Embedded Systems Engineer Jobs in Qatar

We are hiring for our Client: Senior Projects Engineer<br>The Senior Projects Engineer is responsible for planning, managing, and delivering all capital projects , including unit renovations, building developments, and capital improvement works. The role oversees the full project lifecycle, from design and tendering through construction and handover, ensuring projects are delivered on time, within budget, and to the required quality standards under the direct supervision and guidance of the Capital Projects Manager. The position plays a critical role in preserving asset value, supporting operational efficiency, and enabling growth.<br> Detailed Roles & Responsibilities:Project Planning & Capital Program Management:o Manage planning and execution of unit-level renovations to ensure fast turnaround of vacated units where required per PM team requirements an coordination and support of FM team.o Develop and manage the overall capital projects program aligned with THE CLIENT’s priorities.o Define project scopes, objectives, and deliverables in coordination with internal stakeholders.o Establish detailed project schedules, timelines, milestones, initial estimates, establish business case for all capital works.o Ensure project plans support operational requirements and minimize disruption to tenants. Design, Tendering & Procurement Management:o Manage the design development process, including coordination with consultants and technical teams.o Oversee and manage preparation of tender documents, BOQs, and technical specifications.o Manage the tendering process, including evaluation of bids and contractor selection.o Supervise the Contract Specialist in preparing and negotiating construction and renovation agreements.o Ensure procurement activities comply with THE CLIENT procurement policies and governance frameworks. Construction & Project Execution Oversight:o Oversee execution of construction, renovation, and capital improvement projects, new design and construction projects.o Monitor contractor performance to ensure adherence to project scope, quality, and timelines.o Conduct regular site inspections and progress reviews.o Ensure proper coordination between contractors, consultants, and internal stakeholders.o Address project risks, delays, or technical issues proactively. Cost Control & CAPEX Management:o Manage and control the Capital Expenditure (CAPEX) budget across all projects.o Monitor project costs and ensure alignment with approved budgets.o Review and recommend cost variations, change orders, and budget adjustments.o Implement cost control measures to prevent overruns and optimize project value.o Provide regular financial updates, project cost data and CAPEX reports. Quality Assurance & Asset Lifecycle Integration:o Ensure all project deliverables meet high-quality standards and technical specifications.o Minimize future maintenance issues through proper design and construction quality control.o Coordinate with the FM Manager to ensure projects align with long-term maintenance strategies.o Ensure proper handover of completed assets, including documentation and as-built records.o Support lifecycle planning by recommending improvements and upgrades to existing assets. Regulatory Approvals & Stakeholder Coordination:o Coordinate with government authorities and liaison officers to obtain required permits and approvals.o Ensure compliance with local building codes, regulations, and safety requirements.o Coordinate with internal departments such as FM, Property Management, Finance, and Legal as required for the execution of projects.o Manage communication with external stakeholders including consultants, contractors, and authorities.o Ensure all regulatory and statutory requirements are fulfilled throughout the project lifecycle. Skills:Technical / Functional Skills:o Project management, design management, construction management and site supervision.o Knowledge of real estate development including building materials, MEP and ELV systems, Architectural and Interior Fit Out and Finishes.o Contract management and procurement processes.o Cost control and budget management.o Risk management and project scheduling. Professional Skills:o Leadership and team coordination skills.o Strong problem-solving and decision-making ability.o Communication and stakeholder management.o Negotiation and contract management skills.o Ability to manage multiple projects simultaneously.<br>Education & Professional Certificates Education: Bachelor’s degree in engineering, Construction Management, Architecture, or Project Management. Certificates: Preferred Certifications include: Project Management Professional (PMP) desirable Membership of relevant international professional bodies desirable Computer Literacy: Computer literate. Proficiency in MS Office, Project management software (e.g., Primavera, MS Project), and reporting tools is preferred. Languages:English fluent. Arabic is preferred. Experience 10–12 years of experience in design engineering, construction and project management in real estate development projects. Minimum 5 years in a managerial role overseeing capital projects. Experience in residential, mixed-use, or large-scale real estate developments is required.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br>About Shifamed Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br>Description:<br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br>Responsibilities, Skills & Hands-On Experience:Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br>Education & Work Experience:Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

Akura Medical, a Shifamed portfolio company, is advancing a differentiated platform for the treatment of venous thromboembolism (VTE), which affects up to 900,000 Americans each year. The company recently received US IDE approval for its QUADRA-PE study evaluating the Katana™ Thrombectomy System in acute pulmonary embolism patients. In parallel, Akura Medical is developing Nav IQ™, a software platform that transforms CT angiograms into 3D pulmonary vascular models to enhance visualization, procedural planning, and clot assessment towards better safety, efficacy, and ease of use. Akura has recently completed a $53 million first close of its Series C financing, led by the Qatar Investment Authority, supporting the launch of a joint venture and a new R&D and manufacturing center in Doha, Qatar. To learn more about Akura Medical, please visit www.akuramed.com.<br><br>About Shifamed<br><br>Founded in 2009 by serial entrepreneur Amr Salahieh, Shifamed LLC is a privately held medical device innovation hub focused on the development of novel medical products to address clinical needs in the rapidly evolving fields of cardiology and ophthalmology.<br><br>Description:<br><br>This position represents an exciting opportunity to join the Akura team at an early stage where you will creatively design and develop components, both consumable and capital equipment, of a blood clot removal system. The role focuses on mechanical design of various components and assemblies for catheter systems, a console, and cross-functional leadership from concept through high volume manufacturing. You will be responsible for the design, vendor relationships and testing per applicable standards. This is a full-time, on-site position at our Doha, Qatar office.<br><br>Responsibilities, Skills & Hands-On Experience:<br><br>Lead design and development of plastic/composite and metallic parts from concept to high volume manufacturing; drive DFM/DFS, manufacturing and tooling decisions with suppliers. Drive the full mechanical lifecycle: requirements, concepts, prototyping, detailed design, V&V, and transition to production. Integrate mechanical designs with electronics, firmware, fluid, and user-interface elements in collaboration with cross-functional teams. Guide analysis (tolerance stacks, FEA, material selection, root-cause) on critical subsystems. Creative solutions and product designs to satisfy unmet clinical needs in thrombectomy. Be a primary contributor to the intellectual property position of the company via invention disclosures and prototypes to demonstrate reduction to practice. Interact with physicians to assist with product demonstrations and product testing. Effectively document work throughout the development process though design reviews, manufacturing instructions, test methods, and test reports. Expertise in design and development of medical devices. Expertise in electromechanical and mechanism design of durable medical devices. Substantial experience in design of higher volume disposable components. Substantial experience in design for molding and machining. Substantial experience in design for manufacturing. Pilot production experience. Expertise in product, tool and fixture design using Solid Works. Performance test apparatus and test method development. Process development on both a prototype and manufacturing level. Mentoring and assisting team members with less experience. Participating in lab and cleanroom environment builds. Process optimization and design of experiment based on statistical methodology. Selecting and managing suppliers, including understanding of capabilities, materials, and fabrication processes Working independently and in a project team setting. Supporting regulatory filings including writing technical sections and providing general technical input.<br><br><br>Education & Work Experience:<br><br>Bachelor's Degree or higher in Mechanical/Biomedical Engineering. At least 15 years of experience in complex product development, including regulated products. Advanced Solid Works proficiency. Demonstrated track record as a lead/principal engineer or product design of medical devices from concept through launch. Strong expertise in injection molding and RIM molding (part design, materials, DFM, cosmetic and structural considerations). Strong experience with medical devices under FDA/ISO 13485 or equivalent regulatory frameworks. Previous experience working with clinical testing, trials, data collection, and statistical analysis.<br><br><br>Our salary ranges are calculated by role, level, and location. Please note that your position within that range will be determined by your job-related knowledge, location, skills, experience, relevant education, and training/certifications.<br><br>NOTICE TO CANDIDATES: Please be aware that Shifamed and its portfolio companies do not conduct interviews or extend offers through mobile web chat applications. Please report any such occurrences to hr@shifamed.com.

2-4 years of experience in Onsite support ● Knowledge and experience on windows 7 OS ● Manage Desktop Devices (hardware, software and connectivity) incidents through to resolution. ● Manage IMAC and desk side support services. ● Manage hard and soft break fix services for laptops and desktops. ● Provide standard and approved hardware and software (operating systems and standard office applications) support and maintenance on Desktop (Field Users) Devices for their entire lifecycle (including the remote management of Desktop Devices using appropriate tools). ● Support, Manage, Optimize and Maintain the configuration and installation of the Desktop, to include, but not limited to, patch updates, hardware replacements, with spares provided by vendor. ● Experience with Service management tool – ex – Service now ● Should have good expertise on EUC tools, remote support tools, MS office and outlook. ● Preferable to have a good understanding of Lync, VPN, and mobile device support. ● Analyze Service Desk calls for Desktop Devices and incident data to identify and advice Customer of any potential user training requirement and automation. ● Ensure that each Desktop Device is installed with the appropriate Desktop image. ● Manage Desktop Devices (hardware and software) incidents through to resolution. ● Monitor security profiles and anti-virus software on all Desktop Devices and take appropriate action in the event of non-compliance with security requirements ● Provide VIP support for Desk side issues per contract and be point of contact at the site for all IT related issues if no other IT support team unavailable like for MI calls. ● Should be aware of ITIL process of Incident, Change, Problem, Service Request and related activities like spare and buffer stock management ● Good to have – knowledge in AD and smart hands and feet support. ● Good to have – knowledge and experience of supporting MAC devices

Job Summary We are seeking an experienced Senior ESB Developer with strong expertise in IBM App Connect Enterprise (ACE), IBM Integration Bus (IIB), IBM MQ, API integration, and enterprise middleware solutions. The ideal candidate will be responsible for designing, developing, deploying, and supporting enterprise integration solutions that enable seamless communication between business applications, databases, APIs, and external systems. The role requires extensive hands-on experience in IBM ACE, IBM MQ, REST/SOAP services, ESQL, message transformation, enterprise integration patterns, CI/CD, and API management while ensuring high availability, scalability, security, and performance of enterprise integration platforms. Key Responsibilities Enterprise Integration Development Design, develop, and maintain enterprise integration solutions using IBM App Connect Enterprise (ACE). Build scalable and reusable integration services. Develop message flows and integration components. Implement enterprise integration patterns. Develop secure, high-performance middleware solutions. API & Middleware Development Design and develop RESTful APIs. Develop SOAP Web Services. Integrate enterprise applications using IBM MQ. Develop synchronous and asynchronous integrations. Support API lifecycle management. Implement secure API integrations. System Analysis & Solution Design Analyze business and technical requirements. Translate business requirements into integration solutions. Design enterprise integration architecture. Develop reusable middleware components. Ensure alignment with enterprise architecture standards. Message Transformation Develop and support data transformation using:XMLJSONDFDLCSVMRMXMLNSCISO8583Perform:Message Mapping Schema Validation Data Transformation Data Routing IBM MQ Administration & Messaging Develop IBM MQ-based integrations. Configure reliable messaging. Implement asynchronous communication. Support message queues. Troubleshoot MQ-related issues. Optimize messaging performance. Testing & Quality Assurance Develop Unit Tests. Perform Integration Testing. Support System Integration Testing (SIT). Debug middleware issues. Validate API functionality. Ensure code quality and compliance. Use tools including:SOAPUIPostman CI/CD & Dev Ops Manage source code using Git. Support Jenkins CI/CD pipelines. Automate deployments. Support Dev Ops practices. Manage environment deployments across Development, QA, UAT, and Production. Production Support Monitor integration services. Investigate production incidents. Perform Root Cause Analysis (RCA). Resolve integration failures. Optimize middleware performance. Ensure high system availability. Documentation Prepare and maintain:Technical Design Documents Integration Specifications API Documentation Deployment Guides Operational Procedures Interface Documents System Architecture Documentation Collaboration Work closely with:Business Analysts Solution Architects Application Developers QA Engineers Infrastructure Teams Operations Teams Business Users Participate in Agile delivery. Support SDLC activities. Mentor junior developers and enforce development standards. Education Bachelor's Degree in:Computer Science Information Technology Computer Engineering Electronics & Communication Engineering Software Engineering Related Engineering Discipline Required Experience Minimum 8–10+ years of experience in enterprise integration development. Strong hands-on experience with IBM App Connect Enterprise (ACE). Experience with IBM Integration Bus (IIB) / Web Sphere Message Broker. Experience with IBM MQ. Experience in enterprise integration and middleware platforms. Experience working in Banking, Financial Services, Insurance, Logistics, or Enterprise environments is preferred. Mandatory Technical Skills Enterprise Integration IBM App Connect Enterprise (ACE) IBM Integration Bus (IIB) IBM Web Sphere Message Broker Enterprise Service Bus (ESB) Enterprise Integration Middleware Development Integration Architecture Message Flows IBM Technologies IBM ACEIBM MQIBM API Connect IBM Integration Solutions API Development REST APIsSOAP Web Services Microservices API Integration API Security API Design Messaging IBM MQMessage Queuing Asynchronous Messaging Publish/Subscribe Message Routing Programming ESQLShell Scripting Data Formats XMLJSONDFDLCSVMRMXMLNSCISO8583XML Schema Data Mapping Message Transformation Databases Oracle Database Microsoft SQL Server MySQLSQLDev Ops Git Jenkins CI/CD Pipelines Dev Ops Deployment Automation Testing Unit Testing Integration Testing SOAPUIPostman Debugging Performance Testing Operating Systems Linux AIXUNIXSDLCAgile Scrum SDLCCode Reviews Technical Documentation Production Support Root Cause Analysis (RCA) Preferred Skills IBM API Connect Microservices Architecture Container Platforms (Docker/Kubernetes) Open Shift Cloud Integration Banking Domain Insurance Domain Financial Services Enterprise Integration Patterns (EIP)

Scale’s rapidly growing Global Public Sector team is focused on using AI to address critical challenges facing the public sector around the world. Our core work consists of:<br><br>Creating custom AI applications that will impact millions of citizens Generating high-quality training data for national LLMsUpskilling and advisory services to spread the impact of AI<br><br>We are hiring Applied AI Engineers to build custom end-to-end AI applications for our public sector clients using the latest developments in the field of AI. You will also get the opportunity to develop and be part of creating custom datasets, evaluations, and fine-tuning these sophisticated models to maximize performance and apply on real world use cases with global reach.<br><br>At Scale, we’re not just building AI solutions—we are building repeatable blocks to enable the public sector to transform their operations and better serve citizens through cutting-edge technology. If you’re ready to shape the future of AI in the public sector and be a member of our rapidly expanding team, we’d love to hear from you.<br><br>You will:<br><br>Partner with public sector clients to deeply understand their challenges and define AI-driven solutions Build and deploy end-to-end AI applications into production leveraging latest developments from the biggest AI labs, and open source models Collaborate with cross-functional teams, including data annotation specialists, to create high-quality training datasets Design and maintain robust evaluation frameworks to ensure the reliability and effectiveness of AI models Participate in customer engagements, including occasional travel (approximately two weeks per quarter) Contribute to the scaling of AI capabilities in the public sector through hands-on knowledge sharing<br><br>Ideally you’d have:<br><br>A strong engineering background, with a Bachelor’s degree in Computer Science, Mathematics, or a related quantitative field (or equivalent practical experience)7+ years of post-graduation engineering experience, with demonstrated proficiency in languages such as Python, Type Script/Java Script, Java, or C++.2+ years of experience applying AI/ML in production environments, such as deploying deep learning solutions, building generative/agentic AI applications or setting up evaluations pipelines Familiarity with cloud-based machine learning tools and platforms (e.g. AWS, GCP, Azure) Strong problem-solving skills, with a data-driven approach to iterating on machine learning models and datasets Excellent written and verbal communication skills to collaborate effectively in a cross-functional environment<br><br>Nice to haves:<br><br>Experience working at a startup, particularly as founding engineer Experience building and deploying large-scale AI solutions Strong written and verbal communication skills to operate in a cross-functional team environment Proficiency in Arabic (if focused on language models)<br><br>For those applying based in Qatar: Residency and employment in Qatar requires certain permissions (visa and permits) issued by the Qatari authorities. As part of the application process, candidates will be asked to provide personal information, including residency status and nationality, which is required for visa processing. This information is collected solely for immigration compliance purposes and will be not used as a criterion in any hiring decision unless such use is lawfully permitted. Visa issuance is at the discretion of the Qatari authorities. If you are successful in your application, you will be required to provide the documentation requested by Scale and the authorities to obtain the necessary permissions for you to live and work in Qatar, and Scale will work with successful candidates to support the visa application process.<br><br>PLEASE NOTE: Our policy requires a 90-day waiting period before reconsidering candidates for the same role. This allows us to ensure a fair and thorough evaluation of all applicants.<br><br>About Us:<br><br>At Scale, our mission is to develop reliable AI systems for the world's most important decisions. Our products provide the high-quality data and full-stack technologies that power the world's leading models, and help enterprises and governments build, deploy, and oversee AI applications that deliver real impact. We work closely with industry leaders like Meta, Ernst & Young, Mayo Clinic, Time Inc., the Government of Qatar, and U. S. government agencies including the Army and Air Force. We are expanding our team to accelerate the development of AI applications.<br><br>We believe that everyone should be able to bring their whole selves to work, which is why we are proud to be an inclusive and equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability status, gender identity or Veteran status. <br><br>We are committed to working with and providing reasonable accommodations to applicants with physical and mental disabilities. If you need assistance and/or a reasonable accommodation in the application or recruiting process due to a disability, please contact us at accommodations@scale.com. Please see the United States Department of Labor's Know Your Rights poster for additional information.<br><br>We comply with the United States Department of Labor's Pay Transparency provision. <br><br>PLEASE NOTE: We collect, retain and use personal data for our professional business purposes, including notifying you of job opportunities that may be of interest and sharing with our affiliates. We limit the personal data we collect to that which we believe is appropriate and necessary to manage applicants’ needs, provide our services, and comply with applicable laws. Any information we collect in connection with your application will be treated in accordance with our internal policies and programs designed to protect personal data. Please see our privacy policy for additional information.

Job Summary<br><br>The role holder will be supporting the Head of Electrical in managing engineering activities related to the design, development, coordination, implementation, execution, and control of projects, ensuring alignment with the Company’s strategy, commitments, and goals.<br><br>The role holder focuses on providing technical guidance, problem-solving, decision-making, and analysis of the engineering department portfolio using innovative and analytical techniques. The main responsibilities are related to the Electrical Plants/ Field areas.<br><br>Key Accountabilities<br><br>Oversee design of electrical systems including substations, switchgear, transformers, and emergency power systems. Review single-line diagrams, load lists, cable schedules, and protection coordination studies. Ensure compliance with IEC standards and EPCC Contract requirements. Assist the Head of Engineering in coordinating multidisciplinary engineering activities to ensure alignment with Project objectives, EPCC Contract requirements, and Project procedures. Track and report progress of engineering deliverables, highlighting deviations and supporting recovery actions. Review, verify and comment on technical documentation submitted by EPCC Contractor, including datasheets, drawings, specifications, and vendor documents. Participate in kick-off meetings with subcontractors to align on technical scope, quality expectations, and schedule. Follow up on fabrication progress and support resolution of NCRs or fabrication defects reported by subcontractors. Collaborate with the construction team to ensure proper installation of equipment and systems in accordance with engineering deliverables. Monitor engineering deliverables against the commissioning-driven project schedule and report deviations. Coordinate with EPCC Contractor and internal teams to ensure timely completion of engineering inputs required for commissioning. Coordinate engineering interfaces between internal departments (Operations, Maintenance, Projects, Procurement) and EPCC Contractor. Support the Interface Team in technical review of spare parts, tie-in readiness, and resolution of interface-related issues. Participate in multidisciplinary reviews such as HAZOP, HAZID, SIL, QRA, and 3D model reviews, and ensure closure of action items. Support identification and tracking of engineering-related risks and contribute to the Project Risk Register. Maintain records of technical reviews, NCR resolutions, inspection outcomes, and interface coordination. Support audit preparation and participate in lessons learned sessions.<br><br>Desired Candidate Profile<br><br>Bachelor’s degree in electrical engineering or relevant discipline. A minimum of 5 Years of direct and relevant experience within the Oil & Gas and Petrochemical Industry, or EPC company. Good exposure to process engineering software design and knowledge in all aspects of Process Engineering implementation and execution based on International Standards. Having strong skills in Project Management, Leadership and team management. Preferably having experience in Ammonia & Urea Major Projects.

Job Summary<br><br>The role holder will be supporting the Head of Electrical in managing engineering activities related to the design, development, coordination, implementation, execution, and control of projects, ensuring alignment with the Company’s strategy, commitments, and goals.<br><br>The role holder focuses on providing technical guidance, problem-solving, decision-making, and analysis of the engineering department portfolio using innovative and analytical techniques. The main responsibilities are related to the Electrical Plants/ Field areas.<br><br>Key Accountabilities<br><br>Oversee design of electrical systems including substations, switchgear, transformers, and emergency power systems. Review single-line diagrams, load lists, cable schedules, and protection coordination studies. Ensure compliance with IEC standards and EPCC Contract requirements. Assist the Head of Engineering in coordinating multidisciplinary engineering activities to ensure alignment with Project objectives, EPCC Contract requirements, and Project procedures. Track and report progress of engineering deliverables, highlighting deviations and supporting recovery actions. Review, verify and comment on technical documentation submitted by EPCC Contractor, including datasheets, drawings, specifications, and vendor documents. Participate in kick-off meetings with subcontractors to align on technical scope, quality expectations, and schedule. Follow up on fabrication progress and support resolution of NCRs or fabrication defects reported by subcontractors. Collaborate with the construction team to ensure proper installation of equipment and systems in accordance with engineering deliverables. Monitor engineering deliverables against the commissioning-driven project schedule and report deviations. Coordinate with EPCC Contractor and internal teams to ensure timely completion of engineering inputs required for commissioning. Coordinate engineering interfaces between internal departments (Operations, Maintenance, Projects, Procurement) and EPCC Contractor. Support the Interface Team in technical review of spare parts, tie-in readiness, and resolution of interface-related issues. Participate in multidisciplinary reviews such as HAZOP, HAZID, SIL, QRA, and 3D model reviews, and ensure closure of action items. Support identification and tracking of engineering-related risks and contribute to the Project Risk Register. Maintain records of technical reviews, NCR resolutions, inspection outcomes, and interface coordination. Support audit preparation and participate in lessons learned sessions.<br><br>Desired Candidate Profile<br><br>Bachelor’s degree in electrical engineering or relevant discipline. A minimum of 5 Years of direct and relevant experience within the Oil & Gas and Petrochemical Industry, or EPC company. Good exposure to process engineering software design and knowledge in all aspects of Process Engineering implementation and execution based on International Standards. Having strong skills in Project Management, Leadership and team management. Preferably having experience in Ammonia & Urea Major Projects.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Key Responsibilities<br><br>Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Identifies software necessary to enable piping group to function effectively. Provide specialist technical support, supervision and advice to the discipline and project teams; participate in peer reviews; Ensures recognised onshore & offshore engineering practices applicable to piping design and topside/plant layout are adopted within the discipline. Knows the project and discipline scope/cost/time requirements, ensures the team to meets the expectations, and liaises with other disciplines to ensure project success. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, drives squad checking, recommends improvements, and takes action where required. Collaborates with project team in review of project documentation such as proposals, estimates, budgets and schedules. Leads weekly piping meetings, reviews progress reports and required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Establish a list of discipline deliverables. Controls, monitors and progresses these deliverables to an agreed schedule. Lead the production of detailed designs and drawings, specifications, data, calculations and reports .<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being.healthy and safe workplaces and activities.<br>Industry Specific Experience<br><br>Extensive Piping Engineering experience at a senior level within the Oil & Gas industry in both Onshore and Offshore projects. Design & Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers. Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams. Expertise on stress (unbalanced / transient conditions), complicated hot-tapping plugging of C3/C4 services, Inconel 625 materials specs and datasheets<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br>Full-Time bachelor’s degree in mechanical engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Work with Us. Change the World.</strong></p><br><p>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.</p><br><p>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.</p><br><p>We're one global team driven by our common purpose to deliver a better world. Join us.</p><br><br>Job Description<br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Responsible for independent review and monitoring of the Contractor’s baseline schedule and updates, ensuring alignment with contractual milestones and advising the Client on risks and mitigation measures.</li><li>Review Contractor’s baseline schedule, logic, sequencing, and critical path.</li><li>Assess schedule updates, progress, and recovery plans.</li><li>Identify delays, risks, and potential impacts on project milestones.</li><li>Validate time-related claims including Extension of Time (EOT).</li><li>Provide independent reports, dashboards, and recommendations to the Client.</li><li>Coordinate with design and site teams to ensure schedule integration.</li></ul><br>Qualifications<br><ul><li>Bachelor's degree in Civil Engineering, Urban Planning, or a related field</li><li>Minimum of 12&nbsp;years of experience in infrastructure planning and engineering</li><li>Professional Engineer (PE) certification preferred; Project Management Professional (PMP) certification is a plus</li><li>Proficiency in project management software (e.g., Microsoft Project, Primavera P6)</li><li>Strong skills in AutoCAD or similar CAD software and GIS applications</li><li>Advanced proficiency in Microsoft Office Suite, particularly Excel, PowerPoint, and Word</li><li>Demonstrated experience with urban development projects and infrastructure systems</li><li>Familiarity with environmental impact assessments and sustainable urban development practices</li><li>Excellent analytical and problem-solving skills, with a keen attention to detail</li><li>Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse teams</li></ul><br>Additional Information<br><p><em>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. <strong>To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.</strong></em></p><br><p><strong>About AECOM</strong>&nbsp;</p><br><p>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&amp;D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,&nbsp;well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.&nbsp;</p><br><p>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.&nbsp;</p><br><p><strong>What makes AECOM a great place to work</strong>&nbsp;</p><br><p>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.&nbsp;</p><br><p>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.&nbsp;</p><br><br><br> </div>

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment. What this opportunity involves:<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What this is NOT:<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What we look for:<br><br>8+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard:<br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Effort estimate<br><br>Tasks for this project are estimated to take 30 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation:<br><br>Paid per accepted task. Your rate depends on the qualification tier you reach and how efficiently you complete tasks — up to the equivalent of $200/hr. Because payment is per task, a faster pace raises your effective hourly rate.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

Please submit your CV in English and indicate your level of English proficiency.<br><br>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<br><br>What This Opportunity Involves<br><br>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br><br>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<br><br>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<br><br>What This Is NOT<br><br>Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate<br><br>What We Look For<br><br>5+ years in software development Core stack: Python (Fast API), Java Script/Type Script (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+<br><br>Why this is hard <br><br>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br><br>How It Works<br><br>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid<br><br>Effort estimate<br><br>Tasks for this project are estimated to take 20 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br><br>Compensation<br><br>Up to $50/hr equivalent, depending on level and pace. Tasks are estimated at :20 hours each; you set your own schedule.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Essential Duties &amp; Responsibilities by Dimensions:</strong></p><p><strong>A. Shareholder &amp; Financial:</strong> Coordinate with the Head of Enterprise Architecture to provide architectural recommendations that fall inline with the Group s overall strategy and vision.</p><p><strong>B.Customer (Internal &amp; External):</strong> Meet with internal managers and project owners to understand and document their requirements prior to providing suitable solutions. Build and maintain strong and effective relationship with all other related departments, units and vendors to achieve the Group s goals/ objectives.</p><p><strong>C.Internal (Processes, Products, Regulatory):</strong> Develop and deliver against the organization s strategy and successfully implement Infrastructure Architecture through active engagement delivery and investment programs. Use industry standard architecture methodologies to successfully implement and grow the Infrastructure Architecture of the bank. Design and Build an up to date Infrastructure Architecture to ensure smooth and seamless propagation of data between systems and subsystems. Cover all internal systems as well as their dependence on multiple vendor products and services. Propose new enterprise standards based on business need, IT need and technology advances. Assist project teams to implement the standards into business applications. Employ and enforce IT industry standards such as ITIL. Performs architecture reviews with infrastructure teams, Internal Risk management (IRM) and audit teams to ensure adherence to standards, information risk management policies. Work closely with network and infrastructure teams, and project teams to understand their needs and ensure the best enterprise standard is implemented. Identify gaps in the Corporate Information/Data Model and address them actively in collaboration with the business support teams. Maintains a technology watch to identify emerging technologies that are relevant to the line of business. Builds awareness of key emerging technologies and promotes to the business in order to address their issues. Lead the preparation and maintenance of documentation and standards for the different activities and systems user guides as per the overall documentation policy. Ensure that design and development standards are integrated with the Group s governance framework. Ensure compliance and adherence to existing standards and policies in regards to IT security, internet and VPN security, and BCP and disaster recovery. Carry out requirements as directly assigned by the Head of IT Enterprise Architecture and in accordance with the overall business plan.</p><p><strong>D.Learning &amp; Knowledge:</strong> Understand user requirements and existing systems in order to provide the proper solutions by enhancing the existing systems or providing new systems. Strong knowledge of infrastructure architecture and limitations in deciding on methods of problem solving which may impact overall resource availability and time to deliver changes. Perform careful analysis to ensure changes are in congruence with the Group s long term planning and approved strategy. Initiate regular meetings which aim to add value by discussing progress, problems, and any other issues of concern. Identify areas for professional development of self and direct reports and act to enhance professional development of self and others.</p><p><strong>E.Other:</strong> Ensure high standards and security of confidentiality to safeguard commercially sensitive information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education/Experience Requirements: University graduate (Computer Science or related degree) with at least 4 years experience in financial services with a specialization in infrastructure architecture, design and management. Specific courses in IT security and Infrastructure Architecture. Required Special Skills: Self-driven with well-developed motivational and team-building skills. Strong experience in Architectural design. Excellent oral and written communication skills in English and Arabic (preferable). Effective leadership and management skills. Strong analytical, problem solving, and decision-making skills. Project management skills. Strong documentation skills. Good interpersonal skills.</p><p></p></section>