Jobs In Al Sufouh

Job Purpose<br><br>To perform quality assurance and quality control activities for railway maintenance and automation panel assembly by ensuring compliance with approved procedures, project specifications, client requirements, and applicable international standards. The role is responsible for inspection, surveillance, verification of workmanship, witnessing of testing activities, documentation review, and timely reporting of quality issues to support safe, reliable, and defect-free project execution.<br><br>Key Responsibilities<br><br>Rail Maintenance Quality<br><br>Perform quality inspections during preventive, corrective, monthly, quarterly, annual, and emergency maintenance activities Verify work orders, station, asset identification, equipment tags, and maintenance scope before inspection Ensure maintenance activities comply with approved procedures, work instructions, and client specifications Witness functional testing, equipment restoration, and handback activities Verify and record as-found/as-left conditions, inspection findings, measurements, photographs, and maintenance evidence Report defects, recurring issues, and quality concerns to the QHSE Manager<br><br>Automation Panel Assembly<br><br>Inspect the assembly of, Automation control panels Verify materials, components, wiring, cable terminations, ferruling, labeling, earthing, and workmanship against approved drawings and Bill of Materials Ensure compliance with project specifications, approved drawings, and relevant IEC standards Witness routine electrical testing and support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Verify closure of punch items prior to final inspection and release<br><br>Inspection & Documentation<br><br>Review Inspection Test Plans (ITPs), Quality Plans, method statements, drawings, and technical specifications before inspection Verify calibration validity of inspection and testing equipment Prepare inspection reports, checklists, punch lists, and quality records accurately and on time Raise observations and Non-Conformance Reports (NCRs) where required and verify implementation of corrective actions Maintain complete, accurate, and traceable quality documentation<br><br>Quality Compliance<br><br>Ensure compliance with the Project Quality Plan, ISO 9001:2015, client specifications, and project quality procedures Participate in internal audits, surveillance inspections, and continual improvement initiatives Coordinate with Engineering, Production, Maintenance, Commissioning, and Client representatives to resolve quality issues Promote a culture of quality, safety, accountability, and continuous improvement<br><br>Technical Competencies<br><br>Railway Maintenance Quality Inspection PLC, VFD, Automation Systems Electrical Drawings & Wiring Schematics Factory Acceptance Testing (FAT) & Site Acceptance Testing (SAT) Inspection Test Plans (ITPs) & Quality Documentation ISO 9001:2015 and relevant IEC Standards<br><br>Core Competencies<br><br>Inspection and Quality Assurance Technical Reporting & Documentation Analytical and Problem-Solving Skills Attention to Detail Communication & Teamwork Time Management Professional Integrity and Accountability<br><br>Qualifications<br><br>Diploma or Bachelor's Degree in Electrical, Electronics, Instrumentation, Automation, or a related engineering discipline Minimum 3 years of QA/QC experience in Railway/Metro Maintenance, Electrical Projects, Switchgear Manufacturing, or Automation Panel Assembly

Job Purpose<br><br>To perform quality assurance and quality control activities for railway maintenance and automation panel assembly by ensuring compliance with approved procedures, project specifications, client requirements, and applicable international standards. The role is responsible for inspection, surveillance, verification of workmanship, witnessing of testing activities, documentation review, and timely reporting of quality issues to support safe, reliable, and defect-free project execution.<br><br>Key Responsibilities<br><br>Rail Maintenance Quality<br><br>Perform quality inspections during preventive, corrective, monthly, quarterly, annual, and emergency maintenance activities Verify work orders, station, asset identification, equipment tags, and maintenance scope before inspection Ensure maintenance activities comply with approved procedures, work instructions, and client specifications Witness functional testing, equipment restoration, and handback activities Verify and record as-found/as-left conditions, inspection findings, measurements, photographs, and maintenance evidence Report defects, recurring issues, and quality concerns to the QHSE Manager<br><br>Automation Panel Assembly<br><br>Inspect the assembly of, Automation control panels Verify materials, components, wiring, cable terminations, ferruling, labeling, earthing, and workmanship against approved drawings and Bill of Materials Ensure compliance with project specifications, approved drawings, and relevant IEC standards Witness routine electrical testing and support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Verify closure of punch items prior to final inspection and release<br><br>Inspection & Documentation<br><br>Review Inspection Test Plans (ITPs), Quality Plans, method statements, drawings, and technical specifications before inspection Verify calibration validity of inspection and testing equipment Prepare inspection reports, checklists, punch lists, and quality records accurately and on time Raise observations and Non-Conformance Reports (NCRs) where required and verify implementation of corrective actions Maintain complete, accurate, and traceable quality documentation<br><br>Quality Compliance<br><br>Ensure compliance with the Project Quality Plan, ISO 9001:2015, client specifications, and project quality procedures Participate in internal audits, surveillance inspections, and continual improvement initiatives Coordinate with Engineering, Production, Maintenance, Commissioning, and Client representatives to resolve quality issues Promote a culture of quality, safety, accountability, and continuous improvement<br><br>Technical Competencies<br><br>Railway Maintenance Quality Inspection PLC, VFD, Automation Systems Electrical Drawings & Wiring Schematics Factory Acceptance Testing (FAT) & Site Acceptance Testing (SAT) Inspection Test Plans (ITPs) & Quality Documentation ISO 9001:2015 and relevant IEC Standards<br><br>Core Competencies<br><br>Inspection and Quality Assurance Technical Reporting & Documentation Analytical and Problem-Solving Skills Attention to Detail Communication & Teamwork Time Management Professional Integrity and Accountability<br><br>Qualifications<br><br>Diploma or Bachelor's Degree in Electrical, Electronics, Instrumentation, Automation, or a related engineering discipline Minimum 3 years of QA/QC experience in Railway/Metro Maintenance, Electrical Projects, Switchgear Manufacturing, or Automation Panel Assembly

The Mechanical Fitter is responsible for maintaining, troubleshooting, and repairing and overhauling machinery to company standards.<br>Responsibilities<br>Apply skills and knowledge and ability to ensure target production throughput rate or objectives are safely executed in line with Section Plan, KPIs, Qatar Shipyard Technology Solutions Values and IMS system. Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures and any legislative requirements. Adhere to health, safety, security and environmental policies, procedures, instructions and controls for the safety of self and others. Demonstrates proficiencies in pneumatics, hydraulics, engines, controls, machine component clearances / fits and an overall understanding machine operation and function. Ensure compliance to quality management procedures and controls to deliver high quality services and products. Troubleshoot and repair electrical and mechanical problems related to the production equipment. Assist Supervisor and Engineer in preparation of Root Cause Analysis Reports. Identify machine defective components and parts and communicate this to Supervisor and Engineer. Assist Supervisor and Engineer in commissioning of new machinery or re-commissioning of repaired machinery. Read technical drawings, work orders and production schedules to determine product or job instructions and specifications. Ensure that jobs are carried out as per schedule and steps stipulated in the maintenance job cards. Use and place materials in an economical manner. Performs work safely and utilizes safety equipment properly. Understands and follow all yard safety rules and regulations. Maintains quantum and quality of work set. Maintains tools and equipment. Maintains and upkeep housekeeping. Follows instructions from his superior and carry out his tasks in a safe and productive manner. Follows all safety procedures and report lapses, if any. Perform any other assigned duties and responsibilities. Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.<br>Qualifications<br>Technical Certificate in Machine Maintenance, Mechanical Maintenance or Electrical Maintenance. Or Machine Repair Apprenticeship<br>Required Skills<br>Skills and knowledge related to machinery maintenance and repair.<br>Preferred Skills<br>Mechanical Maintenance, Preventive Maintenance, Corrective Maintenance, Machinery Troubleshooting, Mechanical Repair, Hydraulic Systems, Pneumatic Systems, Industrial Equipment Maintenance, Rotating Equipment Maintenance, Fault Finding & Diagnostics, Machine Overhaul Commissioning & Recommissioning, Technical Drawing Interpretation, Equipment Inspection, Root Cause Analysis (RCA), Plant Maintenance, Workshop Maintenance, Shipyard Operations, Permit to Work (PTW), HSE Compliance

Primary Purpose Of The Job<br><br>Manage the review, approval, and issuance of e CPW/PTW for Asset operator’s users, tenants, and contractors, to ensure all the activities performed in the Industrial City boundary area are in line with Qatar Energy/ Industrial Cities Guidelines, Regulations and Procedures.<br><br>Develop and supervise inspection program, methodologies and schedules to ensure that all activities/projects related to Asset operator’s, tenants and contractors etc. in RLIC/MIC/DCA are in compliance with requirements and conditions as specified in applicable permits and procedures which are in compliance with Qatar Energy regulations.<br><br>Required Experience And Skills<br><br>10 years total experience with at least five years in oil and gas.<br><br> Working knowledge of discipline activities such as construction, testing, commissioning, and understanding of engineering principles. In depth working knowledge of engineering and HSE codes and standards. Ability to read engineering drawings.<br><br>Educational Qualifications<br><br>Bachelor of Science in Engineering in any discipline

Marjooram Trading, a prominent Fast-Moving Consumer Goods (FMCG) distribution company in Qatar, is urgently looking for a dynamic and results-driven Sales Team Leader.<br>About Us We specialize in delivering high-quality products across various sectors, ensuring exceptional market penetration and brand visibility. As we expand our footprint, we seek a strategic leader to head our sales division.<br>Role Overview As the Sales Team Leader, you will be responsible for driving business growth across key channels, including Retail, HoReCa, and School Canteens. Your key responsibilities will include:- Formulating sales strategies and setting targets.- Monitoring sales team and individual SKU performance.- Managing and expanding distribution across Retail, HoReCa, and School Canteens.<br>Requirements - Proven FMCG leadership experience in Qatar.- Strong existing relationships with Key Accounts and HoReCa.- Valid Qatari Driving License is mandatory.<br>How to Apply Interested candidates, please email your updated CV to marjooram@yahoo.com or contact +97472000914.

Primary Purpose Of The Job<br><br>Manage the review, approval, and issuance of e CPW/PTW for Asset operator’s users, tenants, and contractors, to ensure all the activities performed in the Industrial City boundary area are in line with Qatar Energy/ Industrial Cities Guidelines, Regulations and Procedures.<br><br>Develop and supervise inspection program, methodologies and schedules to ensure that all activities/projects related to Asset operator’s, tenants and contractors etc. in RLIC/MIC/DCA are in compliance with requirements and conditions as specified in applicable permits and procedures which are in compliance with Qatar Energy regulations.<br><br>Required Experience And Skills<br><br>10 years total experience with at least five years in oil and gas.<br><br> Working knowledge of discipline activities such as construction, testing, commissioning, and understanding of engineering principles. In depth working knowledge of engineering and HSE codes and standards. Ability to read engineering drawings.<br><br>Educational Qualifications<br><br>Bachelor of Science in Engineering in any discipline

Primary Purpose Of The Job<br><br>Manage the review, approval, and issuance of e CPW/PTW for Asset operator’s users, tenants, and contractors, to ensure all the activities performed in the Industrial City boundary area are in line with Qatar Energy/ Industrial Cities Guidelines, Regulations and Procedures.<br><br>Develop and supervise inspection program, methodologies and schedules to ensure that all activities/projects related to Asset operator’s, tenants and contractors etc. in RLIC/MIC/DCA are in compliance with requirements and conditions as specified in applicable permits and procedures which are in compliance with Qatar Energy regulations.<br><br>Required Experience And Skills<br><br>10 years total experience with at least five years in oil and gas.<br><br> Working knowledge of discipline activities such as construction, testing, commissioning, and understanding of engineering principles. In depth working knowledge of engineering and HSE codes and standards. Ability to read engineering drawings.<br><br>Educational Qualifications<br><br>Bachelor of Science in Engineering in any discipline

???? WE ARE HIRING – QA/QC ENGINEER ????<br>Are you a passionate and detail-oriented QA/QC Engineer with experience in the Sheet Metal Industry? Join our growing team and take your career to the next level!<br>Position:<br>QA/QC Engineer<br>Requirements:Bachelor's Degree in Mechanical Engineering or a related field. Proven experience in the Sheet Metal Industry is preferred. Strong knowledge of QA/QC procedures, inspection standards, and quality documentation. Ability to read and interpret engineering drawings and specifications. Excellent problem-solving, communication, and organizational skills. Dynamic, self-motivated, and capable of working in a fast-paced environment. Ready for immediate joining. We Offer:Attractive Salary Package Excellent career growth opportunities Professional and supportive work environment Immediate placement for the right candidate<br>If you have the skills, experience, and passion for delivering quality, we'd love to hear from you!<br>???? Apply Now: [+974 50734455]???? Email Your CV: [dhairyashil@alturaindustries.com]???? Location: Qatar

???? WE ARE HIRING – QA/QC ENGINEER ????<br>Are you a passionate and detail-oriented QA/QC Engineer with experience in the Sheet Metal Industry? Join our growing team and take your career to the next level!<br>Position:<br>QA/QC Engineer<br>Requirements:Bachelor's Degree in Mechanical Engineering or a related field. Proven experience in the Sheet Metal Industry is preferred. Strong knowledge of QA/QC procedures, inspection standards, and quality documentation. Ability to read and interpret engineering drawings and specifications. Excellent problem-solving, communication, and organizational skills. Dynamic, self-motivated, and capable of working in a fast-paced environment. Ready for immediate joining. We Offer:Attractive Salary Package Excellent career growth opportunities Professional and supportive work environment Immediate placement for the right candidate<br>If you have the skills, experience, and passion for delivering quality, we'd love to hear from you!<br>???? Apply Now: [+974 50734455]???? Email Your CV: [dhairyashil@alturaindustries.com]???? Location: Qatar

Responsibilities: • Conduct underwater hull inspections, propeller polishing, sea chest cleaning, anode replacement, and related maintenance tasks during vessel docking/undocking.• Install and secure underwater support blocks, wedges, and guide pins as per the Docking Plan.• Carry out underwater cutting, welding, and NDT tasks where required using approved underwater tools and techniques.• Perform salvage, lifting, and underwater recovery operations using rigging, cranes, and winches.• Operate and maintain underwater video and communication equipment to document and support technical evaluations.• Prepare technical dive reports and photographic documentation for marine engineers and surveyors.• Assist Dockmaster during vessel movement, block positioning, and underwater checks.• Provide fire watch and emergency response support when not assigned diving duties.<br>Requirements1. Education & Professional Qualification:• International commercial diving certifications (IMCA are Mandatory)• Training in firefighting and first aid.<br>2. Professional Experience: • Min. 3-4 years experiences in as a commercial diver in shipyard, offshore, or industrial diving operations.• Experience with docking/undocking procedures, floating docks, and drydock operations preferred.

Signage Fabrication & Installation Technician<br><br>Location: Doha, Qatar — On-site<br><br>Employment Type: Full-Time<br><br>Experience: 4–5 Years<br><br>Preferred: GCC Experience<br><br>Language: English — Reading, Writing & Basic Communication<br><br>Job Overview<br><br>We are looking for an experienced Signage Fabrication & Installation Technician to join our on-site team in Doha, Qatar. The ideal candidate will have 4–5 years of hands-on experience in signage production, fabrication, graphic finishing, and installation.<br><br>The role involves working on a variety of commercial and retail signage projects, including illuminated signs, 3D channel letters, lightboxes, vinyl graphics, ACP cladding, directional signage, and branding installations.<br><br>Key Responsibilities<br><br>Fabricate, assemble, finish, and install indoor and outdoor signage. Read and interpret technical drawings, production layouts, and installation plans. Measure, cut, assemble, and finish signage components using appropriate tools and equipment. Prepare substrates and surfaces for accurate vinyl application. Apply self-adhesive vinyl graphics to acrylic, glass, metal, composite panels, and vehicles. Mount, laminate, trim, and finish printed graphics according to project specifications. Install illuminated signs, 3D channel letters, lightboxes, directional signage, and commercial branding elements. Perform ACP cladding installation and associated finishing work where required. Carry out site installations while following applicable workplace safety procedures. Inspect completed installations for quality, accuracy, alignment, and finish. Coordinate with production and installation teams to meet project deadlines. Maintain tools, equipment, and a clean and organized work area. <br><br>Required Skills & Qualifications<br><br>4–5 years of relevant signage fabrication and installation experience. Experience working on commercial, retail, advertising, or corporate signage projects. Strong practical knowledge of vinyl application, graphic finishing, and signage assembly. Hands-on experience with illuminated signs, channel letters, lightboxes, and ACP cladding. Ability to interpret technical drawings and installation layouts. Familiarity with workshop tools, fabrication equipment, and installation methods. Strong attention to detail and practical problem-solving ability. Ability to work independently and collaboratively within a team. Basic English communication skills. GCC experience is preferred but not mandatory. <br><br>Preferred Candidate Profile<br><br>Strong understanding of signage fabrication, production, and installation processes. Comfortable working at customer sites and, where required, at heights. Physically fit and capable of performing hands-on installation work. Quality-focused with good attention to finishing details. Reliable, punctual, and committed to meeting project deadlines. Positive attitude with strong teamwork and time-management skills. <br><br>Benefits & Perks<br><br>Competitive salary based on experience and skills. Accommodation allowance or accommodation and food allowance, subject to company policy. Opportunity to work on diverse commercial and retail signage projects. Professional and supportive working environment. Long-term career development opportunities. Exposure to modern signage fabrication, finishing, and installation techniques. <br><br>Skills: communication,projects,english,application,sign production,graphics,cladding,vinyl

The Finance Specialist interfaces with PSO Finance department to provide accounting, time-keeping, payroll and banking support for the Site. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br>Principal Accountabilities<br><br>Prepares all telephone and utility bills for payment and reconciliation of charges to company and employee accounts. Maintain site Petty Cash fund in accordance with Program policies and procedures. Manages the timekeeping Deltek Costpoint (Time & Expense) for the Site. Provide Deltek Costpoint (Time & Expense) training for new hires. Prepares month end accruals reports. Prepares Operational Funds requests. Ensures that all transactions are assigned correct Charge Codes. Aduit Expense Reports for accuracy and obtain correct approvals for the payment and reimbursements. Prepares checks and wire transfers. Maintain Invoice Log and Invoice Log transfer. Prepares invoices and supporting documents for payment with the correct approvals. Maintains an auditable filing system for all documents. Provides Finance Reports as requested by the Site Manager and PSO Finance. Ensure accurate accounting in the payroll processes. Respond to vendors queries regarding outstanding payments. Coordinate with Supply and Purchasing departments regarding documents and payments clearance. Data input, reconciles and submits site Quicken Data Files along with supporting on weekly and monthly basis. Maintains, reconciles and submits Account Payable Vouchers for site Debit Purchase Cards. Performs utility and bank runs as and when required. Prepares and submits Distribution Correction Vouchers (DCV) for telecom services on a monthly basis. At the end of each pay period provides the updated WPS salary file to DIFZ Dubai and DI payroll for processing the salary. Confirm to PSO payroll office all local payment has been processed. Responsible for the security of cash and the company documents in safe, office equipment (OEL), Finance documents such as disbursement voucher of FIN department and the Finance Office, if an office that can be secured is allocated. Performs other duties as assigned. Works in normal office environment. <br><br>Minimum Requirements<br><br>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level. Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. Must possess a valid home country driver's license and ability to obtain host nation driver's license. High School diploma or equivalent required. Three years' experience in a professional accounting environment with experience in handling cash required. Light to moderate lifting as required carried out in an office environment. Ability to work overtime as needed and sometimes outside of standard hours. Ability to travel domestically and internationally. <br><br>Preferred Qualifications<br><br>Associates Degree in Finance or related discipline preferred.

Signage Fabrication & Installation Technician<br><br>Location: Doha, Qatar — On-site<br><br>Employment Type: Full-Time<br><br>Experience: 4–5 Years<br><br>Preferred: GCC Experience<br><br>Language: English — Reading, Writing & Basic Communication<br><br>Job Overview<br><br>We are looking for an experienced Signage Fabrication & Installation Technician to join our on-site team in Doha, Qatar. The ideal candidate will have 4–5 years of hands-on experience in signage production, fabrication, graphic finishing, and installation.<br><br>The role involves working on a variety of commercial and retail signage projects, including illuminated signs, 3D channel letters, lightboxes, vinyl graphics, ACP cladding, directional signage, and branding installations.<br><br>Key Responsibilities<br><br>Fabricate, assemble, finish, and install indoor and outdoor signage. Read and interpret technical drawings, production layouts, and installation plans. Measure, cut, assemble, and finish signage components using appropriate tools and equipment. Prepare substrates and surfaces for accurate vinyl application. Apply self-adhesive vinyl graphics to acrylic, glass, metal, composite panels, and vehicles. Mount, laminate, trim, and finish printed graphics according to project specifications. Install illuminated signs, 3D channel letters, lightboxes, directional signage, and commercial branding elements. Perform ACP cladding installation and associated finishing work where required. Carry out site installations while following applicable workplace safety procedures. Inspect completed installations for quality, accuracy, alignment, and finish. Coordinate with production and installation teams to meet project deadlines. Maintain tools, equipment, and a clean and organized work area. <br><br>Required Skills & Qualifications<br><br>4–5 years of relevant signage fabrication and installation experience. Experience working on commercial, retail, advertising, or corporate signage projects. Strong practical knowledge of vinyl application, graphic finishing, and signage assembly. Hands-on experience with illuminated signs, channel letters, lightboxes, and ACP cladding. Ability to interpret technical drawings and installation layouts. Familiarity with workshop tools, fabrication equipment, and installation methods. Strong attention to detail and practical problem-solving ability. Ability to work independently and collaboratively within a team. Basic English communication skills. GCC experience is preferred but not mandatory. <br><br>Preferred Candidate Profile<br><br>Strong understanding of signage fabrication, production, and installation processes. Comfortable working at customer sites and, where required, at heights. Physically fit and capable of performing hands-on installation work. Quality-focused with good attention to finishing details. Reliable, punctual, and committed to meeting project deadlines. Positive attitude with strong teamwork and time-management skills. <br><br>Benefits & Perks<br><br>Competitive salary based on experience and skills. Accommodation allowance or accommodation and food allowance, subject to company policy. Opportunity to work on diverse commercial and retail signage projects. Professional and supportive working environment. Long-term career development opportunities. Exposure to modern signage fabrication, finishing, and installation techniques. <br><br>Skills: graphics,sign production,application,vinyl,cladding,english,projects,communication

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Technical:<br>Collaborate with the team member integration. Analyze and implement contractual documentation and normative To develop following activities for Equipment and Electrical material under its responsibility:Sizing Study Technical Specifications Requisitions MTOTechnical Bid Evaluation Follow-up to the purchase orders to comply with the milestones related to information and equipment delivery. Coordinate information and requirements with disciplines directly related to Electrical Department (Purchasing, Inspection, Projects). To supervise and participate in the team work performance as guideline by Electrical team Leader. To assure properly use of the management tools:Smart Plant Materials (Marian). Document Management System (Documentum). VDDR & IAP<br>Additional to above activities, to support during proposal development:<br>Collaborate with Cost estimation for proposals. Development of MTO for Equipment and material Installations To prepare deviations and clarifications lists Design Management:Collaborate with Team leader with team members integration To identify difficulties during the work performance and report to Team leader in order to be solved. To share information for proper project performance.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

Company: Qatar Fabrication Company Location: Ras Laffan / Qatar<br>Reports To: Functionally Reports To: Operation Engineering Manager Operationally Reports To: Fabrication Operations Engineer<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Tasks and Responsibilities – Discipline Specific Developing Project Fabrication Procedures. Initiates material procurement for fabrication aids. Initiate RFQ for work to be subcontracted. Review drawings for constructability. Initiate assembly checklist for all major construction milestones. Leads WCR review and confirmation of WT before lifts, loadout, weighing. Manages all coordination for loadout preparation and weighing. Carries out coordination with Marine and Fab Team for installation aids, sea fastening and offshore lift rigging. Carries out coordination with CSE Department and Marine Warranty Surveyor. Publishes CSE deliverable list with required dates. Chairs CSE coordination meeting. Provide yard layout input with regards to layout, stack, and loadout dates.<br>Tasks and Responsibilities – General Understands the full contractual scope of work, contract type and milestone schedules. Participates in development of project fabrication execution plan to meet contract requirements most productively. Develops a work pack index and sets priorities and ROS dates for deliverables. Prepare project specific task listing. At commencement of the project participate in fabrication kick-off meeting. Forecast fabrication requirements (deliverable inputs) to meet the project contract schedule. Coordinates with MTO, warehouse, drafting teams to issue work packs. Review and understand manhour estimate. Ensure estimates are correct. Provide feedback to the estimation department where required. Issues work packs and follows up all activities for work pack execution. Carries out progress reporting on the project. Reviews weekly fabrication progress reports for progress and productivity. Acts on anomalies. Responsible for documenting all scopes of work changes (change orders) and coordinating AFC estimate updates. Reviews input deliverable forecast dates (material & drawings) and advises impact to fabrication schedule. Appraises Senior Production Engineer or Fabrication Operations Engineer of any project issues which affect the forecasted progress, productivity, and schedule commitments. Prepare technical queries/correspondence to be issued to the client. Provides field guidance to meet project specifications, schedule, and targets. Participates and provides feedback on regular sites and look ahead meetings. Coordinates with subcontractors for completion of work. Raises variance orders to capture extra works not part of AFC estimates. Identify items requiring support from the construction engineering team. Coordinates and follows up to get required input. Prepares project fabrication lessons learnt.<br>Other Expectations:Participates in QHSES initiatives and drives achieving objectives. Follow the company policies<br>Qualifications, Experience and Skills<br>Qualifications:Bachelor of Engineering in Mechanical, Structural Engineering or equivalent<br>Experience: 4+ years in Offshore and Petrochemical Industry or equivalent. Preferably worked as an Engineer in executing Construction projects.

Job Summary<br><br>The Inspector - QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements. This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization's commitment to delivering high-quality products and services<br><br>Roles & Responsibilities<br><br>Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements. Verify material test certificates (MTCs) and maintain traceability Support pressure tests, NDT activities, and dimensional inspections. Ensure all measuring and testing equipment are properly calibrated and used as per defined standards Prepare inspection reports, checklists, and non-conformance reports (NCRs). Maintain accurate and detailed QA/QC records for traceability and audit purposes Identify and report deviations or non-conformances to the QA/QC Engineer. Assist in root cause analysis and follow-up of corrective and preventive actions Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company's HSE standards<br><br>QHSE Responsibilities<br><br>Comply with all QHSE standards, policies, and procedures relevant to your work Actively participate in QHSE meetings and complete all required safety inductions and trainings Identify and report unsafe conditions; take corrective action where possible within your scope Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly Support a safe work environment by cooperating with safety practices and encouraging others to do the same Refer to the OHSMS Manual, Section 4.4.1, for further clarification on individual QHSE responsibilities and accountability<br><br>Education & Certificates<br><br>Diploma or Bachelor's Degree in Mechanical or Electrical Engineering NDT Level II (UT/RT/PT/MT) preferred<br><br>Experience<br><br>Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNGFamiliar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079. etc.) Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects

Job Summary<br><br>The Inspector - QA/QC is responsible for carrying out inspection and quality verification activities during material receipt, fabrication, assembly, and testing to ensure compliance with project specifications, company standards, and customer requirements. This role plays a vital part in maintaining quality consistency, ensuring traceability, and supporting the organization's commitment to delivering high-quality products and services<br><br>Roles & Responsibilities<br><br>Conduct in-process and final inspections of fabrication, welding, assembly, and mechanical works in accordance with approved drawings, procedures, and specifications Inspect incoming materials, components, and consumables to ensure they meet quality and specification requirements. Verify material test certificates (MTCs) and maintain traceability Support pressure tests, NDT activities, and dimensional inspections. Ensure all measuring and testing equipment are properly calibrated and used as per defined standards Prepare inspection reports, checklists, and non-conformance reports (NCRs). Maintain accurate and detailed QA/QC records for traceability and audit purposes Identify and report deviations or non-conformances to the QA/QC Engineer. Assist in root cause analysis and follow-up of corrective and preventive actions Ensure all inspection and testing activities adhere to company QA/QC procedures, project quality plans, and international codes and standards Work closely with production, engineering, and project teams to ensure that quality requirements are clearly communicated and properly implemented Participate in vendor or subcontractor inspections when required to verify compliance with quality and technical specifications Assist during client and third-party inspections by providing documentation and ensuring compliance with project quality requirements Follow all safety guidelines during inspection activities and ensure that inspection processes comply with the company's HSE standards<br><br>QHSE Responsibilities<br><br>Comply with all QHSE standards, policies, and procedures relevant to your work Actively participate in QHSE meetings and complete all required safety inductions and trainings Identify and report unsafe conditions; take corrective action where possible within your scope Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly Support a safe work environment by cooperating with safety practices and encouraging others to do the same Refer to the OHSMS Manual, Section 4.4.1, for further clarification on individual QHSE responsibilities and accountability<br><br>Education & Certificates<br><br>Diploma or Bachelor's Degree in Mechanical or Electrical Engineering NDT Level II (UT/RT/PT/MT) preferred<br><br>Experience<br><br>Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNGFamiliar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/ IECEX-60079. etc.) Experience in inspection activities during procurement, fabrication, installation and hookup, and commissioning of oil and gas production facilities projects

As Logistics Manager, you will play a central role in keeping site operations running efficiently across complex construction environments. This role is focused on coordinating the movement of people, materials, equipment, and site activities so that logistics operations support construction progress, minimize disruption, and align with project priorities and sequencing.<br><br>Responsibilities<br><br>Plan, coordinate, and manage all site logistics activities for large-scale building construction projects Oversee efficient material flow, including delivery scheduling, receiving, storage, handling, distribution, and just-in-time delivery strategies Manage site access control, transportation, storage, lifting operations, and traffic management in line with project timelines, safety standards, and quality requirements Develop and implement construction logistics plans, including site layouts, storage zones, laydown areas, temporary facilities, and logistics coordination aligned to project milestones and construction sequences Manage interfaces between procurement, construction teams, and subcontractors to support smooth site operations<br><br><br>Requirements<br><br>Requirements<br><br>Bachelor's degree in engineering, logistics, construction management, or a related discipline Minimum 10 years of relevant experience in large-scale building construction projects, including residential, accommodation, mixed-use, institutional, or similar developments, on projects of comparable scale and complexity Experience developing and implementing construction logistics plans, including site layouts, storage zones, laydown areas, temporary facilities, and logistics coordination aligned to project milestones and construction sequences Experience preparing and managing traffic management plans, including vehicle routes, delivery schedules, traffic flow, and coordination of heavy vehicle movements Experience planning and coordinating crane operations and lifting activities, including lifting plans, method statements, and lifting schedules Experience managing site access control procedures, including personnel, vehicle, and visitor access, gate operations, permit systems, and security requirements Strong understanding of material flow planning, including delivery scheduling, receiving, storage, handling, distribution, and just-in-time delivery strategies Experience managing interfaces between procurement, construction teams, and subcontractors Experience with construction planning and scheduling tools such as Primavera P6, Microsoft Project, Asta Powerproject, or Oracle Primavera Cloud Experience with ERP and procurement systems such as SAP ERP, Oracle ERP, Oracle JD Edwards, Microsoft Dynamics 365, or IFS Applications Experience with material tracking, warehouse management, and fleet tracking systems, including barcode or QR code material tracking, RFID-based tracking, WMS, digital delivery management, GPS monitoring, or inventory management systems Valid MMUP/UPDA registration where applicable, and preferred for candidates currently based in Qatar Excellent communication skills in English, both written and verbal10-20 years of experience in major construction projects is preferred Previous experience in Qatar is highly preferred; GCC experience may be considered as an alternative Familiarity with local authority requirements and major clients and consultants in Qatar is advantageous

The Finance Specialist interfaces with PSO Finance department to provide accounting, time-keeping, payroll and banking support for the Site. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).<br><br>Principal Accountabilities<br><br>Prepares all telephone and utility bills for payment and reconciliation of charges to company and employee accounts. Maintain site Petty Cash fund in accordance with Program policies and procedures. Manages the timekeeping Deltek Costpoint (Time & Expense) for the Site. Provide Deltek Costpoint (Time & Expense) training for new hires. Prepares month end accruals reports. Prepares Operational Funds requests. Ensures that all transactions are assigned correct Charge Codes. Aduit Expense Reports for accuracy and obtain correct approvals for the payment and reimbursements. Prepares checks and wire transfers. Maintain Invoice Log and Invoice Log transfer. Prepares invoices and supporting documents for payment with the correct approvals. Maintains an auditable filing system for all documents. Provides Finance Reports as requested by the Site Manager and PSO Finance. Ensure accurate accounting in the payroll processes. Respond to vendors queries regarding outstanding payments. Coordinate with Supply and Purchasing departments regarding documents and payments clearance. Data input, reconciles and submits site Quicken Data Files along with supporting on weekly and monthly basis. Maintains, reconciles and submits Account Payable Vouchers for site Debit Purchase Cards. Performs utility and bank runs as and when required. Prepares and submits Distribution Correction Vouchers (DCV) for telecom services on a monthly basis. At the end of each pay period provides the updated WPS salary file to DIFZ Dubai and DI payroll for processing the salary. Confirm to PSO payroll office all local payment has been processed. Responsible for the security of cash and the company documents in safe, office equipment (OEL), Finance documents such as disbursement voucher of FIN department and the Finance Office, if an office that can be secured is allocated. Performs other duties as assigned. Works in normal office environment. <br><br>Minimum Requirements<br><br>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level. Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. Must possess a valid home country driver's license and ability to obtain host nation driver's license. High School diploma or equivalent required. Three years' experience in a professional accounting environment with experience in handling cash required. Light to moderate lifting as required carried out in an office environment. Ability to work overtime as needed and sometimes outside of standard hours. Ability to travel domestically and internationally. <br><br>Preferred Qualifications<br><br>Associates Degree in Finance or related discipline preferred.