Male Nurse Jobs in Qatar

<p>Principal: Qatar District Cooling Company</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment:</p><ul><li>Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings).</li><li>Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure)</li><li>Tank (Structures, valves and fittings, air vents)</li><li>Air handling Units (Filter, ducting, AHU Housing)</li><li>Filtration system (Filters, housings, pipe and fittings)</li><li>Chemical Dosing Pumps, Tanks, Pipe and Fittings system</li><li>Corrosion racks, sampling, blowdown and chemical dosing pipe systems</li></ul><p>Supervise, guide and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)</p><p>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)</p><p>3. Air Compressor</p><p>4. AHU fans and blower</p><p>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels</p><p>6. Mechanical forklift</p><p>7. Mechanical manlift</p><p>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p></p></section>

<p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p><p>Additional Qualifications:</p><p>Safety Observation</p><p><br></p><p>·Raise SO in CMMS when found during shift.</p><p>Security Rounds:</p><p><br></p><p>·&nbsp; &nbsp;Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:</p><p><br></p><p>·&nbsp; &nbsp; Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.</p><p>·&nbsp; &nbsp; Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response</p><p><br></p><p>·&nbsp; &nbsp; Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System</p><p><br></p><p>·&nbsp; &nbsp; Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO</p><p><br></p><p>·&nbsp; &nbsp; Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:</p><p><br></p><p>·&nbsp; &nbsp; &nbsp;Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.</p><p>·&nbsp; &nbsp; &nbsp;Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:</p><p><br></p><p>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:</p><p><br></p><p>·&nbsp; &nbsp; Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:</p><p><br></p><p>·&nbsp; &nbsp; If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis</p><p><br></p><p>·&nbsp; &nbsp; Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:</p><p><br></p><p>·&nbsp; &nbsp; Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.</p><p>·&nbsp; &nbsp; Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization</p><p><br></p><p>·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:</p><p><br></p><p>·&nbsp; &nbsp; &nbsp;Respond to any alarms or alerts and take necessary corrective actions.</p><p>·&nbsp; &nbsp; &nbsp;Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.</p><p>·&nbsp; &nbsp; &nbsp;Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management</p><p><br></p><p>·&nbsp; Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems</p><p><br></p><p>·&nbsp; &nbsp; Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>A well-established engineering and contracting organization in Qatar is looking for an experienced Senior MEP Engineer with strong expertise in mechanical design and water and wastewater infrastructure systems. The ideal candidate should have proven Qatar project experience and hands-on knowledge of STP, wastewater treatment, sewage pumping stations, plumbing, RO, piping, and hydraulic systems.</p><p>Job Title: Senior MEP Engineer</p><p><br></p><p>Key Responsibilities</p><ul><li>Lead and manage mechanical design activities for MEP and infrastructure projects.</li><li>Design and review systems related to STP, wastewater treatment, and sewage pumping stations .</li><li>Develop and review plumbing, piping, RO, and hydraulic systems.</li><li>Perform hydraulic calculations and ensure appropriate system sizing and design.</li><li>Select and specify pumps and other mechanical equipment based on project requirements.</li><li>Prepare and review P&amp;IDs and PFDs .</li><li>Develop and review mechanical layouts, technical drawings, and design documentation.</li><li>Coordinate mechanical designs with civil, electrical, architectural, and other engineering disciplines.</li><li>Review technical specifications, drawings, calculations, and project deliverables.</li><li>Coordinate with consultants, contractors, suppliers, and project stakeholders.</li><li>Ensure designs comply with applicable Qatar standards, project specifications, and regulatory requirements.</li><li>Support site teams during implementation, troubleshooting, testing, and commissioning activities.</li><li>Monitor project progress and coordinate design deliverables using appropriate project management tools.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Mechanical Engineering .</li><li>Minimum 5 years of experience in mechanical design .</li><li>Strong hands-on experience in:</li><ul><li>STP and wastewater treatment systems</li><li>Sewage pumping stations</li><li>Plumbing systems</li><li>RO systems</li><li>Piping systems</li><li>Hydraulic calculations</li><li>Pump selection</li><li>P&amp;IDs</li><li>PFDs</li></ul><li>Proven Qatar project experience is mandatory.</li><li>Valid Qatar MMUP / UPDA / MME registration is mandatory.</li><li>Strong proficiency in AutoCAD .</li><li>Good working knowledge of Microsoft Project .</li><li>Strong technical coordination and problem-solving skills.</li><li>Excellent communication and project coordination abilities.</li><li>Male candidates preferred.</li></ul>

<p>Principal: Qatar District Cooling Company</p><p>Date Open: Feb 19, 2026 Closing Date: May 31, 2026</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot, and diagnostic activities related to MECHANICAL ROTATING ASPECTS of process and non-process equipment and its sub-systems, as below equipment:</p><p>1. Pumps rotating aspects (Mechanical seals, impeller, bearing, shaft, coupling, and joints)<br>2. Cooling tower rotating aspects (Fan blades, shaft, gearbox, coupling, and joints)<br>3. Air Compressor<br>4. AHU fans and blower<br>5. Overhead crane gearbox, pulley, trolley track, drum, wire rope, brake, and wheels<br>6. Mechanical forklift<br>7. Mechanical manlift<br>8. Fan Coil Units and Split Casing Units (Compressors, Outdoor unit, fan, and blowers)</p><p>Supervise, guide, and monitor work done by external vendors.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours as part of business continuity.</p><p>Utilize Computer Maintenance Management Systems (CMMS) as per QCFE.</p><p>Where applicable, aid and support to other team members within and across the discipline, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Male Director of Athletics and Activities - August 2027 Age Group: High School (DP) Qualification: Bachelor Degree in subjects. Preferred experience: At least 2 years in IB but other backgrounds considered for exceptional candidates The school simply looks for good teachers who are willing to adopt the IB philosopy of teaching. Package: Monthly tax free TBC plus free single occupancy apartment (not shared) and free flights, utility allowance, medical insurance and more. This is a family friendly school offering 75% discount on tuition fees for up to 2 children; flights and medical insurance is free for all dependents. This is a wonderfully unique opportunity to join a passionate team of IB educators in a reputable international school located in one of the most flourishing locations in the Middle East. In order to fill this role effectively, the successful candidate will need to have a diverse range of qualities, competencies and experience. An IB teacher should be an adaptable and inspiring educator, with the ability to deliver a coherent, integrated, broad, inquiry-based programme. He/she should be an outstanding teacher, learner, motivator and communicator, with excellent interpersonal skills, and should be capable of preparing students for international programmes in a stimulating, challenging and well-organised learning environment. He/She should be able to provide professional expertise, high quality teaching and learning, make effective use of resources and ensure improved standards of learning and achievement for all students. Applicants are preferred to offer IB experience, although not essential, and must be willing to work in a learning environment which is both multicultural and international. This opportunity is open to all relevantly qualified and experienced applicants, including new graduates, all nationalities and all language speakers as long as you have an excellent fluent command of the English language. The school prefers people with qualified teacher status appropriate to the teaching duties to be undertaken and experience of the IB Programme and they must be willing to work in a learning environment which is both multicultural and international. This opportunity is open to all relevantly qualified and experienced applicants, including new graduates, all nationalities and all language speakers as long as you have an excellent fluent command of the English language. Please contact your Edvectus advisor for more information today.</span> </div>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><p>Chillers</p><p>Process Area of FCU, AHU, and Ventilation System</p><p>Refrigerant recovery, recycling and purifying System</p><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p>The job requires Male applicants.</p><p>Minimum of 5 years working experience is required for this position</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system: Chillers Process Area of FCU, AHU, and Ventilation System Refrigerant recovery, recycling and purifying System On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed. Supervise, guide and monitor work done by external vendors. Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging. Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc. Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant. Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants. Familiarity with vibration analysis, thermography, and other predictive maintenance techniques. Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes. Understanding how to monitor and log key operating parameters to anticipate maintenance needs. Knowledge of environmental regulations related to refrigerant handling and disposal. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns. Work effectively with other team members, including engineers, supervisors, and external vendors. Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves. Where applicable, provide assistance and support to other team members, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law. Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p>Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshoot and diagnostic activities related to the following system:</p><ul><li>Chillers</li><li>Process Area of FCU, AHU, and Ventilation System</li><li>Refrigerant recovery, recycling and purifying System</li></ul><p>On case-to-case basis, to execute maintenance tasks such as (but not limited to) disassembly, assembly, observation, troubleshoots, repairs, tests, data collection of another static and rotating equipment or other devices according to written or verbal instruction from Supervisor in a professional and efficient manner, complying with the safety rules and regulations as needed.</p><p>Supervise, guide and monitor work done by external vendors.</p><p>Performing routine tests, such as checking for leaks, verifying system pressures, Nitrogen charging.</p><p>Performing routine of chiller maintenance, such as condenser and evaporator end covers opening and closing, provides support to perform heat exchanger chemical cleaning, swabbing, ECT etc.</p><p>Performing routine of chiller maintenance, refrigerant transfer, reclaim, oil extract from refrigerant.</p><p>Performing refrigerant recycling and purification activity and provide support to superior on managing, handling and storing refrigerants and other inert gas such as nitrogen within the plants.</p><p>Familiarity with vibration analysis, thermography, and other predictive maintenance techniques.</p><p>Knowledge of how to perform routine maintenance tasks, such as oil changes, filter replacements, and cleaning heat exchanger tubes.</p><p>Understanding how to monitor and log key operating parameters to anticipate maintenance needs.</p><p>Knowledge of environmental regulations related to refrigerant handling and disposal.</p><p>Prepare and submit technical log reports, checklist or forms as part of daily routine work.</p><p>Obtain spare parts, materials, and consumables either from internal store or external location.</p><p>Utilize, maintain and safe keep specific tools assigned by company.</p><p>Maintain proper tools, PPE s, Spares and provide annual requirements.</p><p>Respond to emergency situations during or after hours for the purpose of business continuation and safety concerns.</p><p>Work effectively with other team members, including engineers, supervisors, and external vendors.</p><p>Ability to quickly learn and adapt to new systems, tools, and procedures as technology evolves.</p><p>Where applicable, provide assistance and support to other team members, whenever required.</p><p>Participate in QC provided training as deemed fit by management.</p><p>Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p><p>Adherence to safety protocols, including lockout/tagout procedures for Mechanical and electrical assets related to chiller plant.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>

<p>Position title</p><p>Specialist Secondary Teachers International Academies, Doha, Qatar Immediate Start</p><p>Description</p><p>Step into a rewarding teaching career abroad today! We re seeking passionate Secondary Teachers to join schools in Qatar with an immediate start. These opportunities offer excellent pay and professional growth while placing you at the heart of the Middle East a region rich in culture, history, and adventure. From exploring breathtaking landscapes to immersing yourself in vibrant traditions, you ll enjoy the best of both worlds: career success and unforgettable experiences, starting right away.</p><p>Overview</p><p>Join an exceptional international school in the Middle East, where every day brings new opportunities and discoveries. Set in a stunning location, this school offers not only a world class teaching environment but also the chance to immerse yourself in a vibrant culture and lifestyle filled with adventure. We are recruiting teachers for the following subjects- Humanities English Language (Female) Science (Male) Maths (Female) Special Needs</p><p>The school</p><p>This group of schools is a leading educational network in Qatar, dedicated to nurturing students from early years through secondary education. They emphasise a holistic approach that blends academic excellence with strong values, cultural identity, and modern learning practices. Their programs are designed to prepare students for higher education and future careers, while fostering creativity, critical thinking, and global citizenship. With a commitment to innovation and quality, they provide a supportive environment where learners can thrive both academically and personally.</p><p>Job highlights</p><ul><li>A highly-respected &amp; inspiring international educational organisation</li><li>World-renowned professional development programme</li><li>Flexibility to shape the role moving forward</li><li>Unsurpassed opportunities to drive your career forward</li><li>Considerable salary &amp; personalised benefits package</li></ul><p>The ideal candidate</p><ul><li>Degree in your specialism subject with a PGCE or a BEd Degree in Secondary Education</li><li>At least 2 years experience in your specialist subject</li><li>Must have completed ECT</li><li>Establishes and maintains a high standard of education</li><li>Facilitates an inclusive learning experience for students</li><li>Drive to maintain and improve teaching standards</li><li>Excellent classroom practitioner</li></ul><p>Facts &amp; Figures</p><ul><li>Location: Doha, Qatar</li><li>Job type: Contract</li><li>Duration: 2 years</li><li>Benefits: Visa, flights, furnished accommodation and medical insurance</li><li>Salary range: Competitive and tax-free in line with market conditions and experience</li></ul><p>About ASQ:</p><p>The perfect match between international schools and candidates ASQ International partners with a number of exceptional International schools globally to offer the latest and best selection of educational positions. Kindly send your CV to: Emma Momberg or apply directly online at www.asq-international.com . We look forward to hearing from you. If your application has been successful, we will contact you within 5 days. Please note, even if you are unsuccessful on this occasion, we will keep your details on file in the ASQ Education talent pool, as you could be perfect for one of our future international positions.</p><p><strong>Desired Candidate Profile</strong></p><p>Degree in your specialism subject with a PGCE or a BEd Degree in Secondary Education</p><p>At least 2 years experience in your specialist subject</p><p>Must have completed ECT</p><p>Establishes and maintains a high standard of education</p><p>Facilitates an inclusive learning experience for students</p><p>Drive to maintain and improve teaching standards</p><p>Excellent classroom practitioner</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>JOB PURPOSE:</strong> Steer and train an emergency brigade. Coordinate an internal commission of accidents prevention. Prepare and review security and maintenance procedures. Provide technical support next to the government ministry. Manage all industrial health activities, such as measurements preparation of reports and files and attendance and destination of industrial residues. Provide support to state and security activities. Maintain a direct relationship with public organs involved with administration area. Help security supervisor in contracts management of services rendered (companies, fire equipment, auxiliary and vigilance maintenance).</p><p>KEY ACCOUNTABILITIES</p><p>Health, Safety, and Environmen: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Document Management: Maintain files and records. Document Preparation: Use standard office software to carry out basic formatting of letters, memoranda, and routine reports Internal Communications: Create positive experiences for clients by interacting courteously with them. Quality Assurance: Perform relatively simple quality sampling and inspection of products or processes (or both) Training development and delivery: Help develop training courses either by gathering standard data or by preparing materials using established procedures, formats, and templates Operational Compliance: Follow a range of mandatory procedures to ensure that work is carried out to the required quality standards and/ or to ensure adherence to external regulatory codes and internal codes of conduct. Personal Capability Building: Develop and maintain excellent procedural or technical skills by participating in assessment and development planning activities as well as formal and informal training and coaching Insights and Reporting: Perform basic data reporting tasks to support others by using established procedures. Policy Development and Implementation: Support others by carrying out simple policy-related tasks and following established procedures.</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Gender"> <b>Gender</b> </div> <div class="col is-9 p5" data-automation-id="data_Gender"> Male </div> </div>

<p><b>Additional Qualifications:</b><br>Safety Observation Raise SO in CMMS when found during shift.<br>Security Rounds: Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).<br>Safety Check: Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.<br>Emergency Response Respond to emergencies, such as equipment failures, fires, or spills.<br>PTW System Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.<br>Equipment Line Up / LOTO Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.<br>Equipment Inspection: Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.<br>Parameter Monitoring: Monitor key process parameters (pressure, temperature, flow rate, etc.)<br>System Startup: Initiate the startup procedure for assigned systems, following established checklists and procedures.<br>System Shutdown: If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.<br>Alarm &amp; Event (A&amp;E) Analysis Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.<br>Shift Handover: Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.<br>Plant Optimization Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption.<br>Coordination with CCC Operators.<br>Troubleshooting and Maintenance: Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.<br>Defect Management Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.<br>Monitoring of Chemical Treatment Systems Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.<br>Others and Extras Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor<br>For manpower pooling only.<br>No fees to be collected during the application process.<br>Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate<br>The job requires Male applicants.<br>Minimum of 5 years working experience is required for this position</p>

<p>Safety Observation Raise SO in CMMS when found during shift. Security Rounds: Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check). Safety Check: Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date. Emergency Response Respond to emergencies, such as equipment failures, fires, or spills. PTW System Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities. Equipment Line Up / LOTO Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance. Equipment Inspection: Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed. Parameter Monitoring: Monitor key process parameters (pressure, temperature, flow rate, etc.) System Startup: Initiate the startup procedure for assigned systems, following established checklists and procedures. System Shutdown: If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures. Alarm &amp; Event (A&amp;E) Analysis Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies. Shift Handover: Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing. Plant Optimization Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators. Troubleshooting and Maintenance: Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations. Defect Management Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority. Monitoring of Chemical Treatment Systems Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits. Others and Extras Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p>

<p>Safety Observation Raise SO in CMMS when found during shift. Security Rounds: Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check). Safety Check: Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date. Emergency Response Respond to emergencies, such as equipment failures, fires, or spills. PTW System Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities. Equipment Line Up / LOTO Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance. Equipment Inspection: Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed. Parameter Monitoring: Monitor key process parameters (pressure, temperature, flow rate, etc.) System Startup: Initiate the startup procedure for assigned systems, following established checklists and procedures. System Shutdown: If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures. Alarm &amp; Event (A&amp;E) Analysis Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies. Shift Handover: Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing. Plant Optimization Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators. Troubleshooting and Maintenance: Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations. Defect Management Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority. Monitoring of Chemical Treatment Systems Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits. Others and Extras Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor For manpower pooling only. No fees to be collected during the application process. Mag-ingat sa illegal recruiter.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p>

<p>Career Level Executive Experience 4 Years Gender Male Female Qualifications Degree Bachelor About the Position About the Role Blue Salon is looking for a creative, detail-oriented and highly organized Visual Merchandising Coordinator to support the execution and maintenance of visual merchandising standards across our luxury perfume retail environment. The role will be responsible for coordinating visual merchandising activities, ensuring premium brand presentation, supporting product launches and promotional campaigns, and maintaining a consistent luxury shopping experience across the store. Key Responsibilities Coordinate the implementation of visual merchandising standards and guidelines across the luxury perfume retail environment. Ensure product displays, fixtures, promotional materials, testers and brand assets are presented according to established VM guidelines. Support the execution of new product launches, seasonal campaigns, brand activations, and promotional events . Coordinate with retail teams, store management, suppliers and brand representatives to ensure timely VM execution. Conduct regular store visits and VM checks to ensure displays are maintained to the required standards. Monitor product presentation, stock visibility, tester placement, signage, pricing and promotional communication. Assist with the preparation and installation of window displays, in-store displays, gondolas, counters, and promotional areas . Maintain VM calendars, guidelines, floor plans, display schedules and related documentation. Coordinate the delivery, installation, movement and storage of VM materials and display elements. Take and maintain photographic records of displays for reporting and compliance purposes. Support the VM team with store openings, refurbishments, events and special brand projects . Liaise with suppliers and contractors to ensure VM materials and installations are delivered according to agreed specifications and timelines. Monitor competitor and market trends in luxury beauty, fragrance, and retail visual merchandising and share relevant observations with the team. Ensure all VM activities are completed within agreed timelines and budgets. Support other visual merchandising and retail projects as required.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications &amp; Experience Bachelor s degree or diploma in Visual Merchandising, Fashion, Retail, Marketing, Interior Design or a related field. 2 4 years of experience in visual merchandising, preferably within luxury retail, beauty, fragrance, fashion, or department stores. Experience working with luxury brands or premium retail environments is preferred. Strong understanding of visual merchandising principles, retail presentation, and customer experience. Good organizational and coordination skills, with strong attention to detail. Ability to manage multiple projects and deadlines in a fast-paced retail environment. Good communication and interpersonal skills, with the ability to work effectively with store teams, suppliers, and brand partners. Proficiency in Microsoft Office , particularly PowerPoint and Excel. Knowledge of visual merchandising or design software is an advantage. Proficiency in Arabic is an added advantage. Required skills</p>

<p>The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p><strong>Additional Qualifications:</strong></p><ul><li><strong>Safety Observation</strong> Raise SO in CMMS when found during shift.</li><li><strong>Security Rounds:</strong> Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</li><li><strong>Safety Check:</strong> Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits. Ensure all safety signage is visible and up-to-date.</li><li><strong>Emergency Response</strong> Respond to emergencies, such as equipment failures, fires, or spills.</li><li><strong>PTW System</strong> Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</li><li><strong>Equipment Line Up / LOTO</strong> Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</li><li><strong>Equipment Inspection:</strong> Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation. Check lubrication levels and perform routine lubrication as needed.</li><li><strong>Parameter Monitoring:</strong> Monitor key process parameters (pressure, temperature, flow rate, etc.)</li><li><strong>System Startup:</strong> Initiate the startup procedure for assigned systems, following established checklists and procedures.</li><li><strong>System Shutdown:</strong> If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</li><li><strong>Alarm &amp; Event (A&amp;E) Analysis</strong> Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</li><li><strong>Shift Handover:</strong> Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events. Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</li><li><strong>Plant Optimization</strong> Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</li><li><strong>Troubleshooting and Maintenance:</strong> Respond to any alarms or alerts and take necessary corrective actions. Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts. Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</li><li><strong>Defect Management</strong> Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</li><li><strong>Monitoring of Chemical Treatment Systems</strong> Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</li><li><strong>Others and Extras</strong> Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR). Occasionally attend site visits by visitors or contractors. Perform any other duty as assigned by the Plant Operations Supervisor</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p>