Embedded Systems Engineer Jobs in Qatar

Job Summary:The role holder is responsible for managing the projects department and for the overall direction, development, coordination, implementation, execution, control, completion, handover, and close-out of projects ensuring consistency with Company strategy, commitments, and goals. Ensuring this opportunity are executed as greenfield and brownfield projects within existing QAFCO facilities, Shutdown and non-shutdown. The role holder leads multi-disciplined teams of head of sections, engineers that will manage a balanced project department projects portfolio on short and long term according to the company’s requirements and plans. Oversees the contracting, engineering, procurement, construction, commissioning and handover until close-out of the project’s safety within agreed cost and schedule while meeting quality, project objectives and business controls following QAFCO project management systems.<br>The role is heavily oriented towards providing direction to technical problem solving, decision-making, analysis of project department portfolio through the application of analytical and innovative techniques. The role holder reports to the Chief Technical Officer.<br>Key Accountabilities:Act as the owner/custodian of the QAFCO’s project management methodology and coordinate, tracks for continuous improvements, integrity of system, compliance, training, sustainability. Plan, direct, lead and organise the activities of the projects department to ensure that budgets and R&A plans are met through the optimisation and efficient utilisation of available manpower and working hours and that staff are motivated to realise potential and make significant contributions. Direct and manage the activities of Head of Sections, Project Engineers, Project Support in the planning, scheduling, design quality and execution of projects. Support the Sr. Management with the execution of all aspects of the project including managing the staff, providing vision and strategic leadership, providing, and contributing to the 5-years capital plan, monitoring and control of project schedules and budgets, evaluating project productivity and quality and directing the complete technical operations of the project. Providing recurrent projects executive summary reporting. Monitor project’s balance score cards to meet objectives and expectations. Participate on the performance management meetings. Review, develop and recommend the appropriate organization structure for the department that will be utilise human capital on the current and forecasted workload to meet the business objectives. Ensure that the relevant disciplines / trades follow valid standards, technical requirements, and good engineering practices to ensure that projects are executed in line with agreed specifications. Approve and maintain modern and good standards on engineering practices in the department. Ensure that the MOC process is followed into the projects, prior to changes taking place. This as part of the governance. Ensure RCA on projects is implemented for positive and gaps and to capture as lessons learnt projects life cycle, and their implementation in future projects. Develop QAFCO’s project management methodology, tools, templates, forms, procedures & guidelines to ensure consistent evaluation and implementation of projects. Actively contribute to balance the project portfolio on short- and long-term regarding contribution to profitability, safety, health, environment, and product quality, according to QAFCO’s goals and objectives. Liaise closely with other departments/sections within QAFCO concerning project planning and execution. Monitor and approve project planning and strategy baselines and updates/changes prior to approach respective committees related. Ensure proper interfacing during entire project life cycle with application of the QAFCO’s project management methodology. Guide and provide direction for potential problem areas, technical information, staffing priorities and identify solutions where necessary. Lead by example, as a role model with innovation and differentiation, sharing and developing knowledge, competencies, serving as coach and mentors to all projects department members, and functions supporting on project Responsible to maintain proper staffing levels to meet project requirements. Innovate spirit in the department, motivate, develop, and appraise performance of employees under area of responsibility to achieve improved performance and individual contribution. Plan and participate in the development of nationals for their learning and growing career.<br>Desired Candidate Profile:Bachelor’s degree in relevant Engineering discipline.15 years direct and relevant experience in oil/gas or petrochemical industry with minimum 5 years in a project management role. Fully conversant and knowledge as Subject Matter expert in project management and project engineering and construction management will be added as an advantage.

Job Summary:The role holder is responsible for managing the projects department and for the overall direction, development, coordination, implementation, execution, control, completion, handover, and close-out of projects ensuring consistency with Company strategy, commitments, and goals. Ensuring this opportunity are executed as greenfield and brownfield projects within existing QAFCO facilities, Shutdown and non-shutdown. The role holder leads multi-disciplined teams of head of sections, engineers that will manage a balanced project department projects portfolio on short and long term according to the company’s requirements and plans. Oversees the contracting, engineering, procurement, construction, commissioning and handover until close-out of the project’s safety within agreed cost and schedule while meeting quality, project objectives and business controls following QAFCO project management systems.<br>The role is heavily oriented towards providing direction to technical problem solving, decision-making, analysis of project department portfolio through the application of analytical and innovative techniques. The role holder reports to the Chief Technical Officer.<br>Key Accountabilities:Act as the owner/custodian of the QAFCO’s project management methodology and coordinate, tracks for continuous improvements, integrity of system, compliance, training, sustainability. Plan, direct, lead and organise the activities of the projects department to ensure that budgets and R&A plans are met through the optimisation and efficient utilisation of available manpower and working hours and that staff are motivated to realise potential and make significant contributions. Direct and manage the activities of Head of Sections, Project Engineers, Project Support in the planning, scheduling, design quality and execution of projects. Support the Sr. Management with the execution of all aspects of the project including managing the staff, providing vision and strategic leadership, providing, and contributing to the 5-years capital plan, monitoring and control of project schedules and budgets, evaluating project productivity and quality and directing the complete technical operations of the project. Providing recurrent projects executive summary reporting. Monitor project’s balance score cards to meet objectives and expectations. Participate on the performance management meetings. Review, develop and recommend the appropriate organization structure for the department that will be utilise human capital on the current and forecasted workload to meet the business objectives. Ensure that the relevant disciplines / trades follow valid standards, technical requirements, and good engineering practices to ensure that projects are executed in line with agreed specifications. Approve and maintain modern and good standards on engineering practices in the department. Ensure that the MOC process is followed into the projects, prior to changes taking place. This as part of the governance. Ensure RCA on projects is implemented for positive and gaps and to capture as lessons learnt projects life cycle, and their implementation in future projects. Develop QAFCO’s project management methodology, tools, templates, forms, procedures & guidelines to ensure consistent evaluation and implementation of projects. Actively contribute to balance the project portfolio on short- and long-term regarding contribution to profitability, safety, health, environment, and product quality, according to QAFCO’s goals and objectives. Liaise closely with other departments/sections within QAFCO concerning project planning and execution. Monitor and approve project planning and strategy baselines and updates/changes prior to approach respective committees related. Ensure proper interfacing during entire project life cycle with application of the QAFCO’s project management methodology. Guide and provide direction for potential problem areas, technical information, staffing priorities and identify solutions where necessary. Lead by example, as a role model with innovation and differentiation, sharing and developing knowledge, competencies, serving as coach and mentors to all projects department members, and functions supporting on project Responsible to maintain proper staffing levels to meet project requirements. Innovate spirit in the department, motivate, develop, and appraise performance of employees under area of responsibility to achieve improved performance and individual contribution. Plan and participate in the development of nationals for their learning and growing career.<br>Desired Candidate Profile:Bachelor’s degree in relevant Engineering discipline.15 years direct and relevant experience in oil/gas or petrochemical industry with minimum 5 years in a project management role. Fully conversant and knowledge as Subject Matter expert in project management and project engineering and construction management will be added as an advantage.

Project Controls Director Position Summary The Project Controls Director is responsible for leading and managing all project control functions across large-scale Power Plant construction projects, including planning, scheduling, cost control, progress measurement, reporting, risk management, and performance analysis. The role ensures projects are delivered safely, on schedule, within budget, and in accordance with contractual and client requirements. The successful candidate will have extensive EPC experience in thermal power plants, combined cycle power plants, gas-fired power plants, renewable energy projects, substations, and associated infrastructure.<br><br>Key Responsibilities Planning & Scheduling Lead the development and implementation of integrated project schedules. Establish project baselines, milestones, critical paths, and recovery plans. Monitor schedule performance and identify potential delays. Ensure compliance with EPC contract requirements and project execution plans. Direct planning teams across engineering, procurement, construction, and commissioning phases. Cost Control & Budget Management Establish project cost control systems and procedures. Monitor project budgets, commitments, accruals, and forecasts. Analyze cost variances and recommend corrective actions. Review monthly cost reports and cash flow forecasts. Support project management in achieving commercial objectives. Progress Measurement & Reporting Implement project performance measurement systems. Ensure accurate project progress tracking and earned value analysis. Prepare executive management reports and dashboard presentations. Present project status updates to clients and senior management. Risk & Change Management Lead schedule risk assessments and mitigation planning. Monitor project changes, variations, and claims impact. Evaluate schedule and cost implications of project changes. Support commercial teams on extension of time (EOT) claims and dispute resolution. Leadership & Stakeholder Management Lead multidisciplinary Project Controls teams. Mentor and develop planners, cost engineers, and reporting specialists. Coordinate with clients, consultants, subcontractors, and project stakeholders. Drive project control best practices across all project phases. Systems & Performance Management Ensure effective utilization of Primavera P6 and project control software. Implement KPI reporting and project performance monitoring frameworks. Develop project control procedures aligned with international standards. Promote digital reporting and data-driven decision-making<br>.<br>Minimum Qualifications Bachelor's Degree in Engineering, Construction Management, Project Management, or related discipline. Master's Degree is an advantage. PMP, PSP (Planning & Scheduling Professional), AACE, or equivalent certifications preferre<br>d.<br>Experience Requirements Minimum 20 years of Project Controls experience within EPC, Power, Energy, or Industrial projects. Minimum 10 years in a senior leadership position managing large Project Controls teams. Proven experience on large-scale Power Plant construction projects valued above USD 500 Million. Strong experience in Combined Cycle Power Plants (CCPP), Gas Power Plants, Thermal Power Plants, or Renewable Energy Projects. Experience working for leading EPC contractors. Middle East and international project experience is highly preferr<br>ed.<br>Technical Competencies Primavera P6 Expert EPC Project Controls Management Cost Control & Forecasting Earned Value Management (EVM) Progress Measurement Systems Risk Analysis & Mitigation Power Plant Construction Scheduling Change Management Claims & Extension of Time Analysis Executive Reporting & Dashboard Development Contract Administration Support Resource Planning & Productivity Anal<br>ysis<br>Key Skills Strategic Leadership Stakeholder Management Commercial Awareness Analytical & Problem-Solving Skills Team Leadership & Mentoring Decision-Making Ability Presentation & Communication Skills Conflict Resolution Results-Oriented Mi<br>ndset

Role Purpose<br><br>The Data Infrastructure & Operations Consultant designs, configures and supports the infrastructure and operational services required for client data-management, integration, analytics and security capabilities. The role ensures that environments, connectivity, capacity, access, monitoring, backup, recovery and support arrangements are documented and aligned with approved architecture and service requirements.<br><br>The consultant works with client infrastructure teams, system owners, platform administrators, architects, engineers and security specialists. It may provision or support environments under controlled access, but client technology teams retain production ownership and operational authority. The role must combine technical delivery with disciplined operational documentation, evidence and knowledge transfer so services can be maintained reliably after implementation.<br><br>Key Responsibilities<br><br>Assess infrastructure, hosting, network, connectivity, capacity, environment and service requirements for client data solutions. Design or support approved on-premises, cloud or hybrid infrastructure configurations. Provision and configure authorised development, test and production-support environments through client change controls. Implement connectivity, certificates, service accounts, access, secrets and infrastructure security requirements. Support installation and operation of data platforms, integration services, databases and analytical components. Establish monitoring, alerting, capacity, availability, performance and service-level evidence. Design and test backup, restoration, disaster-recovery and continuity procedures for relevant services. Maintain configuration records, infrastructure diagrams, asset information, patch status and change history. Support incident, problem and root-cause investigation and coordinate corrective action with client teams and vendors. Validate operational readiness, support ownership, escalation routes and acceptance evidence before go-live. Develop runbooks, maintenance procedures, support models and operational handover packs. Train client infrastructure and operations personnel and provide controlled transition support.<br><br>Minimum Requirements<br><br>Education<br><br>Bachelor's degree or diploma in information technology, computer science or a related field. An equivalent combination of relevant education and directly applicable consulting or implementation experience may be considered.<br><br>Professional Experience<br><br>Typically 3-8 years in infrastructure, systems administration, cloud or enterprise application support. Experience in infrastructure, systems administration, cloud services, database platforms or enterprise application support. Experience with networking, identity, monitoring, backup, recovery, patching and configuration management. Experience supporting data or analytics platforms and working within production change controls. Experience producing operational documentation and transferring services to support teams.<br><br>Technical and Domain Knowledge<br><br>On-premises, cloud and hybrid infrastructure concepts. Systems administration, networking and connectivity. Identity, service accounts, certificates and access controls. Monitoring, alerting, capacity, availability and performance. Backup, restoration, disaster recovery and continuity. Patching, configuration, release and change management. Incident, problem and operational support processes. Infrastructure documentation, runbooks and service handover.<br><br>Core Competencies<br><br>Infrastructure operations. Systems administration. Networking. Monitoring. Backup/recovery. Change and incident management. Operational reliability. Troubleshooting. Service management. Documentation discipline. Eliciting operational requirements and identifying hidden dependencies. Explaining infrastructure options and service implications clearly. Working within controlled access, security and change processes. Coordinating infrastructure, platform, vendor and delivery teams. Producing complete configuration and operational evidence. Facilitating readiness reviews and structured handover. Supporting client operations without assuming production ownership.<br><br>Preferred Certifications<br><br>Relevant cloud or infrastructure certification IT service-management certification<br><br>Focus areas<br><br>Infrastructure operations Systems administration Networking<br><br>Ready to apply for this role?<br><br>Apply for Data Infrastructure & Operations Consultant

Company Description<br><br>Join Saipem and engineer a sustainable future.<br><br>We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.<br><br>Purpose Of The Position<br><br>As Shipping & Customs Manager you will respond to the Project Director/Technical Manager and be part of the Supply Chain / Logistics function within project execution scope. You will streamline shipping and customs activities, define the most suitable transportation and customs schemes, and supervise the safe, efficient and cost-effective movement of Saipem purchased materials, subcontractors’ equipment and company-provided items in compliance with project requirements, budget and schedule.<br><br>How can you support us? Here below your responsibilities:<br><br>Streamline shipping and customs activities within the supply chain process, coordinating with Procurement, Expediting & Inspection, Asset and Operational Logistics to improve efficiency, competences and cost control. Define the best transportation and customs scheme, including feasibility and cost assessment, according to actual project requirements. Supervise and manage transport and customs formalities for Saipem purchased materials, subcontractors’ equipment and company-provided items from agreed delivery point up to final destination. Support tendering and supply chain functions by defining transportation schemes, assessing feasibility and preparing related budget inputs. Define the overall Project Customs scheme during tendering and execution phases according to project fiscal organization, vendor locations, material origin and applicable customs/fiscal regulations. Support procurement activities by defining contractual delivery terms, providing transport costs, preparing packing specifications and shipping instructions. Liaise with Expediting & Inspection once goods are released for collection, ensuring timely shipment arrangement up to destination. Coordinate with Logistics to define Project Shipping instructions and ensure distribution through the Shipping and Customs Network to all transport offices involved. Support the Insurance department by ensuring proper notification where shipment value exceeds corporate insurance deductibles or when damage occurs during transportation. Review and approve Scope of Works, Purchase Requisitions and Technical Bid Evaluations relevant to Transport Frame Agreements and single dedicated shipments. Manage Transport Agreements and monitor utilization, approving related AfS / WO within power of attorney limits and authorizing SE / Progress Reports. Ensure proper document archiving and traceability of all records relevant to shipping and customs activities. Ensure the required information flow toward competent functions for liquidated damages and price revision matters. Assign Shipping & Customs Coordinators to projects and ensure adequate support from Shipping and Customs officers, including outsourced resources through the network when required. Participate in vendor qualification and provide feedback/reporting on owners, freight forwarders and customs brokers performance.<br><br>What are we looking for?<br><br>Education<br><br>Bachelor’s or Master’s degree in Logistics, Supply Chain Management, Engineering, Business Administration, or related discipline.<br><br>Experience<br><br>Minimum 10–15 years of experience in shipping, customs, logistics or supply chain roles, with proven experience managing transport schemes, customs formalities, vendors, freight forwarders and customs brokers within oil & gas, energy, EPC or large project environments.<br><br>Languages<br><br>Fluent in English (mandatory) Additional languages (Italian, French, Arabic) are a plus<br><br>Technical Skills<br><br>Strong knowledge of shipping, customs and international transport regulations, including customs documentation, declarations, VAT, tariffs, customs brokers and freight forwarder management. Ability to define overall Project Customs schemes according to project fiscal organization, vendor location, country of origin and local regulations. Expertise in transport planning, shipping instructions, packing specifications and Incoterms in line with project and contractual requirements. Experience with Scope of Works, Purchase Requisitions, Technical Bid Evaluations and Transport Agreements for frame agreements and dedicated shipments. Knowledge of port, air and sea operations, including documentation, handling, dangerous goods / out-of-gauge cargo and transport permits where applicable. Ability to manage cost estimation, budget monitoring, reporting and document archiving for shipping and customs activities.<br><br>IT Skills<br><br>Proficiency in Microsoft Office tools Familiarity with document management systems and logistics/shipping tracking tools Experience with ERP systems (e.g., SAP) is an advantage<br><br>What else should you know? <br><br>You will have the opportunity to coordinate international shipping and customs activities and support projects across EMEA and offshore/onshore locations, depending on project requirements.<br><br>What We Can Offer To You<br><br>Permanent Contract – Project-based position Corporate Benefits: We offer a comprehensive benefits package Working Hours: 45 hours (9 hours x 5 days) Availability may be required in line with project and operational shipping/customs requirements Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals. Location: Doha, Qatar<br>Your opinion helps us grow every day! We would greatly appreciate it if you could share your opinion by completing this short, anonymous survey. https://forms.office.com/e/3s Ce293xsf<br><br>Additional Information<br><br>We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form!<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more in our career page here and our Instagram profile here.<br><br>One vision, many paths, limitless possibilities.<br><br>PRIVACY POLICY<br><br>In accordance with the Qatar's Personal Data Privacy Protection Law (PDPPL) enacted as Law No. 13 of 2016 (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D. Lgs 196/03 and art 13 GDPR 679/16)

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>The job requires Male applicants.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must have at least Vocational Diploma / Short Course Certificate</li><li>Minimum of 5 years working experience is required for this position</li></ul><p>Additional Qualifications:</p><ul><li>Safety Observation _x000D_ Raise SO in CMMS when found during shift.</li><li>Security Rounds: _x000D_ Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li>Safety Check: _x000D_ Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. _x000D_ Ensure all safety signage is visible and up-to-date.</li><li>Emergency Response _x000D_ Respond to emergencies, such as equipment failures, fires, or spills.</li><li>PTW System _x000D_ Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li>Equipment Line Up / LOTO _x000D_ Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li>Equipment Inspection: _x000D_ Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. _x000D_ Check lubrication levels and perform routine lubrication as needed.</li><li>Parameter Monitoring: _x000D_ Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li>System Startup: _x000D_ Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li>System Shutdown: _x000D_ If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li>Alarm &amp; Event (A&amp;E) Analysis _x000D_ Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li>Shift Handover: _x000D_ Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. _x000D_ Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li>Plant Optimization _x000D_ Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li>Troubleshooting and Maintenance: _x000D_ Respond to any alarms or alerts and take necessary corrective actions. _x000D_ Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. _x000D_ Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li>Defect Management _x000D_ Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li>Monitoring of Chemical Treatment Systems _x000D_ Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li>Others and Extras _x000D_ Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). _x000D_ Occasionally attend site visits by visitors or contractors. _x000D_ Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">About the Opportunity <p>An established financial organisation is seeking a Enterprise Applications Analyst (Finance) to support and enhance mission-critical enterprise applications. The successful candidate will ensure system stability, contribute to ongoing enhancement projects and provide expert technical support for key business applications.</p> Responsibilities <ul> <li> <p>Support business-critical financial applications.</p> </li> <li> <p>Investigate and resolve complex system issues.</p> </li> <li> <p>Participate in system upgrades and enhancement projects.</p> </li> <li> <p>Gather and analyse business requirements.</p> </li> <li> <p>Work closely with vendors and internal stakeholders.</p> </li> <li> <p>Perform application testing and quality assurance.</p> </li> <li> <p>Produce technical documentation and user guidance.</p> </li> <li> <p>Support integrations between enterprise applications.</p> </li> <li> <p>Monitor system performance and recommend improvements.</p> </li> <li> <p>Participate in after-hours support when required.</p> </li> </ul> Requirements <ul> <li> <p>Bachelor's Degree in Computer Science, Information Systems or related field.</p> </li> <li> <p>5 7 years' experience supporting enterprise business applications.</p> </li> <li> <p>Experience with financial platforms or ERP solutions.</p> </li> <li> <p>Strong SQL and database knowledge.</p> </li> <li> <p>Experience working with application vendors.</p> </li> <li> <p>Excellent troubleshooting and analytical skills.</p> </li> <li> <p>Banking or financial services experience preferred.</p> </li> </ul></div></section>

<p><br></p><p>Mission</p><p>Plan, coordinate and control the Hook-up phase of the project, in accordance with Client and contractual requirements, within time and cost constraints and in compliance with HSE and Quality procedures</p><p>Express Hook-up needs during the E&amp;P phases (e.g., Make or Buy, Constructability, Material Management) identifying optimum balance amongn time, cost and feasibility</p><p>Ensure offshore construction activities completion, effective handover to commissioning team and company final acceptance</p><p>Tasks</p><p>Ensure that HSE and Quality procedures for Hook-up activities are correctly implemented</p><p>Ensure that Engineering disciplines are taking into account Hook-up requirements while developing detailed engineering deliverables, grant ing Hook-up material tagging and codification into material take off</p><p>Define Hook-up Project Execution Plan, interfacing with Fabrication, T&amp;I and commissioning in line with Project requirements</p><p>Support the Project Management T eam into the definition of Hook-up budget in line with the Project Execution Plan</p><p>Support Project Control in definition of schedule, staffing plan and cost control report</p><p>Define resources mobilization plan and ensure its implementation in cooperation with HR department</p><p>Ensure that Subcontract specifications and Technical Bid Evaluation are developed in a timely manner and in compliance with the Hook-up execution strategy</p><p>Ensure the preparation of Hook-up document list and Hook-up procedures and specifications by Project Hook-up lead</p><p>Participate or delegate participation to Hook-up team to engineering reviews (HAZID, Constructability, 3D model reviews, etc.)</p><p>Ensure that Hook-up Planning and Control detailed activities are performed through Hook-up Planning and Control system</p><p>Ensure that Hook-up requirements relevant to Welding, Painting &amp; Coating and Quality Control activities are analysed and that any special requirement is addressed in timely and effective manner, ahead the offshore campaign</p><p>Develop in cooperation with Fabrication a carry-over analysis aimed to minimize project disruptions due to non-completed activities in Fabrication Yard</p><p>Ensure in cooperation with Yard Project Manager that material management procedures are defined and enforced</p><p>Coordinate t he Hook-up Offshore Team in order to ensure a smooth offshore campaign completion</p><p>Represent Saipem towards Clients, Partners and Subcontractors managing contractual aspects relevant to Hook-up phase</p><p>Ensure the implementation of methodologies related to risk and knowledge management and to Saipem Golden and Silver Rules</p><p>Contribute into the preparation of project lessons learnt guaranteeing the monitoring of hook-up performance to capitalize experiences and identifying areas of improvement</p><p>Support the project management functions in identifying and assessing any potential variation from contract</p><p>Ensure that Hook-up team liaising with Project Control provides progress data in a timely and effective manner and review overall outcome</p><p>What are we looking for</p><p>Education: Master's Degree/bachelor's degree in: Engineering</p><p>Experience: 10 years of experience as a Hook-Up Manager within the oil and gas industry</p><p>Languages: English Language skills required (and any other specified by Project)</p><p>Technical Skills: Hook-UP</p><p>IT Skills: NA</p><p>What else should you know</p><p>The start date is as soon as possible.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements &amp; Summary</strong></p><ul><li>Skills : Commissioning Engineer / HUC , Construction Manager</li><li>Experience : 15 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Location : Qatar, Qatar</li></ul><p><strong>What are we looking for</strong></p><ul><li>Education: Master's Degree/bachelor's degree in: Engineering</li><li>Experience: 10 years of experience as a Hook-Up Manager within the oil and gas industry</li><li>Languages: English Language skills required (and any other specified by Project)</li><li>Technical Skills: Hook-UP</li><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for highly skilled Web Scraping specialists to join the Tendem project (https://tendem.<br>ai/) and drive specialized data scraping workflows for real-world use cases.<br> Mindrift is looking for highly skilled Python Data Scraping Engineers to join the Tendem project and drive specialized data scraping workflows for real-world applications.<br> In this role, you'll apply your expertise in web scraping, data extraction, and data processing to deliver accurate, reliable, and high-quality results.<br> This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction, and processing.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Python Data Scraping Engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing tools such as Apify, OpenRouter, and other technologies, alongside your own technical expertise and approaches.<br> Key Responsibilities Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.<br> Leverage available tools and custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.<br> Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.<br> Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.<br> Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.<br> Educational qualifications At least 3+ years of relevant experience in data engineering, web scraping, automation, or software development (required).<br> Bachelor’s or Master’s Degree in Engineering, Applied Mathematics, Computer Science, or related technical fields is a plus.<br> Academic and/or Professional Experience Candidates should have a strong technical foundation and practical experience with scripting, automation, and data extraction workflows.<br> We are looking for specialists who can solve non-trivial problems, work confidently with modern web technologies and data processing tools, and systematically collect, structure, and validate data from diverse sources.<br> A methodical, detail-oriented approach and the ability to work independently are essential.<br> Technical Skills (Essential) Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML) Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets) Additional requirements Hands-on experience with LLMs and AI frameworks to enhance automation and problem-solving Strong attention to detail and commitment to data accuracy Self-directed work ethic with ability to troubleshoot independently A link to GitHub is a plus English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $37 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<p><strong>Primary Functions</strong></p><ul><li>To co-ordinate and supervise the activities of the foremen and his crew on the project.</li><li>Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilities</li></ul><p><strong>Tasks and Responsibilities</strong></p><ul><li>To set and apply standards of SAFETY, ETHICS and QUALITY to comply with procedures and take action/s where Procedures and policy are not met and rectify/report immediately.</li><li>To be capable of communicating fluently with Crew, Foremen, Superintendent and all others with whom he liaises.</li><li>Be capable of reading and understanding drawings, project specifications and procedures. and be capable of taking the correct remedial actions. (Wherever Applicable).</li><li>To be conversant with the specific standards applicable to the project / area of work.</li><li>To be capable of looking four weeks ahead in planning of work for the project utilize the project current plan for planning for future work.</li><li>Provide his Foremen with drawings, WPS and information require to do the work efficiently, productively and safely.</li><li>Interface with the production engineer to ensure material is available for the planned work.</li><li>To ensure Proper tools and equipment’s are available and they are utilized efficiently, productively and safely.</li><li>To utilize the overall project / area plan(s), milestone dates, yard layouts and construction drawings to understand the overall view of the project and or his area of responsibility.</li><li>Have an overall view and understanding of the project completion including but not limited to construction methodology, fab sequence and milestone dates.</li><li>Forecast resources required for the planned work ahead (Manpower, Equipment&#x27;s etc.)</li><li>To be able to conduct meeting with those reporting to him in an organized manner.</li><li>To set targets of production for each of those directly reporting to him, targets for Foremen.</li><li>To be able to communicate supports services in the yard, QC & NDT.</li><li>Provide written instruction where necessary to those directly reporting to him.</li><li>Drive the team to achieve progress, productivity, safety and quality.</li><li>Know and understand the estimated man-hours on the work packs, maintain man-hours booking within estimate and provide weekly progress to production engineers.</li><li>Take actions where standards and targets are not met.</li><li>Where necessary refer quality / progress/ productivity issue to his superintendent and provide recommendation for improvement</li><li>Address any issue of poor quality/ productivity and act where appropriate.</li><li>Report area of poor performance and provide recommendation for improvement.</li><li>Provide accurate feedback to Superintendent.</li><li>Ensure CIR (Computer Input Request) submitted and RFI (Request for Inspection) are raised on timely manner.</li><li>Conduct TBT with crew, conduct safety walkthrough and address any issue of safety, check HIT process.</li><li>Review TRA with his foremen when require and ensure it is discussed with his crew.</li><li>Maintain good housekeeping on his work area. Promote BBSM process and be responsible for his team’s safety.</li><li>Lead by example and make sure company policies and procedures are followed.</li><li>Ensure proper plan of storage of welding consumable to eliminate any chance of welding consumable mix up and wrong selection.</li><li>Interface with F&M department to ensure timely calibration of welding machines.</li><li>Interface with Welding engineers to qualify WPS, welders for specific project.</li><li>Proper planning of qualifications in welding school to meet project requirements</li></ul><p>Other Expectations:</p><ul><li>Promote implementation of QHSES initiatives and drive achieving objectives</li></ul><br/><p><strong>Desired Candidate Profile</strong></p><p><strong>Education Qualification and Experience</strong></p><p><strong>Education:  </strong>High School Diploma Level</p><p><strong>Experience:</strong></p><ul><li>10+ years of experience in Offshore Construction industry</li><li>Has an exposure to a multidiscipline work environment.</li><li>Must understand governing code requirements and be able to interpret and apply project specification</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> Hiring: Construction Superintendent (Scaffolding) </strong><strong></strong><br> <strong>Location:</strong> Doha, Qatar<br> <strong>Work Split:</strong> 50% Offshore | 50% Onshore<br> <strong>Rotation:</strong> 12 Weeks ON / 2 Weeks OFF<br> <strong>Schedule:</strong> 6 Days per Week<br> ⏰ <strong>Working Hours:</strong> 8-10 Hours per Day<br> <strong>Industry:</strong> Oil &amp; Gas | LNG | EPC | Major Projects<br> We are currently seeking an experienced <strong>Construction Superintendent (Scaffolding)</strong> to support major Onshore and Offshore Oil &amp; Gas projects in Qatar. The successful candidate will lead scaffolding safety, compliance, risk management, and construction support activities while ensuring alignment with industry standards and project requirements.<br> <strong>Key Responsibilities</strong><br> ✅ Review and ensure compliance of Onshore and Offshore scaffolding activities with applicable standards, procedures, and best industry practices.<br> ✅ Audit and monitor ScafTag systems and EPC Contractor scaffolding programs, including training and competency assessments.<br> ✅ Support risk screening and formal risk assessments related to scaffolding erection activities for greenfield and brownfield projects.<br> ✅ Act as PMT focal point for scaffolding-related issues and provide technical guidance to site teams.<br> ✅ Monitor competency development and skills enhancement of contractor and subcontractor scaffolding personnel.<br> ✅ Participate in and lead incident investigations when required.<br> ✅ Establish strong SHE&amp;S networks and promote a positive safety culture across project stakeholders.<br> ✅ Drive lessons learned initiatives and best practice sharing across project teams.<br> ✅ Support safety campaigns, hazard management programs, and field safety leadership activities.<br> <strong>Requirements</strong><br> <strong>Qualifications</strong><ul><li>CISRS Level III or ECITB Advanced Level Certification</li></ul> <strong>Experience</strong><ul><li>Minimum 10 years of Oil &amp; Gas industry experience</li><li>At least 5 years in a Senior Supervisory role</li><li>Experience with Onshore and Offshore construction projects</li><li>Ability to review engineered scaffolding designs</li><li>Strong knowledge of NASC TG20 Technical Guidance</li><li>Familiarity with QatarEnergy LNG standards is advantageous</li></ul> <strong>Skills</strong><ul><li>Strong leadership and communication skills</li><li>Excellent problem-solving abilities</li><li>Effective stakeholder coordination and interface management</li><li>Computer literacy and proficiency in MS Office applications</li><li>Fluent in written and spoken English</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Project Engineer is the hands-on delivery lead for internally managed projects across Place Vendome. The role converts operational needs into defined scopes, coordinated designs, executable work programmes and completed works, with particular emphasis on live-site investigation, stakeholder coordination, field supervision, change control and close-out. The initial focus will include major external traffic-flow, access, parking and internal vehicle-routing initiatives, together with associated wayfinding and signage reorganization. AutoCAD production and stewardship of the Place Vendome (PVQ) drawing archive are essential supporting duties, while the primary accountability remains successful project delivery.</p><p><strong>Key Responsibilities</strong></p><p>1. Project Planning and Delivery</p><p>Take assigned projects from brief through feasibility, design, procurement, implementation, testing, handover and close-out. Prepare clear project briefs, scopes of work, deliverables, responsibility matrices, programmes, budgets, risk registers and approval schedules. Own day-to-day coordination and maintain current action, decision, risk, change and issue logs; escalate material concerns early with practical recommendations. Coordinate consultants, contractors, suppliers and internal departments; chair project meetings and issue concise minutes with named owners and due dates. Support tendering through site information, technical packages, bidder clarifications and technical evaluations; monitor commitments, variations and progress against approved scope and budget. Verify completed work on site, manage snagging and ensure warranties, approvals, handover files and as-built information are complete before closure.</p><p>2. Traffic, Parking, Circulation and Signage</p><p>Lead field surveys and site observations covering vehicle routes, entrances and exits, queues, conflict points, pedestrian interfaces, loading, taxi and valet operations, emergency access and peak-period conditions. Coordinate traffic studies and translate findings into workable external road, access, parking and internal vehicle-routing proposals for stakeholder review. Develop phased implementation and temporary traffic-management plans that protect customer access, mall operations, emergency routes and business continuity. Create and maintain coordinated sign-location plans, message schedules and wayfinding packages aligned with approved traffic changes and PVQ brand standards. Conduct field checks, measurements, photo records, mock-up reviews and post-implementation observations; correct discrepancies between drawings and actual conditions. Coordinate with Operations, Security, HSE, Facilities, Marketing/Branding, Leasing, valet teams, consultants and relevant authorities.</p><p>3. Design Coordination and Technical Assurance</p><p>Review architectural, civil, structural, MEP, life-safety, parking, traffic and signage information for completeness, coordination, buildability and operational impact. Challenge designs against verified site conditions and identify missing information or practical constraints before work reaches site. Prepare marked-up drawings, sketches, technical details, quantities and presentation material to communicate requirements and support approvals. Ensure proposed works address applicable codes, HSE requirements, accessibility, fire and life safety, mall standards, permits and authority requirements. Plan work in occupied areas with appropriate permits, isolations, logistics, protection, housekeeping and reinstatement controls.</p><p>4. AutoCAD and Drawing-Archive Stewardship</p><p>Use AutoCAD proficiently to prepare or revise site plans, circulation layouts, signage plans, coordination drawings and as-built records. Administer the PVQ drawing archive, drawing register, folder structure, naming conventions, metadata, revision control, issue status and access permissions. Maintain a controlled distinction between concept, review, approved-for-construction and as-built information, preventing obsolete drawings from being used. Check consultant and contractor submissions for CAD quality, coordinates, layers, references, completeness and compliance with PVQ standards before acceptance. Close every project with verified native CAD files, PDFs, approved changes and accurate as-built drawings; retrieve and issue reliable records promptly to authorized users.</p><p>5. Reporting and Team Contribution</p><p>Provide concise weekly reporting on progress, look-ahead activities, cost, risks, decisions and required management support. Maintain professional project records and an auditable trail of instructions, approvals, submittations, inspections, changes and handover documents. Support other Design &amp; Projects assignments when operational priorities require, while retaining ownership of agreed project deliverables.</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications &amp; Experience</h2><ul><li>Bachelor's degree in Civil Engineering, Architectural Engineering, Construction Management or a related discipline.</li><li>At least 7 years of relevant experience, including a minimum of 4 years of hands-on responsibility for delivering refurbishment, civil, infrastructure or operational projects.</li><li>Demonstrated project-delivery experience within a complex live commercial asset.</li><li>Shopping mall, traffic, parking, access, wayfinding or signage experience is strongly preferred.</li><li>Advanced working proficiency in AutoCAD, including confident review and production of coordinated 2D drawings.</li><li>Experience administering drawing registers, CAD archives, document-control workflows and as-built close-out.</li><li>PMP, PRINCE2 or an equivalent project-management certification is preferred.</li><li>MMUP/UPDA registration may be required where mandated by the assigned professional duties.</li><li>Qatar/GCC project experience and a valid driving licence are advantageous.</li></ul><h2>Technical &amp; Behavioural Competencies</h2><ul><li>Project controls: practical scheduling, budgeting, risk management, change control, procurement support and close-out.</li><li>Field orientation: comfortable spending substantial time on site, taking measurements, validating conditions and resolving issues directly.</li><li>Technical judgement: able to read and challenge multidisciplinary drawings and convert design information into executable work.</li><li>Communication: clear written reporting, effective meeting leadership, stakeholder management and confident contractor direction.</li><li>Ownership: organized, decisive and persistent in follow-up, with accountability for outcomes rather than coordination activity alone.</li><li>Digital capability: AutoCAD, Microsoft Project or equivalent scheduling software, Excel, PowerPoint and electronic document-management systems; BIM/Revit familiarity is advantageous.</li></ul>

<p>Accountable for the technical integrity of the engineering and design activities within the Rotating equipment discipline and for ensuring that safe, cost efficient and on-time design is developed for the project. Be responsible for and provide direction to the technical services in the Rotating engineering elements of the project scope, with special attention to the Design Basis, EPIC scope preparation and execution, design/safety/operations reviews, procurement of Equipment, factory acceptance test, vendor selection, and timely resolution of technical and engineering issues, in coordination with Engineering Manager, other discipline Heads and relevant stakeholders. Be the project's technical expert (TA-2) in the Rotating equipment discipline and will have Technical Authority for disciplines under his organisation. Will have the authority, depending upon their level of expertise/delegated authority, to approve any deviation from DEM-1 (Shall PS). However, they need to discuss the deviation with their reporting line i.e. Department Assistant Managers in Doha for their consent before giving their approval to any deviation to DEM-1 requirements. However, if a technical deviation is beyond their authority level, then they are required to engage relevant (TA- 1), essentially department Assistant Managers, for their review and approval of deviations to DEM-1 requirements. Responsible to provide sufficient information and technical justification to the Engineering Manager for any technical deviation for his final decision. Engineering Manager will have the delegated TA0 authority for final approval of any technical deviation. Responsible to thoroughly investigate any proposed technical deviation and ensure that the deviation doesn't compromise any safety in design but is helpful to optimise the design, improve the availability &amp; operability of the facilities and will optimise project cost without impacting timely Project delivery. Ensure that risks associated with the technical deviations are as low as reasonably possible (ALARP) and properly documented. Lead the Rotating equipment team in developing design scope and ensure that all related deliverables are in compliance with the applicable codes, standards, Project and Corporate requirements and procedures. Coordination of all engineering related reviews including Design Reviews (ITR/PSDR/DRR etc.), ENVID, HAZID, HAZOP, SIL, Bowties, ALARP, SAFOP, SIMOPS, 3D model reviews and Constructability etc. To ensure that all the relevant documents are in place to carry out these reviews effectively and efficiently. Coordinate and align the Rotating discipline interfaces between the project phases and direct the contractors design efforts accordingly taking into account safety, start-up, cost and constructability impacts. Establish professional work relationships with EPIC contractor, represents interest and direct contractors with any technical queries and interpretation of scope, specifications and standards. Maintain an overview of the project Rotating capability and highlight to Engineering Manager any critical resourcing issues. Participate in Project Assurance reviews and Audits and ensure findings are effectively closed out. Provide technical guidance and prepare the Rotating engineering specific elements for the EPIC tender, procurement activities, technical bid evaluation, technical queries raised by contractors. Participate in Technical bid evaluation and provide necessary guidance in selecting the EPIC Contractors. Lead the selection of suitable technology, equipment, field devices, and other Rotating specific systems as per design, evaluate options and select best techno-economic solutions for project facilities. Endorse the Rotating design calculation reports, system studies, design philosophies, software model input and output, drawings, data bases, specifications and vendor data. Provide technical guidance during engineering stages of the project and monitor the implementation of QA/QC processes, in order to achieve deliverables and facilities that meet project requirements. Provide guidance and support to conduct Safety and Design Reviews in coordination with other discipline Heads and Rotating Engineers. Supervise team members and support the development of Qatari Nationals by ensuring that they receive proper job training and development.</p><p><strong>Desired Candidate Profile</strong></p><p>Sc. degree or Higher in Mechanical Engineering from a recognized university; higher degree would be advantageous. Membership of a relevant recognized professional engineering association/institution is preferable. A minimum of 15 years' experience in Rotating engineering design in Oil &amp; Gas Industry, with an Oil &amp; Gas Company or Contractor/Consultant, of which at least 10 years should have been in offshore Oil &amp; Gas processing projects. Of the 15 years' experience, a minimum of 8 years should have been a senior Rotating Engineer in a major project and a minimum of 7 years as Lead Discipline in design of major projects in a reputable engineering consultant, EPIC contractors or Oil &amp; Gas Company. Fully familiar with Shell DEP's and other international design codes and standards. Fully familiar with Mechanical Engineering software's and design review. Familiar with all types of EPIC deliverables, equipment, design and construction progress reviews. Proven ability to manage respective discipline engineering team in a major project environment. Fundamental knowledge to level of "proficient" or preferably level of " mastery" in respective discipline engineering with added strength in the other disciplines to level of " developed". Strong technical, planning, communication, reporting and leadership skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Principal: Qatar District Cooling Company</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>To lead and supervise pipeline pre-commissioning activities of green &amp; brown field projects related to pipelines, spools, installation, Tie-in, spools, riser operations including flooding, cleaning, gauging, hydrostatic testing, inline inspection, dewatering and nitrogen purging.</li> </ul><br><ul> <li>Manage Contractors full pipeline pre commissioning and decommissioning scope from engineering planning through offshore execution and closeout.</li> <li>Review and approve contractors pre commissioning and decommissioning philosophies, execution strategies, and method statements.</li> <li>Coordinate activities related to pipeline pre-commissioning and decommissioning such as Flooding, Cleaning, Gauging, Hydrotesting, Dewatering, Drying and N2 purging whereas for de-commissioning - Pipeline isolation, Depressurization, Flushing, Cleaning, Subsea Pipeline cutting, Pipeline recovery, Abandonment in place, Grouting or capping, Spool removal, Subsea tie-in disconnection.</li> <li>Review contractors engineering calculations for Hydrotest pressure, Test duration, Fill volumes, Pig train configuration, Dewatering flow rates, Drying acceptance criteria, Nitrogen requirements, Compressor capacity, Pump sizing, Temporary equipment requirements</li> <li>Support engineering teams in defining decommissioning boundaries, pipeline status, contents, and isolation requirements.</li> <li>Ensure contractor's pre commissioning and decommissioning activities are planned in line with SIMOPS, HSE, environmental, and marine requirements.</li> <li>Coordinate with contractors, offshore operations, offshore VMT, diving, ROV, marine, and HSE teams for safe execution.</li> <li>Manage punch lists, technical queries, site queries, and non-conformances related to pipeline pre-commissioning and de commissioning.</li> <li>Act as the office-based focal point for offshore pipeline decommissioning and pre-commissioning activities and support offshore teams with technical guidance, troubleshooting, and decision-making during execution.</li> <li>Provide technical support for offshore changes, deviations, unexpected field conditions and formulating recovery plans including Management of Change</li> </ul><br><ul> <li>Bachelor's degree in engineering in mechanical engineering or subsea engineering.</li> <li>8 years offshore installation experience on vessels in Transport &amp; Installation activities with minimum 1 years as supervisory role in related field.</li> <li>5 years experience as Field Engineer or site supervisor onboard installation vessels for similar activities with emphasis on decommissioning of subsea facilities.</li> <li>Previous work experience with other major operators or LNG and knowledge of QELNG PTW systems is desirable but not mandatory.</li> <li>Extensive Knowledge in subsea pipeline pre commissioning and de commissioning, pipeline pigging, subsea isolation plugs, subsea decommissioning tools.</li> <li>Demonstrate extensive experience of pre-commissioning vessel supervision and Familiarity with international standards such as DNVST-F101, ASME B31.4, ASME B31.8, API standards, ISO pipeline and offshore standards, any Client-specific offshore standard</li> <li>Expertise in submarine pipeline decommissioning, including the use of technical plugs (e.g., STATS company isolation plugs) for safe isolation and abandonment.</li> <li>Fluent English</li> <li>MS Office proficiency</li> <li>High-pressure environment experience</li> <li>Problem solving ability</li> <li>Team collaboration.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>To lead and supervise pipeline pre-commissioning activities of green &amp; brown field projects related to pipelines, spools, installation, Tie-in, spools, riser operations including flooding, cleaning, gauging, hydrostatic testing, inline inspection, dewatering and nitrogen purging. </li> </ul><br><ul> <li>Manage Contractors full pipeline pre commissioning and decommissioning scope from engineering planning through offshore execution and closeout.</li> <li>Review and approve contractors pre commissioning and decommissioning philosophies, execution strategies, and method statements.</li> <li>Coordinate activities related to pipeline pre-commissioning and decommissioning such as Flooding, Cleaning, Gauging, Hydrotesting, Dewatering, Drying and N2 purging whereas for de-commissioning - Pipeline isolation, Depressurization, Flushing, Cleaning, Subsea Pipeline cutting, Pipeline recovery, Abandonment in place, Grouting or capping, Spool removal, Subsea tie-in disconnection.</li> <li>Review contractors engineering calculations for Hydrotest pressure, Test duration, Fill volumes, Pig train configuration, Dewatering flow rates, Drying acceptance criteria, Nitrogen requirements, Compressor capacity, Pump sizing, Temporary equipment requirements</li> <li>Support engineering teams in defining decommissioning boundaries, pipeline status, contents, and isolation requirements.</li> <li>Ensure contractor's pre commissioning and decommissioning activities are planned in line with SIMOPS, HSE, environmental, and marine requirements.</li> <li>Coordinate with contractors, offshore operations, offshore VMT, diving, ROV, marine, and HSE teams for safe execution.</li> <li>Manage punch lists, technical queries, site queries, and non-conformances related to pipeline pre-commissioning and de commissioning.</li> <li>Act as the office-based focal point for offshore pipeline decommissioning and pre-commissioning activities and support offshore teams with technical guidance, troubleshooting, and decision-making during execution.</li> <li>Provide technical support for offshore changes, deviations, unexpected field conditions and formulating recovery plans including Management of Change</li> </ul><br><ul> <li>Bachelor's degree in engineering in mechanical engineering or subsea engineering.</li> <li>8 years offshore installation experience on vessels in Transport &amp; Installation activities with minimum 1 years as supervisory role in related field.</li> <li>5 years experience as Field Engineer or site supervisor onboard installation vessels for similar activities with emphasis on decommissioning of subsea facilities.</li> <li>Previous work experience with other major operators or LNG and knowledge of company PTW systems is desirable but not mandatory.</li> <li>Extensive Knowledge in subsea pipeline pre commissioning and de commissioning, pipeline pigging, subsea isolation plugs, subsea decommissioning tools.</li> <li>Demonstrate extensive experience of pre-commissioning vessel supervision and Familiarity with international standards such as DNVST-F101, ASME B31.4, ASME B31.8, API standards, ISO pipeline and offshore standards, any Client-specific offshore standard</li> <li>Expertise in submarine pipeline decommissioning, including the use of technical plugs (e.g., STATS company isolation plugs) for safe isolation and abandonment.</li> <li>Fluent English</li> <li>MS Office proficiency</li> <li>High-pressure environment experience</li> <li>Problem solving ability</li> <li>Team collaboration.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>Field Operator - ( 2 )</p><p>Principal: Qatar District Cooling Company</p><p>Safety Observation</p><p>Raise SO in CMMS when found during shift.</p><p>Security Rounds:</p><p>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:</p><p>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response</p><p>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System</p><p>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO</p><p>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:</p><p>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:</p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:</p><p>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:</p><p>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis</p><p>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:</p><p>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization</p><p>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:</p><p>Respond to any alarms or alerts and take necessary corrective actions.</p><p>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management</p><p>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems</p><p>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras</p><p>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).</p><p>Occasionally attend site visits by visitors or contractors.</p><p>Perform any other duty as assigned by the Plant Operations Supervisor</p><p>For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position.</p><ul ><li >Candidates must have at least Vocational Diploma / Short Course Certificate</li><li >The job requires Male applicants.</li><li >Minimum of 5 years working experience is required for this position</li><li >Safety Observation<br>Raise SO in CMMS when found during shift.</li><li >Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li >Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li >Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li >PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li >Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li >Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li >Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li >System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li >System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li >Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li >Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li >Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li >Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li >Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li >Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li >Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Additional Qualifications:</strong></p><ul><li><strong>Safety Observation</strong><br>Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong><br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong><br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong><br>Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong><br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong><br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong><br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong><br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong><br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong><br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong><br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong><br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong><br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong><br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong><br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong><br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong><br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>