Air Conditioning Technician Jobs

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>

Job Requisition ID: 180649<br><br>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.<br><br>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day<br><br>Overview Of The Role<br><br>As a Technician, you will be responsible for carrying out servicing, preventive maintenance, diagnostics, troubleshooting, and repairs on Volvo trucks and buses in line with Volvo manufacturer standards, DOMASCO procedures, and workshop safety requirements. You will play an important part in ensuring vehicles are repaired correctly, safely, and within the agreed timelines, while supporting high customer satisfaction and workshop productivity.<br><br>What You Will Do<br><br> Perform servicing, preventive maintenance, inspections, diagnostics, and repairs of Volvo trucks and buses according to manufacturer and dealer/distributor standards. Diagnose and rectify mechanical, electrical, electronic, hydraulic, and pneumatic faults using approved diagnostic procedures and equipment. Complete assigned jobs within the specified repair time and agreed service schedule while maintaining high-quality workmanship. Strictly follow Volvo technical specifications, repair procedures, Workshop Service Manuals, technical instructions, and guidance from the Workshop Supervisor/Work In-Charge. Read and interpret electrical, hydraulic, pneumatic, and mechanical schematics accurately. Effectively use Volvo-approved diagnostic tools, technical systems, service manuals, and other workshop equipment. Conduct systematic troubleshooting and root-cause analysis to identify and rectify vehicle faults efficiently. Carry out required testing, calibration, programming, and adjustments using approved Volvo diagnostic equipment. Perform quality checks after completing repairs to ensure the vehicle is safe, reliable, and ready for delivery. Identify additional faults or repair requirements during inspection and communicate them to the Workshop Supervisor/Service Advisor. Maintain accurate job card records, including fault findings, diagnostic results, repairs performed, and parts replaced. Follow warranty procedures and ensure all warranty repair documentation is completed accurately. Maintain tools, equipment, and work areas in good condition and ensure proper housekeeping within the workshop. Follow all company HSE policies, workshop safety procedures, and safe working practices. Minimize repeat repairs and comebacks by applying correct diagnostic and repair procedures. Complete assigned Volvo technical training and e-learning within the required timelines. Support other technicians and workshop team members when required and contribute to continuous technical improvement. Maintain professional conduct and effective communication with supervisors, colleagues, and other departments. Contribute to achieving workshop targets related to productivity, efficiency, quality, turnaround time, and customer satisfaction.<br><br>Required Skills To Be Successful<br><br> Technical diploma or certificate in Automotive, Mechanical, Electrical, or a related field. Strong technical knowledge of heavy commercial vehicles, preferably Volvo trucks and buses. Proficiency in reading and interpreting electrical, hydraulic, pneumatic, and mechanical schematics. Proficiency in using Volvo Workshop Service Manuals and Volvo-approved diagnostic tools.<br><br>About The Team<br><br>You will be part of the DOMASCO Aftersales Service team supporting Volvo Trucks & Buses. The team works closely with Workshop Supervisors, Service Advisors, and other technical colleagues to deliver reliable service, efficient turnaround times, and a strong customer experience. This is a hands-on workshop environment where teamwork, safety, technical accuracy, and continuous improvement are highly valued.<br><br>What Equips You For The Role<br><br> Relevant experience in heavy commercial vehicle servicing and repair. Previous experience working on Volvo trucks and/or buses is preferred. Experience using electronic diagnostic tools and technical service information systems is an advantage. A strong commitment to safety, quality, first-time-right repairs, and continuous technical learning. Strong troubleshooting, diagnostic, and problem-solving skills. Good attention to detail and accuracy in repair execution. Effective time management and ability to complete assigned jobs within required timelines. Ability to work independently as well as effectively within a team. Commitment to first-time-right repairs and high-quality workmanship. Willingness to develop technical knowledge through continuous training and learning.<br><br>About Al-Futtaim Automotive<br><br>A major division of the UAE-based Al-Futtaim Group of companies, Al-Futtaim Automotive is an industry leader with presence in 10 countries across the Middle East, Asia and Africa.<br><br>Our core business activities at Al-Futtaim Automotive include distribution, manufacturing, leasing and aftersales, and we are firmly established as the regional representative of some of the world’s most iconic automotive brands: Toyota, Lexus, Honda, Jeep, Chrysler, Dodge, Volvo and RAM.<br><br>We are driven by a customer-centric approach, constantly pushing the boundaries on innovation, quality standards, and value-added service across our vast universe of customers - right from motoring enthusiasts to fleet operators to contractors. Our mission is to become the leader in custom-made mobility solutions by delivering nothing less than world-class omni-channel experiences.<br><br>We channel our local expertise and global trust to deliver one of the most comprehensive portfolios of mobility products and solutions, from passenger cars to SUVs, electric vehicles to high-performance motorbikes, commercial vehicles to industrial & construction equipment.<br><br>What keeps the company moving forward is a 9000-member strong team, with inspiring possibilities for growth, throughout the career path. This is Al-Futtaim Automotive and we empower talent to move forward.

Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Support Expansion Project Instrument activities for pre-commissioning, commissioning, preservation and start-up tasks and conduct Instrument field maintenance activities safely, including preventive, predictive and breakdown maintenance, to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities). Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Conduct preventive and corrective maintenance work on field instruments as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of instrumentation field issues, as directed and guided by Foreman/Supervisor and issue timely reports. Reviews the Piping & Instrument Diagram and Drawings (P&IDs), loop drawings, hook-up drawings, instrument index, instrument datasheets, logic diagrams and other documents required to tackle issues related to field instrumentation. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in regular Toolbox meeting with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe or observation cards. Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas industry or petrochemical industry Technical and Business Skills Computer literate with basic knowledge in MS Office software. Good written and oral communication skills in English. Extensive experience in the operation, maintenance, and calibration/testing of process control systems including Field, Panel, DCS, PLC’s instruments, vibration measurement, Fire and Gas and ESD systems. Valve (Control/ON-OFF/Emergency-Shutdown) stroking or calibration and troubleshooting skills. Ability to read and understand technical drawings (P&ID’s) and documents. Good adaptability to multinational environment with wide exposure to various cultures and customs. Experience working in H2S environment.

Job description:<br><br> We will be running a recruitment campaign in India during the latter part of 2026. Only candidates who are shortlisted for this position will receive an invitation to attend an in-person interview. Walk-in interviews will not be accepted. Job Purpose Supports Expansion Project Electrical support activities for pre-commissioning, commissioning, preservation and start-up tasks and conducts electrical field maintenance activities safely, including preventive, predictive and breakdown maintenance, to ensure reliability and availability of Company Assets (North, South, RLTO & Refining, Barzan and NFE facilities) Key Job Accountabilities Participates in pre-commissioning, commissioning, preservation and start-up of new equipment and facilities. Conduct preventive and corrective maintenance work on field Electrical Equipment as directed in the field and workshop in line with safe work practices. Ensure that material and spare parts are available and in good condition before starting maintenance activities as per work plan. Ensure applicable maintenance procedures are followed and ensure proper controls are in place to ensure safe workplace. Provides accurate records and close-out reports of all completed work as per company requirements, as requested and guided by Foreman/Supervisor. Participates in troubleshooting of Electrical field issues, as directed and guided by Foreman/Supervisor and issue timely reports. Reviews the Piping and Instrument Diagram and Drawing (P&IDs), loop drawings, hook-up drawings, Electrical Index, Electrical datasheets, logic diagrams and other documents required to tackle issues related to Electrical field equipment. Perform calibrated and certified tools specific for the job type and ensure requirements for Intrinsic Safety (IS). Participates in regular Toolbox meetings with colleagues and reports all Near Misses, Incidents and Accidents during operation by raising B-Safe and observation cards. Undertakes troubleshooting of equipment failure or operational problems. Seek guidance for problems of a more complex nature from Maintenance Superintendent, Vendor and OEM support. Qualifications Completion of Secondary School education followed by vocational training program (TAFE). Knowledge and/or Experience 3 years’ experience as a technician in the Oil & Gas industry or petrochemical industry Technical and Business Skills Good written and oral communication skills in English. Knowledge of computerized maintenance management systems. Knowledge of preventative and predictive maintenance and condition monitoring techniques. Basic computer skills. Ability to read and understand technical drawings (including Electrical Drawings) and documents. Good adaptability to multinational environment with side exposure to various cultures and customs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Black &amp; Grey HR is partnering with a leading enterprise technology organization to hire an experienced <b>Field Support Technician</b>. This opportunity is ideal for professionals with a strong background in end-user computing, hardware/software troubleshooting, and executive-level IT support. A valid driver's license is mandatory for this role.<br><br><b>Key Responsibilities:<br></b><br><u>IT Operational Support<br></u><br>- Provide first- and second-level support for desktops, laptops, mobile devices, and peripherals.<br><br>- Troubleshoot and resolve hardware, software, network, and application issues.<br><br>- Install, configure, and maintain operating systems (Windows/macOS) and approved enterprise software.<br><br>- Support video conferencing tools, printers, and office IT equipment.<br><br>- Manage and resolve incidents and service requests within defined SLA timelines.<br><br>- Document issues, resolutions, and processes in the ticketing system.<br><br>- Assist in IT onboarding/offboarding processes, including device setup, configuration, and retrieval.<br><br>- Coordinate with vendors for repairs, replacements, and warranty claims.<br><br>- Provide remote support for offsite or hybrid employees.<br><br>- Escalate unresolved issues to higher-level support teams when required.<br><br><u>Enterprise Collaboration &amp; Identity Support<br></u><br>- Support end-user access to Microsoft 365, including Outlook, Teams, and SharePoint.<br><br>- Assist with user provisioning and de-provisioning related to identity management (e.g., Active Directory, Azure Entra ID) from the endpoint perspective.<br><br>- Enforce security and compliance policies on end-user devices.<br><br><u>Asset Management</u><br>- Participate in IT asset management and periodic inventory checks.<br><br>- Communicate asset management strategies to team members and stakeholders effectively.<br><br>- Track hardware lifecycle and ensure accurate inventory records.<br><br><u>Security &amp; Operations</u><br>- Ensure compliance with IT policies, security standards, and best practices.<br><br>- Support security tools such as antivirus, endpoint protection, and MFA on end-user devices.<br><br>- Maintain technical documentation and standard operating procedures (SOPs).<br><br>- Participate in incident, change, and service management activities.<br><br></span><br><span>Requirements<u>Experience</u><br>- Minimum 5 years of work experience in the IT industry.<br><br>- 3 years of experience in positions and responsibilities within IT Service Management or End User Computing / Equipment Domain.<br><br>- Proven experience handling VIP/end-user executive support.<br><br>- Strong knowledge of Windows OS environments.<br><br>- Familiarity with Microsoft 365, Outlook, Teams, and basic network troubleshooting.<br><br>- Experience with ticketing tools and Managed Print Services.<br><br>- Understanding of security tools such as antivirus, endpoint protection, and MFA.<br><br><u>Education &amp; Certifications</u><br>- Bachelor’s degree in Information Technology (BSc), Computer Science, or a related field (BSc of Engineering or BSc of IT).<br><br>- Microsoft Certified: Modern Desktop Administrator (preferred).<br><br>- Certification in ITIL or other similar areas of IT Service Management (preferred).<br><br></span><br><span>Benefits<span><span>-&nbsp;</span></span><span><span><span>Competitive Salary + Benefits</span></span></span><br></span><br> </div>

Black & Grey HR is partnering with a leading enterprise technology organization to hire an experienced Field Support Technician. This opportunity is ideal for professionals with a strong background in end-user computing, hardware/software troubleshooting, and executive-level IT support. A valid driver's license is mandatory for this role.<br>Key Responsibilities:IT Operational Support Provide first- and second-level support for desktops, laptops, mobile devices, and peripherals. Troubleshoot and resolve hardware, software, network, and application issues. Install, configure, and maintain operating systems (Windows/mac OS) and approved enterprise software. Support video conferencing tools, printers, and office IT equipment. Manage and resolve incidents and service requests within defined SLA timelines. Document issues, resolutions, and processes in the ticketing system. Assist in IT onboarding/offboarding processes, including device setup, configuration, and retrieval. Coordinate with vendors for repairs, replacements, and warranty claims. Provide remote support for offsite or hybrid employees. Escalate unresolved issues to higher-level support teams when required.<br>Enterprise Collaboration & Identity Support Support end-user access to Microsoft 365, including Outlook, Teams, and Share Point. Assist with user provisioning and de-provisioning related to identity management (e.g., Active Directory, Azure Entra ID) from the endpoint perspective. Enforce security and compliance policies on end-user devices.<br>Asset Management Participate in IT asset management and periodic inventory checks. Communicate asset management strategies to team members and stakeholders effectively. Track hardware lifecycle and ensure accurate inventory records.<br>Security & Operations Ensure compliance with IT policies, security standards, and best practices. Support security tools such as antivirus, endpoint protection, and MFA on end-user devices. Maintain technical documentation and standard operating procedures (SOPs). Participate in incident, change, and service management activities.<br>Requirements:Experience Minimum 5 years of work experience in the IT industry.3 years of experience in positions and responsibilities within IT Service Management or End User Computing / Equipment Domain. Proven experience handling VIP/end-user executive support. Strong knowledge of Windows OS environments. Familiarity with Microsoft 365, Outlook, Teams, and basic network troubleshooting. Experience with ticketing tools and Managed Print Services. Understanding of security tools such as antivirus, endpoint protection, and MFA.<br>Education & Certifications Bachelor’s degree in Information Technology (BSc), Computer Science, or a related field (BSc of Engineering or BSc of IT). Microsoft Certified: Modern Desktop Administrator (preferred). Certification in ITIL or other similar areas of IT Service Management (preferred).

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Kitchen and Laundry Technician, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br> Carryout all maintenance work as per PPM jobs cards. Maintains level of main gas tanks and routine inspections. Able to install new equipment when necessary. Maintains all Kitchen, Refrigeration and Laundry equipment to ensure maximum efficiency. Maintains walk-in freezer temperature records as per Municipality requirement Keeps Kitchen mechanical rooms clean and in good order. To carry out any other reasonable duties and responsibilities as assigned and should be multi-tasking. To respond to changes in the (enter function) function as dictated by the industry, company or the Hotel. <br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Kitchen and Laundry Technician, you’re not just maintaining the hotel’s physical safety and functionality – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br> Carryout all maintenance work as per PPM jobs cards. Maintains level of main gas tanks and routine inspections. Able to install new equipment when necessary. Maintains all Kitchen, Refrigeration and Laundry equipment to ensure maximum efficiency. Maintains walk-in freezer temperature records as per Municipality requirement Keeps Kitchen mechanical rooms clean and in good order. To carry out any other reasonable duties and responsibilities as assigned and should be multi-tasking. To respond to changes in the (enter function) function as dictated by the industry, company or the Hotel. <br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><strong>Telecom Transmission Systems</strong></p><ul><li><p>Perform installation, maintenance, and troubleshooting of:</p><ul><li><p>SDH Systems</p></li><li><p>PDH Systems</p></li><li><p>DWDM Systems</p></li><li><p>Metro Ethernet Systems</p></li><li><p>Microwave Radio Systems</p></li><li><p>Fiber Optic Cable Networks</p></li><li><p>AC/DC UPS Systems</p></li></ul></li><li><p>Conduct fiber optic splicing, termination, testing, and troubleshooting using OTDR and power meters.</p></li><li><p>Monitor and maintain transmission equipment, sub-racks, modules, and network interfaces.</p></li><li><p>Replace faulty cards, modules, power supplies, and associated telecom hardware.</p></li><li><p>Perform cable routing, patching, labeling, and documentation activities.</p></li></ul><p><strong>Radio Communication Systems</strong></p><ul><li><p>Install, maintain, and troubleshoot:</p><ul><li><p>UHF Analog and DMR Radio Systems</p></li><li><p>VHF Radio Systems</p></li><li><p>TETRA Systems</p></li><li><p>NDB Systems</p></li><li><p>Point-to-Point (PTP) Radio Links</p></li><li><p>Point-to-Multipoint (PMP) Broadband Wireless Systems</p></li><li><p>Marine and Airband Radios</p></li><li><p>TEMPSC Communication Systems</p></li><li><p>Remote Radio Controllers</p></li></ul></li><li><p>Perform RF testing, antenna alignment, VSWR measurements, and coverage verification.</p></li><li><p>Install and maintain antennas, feeders, connectors, grounding kits, and mounting accessories.</p></li><li><p>Support commissioning and fault rectification of radio base stations, repeaters, handheld, mobile, and fixed radios.</p></li></ul><p><strong>Industrial Telecommunication Systems</strong></p><ul><li><p>Maintain and troubleshoot:</p><ul><li><p>Hotline Telephone Systems</p></li><li><p>Field Telephone Systems (Analog &amp; IP)</p></li><li><p>Satellite Phone Systems</p></li><li><p>Weather Monitoring Systems</p></li><li><p>Nurse Call Systems</p></li><li><p>Intrusion Detection Systems (IDS)</p></li><li><p>Perimeter Intrusion Detection Systems (PIDS)</p></li><li><p>Personnel Tracking Systems (PTS)</p></li><li><p>Telecom Tower Light (ACWL) Systems</p></li><li><p>Entertainment and TV Distribution Systems</p></li></ul></li><li><p>Conduct periodic inspections, testing, and functional verification of field devices.</p></li><li><p>Replace defective equipment and restore system functionality.</p></li></ul><p><strong>Preventive Maintenance</strong></p><ul><li><p>Execute scheduled preventive maintenance activities in accordance with approved maintenance procedures and OEM recommendations.</p></li><li><p>Perform visual inspections, health checks, cleaning, testing, calibration verification, and performance monitoring.</p></li><li><p>Identify potential failures and recommend corrective actions.</p></li><li><p>Update maintenance records and asset inventories.</p></li><li><p>Ensure all systems remain fully operational and compliant with operational requirements.</p></li></ul><p><strong>Corrective Maintenance</strong></p><ul><li><p>Attend fault calls and breakdown maintenance activities.</p></li><li><p>Perform fault diagnosis, troubleshooting, repairs, and restoration of telecom systems.</p></li><li><p>Replace faulty hardware and carry out required programming and reconfiguration.</p></li><li><p>Escalate complex faults to Telecom Engineers and OEM support when necessary.</p></li><li><p>Participate in emergency maintenance activities to restore critical communications systems within agreed response times.</p></li></ul><p><strong>Testing and Commissioning</strong></p><ul><li><p>Conduct equipment installation, testing, and commissioning activities.</p></li><li><p>Use specialized telecom test equipment including:</p><ul><li><p>OTDR</p></li><li><p>RF Test Equipment</p></li><li><p>Antenna Analyzer</p></li><li><p>Ethernet Tester</p></li><li><p>Network Tester</p></li><li><p>Thermal Imaging Tools</p></li><li><p>Digital Multimeters</p></li></ul></li><li><p>Verify equipment functionality before handover to operations.</p></li></ul><p><strong>Documentation and Reporting</strong></p><ul><li><p>Maintain accurate maintenance logs and service reports.</p></li><li><p>Record fault history, corrective actions, and equipment replacements.</p></li><li><p>Update drawings, system records, cable schedules, and asset databases.</p></li></ul><p>Assist in preparing preventive and corrective maintenance reports</p><br><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications</strong></p><ul><li><p>Diploma</p></li><li><p>Related Technical Discipline</p></li></ul><br><p><strong>Technical Skills</strong></p><ul><li><p>Fiber Optic Testing and Splicing</p></li><li><p>SDH / PDH / DWDM Systems</p></li><li><p>Microwave Communication Systems</p></li><li><p>UHF / VHF / DMR / TETRA Radio Systems</p></li><li><p>IP Networking Fundamentals</p></li><li><p>AC/DC Power Systems and UPS</p></li><li><p>RF Testing and Troubleshooting</p></li><li><p>Telecom Cabling Infrastructure</p></li><li><p>Preventive and Corrective Maintenance Practices</p></li></ul><p><strong>Preferred Certifications</strong></p><ul><li><p>Fiber Optic Technician Certification</p></li><li><p>Radio Communication Systems Training</p></li><li><p>OEM Equipment Certifications</p></li><li><p>H2S Safety Training</p></li><li><p>Offshore Safety (HUET / BOSIET)</p></li><li><p>Working at Heights Certification</p></li><li><p>Rigging and Slinging Certification (for tower work)</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Troubleshooting and fault-finding skills</p></li><li><p>Technical problem-solving ability</p></li><li><p>Teamwork and communication</p></li><li><p>Safety awareness</p></li><li><p>Ability to work in remote and offshore environments</p></li><li><p>Time management and documentation skills</p></li><li><p>Ability to support 24/7 operational telecom systems<br></p></li></ul><br><p></p></section>

Overview<br><br>The Computer Service Technician applies understanding, knowledge, and guidance of information systems hardware and software to provide problem resolution, problem diagnosis and solutions in a service center environment; clearly communicate technical solutions in a user-friendly professional manner. They are responsible for recognizing, researching, isolating and resolving first level information systems problems for appropriate service, repairs, training and follow-up. Also performs technical inspections for all work processed in the Automated Data Processing Equipment (ADPE) Bench. Perform other duties as assigned.<br><br>Responsibilities<br><br> Provide technical maintenance and service for all ADPE equipment. (20%) Evaluate equipment for malfunctions and deficiencies. (20%) Performs baseline procedures, and hardware replacement. (20%) Work closely with the Systems Support Specialist, Lead (SSSL) to determine serviceability of workstations, monitors, printers, servers, and other computer peripherals. (15%) Is responsible for all final technical inspections and ensures the appropriate status entry is made in the work order tracking system. (15%) Performs monthly UBL inventories and assist with cyclical property inventories. (5%) Performs other duties and assignments as required. (5%) <br><br>Qualifications<br><br> Minimum Qualifications Education/Certifications: Three years related experience may be substituted for one year of education, if degree is required. College degree or equivalent experience. Comp TIA A+ or equivalent Certification is a plus. Experience: 3+ years of related experience. Skills: Capable of effectively communicating technical information in English, both written and verbal. Possess Advanced PC technical support skills Time management and organizational skills Must be proficient using the latest version of Microsoft Office Experience using Maximo work order system or similar system Pursuant to KRH subcontract English competency levels: Reading ability – level 3 Speaking ability – level 3 Writing ability – level 3 Working Environment: Work is generally conducted in a work center administrative environment. However, duties may occasionally involve working outside with a potential exposure to extreme temperatures. Employee use of personal protective equipment (PPE) in certain areas is required. Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision and hearing protective devices. Normal work week is 48 hours but may be required to work overtime. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

Overview<br><br>The Computer Service Technician applies understanding, knowledge, and guidance of information systems hardware and software to provide problem resolution, problem diagnosis and solutions in a service center environment; clearly communicate technical solutions in a user-friendly professional manner. They are responsible for recognizing, researching, isolating and resolving first level information systems problems for appropriate service, repairs, training and follow-up. Also performs technical inspections for all work processed in the Automated Data Processing Equipment (ADPE) Bench. Perform other duties as assigned.<br><br>Responsibilities<br><br> Provide technical maintenance and service for all ADPE equipment. (20%) Evaluate equipment for malfunctions and deficiencies. (20%) Performs baseline procedures, and hardware replacement. (20%) Work closely with the Systems Support Specialist, Lead (SSSL) to determine serviceability of workstations, monitors, printers, servers, and other computer peripherals. (15%) Is responsible for all final technical inspections and ensures the appropriate status entry is made in the work order tracking system. (15%) Performs monthly UBL inventories and assist with cyclical property inventories. (5%) Performs other duties and assignments as required. (5%) <br><br>Qualifications<br><br> Minimum Qualifications Education/Certifications: Three years related experience may be substituted for one year of education, if degree is required. College degree or equivalent experience. Comp TIA A+ or equivalent Certification is a plus. Experience: 3+ years of related experience. Skills: Capable of effectively communicating technical information in English, both written and verbal. Possess Advanced PC technical support skills Time management and organizational skills Must be proficient using the latest version of Microsoft Office Experience using Maximo work order system or similar system Pursuant to KRH subcontract English competency levels: Reading ability – level 3 Speaking ability – level 3 Writing ability – level 3 Working Environment: Work is generally conducted in a work center administrative environment. However, duties may occasionally involve working outside with a potential exposure to extreme temperatures. Employee use of personal protective equipment (PPE) in certain areas is required. Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision and hearing protective devices. Normal work week is 48 hours but may be required to work overtime. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

Additional Information<br><br>Job Number 26101671<br><br>Job Category Engineering & Facilities<br><br>Location Conference Centre Street, Doha, Qatar, Qatar, 14022VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 3 years of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: EPA Universal Certification<br><br>Driver's License<br><br>HVAC Certification<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

As the Sanitary Sewer System Technician, you will be responsible for the operation, maintenance, inspection, and repair of sanitary sewer infrastructure to ensure safe, reliable, and efficient wastewater management.<br><br>Essential Job Functionbs<br><br>Perform installation, maintenance, repair, and inspection of sanitary sewer lines, manholes, lift stations, and associated wastewater infrastructure. Troubleshoot and resolve complex plumbing and sewer system issues, including blockages, leaks, and pipe failures. Conduct preventive maintenance on sewer systems to reduce emergency repairs and minimize service disruptions. Operate and maintain equipment and tools used in sewer system operations, such as jetting trucks, vacuum trucks, video inspection cameras, and pipe locators. Ensure compliance with all federal, state, and local regulations regarding wastewater treatment and sewer system safety. Maintain accurate records of maintenance, inspections, and repairs performed on sewer infrastructure. Respond to emergency sewer service calls, including after-hours incidents. Collaborate with team members, contractors, and the public to coordinate sewer system work efficiently and safely. Adhere to all safety policies and procedures, including confined space entry and hazardous materials handling.<br><br>Education & Experience<br><br>High School Diploma or equivalent Must be a current Master or Journeyman Plumber Minimum of 5 years of experience working in wastewater or sanitary sewer systems. Strong knowledge of wastewater treatment, sewer maintenance procedures, and plumbing codes. Proficient in using sewer inspection and maintenance equipment. Ability to read and interpret technical plans, blueprints, and schematics.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

As the Sanitary Sewer System Technician, you will be responsible for the operation, maintenance, inspection, and repair of sanitary sewer infrastructure to ensure safe, reliable, and efficient wastewater management.<br><br>Essential Job Functionbs<br><br>Perform installation, maintenance, repair, and inspection of sanitary sewer lines, manholes, lift stations, and associated wastewater infrastructure. Troubleshoot and resolve complex plumbing and sewer system issues, including blockages, leaks, and pipe failures. Conduct preventive maintenance on sewer systems to reduce emergency repairs and minimize service disruptions. Operate and maintain equipment and tools used in sewer system operations, such as jetting trucks, vacuum trucks, video inspection cameras, and pipe locators. Ensure compliance with all federal, state, and local regulations regarding wastewater treatment and sewer system safety. Maintain accurate records of maintenance, inspections, and repairs performed on sewer infrastructure. Respond to emergency sewer service calls, including after-hours incidents. Collaborate with team members, contractors, and the public to coordinate sewer system work efficiently and safely. Adhere to all safety policies and procedures, including confined space entry and hazardous materials handling.<br><br>Education & Experience<br><br>High School Diploma or equivalent Must be a current Master or Journeyman Plumber Minimum of 5 years of experience working in wastewater or sanitary sewer systems. Strong knowledge of wastewater treatment, sewer maintenance procedures, and plumbing codes. Proficient in using sewer inspection and maintenance equipment. Ability to read and interpret technical plans, blueprints, and schematics.<br><br>Additional Requirements<br><br>Must possess a valid U. S. Driver’s License Possess a valid U. S. Passport (preferred) Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

A Snapshot of Your Day<br><br>We are seeking a highly skilled and experienced Workshop Repair Technician with a strong background in machining and rotating equipment repairs such as (turbo and reciprocating compressors, steam and gas turbines.) The ideal candidate will have hands-on expertise in operating horizontal lathes, boring machines, and small milling machines, combined with the ability to perform precision inspections, generate technical drawings, and support continuous improvement initiatives within the workshop.<br><br>How You’ll Make An Impact<br><br>Operate horizontal lathes, boring machines, and milling machines for precision machining tasks. Has the knowledge to Perform complex repairs on turbo compressors, reciprocating compressors, steam turbines, and gas turbines. Execute reverse engineering for worn or damaged components. Conduct detailed dimensional inspections of parts using precision measuring tools. Prepare comprehensive inspection reports and maintain accurate documentation. Generate 2D and 3D CAD drawings for components and assemblies. Support reverse engineering projects and contribute to design improvements. Collaborate on process improvements and workshop development initiatives. Promote and maintain a strong safety culture in all activities. Utilize MS Office for reporting, documentation, and communication.<br><br><br>What You Bring<br><br>Diploma or Technical Certification in Mechanical Engineering or Machining with 10+ years of experience in rotating equipment repairs and machining operations. Proven ability to operate horizontal lathes, boring machines, and milling machines. Strong knowledge of turbo compressors, reciprocating compressors, steam turbines, and gas turbines repair processes. Proficiency in CAD software (Auto CAD, Inventor, Solid Works, or equivalent). Familiarity with reverse engineering techniques and precision measurement tools. Excellent understanding of safety standards and workshop best practices. Multi-tasking and adaptability in a fast-paced environment. Strong analytical and problem-solving skills with creative mindset for process improvement and innovation. Effective communication and teamwork abilities.<br><br><br>About The Team<br><br>Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Opportunity to work on challenging projects in an exciting environment Opportunity for remote/flexible work Professional support and strong collaboration with colleagues around the world Professional development opportunities within the company<br><br><br>https://jobs.siemens-energy.com/jobs

Job Summary<br><br>The role holder is responsible for the preventive maintenance, repair, overhaul and troubleshooting of rotating equipment (steam turbine, gas turbine, centrifugal / reciprocating compressors and pumps) and its auxiliaries. Familiarised completely with the allocated area of work, the equipment / machinery involved and general idea of the process for which he is responsible for the maintenance activities.<br><br>The role holder will carry out day to day basic maintenance jobs independently under normal supervision. Housekeeping is an important issue, as is the proper use and maintenance of tools and equipment. The role holder must ensure that all the activities are carried out in compliance with QAFCO occupational health, Quality, Safety, Energy and Environment procedures.<br><br>Key Accountabilities<br><br>Carry out the assigned day-to-day routine and non-routine maintenance activities independently under normal supervision to ensure work is completed on time and to quality standards. Provide advice on completion of work verbally or completing work sheets in order that superior can effectively monitor overall work progress against plans. Gain approval for cold work permits in order to facilitate the execution of assigned tasks in compliance with safety requirements. Conduct toolbox meeting to discuss scheduled work activities and ensure correct tools and safety equipment are available prior to commencement of work. Identify and report problems / findings to immediate superior in order to avert possible malfunction of equipment. Adhere strictly to safety procedures, including lock out/tag out (LOTO), isolation standards, and hazardous area requirements during rotating equipment maintenance. Ensure strict adherence to all safety procedures and permit to work requirements, including LOTO, confined space guidelines, handling of hazardous materials, and safe use of lifting equipment, to always maintain a safe working environment. Use precision measuring tools accurately—such as micrometers, vernier calipers, dial indicators, feeler gauges, and bore gauges—to verify tolerances, measure components, and ensure equipment is assembled to the required specifications Perform basic rigging and lifting activities in accordance with approved lifting plans and safety procedures, including the safe use of slings, shackles, chain blocks, and hoists to move rotating equipment components during maintenance tasks. Lead group of contracted manpower to carry out specific tasks during shutdown. Perform routine condition checks on rotating equipment such as pumps, compressors, turbines, and motors, including vibration readings, temperature checks, and lubrication inspections. Carry out alignment tasks (soft foot correction, preliminary alignment checks, and final alignment activities) using appropriate tools such as dial gauges and laser alignment systems. Assist in the dismantling and assembly of rotating equipment, ensuring proper handling of bearings, seals, couplings, and precision components in accordance with standard procedures. Conduct cleaning, inspection, and minor refurbishment of equipment parts (e.g., filters, strainers, oil systems, bearing housings) to maintain equipment reliability. Support lubrication activities, including oil changes, grease application, and sample collection for oil analysis, ensuring correct grades and quantities are used. Perform basic diagnostics during equipment abnormalities, including unusual vibration, noise, temperature rise, or leakage, and immediately report findings to the supervisor. Ensure proper storage, handling, and preservation of spare parts, especially precision components such as bearings, seals, and couplings. Maintain tools, instruments, and workshop equipment in good condition and ensure calibration schedules for measurement tools are followed. Follow equipment-specific maintenance procedures and OEM instructions during routine and corrective maintenance tasks. Assist engineers and senior technicians during major overhauls, turnarounds, and shutdown activities involving rotating equipment. Complete work notifications and feedback in SAP, ensuring accurate reporting of tasks performed, materials used, and equipment condition.<br><br>Desired Candidate Profile<br><br>Minimum of High School + 2 years Diploma in relevant discipline Minimum of 5 years direct experience working in Fertilizer, Petrochemical, Chemical, or Oil & Gas Industry. Ability to work independently and in a team, with strong communication, troubleshooting and problem-solving skills. Good knowledge of maintenance of steam turbines, gas turbines, centrifugal compressors, reciprocating compressors, couplings, different bearing types, mechanical seals, and dry gas seals. In addition to, different types of valves, exchangers, pressure relieving devices, lubricant, and their function, selection criteria and usage. Familiar with engineering drawings, specifications and documentation. Familiar with different types of precision measuring tools and can use accurately

A Snapshot of Your Day<br><br>We are seeking a highly skilled and experienced Workshop Repair Technician with a strong background in machining and rotating equipment repairs such as (turbo and reciprocating compressors, steam and gas turbines.) The ideal candidate will have hands-on expertise in operating horizontal lathes, boring machines, and small milling machines, combined with the ability to perform precision inspections, generate technical drawings, and support continuous improvement initiatives within the workshop.<br><br>How You’ll Make An Impact<br><br>Operate horizontal lathes, boring machines, and milling machines for precision machining tasks. Has the knowledge to Perform complex repairs on turbo compressors, reciprocating compressors, steam turbines, and gas turbines. Execute reverse engineering for worn or damaged components. Conduct detailed dimensional inspections of parts using precision measuring tools. Prepare comprehensive inspection reports and maintain accurate documentation. Generate 2D and 3D CAD drawings for components and assemblies. Support reverse engineering projects and contribute to design improvements. Collaborate on process improvements and workshop development initiatives. Promote and maintain a strong safety culture in all activities. Utilize MS Office for reporting, documentation, and communication.<br><br><br>What You Bring<br><br>Diploma or Technical Certification in Mechanical Engineering or Machining with 10+ years of experience in rotating equipment repairs and machining operations. Proven ability to operate horizontal lathes, boring machines, and milling machines. Strong knowledge of turbo compressors, reciprocating compressors, steam turbines, and gas turbines repair processes. Proficiency in CAD software (Auto CAD, Inventor, Solid Works, or equivalent). Familiarity with reverse engineering techniques and precision measurement tools. Excellent understanding of safety standards and workshop best practices. Multi-tasking and adaptability in a fast-paced environment. Strong analytical and problem-solving skills with creative mindset for process improvement and innovation. Effective communication and teamwork abilities.<br><br><br>About The Team<br><br>Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Opportunity to work on challenging projects in an exciting environment Opportunity for remote/flexible work Professional support and strong collaboration with colleagues around the world Professional development opportunities within the company<br><br><br>https://jobs.siemens-energy.com/jobs

A Snapshot of Your Day<br><br>We are seeking a highly skilled and experienced Workshop Repair Technician with a strong background in machining and rotating equipment repairs such as (turbo and reciprocating compressors, steam and gas turbines.) The ideal candidate will have hands-on expertise in operating horizontal lathes, boring machines, and small milling machines, combined with the ability to perform precision inspections, generate technical drawings, and support continuous improvement initiatives within the workshop.<br><br>How You’ll Make An Impact<br><br>Operate horizontal lathes, boring machines, and milling machines for precision machining tasks. Has the knowledge to Perform complex repairs on turbo compressors, reciprocating compressors, steam turbines, and gas turbines. Execute reverse engineering for worn or damaged components. Conduct detailed dimensional inspections of parts using precision measuring tools. Prepare comprehensive inspection reports and maintain accurate documentation. Generate 2D and 3D CAD drawings for components and assemblies. Support reverse engineering projects and contribute to design improvements. Collaborate on process improvements and workshop development initiatives. Promote and maintain a strong safety culture in all activities. Utilize MS Office for reporting, documentation, and communication.<br><br><br>What You Bring<br><br>Diploma or Technical Certification in Mechanical Engineering or Machining with 10+ years of experience in rotating equipment repairs and machining operations. Proven ability to operate horizontal lathes, boring machines, and milling machines. Strong knowledge of turbo compressors, reciprocating compressors, steam turbines, and gas turbines repair processes. Proficiency in CAD software (Auto CAD, Inventor, Solid Works, or equivalent). Familiarity with reverse engineering techniques and precision measurement tools. Excellent understanding of safety standards and workshop best practices. Multi-tasking and adaptability in a fast-paced environment. Strong analytical and problem-solving skills with creative mindset for process improvement and innovation. Effective communication and teamwork abilities.<br><br><br>About The Team<br><br>Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Opportunity to work on challenging projects in an exciting environment Opportunity for remote/flexible work Professional support and strong collaboration with colleagues around the world Professional development opportunities within the company<br><br><br>https://jobs.siemens-energy.com/jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p><span><b>Job Description</b></span></p><br><br><br><br><p><b>IBDP/HSD Design Technology Technician </b></p><br><br><p><b>Job Description</b></p><br><br><p><b>Type: </b>Permanent</p><br><br><p><b>Department:</b> Academic</p><br><br><p><b>Line Manager:</b> Head of Secondary</p><br><br><p><b>Functional Reporting</b>: N/A</p><br><br><p>______________________________________________________________________________</p><br><br><p><b>Key Duties and Areas of Responsibility</b></p><br><br><ul><li>Prepares resources, tools, and equipment for Design &amp; Technology lessons, including hard materials (woods, metals, plastics), art processes, and electronic components.</li><li>Sets up, operates, and maintains workshop machinery (e.g., saws, drills, sanders) and new technologies (e.g., laser cutters, 3D printers, CNC machines).</li><li>Conducts regular checks and routine maintenance of all DT equipment and machinery, reporting any faults or safety concerns to the Head of Department.</li><li>Orders, inventories, and manages stock levels of materials, tools, and consumables, ensuring supplies are available for planned lessons and projects.</li><li>Assists teaching staff during practical sessions as required, providing technical support to students and helping to demonstrate safe and correct use of tools and equipment.</li><li>Maintains a clean, organised, and hazard-free workshop environment, including the safe storage of tools, sharp objects, and hazardous materials.</li><li>Supports the preparation of displays, models, and exemplar work to aid teaching and learning.</li><li>Provides basic IT support for DT-specific software (e.g., CAD/CAM programs, 3D printing slicers) and assists students and staff with file preparation for laser cutting and 3D printing.</li><li>Keeps accurate records of equipment usage, maintenance logs, and safety inspections.</li></ul><br><p><b>Other duties and responsibilities</b></p><br><br><p>Any other duties that the Principal may from time to time ask the post-holder to perform</p><br><br><br><p><b>Position Requirements</b></p><br><br><p><b>Education:</b></p><br><br><ul><li>High school diploma or equivelant.</li><li>Minimum&nbsp;<b>3 years of similar experience.</b></li><li>Understanding modern DT, including product design, digital tools, materials, and design processes.</li><li>Excellent communication, organization, and classroom management skills.</li><li>A reflective, collaborative, and innovative educator committed to continuous improvement.</li></ul><p><b>Language</b>: English is mandatory</p><br><br><br><p><b>Required Skills and Knowledge </b></p><br><br><p><b>Knowledge</b></p><br><br><p><b>Competencies</b></p><br><br><ul><li>In-depth knowledge and understanding of School and associated assessment methods</li><li>Up to date curriculum developments</li><li>Application of effective teaching and learning theory and practice of providing effectively for the individual needs of all children (e.g. classroom organisation and learning strategies)</li><li>Proven management skills</li><li>Excellent communication skills and command of the English language, in spoken and written form</li><li>Presentation skills with the ability to present information in a concise and professional manner to a variety of audiences</li><li>Organization skills: well organized and able to prioritize, multi tasks and meet deadlines</li><li>The ability to work on a regular and punctual basis</li><li>Flexible and work well under pressure</li><li>Customer service</li><li>Critical thinking</li><li>Ability to negotiate, persuade and motivate others</li><li>Willing attitude to be a part of the school team</li><li>Strong sense of professionalism</li><li>Safeguarding and welfare of children</li><li>A collaborative team-player with excellent interpersonal skills whilst recognizing and transcending cultural differences</li><li>The ability to develop good personal relationships within a team</li><li>Behaviour management</li><li>Demonstrated competency to use computer applications related to the role, including word processing and spreadsheet applications</li><li>Accurate data collection ability</li><li>Record keeping and report preparation methods</li><li>Interpersonal skills including tact, courtesy and patience</li><li>Customer focused</li><li>Willingness to undertake appropriate Professional Development</li></ul><p><b>Attributes</b></p><br><br><ul><li>Empathetic listener</li><li>Integrity and confidentiality</li><li>Internationally minded</li><li>Emotional intelligence</li><li>Intercultural awareness, creative</li><li>Flexible and a can-do attitude</li><li>Passionate about delivering quality education</li><li>Able to command respect of pupils, colleagues and parents</li><li>Driven by wanting to improve quality and develop the school</li><li>Reliable with an attention to detail and a commitment to quality</li><li>An innovator with a willingness to embrace change</li></ul><br><p><span><b>ISP Principles</b></span></p><br><br><p><b>Begin with our children and students</b>. Our children and students are at the heart of what we do. Simply, their success is our success. Wellbeing and safety are both essential for learners and learning. Therefore, we are consistent in identifying potential safeguarding</p><br><br><p>and Health &amp; Safety issues and acting and following up on all concerns appropriately.</p><br><br><p><b>Treat everyone with care and respect</b>. We look after one another, embrace similarities and differences and promote the well-being of self and others.</p><br><br><p><b>Operate effectively.</b> We focus relentlessly on the things that are most important and will make the most difference. We apply school policies and procedures and embody the shared ideas of our community.</p><br><br><p><b>Are financially responsible.</b> We make financial choices carefully based on the needs of the children, students and our schools.</p><br><br><p><b>Learn continuously.</b> Getting better is what drives us. We positively engage with personal and professional development and school improvement.</p><br><br><br><p><span><b>ISP Commitment to Safeguarding Principles</b></span></p><br><br><br><p>ISP is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. All post holders are subject to appropriate vetting procedures, including an online due diligence search, references and satisfactory Criminal Background Checks or equivalent covering the previous 10 years’ employment history.</p><br><br><br><p><span><b>ISP Commitment to Diversity, Equity, Inclusion, and Belonging</b></span></p><br><br><br><p>ISP is committed to strengthening our inclusive culture by identifying, hiring, developing, and retaining high-performing teammates regardless of gender, ethnicity, sexual orientation and gender expression, age, disability status, neurodivergence, socio-economic background or other demographic characteristics. Candidates who share our vision and principles and are interested in contributing to the success of ISP through this role are strongly encouraged to apply.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br><p>As a Microsoft Data Center Inventory &amp; Asset Technician (DIAT), you will perform cycle audits, execute incoming/outgoing deliveries, coordinate security escorts for third-party vendors, and document inbound and outbound deliveries. This opportunity will allow you to deepen your knowledge of inventory management principles, warranty process management, data bearing device destruction and advance your career in the process.</p><br><p>Microsoft’s Cloud Operations &amp; Innovation (CO+I) is the engine that powers our cloud services. As a CO+I DIAT, you will perform a key role in delivering the core infrastructure and foundational technologies for Microsoft's online services including Bing, Office 365, Xbox, OneDrive, and the Microsoft Azure platform. As a group, CO+I is focused on the personal and professional development of all employees and offers training and opportunities including Career Rotation Programs, Diversity &amp; Inclusion training and events, and professional certifications.</p><br><p>Our infrastructure is comprised of a large global portfolio of more than 200 Data Centers in 32 countries and millions of servers. Our foundation is built upon and managed by a team of subject matter experts working to support services for more than 1 billion customers and 20 million businesses in over 90 countries worldwide.</p><br><p>With environmental sustainability and optimization at the forefront of our data center design and operations, we continue to grow and evolve as we meet the ever-changing business demands that hold Microsoft as a world-class cloud provider.</p><br><p>Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond.</p><br><br><b>Responsibilities</b><br><p><strong>Responsibilities</strong></p><br><ul><li>Perform assigned tasks and escalate issues during high-volume work activity or escalation-based situations.</li><li>Coordinate with suppliers to initiate warranty claim and process failed vendor hardware devices.&nbsp; This includes information processing, packaging, shipment, and receipt of return for Return Merchandise Authorization (RMA) devices following all Service Level Agreements (SLAs) related to RMA warranty process.</li></ul><ul><li>Leverage process knowledge and best judgment to complete tasks with minimal direct supervision.</li></ul><ul><li>Maintains a strong focus to understand the impact of their work when completing tickets and assigned Inventory and Asset Management (IAM) tasks.</li></ul><ul><li>Maintains and steward up-to-date and accurate logical information within various inventory management systems (e.g., configuration management databases, asset management repositories).</li><li>Ensures detailed physical inventory tracking and staging.</li></ul><ul><li>Help to reconcile and report inventory discrepancies.</li></ul><ul><li>Performs destruction of data bearing devices (DBD) following all Service Level Agreements (SLAs) and Microsoft policies as necessary.</li></ul><ul><li>Notifies management about ordering stock shortages. Escalates any issues to management.</li></ul><ul><li>Comply with security and data management policies.</li><li>Embody our culture and values.</li></ul><br><b>Qualifications</b><br><p><strong><span>Required Qualifications</span></strong></p><br><ul><li>High School Diploma AND experience warehouse/supply chain in an information technology (IT) environment, inventory management, retail, warehouse management, or a related field.<ul><li>OR equivalent experience.</li></ul></li></ul><ul><li>Ability to work shifts, including shift assignments during non-standard business hours that may include evening, nighttime, weekends, and/or holidays</li></ul><p><strong>Background Check Requirements:&nbsp;</strong></p><br><p>Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings:&nbsp;</p><br><ul><li>Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.</li></ul><p>While not required, we also look for the following<strong> <em><span>Preferred</span></em><span> Qualifications</span>: </strong></p><br><ul><li>2+ year(s) experience in warehouse/supply chain in an information technology (IT) environment, IT, and/or logistics, operating heavy-load movement equipment (e.g., forklift, pallet jacks, chassis lifts) for a large corporation<ul><li>OR equivalent experience.</li></ul></li></ul> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>