Planning Engineer Jobs in Qatar

Primary Purpose Of The Job<br><br>Provide daily process optimization support to monitor the performance of process and utility systems and equipment, ensuring production targets and product specifications are met. Offer suitable recommendations to operations in the event of deviations. Assess and validate chemical performance through systematic evaluation and identify new chemicals for improvement by coordinating with chemical suppliers. Chair the Panel Review Meeting for all Technical MoC and evaluate all the proposals for process improvements and classify them either as In-house project under Dukhan Operation, RES or Project Initiation Note (PIN) for VP project, based on initial screening. Prepare the project initiation note statement of requirement (PIN-SOR), incorporating all requirements for proposed projects. Ensure the SOR document complies with VP procedures, Qatar Energy guidelines, Shell DEP’s, and approved standards to fully address the asset owner's needs. Perform adequacy checks of the existing facility for optimization purposes and assess any bottlenecks or limitations of facility performance and reliability through best practices of process optimization to enhance asset operational integrity. Develop and select technology options for feasibility and concept optimization studies to meet business targets. For external studies, participate in providing inputs and review all deliverables. Evaluate proven and new processes and technologies for operation, maintenance, or HSE improvements through projects and field trials, as required. Provide process engineering support for FEED and EPIC projects. Prepare and review project deliverables such as HMB, PFDs, P&IDs, datasheets, process descriptions, and line lists for process and utility systems. Define and review operating and integrity envelope philosophy for both process & utilities systems, including operating modes such as: normal steady state, transient (i.e. start‐up, shutdown, upset), pressure‐relief, etc.<br><br>Required Experience And Skills<br><br>10 to 12 years’ experience in Oil & Gas industry with a minimum 8 years working in the position of Senior Process Engineer. Experience in Process optimization, concept engineering and detailed design, commissioning and start-up of oil & Gas facilities, and preparation of feasibility studies and project engineering will be an added advantage. Excellent written and communication skills in English.<br><br>Educational Qualifications<br><br>B. Sc./ B. Tech/B. E. Degree in Chemical or Process Engineering discipline.

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

Job Summary We are seeking an experienced AV Pre-Sales & Design Engineer to design, develop, and support integrated Audio-Visual solutions for a wide range of projects. The successful candidate will be responsible for analyzing client requirements, preparing technical designs and proposals, developing project documentation, and providing technical support throughout the pre-sales process. Key Responsibilities System Design Design integrated AV systems, including but not limited to displays, LED video walls, projectors, audio systems, DSPs, control systems, video conferencing solutions, and AV network infrastructure. Select appropriate equipment based on technical requirements, performance, compatibility, reliability, and budget. Prepare system architecture diagrams, signal flow diagrams, rack layouts, equipment layouts, and other design documentation. Pre-Sales & Tender Support Develop detailed technical proposals, Bills of Quantities (BOQ/BOM), compliance statements, and technical submissions. Review tender specifications and ensure proposed solutions fully comply with or exceed client requirements. Coordinate with manufacturers and suppliers to obtain quotations, technical information, and product clarifications. Provide technical support to the sales team during client meetings, presentations, and tender clarification stages. Engineering Documentation Produce all AV engineering documentation required for project execution, including but not limited to:Shop drawings System schematics Rack elevations Signal flow diagrams Bills of Materials (BOM) Bills of Quantities (BOQ) Request for Information (RFI) responses Change Orders Installation drawings Operation & Maintenance (O&M) manuals As-built and project close-out documentation Prepare technical submittals and installation documentation in accordance with project specifications and client requirements. Qualifications & Experience Bachelor's Degree in Electronics Engineering or a related engineering discipline. Minimum 5 years of experience in the Audio-Visual (AV) industry, with a strong background in AV system design and pre-sales engineering. Demonstrated experience preparing AV system designs, technical proposals, BOQs, and tender documentation. Strong knowledge of professional AV technologies, including video conferencing, digital signal processing (DSP), AV-over-IP, control systems, and networking fundamentals. Preferred Certifications AVIXA CTS, CTS-D, or CTS-ICrestron Certification Extron Certification Dante Certification QSC Certification Other recognized professional AV industry certifications are an advantage.

Position: IT Network Specialist / Network Engineer Key Responsibilities Deploy, configure, and manage Cisco networking infrastructure including Nexus 7000 switches, Cisco ACI, Cisco Catalyst 3850/9300 access switches, and Wireless Controllers. Implement, maintain, and troubleshoot Cisco IP Telephony solutions to ensure reliable voice communications. Configure and administer F5 Load Balancers for traffic optimization, high availability, and redundancy. Manage and support enterprise firewall platforms including Cisco FTD, Cisco ASA, Palo Alto, and Fortinet. Configure and maintain secure remote connectivity solutions such as Cisco Any Connect VPN and Site-to-Site VPNs. Administer Meraki switches and security appliances within the enterprise network environment. Utilize Cisco Identity Services Engine (ISE) for network access control, policy enforcement, and secure authentication. Manage Azure networking services including Virtual Networks (VNet), Network Virtual Appliances (NVA), subscriptions, and regional deployments. Support Google Cloud Platform (GCP) networking services including VPC, Cloud Load Balancing, Cloud Armor, and Identity-Aware Proxy (IAP). Monitor, troubleshoot, and optimize network performance to ensure maximum uptime, security, and reliability. Required Qualifications Bachelor's degree in Information Technology, Computer Science, Engineering, or a related field. Hands-on experience managing Cisco networking technologies and enterprise network environments. Strong understanding of network infrastructure, routing, switching, and security concepts. Knowledge of network protocols, application transport technologies, and connectivity solutions. Experience using network monitoring, diagnostic, and analysis tools. Strong analytical, troubleshooting, and problem-solving abilities. Excellent communication and collaboration skills with the ability to work across technical and business teams. Self-motivated, dependable, and capable of working independently as well as within a team environment. Preferred Certifications (Not Mandatory) CCNACCNPPCNSAAZ-900AZ-700Preferred Skills Cisco Nexus 7K, Cisco ACI, Cisco Catalyst 3850/9300, Cisco Wireless Controllers, Cisco IP Telephony, F5 Load Balancer, Cisco FTD, Cisco ASA, Palo Alto, Fortinet, Cisco Any Connect VPN, Site-to-Site VPN, Meraki, Cisco ISE, Azure Networking, Virtual Networks (VNet), Network Virtual Appliances (NVA), GCP VPC, Cloud Load Balancing, Cloud Armor, Identity-Aware Proxy (IAP), Network Security, Routing & Switching.

Position: IT Network Specialist / Network Engineer Key Responsibilities Deploy, configure, and manage Cisco networking infrastructure including Nexus 7000 switches, Cisco ACI, Cisco Catalyst 3850/9300 access switches, and Wireless Controllers. Implement, maintain, and troubleshoot Cisco IP Telephony solutions to ensure reliable voice communications. Configure and administer F5 Load Balancers for traffic optimization, high availability, and redundancy. Manage and support enterprise firewall platforms including Cisco FTD, Cisco ASA, Palo Alto, and Fortinet. Configure and maintain secure remote connectivity solutions such as Cisco Any Connect VPN and Site-to-Site VPNs. Administer Meraki switches and security appliances within the enterprise network environment. Utilize Cisco Identity Services Engine (ISE) for network access control, policy enforcement, and secure authentication. Manage Azure networking services including Virtual Networks (VNet), Network Virtual Appliances (NVA), subscriptions, and regional deployments. Support Google Cloud Platform (GCP) networking services including VPC, Cloud Load Balancing, Cloud Armor, and Identity-Aware Proxy (IAP). Monitor, troubleshoot, and optimize network performance to ensure maximum uptime, security, and reliability. Required Qualifications Bachelor's degree in Information Technology, Computer Science, Engineering, or a related field. Hands-on experience managing Cisco networking technologies and enterprise network environments. Strong understanding of network infrastructure, routing, switching, and security concepts. Knowledge of network protocols, application transport technologies, and connectivity solutions. Experience using network monitoring, diagnostic, and analysis tools. Strong analytical, troubleshooting, and problem-solving abilities. Excellent communication and collaboration skills with the ability to work across technical and business teams. Self-motivated, dependable, and capable of working independently as well as within a team environment. Preferred Certifications (Not Mandatory) CCNACCNPPCNSAAZ-900AZ-700Preferred Skills Cisco Nexus 7K, Cisco ACI, Cisco Catalyst 3850/9300, Cisco Wireless Controllers, Cisco IP Telephony, F5 Load Balancer, Cisco FTD, Cisco ASA, Palo Alto, Fortinet, Cisco Any Connect VPN, Site-to-Site VPN, Meraki, Cisco ISE, Azure Networking, Virtual Networks (VNet), Network Virtual Appliances (NVA), GCP VPC, Cloud Load Balancing, Cloud Armor, Identity-Aware Proxy (IAP), Network Security, Routing & Switching.

Primary Purpose Of The Job<br><br>Provide daily process optimization support to monitor the performance of process and utility systems and equipment, ensuring production targets and product specifications are met. Offer suitable recommendations to operations in the event of deviations. Assess and validate chemical performance through systematic evaluation and identify new chemicals for improvement by coordinating with chemical suppliers. Chair the Panel Review Meeting for all Technical MoC and evaluate all the proposals for process improvements and classify them either as In-house project under Dukhan Operation, RES or Project Initiation Note (PIN) for VP project, based on initial screening. Prepare the project initiation note statement of requirement (PIN-SOR), incorporating all requirements for proposed projects. Ensure the SOR document complies with VP procedures, Qatar Energy guidelines, Shell DEP’s, and approved standards to fully address the asset owner's needs. Perform adequacy checks of the existing facility for optimization purposes and assess any bottlenecks or limitations of facility performance and reliability through best practices of process optimization to enhance asset operational integrity. Develop and select technology options for feasibility and concept optimization studies to meet business targets. For external studies, participate in providing inputs and review all deliverables. Evaluate proven and new processes and technologies for operation, maintenance, or HSE improvements through projects and field trials, as required. Provide process engineering support for FEED and EPIC projects. Prepare and review project deliverables such as HMB, PFDs, P&IDs, datasheets, process descriptions, and line lists for process and utility systems. Define and review operating and integrity envelope philosophy for both process & utilities systems, including operating modes such as: normal steady state, transient (i.e. start‐up, shutdown, upset), pressure‐relief, etc.<br><br>Required Experience And Skills<br><br>10 to 12 years’ experience in Oil & Gas industry with a minimum 8 years working in the position of Senior Process Engineer. Experience in Process optimization, concept engineering and detailed design, commissioning and start-up of oil & Gas facilities, and preparation of feasibility studies and project engineering will be an added advantage. Excellent written and communication skills in English.<br><br>Educational Qualifications<br><br>B. Sc./ B. Tech/B. E. Degree in Chemical or Process Engineering discipline.

Job Title: Senior Mechanical Engineer (Plumbing & Fire Protection – Design) Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design, coordination, and delivery of plumbing and fire protection systems for construction projects, ensuring efficient, compliant, and high-quality engineering solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. Plumbing System Design<br> Lead design of domestic water supply, drainage, sewage, storm water, and irrigation systems.<br> Perform hydraulic calculations, pipe sizing, and equipment selection (pumps, tanks, heaters, etc.).<br> Prepare design layouts, schematics, and detailed drawings.<br> B. Fire Protection System Design<br> Design firefighting systems including sprinkler systems, standpipes, fire hose reels, and fire pumps.<br> Perform hydraulic calculations and system sizing as per NFPA standards.<br> Prepare detailed design drawings and specifications for fire protection systems.<br> C. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of plumbing and firefighting systems within building design.<br> Identify and resolve design clashes using BIM tools.<br> D. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), NFPA, and local authority regulations.<br> Prepare and review design submissions for authority approvals.<br> Liaise with civil defense and relevant authorities when required.<br> E. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Participate in design reviews and value engineering initiatives.<br> F. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure compliance with approved design.<br> Support testing & commissioning of plumbing and firefighting systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification (mandatory / preferred as per company requirement)<br> 10–12 years of experience in plumbing & fire protection design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in plumbing and firefighting system design<br> Strong knowledge of NFPA codes, IPC/UPC, and local regulations<br> Proficiency in Auto CAD, Revit, BIM tools<br> Experience with hydraulic calculation software (e.g., Elite, Pipe Flow, etc.)

Job Title: Senior Mechanical Engineer (Plumbing & Fire Protection – Design) Location: Qatar<br> Department: MEP / Engineering<br> Experience: 10–12 years<br>1. Purpose of the Role To lead the design, coordination, and delivery of plumbing and fire protection systems for construction projects, ensuring efficient, compliant, and high-quality engineering solutions aligned with project requirements and international standards.<br>2. Key Responsibilities A. Plumbing System Design<br> Lead design of domestic water supply, drainage, sewage, storm water, and irrigation systems.<br> Perform hydraulic calculations, pipe sizing, and equipment selection (pumps, tanks, heaters, etc.).<br> Prepare design layouts, schematics, and detailed drawings.<br> B. Fire Protection System Design<br> Design firefighting systems including sprinkler systems, standpipes, fire hose reels, and fire pumps.<br> Perform hydraulic calculations and system sizing as per NFPA standards.<br> Prepare detailed design drawings and specifications for fire protection systems.<br> C. Design Coordination<br> Coordinate with architectural, structural, and other MEP disciplines.<br> Ensure proper integration of plumbing and firefighting systems within building design.<br> Identify and resolve design clashes using BIM tools.<br> D. Codes & Compliance<br> Ensure compliance with Qatar Construction Specifications (QCS), NFPA, and local authority regulations.<br> Prepare and review design submissions for authority approvals.<br> Liaise with civil defense and relevant authorities when required.<br> E. Technical Review<br> Review and approve shop drawings, material submittal, and method statements.<br> Respond to RFIs and provide technical clarifications.<br> Participate in design reviews and value engineering initiatives.<br> F. Construction Support<br> Provide technical support during the construction phase.<br> Conduct site inspections to ensure compliance with approved design.<br> Support testing & commissioning of plumbing and firefighting systems.<br> <br><br><br>Requirements<br><br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering<br> UPDA/MMUP Certification (mandatory / preferred as per company requirement)<br> 10–12 years of experience in plumbing & fire protection design within construction projects<br> Strong experience in consultancy or contractor design environment<br> Technical Skills Expertise in plumbing and firefighting system design<br> Strong knowledge of NFPA codes, IPC/UPC, and local regulations<br> Proficiency in Auto CAD, Revit, BIM tools<br> Experience with hydraulic calculation software (e.g., Elite, Pipe Flow, etc.)

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules Manage process design and any design changes within budget and schedule. Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Reviews documentation to assist others and reviews/authorizes work done by direct reports. Evaluate new technology advancements against existing design standards and revise where applicable. Identify and review new technology development which could be applicable in providing more cost-effective facilities. Perform discipline specific engineering services such as: Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. Quality Assurance: Responsible for working within the provisions and guidelines of the Quality Assurance systems. Safety: responsible for personal safety safe working practices. Understand and follow OH&S procedures Promoting health, safety and environmental awareness. <br><br>Industry Specific Experience<br><br> Must have process design in onshore/offshore oil & gas industry in a brownfield environment with focus on rotating equipments. FEED and detailed engineering experience essential. Decent experience in an engineering consultancy in a multidiscipline environment is essential.<br><br>Qualifications<br><br>Education – Qualifications, Accreditation, Training: <br><br> Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage<br><br>IT Skills<br><br>Simulations <br><br> Aspen suite, Hysys, Pipesys, Flare Net PRO-II<br><br>Flow Assurance<br><br> Pipe Net Pipesim PVTSim/OLGA Pipe Phase TLNET Fathom<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Job Summary:As a senior engineer, should be the first responsible person in charge of control discipline cost,quality and engineering progress, responsible for support procurement related activities. Developing the discipline implementation strategy, execution plan, interface management, report to COOEC counterpart and COOEC PMT Quarterly. Responsibilities:Cost controlling Provide optimizations suggestion to provide discipline contribution for project cost saving. Control unnecessary upgrade design , follow fit for purpose principles . Review and assess changes compare to FEED design, try best to follow FEED design. Control the change order from subcontractor and vendor. Quality Controlling Review engineering subcontractor deliverbale ensure deliverable quality meet standards and codes requirements. Control post AFC changes avoid unnecessary changes impact on the fabrication and procurement. Discipline Progress tracking and Controlling Tracking discipline progress (including 3D model, discipline specialist study and deliverable ) and control the negative variance below 3%. Detail analysis report should be submit to COOEC PMT if discipline deliverable progress exceed 3%. Working closely with engineering subcontractor ,vendor and Qatar Energy to resolve the bottleneck of deliverable issuance and ensure deliverable don’t further damage to other discipline ,procurement and fabrication acclivities. Procurement Technical Support Review and tracking the status of MRs, TBEs, Specs and Data sheets etc which related to procurement. Technical tender document review, technical clarification, bid evaluation document review ;Vendor document Review and participate equipment FAT. Prepare the FAT check list and FAT report, tracking the FAT comments close out status. Discipline management Participate the weekly meeting or other necessary discussion session related to process discipline. Communicate with subcontractor and vendor regularly ensure discipline work running smoothly. Discipline interface management with other discipline ,third party ,vendors, etc. Regulatory Compliance Ensure designs comply with applicable standards and regulations. Support environmental and emissions management initiatives. Participate in audits and regulatory reviews. Reporting Relationships Reports To:Department manager Process discipline head PMTInterfaces With:Client Subcontractor counterpart Third party Vendor

Important: Please apply only if you are currently Qatar MMUP/UPDA certified as a First Category Engineer with the residency.<br>Applications that do not meet this mandatory requirement will not be considered.<br>Interested candidates shall submit their updated CV along with a copy/details of their MMUP/UPDA First Category registration.<br>Who We Are:<br>Técnicas Reunidas (TR) is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in an international environment. Our commitment to people has been recognized with the Top Employer certification in Spain and India.<br>Global Projects and the Energy of the Future:<br>At TR, we develop projects in Oil & Gas and Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards.<br>Specific functions:<br>Knowledge / application of Procedures, Specifications and Project rules by all the members of each Project. Estimation of quantities in the Proposal phase. Assessment / Criticism of Geotechnical Studies and consequences derived from it. Calculation and design of Land preparation / earthmoving work. Calculation and design of Infrastructures / Urbanization / Rainwater collectors. Calculation and design of roads and pavements of the Unit. Calculation of shallow and piloted foundations (structures / equipment). Calculation of foundations for equipment subjected to dynamic actions. Calculation of foundations and structures (metal / concrete) trays / pipe supports. Calculation of foundations and structures (metal / concrete) Industrial buildings. Calculation of foundations and structure (metal / concrete) BLAST-PROOF buildings. Calculation of underground facilities (rafts, ditches, manholes, buried pipes, ditches, etc.) Approval of drawings from the Metallic Structure Workshop. Subcontract management (process units, buildings, platforms, etc.) Software management (STAADPRO, FOUNDATION 3D, MAT 3D, STORMCAD, etc.) Architecture design of buildings, facades, roofs, finished tables, plumbing, sanitation, etc. (SECTION only: ARCHITECTURE) Compliance with deadlines according to the Project Program. Control over the Engineering Hours budgets and those derived from the Work Units, calculated and designed in the Department, always taking as reference the values that served as the basis during the Proposal phase. Involvement in project plans that involve: cost reduction (Engineering / Construction), recovery of progress or expediting of Subcontractors. Coordinate activities to be subcontracted or subcontracted Verification of the absence of interference at the departmental level and between departments. Review and check drawings of the discipline’s work carried out in the Project. Discuss Vendors drawings and from other departments. Inform the Discipline Leader of changes detected, about activities carried out or in progress. Monitoring the correct use and adaptation to work of different tools (NC, Plan4E, NVAT, Documentum, Lessons Learned, etc.) Application of the Quality Control procedures. Participate in the development of the Lessons Learned. Request adequate resources for the design of activities that have previously been subject to the relevant calculations. Performing periodic self-certification of those procedures that apply to its position.<br>Requirements:<br>Valid MMUP/UPDA First Category Engineer certification/registration.<br>Minimum 12–15 years of relevant engineering experience, including substantial experience in Qatar/GCC;Bachelor’s or Master's Degree in Engineering in the relevant discipline;Strong relevant Engineering and Project experience;Previous experience working on major projects in Qatar is highly preferred;Good knowledge of Qatar Engineering standards, regulations, and Project requirements;Strong communication, coordination, and technical skills.

About the Role<br>Qatar Airways are pleased to announce an incredibly exciting opportunity to join our Technical Engineering team as a Licensed Aircraft Engineer Level 1 who is responsible to deliver aircraft Maintenance activities to directly support flight operations maintenance checks and duties within their authority as a Licensed Aircraft Engineer. To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation.<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways procedures. Reviews work procedures, standards and proposes improvements where procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished by the Mechanics. Ensure tasks are performed to meet company/Customer standard and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his range of his authority, and ensure that aircrafts or components serviceability standards are maintained to meet schedule requirements. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. When supervising the wok of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. As per company requirement, must arrange to have equipment, heavy vehicle driving license to facilitate Maintenance task requirements. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>How to apply:If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.<br>Together, everything is possible

About the Role<br>Qatar Airways are pleased to announce an incredibly exciting opportunity to join our Technical Engineering team as a Licensed Aircraft Engineer Level 1 who is responsible to deliver aircraft Maintenance activities to directly support flight operations maintenance checks and duties within their authority as a Licensed Aircraft Engineer. To provide specialized knowledge skills and expertise and require ensuring safe, effective and efficient operation.<br>Operational Plan assigned activities in an effective and efficient manner, operate equipment or use tooling relative to assigned tasks within framework of Qatar Airways procedures. Reviews work procedures, standards and proposes improvements where procedures are not appropriate to ensure work processes are effective. Responsible for the final release of work accomplished by the Mechanics. Ensure tasks are performed to meet company/Customer standard and target such as dispatch reliability and level of acceptable deferred defects. Ensure delivery standard of QR/customer products are met. Aircraft maintenance tasks are accomplished in accordance with laid down policies and procedures. Provide satisfactory support to internal and external customers. Implement solutions to technical problems within his range of his authority, and ensure that aircrafts or components serviceability standards are maintained to meet schedule requirements. Provide guidance and or on the job training to the Technicians and Aircraft Mechanics reporting to this position. When supervising the wok of others, ensuring that acceptable standard of workmanship and quality are maintained and the correct tools are employed to accomplish the task.<br>About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best.<br>Qualifications About You:High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 5 years of job-related experience OR Bachelor's Degree or Equivalent with Minimum 4 years of job-related experience Essential Diploma in Aircraft Maintenance or vocation aircraft maintenance qualification or Degree (B. Eng., BSc) or equivalent in aircraft engineering Must hold minimum 1 full QR main fleet ICAO/QCAA license and approvals. As per company requirement, must arrange to have equipment, heavy vehicle driving license to facilitate Maintenance task requirements. Determining the kind of tools and equipment needed to do a job. Using mathematics to solve problems. Controlling operations of equipment or systems. Managerial skills - Ability to delegate work, set clear direction and manage workflow. Strong mentoring and coaching skills. Ability to train and develop subordinate's skills. Ability to foster teamwork among team members.<br>Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.<br>How to apply:If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.<br>Together, everything is possible

Job Description<br><br>We are seeking a skilled Senior Cloud Security Engineer to join our Cybersecurity Practice. In this role, you will work closely with cloud, infrastructure, network, endpoint, and application teams to design, implement, and maintain enterprise security controls that protect our clients’ digital environments.<br><br>Your responsibilities will span Identity & Access Management (IAM), Data Security, Cloud Security, Endpoint Security, and Network Security. You will support the implementation of security best practices, monitor security posture, identify risks, and contribute to improving the overall security architecture across hybrid IT environments.<br><br>You will assist in assessing security architectures, identifying vulnerabilities, implementing security solutions, and supporting incident response activities to ensure confidentiality, integrity, and availability of systems and data. The role requires hands-on technical expertise, strong analytical capabilities, and the ability to translate security requirements into practical and scalable security solutions.<br><br>Responsibilities<br><br>Enterprise Security Architecture and Risk Assessment:Support the assessment of enterprise IT and cloud environments to identify security risks and recommend appropriate controls across identity, data, network, endpoint, and cloud domains. Conduct security reviews of infrastructure, configurations, and deployments and provide actionable remediation recommendations aligned with industry best practices. Identity and Access Management (IAM):Implement and support secure identity and access controls, including role-based access control (RBAC), least privilege, multi-factor authentication (MFA), privileged access management (PAM), and identity governance practices across enterprise and cloud environments. Data Security:Assist in implementing data protection controls including data classification, encryption at rest and in transit, key management, data loss prevention (DLP), and secure data handling practices to ensure regulatory and organizational compliance. Cloud Security:Support secure configuration and monitoring of public, private, and hybrid cloud platforms. Implement security controls related to IAM, network segmentation, workload protection, encryption, logging, and compliance monitoring. Contribute to cloud security posture management and vulnerability remediation efforts. Endpoint Security:Support deployment and management of endpoint protection solutions including EDR/XDR platforms, antivirus, device control, patch management, and hardening baselines. Monitor endpoint security alerts and assist in incident investigation and response. Security Technology Stack:Support the implementation and management of security platforms and monitoring tools to strengthen security posture, improve visibility, and enhance threat detection across enterprise and cloud environments. Documentation and Reporting:Prepare and maintain documentation related to security configurations, risk assessments, incident reports, and operational procedures. Provide regular security posture updates to internal stakeholders and clients as required.<br><br>Qualifications<br><br>Education: Bachelor’s / college degree in Computer Science, Information Security, or a related field. Experience: At least 5 years of experience in cloud security, cloud infrastructure, cybersecurity operations, or a closely related role. Certifications: Relevant professional certifications are highly desirable. These may include, but are not limited to:Microsoft Azure Security Engineer Associate (AZ-500) Microsoft Certified: Identity and Access Administrator Associate (SC-300) Microsoft Certified: Azure Administrator Associate (AZ-104) Comp TIA Security+, CySA+, or similar ISC2 (e.g., CC or SSCP) CSA or other cloud security certifications.). Technical Skills: Hands-on experience with security technologies including identity platforms (such as Entra ID and Active Directory), cloud-native security tools, endpoint protection solutions (EDR/XDR), network security technologies (firewalls, IDS/IPS, VPN), SIEM and log monitoring solutions, encryption and key management systems, and vulnerability management tools. Familiarity with integrating security controls across enterprise and cloud environments is preferred. Knowledge: Strong understanding of cybersecurity principles including defense-in-depth, zero trust, least privilege, segmentation, encryption, vulnerability management, and incident response. Familiarity with security frameworks and guidelines (e.g., CIS Benchmarks, NIST, ISO 27001) and general compliance/governance concepts. Knowledge of Qatar National Information Assurance (NIA) is a plus.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Key Responsibilities<br><br>Ensures team member adherence to generally accepted engineering and design practices, regulatory requirements, and customer specifications. Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Supports checking, peer reviews, and incorporation of comments and findings. Technical supervision of project designated Offshore Structural designers and draftsmen in the execution of their duty. Preparation /checking of Specifications, data sheets. Performance of bid evaluation and vendor document review and approval. Review the production of detailed designs and drawings, specifications, data, calculations and reports and follow required checking procedures. Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence. Supports Lead Engineer in monitoring quality activities, drives and participates in squad checking, recommends improvements, and takes action where required. Assist Project Team in project documentation such as proposals, estimates, budgets and schedules Manage Offshore Structural design and any design changes within budget and schedule. Prepare and participate in weekly Offshore Structural meetings, prepare progress reports and follow required checking procedures. Review and advice on layouts, site preparation, etc., during technical evaluation stage of bidder’s proposals to assess technical capability and ensure compliance with project specifications Execute verification, studies and detail design following best engineering practices and optimization in term of cost, construction simplicity, operability and maintainability, HSSE. Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval.<br><br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of the Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe working practices. Understand and follow OH&S procedures. Promoting health, safety and environmental awareness. <br><br>Industry Specific Experience<br><br>Vast experience in detail design in conceptual studies, FEED and detailed design of substructure, deck and bridges. Must have experience in Oil and Gas Industry experience in green-field and brown-field projects. Must be available for offshore site surveys.<br><br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Civil or Structural Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.<br><br>IT Skills<br><br>Staad Pro, Sap 2000, Etabs, Safe, Autocad and SACS<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<p>Guildhall is currently supporting a leading engineering company in Doha, Qatar on major road infrastructure and pavement asset management projects. We are currently recruiting for an experienced Pavement Data Collection / Processing Engineer to join their growing team. This is a key role responsible for processing, validating, and quality checking pavement condition data while ensuring the highest standards of accuracy, compliance, and technical excellence across pavement survey projects. Key Responsibilities: - Process, validate, and analyze pavement condition data collected from automated survey systems, ensuring accuracy, consistency, and compliance with project specifications. - Perform QA/QC reviews of pavement data, identify discrepancies, implement corrective actions, and maintain high-quality documentation throughout project delivery. - Conduct pavement condition assessments, evaluate pavement distresses, and support pavement asset management in accordance with ASTM D6433, LTPP, and PCI standards. - Utilize LCMS-2, ROMDAS, Data View, PMS, and GIS platforms (ArcGIS/QGIS) to process, manage, and visualize pavement survey data. - Collaborate with project teams to prepare technical reports, provide project updates, and support the successful delivery of pavement engineering projects.</p><p>-Bachelor's Degree in Civil Engineering, Pavement Engineering, Transportation Engineering, or a related discipline -5–10 years of experience in pavement engineering, pavement condition assessment, or pavement asset management -Strong experience in QA/QC of processed pavement condition data and pavement distress rating -Hands-on experience with LCMS-2 is essential -Experience reviewing and validating pavement distress data, including cracking, rutting, ravelling, bleeding, texture, and roughness -Good understanding of ASTM D6433, LTPP, and pavement condition rating systems (PCI preferred) -Familiarity with ROMDAS, Data View, or similar pavement data processing software -Experience with Pavement Management Systems (PMS) is highly desirable -GCC or international pavement survey project experience is preferred -Experience with ARAN, Hawkeye, or other pavement data collection systems is an advantage -Knowledge of ArcGIS or QGIS is beneficial -Basic Python or R scripting skills for data validation or automation are a plus</p>

Join Saipem and engineer a sustainable future.<br><br>We are a global leader in engineering and construction for the energy and infrastructure sectors, delivering complex onshore and offshore projects worldwide. Driven by technological innovation as “One Company”, our 30,000 people from over 130 nationalities in more than 50 countries work every day to enable the energy transition toward Net Zero. At Saipem, your expertise helps shape the future globally for environmental sustainability.<br><br>Purpose Of The Position<br><br>As Automation Engineer, you will respond/report to the Commissioning Manager and be part of Commissioning Department within the COMP2 Project.<br><br>How can you support us? Here are below your responsibilities:<br><br> Engineering & Design Review Review automation-related deliverables (P&IDs, control logic, I/O lists, loop diagrams, cause & effect charts). Validate vendor documents for PLC, DCS, SCADA, ESD, F&G systems. Ensure alignment with project specifications, international standards, and client requirements. Pre-Commissioning Activities Perform loop checking, continuity, insulation, and calibration activities. Verify installation of field instruments, control panels, and wiring. Execute functional checks before system energization. Coordinate with electrical and mechanical teams for system readiness. Commissioning & Start-up Execute commissioning of automation systems including: PLC/DCS logic testing Cause & effect validation Alarm and interlock verification Perform system integration tests and ensure all subsystems operate as per design. Support start-up activities and ensure smooth transition to operations. Testing & Validation Conduct FAT, SAT, and performance testing. Verify I/O signals, control loops, and process sequences. Troubleshoot automation and instrumentation system issues. Documentation & Handover Prepare and manage: Commissioning procedures Test reports and loop folders As-built documentation and dossiers Ensure full system documentation prior to client handover. Coordination & Interface Management Coordinate with: Engineering teams Construction teams Vendors and subcontractors Client representatives Participate in technical meetings and provide progress reports. HSE & Compliance Ensure adherence to HSE policies during commissioning execution. Participate in HAZOP, risk assessment, and safety reviews. Implement permit-to-work (PTW) and safe commissioning practices <br>What are we looking for?<br><br>Education<br><br>Bachelor's Degree in Electrical Engineering / Instrumentation / Control Engineering / Automation Engineering<br><br>Experience<br><br>5–10+ years experience in EPC projects (Oil & Gas / Energy preferred) Hands-on experience in commissioning stage is essential<br><br>Languages<br><br>English (required); additional languages are an asset.<br><br>Technical Skills<br><br>Control systems: PLC, DCS, SCADA, ESD, F&GField instrumentation: pressure, flow, level, temperature systems Communication protocols: Modbus, Profibus, Ethernet/IP, etc. Testing & commissioning tools Strong knowledge of IEC, ISA, API standards<br><br>What Can We Offer To You<br><br>Permanent Contract – Project-based position Corporate Benefits: We offer a comprehensive benefits package Working Hours: 60 hours (10 hours x 6 days) Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals Location: Qatar – Site<br><br>Additional Information<br><br>We support your development! Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form!<br><br>We embrace diversity! At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br>Safety and Sustainability matter to us! Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br>Find out more on our career page here<br><br>One vision, many paths, limitless possibilities.<br><br>PRIVACY POLICY<br><br>In accordance with the Qatar's Personal Data Privacy Protection Law (PDPPL) enacted as Law No. 13 of 2016 (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D. Lgs 196/03 and art 13 GDPR 679/16)

We currently have an opportunity for a QA/QC Engineer role. This position is based in Qatar onshore.<br> <br>Duration Two (2) year initial contract with a possibility of extension.<br>Work location Onshore (Ras Laffan/Doha HQ)<br> <br>Key Job Accountabilities<br>Provide expertise and support the QA/QC implementation under Operations Expansion Start-Up department (OES) involving quality of engineering, design, procurement, construction, installation of new equipment and repair, modifications of onshore and offshore facilities, consistent with the Codes, Standards, Specifications and Company Policies and Procedures.<br>Context of the role is to provide technical supports to end user in the field of Material, Metallurgy, Fabrication, Welding, NDT and Auditing.<br>Assessment and judgement on resolving concerns for the planned / unplanned equipment, piping repairs and modifications.<br>Ensuring material quality from procurement stage to final receipt at company facility.<br>Coordinate the activities of QA/QC Inspectors, contract hired engineers/inspectors and NDT Technicians, in compliance with procedure requirements.<br>Conduct metallurgical failure analysis on failed plant or offshore components to establish the cause of failure and recommendations.<br>Provide expertise and support for QA/QC matters related to procurement of materials and equipment. Review purchase requisition for inspection and certification requirements, technical bid evaluation, appointment of Third-Party Inspection (TPI) inspectors and ensuring the inspection of material receiving at warehouse.<br>Analyse and review all critical repair instructions including Welding Procedure Specification (WPS), Procedure Qualification Records (PQR) and QA/QC reports that are generated by QA/QC inspectors and engineers, listing alternative testing and inspection methods as applicable for repair or modification.<br>Participate and provide necessary inputs for startup readiness, lessons learnt, Formal Risk Assessment (FRA), Engineering Management of Change (EMOC) and Root Cause Failure Analysis (RCFA) from QA/QC perspective.<br>Provide technical input on the Scope of Work (SOW) for maintenance contracts related to repair and modification works, participating in Technical Bid evaluations for the contracts, reviewing all Contractor documents and ensuring compliance to QA/QC requirements. <br>Coordinate and perform technical audits as requested on suppliers’ and contractors’ Quality Management Systems, providing technical evaluation and recommendation, conducting follow up for the observations and corrective actions. Promote quality awareness among OES-Maintenance, Supply Department and Contractors through training, knowledge sharing, and procedure roll out sessions.<br>Plan and ensure timely execution of inspection and certification of Gas Cylinders, Portable Tanks and Lifting Equipment as per QA/QC section KPI.<br>Communicate understanding of policies and procedures for Project and Plant QA/QC, e.g., material receiving inspection and control of welding, assisting in revision or updating of the same including support for various other QA/QC procedures.<br>Provide support to OES’ Operations Readiness Plan (ORP) process, following up on deliverables, meeting milestone target dates and ensuring proper handover/completion as per Company policy and procedure.<br> <br>Qualification<br>Bachelor’s degree in engineering.<br>Professional certifications in Welding, NDT, Inspection or Auditing. <br> <br>Knowledge and experience<br>4 years’ experience in QA/QC related activities with the oil and gas industry.<br>Conversant in the field of design, engineering, procurement, fabrication, inspection and installation of process equipment and piping, including troubleshooting of welding and QA/QC issues.<br> <br>Technical and Business Skills <br>Proficient in written and spoken English.<br>Computer literate. <br>Good interpersonal and leadership skills.<br>Data analysis and reporting skills.<br>Ability to provide required guidance and technical support to the team.<br> <br> <br><br>People are our business worldwide<br> <br>Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power & Utilities, Constructions & Infrastructure, Manufacturing and Renewables.

<p>Role Overview As a Senior Software Engineer, AI Ops at Scale AI, you will own the long-term technical health, performance, and stability of AI solutions deployed across our strategic public sector partners. While our Delivery Teams build and launch new use cases, you are the technical steward ensuring these deployments operate with Operational Excellence. You will bridge software engineering, MLOps, and client governance, managing tiered SLAs, tracking model drift, and executing maintenance protocols that protect both system integrity and operational margins. Key Responsibilities Handover Gate &amp; Onboarding: Act as the technical gatekeeper during the formal transition from Delivery to Maintenance. Conduct deep-dive reviews to ensure baseline code, prompts, and architecture meet strict maintainability and documentation standards before sign-off. Tiered SLA &amp; Incident Management: Own technical response and resolution targets across multi-tiered service models (from Business-Hours Essential to 24/7 Mission-Critical). Lead Incident Governance, Root Cause Analysis (RCA), and P1/P2 mitigations within strict active support windows. AI Lifecycle Governance: Monitor production model performance, latency, and data drift. Manage prompt configuration repositories to maintain behavioral consistency and perform regression testing when LLM providers update underlying endpoints. Request Classification &amp; Technical Scope: Operationalize the boundary between Routine Maintenance (In-Scope) and System Evolution (Out-of-Scope). Assess incoming client requests and run comparative benchmarking on new AI models. Automation &amp; Reliability Engineering: Eliminate operational toil by engineering self-healing data pipelines, automated RAG indexing syncs, and telemetry tooling. Influence upstream "Delivery" teams to adopt architectural patterns that simplify ongoing maintenance. Client Technical Interface: Serve as the senior technical point of contact for government and enterprise IT leads. Translate technical AI concepts (data drift, prompt versioning, API deprecation) into clear business impacts for non-technical stakeholders.</p><p><strong>Desired Candidate Profile</strong></p><p>Ideally you'd have Background: 5+ years in Software Engineering, MLOps, SRE, or Forward Deployed Engineering in heavy data or production AI environments. Technical Stack: Advanced proficiency in Python, SQL, REST/gRPC APIs, and cloud architecture (AWS, Azure, or GCP). Hands-on experience with MLOps tooling, vector databases, and LLM orchestration frameworks (e.g., LangChain, LlamaIndex). AI Governance Expertise: Practical understanding of prompt version control, model benchmarking against evaluation datasets, RAG pipeline mechanics, and data drift detection. Engineering Mindset: A drive to build systematic, automated fixes rather than applying temporary patches. Strong grasp of CI/CD for machine learning pipelines. Client Acumen &amp; Boundary Control: Strong technical communication skills with the ability to manage client expectations, defend operational boundaries (Maintenance vs. Evolution), and advise on long-term system roadmaps.</p>