs, quality requirements, budgets, and construction schedules, while achieving competitive commercial terms and timely delivery. The Procurement Engineer will coordinate closely with Project Managers, Construction Managers, Civil Engineers, Quantity Surveyors, QA/QC, Planning, Commercial, Finance, Stores, and suppliers/subcontractors.</p><p>Controlling &amp; Coordinating with the Project Submittits, Procurement/ Contracts, Production, Logistics &amp; Despatch division throughout the various stages of the project to align with project schedule.</p><p>Identify suitable bidders after referring to the project approved vendors for various supplies and services.</p><p>Follows up with bidders and vendors to receive full technical details for the services/materials that has been requested and ensure that all commercial exceptions are properly clarified to ensure that no commercial exposure to the company can take place after placing of purchase order.</p><p>Prepares commercial evaluations for all received offers in a tabulated format that allows for a clear comparison between different offers.</p><p>Negotiate and finalize the best deal by issuing Purchase order/Sub-Contract based on criteria such as cost analysis, Lead time and payment terms and complies all the standard documentation to facilitate the procurement process.</p><p>Arrange and attend regular meetings with concerned department to update them regarding the project procurement schedules and status of procured materials. Thereby; analyse the criticality of materials and clearly tracking by proper deadlines for the procurement of materials and services depending on operational demands.</p><p>Responsible for commercial evaluations, expedition and payment follow-ups.</p><p>Manage the complete procurement cycle for civil construction materials and services.</p><p>Review Purchase Requisitions (PRs), BOQs, specifications, drawings and material requirements.</p><p>Source suitable suppliers, manufacturers and subcontractors.</p><p>Prepare and issue RFQs/RFPs.</p><p>Obtain and evaluate competitive quotations.</p><p>Prepare Technical &amp; Commercial Comparison Sheets.</p><p>Negotiate prices, payment terms, delivery schedules, warranties and commercial conditions.</p><p>Prepare and process Purchase Orders in accordance with company procedures.</p><p>Follow up on orders from placement through delivery to site.</p><p>Ensure materials are available in accordance with the project construction programme.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor of Engineering</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical design and engineering services in Civil/Structural Engineering (Offshore) for all assigned engineering projects.</li> <li>Achieving the technical quality of work in accordance with procedures, whilst considering quality, schedule, cost and HSE.</li> <li>Conduct Civil/Structural Engineering (Offshore) Engineering activities and in-house site surveys for projects, from initial concept definition phase through to; engineering studies, FEED, detailed design and commissioning.</li> <li>Ensure the required technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in work-scopes and whilst conducting Civil / Structural Engineering (Offshore) Engineering activities.</li> <li>Review technical deviations and variations to approved guidelines, codes, standards and practices.</li> <li>Support Engineering Department to review, update and apply standards and amendments to external standards.</li> <li>Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements.</li> <li>Co-ordinate engineering designs, develop and review multi-disciplinary work-scopes for projects and other engineering activities. Ensure that the work-scope is comprehensive and clear.</li> <li>Review and approve method statements developed by contracted organizations for scope compliance. Liaise with contracted organizations to resolve technical issues.</li> <li>Develop, update and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery.</li> <li>Conduct evaluation of technical bid packages for scope compliance.</li> <li>Review and evaluate the Contract Changes/Variation to approved guidelines and practices.</li> <li>Support the development of personal technical competency and skills and those of Coworkers.</li> <li>Participate in structured training for Associate Qatari Engineers.</li> </ul><br><ul> <li>Bachelor's degree in Civil or Structural Engineering.</li> <li>Chartered Engineer / Professional Engineer status or equivalent is preferable.</li> <li>10 years relevant post graduate experience, of which 6 years should be related to the Oil &amp; Gas industry.</li> <li>Ability to identify and utilize relevant engineering standards and Codes related to Civil/Structural Engineering (Offshore) Engineering.</li> <li>Proven ability to manage time, cost and quality in engineering projects within a multiple project environment.</li> <li>Good communications and presentation skills with fluency in English.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Provide technical design and engineering services in Materials &amp; Corrosion Engineering for all assigned engineering projects.</li> <li>Achieving the technical quality of work in accordance with Company procedures, whilst considering quality, schedule, cost and HSE.</li> </ul><br><ul> <li>Conduct Materials &amp; Corrosion Engineering activities and in-house site surveys for projects, from initial concept definition phase through to; engineering studies, FEED, detailed design and commissioning.</li> <li>Ensure the required Company technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed, in work-scopes and whilst conducting Materials &amp; Corrosion Engineering activities.</li> <li>Review technical deviations and variations to approved guidelines, codes, standards and practices.</li> <li>Support Engineering Department to review, update and apply Company standards and Company's amendments to external standards.</li> <li>Plan and co-ordinate activities of a team of multidiscipline engineers for providing timely delivery of technical services to meet the project requirements.</li> <li>Co-ordinate engineering designs, develop and review multi-disciplinary workscopes for projects and other engineering activities.</li> <li>Ensure that the work-scope is comprehensive and clear.</li> <li>Review and approve method statements developed by contracted organizations for scope compliance.</li> <li>Liaise with contracted organizations to resolve technical issues.</li> <li>Develop, update and monitor schedules for in-house engineering activities, contribute to external FEED/EPIC scheduling activities and effective project delivery.</li> <li>Conduct evaluation of technical bid packages for scope compliance.</li> <li>Review and evaluate the Contract Changes/Variation to approved guidelines and practices.</li> <li>Support the development of personal technical competency and skills and those of Coworkers.</li> <li>Participate in structured training for Associate Qatari Engineers Contribute towards updating HSE Codes, Standards, Specifications, and Philosophies.</li> </ul><br><ul> <li>Bachelor's degree in Mechanical or Metallurgical Engineering</li> <li>Chartered Engineer/ Professional Engineer status or equivalent is preferable.</li> <li>10 years relevant post graduate experience, of which 6 years should be related to the Oil &amp; Gas industry.</li> <li>Ability to identify and utilize relevant engineering standards and Codes related to Materials &amp; Corrosion Engineering.</li> <li>Proven ability to manage time, cost and quality in engineering projects within a multiple project environment.</li> <li>Good communications and presentation skills with fluency in English.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p><strong>Primary Purpose of the Job</strong></p><p>Manage and conduct marine inspections and audits on vessels contracted or operating within QatarEnergy's areas to ensure compliance with international, regional, local, and contractual standards. Oversee Port State Control inspections, OVID audits, and DP trials to safeguard operational integrity, prevent substandard vessels from operating, and uphold safety, environmental, and regulatory requirements.</p><p><strong>Required Experience and Skills</strong></p><p>Fully familiar with movement of floating units and all aspects of marine operations connected with the offshore industry including PSV, AHTS, offshore construction vessels, Heavy Lift Vessels/Barges/JUB/Diving &amp; ROV vessels, rig moving, support operations, and marine investigation. Considerable knowledge of seaport rules, regulations, policies, and procedures pertaining to vessel movements, port and cargo operation activities, and offshore operations with a good working knowledge of regulations for the Offshore Industry. Strong knowledge of class rules, flag state requirements, IMO/IACS standards, and offshore marine regulations. Conduct inspections of marine units and follow up audits and surveys to ensure compliance with industry standards and company contract requirements. Ability to write technical documents, reports, Memo, presentations, and review such documents effectively. Develop, review, and maintain company marine standards and procedures. Assess the competency and qualifications of vessel crew key personnel assigned to contracted vessels. Participate in workshops &amp; meetings as a key department representative. Implement HSE policies and encourage a safe HSE culture. Excellent problem-solving and organizational skills and ability to manage priorities. Excellent written and verbal communication skills in English. Proficient in MS Office applications.</p><p><strong>Educational Qualifications</strong></p><p>STCW Chief Engineer Certificate of Competency (STCW III/2) with minimum 10 years' relevant experience in Offshore/Oil &amp; Gas operations, including 3 years as Chief Engineer on offshore vessels and marine operations. Preferable experience on Dynamic Positioning vessels (DP2, DP3 Class) with significant sailing experience on more than one of the following: Offshore Supply Vessels, AHTS, ASD Tug, rig move/towing, Jack-up barge, or subsea vessels. OCIMF Accredited OVID Inspector or adequate experience to support accreditation. Background in Marine Surveying, vessel chartering inspections, Marine Quality Assessment Auditing, Port State Control, OVID, and Accident Investigation.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements &amp; Summary</strong></p><ul><li>Skills : Marine Surveying</li><li>Experience : 2 + Years</li><li>Education : High School/Secondary</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position:</p><p>Control and Instrumentation Technician - (1)</p><p>Date Open:</p><p>Feb 19, 2026</p><p>Closing Date:</p><p>May 31, 2026</p><p>Principal:</p><p>Qatar District Cooling Company</p><p>Country:</p><p>Doha, Qatar</p><p>Qualifications:</p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>&nbsp; Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS’s and PDN’s.</p><p>&nbsp; Check and maintain existing wiring installations for all Low Current System and Control System equipment.</p><p>&nbsp; Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</p><p>&nbsp; Provide tuning for controls and equipment.</p><p>&nbsp; Test equipment and controls after maintenance has been done.</p><p>&nbsp; Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</p><p>&nbsp; Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</p><p>&nbsp; Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool’s standards.</p><p>&nbsp; May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li><li>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s.</li><li>Check and maintain existing wiring installations for all Low Current System and Control System equipment.</li><li>Provide troubleshooting for the control panels, power sources and ensure wiring tightness.</li><li>Provide tuning for controls and equipment.</li><li>Test equipment and controls after maintenance has been done.</li><li>Test, calibrate, maintain and repair instruments and equipment to conform to established standards.</li><li>Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service</li><li>Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards.</li><li>May provide assistance to control engineer in design/drawings of modifications.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide preventive and corrective technical maintenance and solutions to all Low Current System and Control System components and equipment within the plants, buildings, ETS s and PDN s. Check and maintain existing wiring installations for all Low Current System and Control System equipment. Provide troubleshooting for the control panels, power sources and ensure wiring tightness. Provide tuning for controls and equipment. Test equipment and controls after maintenance has been done. Test, calibrate, maintain and repair instruments and equipment to conform to established standards. Responsible to keep abreast with knowledge and skills in case of instrument and equipment upgrade/replacement in order to maintain expected level of service Install, repair and maintain equipment related to Low Current System and Control System, in order to maintain Qatar Cool s standards. May provide assistance to control engineer in design/drawings of modifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>The job requires Male applicants.</li><li>Minimum of 5 years working experience is required for this position</li></ul><p></p></section>

Mid/Senior Solution Architect – Qatar<br>A fantastic opportunity for a skilled Solution Architect do join a global AI/Deep Tech company, as part of their expansion into the Middle East.<br>In this role you will join our pre-sales team and bridge the gap between our technology and our customers’ needs, crafting innovative, scalable, and robust AI- powered solutions.<br>***Applicants must have legal authorization to work in Qatar***<br>Requirements:Bachelor's or Master's degree in Computer Science, Data Science, Engineering, or related field Previous experience in a technical partner pre-sales or consulting role with a heavy emphasis on partner and customer-facing interactions (i.e. Solutions Architect, Sales Engineer, Implementation Consultant) Excellent communication and presentation skills, able to interface effectively with technical and non-technical stakeholders; experience writing technical proposals or responding to RFPs/tenders; experience running hands-on product demos independently. Strong knowledge of cloud platforms (AWS, Azure, GCP) and AI/ML services (e.g., Sage Maker, Vertex AI, Azure ML), including sovereign, on-premise, and hybrid deployment models. Familiarity with MLOps tools and practices: CI/CD, monitoring, and orchestration frameworks (e.g., Kubeflow, Flyte, MLflow); proficiency with Docker and Kubernetes for AI workload containerization. Understanding of LLM inference stacks (v LLM, llama.cpp, Open VINO) and model delivery formats (ONNX, .safetensors, Hugging Face model hub). Experience sizing GPU infrastructure for LLM inference or training workloads (memory, throughput, hardware tiers from A10 to H200). Experience benchmarking and evaluating LLM performance (accuracy, latency, throughput). Hands-on coding skills in Python, SQL, and familiarity with ML libraries and frameworks (PyTorch, Tensor Flow, Hugging Face). Must be available to travel as needed for meetings, conferences, and project requirements. Languages: Arabic and English<br>Nice to Have:•Experience with Computer Vision models, Speech models, Vision-Language models, and other modalities.•Experience with AI model optimization, quantization, or deployment to edge devices.•Hands-on experience designing RAG pipelines and/or multi-agent systems..•Experience designing data architectures (batch & streaming) and working with big data technologies.•Knowledge of data privacy and ethical considerations in AI, including GDPR compliance and familiarity with the respective country AI Act.<br><br>By applying to this role you understand that we may collect your personal data and store and process it on our systems. For more information please see our Privacy Notice (https://eu-recruit.com/about-us/privacy-notice/)

<p>Witness and review Concrete Trial Mix Designs to verify compliance with project specifications, strength requirements, workability, durability, and performance criteria</p><p>Perform inspections of excavation, backfilling, compaction, foundations, concrete works, reinforcement installation, formwork, embedded items, anchor bolts, concrete placement, curing, and finishing activities</p><p>Inspect equipment foundations, machine foundations, transformer foundations, structural pedestals, and associated concrete works to ensure compliance with approved drawings and tolerances</p><p>Conduct inspection and testing of grouting works, including non-shrink grout installation beneath equipment bases, structural supports, and foundations</p><p>Inspect passive fireproofing works for structural steel and equipment supports, ensuring compliance with approved specifications and manufacturer requirements</p><p>Verify material receiving inspections, material sampling, testing, storage conditions, and compliance with approved Material Approval Requests (MAR) and project requirements</p><p>Witness field and laboratory testing activities, including soil compaction tests, field density tests, concrete slump tests, compressive strength tests, aggregate testing, asphalt testing, and other required quality tests</p><p>Conduct inspections of road works, including subgrade preparation, sub-base, road base, prime coat, tack coat, asphalt paving, compaction, thickness verification, level surveys, and pavement testing</p><p>Perform inspections of building construction activities, including blockwork, masonry, plastering, waterproofing, screeding, flooring, ceiling installation, architectural finishes, and building painting works</p><p>Inspect pipeline trench excavation, trench preparation, bedding installation, pipe lowering activities, initial backfilling, padding, post-padding, and final backfilling works</p><p>Conduct Right-of-Way (ROW) inspections to verify compliance with alignment, grading, environmental requirements, and project specifications</p><p>Inspect pipeline crossings, including road crossings, utility crossings, railway crossings, wadi crossings, and associated protection systems</p><p>Perform inspections of culverts, drainage systems, retaining structures, channels, and related civil infrastructure works</p><p>Inspect construction of pipeline bund walls, storage tank dyke walls, containment systems, and associated concrete and earthworks</p><p>Conduct inspection and verification of GRE (Glass Reinforced Epoxy) piping installation, leak testing activities</p><p>Perform inspections of HDPE piping installation, welding activities, visual inspection, pressure testing, and commissioning requirements</p><p>Inspect structural steel fabrication and erection activities, including alignment, leveling, bolt tightening, welding, and installation tolerances</p><p>Review material delivery documents, mill certificates, test reports, calibration certificates, and inspection records to ensure compliance with project requirements</p><p>Verify that approved materials are properly handled, stored, preserved, and utilized in accordance with project specifications</p><p>Coordinate with construction teams, engineering disciplines, clients, consultants, and contractors for inspection scheduling, hold points, witness points, and quality surveillance activities</p><p>Review and maintain inspection reports, quality records, surveillance reports, punch lists, and turnover dossiers in accordance with project quality requirements</p><p>Identify non-conformities, raise NCRs, quality observations, and corrective action requests, and monitor implementation through closure</p><p>Monitor contractor and subcontractor compliance with approved Quality Management Systems, Quality Plans, Procedures, and Project Specifications</p><p>Support implementation of Project Quality Management Systems and ensure compliance with applicable HSE requirements throughout all construction phases</p><p><strong>Desired Candidate Profile</strong></p><p>Civil/Structural/Architectural/Geological or equivalent degree and/or diploma with experience in quality Control in multi-discipline construction environment. Preferably having formal training in QC and membership with recognized or other professional institutions</p><p>Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in Quality Control Inspection of Civil, Structural, Architectural, and Pipeline construction activities, preferably within Oil &amp; Gas, Petrochemical, Industrial, Infrastructure, and EPC projects</p><p>Extensive experience in inspection, testing, and quality assurance of civil and pipeline construction works, including concrete works, road works, building construction, underground utilities, storage tanks, and related infrastructure</p><p>Proven expertise in Batch Plant Prequalification Audits, Concrete Trial Mix Design Witnessing, material approval processes, field inspection, and quality documentation.</p><p>Strong knowledge of international codes, standards, and specifications, including QCS, ACI, ASTM, AASHTO, API, ASME, BS, ISO, and project-specific requirements</p><p>Demonstrated capability to work effectively within multidisciplinary and multicultural environments, coordinating with clients, consultants, contractors, subcontractors, and third-party inspection agencies</p>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations.</p><p>Process Control and Instrumentation skills</p><p>Troubleshooting abilities</p><p>Calibration expertise</p><p>Experience in the manufacturing industry</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations.</p><p><strong>Desired Candidate Profile</strong></p><p>Process Control and Instrumentation skills Troubleshooting abilities Calibration expertise Experience in the manufacturing industry</p>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations.</p><p><strong>Desired Candidate Profile</strong></p><p>Process Control and Instrumentation skills<br>Troubleshooting abilities<br>Calibration expertise<br>Experience in the manufacturing industry</p>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations.</p><p><strong>Desired Candidate Profile</strong></p><p>Process Control and Instrumentation skills<br>Troubleshooting abilities<br>Calibration expertise<br>Experience in the manufacturing industry</p>

<p>Min. 03-05 years experience in Oil &amp; Gas or Industrial Plant, Knowledge in Cargo Carrying Unit (CCU) is an advantage, Knowledge and experience related to HVAC and Electrical.</p><p><strong>Desired Candidate Profile</strong></p><p>Preferred Electrical Engineer with QA/QC Experience</p>

<ul><li>Carry out preventive, corrective and breakdown maintenance of electrical systems and equipment.</li><li>Troubleshoot electrical faults and identify the root cause of failures.</li><li>Install, maintain and repair electrical wiring, lighting, switches, sockets, isolators and distribution systems.</li><li>Work on DBs, SMDBs, MCC panels, control panels, breakers, contactors, relays and related electrical components.</li><li>Troubleshoot and maintain electrical motors, pumps and associated control systems.</li><li>Carry out basic troubleshooting of VFDs, starters and motor control circuits.</li><li>Perform cable laying, cable termination, glanding and electrical connections.</li><li>Read and understand electrical drawings, wiring diagrams and single-line diagrams.</li><li>Conduct electrical testing and inspections using appropriate testing instruments.</li><li>Attend emergency electrical breakdown and maintenance call-outs when required.</li><li>Support electrical installation and modification works for MEP projects.</li><li>Coordinate with HVAC, plumbing and other technicians during MEP maintenance activities.</li><li>Prepare service reports and communicate site findings to the supervisor/engineer.</li><li>Maintain tools and equipment properly and report any damaged or missing tools.</li><li>Follow company procedures, site safety requirements, PTW and LOTO practices where applicable.</li><li>Maintain good housekeeping and ensure all work is completed safely and professionally.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>ITI / Diploma / Technical Certificate in Electrical Engineering or Electrical Trade.</li><li>2–5 years of relevant experience in electrical maintenance, MEP contracting or facilities maintenance.</li><li>Qatar/GCC experience will be an advantage.</li><li>Strong practical knowledge of LV electrical systems and MEP electrical maintenance.</li><li>Experience with DBs, MCCs, motors, pumps, lighting systems, breakers, contactors and control circuits.</li><li>Basic knowledge of VFDs and motor control systems.</li><li>Ability to read electrical drawings and wiring diagrams.</li><li>Good troubleshooting and problem-solving skills.</li><li>Ability to work independently and as part of a technical team.</li><li>Good communication and customer-handling skills.</li><li>Must be willing to attend emergency and after-hours maintenance calls when required.</li><li>Experience in MEP maintenance, building maintenance, commercial facilities, residential properties, HVAC electrical systems, pumps and general electrical contracting works preferred.</li><li>Reliable and punctual.</li><li>Professional appearance and attitude.</li><li>Safety-conscious.</li><li>Good workmanship.</li><li>Customer-friendly.</li><li>Willing to learn and take responsibility.</li><li>Able to work under pressure and meet service deadlines.</li></ul>

<ul><li>Carry out preventive, corrective and breakdown maintenance of electrical systems and equipment.</li><li>Troubleshoot electrical faults and identify the root cause of failures.</li><li>Install, maintain and repair electrical wiring, lighting, switches, sockets, isolators and distribution systems.</li><li>Work on DBs, SMDBs, MCC panels, control panels, breakers, contactors, relays and related electrical components.</li><li>Troubleshoot and maintain electrical motors, pumps and associated control systems.</li><li>Carry out basic troubleshooting of VFDs, starters and motor control circuits.</li><li>Perform cable laying, cable termination, glanding and electrical connections.</li><li>Read and understand electrical drawings, wiring diagrams and single-line diagrams.</li><li>Conduct electrical testing and inspections using appropriate testing instruments.</li><li>Attend emergency electrical breakdown and maintenance call-outs when required.</li><li>Support electrical installation and modification works for MEP projects.</li><li>Coordinate with HVAC, plumbing and other technicians during MEP maintenance activities.</li><li>Prepare service reports and communicate site findings to the supervisor/engineer.</li><li>Maintain tools and equipment properly and report any damaged or missing tools.</li><li>Follow company procedures, site safety requirements, PTW and LOTO practices where applicable.</li><li>Maintain good housekeeping and ensure all work is completed safely and professionally.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>ITI / Diploma / Technical Certificate in Electrical Engineering or Electrical Trade.</li><li>2–5 years of relevant experience in electrical maintenance, MEP contracting or facilities maintenance.</li><li>Qatar/GCC experience will be an advantage.</li><li>Strong practical knowledge of LV electrical systems and MEP electrical maintenance.</li><li>Experience with DBs, MCCs, motors, pumps, lighting systems, breakers, contactors and control circuits.</li><li>Basic knowledge of VFDs and motor control systems.</li><li>Ability to read electrical drawings and wiring diagrams.</li><li>Good troubleshooting and problem-solving skills.</li><li>Ability to work independently and as part of a technical team.</li><li>Good communication and customer-handling skills.</li><li>Must be willing to attend emergency and after-hours maintenance calls when required.</li><li>Experience in MEP maintenance, building maintenance, commercial facilities, residential properties, HVAC electrical systems, pumps and general electrical contracting works preferred.</li><li>Reliable and punctual.</li><li>Professional appearance and attitude.</li><li>Safety-conscious.</li><li>Good workmanship.</li><li>Customer-friendly.</li><li>Willing to learn and take responsibility.</li><li>Able to work under pressure and meet service deadlines.</li></ul>

<p>The Senior ELV Engineer will be responsible for the engineering, coordination, installation oversight, testing & commissioning, and handover of ELV systems for Data Centre projects. The role involves managing subcontractors, coordinating with clients, consultants, vendors, and SMEs, and ensuring successful project delivery in compliance with project specifications, client standards, and applicable codes.</p><p>Engineering & Design</p><ul><li><p>Prepare and review shop drawings, technical submittals, method statements, and system architecture drawings.</p></li><li><p>Coordinate interfaces between ELV, ICT, Security, Fire Alarm, Electrical, Mechanical, BMS, and EPMS systems.</p></li><li><p>Ensure compliance with project specifications, authority requirements, and industry standards.</p></li></ul><p>Construction & Project Delivery</p><ul><li><p>Supervise ELV subcontractors and monitor installation quality.</p></li><li><p>Resolve technical and interface issues during construction.</p></li><li><p>Support project planning, progress monitoring, and risk mitigation.</p></li></ul><p>Testing & Commissioning</p><ul><li><p>Lead testing, commissioning, and Integrated Systems Testing (IST) activities.</p></li><li><p>Conduct Cause & Effect testing and verify system functionality.</p></li><li><p>Ensure timely closure of commissioning comments, defects, and punch-list items.</p></li></ul><p>TOI & Handover</p><ul><li><p>Manage Technical Open Items (TOI) and coordinate responses with stakeholders.</p></li><li><p>Prepare O&M manuals, as-built drawings, test reports, and handover documentation.</p></li><li><p>Support operational readiness, training, and project closeout.</p></li></ul><p>Stakeholder Management</p><ul><li><p>Coordinate with clients, consultants, vendors, subcontractors, and commissioning teams.</p></li><li><p>Participate in technical meetings, workshops, and authority inspections.</p></li></ul><p>Systems Expertise</p><ul><li><p>CCTV, Access Control, Intrusion Detection, , Structured Cabling, ICT Infrastructure.</p></li><li><p>Fire Alarm, VESDA/HSSD, Linear Heat Detection, Fire & Gas Detection, FM-200, Novec 1230, Clean Agent Systems.</p></li><li><p>BMS, EPMS, CPMS, Leak Detection Systems, Critical Environment Monitoring, and Integrated Systems Testing.</p><p>Technical Knowledge</p><ul><li><p>NFPA 72, NFPA 75, NFPA 76, NFPA 101, NFPA 2001.</p></li><li><p>Local authority and fire code requirements</p></li><li><p>Data Centre commissioning, integrated testing, and operational readiness processes.</p></li></ul><p>Core Competencies</p><ul><li><p>Technical Leadership</p></li><li><p>Subcontractor Management</p></li><li><p>Commissioning & IST</p></li><li><p>Quality & Compliance</p></li><li><p>Stakeholder Coordination</p></li><li><p>Problem Solving</p></li><li><p>Technical Documentation</p></li><li><p>Communication & Teamwork</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications & Experience</p><ul><li><p>Bachelor's Degree in Electrical, Electronics, Instrumentation or related Engineering discipline.</p></li><li><p>Minimum 10 years of ELV experience with at least 3 years on Data Centre projects.</p></li><li><p>Strong experience in commissioning, IST, TOI closure, and project handover.</p></li><li><p>Experience working with a Main Contractor/General Contractor is preferred.</p><br><p>Preferred: Experience on Microsoft or hyperscale Data Centre projects.</p></li></ul>

<p>The Instrumentation Engineer will be responsible for process control, troubleshooting, electrical engineering, and calibration tasks related to the company's manufacturing operations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>BE Instrument</li><li>Process Control and Instrumentation skills</li><li>Troubleshooting abilities</li><li>Calibration expertise</li><li>Experience in the manufacturing industry</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are currently looking AI Engineer our Qatar operations.</p><p><br></p><p><br></p><p><span style="font-size: 11px;">Skills: Build AI use cases, connect models to business workflows, design AI architecture Domain: Banking Joining time frame: 2 weeks (maximum 1 month)</span></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>