Electrical Drafts Man Jobs in Qatar

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>The Buggy Technician is responsible for the inspection, maintenance, troubleshooting, and repair of electric and gasoline-powered buggies/golf carts used in operations, hospitality, events, resorts, airports, or industrial facilities.<br><br>Key Responsibilities<br><br>Perform preventive maintenance on buggies/golf carts. Diagnose electrical, mechanical, and hydraulic faults. Repair batteries, motors, controllers, brakes, steering, suspension, and lighting systems. Conduct routine inspections and safety checks. Replace defective parts and components. Maintain charging systems and battery health. Keep maintenance records and service reports updated. Ensure vehicles are clean, operational, and available for daily use. Respond quickly to breakdowns and emergency repair requests. Follow workplace safety and manufacturer guidelines.<br><br>Qualifications<br><br>Diploma/ITI in Mechanical or Electrical Engineering preferred. Experience in golf cart, buggy, or small vehicle maintenance. Knowledge of electric vehicle systems and battery troubleshooting. Ability to use diagnostic tools and repair equipment. Basic understanding of wiring diagrams and technical manuals. Valid driving license preferred.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!

The <strong>Electrical Power Production Section Lead</strong> installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br><strong>Essential Job Functions<br><br></strong><ul><li>Installs and operates electrical power plants, distribution equipment, automatic transfer panels.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment.</li><li>Modifies equipment according to technical publications. Accomplishes operating and repair tasks.</li><li>Checks installed equipment to ensure compliance with publications, policies and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators.</li><li>Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains and repairs electrical power generating equipment, automatic transfer panels.</li><li>Performs inspections. Interprets inspection findings and determines corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters. Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating systems to prevent potential systems failure.</li><li>Advises on problems installing and repairing electrical power production equipment.</li><li>Solves maintenance problems.</li><li>Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics.</li><li>Develops and establishes maintenance and operating procedures to ensure maximum efficiency.</li><li>Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies.</li><li>Performs other duties as required<br><br></li></ul><strong>Education &amp; Experience<br><br></strong><ul><li>High School diploma or equivalent.</li><li>A minimum of 10 (ten) years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. </li><li>Task-certified 7-Level AAS Power Pro </li><li></li><li>Completion of a basic electrical power production course in the military, trade school or Union shop is desired.<br><br></li></ul><strong>Knowledge &amp; Skills<br><br></strong><ul><li>Must possess strong organizational skills with an attention to detail and follow up.</li><li>Must be able to multi-task in a fast-paced environment.</li><li>Must be customer service oriented.</li><li>Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point.</li><li>Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br></li></ul><strong>Additional Requirements<br><br></strong><ul><li>Must possess a valid U.S. Driver’s License</li><li>Possess a valid U.S. Passport (preferred)</li><li>Able to obtain and maintain a valid Residency Visa for Qatar</li><li>Must be able to work in extreme environmental conditions including dust and high temperatures.</li><li>Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br></li></ul><strong>TRAVEL: </strong>100%, in deployed location.<br><br><strong>SECURITY CLEARANCE: </strong>Must have and maintain a DoD Secret Clearance.<br><br><strong>Intrepid Acquisition Holdings, LLC<br><br></strong><strong>www.intrepidgs.com<br><br></strong>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The <strong>Alternate Electrical Power Production Section Lead</strong> installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br><strong>Essential Job Functions<br><br></strong><ul><li>Installs and operates electrical power plants, distribution equipment, automatic transfer panels.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment.</li><li>Modifies equipment according to technical publications. Accomplishes operating and repair tasks.</li><li>Checks installed equipment to ensure compliance with publications, policies and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators.</li><li>Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains and repairs electrical power generating equipment, automatic transfer panels.</li><li>Performs inspections. Interprets inspection findings and determines corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters. Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating systems to prevent potential systems failure.</li><li>Advises on problems installing and repairing electrical power production equipment.</li><li>Solves maintenance problems.</li><li>Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics.</li><li>Develops and establishes maintenance and operating procedures to ensure maximum efficiency.</li><li>Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies.</li><li>Performs other duties as required<br><br></li></ul><strong>Education &amp; Experience<br><br></strong><ul><li>High School diploma or equivalent.</li><li>A minimum of 10 (ten) years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. </li><li>Task-certified 7-Level AAS Power Pro <br><br></li></ul><strong>License &amp; Certifications<br><br></strong><ul><li>Valid Driver’s License and be able to operate a vehicle with a manual transmission.</li><li>Must have a Valid US Passport.<br><br></li></ul><strong>Knowledge &amp; Skills<br><br></strong><ul><li>Must possess strong organizational skills with attention to detail and follow up.</li><li>Must be able to multi-task in a fast-paced environment.</li><li>Must be customer service oriented.</li><li>Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point.</li><li>Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br></li></ul><strong>Additional Requirements<br><br></strong><ul><li>Must possess a valid U.S. Driver’s License</li><li>Possess a valid U.S. Passport (preferred)</li><li>Able to obtain and maintain a valid Residency Visa for Qatar</li><li>Must be able to work in extreme environmental conditions including dust and high temperatures.</li><li>Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br></li></ul><strong>TRAVEL: </strong>100%, in deployed location.<br><br><strong>SECURITY CLEARANCE: </strong>Must have and maintain a DoD Secret Clearance.<br><br><strong>Intrepid Acquisition Holdings, LLC<br><br></strong><strong>www.intrepidgs.com<br><br></strong>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The <strong>Electrical Power Production Technician </strong>installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br><strong>Essential Job Functions<br><br></strong><ul><li>Installs and operates electrical power plants, distribution equipment, automatic transfer panels.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment.</li><li>Modifies equipment according to technical publications. Accomplishes operating and repair tasks.</li><li>Checks installed equipment to ensure compliance with publications, policies and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators.</li><li>Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains and repairs electrical power generating equipment, automatic transfer panels.</li><li>Performs inspections. Interprets inspection findings and determines corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters. Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating systems to prevent potential systems failure.</li><li>Advises on problems installing and repairing electrical power production equipment.</li><li>Solves maintenance problems.</li><li>Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics.</li><li>Develops and establishes maintenance and operating procedures to ensure maximum efficiency.</li><li>Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies.</li><li>Performs other duties as required<br><br></li></ul><strong>Education &amp; Experience<br><br></strong><ul><li>High School diploma or equivalent.</li><li>A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. </li><li>Task-certified 5-Level AAS Power Pro<br><br></li></ul><strong>Knowledge &amp; Skills<br><br></strong><ul><li>Must possess strong organizational skills with attention to detail and follow up.</li><li>Must be able to multi-task in a fast-paced environment.</li><li>Must be customer service oriented.</li><li>Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point.</li><li>Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br></li></ul><strong>Additional Requirements<br><br></strong><ul><li>Must possess a valid U.S. Driver’s License</li><li>Possess a valid U.S. Passport (preferred)</li><li>Able to obtain and maintain a valid Residency Visa for Qatar</li><li>Must be able to work in extreme environmental conditions including dust and high temperatures.</li><li>Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br></li></ul><strong>TRAVEL: </strong>100%, in deployed location.<br><br><strong>SECURITY CLEARANCE: </strong>Must have and maintain a DoD Secret Clearance.<br><br><strong>Intrepid Acquisition Holdings, LLC<br><br></strong><strong>www.intrepidgs.com<br><br></strong>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The <strong>Electrical Power Production Technician </strong>installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br><strong>Essential Job Functions<br><br></strong><ul><li>Installs and operates electrical power plants, distribution equipment, automatic transfer panels.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment.</li><li>Modifies equipment according to technical publications. Accomplishes operating and repair tasks.</li><li>Checks installed equipment to ensure compliance with publications, policies and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators.</li><li>Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains and repairs electrical power generating equipment, automatic transfer panels.</li><li>Performs inspections. Interprets inspection findings and determines corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters. Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating systems to prevent potential systems failure.</li><li>Advises on problems installing and repairing electrical power production equipment.</li><li>Solves maintenance problems.</li><li>Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics.</li><li>Develops and establishes maintenance and operating procedures to ensure maximum efficiency.</li><li>Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies.</li><li>Performs other duties as required<br><br></li></ul><strong>Education &amp; Experience<br><br></strong><ul><li>High School diploma or equivalent.</li><li>A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. </li><li>Task-certified 5-Level AAS Power Pro<br><br></li></ul><strong>Knowledge &amp; Skills<br><br></strong><ul><li>Must possess strong organizational skills with attention to detail and follow up.</li><li>Must be able to multi-task in a fast-paced environment.</li><li>Must be customer service oriented.</li><li>Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point.</li><li>Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br></li></ul><strong>Additional Requirements<br><br></strong><ul><li>Must possess a valid U.S. Driver’s License</li><li>Possess a valid U.S. Passport (preferred)</li><li>Able to obtain and maintain a valid Residency Visa for Qatar</li><li>Must be able to work in extreme environmental conditions including dust and high temperatures.</li><li>Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br></li></ul><strong>TRAVEL: </strong>100%, in deployed location.<br><br><strong>SECURITY CLEARANCE: </strong>Must have and maintain a DoD Secret Clearance.<br><br><strong>Intrepid Acquisition Holdings, LLC<br><br></strong><strong>www.intrepidgs.com<br><br></strong>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The <strong>Electrical Power Production Technician </strong>installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br><strong>Essential Job Functions<br><br></strong><ul><li>Installs and operates electrical power plants, distribution equipment, automatic transfer panels.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment.</li><li>Modifies equipment according to technical publications. Accomplishes operating and repair tasks.</li><li>Checks installed equipment to ensure compliance with publications, policies and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators.</li><li>Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains and repairs electrical power generating equipment, automatic transfer panels.</li><li>Performs inspections. Interprets inspection findings and determines corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters. Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating systems to prevent potential systems failure.</li><li>Advises on problems installing and repairing electrical power production equipment.</li><li>Solves maintenance problems.</li><li>Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics.</li><li>Develops and establishes maintenance and operating procedures to ensure maximum efficiency.</li><li>Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies.</li><li>Performs other duties as required<br><br></li></ul><strong>Education &amp; Experience<br><br></strong><ul><li>High School diploma or equivalent.</li><li>A minimum of 5 years’ experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. </li><li>Task-certified 5-Level AAS Power Pro<br><br></li></ul><strong>Knowledge &amp; Skills<br><br></strong><ul><li>Must possess strong organizational skills with attention to detail and follow up.</li><li>Must be able to multi-task in a fast-paced environment.</li><li>Must be customer service oriented.</li><li>Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point.</li><li>Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems.<br><br></li></ul><strong>Additional Requirements<br><br></strong><ul><li>Must possess a valid U.S. Driver’s License</li><li>Possess a valid U.S. Passport (preferred)</li><li>Able to obtain and maintain a valid Residency Visa for Qatar</li><li>Must be able to work in extreme environmental conditions including dust and high temperatures.</li><li>Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br></li></ul><strong>TRAVEL: </strong>100%, in deployed location.<br><br><strong>SECURITY CLEARANCE: </strong>Must have and maintain a DoD Secret Clearance.<br><br><strong>Intrepid Acquisition Holdings, LLC<br><br></strong><strong>www.intrepidgs.com<br><br></strong>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Company Description:<br> PROTECTION AUTOMATION AND CONTROL SERVICES (PACS) is a Qatar-based company specializing in power system protection and control services. Led by a highly experienced technical team with decades of expertise in transmission, distribution, substation automation, and system fault analysis, PACS focuses on EHV, HV, MV, and LV networks,Dedicated to advanced power system activities, including maintenance,Pre-commissioning,Fault rectification. PACS supports commercial and industrial clients with services such as protection relay settings, load flow and short circuit studies, system troubleshooting, and remedial action proposals. The company has contributed to many major projects in Qatar, including work for Qatar Foundation, FIFA stadiums, leading hotels, universities, medical facilities, and large-scale infrastructure developments.<br><br>Role Description:<br>The Protection Engineer role is a full-time, on-site position based in Doha. The Protection Engineer will be responsible for designing, reviewing, and implementing protection schemes for EHV, HV, MV, and LV systems, including relay settings and coordination studies. Day-to-day tasks include performing protection system maintenance, pre-commissioning and end-to-end testing, fault analysis, and preparing technical reports and documentation. The role involves supporting substation and industrial electrical system, troubleshooting substation equipment and protection issues. The Protection Engineer will collaborate with project teams and clients to ensure safe, reliable, and compliant operation of electrical networks and participate in site visits, inspections, and commissioning activities. <br><br>Qualifications:<br>Minimum 5 years of relevant experience required.<br>Strong knowledge of power system protection principles, relay coordination, and fault analysis for EHV, HV, MV, and LV networks.<br>Experience with protection relay configuration, testing, and commissioning, including pre-commissioning, end-to-end testing, and final trip tests.<br>Proficiency in substation industrial electrical system control and monitoring.<br>Knowledge of power system studies, including load flow, short circuit analysis, and power quality assessment.<br>Familiarity with troubleshooting of substation plant equipment protection systems.<br>Bachelor’s degree in Electrical Engineering; advanced qualifications or certifications in power system protection an advantage.<br>Relevant experience in utility, industrial, or consultancy environments, preferably within the Middle East or similar power system context.<br>Strong analytical, problem-solving, and technical report writing skills, with attention to detail and safety standards.<br>Ability to work on-site in Doha, collaborate with multidisciplinary teams, and communicate effectively with clients and stakeholders

We are looking for an experienced Machine Operator to join our production team on an urgent basis.<br><br>The successful candidate will be responsible for operating digital printing and fabrication machinery, preparing print-ready files, performing finishing works, maintaining equipment, and ensuring high-quality production for branding, events, exhibitions, signage, and fabrication projects.<br><br>Key Responsibilities<br><br>Operate large and small-format digital printers, including UV, solvent, eco-solvent, and latex printers. Operate CNC routers, plotters, laser cutters, laminators, and other finishing equipment. Prepare substrates, inks, and materials according to job requirements. Perform test prints and make adjustments for alignment, sizing, and colour accuracy. Carry out cutting, trimming, laminating, mounting, routing, and assembly works. Handle materials such as vinyl, acrylic, MDF, foam board, aluminum, PVC, fabric, and paper. Prepare and modify artwork using Adobe Illustrator, Photoshop, and InDesign. Prepare and verify print-ready files including AI, PDF, PSD, and EPS formats. Operate RIP software and manage production queues. Perform basic colour calibration, profiling, and quality checks. Troubleshoot minor machine, mechanical, and software-related issues. Carry out routine machine cleaning, calibration, and preventive maintenance. Follow all HSE and production quality requirements. Coordinate with designers, production teams, and project managers to ensure accurate job execution. Maintain production records and monitor material and consumable usage. Support urgent projects, exhibitions, installations, and high-demand production periods.<br><br>Requirements<br><br>Technical Diploma or certification in Printing Technology, Graphic Arts, Manufacturing, or a related field. Proven experience as a Digital Print Operator, CNC Operator, Fabrication Technician, or similar role. Strong practical knowledge of digital printing and fabrication machinery. Proficiency in Adobe Illustrator and Photoshop; basic InDesign knowledge is preferred. Experience with RIP software and print production workflows. Knowledge of colour management and print quality control. Ability to read artworks, layouts, technical drawings, and job instructions. Basic mechanical troubleshooting skills. Experience in signage, advertising, events, exhibitions, or fabrication is an advantage. Strong attention to detail and ability to work under tight deadlines. Physically capable of handling production materials and working extended hours when required. Good teamwork, communication, and time-management skills.<br><br>Availability: Immediate joiners.

We are looking for an experienced Digital Print & Fabrication Operator to join our production team on an urgent basis.<br><br>The successful candidate will be responsible for operating digital printing and fabrication machinery, preparing print-ready files, performing finishing works, maintaining equipment, and ensuring high-quality production for branding, events, exhibitions, signage, and fabrication projects.<br><br>Key Responsibilities<br><br>Operate large and small-format digital printers, including UV, solvent, eco-solvent, and latex printers. Operate CNC routers, plotters, laser cutters, laminators, and other finishing equipment. Prepare substrates, inks, and materials according to job requirements. Perform test prints and make adjustments for alignment, sizing, and colour accuracy. Carry out cutting, trimming, laminating, mounting, routing, and assembly works. Handle materials such as vinyl, acrylic, MDF, foam board, aluminum, PVC, fabric, and paper. Prepare and modify artwork using Adobe Illustrator, Photoshop, and InDesign. Prepare and verify print-ready files including AI, PDF, PSD, and EPS formats. Operate RIP software and manage production queues. Perform basic colour calibration, profiling, and quality checks. Troubleshoot minor machine, mechanical, and software-related issues. Carry out routine machine cleaning, calibration, and preventive maintenance. Follow all HSE and production quality requirements. Coordinate with designers, production teams, and project managers to ensure accurate job execution. Maintain production records and monitor material and consumable usage. Support urgent projects, exhibitions, installations, and high-demand production periods.<br><br>Requirements<br><br>Technical Diploma or certification in Printing Technology, Graphic Arts, Manufacturing, or a related field. Proven experience as a Digital Print Operator, CNC Operator, Fabrication Technician, or similar role. Strong practical knowledge of digital printing and fabrication machinery. Proficiency in Adobe Illustrator and Photoshop; basic InDesign knowledge is preferred. Experience with RIP software and print production workflows. Knowledge of colour management and print quality control. Ability to read artworks, layouts, technical drawings, and job instructions. Basic mechanical troubleshooting skills. Experience in signage, advertising, events, exhibitions, or fabrication is an advantage. Strong attention to detail and ability to work under tight deadlines. Physically capable of handling production materials and working extended hours when required. Good teamwork, communication, and time-management skills.<br><br>Availability: Immediate joiners.

We are looking for an experienced Machine Operator to join our production team on an urgent basis.<br><br>The successful candidate will be responsible for operating digital printing and fabrication machinery, preparing print-ready files, performing finishing works, maintaining equipment, and ensuring high-quality production for branding, events, exhibitions, signage, and fabrication projects.<br><br>Key Responsibilities<br><br>Operate large and small-format digital printers, including UV, solvent, eco-solvent, and latex printers. Operate CNC routers, plotters, laser cutters, laminators, and other finishing equipment. Prepare substrates, inks, and materials according to job requirements. Perform test prints and make adjustments for alignment, sizing, and colour accuracy. Carry out cutting, trimming, laminating, mounting, routing, and assembly works. Handle materials such as vinyl, acrylic, MDF, foam board, aluminum, PVC, fabric, and paper. Prepare and modify artwork using Adobe Illustrator, Photoshop, and InDesign. Prepare and verify print-ready files including AI, PDF, PSD, and EPS formats. Operate RIP software and manage production queues. Perform basic colour calibration, profiling, and quality checks. Troubleshoot minor machine, mechanical, and software-related issues. Carry out routine machine cleaning, calibration, and preventive maintenance. Follow all HSE and production quality requirements. Coordinate with designers, production teams, and project managers to ensure accurate job execution. Maintain production records and monitor material and consumable usage. Support urgent projects, exhibitions, installations, and high-demand production periods.<br><br>Requirements<br><br>Technical Diploma or certification in Printing Technology, Graphic Arts, Manufacturing, or a related field. Proven experience as a Digital Print Operator, CNC Operator, Fabrication Technician, or similar role. Strong practical knowledge of digital printing and fabrication machinery. Proficiency in Adobe Illustrator and Photoshop; basic InDesign knowledge is preferred. Experience with RIP software and print production workflows. Knowledge of colour management and print quality control. Ability to read artworks, layouts, technical drawings, and job instructions. Basic mechanical troubleshooting skills. Experience in signage, advertising, events, exhibitions, or fabrication is an advantage. Strong attention to detail and ability to work under tight deadlines. Physically capable of handling production materials and working extended hours when required. Good teamwork, communication, and time-management skills.<br><br>Availability: Immediate joiners.

<br><ul><li><p>Experience supervising installation of diesel, electric and jockey fire pumps.</p></li><li><p>Knowledge of fire pump room layouts, piping, valves, controllers and accessories.</p></li><li><p>Experience in site execution, manpower management and coordination with contractors.</p></li><li><p>Knowledge of NFPA 20 and Qatar Civil Defense requirements.</p></li><li><p>Ability to handle inspections, testing, commissioning and troubleshooting.</p></li><li><p>Ability to read and understand shop drawings and technical specifications.</p></li></ul><br><p><strong>Preference: Candidates with Qatar Oil & Gas, commercial building and QCDD-approved fire protection project experience.</strong></p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma / Degree in Mechanical or Electrical Engineering.</p></li><li><p>Minimum 3–5 years of relevant experience in Qatar.</p></li></ul>

Position Overview<br>- Role: Electro-Technical Officer (ETO)<br><br>- Location: Lift Boat -Qatar (Offshore)<br><br><br>Minimum Experience:<br>- Minimum 3–5 years of sea service as an ETO on offshore vessels, with at least 2 years of direct experience on lift boats, self-elevating units, or jack-up barges.<br><br>- Minimum 1 year experience in rank as ETO on DP2 Jack-Up Barges / Lift Boats.<br><br>- High Voltage equipment experience on Lift Barges.<br><br>Job-Specific Skills:<br>- Strong proficiency in PLC troubleshooting, electrical schematics reading, variable frequency drives (VFD), high-voltage (HV) safety, and hydraulic-electric interfaces.<br><br>- Independent working skills<br><br>- Electrical Preventive Maintenance skills<br><br>- Computer skills<br><br>- Fluent in English Language (reading/writing/speaking<br><br>Minimum Qualifications:<br>- Bachelor’s Degree or Higher National Diploma (HND) in Electrical Engineering, Electronics, or Marine Electro-Technology.<br><br>- Valid Electro-Technical Officer Certificate of Competency – STCW A-III/6.<br><br>- Valid national Certificate of Competency with applicable Flag State endorsement/recognition.<br><br>- High Voltage (HV) Management / Operational<br><br>- Valid DP System Manufacturer approved DP Maintenance Course.<br><br>- Valid BOSIET/FOET (with HUET).<br><br>- Valid Seafarer Medical Fitness Certificate (STCW I/9).<br><br>- Valid Basic Safety Training (STCW A-VI/1).<br><br>- Valid Survival Craft and Rescue Boats (STCW A-VI/2-1).<br><br>- Valid Advanced Fire Fighting (AFF - Reg. VI/3).<br><br>- Medical First Aid (STCW A-VI/4-1).<br><br>- Security Training (STCW A-VI/6).<br><br>- The Management Level Course (MLC) for Marine Engineer Officers (STCW A-III/2).<br><br>- Engine Room Resource Management (ERM) (STCW A-III/2).

Position Overview<br>- Role: Electro-Technical Officer (ETO)<br><br>- Location: Lift Boat -Qatar (Offshore)<br><br><br>Minimum Experience:<br>- Minimum 3–5 years of sea service as an ETO on offshore vessels, with at least 2 years of direct experience on lift boats, self-elevating units, or jack-up barges.<br><br>- Minimum 1 year experience in rank as ETO on DP2 Jack-Up Barges / Lift Boats.<br><br>- High Voltage equipment experience on Lift Barges.<br><br>Job-Specific Skills:<br>- Strong proficiency in PLC troubleshooting, electrical schematics reading, variable frequency drives (VFD), high-voltage (HV) safety, and hydraulic-electric interfaces.<br><br>- Independent working skills<br><br>- Electrical Preventive Maintenance skills<br><br>- Computer skills<br><br>- Fluent in English Language (reading/writing/speaking<br><br>Minimum Qualifications:<br>- Bachelor’s Degree or Higher National Diploma (HND) in Electrical Engineering, Electronics, or Marine Electro-Technology.<br><br>- Valid Electro-Technical Officer Certificate of Competency – STCW A-III/6.<br><br>- Valid national Certificate of Competency with applicable Flag State endorsement/recognition.<br><br>- High Voltage (HV) Management / Operational<br><br>- Valid DP System Manufacturer approved DP Maintenance Course.<br><br>- Valid BOSIET/FOET (with HUET).<br><br>- Valid Seafarer Medical Fitness Certificate (STCW I/9).<br><br>- Valid Basic Safety Training (STCW A-VI/1).<br><br>- Valid Survival Craft and Rescue Boats (STCW A-VI/2-1).<br><br>- Valid Advanced Fire Fighting (AFF - Reg. VI/3).<br><br>- Medical First Aid (STCW A-VI/4-1).<br><br>- Security Training (STCW A-VI/6).<br><br>- The Management Level Course (MLC) for Marine Engineer Officers (STCW A-III/2).<br><br>- Engine Room Resource Management (ERM) (STCW A-III/2).

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>Communication</span></span><br><span><span>Internal Communication:</span></span><br><span><span>-&nbsp; &nbsp;Maintenance Foreman</span></span><br><span><span>-&nbsp; &nbsp;Planner/Scheduler</span></span><br><span><span>-&nbsp; &nbsp;Stores</span></span><br><span><span>Purpose:</span></span><br><span><span>-&nbsp; &nbsp;Task execution and feedback</span></span><br><span><span>-&nbsp; &nbsp;Spare parts/consumables request and job closure</span></span><br><span><span>External Communication:</span></span><br><span><span>-&nbsp; &nbsp;N/A</span></span><br><span><span>Purpose:</span></span><br><span><span>-&nbsp; &nbsp;N/A</span></span><br><span><span>Occupational Health &amp; Safety and Environment</span></span><br><span><span>Accountability:</span></span><br><span><span>Are accountable for their acts and omissions.</span></span><br><span><span>Responsibility:</span></span><br><span><span>To follow agreed safe systems of work; to follow training and instructions; and to report accidents, incidents and near misses.</span></span><br><span><span>Authority:</span></span><br><span><span>To stop work if they think the work is unsafe.</span></span></p><br><br>Responsibilities:<br><p><span>Key Roles &amp; Responsibilities</span><br><span>•&nbsp; &nbsp;Diagnose and repair electrical/electronic/Air conditioners faults in Shipyard vehicles, mobile equipment, generators and Machinery.</span><br><span>•&nbsp; &nbsp;Service starting/charging systems, wiring harnesses, lighting, sensors, ECUs and CAN-based systems as applicable.</span><br><span>•&nbsp; &nbsp;Perform preventive checks and electrical inspections; rectify defects and ensure safe wiring practices.</span><br><span>•&nbsp; &nbsp;Use diagnostic scanners and multimeters to identify faults and verify repairs.</span><br><span>•&nbsp; &nbsp;Install and test electrical accessories and safety devices (beacons, cameras, alarms, interlocks) when required.</span><br><span>•&nbsp; &nbsp;Maintain job reports and update maintenance records in CMMS/work orders.</span></p><br><p><span>•Read Schematic diagram and trace wiring circuit failures.</span><br><span>• Ability to modify electric circuits using relay control when needed</span><br><span>• Ability to prepare bill of material and expected labor hours for each Job</span><br><span>•&nbsp; &nbsp;Ensure compliance with QHSSE procedures and maintain housekeeping.</span></p><br><p><span>• Perform other job-related duties as assigned</span></p><br><br>Qualifications:<br><p><span>Education &amp; Professional Qualification:</span><br><span>High School or Secondary School.</span><br><span>Professional Experience:</span><br><span>Min 2-3 years of experience in vehicle/equipment electrical troubleshooting.</span></p><br><p><br><span><span>Computer Skills:</span></span><br><span><span>Ability to use diagnostic scanners; basic computer skills.</span></span><br><span><span>Language Skills:</span></span><br><span><span>Basic English Level for daily communication; Arabic is an advantage</span></span><br><span><span>Key Skills/Knowledge:</span></span><br><span><span>- Reading wiring diagrams</span></span><br><span><span>- Fault finding</span></span><br><span><span>- Safe wiring and repair practices</span></span></p><br> </div>

Reports To: Maintenance Engineer Company: Qatar Fabrication Company Location: Ras Laffan, Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions The Maintenance Supervisor oversees a technical team of maintenance foremen and technicians to efficiently execute all maintenance work orders or job cards as directed by the Engineer/Planner. Integral to this role is ensuring strict compliance with the SAP PM plan and addressing specific site requirements for maintenance tasks. Additionally, the Supervisor is responsible for accurate data entry and completion of work orders. Solid trade knowledge and technical skills are essential for promptly attending to, addressing, and resolving equipment failures.<br>1) Site Management:Lead, mentor, and motivate a team of maintenance foremen and technicians to ensure the effective execution of maintenance tasks. Provide technical guidance and support to team members, fostering a culture of continuous improvement and collaboration.<br>For Mobile Plant equipment and Utilities:a) Responsible to maintain all Fixed equipment such as but not limited to CNC Equipment, PLC based Equipment, Hydraulic Equipment, other pre-fabrication machinery, welding machines, blasting, and painting equipment.b) Responsible for maintaining all portable equipment such as but not limited to welding machines, grinders, chipping guns, torches, welding ovens, rollers, manipulators.c) Responsible for maintaining mobile plant equipment such as but not limited to forklifts, MEWPs, cleaning machines, air compressors, generators, and other material handling equipment.d) Responsible to maintain Equipment in all the workshop facilities.e) Responsible for maintaining all mechanical utilities in all the workshop facilities and exterior of the yard such as utility lines and appliances.<br> For Transportation and Lifting Equipmenta) Responsible for the maintenance of all lifting and transportation equipment such as but not limited to electric overhead cranes, portal JIB cranes, all terrain and rough terrain mobile cranes, crawler cranes, shipyard transporters, self-propelled modular transporters.b) Responsible for the maintenance of all portable geared and powered lifting appliances such electric hoists, chain hoists, hydraulic jacks, pedestal jacks, load cells. Conduct TBT and work preparatory instructions to the workforce to ensure compliance to QFAB's QHSES requirements. Facilitate PTW requirements, energy isolation, HIT card and relevant safety measures as applicable. Collaborate with Maintenance Engineer in case of assistance required for maintenance quality measurement and use of precision or special tools.<br>2) Maintenance Work Orders Execution:Supervise the timely and efficient execution of all maintenance work orders or job cards assigned by the Engineer for the Planner group. Ensure that maintenance tasks are completed according to established procedures, safety guidelines, and quality standards. All manhours and resource utilization for the work order must be recorded in SAP PM WO followed by review of the Maintenance Engineer Provide spare parts and external service request to Maintenance Engineer for review and necessary action. Work order completion report to be submitted to Maintenance Engineer with all findings, actions and pending items if any. Adhere to department maintenance workflow process.<br>3) Compliance with SAP PM Plan:Enforce strict adherence to the SAP PM plan for maintenance activities, including scheduling, execution, and documentation. Monitor team performance to ensure compliance with work order requirements and deadlines.<br>4) Addressing Equipment Failures:Utilize solid trade knowledge and technical skills to promptly attend to, address, and resolve equipment failures. Collaborate with maintenance team members and other stakeholders to diagnose issues and implement effective solutions. Respond to breakdown notification and address the issues by troubleshooting and repair. Obtain technical guidance from Maintenance Engineer as and when required.<br>5) Data Entry and Completion:Oversee accurate data entry and completion for work orders in the SAP PM system, including updating work status and recording observations. Conduct regular verification of work order data to ensure accuracy and completeness.<br>6) Communication with work groups:Closely engage with Production supervisor for equipment malfunction, observations and cascade the information to Maintenance Engineer for improvements. Coordinate with production supervisor to align equipment availability and utilization plan to determine maintenance window and condition assessment.<br>Qualifications, Experience and Skills<br>Qualifications:Diploma with relevant years of work experience (in Mechanical/ Electrical/ Instrumentation/ Mechatronics).<br>Experience: 4+ Years of relevant industrial experience in the maintenance department.

<p>Requirements Qualifications &amp; Experience Bacheloru2019s degree/Diploma in Graphic Design, Visual Communication, Fine Arts, Marketing, or a related field . Minimum 3u20135 years of relevant experience as a Graphic Designer. Experience in corporate, real estate or marketing environments is preferred. Strong portfolio demonstrating creativity, design skills, and versatility. Experience designing content for social media and digital marketing campaigns is highly desirable. Software Skills Strong knowledge of Adobe Photoshop, Illustrator, and InDesign . Good knowledge of Canva and/or Figma . Experience with photo editing and image enhancement. Knowledge of video editing, motion graphics, and Reels is an advantage. Ability to prepare artwork for both digital and large-format printing.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications &amp; Experience Bachelor degree/Diploma in Graphic Design, Visual Communication, Fine Arts, Marketing, or a related field . Minimum 3u20135 years of relevant experience as a Graphic Designer. Experience in corporate, real estate or marketing environments is preferred. Strong portfolio demonstrating creativity, design skills, and versatility. Experience designing content for social media and digital marketing campaigns is highly desirable. Software Skills Strong knowledge of Adobe Photoshop, Illustrator, and InDesign . Good knowledge of Canva and/or Figma . Experience with photo editing and image enhancement. Knowledge of video editing, motion graphics, and Reels is an advantage. Ability to prepare artwork for both digital and large-format printing.</p>

<strong>About Four Seasons<br><br></strong>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.<br><br>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.<br><br><strong>About the location:<br><br></strong>Indulge in a glamorous beachfront home at Four Seasons Resort and Residences at The Pearl-Qatar – offering a new Four Seasons experience in Doha. Whether for a short vacation or a long-term stay, enjoy residential comfort in our expansive apartments and residences, each with a full kitchen and breathtaking views of the city or sea. Connect to the lively social scene at our seven restaurants and bars, soon to showcase Joël Robuchon, and enrich your lifestyle at our Loulou Spa, the beach and pools. Intuitive Four Seasons service sets the new standard for luxury beachfront living in Doha.<br><br><strong>About the location:<br><br></strong>Indulge in a glamorous beachfront home at Four Seasons Resort and Residences at The Pearl-Qatar – offering a new Four Seasons experience in Doha. Whether for a short vacation or a long-term stay, enjoy residential comfort in our expansive apartments and residences, each with a full kitchen and breathtaking views of the city or sea. Intuitive Four Seasons service sets the new standard for luxury beachfront living in Doha.<br><br><strong>Our Team<br><br></strong>Our team is our greatest asset and the key to our success. We demonstrate our beliefs in the way we treat each other and by the example we set for one another. In all our interactions with our guests, customers, business associates and colleagues, we seek to deal with others, as we would have them deal with us. Our team is built on mutual respect, collaboration, excellent service and passion.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Carry out preventive and corrective maintenance of the hotel’s electrical systems and equipment.</li><li>Troubleshoot and repair electrical faults, wiring, lighting, sockets, switches, and distribution boards.</li><li>Attend to electrical maintenance requests in guest rooms, public areas, kitchens, and back-of-house areas.</li><li>Conduct regular inspections and ensure all electrical systems are safe and in good working condition.</li><li>Perform electrical installations, repairs, and minor improvement works as required.</li><li>Respond promptly to electrical emergencies and breakdowns.</li><li>Maintain accurate records of maintenance work and follow hotel safety procedures.</li><li>Support the Engineering team with other maintenance duties when required.<br><br></li></ul><strong>Qualifications &amp; Experience<br><br></strong><ul><li>Technical qualification or certificate in Electrical Engineering, Electrical Installation, or a related field.</li><li>Minimum 2–3 years of experience as an electrician, preferably in a hotel or hospitality environment.</li><li>Good knowledge of electrical systems, wiring, lighting, motors, and troubleshooting.</li><li>Ability to read basic electrical drawings and wiring diagrams.</li><li>Good knowledge of electrical safety standards and preventive maintenance.</li><li>Ability to work shifts, weekends, and public holidays when required.</li><li>Good communication, teamwork, and problem-solving skills.</li><li>Requires reading, writing and oral proficiency in the English language, Arabic is an asset<br><br></li></ul><strong>What We Offer<br><br></strong>Opportunities to build a successful career with global potential<br><br>Unique strong culture - diversity of 50 different nationalities<br><br>Living accommodation in a high quality, well-resourced apartment<br><br>Excellent Training and Development opportunities<br><br>Employee Recognition Programs<br><br>Complimentary nights at FS Hotels Worldwide<br><br>Paid home leave tickets<br><br>Complimentary meals in employee restaurants<br><br>Free transportation to work<br><br>Medical coverage<br><br><strong>Work Authorization<br><br></strong>Hotel will apply for the work authorization for a successful candidate.

<p>We are looking for a capable and trustworthy Senior Kitchen Technician to join our team in Doha, Qatar and ensure everything runs smoothly in the kitchen. You will be responsible for maintaining, troubleshooting, and repairing a wide range of commercial kitchen appliances to keep our operations running smoothly. Key Responsibilities: - Conduct routine maintenance on all refrigeration equipment, including walk-in freezers and coolers. - Identify and resolve problems with temperature control, compressors, leaks, and other refrigeration system failures. - Repair and replace malfunctioning parts for refrigeration systems. - Keep cold rooms clean and hygienic while adhering to safety and health requirements. - Ensure cold rooms operate efficiently to reduce energy use. - Install, maintain, and repair ovens, fryers, grills, ranges, and other cooking appliances. - Diagnose and troubleshoot problems with culinary appliances, both gas and electric. - Calibrate thermostats and ensure temperature controls are operating correctly. - Continuously assess and improve operational processes to enhance efficiency and productivity. - Repair leaks and maintain copper piping systems connected to kitchen appliances. - Install new copper piping for equipment when required. - Ensure plumbing rules and regulations are followed. - Undertake preventative maintenance on all kitchen appliances to avoid malfunctions. - Troubleshoot and fix minor electrical problems with kitchen equipment (excluding major electrical systems). - Replace broken parts to ensure equipment operates safely and effectively. - Maintain a tidy and well-organized workspace. - Reduce kitchen downtime and respond quickly to equipment emergencies.</p><p>- Diploma or Bachelor's degree in engineering or a relevant technical field. - Minimum 7 years of experience as a kitchen technician or in a similar role. - Strong knowledge of the upkeep, repair, and operation of refrigeration systems. - Familiarity with refrigerated rooms and hygiene standards. - Understanding of the features and functions of various kitchen appliances. - Ability to identify and resolve mechanical and electrical issues. - Knowledge of copper plumbing systems for kitchen use is preferred. - Strong critical thinking and problem-solving abilities. - Strong interpersonal and communication skills.</p>

<p>We are looking for a capable and trustworthy Senior Kitchen Technician to join our team in Doha, Qatar and ensure everything runs smoothly in the kitchen. You will be responsible for maintaining, troubleshooting, and repairing a wide range of commercial kitchen appliances to keep our operations running smoothly. Key Responsibilities: - Conduct routine maintenance on all refrigeration equipment, including walk-in freezers and coolers. - Identify and resolve problems with temperature control, compressors, leaks, and other refrigeration system failures. - Repair and replace malfunctioning parts for refrigeration systems. - Keep cold rooms clean and hygienic while adhering to safety and health requirements. - Ensure cold rooms operate efficiently to reduce energy use. - Install, maintain, and repair ovens, fryers, grills, ranges, and other cooking appliances. - Diagnose and troubleshoot problems with culinary appliances, both gas and electric. - Calibrate thermostats and ensure temperature controls are operating correctly. - Continuously assess and improve operational processes to enhance efficiency and productivity. - Repair leaks and maintain copper piping systems connected to kitchen appliances. - Install new copper piping for equipment when required. - Ensure plumbing rules and regulations are followed. - Undertake preventative maintenance on all kitchen appliances to avoid malfunctions. - Troubleshoot and fix minor electrical problems with kitchen equipment (excluding major electrical systems). - Replace broken parts to ensure equipment operates safely and effectively. - Maintain a tidy and well-organized workspace. - Reduce kitchen downtime and respond quickly to equipment emergencies.</p><p>- Diploma or Bachelor's degree in engineering or a relevant technical field. - Minimum 7 years of experience as a kitchen technician or in a similar role. - Strong knowledge of the upkeep, repair, and operation of refrigeration systems. - Familiarity with refrigerated rooms and hygiene standards. - Understanding of the features and functions of various kitchen appliances. - Ability to identify and resolve mechanical and electrical issues. - Knowledge of copper plumbing systems for kitchen use is preferred. - Strong critical thinking and problem-solving abilities. - Strong interpersonal and communication skills.</p>

Job Location:<br><br>Banana Island Resort Doha By Anantara<br><br>Overview<br><br>Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.<br><br>To lead and support the engineering team in maintaining hotel facilities, equipment, and systems in a safe, efficient, and guest-focused manner, ensuring all maintenance activities meet operational, safety, and brand standards.<br><br>Key Responsibilities<br><br>Lead and supervise daily engineering operations, assigning tasks and monitoring performance. Ensure preventive and corrective maintenance is carried out for all hotel equipment, rooms, and public areas. Respond promptly to maintenance requests and breakdowns to minimize guest impact. Support the Chief Engineer in planning schedules, manpower allocation, and maintenance priorities. Ensure compliance with health, safety, and fire life safety regulations at all times. Monitor energy consumption and support initiatives to improve efficiency and reduce costs. Maintain accurate maintenance records, logs, and reports. Coordinate with other departments to support smooth hotel operations. Assist with training, coaching, and performance development of engineering team members. Supervise external contractors and ensure quality and safety standards are met.<br><br>Qualifications<br><br>Qualifications & Experience<br><br>Diploma or technical certification in Engineering, Electrical, Mechanical, or related field. Minimum 3–5 years of experience in hotel engineering or facility maintenance. Prior supervisory or team-leading experience preferred. Strong technical knowledge of HVAC, electrical, plumbing, and general maintenance systems. Good understanding of safety standards, preventive maintenance, and compliance requirements.<br><br>Not the right fit? Set up email alerts as new job postings become available that meet your interest!